onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
package onedrive
import (
"context"
"encoding/json"
"errors"
"fmt"
"net/http"
2024-09-25 17:02:36 +02:00
"slices"
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
"strings"
"time"
"github.com/rclone/rclone/backend/onedrive/api"
"github.com/rclone/rclone/fs"
2024-04-15 22:17:22 +02:00
"github.com/rclone/rclone/fs/fserrors"
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
"github.com/rclone/rclone/lib/dircache"
2024-04-11 14:51:38 +02:00
"github.com/rclone/rclone/lib/errcount"
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
)
const (
dirMimeType = "inode/directory"
timeFormatIn = time . RFC3339
timeFormatOut = "2006-01-02T15:04:05.999Z" // mS for OneDrive Personal, otherwise only S
)
// system metadata keys which this backend owns
var systemMetadataInfo = map [ string ] fs . MetadataHelp {
"content-type" : {
Help : "The MIME type of the file." ,
Type : "string" ,
Example : "text/plain" ,
ReadOnly : true ,
} ,
"mtime" : {
Help : "Time of last modification with S accuracy (mS for OneDrive Personal)." ,
Type : "RFC 3339" ,
Example : "2006-01-02T15:04:05Z" ,
} ,
"btime" : {
Help : "Time of file birth (creation) with S accuracy (mS for OneDrive Personal)." ,
Type : "RFC 3339" ,
Example : "2006-01-02T15:04:05Z" ,
} ,
"utime" : {
Help : "Time of upload with S accuracy (mS for OneDrive Personal)." ,
Type : "RFC 3339" ,
Example : "2006-01-02T15:04:05Z" ,
ReadOnly : true ,
} ,
"created-by-display-name" : {
Help : "Display name of the user that created the item." ,
Type : "string" ,
Example : "John Doe" ,
ReadOnly : true ,
} ,
"created-by-id" : {
Help : "ID of the user that created the item." ,
Type : "string" ,
Example : "48d31887-5fad-4d73-a9f5-3c356e68a038" ,
ReadOnly : true ,
} ,
"description" : {
Help : "A short description of the file. Max 1024 characters. Only supported for OneDrive Personal." ,
Type : "string" ,
Example : "Contract for signing" ,
} ,
"id" : {
Help : "The unique identifier of the item within OneDrive." ,
Type : "string" ,
Example : "01BYE5RZ6QN3ZWBTUFOFD3GSPGOHDJD36K" ,
ReadOnly : true ,
} ,
"last-modified-by-display-name" : {
Help : "Display name of the user that last modified the item." ,
Type : "string" ,
Example : "John Doe" ,
ReadOnly : true ,
} ,
"last-modified-by-id" : {
Help : "ID of the user that last modified the item." ,
Type : "string" ,
Example : "48d31887-5fad-4d73-a9f5-3c356e68a038" ,
ReadOnly : true ,
} ,
"malware-detected" : {
Help : "Whether OneDrive has detected that the item contains malware." ,
Type : "boolean" ,
Example : "true" ,
ReadOnly : true ,
} ,
"package-type" : {
Help : "If present, indicates that this item is a package instead of a folder or file. Packages are treated like files in some contexts and folders in others." ,
Type : "string" ,
Example : "oneNote" ,
ReadOnly : true ,
} ,
"shared-owner-id" : {
Help : "ID of the owner of the shared item (if shared)." ,
Type : "string" ,
Example : "48d31887-5fad-4d73-a9f5-3c356e68a038" ,
ReadOnly : true ,
} ,
"shared-by-id" : {
Help : "ID of the user that shared the item (if shared)." ,
Type : "string" ,
Example : "48d31887-5fad-4d73-a9f5-3c356e68a038" ,
ReadOnly : true ,
} ,
"shared-scope" : {
Help : "If shared, indicates the scope of how the item is shared: anonymous, organization, or users." ,
Type : "string" ,
Example : "users" ,
ReadOnly : true ,
} ,
"shared-time" : {
Help : "Time when the item was shared, with S accuracy (mS for OneDrive Personal)." ,
Type : "RFC 3339" ,
Example : "2006-01-02T15:04:05Z" ,
ReadOnly : true ,
} ,
"permissions" : {
Help : "Permissions in a JSON dump of OneDrive format. Enable with --onedrive-metadata-permissions. Properties: id, grantedTo, grantedToIdentities, invitation, inheritedFrom, link, roles, shareId" ,
Type : "JSON" ,
Example : "{}" ,
} ,
}
// rwChoices type for fs.Bits
type rwChoices struct { }
func ( rwChoices ) Choices ( ) [ ] fs . BitsChoicesInfo {
return [ ] fs . BitsChoicesInfo {
{ Bit : uint64 ( rwOff ) , Name : "off" } ,
{ Bit : uint64 ( rwRead ) , Name : "read" } ,
{ Bit : uint64 ( rwWrite ) , Name : "write" } ,
2024-05-14 13:27:03 +02:00
{ Bit : uint64 ( rwFailOK ) , Name : "failok" } ,
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
}
// rwChoice type alias
type rwChoice = fs . Bits [ rwChoices ]
const (
rwRead rwChoice = 1 << iota
rwWrite
2024-05-14 13:27:03 +02:00
rwFailOK
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
rwOff rwChoice = 0
)
// Examples for the options
var rwExamples = fs . OptionExamples { {
Value : rwOff . String ( ) ,
Help : "Do not read or write the value" ,
} , {
Value : rwRead . String ( ) ,
Help : "Read the value only" ,
} , {
Value : rwWrite . String ( ) ,
Help : "Write the value only" ,
} , {
Value : ( rwRead | rwWrite ) . String ( ) ,
Help : "Read and Write the value." ,
2024-05-14 13:27:03 +02:00
} , {
Value : rwFailOK . String ( ) ,
Help : "If writing fails log errors only, don't fail the transfer" ,
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
} }
// Metadata describes metadata properties shared by both Objects and Directories
type Metadata struct {
fs * Fs // what this object/dir is part of
remote string // remote, for convenience when obj/dir not in scope
mimeType string // Content-Type of object from server (may not be as uploaded)
description string // Provides a user-visible description of the item. Read-write. Only on OneDrive Personal
mtime time . Time // Time of last modification with S accuracy.
btime time . Time // Time of file birth (creation) with S accuracy.
utime time . Time // Time of upload with S accuracy.
createdBy api . IdentitySet // user that created the item
lastModifiedBy api . IdentitySet // user that last modified the item
malwareDetected bool // Whether OneDrive has detected that the item contains malware.
packageType string // If present, indicates that this item is a package instead of a folder or file.
shared * api . SharedType // information about the shared state of the item, if shared
normalizedID string // the normalized ID of the object or dir
permissions [ ] * api . PermissionsType // The current set of permissions for the item. Note that to save API calls, this is not guaranteed to be cached on the object. Use m.Get() to refresh.
queuedPermissions [ ] * api . PermissionsType // The set of permissions queued to be updated.
permsAddOnly bool // Whether to disable "update" and "remove" (for example, during server-side copy when the dst will have new IDs)
}
// Get retrieves the cached metadata and converts it to fs.Metadata.
// This is most typically used when OneDrive is the source (as opposed to the dest).
// If m.fs.opt.MetadataPermissions includes "read" then this will also include permissions, which requires an API call.
// Get does not use an API call otherwise.
func ( m * Metadata ) Get ( ctx context . Context ) ( metadata fs . Metadata , err error ) {
metadata = make ( fs . Metadata , 17 )
metadata [ "content-type" ] = m . mimeType
metadata [ "mtime" ] = m . mtime . Format ( timeFormatOut )
metadata [ "btime" ] = m . btime . Format ( timeFormatOut )
metadata [ "utime" ] = m . utime . Format ( timeFormatOut )
metadata [ "created-by-display-name" ] = m . createdBy . User . DisplayName
metadata [ "created-by-id" ] = m . createdBy . User . ID
if m . description != "" {
metadata [ "description" ] = m . description
}
metadata [ "id" ] = m . normalizedID
metadata [ "last-modified-by-display-name" ] = m . lastModifiedBy . User . DisplayName
metadata [ "last-modified-by-id" ] = m . lastModifiedBy . User . ID
metadata [ "malware-detected" ] = fmt . Sprint ( m . malwareDetected )
if m . packageType != "" {
metadata [ "package-type" ] = m . packageType
}
if m . shared != nil {
metadata [ "shared-owner-id" ] = m . shared . Owner . User . ID
metadata [ "shared-by-id" ] = m . shared . SharedBy . User . ID
metadata [ "shared-scope" ] = m . shared . Scope
metadata [ "shared-time" ] = time . Time ( m . shared . SharedDateTime ) . Format ( timeFormatOut )
}
if m . fs . opt . MetadataPermissions . IsSet ( rwRead ) {
p , _ , err := m . fs . getPermissions ( ctx , m . normalizedID )
if err != nil {
return nil , fmt . Errorf ( "failed to get permissions: %w" , err )
}
m . permissions = p
if len ( p ) > 0 {
fs . PrettyPrint ( m . permissions , "perms" , fs . LogLevelDebug )
buf , err := json . Marshal ( m . permissions )
if err != nil {
return nil , fmt . Errorf ( "failed to marshal permissions: %w" , err )
}
metadata [ "permissions" ] = string ( buf )
}
}
return metadata , nil
}
// Set takes fs.Metadata and parses/converts it to cached Metadata.
// This is most typically used when OneDrive is the destination (as opposed to the source).
// It does not actually update the remote (use Write for that.)
// It sets only the writeable metadata properties (i.e. read-only properties are skipped.)
// Permissions are included if m.fs.opt.MetadataPermissions includes "write".
// It returns errors if writeable properties can't be parsed.
// It does not return errors for unsupported properties that may be passed in.
// It returns the number of writeable properties set (if it is 0, we can skip the Write API call.)
func ( m * Metadata ) Set ( ctx context . Context , metadata fs . Metadata ) ( numSet int , err error ) {
numSet = 0
for k , v := range metadata {
k , v := k , v
switch k {
case "mtime" :
t , err := time . Parse ( timeFormatIn , v )
if err != nil {
return numSet , fmt . Errorf ( "failed to parse metadata %q = %q: %w" , k , v , err )
}
m . mtime = t
numSet ++
case "btime" :
t , err := time . Parse ( timeFormatIn , v )
if err != nil {
return numSet , fmt . Errorf ( "failed to parse metadata %q = %q: %w" , k , v , err )
}
m . btime = t
numSet ++
case "description" :
if m . fs . driveType != driveTypePersonal {
fs . Debugf ( m . remote , "metadata description is only supported for OneDrive Personal -- skipping: %s" , v )
continue
}
m . description = v
numSet ++
case "permissions" :
if ! m . fs . opt . MetadataPermissions . IsSet ( rwWrite ) {
continue
}
var perms [ ] * api . PermissionsType
err := json . Unmarshal ( [ ] byte ( v ) , & perms )
if err != nil {
return numSet , fmt . Errorf ( "failed to unmarshal permissions: %w" , err )
}
m . queuedPermissions = perms
numSet ++
default :
fs . Debugf ( m . remote , "skipping unsupported metadata item: %s: %s" , k , v )
}
}
if numSet == 0 {
fs . Infof ( m . remote , "no writeable metadata found: %v" , metadata )
}
return numSet , nil
}
// toAPIMetadata converts object/dir Metadata to api.Metadata for API calls.
// If btime is missing but mtime is present, mtime is also used as the btime, as otherwise it would get overwritten.
func ( m * Metadata ) toAPIMetadata ( ) api . Metadata {
update := api . Metadata {
FileSystemInfo : & api . FileSystemInfoFacet { } ,
}
if m . description != "" && m . fs . driveType == driveTypePersonal {
update . Description = m . description
}
if ! m . mtime . IsZero ( ) {
update . FileSystemInfo . LastModifiedDateTime = api . Timestamp ( m . mtime )
}
if ! m . btime . IsZero ( ) {
update . FileSystemInfo . CreatedDateTime = api . Timestamp ( m . btime )
}
if m . btime . IsZero ( ) && ! m . mtime . IsZero ( ) { // use mtime as btime if missing
m . btime = m . mtime
update . FileSystemInfo . CreatedDateTime = api . Timestamp ( m . btime )
}
return update
}
// Write takes the cached Metadata and sets it on the remote, using API calls.
// If m.fs.opt.MetadataPermissions includes "write" and updatePermissions == true, permissions are also set.
// Calling Write without any writeable metadata will result in an error.
func ( m * Metadata ) Write ( ctx context . Context , updatePermissions bool ) ( * api . Item , error ) {
update := m . toAPIMetadata ( )
if update . IsEmpty ( ) {
return nil , fmt . Errorf ( "%v: no writeable metadata found: %v" , m . remote , m )
}
opts := m . fs . newOptsCallWithPath ( ctx , m . remote , "PATCH" , "" )
var info * api . Item
err := m . fs . pacer . Call ( func ( ) ( bool , error ) {
resp , err := m . fs . srv . CallJSON ( ctx , & opts , & update , & info )
return shouldRetry ( ctx , resp , err )
} )
if err != nil {
fs . Debugf ( m . remote , "errored metadata: %v" , m )
return nil , fmt . Errorf ( "%v: error updating metadata: %v" , m . remote , err )
}
if m . fs . opt . MetadataPermissions . IsSet ( rwWrite ) && updatePermissions {
m . normalizedID = info . GetID ( )
err = m . WritePermissions ( ctx )
if err != nil {
fs . Errorf ( m . remote , "error writing permissions: %v" , err )
return info , err
}
}
// update the struct since we have fresh info
m . fs . setSystemMetadata ( info , m , m . remote , m . mimeType )
return info , err
}
// RefreshPermissions fetches the current permissions from the remote and caches them as Metadata
func ( m * Metadata ) RefreshPermissions ( ctx context . Context ) ( err error ) {
if m . normalizedID == "" {
return errors . New ( "internal error: normalizedID is missing" )
}
p , _ , err := m . fs . getPermissions ( ctx , m . normalizedID )
if err != nil {
return fmt . Errorf ( "failed to refresh permissions: %w" , err )
}
m . permissions = p
return nil
}
// WritePermissions sets the permissions (and no other metadata) on the remote.
// m.permissions (the existing perms) and m.queuedPermissions (the new perms to be set) must be set correctly before calling this.
// m.permissions == nil will not error, as it is valid to add permissions when there were previously none.
// If successful, m.permissions will be set with the new current permissions and m.queuedPermissions will be nil.
func ( m * Metadata ) WritePermissions ( ctx context . Context ) ( err error ) {
if ! m . fs . opt . MetadataPermissions . IsSet ( rwWrite ) {
return errors . New ( "can't write permissions without --onedrive-metadata-permissions write" )
}
if m . normalizedID == "" {
return errors . New ( "internal error: normalizedID is missing" )
}
2024-05-14 13:27:03 +02:00
if m . fs . opt . MetadataPermissions . IsSet ( rwFailOK ) {
// If failok is set, allow the permissions setting to fail and only log an ERROR
defer func ( ) {
if err != nil {
fs . Errorf ( m . fs , "Ignoring error as failok is set: %v" , err )
err = nil
}
} ( )
}
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
// compare current to queued and sort into add/update/remove queues
add , update , remove := m . sortPermissions ( )
fs . Debugf ( m . remote , "metadata permissions: to add: %d to update: %d to remove: %d" , len ( add ) , len ( update ) , len ( remove ) )
_ , err = m . processPermissions ( ctx , add , update , remove )
if err != nil {
return fmt . Errorf ( "failed to process permissions: %w" , err )
}
err = m . RefreshPermissions ( ctx )
fs . Debugf ( m . remote , "updated permissions (now has %d permissions)" , len ( m . permissions ) )
if err != nil {
return fmt . Errorf ( "failed to get permissions: %w" , err )
}
m . queuedPermissions = nil
return nil
}
// sortPermissions sorts the permissions (to be written) into add, update, and remove queues
func ( m * Metadata ) sortPermissions ( ) ( add , update , remove [ ] * api . PermissionsType ) {
new , old := m . queuedPermissions , m . permissions
if len ( old ) == 0 || m . permsAddOnly {
return new , nil , nil // they must all be "add"
}
for _ , n := range new {
if n == nil {
continue
}
if n . ID != "" {
// sanity check: ensure there's a matching "old" id with a non-matching role
if ! slices . ContainsFunc ( old , func ( o * api . PermissionsType ) bool {
2024-04-22 02:40:04 +02:00
return o . ID == n . ID && slices . Compare ( o . Roles , n . Roles ) != 0 && len ( o . Roles ) > 0 && len ( n . Roles ) > 0 && ! slices . Contains ( o . Roles , api . OwnerRole )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
} ) {
fs . Debugf ( m . remote , "skipping update for invalid roles: %v (perm ID: %v)" , n . Roles , n . ID )
continue
}
if m . fs . driveType != driveTypePersonal && n . Link != nil && n . Link . WebURL != "" {
// special case to work around API limitation -- can't update a sharing link perm so need to remove + add instead
// https://learn.microsoft.com/en-us/answers/questions/986279/why-is-update-permission-graph-api-for-files-not-w
// https://github.com/microsoftgraph/msgraph-sdk-dotnet/issues/1135
fs . Debugf ( m . remote , "sortPermissions: can't update due to API limitation, will remove + add instead: %v" , n . Roles )
remove = append ( remove , n )
add = append ( add , n )
continue
}
fs . Debugf ( m . remote , "sortPermissions: will update role to %v" , n . Roles )
update = append ( update , n )
} else {
fs . Debugf ( m . remote , "sortPermissions: will add permission: %v %v" , n , n . Roles )
add = append ( add , n )
}
}
for _ , o := range old {
2024-04-22 02:40:04 +02:00
if slices . Contains ( o . Roles , api . OwnerRole ) {
fs . Debugf ( m . remote , "skipping remove permission -- can't remove 'owner' role" )
continue
}
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
newHasOld := slices . ContainsFunc ( new , func ( n * api . PermissionsType ) bool {
if n == nil || n . ID == "" {
return false // can't remove perms without an ID
}
return n . ID == o . ID
} )
if ! newHasOld && o . ID != "" && ! slices . Contains ( add , o ) && ! slices . Contains ( update , o ) {
fs . Debugf ( m . remote , "sortPermissions: will remove permission: %v %v (perm ID: %v)" , o , o . Roles , o . ID )
remove = append ( remove , o )
}
}
return add , update , remove
}
// processPermissions executes the add, update, and remove queues for writing permissions
func ( m * Metadata ) processPermissions ( ctx context . Context , add , update , remove [ ] * api . PermissionsType ) ( newPermissions [ ] * api . PermissionsType , err error ) {
2024-04-11 14:51:38 +02:00
errs := errcount . New ( )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
for _ , p := range remove { // remove (need to do these first because of remove + add workaround)
_ , err := m . removePermission ( ctx , p )
if err != nil {
2024-04-11 14:51:38 +02:00
fs . Errorf ( m . remote , "Failed to remove permission: %v" , err )
errs . Add ( err )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
}
for _ , p := range add { // add
newPs , _ , err := m . addPermission ( ctx , p )
if err != nil {
2024-04-11 14:51:38 +02:00
fs . Errorf ( m . remote , "Failed to add permission: %v" , err )
errs . Add ( err )
continue
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
newPermissions = append ( newPermissions , newPs ... )
}
for _ , p := range update { // update
newP , _ , err := m . updatePermission ( ctx , p )
if err != nil {
2024-04-11 14:51:38 +02:00
fs . Errorf ( m . remote , "Failed to update permission: %v" , err )
errs . Add ( err )
continue
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
newPermissions = append ( newPermissions , newP )
}
2024-04-15 22:17:22 +02:00
err = errs . Err ( "failed to set permissions" )
if err != nil {
err = fserrors . NoRetryError ( err )
}
return newPermissions , err
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
// fillRecipients looks for recipients to add from the permission passed in.
2024-04-30 14:50:11 +02:00
// It looks for an email address in identity.User.Email, ID, and DisplayName, otherwise it uses the identity.User.ID as r.ObjectID.
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
// It considers both "GrantedTo" and "GrantedToIdentities".
2024-04-22 03:39:15 +02:00
func fillRecipients ( p * api . PermissionsType , driveType string ) ( recipients [ ] api . DriveRecipient ) {
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
if p == nil {
return recipients
}
2024-04-22 03:39:15 +02:00
ids := make ( map [ string ] struct { } , len ( p . GetGrantedToIdentities ( driveType ) ) + 1 )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
isUnique := func ( s string ) bool {
_ , ok := ids [ s ]
return ! ok && s != ""
}
addRecipient := func ( identity * api . IdentitySet ) {
r := api . DriveRecipient { }
id := ""
2024-04-30 14:50:11 +02:00
if strings . ContainsRune ( identity . User . Email , '@' ) {
id = identity . User . Email
r . Email = id
} else if strings . ContainsRune ( identity . User . ID , '@' ) {
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
id = identity . User . ID
r . Email = id
} else if strings . ContainsRune ( identity . User . DisplayName , '@' ) {
id = identity . User . DisplayName
r . Email = id
} else {
id = identity . User . ID
r . ObjectID = id
}
if ! isUnique ( id ) {
return
}
ids [ id ] = struct { } { }
recipients = append ( recipients , r )
}
2024-04-30 14:50:11 +02:00
forIdentitySet := func ( iSet * api . IdentitySet ) {
if iSet == nil {
return
}
iS := * iSet
forIdentity := func ( i api . Identity ) {
if i != ( api . Identity { } ) {
iS . User = i
addRecipient ( & iS )
}
}
forIdentity ( iS . User )
forIdentity ( iS . SiteUser )
forIdentity ( iS . Group )
forIdentity ( iS . SiteGroup )
forIdentity ( iS . Application )
forIdentity ( iS . Device )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
2024-04-30 14:50:11 +02:00
for _ , identitySet := range p . GetGrantedToIdentities ( driveType ) {
forIdentitySet ( identitySet )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
2024-04-30 14:50:11 +02:00
forIdentitySet ( p . GetGrantedTo ( driveType ) )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
return recipients
}
// addPermission adds new permissions to an object or dir.
// if p.Link.Scope == "anonymous" then it will also create a Public Link.
func ( m * Metadata ) addPermission ( ctx context . Context , p * api . PermissionsType ) ( newPs [ ] * api . PermissionsType , resp * http . Response , err error ) {
opts := m . fs . newOptsCall ( m . normalizedID , "POST" , "/invite" )
req := & api . AddPermissionsRequest {
2024-04-22 03:39:15 +02:00
Recipients : fillRecipients ( p , m . fs . driveType ) ,
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
RequireSignIn : m . fs . driveType != driveTypePersonal , // personal and business have conflicting requirements
Roles : p . Roles ,
}
if m . fs . driveType != driveTypePersonal {
req . RetainInheritedPermissions = false // not supported for personal
}
if p . Link != nil && p . Link . Scope == api . AnonymousScope {
link , err := m . fs . PublicLink ( ctx , m . remote , fs . DurationOff , false )
if err != nil {
return nil , nil , err
}
p . Link . WebURL = link
newPs = append ( newPs , p )
if len ( req . Recipients ) == 0 {
return newPs , nil , nil
}
}
if len ( req . Recipients ) == 0 {
fs . Debugf ( m . remote , "skipping add permission -- at least one valid recipient is required" )
return nil , nil , nil
}
if len ( req . Roles ) == 0 {
return nil , nil , errors . New ( "at least one role is required to add a permission (choices: read, write, owner, member)" )
}
if slices . Contains ( req . Roles , api . OwnerRole ) {
fs . Debugf ( m . remote , "skipping add permission -- can't invite a user with 'owner' role" )
return nil , nil , nil
}
newP := & api . PermissionsResponse { }
err = m . fs . pacer . Call ( func ( ) ( bool , error ) {
resp , err = m . fs . srv . CallJSON ( ctx , & opts , & req , & newP )
return shouldRetry ( ctx , resp , err )
} )
return newP . Value , resp , err
}
// updatePermission updates an existing permission on an object or dir.
// This requires the permission ID and a role to update (which will error if it is the same as the existing role.)
// Role is the only property that can be updated.
func ( m * Metadata ) updatePermission ( ctx context . Context , p * api . PermissionsType ) ( newP * api . PermissionsType , resp * http . Response , err error ) {
opts := m . fs . newOptsCall ( m . normalizedID , "PATCH" , "/permissions/" + p . ID )
req := api . UpdatePermissionsRequest { Roles : p . Roles } // roles is the only property that can be updated
if len ( req . Roles ) == 0 {
return nil , nil , errors . New ( "at least one role is required to update a permission (choices: read, write, owner, member)" )
}
newP = & api . PermissionsType { }
err = m . fs . pacer . Call ( func ( ) ( bool , error ) {
resp , err = m . fs . srv . CallJSON ( ctx , & opts , & req , & newP )
return shouldRetry ( ctx , resp , err )
} )
return newP , resp , err
}
// removePermission removes an existing permission on an object or dir.
// This requires the permission ID.
func ( m * Metadata ) removePermission ( ctx context . Context , p * api . PermissionsType ) ( resp * http . Response , err error ) {
opts := m . fs . newOptsCall ( m . normalizedID , "DELETE" , "/permissions/" + p . ID )
opts . NoResponse = true
err = m . fs . pacer . Call ( func ( ) ( bool , error ) {
resp , err = m . fs . srv . CallJSON ( ctx , & opts , nil , nil )
return shouldRetry ( ctx , resp , err )
} )
return resp , err
}
// getPermissions gets the current permissions for an object or dir, from the API.
func ( f * Fs ) getPermissions ( ctx context . Context , normalizedID string ) ( p [ ] * api . PermissionsType , resp * http . Response , err error ) {
opts := f . newOptsCall ( normalizedID , "GET" , "/permissions" )
permResp := & api . PermissionsResponse { }
err = f . pacer . Call ( func ( ) ( bool , error ) {
resp , err = f . srv . CallJSON ( ctx , & opts , nil , & permResp )
return shouldRetry ( ctx , resp , err )
} )
return permResp . Value , resp , err
}
func ( f * Fs ) newMetadata ( remote string ) * Metadata {
return & Metadata { fs : f , remote : remote }
}
// returns true if metadata includes a "permissions" key and f.opt.MetadataPermissions includes "write".
func ( f * Fs ) needsUpdatePermissions ( metadata fs . Metadata ) bool {
_ , ok := metadata [ "permissions" ]
return ok && f . opt . MetadataPermissions . IsSet ( rwWrite )
}
// returns a non-zero btime if we have one
// otherwise falls back to mtime
func ( o * Object ) tryGetBtime ( modTime time . Time ) time . Time {
if o . meta != nil && ! o . meta . btime . IsZero ( ) {
return o . meta . btime
}
return modTime
}
// adds metadata (except permissions) if --metadata is in use
2024-03-28 18:00:43 +01:00
func ( o * Object ) fetchMetadataForCreate ( ctx context . Context , src fs . ObjectInfo , options [ ] fs . OpenOption , modTime time . Time ) ( createRequest api . CreateUploadRequest , metadata fs . Metadata , err error ) {
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
createRequest = api . CreateUploadRequest { // we set mtime no matter what
Item : api . Metadata {
FileSystemInfo : & api . FileSystemInfoFacet {
CreatedDateTime : api . Timestamp ( o . tryGetBtime ( modTime ) ) ,
LastModifiedDateTime : api . Timestamp ( modTime ) ,
} ,
} ,
}
meta , err := fs . GetMetadataOptions ( ctx , o . fs , src , options )
if err != nil {
2024-03-28 18:00:43 +01:00
return createRequest , nil , fmt . Errorf ( "failed to read metadata from source object: %w" , err )
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
if meta == nil {
2024-03-28 18:00:43 +01:00
return createRequest , nil , nil // no metadata or --metadata not in use, so just return mtime
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
if o . meta == nil {
o . meta = o . fs . newMetadata ( o . Remote ( ) )
}
o . meta . mtime = modTime
numSet , err := o . meta . Set ( ctx , meta )
if err != nil {
2024-03-28 18:00:43 +01:00
return createRequest , meta , err
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
if numSet == 0 {
2024-03-28 18:00:43 +01:00
return createRequest , meta , nil
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
createRequest . Item = o . meta . toAPIMetadata ( )
2024-03-28 18:00:43 +01:00
return createRequest , meta , nil
onedrive: add metadata support
This change adds support for metadata on OneDrive. Metadata (including
permissions) is supported for both files and directories.
OneDrive supports System Metadata (not User Metadata, as of this writing.) Much
of the metadata is read-only, and there are some differences between OneDrive
Personal and Business (see table in OneDrive backend docs for details).
Permissions are also supported, if --onedrive-metadata-permissions is set. The
accepted values for --onedrive-metadata-permissions are read, write, read,write, and
off (the default). write supports adding new permissions, updating the "role" of
existing permissions, and removing permissions. Updating and removing require
the Permission ID to be known, so it is recommended to use read,write instead of
write if you wish to update/remove permissions.
Permissions are read/written in JSON format using the same schema as the
OneDrive API, which differs slightly between OneDrive Personal and Business.
(See OneDrive backend docs for examples.)
To write permissions, pass in a "permissions" metadata key using this same
format. The --metadata-mapper tool can be very helpful for this.
When adding permissions, an email address can be provided in the User.ID or
DisplayName properties of grantedTo or grantedToIdentities. Alternatively, an
ObjectID can be provided in User.ID. At least one valid recipient must be
provided in order to add a permission for a user. Creating a Public Link is also
supported, if Link.Scope is set to "anonymous".
Note that adding a permission can fail if a conflicting permission already
exists for the file/folder.
To update an existing permission, include both the Permission ID and the new
roles to be assigned. roles is the only property that can be changed.
To remove permissions, pass in a blob containing only the permissions you wish
to keep (which can be empty, to remove all.)
Note that both reading and writing permissions requires extra API calls, so if
you don't need to read or write permissions it is recommended to omit --onedrive-
metadata-permissions.
Metadata and permissions are supported for Folders (directories) as well as
Files. Note that setting the mtime or btime on a Folder requires one extra API
call on OneDrive Business only.
OneDrive does not currently support User Metadata. When writing metadata, only
writeable system properties will be written -- any read-only or unrecognized keys
passed in will be ignored.
TIP: to see the metadata and permissions for any file or folder, run:
rclone lsjson remote:path --stat -M --onedrive-metadata-permissions read
See the OneDrive backend docs for a table of all the supported metadata
properties.
2024-02-22 15:17:14 +01:00
}
// Fetch metadata and update updateInfo if --metadata is in use
// modtime will still be set when there is no metadata to set
func ( f * Fs ) fetchAndUpdateMetadata ( ctx context . Context , src fs . ObjectInfo , options [ ] fs . OpenOption , updateInfo * Object ) ( info * api . Item , err error ) {
meta , err := fs . GetMetadataOptions ( ctx , f , src , options )
if err != nil {
return nil , fmt . Errorf ( "failed to read metadata from source object: %w" , err )
}
if meta == nil {
return updateInfo . setModTime ( ctx , src . ModTime ( ctx ) ) // no metadata or --metadata not in use, so just set modtime
}
if updateInfo . meta == nil {
updateInfo . meta = f . newMetadata ( updateInfo . Remote ( ) )
}
newInfo , err := updateInfo . updateMetadata ( ctx , meta )
if newInfo == nil {
return info , err
}
return newInfo , err
}
// updateMetadata calls Get, Set, and Write
func ( o * Object ) updateMetadata ( ctx context . Context , meta fs . Metadata ) ( info * api . Item , err error ) {
_ , err = o . meta . Get ( ctx ) // refresh permissions
if err != nil {
return nil , err
}
numSet , err := o . meta . Set ( ctx , meta )
if err != nil {
return nil , err
}
if numSet == 0 {
return nil , nil
}
info , err = o . meta . Write ( ctx , o . fs . needsUpdatePermissions ( meta ) )
if err != nil {
return info , err
}
err = o . setMetaData ( info )
if err != nil {
return info , err
}
// Remove versions if required
if o . fs . opt . NoVersions {
err := o . deleteVersions ( ctx )
if err != nil {
return info , fmt . Errorf ( "%v: Failed to remove versions: %v" , o , err )
}
}
return info , nil
}
// MkdirMetadata makes the directory passed in as dir.
//
// It shouldn't return an error if it already exists.
//
// If the metadata is not nil it is set.
//
// It returns the directory that was created.
func ( f * Fs ) MkdirMetadata ( ctx context . Context , dir string , metadata fs . Metadata ) ( fs . Directory , error ) {
var info * api . Item
var meta * Metadata
dirID , err := f . dirCache . FindDir ( ctx , dir , false )
if err == fs . ErrorDirNotFound {
// Directory does not exist so create it
var leaf , parentID string
leaf , parentID , err = f . dirCache . FindPath ( ctx , dir , true )
if err != nil {
return nil , err
}
info , meta , err = f . createDir ( ctx , parentID , dir , leaf , metadata )
if err != nil {
return nil , err
}
if f . driveType != driveTypePersonal {
// for some reason, OneDrive Business needs this extra step to set modtime, while Personal does not. Seems like a bug...
fs . Debugf ( dir , "setting time %v" , meta . mtime )
info , err = meta . Write ( ctx , false )
}
} else if err == nil {
// Directory exists and needs updating
info , meta , err = f . updateDir ( ctx , dirID , dir , metadata )
}
if err != nil {
return nil , err
}
// Convert the info into a directory entry
parent , _ := dircache . SplitPath ( dir )
entry , err := f . itemToDirEntry ( ctx , parent , info )
if err != nil {
return nil , err
}
directory , ok := entry . ( * Directory )
if ! ok {
return nil , fmt . Errorf ( "internal error: expecting %T to be a *Directory" , entry )
}
directory . meta = meta
f . setSystemMetadata ( info , directory . meta , entry . Remote ( ) , dirMimeType )
dirEntry , ok := entry . ( fs . Directory )
if ! ok {
return nil , fmt . Errorf ( "internal error: expecting %T to be an fs.Directory" , entry )
}
return dirEntry , nil
}
// createDir makes a directory with pathID as parent and name leaf with optional metadata
func ( f * Fs ) createDir ( ctx context . Context , pathID , dirWithLeaf , leaf string , metadata fs . Metadata ) ( info * api . Item , meta * Metadata , err error ) {
// fs.Debugf(f, "CreateDir(%q, %q)\n", dirID, leaf)
var resp * http . Response
opts := f . newOptsCall ( pathID , "POST" , "/children" )
mkdir := api . CreateItemWithMetadataRequest {
CreateItemRequest : api . CreateItemRequest {
Name : f . opt . Enc . FromStandardName ( leaf ) ,
ConflictBehavior : "fail" ,
} ,
}
m := f . newMetadata ( dirWithLeaf )
m . mimeType = dirMimeType
numSet := 0
if len ( metadata ) > 0 {
numSet , err = m . Set ( ctx , metadata )
if err != nil {
return nil , m , err
}
if numSet > 0 {
mkdir . Metadata = m . toAPIMetadata ( )
}
}
err = f . pacer . Call ( func ( ) ( bool , error ) {
resp , err = f . srv . CallJSON ( ctx , & opts , & mkdir , & info )
return shouldRetry ( ctx , resp , err )
} )
if err != nil {
return nil , m , err
}
if f . needsUpdatePermissions ( metadata ) && numSet > 0 { // permissions must be done as a separate step
m . normalizedID = info . GetID ( )
err = m . RefreshPermissions ( ctx )
if err != nil {
return info , m , err
}
err = m . WritePermissions ( ctx )
if err != nil {
fs . Errorf ( m . remote , "error writing permissions: %v" , err )
return info , m , err
}
}
return info , m , nil
}
// updateDir updates an existing a directory with the metadata passed in
func ( f * Fs ) updateDir ( ctx context . Context , dirID , remote string , metadata fs . Metadata ) ( info * api . Item , meta * Metadata , err error ) {
d := f . newDir ( dirID , remote )
_ , err = d . meta . Set ( ctx , metadata )
if err != nil {
return nil , nil , err
}
info , err = d . meta . Write ( ctx , f . needsUpdatePermissions ( metadata ) )
return info , d . meta , err
}
func ( f * Fs ) newDir ( dirID , remote string ) ( d * Directory ) {
d = & Directory {
fs : f ,
remote : remote ,
size : - 1 ,
items : - 1 ,
id : dirID ,
meta : f . newMetadata ( remote ) ,
}
d . meta . normalizedID = dirID
return d
}
// Metadata returns metadata for a DirEntry
//
// It should return nil if there is no Metadata
func ( o * Object ) Metadata ( ctx context . Context ) ( metadata fs . Metadata , err error ) {
err = o . readMetaData ( ctx )
if err != nil {
fs . Logf ( o , "Failed to read metadata: %v" , err )
return nil , err
}
return o . meta . Get ( ctx )
}
// DirSetModTime sets the directory modtime for dir
func ( f * Fs ) DirSetModTime ( ctx context . Context , dir string , modTime time . Time ) error {
dirID , err := f . dirCache . FindDir ( ctx , dir , false )
if err != nil {
return err
}
d := f . newDir ( dirID , dir )
return d . SetModTime ( ctx , modTime )
}
// SetModTime sets the metadata on the DirEntry to set the modification date
//
// If there is any other metadata it does not overwrite it.
func ( d * Directory ) SetModTime ( ctx context . Context , t time . Time ) error {
btime := t
if d . meta != nil && ! d . meta . btime . IsZero ( ) {
btime = d . meta . btime // if we already have a non-zero btime, preserve it
}
d . meta = d . fs . newMetadata ( d . remote ) // set only the mtime and btime
d . meta . mtime = t
d . meta . btime = btime
_ , err := d . meta . Write ( ctx , false )
return err
}
// Metadata returns metadata for a DirEntry
//
// It should return nil if there is no Metadata
func ( d * Directory ) Metadata ( ctx context . Context ) ( metadata fs . Metadata , err error ) {
return d . meta . Get ( ctx )
}
// SetMetadata sets metadata for a Directory
//
// It should return fs.ErrorNotImplemented if it can't set metadata
func ( d * Directory ) SetMetadata ( ctx context . Context , metadata fs . Metadata ) error {
_ , meta , err := d . fs . updateDir ( ctx , d . id , d . remote , metadata )
d . meta = meta
return err
}
// Fs returns read only access to the Fs that this object is part of
func ( d * Directory ) Fs ( ) fs . Info {
return d . fs
}
// String returns the name
func ( d * Directory ) String ( ) string {
return d . remote
}
// Remote returns the remote path
func ( d * Directory ) Remote ( ) string {
return d . remote
}
// ModTime returns the modification date of the file
//
// If one isn't available it returns the configured --default-dir-time
func ( d * Directory ) ModTime ( ctx context . Context ) time . Time {
if ! d . meta . mtime . IsZero ( ) {
return d . meta . mtime
}
ci := fs . GetConfig ( ctx )
return time . Time ( ci . DefaultTime )
}
// Size returns the size of the file
func ( d * Directory ) Size ( ) int64 {
return d . size
}
// Items returns the count of items in this directory or this
// directory and subdirectories if known, -1 for unknown
func ( d * Directory ) Items ( ) int64 {
return d . items
}
// ID gets the optional ID
func ( d * Directory ) ID ( ) string {
return d . id
}
// MimeType returns the content type of the Object if
// known, or "" if not
func ( d * Directory ) MimeType ( ctx context . Context ) string {
return dirMimeType
}