Before this change, rclone would always check the root to see if it
was an object.
This change doesn't check to see if the root is an object if the path
ends with a /
This avoids a transaction where rclone HEADs the path to see if it
exists.
See #4990
Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M.
Extends binary suffix output with letter i, e.g. Ki and Mi.
Centralizes creation of bit/byte unit strings.
This code removes the code added in
15d19131bd s3: use aws web identity role provider
This code no longer works because it doesn't initialise the
tokenFetcher - leading to a nil pointer crash.
The proper way to initialise this is with the
NewWebIdentityCredentials but it isn't clear where to get the other
parameters: roleARN, roleSessionName, path.
In the linked issue a user reports rclone working with EKS anyway, so
perhaps this code is no longer needed.
If it is needed, hopefully someone who knows AWS better will come
along and fix it!
See: https://forum.rclone.org/t/add-support-for-aws-sso/23569
In this commit
fc5b14b620 s3: Added `--s3-disable-http2` to disable http/2
We created our own transport so we could disable http/2. However the
added function is called twice meaning that we create two HTTP
transports. This didn't happen with the original code because the
default transport is cached by fshttp.
Rclone normally does a PUT followed by a HEAD request to check an
upload has been successful.
With the two transports, the PUT and the HEAD were being done on
different HTTP transports. This means that it wasn't re-using the same
HTTP connection, so the HEAD request showed the previous object value.
This caused rclone to declare the upload was corrupted, delete the
object and try again.
This patch makes sure we only create one transport and use it for both
PUT and HEAD requests which fixes the problem with Wasabi.
See: https://forum.rclone.org/t/each-time-rclone-is-run-1-3-fails-2-3-succeeds/22545
Before this change, if folder level access permissions policy was in
use, with trailing `/` marking the folders then rclone would HEAD the
path without a trailing `/` to work out if it was a file or a folder.
This returned a permission denied error, which rclone returned to the
user.
Failed to create file system for "s3:bucket/path/": Forbidden: Forbidden
status code: 403, request id: XXXX, host id:
Previous to this change
53aa03cc44 s3: complete sse-c implementation
rclone would assume any errors when HEAD-ing the object implied it
didn't exist and this test would not fail.
This change reverts the functionality of the test to work as it did
before, meaning any errors on HEAD will make rclone assume the object
does not exist and the path is referring to a directory.
Fixes#4990
S3 backend shared_credentials_file option wasn't working neither from
config option nor from command line option. This was caused cause
shared_credentials_file_provider works as part of chain provider, but in
case user haven't specified access_token and access_key we had removed
(set nil) to credentials field, that may contain actual credentials got
from ChainProvider.
AWS_SHARED_CREDENTIALS_FILE env varible as far as i understood worked,
cause aws_sdk code handles it as one of default auth options, when
there's not configured credentials.
This is done by making fs.Config private and attaching it to the
context instead.
The Config should be obtained with fs.GetConfig and fs.AddConfig
should be used to get a new mutable config that can be changed.
Before this change, small objects uploaded with SSE-AWS/SSE-C would
not have MD5 sums.
This change adds metadata for these objects in the same way that the
metadata is stored for multipart uploaded objects.
See: #1824#2827
If rclone is configured for server side encryption - either aws:kms or
sse-c (but not sse-s3) then don't treat the ETags returned on objects
as MD5 hashes.
This fixes being able to upload small files.
Fixes#1824
This adds a context.Context parameter to NewFs and related calls.
This is necessary as part of reading config from the context -
backends need to be able to read the global config.
The maximum value for the --s3--copy-cutoff should be 5GiB as tested
with AWS S3.
However b2 have implemented this as 5GB rather than 5GiB so having the
default at 5 GiB makes the b2s3 server side copy of a large file by
default.
This patch sets the default to 4768 MiB which is slightly less than
5GB.
This should have very little effect on anything.
If in future rclone can lower this limit more if Copy can multithread.
See: https://forum.rclone.org/t/copying-files-within-a-b2-bucket/16680/76
Before this change the s3 multipart server side copy was not
preserving the metadata of the object. This was most noticeable
because the modtime was not preserved.
This change fetches the metadata from the object before starting the
copy and overwrites it if requires.
It will also mean any other metadata is preserved.
See: https://forum.rclone.org/t/copying-files-within-a-b2-bucket/16680/70
This reverts part of
151f03378f s3: fix upload of single files into buckets without create permission
This erroneously assumed that a HEAD request on a non existent object
would return "NotFound" if the bucket was found. In fact it returns
"NotFound" when the bucket isn't found also.
This will break the fix for #4297 - however that can be made to work
using the new --s3-assume-bucket-exists flag
This implements `rclone cleanup` to remove multipart uploads over 24
hours old. It also implements the backend command
`list-multipart-uploads` to see which ones are available and `cleanup`
to delete them with a configurable expiry interval.
See #4302
Previous to this fix if Region was not set and Endpoint was not set
then we set the endpoint to "https://s3.amazonaws.com/".
This is unecessary because if the Region alone isn't set then we set
it to "us-east-1" which has the same endpoint.
Having the endpoint set breaks the bucket region auto detection with
the error "Failed to update region for bucket: can't set region to
"xxx" as endpoint is set".
This fix removes that check.
Before this change we were setting the headers on the PUT
request for normal and multipart uploads. For normal uploads this caused the error
403 Forbidden: There were headers present in the request which were not signed
After this fix we set the headers in the object upload request itself
as the s3 SDK expects.
This means that we only support a limited range of headers
- Cache-Control
- Content-Disposition
- Content-Encoding
- Content-Language
- Content-Type
- X-Amz-Tagging
- X-Amz-Meta-
Note for the last of those are for setting custom metadata in the form
"X-Amz-Meta-Key: value".
This now works for multipart uploads and single part uploads
See also #59
* s3: add `max_upload_parts` support
This allows to configure a maximum amount of chunks used to upload file:
- Support Scaleway which has a limit of 1k chunks currently
- Reduce a cost on S3 when each request costs some money at the expense of memory used
Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>
Before this change, attempting to upload a single file into an s3
bucket which did not have create permission gave AccessDenied: Access
Denied error when it tried to create the bucket.
This was masked until e2bf91452a was
fixed.
This fix marks the bucket as OK if a fetch on an object indicates it
is OK. This stops rclone thinking it has to create the bucket in the
first place.
Fixes#4297
Previously we had a map of pools for different chunk sizes.
In practice the mapping is not very useful and requires a lock.
Pools of size other that ChunkSize can only happen when we have a huge file (over 10k * ChunkSize).
We need to have a bunch of identically sized huge files.
In such case most likely ChunkSize should be increased.
The mapping and its lock is replaced with a single initialised pool for ChunkSize, in other cases pool is allocated and freed on per file basis.
In 5470d34740 "backend/s3: use low-level-retries as the number
of SDK retries" we switched over to using the AWS SDK low level
retries instead of rclone's low level retry logic.
This had the unfortunate attempt that retrying listings to correct XML
Syntax errors failed on non S3 backends such as CEPH. The AWS SDK was
also retrying the XML Syntax error request which doesn't make sense.
This change turns off the AWS SDK retries in favour of just using
rclone's retry logic.
Amazon S3 is built to handle different kinds of workloads.
In rare cases where S3 is not able to scale for whatever reason users
will face status 500 errors.
Main mechanism for handling these errors are retries.
Amount of needed retries varies for each different use case.
This change is making retries for s3 backend configurable by using
--low-level-retries option.
Currently each multipart upload allocated his own buffers, which after
file upload was garbaged. Next files couldn't leverage already allocated
memory which resulted in inefficent memory management. This change
introduces backend memory pool keeping memory chunks which can be
used during object operations.
Fixes#3967
The error code 500 Internal Error indicates that Amazon S3 is unable to handle the request at that time. The error code 503 Slow Down typically indicates that the requests to the S3 bucket are very high, exceeding the request rates described in Request Rate and Performance Guidelines.
Because Amazon S3 is a distributed service, a very small percentage of 5xx errors are expected during normal use of the service. All requests that return 5xx errors from Amazon S3 can and should be retried, so we recommend that applications making requests to Amazon S3 have a fault-tolerance mechanism to recover from these errors.
https://aws.amazon.com/premiumsupport/knowledge-center/http-5xx-errors-s3/
The S3 ListObject API returns paginated bucket listings, with
"MaxKeys" items for each GET call.
The default value is 1000 entries, but for buckets with millions of
objects it might make sense to request more elements per request, if
the backend supports it. This commit adds a "list_chunk" option for
the user to specify a lower or higher value.
This commit does not add safe guards around this value - if a user
decides to request a too large list, it might result in connection
timeouts (on the server or client).
In AWS S3, there is a fixed limit of 1000, some other services might
have one too. In Ceph, this can be configured in RadosGW.
Before this patch we were failing to URL decode the NextMarker when
url encoding was used for the listing.
The result of this was duplicated listings entries for directories
with >1000 entries where the NextMarker was a file containing a space.
Before this change we used the same (relatively low limits) for server
side copy as we did for multipart uploads. It doesn't make sense to
use the same limits since no data is being downloaded or uploaded for
a server side copy.
This change introduces a new parameter --s3-copy-cutoff to control
when the switch from single to multipart server size copy happens and
defaults it to the maximum 5GB.
This makes server side copies much more efficient.
It also fixes the erroneous error when trying to set the modification
time of a file bigger than 5GB.
See #3778
Before this change multipart copies were giving the error
Range specified is not valid for source object of size
This was due to an off by one error in the range source introduced in
7b1274e29a "s3: support for multipart copy"
Before this change rclone would allow the user to stream (eg with
rclone mount, rclone rcat or uploading google photos or docs) 5TB
files. This meant that rclone allocated 4 * 525 MB buffers per
transfer which is way too much memory by default.
This change makes rclone use the configured chunk size for streamed
uploads. This is 5MB by default which means that rclone can stream
upload files up to 48GB by default staying below the 10,000 chunks
limit.
This can be increased with --s3-chunk-size if necessary.
If rclone detects that a file is being streamed to s3 it will make a
single NOTICE level log stating the limitation.
This fixes the enormous memory usage.
Fixes#3568
See: https://forum.rclone.org/t/how-much-memory-does-rclone-need/12743
This works around a bug in Ceph which doesn't encode CommonPrefixes
when using URL encoded directory listings.
See: https://tracker.ceph.com/issues/41870
When used with v2_auth = true, PresignRequest doesn't return
signed headers, so remote dest authentication would be fail.
This commit copying back HTTPRequest.Header to headers.
Tested with RiakCS v2.1.0.
Signed-off-by: Anthony Rusdi <33247310+antrusd@users.noreply.github.com>
