Before this change the local backend was returning file not found
errors for post transfer hashes for files which were moved. This was
caused by the routine which checks for the object being changed.
After this change we ignore file not found errors while checking to
see if the object has changed. If the hash has to be computed then a
file not found error will be thrown when it is opened, otherwise the
cached hash will be returned.
Before this change rclone would skip all shortcuts with a message
Ignoring unknown document type "application/vnd.google-apps.shortcut"
After this message rclone resolves the shortcuts by default to the
actual files that they point to. See the docs for more info.
The --drive-skip-shortcuts flag can be used to skip shortcuts.
Before this change the newObject* functions could return object=nil
with err=nil. The result of these functions are passed outside of the
backend code (eg in Copy, Move) and returning a nil object with a nil
error leads to crashes elsewhere as it breaks expectations.
After this change we return (nil, fs.ErrorObjectNotFound) in these
cases. The one place this is actually needd internally (when turning
items into listings) we detect that error and use it to mean skip the
directory item.
This problem was noticed while testing the shortcuts code. It
shouldn't happen normally but it is conceivable it could.
Apparently some tools (eg duplicati) upload the SHA1 in uppercase to
b2 to be stored in the `large_file_sha1` metadata. This patch forces
it to lower case.
According to Microsoft support this error can be caused by
> A timing/concurrency issue where the PUT operations are happening
> about the same time for a single blob. The Put Block List operation
> writes a blob by specifying the list of block IDs that make up the
> blob. In order to be written as part of a blob, a block must have
> been successfully written to the server in a prior Put Block
> operation.
>
> Documentation reference:
>
> https://docs.microsoft.com/en-us/rest/api/storageservices/put-block
>
> This error can happen when doing concurrent upload commits after you
> have started the upload but before you commit. In that case, the
> upload fails. The application can retry this error or attempt some
> other recovery action based on the required scenario.
See: https://forum.rclone.org/t/error-while-syncing-with-azure-blob-storage-x-ms-error-code-invalidbloborblock/15561
For a certain class of broken or missing image Google Photos puts an
image in the error message.
Before this fix we blindly chucked it into the error message.
After this fix we replace it with some sensible text.
Before this change crypt would not calculate hashes for files it was
uploading. This is because, in the general case, they have to be
downloaded, encrypted and hashed which is too resource intensive.
However this causes backends which need the hash first before
uploading (eg s3/b2 when uploading chunked files) not to have a hash
of the file. This causes cryptcheck to complain about missing hashes
on large files uploaded via s3/b2.
This change calculates hashes for the upload if the upload is coming
from a local filesystem. It does this by encrypting and hashing the
local file re-using the code used by cryptcheck. For a local disk this
is not a lot more intensive than calculating the hash.
See: https://forum.rclone.org/t/strange-output-for-cryptcheck/15437Fixes: #2809
Previously we had a map of pools for different chunk sizes.
In practice the mapping is not very useful and requires a lock.
Pools of size other that ChunkSize can only happen when we have a huge file (over 10k * ChunkSize).
We need to have a bunch of identically sized huge files.
In such case most likely ChunkSize should be increased.
The mapping and its lock is replaced with a single initialised pool for ChunkSize, in other cases pool is allocated and freed on per file basis.
Rclone can't safely delete files with multiple parents without
PATCHing the parents list. This can be done, but since multiple
parents are going away to be replaced by drive shortcuts we return an
error for now.
See #4013
Before this change we queries /me/drives for a list of the users
drives and asked the user to choose. Sometimes this does not return
the users main drive for reasons unknown.
After this change we query /me/drives first then /me/drive and add
that to the list of drives if it wasn't already there.
In 5470d34740 "backend/s3: use low-level-retries as the number
of SDK retries" we switched over to using the AWS SDK low level
retries instead of rclone's low level retry logic.
This had the unfortunate attempt that retrying listings to correct XML
Syntax errors failed on non S3 backends such as CEPH. The AWS SDK was
also retrying the XML Syntax error request which doesn't make sense.
This change turns off the AWS SDK retries in favour of just using
rclone's retry logic.
If chunk size is more than 250M (262,144,000 bytes) then API throws the following error:
Microsoft.SharePoint.Client.InvalidClientQueryException: The request message is too big. The server does not allow messages larger than 262144000 bytes.
Before this change rclone didn't use sparse files on Windows. This
means that when you downloaded a file with multithread download it
wrote the entire file with zeros first on the first write not at the
start of the file.
This change makes the file be sparse on Windows. Linux/macOS files
were already sparse.
Before this change shared with me items with multiple parents (ie most
of them that aren't in the root) would appear twice in the directory
listings.
This fixes the problem by doing an early exit for shared with me
items.
This bug was introduced here by removing some necessary code detecting
shared with me items at the root with no parents.
4453fa4ba6 "drive: fix --fast-list when using appDataFolder"
This fix reverts that part of the patch.
Fixes#4018
This adds a bit of missed locking around the uploaded info to fix the
concurrent map write.
All the other accesses have locking - this one must have got missed.
pureftpd has a bug where it sends messages like this
```
150-Accepted data connection\r\n
Response code: File status okay; about to open data connection (150)
Response arg: Accepted data connection
150 32768.0 kbytes to download\r\n
150 0.014 seconds (measured here), 1665.27 Mbytes per second\r\n
```
The last `150` is treated as a new response - the previous `150` should have been `150-`.
This means that rclone sees the `150 0.014 seconds (measured here),
1665.27 Mbytes per second` as a reply to the next message and reports
it as an error.
This fix ignores that specific message when it is received in the
`Close` method. It dumps the FTP connection after as it is out of
sync.
See: #3984Fixes#3445
Before this change if rclone failed to close a file download for some
reason it would leak a concurrency token. When all the tokens were
leaked then rclone would lock up.
This fix returns the concurrency token regardless of the error status.
Before this change if rclone failed to upload a file for some reason
it would leak a concurrency token. When all the tokens were leaked
then rclone would lock up.
The fix returns the concurrency token regardless of the error state.
Before this change if rclone failed to make an FTP connection for some
reason it would leak a concurrency token. When all the tokens were
leaked then rclone would lock up.
The fix returns the concurrency token if creating the FTP connection
returns an error.
Amazon S3 is built to handle different kinds of workloads.
In rare cases where S3 is not able to scale for whatever reason users
will face status 500 errors.
Main mechanism for handling these errors are retries.
Amount of needed retries varies for each different use case.
This change is making retries for s3 backend configurable by using
--low-level-retries option.
Currently each multipart upload allocated his own buffers, which after
file upload was garbaged. Next files couldn't leverage already allocated
memory which resulted in inefficent memory management. This change
introduces backend memory pool keeping memory chunks which can be
used during object operations.
Fixes#3967
The error code 500 Internal Error indicates that Amazon S3 is unable to handle the request at that time. The error code 503 Slow Down typically indicates that the requests to the S3 bucket are very high, exceeding the request rates described in Request Rate and Performance Guidelines.
Because Amazon S3 is a distributed service, a very small percentage of 5xx errors are expected during normal use of the service. All requests that return 5xx errors from Amazon S3 can and should be retried, so we recommend that applications making requests to Amazon S3 have a fault-tolerance mechanism to recover from these errors.
https://aws.amazon.com/premiumsupport/knowledge-center/http-5xx-errors-s3/
This removes the unused functions run.writeRemoteRandomBytes() run.writeObjectRandomBytes() run.listPath() Directory.parentRemote() and Persistent.dumpRoot().
Before this change, when uploading multipart files, onedrive would
sometimes return an unexpected 416 error and rclone would abort the
transfer.
This is usually after a 500 error which caused rclone to do a retry.
This change checks the upload position on a 416 error and works how
much of the current chunk to skip, then retries (or skips) the current
chunk as appropriate.
If the position is before the current chunk or after the current chunk
then rclone will abort the transfer.
See: https://forum.rclone.org/t/fragment-overlap-error-with-encrypted-onedrive/14001Fixes#3131
This hides:
- "use_created_date"
- "use_shared_date"
- "size_as_quota"
from the configurator (rclone config) as they interfere with normal
operations and shouldn't be set in a backend config.
They can still be put in the config file by hand and will still work
as variables, etc.
This adds some more docs to "size_as_quota" also.
Fixes#3912
Before this change we used non multipart uploads for files of unknown
size (streaming and uploads in mount). This is slower and less
reliable and is not recommended by Google for files smaller than 5MB.
After this change we use multipart resumable uploads for all files of
unknown length. This will use an extra transaction so is less
efficient for files under the chunk size, however the natural
buffering in the operations.Rcat call specified by
`--streaming-upload-cutoff` will overcome this.
See: https://forum.rclone.org/t/upload-behaviour-and-speed-when-using-vfs-cache/9920/
This error started happening after updating golang/x/crypto which was
done as a side effect of:
3801b8109 vendor: update termbox-go to fix ncdu command on FreeBSD
This turned out to be a deliberate policy of making
ssh.ParsePrivateKeyWithPassphrase fail if the passphrase was empty.
See: https://go-review.googlesource.com/c/crypto/+/207599
This fix calls ssh.ParsePrivateKey if the passphrase is empty and
ssh.ParsePrivateKeyWithPassphrase otherwise which fixes the problem.
If the --drive-stop-on-upload-limit flag is in effect this checks the
error string from Google Drive to see if it is the error you get when
you've breached your 750GB a day limit.
If so then it turns this error into a Fatal error which should stop
the sync.
Fixes#3857
In listings if the ID `appDataFolder` is used to list a directory the
parents of the items returned have the actual ID instead the alias
`appDataFolder`. This confused the ListR routine into ignoring all
these items.
This change makes the listing routine accept all parent IDs returned
if there was only one ID in the query. This fixes the `appDataFolder`
problem. This means we are relying on Google Drive to only return the
items we asked for which is probably OK.
Fixes#3851
The S3 ListObject API returns paginated bucket listings, with
"MaxKeys" items for each GET call.
The default value is 1000 entries, but for buckets with millions of
objects it might make sense to request more elements per request, if
the backend supports it. This commit adds a "list_chunk" option for
the user to specify a lower or higher value.
This commit does not add safe guards around this value - if a user
decides to request a too large list, it might result in connection
timeouts (on the server or client).
In AWS S3, there is a fixed limit of 1000, some other services might
have one too. In Ceph, this can be configured in RadosGW.
Before this patch we were failing to URL decode the NextMarker when
url encoding was used for the listing.
The result of this was duplicated listings entries for directories
with >1000 entries where the NextMarker was a file containing a space.
Before this change we used the same (relatively low limits) for server
side copy as we did for multipart uploads. It doesn't make sense to
use the same limits since no data is being downloaded or uploaded for
a server side copy.
This change introduces a new parameter --s3-copy-cutoff to control
when the switch from single to multipart server size copy happens and
defaults it to the maximum 5GB.
This makes server side copies much more efficient.
It also fixes the erroneous error when trying to set the modification
time of a file bigger than 5GB.
See #3778
Before this change multipart copies were giving the error
Range specified is not valid for source object of size
This was due to an off by one error in the range source introduced in
7b1274e29a "s3: support for multipart copy"
Before this change rclone used "Authorization: BEARER token". However
according the the RFC this should be "Bearer"
https://tools.ietf.org/html/rfc6750#section-2.1
This changes it to "Authorization: Bearer token"
Fixes#3751 and interop with Salesforce Webdav server
When using nextcloud, before this change we only uploaded one of SHA1
or MD5 checksum in the OC-Checksum header with preference to SHA1 if
both were set.
This makes the MD5 checksums read as empty string which makes syncing
with checksums less useful than they should be as all the MD5
checksums are blank.
This change makes it so that we only upload the SHA1 to nextcloud.
The behaviour of owncloud is unchanged as owncloud uses the checksum
as an upload integrity check only and calculates its own checksums.
See: https://forum.rclone.org/t/how-to-specify-hash-method-to-checksum/13055
This also corrects the symlink detection logic to only check symlink
files. Previous to this it was checking all directories too which was
making it do more stat calls than was necessary.
Before this change we forgot to URL decode the X-Object-Manifest in a dynamic large object.
This problem was introduced by 2fe8285f89 "swift: reserve
segments of dynamic large object when delete objects in container what
was enabled versioning."
For few commands, RClone counts a error multiple times. This was fixed by
creating a new error type which keeps a flag to remember if the error has
already been counted or not. The CountError function now wraps the original
error eith the above new error type and returns it.
Before this change rclone used the team_drive ID as the root if set
even if the root_folder_id was set too.
This change uses the root_folder_id in preference over the team_drive
which restores the functionality.
This problem was introduced by ba7c2ac443Fixes#3742
