Merge pull request #3809 from ncanceill/easymerge

Easy-to-Merge

README.markdown

@@ -15,9 +15,9 @@ To learn more, visit http://ohmyz.sh and/or follow [ohmyzsh](https://twitter.com
 __Disclaimer:__ _Oh My Zsh works best on Mac OS X and Linux._
 
 * Unix-based operating system (Mac OS X or Linux)
-* [Zsh](http://www.zsh.org) should be installed (v4.3.9 or more recent)
-  * This is commonly pre-installed. (`zsh --version` to confirm)
+* [Zsh](http://www.zsh.org) should be installed (v4.3.9 or more recent). If not pre-installed (`zsh --version` to confirm), check the following instruction here: [Installing-ZSH](https://github.com/robbyrussell/oh-my-zsh/wiki/Installing-ZSH)
 * `curl` or `wget` should be installed
+* `git` should be installed
 
 ### Basic Installation
 
@@ -25,11 +25,11 @@ Oh My Zsh is installed by running one of the following commands in your terminal
 
 #### via curl
 
-`curl -L https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh | sh`
+`sh -c "$(curl -fsSL https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"`
 
 #### via wget
 
-`wget https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh -O - | sh`
+`sh -c "$(wget https://raw.github.com/robbyrussell/oh-my-zsh/master/tools/install.sh -O -)"`
 
 ## Using Oh My Zsh
 
@@ -51,7 +51,7 @@ Most plugins (should! we're working on this) include a __README__, which documen
 
 ### Themes
 
-We'll admit it. Early in the Oh My Zsh world... we may have gotten a far too theme happy. We have over one hundred themes now bundled. Most of them have [screenshots](https://wiki.github.com/robbyrussell/oh-my-zsh/themes) on the wiki. Check them out!
+We'll admit it. Early in the Oh My Zsh world... we may have gotten far too theme happy. We have over one hundred themes now bundled. Most of them have [screenshots](https://wiki.github.com/robbyrussell/oh-my-zsh/themes) on the wiki. Check them out!
 
 #### Selecting a Theme
 
@@ -67,6 +67,8 @@ To use a different theme, simple change the value to match the name of your desi
 
 Open up a new terminal window and your prompt should look something like...
 
+In case you did not find a suitable theme for your needs, please have a look at the wiki for [more themes](https://github.com/robbyrussell/oh-my-zsh/wiki/External-themes).
+
 ## Advanced Topics
 
 If you're the type that likes to get their hands dirty... these sections might resonate.
@@ -154,7 +156,7 @@ We also need people to test out pull-requests. So take a look through [the open
 
 ### Do NOT Send Us Themes
 
-We have (more than) enough themes for the time being. Please fork the project and add one in there – you can let people know how to grab it from there.
+We have (more than) enough themes for the time being. Please add your theme to the [external themes](https://github.com/robbyrussell/oh-my-zsh/wiki/External-themes) wiki page.
 
 ## Contributors
 

lib/git.zsh

@@ -36,24 +36,27 @@ git_remote_status() {
         ahead=$(command git rev-list ${hook_com[branch]}@{upstream}..HEAD 2>/dev/null | wc -l)
         behind=$(command git rev-list HEAD..${hook_com[branch]}@{upstream} 2>/dev/null | wc -l)
 
-        if [ $ahead -eq 0 ] && [ $behind -gt 0 ]
+        if [ $ahead -gt 0 ] && [ $behind -eq 0 ]
         then
-            echo "$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE"
-        elif [ $ahead -gt 0 ] && [ $behind -eq 0 ]
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE"
+            git_remote_status_detailed="$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE$((ahead))%{$reset_color%}"
+        elif [ $behind -gt 0 ] && [ $ahead -eq 0 ] 
         then
-            echo "$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE"
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE"
+            git_remote_status_detailed="$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE$((behind))%{$reset_color%}"
         elif [ $ahead -gt 0 ] && [ $behind -gt 0 ]
         then
-            echo "$ZSH_THEME_GIT_PROMPT_DIVERGED_REMOTE"
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_DIVERGED_REMOTE"
+            git_remote_status_detailed="$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE$((ahead))%{$reset_color%}$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE_COLOR$ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE$((behind))%{$reset_color%}"
         fi
-    fi
-}
 
-# Checks if there are commits ahead from remote
-function git_prompt_ahead() {
-  if $(echo "$(command git log @{upstream}..HEAD 2> /dev/null)" | grep '^commit' &> /dev/null); then
-    echo "$ZSH_THEME_GIT_PROMPT_AHEAD"
-  fi
+        if [ $ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_DETAILED ]
+        then
+            git_remote_status="$ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_PREFIX$remote$git_remote_status_detailed$ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_SUFFIX"
+        fi
+
+        echo $git_remote_status
+    fi
 }
 
 # Gets the number of commits ahead from remote
@@ -64,6 +67,29 @@ function git_commits_ahead() {
   fi
 }
 
+# Outputs if current branch is ahead of remote
+function git_prompt_ahead() {
+  if [[ -n "$(command git rev-list origin/$(current_branch)..HEAD 2> /dev/null)" ]]; then
+    echo "$ZSH_THEME_GIT_PROMPT_AHEAD"
+  fi
+}
+
+# Outputs if current branch is behind remote
+function git_prompt_behind() {
+  if [[ -n "$(command git rev-list HEAD..origin/$(current_branch) 2> /dev/null)" ]]; then
+    echo "$ZSH_THEME_GIT_PROMPT_BEHIND"
+  fi
+}
+
+# Outputs if current branch exists on remote or not
+function git_prompt_remote() {
+  if [[ -n "$(command git show-ref origin/$(current_branch) 2> /dev/null)" ]]; then
+    echo "$ZSH_THEME_GIT_PROMPT_REMOTE_EXISTS"
+  else
+    echo "$ZSH_THEME_GIT_PROMPT_REMOTE_MISSING"
+  fi
+}
+
 # Formats prompt string for current git commit short SHA
 function git_prompt_short_sha() {
   SHA=$(command git rev-parse --short HEAD 2> /dev/null) && echo "$ZSH_THEME_GIT_PROMPT_SHA_BEFORE$SHA$ZSH_THEME_GIT_PROMPT_SHA_AFTER"

lib/misc.zsh

@@ -20,3 +20,6 @@ alias afind='ack-grep -il'
 if [[ -z "$LC_CTYPE" && -z "$LC_ALL" ]]; then
 	export LC_CTYPE=${LANG%%:*} # pick the first entry from LANG
 fi
+
+# recognize comments
+setopt interactivecomments

oh-my-zsh.sh

@@ -14,7 +14,7 @@ if [[ -z "$ZSH_CUSTOM" ]]; then
     ZSH_CUSTOM="$ZSH/custom"
 fi
 
-# Set ZSH_CACHE_DIR to the path where cache files sould be created
+# Set ZSH_CACHE_DIR to the path where cache files should be created
 # or else we will use the default cache/
 if [[ -z "$ZSH_CACHE_DIR" ]]; then
   ZSH_CACHE_DIR="$ZSH/cache/"
@@ -29,6 +29,11 @@ for config_file ($ZSH/lib/*.zsh); do
   source $config_file
 done
 
+# Load all of your custom configurations from custom/
+for config_file ($ZSH_CUSTOM/*.zsh(N)); do
+  source $config_file
+done
+unset config_file
 
 is_plugin() {
   local base_dir=$1
@@ -72,12 +77,6 @@ for plugin ($plugins); do
   fi
 done
 
-# Load all of your custom configurations from custom/
-for config_file ($ZSH_CUSTOM/*.zsh(N)); do
-  source $config_file
-done
-unset config_file
-
 # Load the theme
 if [ "$ZSH_THEME" = "random" ]; then
   themes=($ZSH/themes/*zsh-theme)

plugins/adb/_adb

@@ -16,14 +16,22 @@ _1st_arguments=(
 'help:show the help message'
 'install:push this package file to the device and install it'
 'jdwp:list PIDs of processes hosting a JDWP transport'
-'logcat:View device log'
+'kill-server:kill the server if it is running'
+'logcat:view device log'
 'pull:copy file/dir from device'
 'push:copy file/dir to device'
+'reboot:reboots the device, optionally into the bootloader or recovery program'
+'reboot-bootloader:reboots the device into the bootloader'
+'remount:remounts the partitions on the device read-write'
+'root:restarts the adbd daemon with root permissions'
+'sideload:push a ZIP to device and install it'
 'shell:run remote shell interactively'
 'sync:copy host->device only if changed (-l means list but dont copy)'
-‘tcpip:restart host adb in tcpip mode’
+'start-server:ensure that there is a server running'
+'tcpip:restart host adb in tcpip mode'
 'uninstall:remove this app package from the device'
 'version:show version num'
+'wait-for-device:block until device is online'
 )
 
 local expl

plugins/apache2-macports/README.md

@@ -0,0 +1,19 @@
+## APACHE2 MACPORTS PLUGIN
+
+
+---
+
+### FEATURES
+
+| Alias          | Function                                                                       | Description           |
+|:--------------:|:-------------------------------------------------------------------------------|----------------------:|
+| apache2restart | sudo /opt/local/etc/LaunchDaemons/org.macports.apache2/apache2.wrapper restart | Restart apache daemon |
+| apache2start   | sudo /opt/local/etc/LaunchDaemons/org.macports.apache2/apache2.wrapper start   | Start apache daemon   |
+| apache2stop    | sudo /opt/local/etc/LaunchDaemons/org.macports.apache2/apache2.wrapper stop    | Stop apache daemon    |
+
+---
+
+### CONTRIBUTORS
+ - Alexander Rinass (alex@rinass.net)
+
+---

plugins/archlinux/README.md

@@ -0,0 +1,64 @@
+## ARCHLINUX PLUGIN
+
+
+---
+
+### FEATURES
+
+| Alias        | Function                                | Description                                                                                                         |
+|:------------:|-----------------------------------------|:--------------------------------------------------------------------------------------------------------------------|
+| pacin        | sudo pacman -S                          | Install specific package(s) from the repositories                                                                   |
+| pacins       | sudo pacman -U                          | Install specific package not from the repositories but from a file                                                  |
+| pacinsd      | sudo pacman -S --asdeps                 | Install given package(s) as dependencies of another package                                                         |
+| pacloc       | pacman -Qi                              | Display information about a given package in the local database                                                     |
+| paclocs      | pacman -Qs                              | Search for package(s) in the local database                                                                         |
+| paclsorphans | sudo pacman -Qdt'                       | List all orphaned packages                                                                                          |
+| pacmir       | sudo pacman -Syy                        | Force refresh of all package lists after updating /etc/pacman.d/mirrorlist                                          |
+| pacre        | sudo pacman -R                          | Remove the specified package(s), retaining its configuration(s) and required dependencies                           |
+| pacrem       | sudo pacman -Rns                        | Remove the specified package(s), its configuration(s) and unneeded dependencies                                     |
+| pacrep       | pacman -Si                              | Display information about a given package in the repositories                                                       |
+| pacreps      | pacman -Ss                              | Search for package(s) in the repositories                                                                           |
+| pacrmorphans | sudo pacman -Rs $(pacman -Qtdq)'        | Delete all orphaned packages                                                                                        |
+| pacupd       | sudo pacman -Sy && sudo abs && sudo aur | Update and refresh the local package, ABS and AUR databases against repositories                                    |
+| pacupd       | sudo pacman -Sy && sudo abs             | Update and refresh the local package and ABS databases against repositories                                         |
+| pacupd       | sudo pacman -Sy && sudo aur             | Update and refresh the local package and AUR databases against repositories                                         |
+| pacupd       | sudo pacman -Sy                         | Update and refresh the local package database against repositories                                                  |
+| pacupg       | sudo pacman -Syu                        | Synchronize with repositories before upgrading packages that are out of date on the local system.                   |
+| yaconf       | yaourt -C                               | Fix all configuration files with vimdiff                                                                            |
+| yain         | yaourt -S                               | Install specific package(s) from the repositories                                                                   |
+| yains        | yaourt -U                               | Install specific package not from the repositories but from a file                                                  |
+| yainsd       | yaourt -S --asdeps                      | Install given package(s) as dependencies of another package                                                         |
+| yaloc        | yaourt -Qi                              | Display information about a given package in the local database                                                     |
+| yalocs       | yaourt -Qs                              | Search for package(s) in the local database                                                                         |
+| yalst        | yaourt -Qe                              | List installed packages, even those installed from AUR (they're tagged as "local")                                  |
+| yamir        | yaourt -Syy                             | Force refresh of all package lists after updating /etc/pacman.d/mirrorlist                                          |
+| yaorph       | yaourt -Qtd                             | Remove orphans using yaourt                                                                                         |
+| yare         | yaourt -R                               | Remove the specified package(s), retaining its configuration(s) and required dependencies                           |
+| yarem        | yaourt -Rns                             | Remove the specified package(s), its configuration(s) and unneeded dependencies                                     |
+| yarep        | yaourt -Si                              | Display information about a given package in the repositories                                                       |
+| yareps       | yaourt -Ss                              | Search for package(s) in the repositories                                                                           |
+| yasu         | yaourt --sucre                          | Same as yaupg, but without confirmation                                                                             |
+| yaupd        | yaourt -Sy && sudo abs && sudo aur      | Update and refresh the local package, ABS and AUR databases against repositories                                    |
+| yaupd        | yaourt -Sy && sudo abs                  | Update and refresh the local package and ABS databases against repositories                                         |
+| yaupd        | yaourt -Sy && sudo aur                  | Update and refresh the local package and AUR databases against repositories                                         |
+| yaupd        | yaourt -Sy                              | Update and refresh the local package database against repositories                                                  |
+| yaupg        | yaourt -Syua                            | Synchronize with repositories before upgrading packages (AUR packages too) that are out of date on the local system |
+
+| Function       | Description                                                                                                       |
+|----------------|:------------------------------------------------------------------------------------------------------------------|
+| pacdisowned    | List all disowned files in your system                                                                            |
+| paclist        | List all installed packages with a short description - [Source](https://bbs.archlinux.org/viewtopic.php?id=93683) |
+| pacmanallkeys  | Get all keys for developers and trusted users                                                                     |
+| pacmansignkeys |                                                                                                                   |
+
+---
+
+### CONTRIBUTORS
+ - Benjamin Boudreau - dreurmail@gmail.com
+ - Celso Miranda - contacto@celsomiranda.net
+ - KhasMek - Boushh@gmail.com
+ - Martin Putniorz - mputniorz@gmail.com
+ - MatthR3D - matthr3d@gmail.com
+ - ornicar - thibault.duplessis@gmail.com
+
+---

plugins/archlinux/archlinux.plugin.zsh

@@ -2,7 +2,7 @@
 # Usage is also described at https://github.com/robbyrussell/oh-my-zsh/wiki/Plugins
 
 # Look for yaourt, and add some useful functions if we have it.
-if [[ -x `which yaourt` ]]; then
+if [[ -x `command -v yaourt` ]]; then
   upgrade () {
     yaourt -Syu
   }
@@ -21,11 +21,11 @@ if [[ -x `which yaourt` ]]; then
   alias yalst='yaourt -Qe'         # List installed packages, even those installed from AUR (they're tagged as "local")
   alias yaorph='yaourt -Qtd'       # Remove orphans using yaourt
   # Additional yaourt alias examples
-  if [[ -x `which abs` && -x `which aur` ]]; then
+  if [[ -x `command -v abs` && -x `command -v aur` ]]; then
     alias yaupd='yaourt -Sy && sudo abs && sudo aur'  # Update and refresh the local package, ABS and AUR databases against repositories
-  elif [[ -x `which abs` ]]; then
+  elif [[ -x `command -v abs` ]]; then
     alias yaupd='yaourt -Sy && sudo abs'   # Update and refresh the local package and ABS databases against repositories
-  elif [[ -x `which aur` ]]; then
+  elif [[ -x `command -v aur` ]]; then
     alias yaupd='yaourt -Sy && sudo aur'   # Update and refresh the local package and AUR databases against repositories
   else
     alias yaupd='yaourt -Sy'               # Update and refresh the local package database against repositories
@@ -49,11 +49,11 @@ alias pacreps='pacman -Ss'             # Search for package(s) in the repositori
 alias pacloc='pacman -Qi'              # Display information about a given package in the local database
 alias paclocs='pacman -Qs'             # Search for package(s) in the local database
 # Additional pacman alias examples
-if [[ -x `which abs` && -x `which aur` ]]; then
+if [[ -x `command -v abs` && -x `command -v aur` ]]; then
   alias pacupd='sudo pacman -Sy && sudo abs && sudo aur'  # Update and refresh the local package, ABS and AUR databases against repositories
-elif [[ -x `which abs` ]]; then
+elif [[ -x `command -v abs` ]]; then
   alias pacupd='sudo pacman -Sy && sudo abs'              # Update and refresh the local package and ABS databases against repositories
-elif [[ -x `which aur` ]]; then
+elif [[ -x `command -v aur` ]]; then
   alias pacupd='sudo pacman -Sy && sudo aur'              # Update and refresh the local package and AUR databases against repositories
 else
   alias pacupd='sudo pacman -Sy'     # Update and refresh the local package database against repositories

plugins/atom/README.md

@@ -0,0 +1,17 @@
+## atom
+
+Plugin for Atom, a cross platform text and code editor, available for Linux, Mac OS X, and Windows.
+
+### Requirements
+
+ * [Atom](https://atom.io/)
+
+### Usage
+
+ * If `at` command is called without an argument, launch Atom
+
+ * If `at` is passed a directory, `cd` to it and open it in Atom
+
+ * If `at` is passed a file, open it in Atom
+
+ * if `att` command is called, it is equivalent to `at .`, opening the current folder in Atom

plugins/aws/aws.plugin.zsh

@@ -22,7 +22,7 @@ function aws_profiles {
 compctl -K aws_profiles asp
 
 if _homebrew-installed && _awscli-homebrew-installed ; then
-  _aws_zsh_completer_path=$(brew --prefix)/opt/awscli/libexec/bin/aws_zsh_completer.sh
+  _aws_zsh_completer_path=$(brew --prefix awscli)/libexec/bin/aws_zsh_completer.sh
 else
   _aws_zsh_completer_path=$(which aws_zsh_completer.sh)
 fi

plugins/bgnotify/bgnotify.plugin.zsh

@@ -33,9 +33,9 @@ bgnotify () {
   if hash terminal-notifier 2>/dev/null; then #osx
     terminal-notifier -message "$2" -title "$1"
   elif hash growlnotify 2>/dev/null; then #osx growl
-    growlnotify -m $1 $2
+    growlnotify -m "$1" "$2"
   elif hash notify-send 2>/dev/null; then #ubuntu!
-    notify-send $1 $2
+    notify-send "$1" "$2"
   elif hash notifu 2>/dev/null; then #cygwyn support!
     notifu /m "$2" /p "$1"
   fi

plugins/brew/_brew

@@ -35,6 +35,7 @@ _1st_arguments=(
   'info:information about a formula'
   'install:install a formula'
   'reinstall:install a formula anew; re-using its current options'
+  'leaves:show installed formulae that are not dependencies of another installed formula'
   'link:link a formula'
   'list:list files in a formula or not-installed formulae'
   'log:git commit log for a formula'

plugins/bundler/README.md

@@ -39,7 +39,7 @@ This will exclude the `foreman` and `spin` gems (i.e. their executable) from bei
 
 ## Excluded gems
 
-These gems should not be called with `bundle exec`. Please see the Issues on GitHub for clarification.
+These gems should not be called with `bundle exec`. Please see [issue #2923](https://github.com/robbyrussell/oh-my-zsh/pull/2923) on GitHub for clarification.
 
 `berks`
 `foreman`

plugins/docker/_docker

@@ -100,11 +100,6 @@ __info() {
     # no arguments
 }
 
-__insert() {
-    __docker_images
-    _arguments '*:files:_files'
-}
-
 __inspect() {
     __docker_images
     __docker_all_containers
@@ -278,7 +273,6 @@ _1st_arguments=(
     "images":"List images"
     "import":"Create a new filesystem image from the contents of a tarball"
     "info":"Display system-wide information"
-    "insert":"Insert a file in an image"
     "inspect":"Return low-level information on a container"
     "kill":"Kill a running container"
     "load":"Load an image from a tar archive"
@@ -335,8 +329,6 @@ case "$words[1]" in
         __import ;;
     info)
         __info ;;
-    insert)
-        __insert ;;
     inspect)
         __inspect ;;
     kill)

plugins/forklift/README.md

@@ -0,0 +1,13 @@
+## forklift
+
+Plugin for ForkLift, an FTP application for OS X.
+
+### Requirements
+
+* [ForkLift](http://forkliftapp.com/forklift/)
+
+### Usage
+
+* If `fl` is called without arguments then the current folder is opened in ForkLift. Is equivalent to `fl .`
+
+* If `fl` is called with a directory as the argument, then that directory is opened in ForkLift

plugins/history-substring-search/README.markdown

@@ -1,6 +1,6 @@
 To activate this script, please include it the `plugins` variable within `~/.zshrc`
 
-  `plugins=(git history-substring-search.zsh)`
+  `plugins=(git history-substring-search)`
 
 See the "history-substring-search.zsh" file for more information:
 

plugins/history/README.md

@@ -0,0 +1,15 @@
+## history
+
+Provides a couple of convenient aliases for using the `history` command to examine your command line history.
+
+### Requirements
+
+* None.
+
+### Usage
+
+* If `h` is called, your command history is listed. Equivalent to using `history`
+
+* If `hsi` is called with an argument, a **case insensitive** `grep` search is performed on your command history, looking for commands that match the argument provided
+
+* If `hsi` is called without an argument you will help on `grep` arguments

plugins/httpie/README.md

@@ -0,0 +1,6 @@
+## HTTPie
+**Maintainer:** [lululau](https://github.com/lululau)
+
+This plugin adds completion for HTTPie, which is a command line HTTP client, a user-friendly cURL replacement. 
+
+[HTTPie Homepage](http://httpie.org)

plugins/jira/jira.plugin.zsh

@@ -49,6 +49,20 @@ open_jira_issue () {
     else
       $open_cmd  "$jira_url/browse/$jira_prefix$1"
     fi
+  else 
+    local addcomment=''
+    if [[ "$2" == "m" ]]; then
+      addcomment="#add-comment"
+      echo "Add comment to issue #$1"
+    else
+      echo "Opening issue #$1"
+    fi
+    
+    if [[ "x$JIRA_RAPID_BOARD" = "xtrue" ]]; then
+      $open_cmd  "$jira_url/issues/$1$addcomment"
+    else
+      $open_cmd  "$jira_url/browse/$1$addcomment"
+    fi
   fi
 }
 

plugins/jump/jump.plugin.zsh

@@ -13,7 +13,7 @@ jump() {
 }
 
 mark() {
-	if (( $# == 0 )); then
+	if [[ ( $# == 0 ) || ( "$1" == "." ) ]]; then
 		MARK=$(basename "$PWD")
 	else
 		MARK="$1"

plugins/kitchen/_kitchen

@@ -0,0 +1,41 @@
+# author: Peter Eisentraut
+# source: https://gist.github.com/petere/10307599
+# compdef kitchen
+
+_kitchen() {
+	local curcontext="$curcontext" state line
+	typeset -A opt_args
+
+	_arguments '1: :->cmds'\
+	           '2: :->args'
+
+	case $state in
+		cmds)
+			_arguments "1:Commands:(console converge create destroy diagnose driver help init list login setup test verify version)"
+			;;
+		args)
+			case $line[1] in
+				converge|create|destroy|diagnose|list|setup|test|verify)
+					compadd "$@" all
+					_kitchen_instances
+					;;
+				login)
+					_kitchen_instances
+					;;
+			esac
+			;;
+	esac
+}
+
+_kitchen_instances() {
+	if [[ $_kitchen_instances_cache_dir != $PWD ]]; then
+		unset _kitchen_instances_cache
+	fi
+	if [[ ${+_kitchen_instances_cache} -eq 0 ]]; then
+		_kitchen_instances_cache=(${(f)"$(bundle exec kitchen list -b 2>/dev/null || kitchen list -b 2>/dev/null)"})
+		_kitchen_instances_cache_dir=$PWD
+	fi
+	compadd -a _kitchen_instances_cache
+}
+
+_kitchen "$@"

plugins/laravel5/laravel5.plugin.zsh

@@ -15,6 +15,6 @@ compdef _laravel5 la5
 #Alias
 alias la5='php artisan'
 
-alias la5dump='php artisan dump-autoload'
 alias la5cache='php artisan cache:clear'
-alias la5routes='php artisan routes'
+alias la5routes='php artisan route:list'
+alias la5vendor='php artisan vendor:publish'

plugins/last-working-dir/last-working-dir.plugin.zsh

@@ -15,7 +15,7 @@ function chpwd() {
 
 # Changes directory to the last working directory.
 function lwd() {
-	[[ ! -r "$cache_file" ]] || cd `cat "$cache_file"`
+	[[ ! -r "$cache_file" ]] || cd "`cat "$cache_file"`"
 }
 
 # Automatically jump to last working directory unless this isn't the first time

plugins/mercurial/README.md

@@ -0,0 +1,64 @@
+# Mercurial plugin
+### Usage
+Update .zshrc:
+
+1. Add name to the list of plugins, e.g. `plugins = (..., mercurial, ...)`
+   (that is pretty obvious).
+2. Change PROMPT variable of current theme to contain current folder mercurial repo info:
+
+   robbyrussel theme is used by default, so you need to modify PROMPT var
+   from [this file](https://github.com/robbyrussell/oh-my-zsh/blob/master/themes/robbyrussell.zsh-theme)
+   by adding `$(hg_prompt_info)` after `$(git_prompt_info)`, so currently it
+   looks next:
+
+   ```diff
+   - PROMPT='${ret_status}%{$fg_bold[green]%}%p %{$fg[cyan]%}%c %{$fg_bold[blue]%}$(git_prompt_info)%{$fg_bold[blue]%} % %{$reset_color%}'
+   + PROMPT='${ret_status}%{$fg_bold[green]%}%p %{$fg[cyan]%}%c %{$fg_bold[blue]%}$(git_prompt_info)$(hg_prompt_info)%{$fg_bold[blue]%} % %{$reset_color%}'
+   ```
+   
+   and put modified var at the end of **.zshrc**.
+3. Initialize additional vars used in plugin. So in short put next in **.zshrc**:
+   
+   ```
+   ZSH_THEME_HG_PROMPT_PREFIX="%{$fg_bold[magenta]%}hg:(%{$fg[red]%}"
+   ZSH_THEME_HG_PROMPT_SUFFIX="%{$reset_color%}"
+   ZSH_THEME_HG_PROMPT_DIRTY="%{$fg[magenta]%}) %{$fg[yellow]%}✗%{$reset_color%}"
+   ZSH_THEME_HG_PROMPT_CLEAN="%{$fg[magenta]%})"
+   ```
+
+### What's inside?
+#### Adds handy aliases:
+###### general
+* `hgc` - `hg commit`
+* `hgb` - `hg branch`
+* `hgba` - `hg branches`
+* `hgbk` - `hg bookmarks`
+* `hgco` - `hg checkout`
+* `hgd`  - `hg diff`
+* `hged` - `hg diffmerge`
+
+###### pull and update
+* `hgi` - `hg incoming`
+* `hgl` - `hg pull -u`
+* `hglr` - `hg pull --rebase`
+* `hgo` - `hg outgoing`
+* `hgp` - `hg push`
+* `hgs` - `hg status`
+* `hgsl` - `hg log --limit 20 --template "{node|short} | {date|isodatesec} | {author|user}: {desc|strip|firstline}\n"`
+
+###### this is the 'git commit --amend' equivalent
+* `hgca` - `hg qimport -r tip ; hg qrefresh -e ; hg qfinish tip`
+
+###### list unresolved files (since hg does not list unmerged files in the status command)
+* `hgun` - `hg resolve --list`
+
+#### Displays repo branch and directory status in prompt
+This is the same as git plugin does.
+
+**Note**: additional changes to **.zshrc** are required in order for this to
+work.
+
+### Mantainers
+[ptrv](https://github.com/ptrv) - original creator
+
+[oshybystyi](https://github.com/oshybystyi) - created this README and know how most of code works

plugins/mix-fast/README.md

@@ -0,0 +1,28 @@
+# mix-fast
+
+Fast mix autocompletion plugin.
+
+This script caches the output for later usage and significantly speeds it up.
+It generates a .mix_tasks cache file for current project. Currently if you want
+to update cache you should remove .mix_tasks file
+
+Inspired by and based on rake-fast zsh plugin.
+
+This is entirely based on [this pull request by Ullrich Schäfer](https://github.com/robb/.dotfiles/pull/10/), which is inspired by [this Ruby on Rails trick from 2006](http://weblog.rubyonrails.org/2006/3/9/fast-mix-task-completion-for-zsh/).
+
+
+## Installation
+
+Just add the plugin to your `.zshrc`:
+
+```bash
+plugins=(foo bar mix-fast)
+```
+
+You might consider adding `.mix_tasks` to your [global .gitignore](https://help.github.com/articles/ignoring-files#global-gitignore)
+
+## Usage
+
+`mix`, then press tab
+
+Currently maintained by [styx](https://github.com/styx/)

plugins/mix-fast/mix-fast.plugin.zsh

@@ -0,0 +1,29 @@
+_mix_refresh () {
+  if [ -f .mix_tasks ]; then
+    rm .mix_tasks
+  fi
+  echo "Generating .mix_tasks..." > /dev/stderr
+  _mix_generate
+  cat .mix_tasks
+}
+
+_mix_does_task_list_need_generating () {
+  [ ! -f .mix_tasks ];
+}
+
+_mix_generate () {
+  mix --help | grep -v 'iex -S' | tail -n +2 | cut -d " " -f 2 > .mix_tasks
+}
+
+_mix () {
+  if [ -f mix.exs ]; then
+    if _mix_does_task_list_need_generating; then
+      echo "\nGenerating .mix_tasks..." > /dev/stderr
+      _mix_generate
+    fi
+    compadd `cat .mix_tasks`
+  fi
+}
+
+compdef _mix mix
+alias mix_refresh='_mix_refresh'

plugins/mix/_mix

@@ -1,28 +1,43 @@
-#compdef mix 
+#compdef mix
 #autoload
 
 # Elixir mix zsh completion
 
 local -a _1st_arguments
 _1st_arguments=(
-    'archive:Archive this project into a .ez file'
-    'clean:Clean generated application files'
+    'app.start:Start all registered apps'
+    'archive:List all archives'
+    'archive.build:Archive this project into a .ez file'
+    'archive.install:Install an archive locally'
+    'archive.uninstall:Uninstall archives'
+    'clean:Delete generated application files'
+    'cmd:Executes the given command'
     'compile:Compile source files'
+    'compile.protocols:Consolidates all protocols in all paths'
     'deps:List dependencies and their status'
-    "deps.clean:Remove dependencies' files"
+    "deps.clean:Remove the given dependencies' files"
     'deps.compile:Compile dependencies'
     'deps.get:Get all out of date dependencies'
     'deps.unlock:Unlock the given dependencies'
-    'deps.update:Update dependencies'
-    'do:Executes the commands separated by comma'
-    'escriptize:Generates an escript for the project'
+    'deps.update:Update the given dependencies'
+    'do:Executes the tasks separated by comma'
+    'escript.build:Builds an escript for the project'
     'help:Print help information for tasks'
+    'hex:Print hex help information'
+    'hex.config:Read or update hex config'
+    'hex.docs:Publish docs for package'
+    'hex.info:Print hex information'
+    'hex.key:Hex API key tasks'
+    'hex.outdated:Shows outdated hex deps for the current project'
+    'hex.owner:Hex package ownership tasks'
+    'hex.publish:Publish a new package version'
+    'hex.search:Search for package names'
+    'hex.user:Hex user tasks'
+    'loadconfig:Loads and persists the given configuration'
     'local:List local tasks'
-    'local.install:Install a task or an archive locally'
+    'local.hex:Install hex locally'
     'local.rebar:Install rebar locally'
-    'local.uninstall:Uninstall local tasks or archives'
-    'local.hex:Install Hex locally'
-    'new:Creates a new Elixir project'
+    'new:Create a new Elixir project'
     'run:Run the given file or expression'
     "test:Run a project's tests"
     '--help:Describe available tasks'
@@ -34,7 +49,7 @@ __task_list ()
     local expl
     declare -a tasks
 
-    tasks=(archive clean compile deps deps.clean deps.compile deps.get deps.unlock deps.update do escriptize help local local.install local.rebar local.uninstall new run test)
+    tasks=(app.start archive archive.build archive.install archive.uninstall clean cmd compile compile.protocols deps deps.clean deps.compile deps.get deps.unlock deps.update do escript.build help hex hex.config hex.docs hex.info hex.key hex.outdated hex.owner hex.publish hex.search hex.user loadconfig local local.hex local.rebar new run test)
 
     _wanted tasks expl 'help' compadd $tasks
 }
@@ -57,7 +72,7 @@ case $state in
   (options)
     case $line[1] in
       (help)
-         _arguments ':feature:__task_list' 
+         _arguments ':feature:__task_list'
     esac
   ;;
 esac

plugins/osx/osx.plugin.zsh

@@ -138,23 +138,6 @@ function man-preview() {
   man -t "$@" | open -f -a Preview
 }
 
-function trash() {
-  local trash_dir="${HOME}/.Trash"
-  local temp_ifs="$IFS"
-  IFS=$'\n'
-  for item in "$@"; do
-    if [[ -e "$item" ]]; then
-      item_name="$(basename $item)"
-      if [[ -e "${trash_dir}/${item_name}" ]]; then
-        mv -f "$item" "${trash_dir}/${item_name} $(date "+%H-%M-%S")"
-      else
-        mv -f "$item" "${trash_dir}/"
-      fi
-    fi
-  done
-  IFS=$temp_ifs
-}
-
 function vncviewer() {
   open vnc://$@
 }

plugins/paver/paver.plugin.zsh

@@ -0,0 +1,16 @@
+_paver_does_target_list_need_generating () {
+  [ ! -f .paver_targets ] && return 0;
+  [ pavement.py -nt .paver_targets ] && return 0;
+  return 1;
+}
+
+_paver () {
+  if [ -f pavement.py ]; then
+    if _paver_does_target_list_need_generating; then
+      paver --help 2>&1 |grep '-'|grep -v -e '--'|awk -F '-' '{print $1}'|tr -d ' ' > .paver_targets
+    fi
+    compadd `cat .paver_targets`
+  fi
+}
+
+compdef _paver paver

plugins/rails/rails.plugin.zsh

@@ -59,7 +59,7 @@ alias rn='rake notes'
 alias rr='rake routes'
 
 # legacy stuff
-alias ss='thin --stats "/thin/stats" start'
+alias sstat='thin --stats "/thin/stats" start'
 alias sg='ruby script/generate'
 alias sd='ruby script/destroy'
 alias sp='ruby script/plugin'

plugins/rails3/rails3.plugin.zsh

@@ -1,4 +0,0 @@
-echo "It looks like you have been using the 'rails3' plugin,"
-echo "which has been deprecated in favor of a newly consolidated 'rails' plugin."
-echo "You will want to modify your ~/.zshrc configuration to begin using it."
-echo "Learn more at https://github.com/robbyrussell/oh-my-zsh/pull/2240"

plugins/rails4/rails4.plugin.zsh

@@ -1,4 +0,0 @@
-echo "It looks like you have been using the 'rails4' plugin,"
-echo "which has been deprecated in favor of a newly consolidated 'rails' plugin."
-echo "You will want to modify your ~/.zshrc configuration to begin using it."
-echo "Learn more at https://github.com/robbyrussell/oh-my-zsh/pull/2240"

plugins/sublime/README.md

@@ -14,4 +14,6 @@ Plugin for Sublime Text, a cross platform text and code editor, available for Li
 
  * If `st` is passed a file, open it in Sublime Text
 
- * if `stt` command is called, it is equivalent to `st .`, opening the current folder in Sublime Text
+ * If `stt` command is called, it is equivalent to `st .`, opening the current folder in Sublime Text
+ 
+ * If `sst` command is called, it is like `sudo st`, opening the file or folder in Sublime Text. Useful for editing system protected files.

plugins/sublime/sublime.plugin.zsh

@@ -5,6 +5,7 @@ if [[ $('uname') == 'Linux' ]]; then
     _sublime_linux_paths=(
         "$HOME/bin/sublime_text"
         "/opt/sublime_text/sublime_text"
+        "/opt/sublime_text_3/sublime_text"
         "/usr/bin/sublime_text"
         "/usr/local/bin/sublime_text"
         "/usr/bin/subl"
@@ -33,7 +34,7 @@ elif  [[ "$OSTYPE" = darwin* ]]; then
 
     for _sublime_path in $_sublime_darwin_paths; do
         if [[ -a $_sublime_path ]]; then
-            alias subl="'$_sublime_path'"
+            subl () { "$_sublime_path" $* }
             alias st=subl
             break
         fi

plugins/taskwarrior/taskwarrior.plugin.zsh

@@ -8,7 +8,7 @@
 # TaskWarrior<http://taskwarrior.org/>. It uses the zsh tab completion
 # script (_task) distributed with TaskWarrior for the completion definitions.
 #
-# Typing task[tabtab] will give you a list of current tasks, task 66[tabtab]
+# Typing task [tabtab] will give you a list of current tasks, task 66[tabtab]
 # gives a list of available modifications for that task, etc.
 ################################################################################
 

plugins/tugboat/_tugboat

@@ -0,0 +1,106 @@
+#compdef tugboat
+#autoload
+
+# Tugboat zsh autocompletion
+
+
+local -a _commands
+_commands=(
+  'add-key:[NAME] Upload an ssh public key.'
+  'authorize:Authorize a DigitalOcean account with tugboat.'
+  'create:[NAME] Create a droplet.'
+  'destroy:[FUZZY_NAME] Destroy a droplet.'
+  'destroy_image:[FUZZY_NAME] Destroy an image.'
+  'droplets:Retrieve a list of your droplets.'
+  'halt:[FUZZY_NAME] Shutdown a droplet.'
+  'help:[COMMAND] Describe commands or a specific command.'
+  'images:Retrieve a list of your images.'
+  'info:[FUZZY_NAME] [OPTIONS] Show a droplets information.'
+  'info_image:[FUZZY_NAME] [OPTIONS] Show an images information.'
+  'keys:Show available SSH keys.'
+  'password-reset:[FUZZY_NAME] Reset root password.'
+  'rebuild:[FUZZY_NAME] [IMAGE_NAME] Rebuild a droplet.'
+  'regions:Show regions.'
+  'resize:[FUZZY_NAME -s, --size=N] Resize a droplet.'
+  'restart:[FUZZY_NAME] Restart a droplet.'
+  'sizes:Show available droplet sizes.'
+  'snapshot:[SNAPSHOT_NAME] [FUZZY_NAME] [OPTIONS] Queue a snapshot of the droplet.'
+  'ssh:[FUZZY_NAME] SSH into a droplet.'
+  'start:[FUZZY_NAME] Start a droplet.'
+  'verify:Check your DigitalOcean credentials.'
+  'version:Show version.'
+  'wait:[FUZZY_NAME] Wait for a droplet to reach a state.'
+)
+
+local -a _create_arguments
+_create_arguments=(
+  '-s:[--size=N] The size_id of the droplet'
+  '-i:[--image=N] The image_id of the droplet'
+  '-r:[--region=N] The region_id of the droplet'
+  '-k:[--keys=KEYS] A comma separated list of SSH key ids to add to the droplet'
+  '-p:[--private-networking] Enable private networking on the droplet'
+  '-b:[--backups-enabled] Enable backups on the droplet'
+  '-q:[--quiet]'
+)
+
+__task_list ()
+{
+  local expl
+  declare -a tasks
+
+  arguments=(add-key authorize create destroy destroy_image droplets halt help images info info_image keys password-reset rebuild regions resize restart sizes snapshot ssh start verify version wait)
+
+  _wanted tasks expl 'help' compadd $arguments
+}
+
+__droplets_list ()
+{
+    _wanted application expl 'command' compadd $(command tugboat droplets | cut -d " " -f1)
+}
+
+__tugboat-create ()
+{
+    local curcontext="$curcontext" state line
+    typeset -A opt_args
+
+    _arguments -C \
+        ':command:->command' \
+        '*::options:->options'
+
+    case $state in
+        (command)
+            _describe -t commands "gem subcommand" _create_arguments
+            return
+        ;;
+    esac
+}
+
+local curcontext="$curcontext" state line
+typeset -A opt_args
+
+_arguments -C \
+    ':command:->command' \
+    '*::options:->options'
+
+case $state in
+  (command)
+    _describe -t commands "gem subcommand" _commands
+    return
+  ;;
+
+  (options)
+    case $line[1] in
+      (help)
+        _arguments ':feature:__task_list'
+      ;;
+
+      (ssh)
+        _arguments ':feature:__droplets_list'
+      ;;
+
+      (create)
+        _arguments ':feature:__tugboat-create'
+      ;;
+    esac
+  ;;
+esac

plugins/vi-mode/README.md

@@ -0,0 +1,75 @@
+vi-mode
+=======
+This plugin increase `vi-like` zsh functionality.
+
+Use `ESC` or `CTRL-[` to enter `Normal mode`.
+
+
+History
+-------
+
+- `ctrl-p` : Previous command in history
+- `ctrl-n` : Next command in history
+- `/`      : Search backward in history
+- `n`      : Repeat the last `/`
+
+
+Mode indicators
+---------------
+
+*Normal mode* is indicated with red `<<<` mark at the right prompt, when it
+wasn't defined by theme.
+
+
+Vim edition
+-----------
+
+- `v`   : Edit current command line in Vim
+
+
+Movement
+--------
+
+- `$`   : To the end of the line
+- `^`   : To the first non-blank character of the line
+- `0`   : To the first character of the line
+- `w`   : [count] words forward
+- `W`   : [count] WORDS forward
+- `e`   : Forward to the end of word [count] inclusive
+- `E`   : Forward to the end of WORD [count] inclusive
+- `b`   : [count] words backward
+- `B`   : [count] WORDS backward
+- `t{char}`   : Till before [count]'th occurrence of {char} to the right
+- `T{char}`   : Till before [count]'th occurrence of {char} to the left
+- `f{char}`   : To [count]'th occurrence of {char} to the right
+- `F{char}`   : To [count]'th occurrence of {char} to the left
+- `;`   : Repeat latest f, t, F or T [count] times
+- `,`   : Repeat latest f, t, F or T in opposite direction
+
+
+Insertion
+---------
+
+- `i`   : Insert text before the cursor
+- `I`   : Insert text before the first character in the line
+- `a`   : Append text after the cursor
+- `A`   : Append text at the end of the line
+- `o`   : Insert new command line below the current one
+- `O`   : Insert new command line above the current one
+
+
+Delete and Insert
+-----------------
+
+- `ctrl-h`      : While in *Insert mode*: delete character after the cursor
+- `ctrl-w`      : While in *Insert mode*: delete word after the cursor
+- `d{motion}`   : Delete text that {motion} moves over
+- `dd`          : Delete line
+- `D`           : Delete characters under the cursor until the end of the line
+- `c{motion}`   : Delete {motion} text and start insert
+- `cc`          : Delete line and start insert
+- `C`           : Delete to the end of the line and start insert
+- `r{char}`     : Replace the character under the cursor with {char}
+- `R`           : Enter replace mode: Each character replaces existing one
+- `x`           : Delete [count] characters under and after the cursor
+- `X`           : Delete [count] characters before the cursor

plugins/virtualenvwrapper/virtualenvwrapper.plugin.zsh

@@ -1,10 +1,18 @@
 virtualenvwrapper='virtualenvwrapper.sh'
 
 if (( $+commands[$virtualenvwrapper] )); then
-  source ${${virtualenvwrapper}:c}
+  function {
+    setopt local_options
+    unsetopt equals
+    source ${${virtualenvwrapper}:c}
+  }
 elif [[ -f "/etc/bash_completion.d/virtualenvwrapper" ]]; then
-  virtualenvwrapper="/etc/bash_completion.d/virtualenvwrapper"
-  source "/etc/bash_completion.d/virtualenvwrapper"
+  function {
+    setopt local_options
+    unsetopt equals
+    virtualenvwrapper="/etc/bash_completion.d/virtualenvwrapper"
+    source "/etc/bash_completion.d/virtualenvwrapper"
+  }
 else
   print "zsh virtualenvwrapper plugin: Cannot find ${virtualenvwrapper}.\n"\
         "Please install with \`pip install virtualenvwrapper\`" >&2

plugins/web-search/web-search.plugin.zsh

@@ -11,6 +11,7 @@ function web_search() {
     yahoo       "https://search.yahoo.com/search?p="
     duckduckgo  "https://www.duckduckgo.com/?q="
     yandex      "https://yandex.ru/yandsearch?text="
+    github      "https://github.com/search?q="
   )
 
   # define the open command
@@ -49,6 +50,7 @@ alias google='web_search google'
 alias yahoo='web_search yahoo'
 alias ddg='web_search duckduckgo'
 alias yandex='web_search yandex'
+alias github='web_search github'
 
 #add your own !bang searches here
 alias wiki='web_search duckduckgo \!w'

plugins/zeus/zeus.plugin.zsh

@@ -19,8 +19,8 @@ alias zsr='zeus server'
 alias zerver='zeus server'
 
 # Rake
-alias zr='zeus rake'
-alias zake='zeus rake'
+alias zr='noglob zeus rake'
+alias zake='noglob zeus rake'
 
 # Generate
 alias zg='zeus generate'

themes/adben.zsh-theme

@@ -42,7 +42,7 @@ GREEN_BASE_START="${PR_RESET}${PR_GREY}>${PR_RESET}${PR_GREEN}>${PR_BRIGHT_GREEN
 GREEN_START_P1="${PR_RESET}${GREEN_BASE_START}${PR_RESET} "
 DIVISION="${PR_RESET}${PR_RED} < ${PR_RESET}"
 VCS_DIRTY_COLOR="${PR_RESET}${PR_YELLOW}"
-Vcs_CLEAN_COLOR="${PR_RESET}${PR_GREEN}"
+VCS_CLEAN_COLOR="${PR_RESET}${PR_GREEN}"
 VCS_SUFIX_COLOR="${PR_RESET}${PR_RED}› ${PR_RESET}"
 # ########## COLOR ###########
 # ########## SVN ###########

themes/agnoster.zsh-theme

@@ -126,7 +126,7 @@ prompt_hg() {
       if `hg st | grep -q "^\?"`; then
         prompt_segment red black
         st='±'
-      elif `hg st | grep -q "^(M|A)"`; then
+      elif `hg st | grep -q "^[MA]"`; then
         prompt_segment yellow black
         st='±'
       else

themes/avit.zsh-theme

@@ -38,34 +38,32 @@ function _ruby_version() {
 # Determine the time since last commit. If branch is clean,
 # use a neutral color, otherwise colors will vary according to time.
 function _git_time_since_commit() {
-  if git rev-parse --git-dir > /dev/null 2>&1; then
-    # Only proceed if there is actually a commit.
-    if [[ $(git log 2>&1 > /dev/null | grep -c "^fatal: bad default revision") == 0 ]]; then
-      # Get the last commit.
-      last_commit=$(git log --pretty=format:'%at' -1 2> /dev/null)
-      now=$(date +%s)
-      seconds_since_last_commit=$((now-last_commit))
+# Only proceed if there is actually a commit.
+  if git log -1 > /dev/null 2>&1; then
+    # Get the last commit.
+    last_commit=$(git log --pretty=format:'%at' -1 2> /dev/null)
+    now=$(date +%s)
+    seconds_since_last_commit=$((now-last_commit))
 
-      # Totals
-      minutes=$((seconds_since_last_commit / 60))
-      hours=$((seconds_since_last_commit/3600))
+    # Totals
+    minutes=$((seconds_since_last_commit / 60))
+    hours=$((seconds_since_last_commit/3600))
 
-      # Sub-hours and sub-minutes
-      days=$((seconds_since_last_commit / 86400))
-      sub_hours=$((hours % 24))
-      sub_minutes=$((minutes % 60))
+    # Sub-hours and sub-minutes
+    days=$((seconds_since_last_commit / 86400))
+    sub_hours=$((hours % 24))
+    sub_minutes=$((minutes % 60))
 
-      if [ $hours -gt 24 ]; then
-          commit_age="${days}d"
-      elif [ $minutes -gt 60 ]; then
-          commit_age="${sub_hours}h${sub_minutes}m"
-      else
-          commit_age="${minutes}m"
-      fi
-
-      color=$ZSH_THEME_GIT_TIME_SINCE_COMMIT_NEUTRAL
-      echo "$color$commit_age%{$reset_color%}"
+    if [ $hours -gt 24 ]; then
+      commit_age="${days}d"
+    elif [ $minutes -gt 60 ]; then
+      commit_age="${sub_hours}h${sub_minutes}m"
+    else
+      commit_age="${minutes}m"
     fi
+
+    color=$ZSH_THEME_GIT_TIME_SINCE_COMMIT_NEUTRAL
+    echo "$color$commit_age%{$reset_color%}"
   fi
 }
 
@@ -99,4 +97,3 @@ ZSH_THEME_GIT_TIME_SINCE_COMMIT_NEUTRAL="%{$fg[grey]%}"
 export LSCOLORS="exfxcxdxbxegedabagacad"
 export LS_COLORS='di=34;40:ln=35;40:so=32;40:pi=33;40:ex=31;40:bd=34;46:cd=34;43:su=0;41:sg=0;46:tw=0;42:ow=0;43:'
 export GREP_COLOR='1;33'
-

themes/michelebologna.zsh-theme

@@ -1,44 +1,74 @@
-# reference colors
-GREEN="%{$fg_bold[green]%}"
-RED="%{$fg_bold[red]%}"
-CYAN="%{$fg_bold[cyan]%}"
-YELLOW="%{$fg_bold[yellow]%}"
-BLUE="%{$fg_bold[blue]%}"
-MAGENTA="%{$fg_bold[magenta]%}"
-WHITE="%{$fg_bold[white]%}"
+# Michele Bologna's theme
+# http://michelebologna.net
+#
+# This a theme for oh-my-zsh. Features a colored prompt with:
+# * username@host: [jobs] [git] workdir % 
+# * hostname color is based on hostname characters. When using as root, the 
+# prompt shows only the hostname in red color.
+# * [jobs], if applicable, counts the number of suspended jobs tty
+# * [git], if applicable, represents the status of your git repo (more on that
+# later)
+# * '%' prompt will be green if last command return value is 0, yellow otherwise.
+# 
+# git prompt is inspired by official git contrib prompt: 
+# https://github.com/git/git/tree/master/contrib/completion/git-prompt.sh
+# and it adds:
+# * the current branch
+# * '%' if there are untracked files
+# * '$' if there are stashed changes
+# * '*' if there are modified files
+# * '+' if there are added files
+# * '<' if local repo is behind remote repo
+# * '>' if local repo is ahead remote repo
+# * '=' if local repo is equal to remote repo (in sync)
+# * '<>' if local repo is diverged
 
-COLOR_ARRAY=($GREEN $RED $CYAN $YELLOW $BLUE $MAGENTA $WHITE)
+local green="%{$fg_bold[green]%}"
+local red="%{$fg_bold[red]%}"
+local cyan="%{$fg_bold[cyan]%}"
+local yellow="%{$fg_bold[yellow]%}"
+local blue="%{$fg_bold[blue]%}"
+local magenta="%{$fg_bold[magenta]%}"
+local white="%{$fg_bold[white]%}"
+local reset="%{$reset_color%}"
 
-# color reset
-RESET_COLOR="%{$reset_color%}"
+local -a color_array
+color_array=($green $red $cyan $yellow $blue $magenta $white)
 
-# which color should be applied?
-USERNAME_NORMAL_COLOR=$WHITE
-USERNAME_ROOT_COLOR=$RED
-HOSTNAME_NORMAL_COLOR=$BLUE
-# uncomment next line if you want auto-generated hostname color
-#for i in $HOST; HOSTNAME_NORMAL_COLOR=$COLOR_ARRAY[$[((#i))%7+1]]
-HOSTNAME_ROOT_COLOR=$RED
-HOSTNAME_COLOR=%(!.$HOSTNAME_ROOT_COLOR.$HOSTNAME_NORMAL_COLOR)
-CURRENT_DIR_COLOR=$CYAN
+local username_normal_color=$white
+local username_root_color=$red
+local hostname_root_color=$red
 
-# zsh commands
-USERNAME_COMMAND="%n"
-HOSTNAME_COMMAND="%m"
-CURRENT_DIR="%~"
+# calculating hostname color with hostname characters
+for i in `hostname`; local hostname_normal_color=$color_array[$[((#i))%7+1]]
+local -a hostname_color
+hostname_color=%(!.$hostname_root_color.$hostname_normal_color)
 
-# output: colors + commands
-USERNAME_OUTPUT="%(!..$USERNAME_NORMAL_COLOR$USERNAME_COMMAND$RESET_COLOR@)"
-HOSTNAME_OUTPUT="$HOSTNAME_COLOR$HOSTNAME_COMMAND$RESET_COLOR"
-CURRENT_DIR_OUTPUT="$CURRENT_DIR_COLOR$CURRENT_DIR"
-LAST_COMMAND_OUTPUT="%(?.%(!.$RED.$GREEN).$YELLOW)"
+local current_dir_color=$blue
+local username_command="%n"
+local hostname_command="%m"
+local current_dir="%~"
 
-# git theming
-ZSH_THEME_GIT_PROMPT_PREFIX="("
+local username_output="%(!..$username_normal_color$username_command$reset@)"
+local hostname_output="$hostname_color$hostname_command$reset"
+local current_dir_output="$current_dir_color$current_dir$reset"
+local jobs_bg="${red}fg: %j$reset"
+local last_command_output="%(?.%(!.$red.$green).$yellow)"
+
+ZSH_THEME_GIT_PROMPT_PREFIX=""
 ZSH_THEME_GIT_PROMPT_SUFFIX=""
-ZSH_THEME_GIT_PROMPT_DIRTY=")$RED*"
-ZSH_THEME_GIT_PROMPT_CLEAN=")"
+ZSH_THEME_GIT_PROMPT_DIRTY=""
+ZSH_THEME_GIT_PROMPT_CLEAN=""
+ZSH_THEME_GIT_PROMPT_UNTRACKED="%%"
+ZSH_THEME_GIT_PROMPT_MODIFIED="*"
+ZSH_THEME_GIT_PROMPT_ADDED="+"
+ZSH_THEME_GIT_PROMPT_STASHED="$"
+ZSH_THEME_GIT_PROMPT_EQUAL_REMOTE="="
+ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE=">"
+ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE="<"
+ZSH_THEME_GIT_PROMPT_DIVERGED_REMOTE="<>"
 
-# wrap all together
-PROMPT='$USERNAME_OUTPUT$HOSTNAME_OUTPUT:$CURRENT_DIR_OUTPUT $LAST_COMMAND_OUTPUT%#$RESET_COLOR '
-RPROMPT='%1(j.fg: [%j].) $GREEN$(git_prompt_info)$RESET_COLOR [%@]'
+PROMPT='$username_output$hostname_output:$current_dir_output%1(j. [$jobs_bg].)'
+PROMPT+='$(__git_ps1)'
+PROMPT+=" $last_command_output%#$reset "
+RPROMPT=''

themes/strug.zsh-theme

@@ -0,0 +1,25 @@
+# terminal coloring
+export CLICOLOR=1
+export LSCOLORS=dxFxCxDxBxegedabagacad
+
+local git_branch='$(git_prompt_info)%{$reset_color%}$(git_remote_status)'
+
+PROMPT="%{$fg[green]%}╭─%n@%m %{$reset_color%}%{$fg[yellow]%}in %~ %{$reset_color%}${git_branch}
+%{$fg[green]%}╰\$ %{$reset_color%}"
+
+ZSH_THEME_GIT_PROMPT_PREFIX="%{$fg_bold[yellow]%}on "
+ZSH_THEME_GIT_PROMPT_SUFFIX="%{$reset_color%}"
+
+ZSH_THEME_GIT_PROMPT_DIRTY="%{$reset_color%}%{$fg[red]%} ✘ %{$reset_color%}"
+ZSH_THEME_GIT_PROMPT_CLEAN="%{$fg[green]%} ✔ %{$reset_color%}"
+
+ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_DETAILED=true
+ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_PREFIX="%{$fg[yellow]%}("
+ZSH_THEME_GIT_PROMPT_REMOTE_STATUS_SUFFIX="%{$fg[yellow]%})%{$reset_color%}"
+
+ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE=" +"
+ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE_COLOR=%{$fg[green]%}
+
+ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE=" -"
+ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE_COLOR=%{$fg[red]%}
+

tools/check_for_upgrade.sh

@@ -41,10 +41,9 @@ then
     then
       _upgrade_zsh
     else
-      echo "[Oh My Zsh] Would you like to check for updates?"
-      echo "Type Y to update oh-my-zsh: \c"
+      echo "[Oh My Zsh] Would you like to check for updates? [Y/n]: \c"
       read line
-      if [ "$line" = Y ] || [ "$line" = y ]; then
+      if [ "$line" = Y ] || [ "$line" = y ] || [ -z "$line" ]; then
         _upgrade_zsh
       else
         _update_zsh_update