Running all the tests for 1fichier takes too long due to the directory
reading rate limiter.
The backend tests do complete in a reasonable time (21 mins).
This is what I wrote to Digital Ocean support on July 10, 2020 - alas
it didn't result in the rate limits dropping, so reluctantly I'm going
to remove DO from the integration tests since they never pass and have
no hope of ever passing while this rate limit is in effect.
----
Somewhere towards the end of June 2020 or the start of July 2020 my
integration tests between rclone ( https://rclone.org ) and Digital
Ocean started failing.
I tried moving the tests to different regions (currently they are
using AMS1 because I'm in Europe) with no improvement.
Rclone seems to be hitting this rate limit as documented here:
https://www.digitalocean.com/docs/spaces/#limits
- 2 COPYs per 5 minutes on any individual object in a Space
Rclone creates small objects about 100 bytes in size and renames them
a few times - this involves using the COPY call as S3 does not have a
rename API. The tests do this more than twice per object so hit the 5
minute timeout I think. Rclone does exponential backoff and fails
after 10 retries not having reached 5 minutes delay after 10 retries.
Having a 5 minute lockout on an S3 compatible API is surprising!
Rclone integration tests with about 30 other providers, none of which
have a rate limit like this.
I understand the need for a COPY rate limit as server side copying
large files can be resource intensive. However a 5 minute lockout for
copying 100 byte files seems excessive!
Might I humbly suggest that you reduce or eliminate this rate limit
for small files?
----
This was the reply
Unfortunately it is not possible to raise this limit or remove it
currently on our platform. I do see how this would interfere with type
of applications that need to copy many small files and will be happy
to take the feedback to our engineering team to see how we can improve
the spaces system in the future
- add a directory to the optional Purge interface
- fix up all the backends
- add an additional integration test to test for the feature
- use the new feature in operations.Purge
Many of the backends had been prepared in advance for this so the
change was trivial for them.
This adds expire and unlink fields to the PublicLink interface.
This fixes up the affected backends and removes unlink parameters
where they are present.
These commands are for implementing backend specific
functionality. They have documentation which is placed automatically
into the backend doc.
There is a simple test for the feature in the backend tests.
This has been reported to Wasabi and they've confirmed as a known
issue that multipart uploads can't be 0 sized even though that is
incompatible with AWS S3.
changes:
- chunker: remove GetTier and SetTier
- remove wdmrcompat metaformat
- remove fastopen strategy
- make hash_type option non-advanced
- adverise hash support when possible
- add metadata field "ver", run strict checks
- describe internal behavior in comments
- improve documentation
note:
wdmrcompat used to write file name in the metadata, so maximum metadata
size was 1K; removing it allows to cap size by 200 bytes now.
Note: chunker implements many irrelevant methods (UserInfo, Disconnect etc),
but they are required by TestIntegration/FsCheckWrap and cannot be removed.
Dropped API methods: MergeDirs DirCacheFlush PublicLink UserInfo Disconnect OpenWriterAt
Meta formats:
- renamed old simplejson format to wdmrcompat.
- new simplejson format supports hash sums and verification of chunk size/count.
Change list:
- split-chunking overlay for mailru
- add to all
- fix linter errors
- fix integration tests
- support chunks without meta object
- fix package paths
- propagate context
- fix formatting
- implement new required wrapper interfaces
- also test large file uploads
- simplify options
- user friendly name pattern
- set default chunk size 2G
- fix building with golang 1.9
- fix ci/cd on a separate branch
- fix updated object name (SyncUTFNorm failed)
- fix panic in Box overlay
- workaround: Box rename failed if name taken
- enhance comments in unit test
- fix formatting
- embed wrapped remote rather than inherit
- require wrapped remote to support move (or copy)
- implement 3 (keep fstest)
- drop irrelevant file system interfaces
- factor out Object.mainChunk
- refactor TestLargeUpload as InternalTest
- add unit test for chunk name formats
- new improved simplejson meta format
- tricky case in test FsIsFile (fix+ignore)
- remove debugging print
- hide temporary objects from listings
- fix bugs in chunking reader:
- return EOF immediately when all data is sent
- handle case when wrapped remote puts by hash (bug detected by TestRcat)
- chunked file hashing (feature)
- server-side copy across configs (feature)
- robust cleanup of temporary chunks in Put
- linear download strategy (no read-ahead, feature)
- fix unexpected EOF in the box multipart uploader
- throw error if destination ignores data
Before this change we didn't calculate any hashes for test files
created in the Run framework.
This means that files were uploaded to S3 without a `Content-MD5`
header. This in turn caused minio to disengage `--compat` mode which
in turn caused the `TestSyncAfterChangingModtimeOnlyWithNoUpdateModTime`
test to fail in `fs/sync`.
After this change we supply all hashes supported by the destination Fs
on the upload object.
This means that the `Content-MD5` is set and minio engages `--compat`
mode to fix the problem. Using `--compat` on the command line also
fixes the problem.
This much better replicates how objects are actually uploaded with
operations.Copy so should improve the integration tests.
Before this change it was possible to make a remote with an invalid
name in the config file, either manually or with `rclone config
create` (but not with `rclone config`).
When this remote was used, because it was invalid, rclone would
presume this remote name was a local directory for a very suprising
user experience!
This change checks remote names more carefully and returns errors
- when the user tries to use an invalid remote name on the command line
- when an invalid remote name is used in `rclone config create/update/password`
- when the user tries to enter an invalid remote name in `rclone config`
This does not prevent the user entering a remote name with invalid
characters in the config manually, but such a remote will fail
immediately when it is used on the command line.
The fs cache makes test runs no longer independent and this can cause
a problem with some tests.
Clearing the fs cache between tests runs fixes the problem.
This was spotted by @cenkalti as part of merging #3469
This was factored from fstest as we were including the testing
enviroment into the main binary because of it.
This was causing opening the browser to fail because of 8243ff8bc8.
Introduce stats groups that will isolate accounting for logically
different transferring operations. That way multiple accounting
operations can be done in parallel without interfering with each other
stats.
Using groups is optional. There is dedicated global stats that will be
used by default if no group is specified. This is operating mode for CLI
usage which is just fire and forget operation.
For running rclone as rc http server each request will create it's own
group. Also there is an option to specify your own group.
This was started by Fionera, finished off by Laura with fixes and more
docs from Nick.
Co-authored-by: Fionera <fionera@fionera.de>
Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>
- Change rclone/fs interfaces to accept context.Context
- Update interface implementations to use context.Context
- Change top level usage to propagate context to lover level functions
Context propagation is needed for stopping transfers and passing other
request-scoped values.
It otherwise has the nearly the same interface as walk.Walk which it
will fall back to if it can't use ListR.
Using walk.ListR will speed up file system operations by default and
use much less memory and start immediately compared to if --fast-list
had been supplied.
Before this change backend integration tests depended on each other,
so tests could not be retried.
After this change we nest tests to ensure that tests are provided with
the starting state they expect.
Tell the integration test runner that it can retry backend tests also.
This also includes bin/test_independence.go which runs each test
individually for a backend to prove that they are independent.
Before this change TestPurge would remove a container and subsequent
tests would fail because the container was still being deleted so
couldn't be created.
This was fixed by introducing an fstest.NewRunIndividual() test runner
for TestPurge which causes the test to be run on a new container.
- Make integration tests use a config file
- Output individual logs for each test
- Make HTML report and open browser
- Optionally email and upload results
Sometimes pcloud will leave a half uploaded file when the transfer
actually failed. This patch deletes the file if it exists.
This problem was spotted by the integration tests.
This change to go1.11 causes the TestFsPutError test to fail
https://go-review.googlesource.com/c/go/+/114316
This is because it now passes the half written file to the backend
whereas it didn't previously because of the buffering.
In this commit the size of the data written was increased to 5k from
50 bytes to provoke the test failure under go1.10 also.
* Fix errcheck and golint warnings
* Remove unused constants and fix comments
* Parse error responses properly
* Fix Open with RangeOption
* Fix Move, Copy and DirMove
* Implement DirCacheFlush
* Check interfaces are correct
* Remove debugs and update overview
* Correct feature flags
* Pare replacement characters down to the minimum set
* Add to the integration tests
Google cloud storage doesn't normally need retries, however certain
things (eg bucket creation and removal) are rate limited and do
generate 429 errors.
Before this change the integration tests would regularly blow up with
errors from GCS rate limiting bucket creation and removal.
After this change we low level retry all operations using the same
exponential backoff strategy as used in the google drive backend.
- make Close permanent and return errors afterwards
- use RangeSeek from the wrapped reader if present
- add a limit to chunk growth
- correct RangeSeek interface behavior
- add tests
List or ListR of an non existent directory must return
ErrorDirNotFound for non bucket based remotes. For bucket based
remotes it may return ErrorDirNotFound or it may return no error and
no entries.
* Implement about for:
* local, crypt, cache, drive, swift, hubic, onedrive, pcloud, dropbox
* Implement `--json` and `---full` flag for `rclone about`
* change About interface to return a Usage structure
* Remove operations.About as it is too thin an interface
* Implement Integration test
Relates to #1138 and #1564
This bug was introduced by the v3 API conversion in 07f20dd1fd.
The problem was that dircache.FindPath doesn't work for the root directory.
This adds an internal error for dircache.FindPath being called with
the root directory. This makes a failing test, which the fix to the
drive backend fixes.
This also improves the DirCache integration test.
Previous to this fix old notifications could creep in and cause the
test to fail. It also left files around which upset the TestObjectRemove test.
Fixes#2177
The purpose of this is to make it easier to maintain and eventually to
allow the rclone backends to be re-used in other projects without
having to use the rclone configuration system.
The new code layout is documented in CONTRIBUTING.
Now --dump-flag is written as --dump flag. This is a comma separated list which can contain
* headers - HTTP headers as before
* bodies - HTTP bodies as before
* requests - HTTP request bodies
* responses - HTTP response bodies
* auth - HTTP auth
* filters - Filter rexeps
Leave --dump-headers and --dump-bodies for the time being but remove
the other --dump-* flags as they aren't used very often.
* Fixup bitrot (rclone and Azure library)
* Implement Copy
* Add modtime to metadata under mtime key as RFC3339Nano
* Make multipart upload work
* Make it pass the integration tests
* Fix uploading of zero length blobs
* Rename to azureblob as it seems likely we will do azurefile
* Add docs
* use rclone's http.Client for bwlimit, logging, etc
* remove extraneous fmt.Sprintf from logging
* fix icon in docs
* add docs about --fast-list
* hoist md5 regexp compilation out of function
* create container if necessary on server side copy
* keep note of whether the container has been deleted
* build constraint not to compile for plan9
Add new package qingstor to support QingStor API.
Add new unit test for its and tested through; But I commented
on some tests case because of some of the features of QingStor.
Add new docs for it.
This simplifies the implementation of remotes. The only required
interface is now `List` which is a simple one level directory list.
Optionally remotes may implement `ListR` if they have an efficient way
of doing a recursive list.
This is a fix left over from the v2 conversion. Dropbox ignores the
client modification on an incoming file if it was identical to the
existing file. This change deletes the existing file first before
re-uploading the new one.
* -vv or --log-level DEBUG
* -v or --log-level INFO
* --log-level NOTICE (default)
* -q --log-level ERROR
Replace Config.Verbose and Config.Quiet with Config.LogLevel
Fixes#739Fixes#1108Fixes#1000
Optional interfaces are becoming more important in rclone,
--track-renames and --backup-dir both rely on them.
Up to this point rclone has used interface upgrades to define optional
behaviour on Fs objects. However when one Fs object wraps another it
is very difficult for this scheme to work accurately. rclone has
relied on specific error messages being returned when the interface
isn't supported - this is unsatisfactory because it means you have to
call the interface to see whether it is supported.
This change enables accurate detection of optional interfaces by use
of a Features struct as returned by an obligatory Fs.Features()
method. The Features struct contains flags and function pointers
which can be tested against nil to see whether they can be used.
As a result crypt and hubic can accurately reflect the capabilities of
the underlying Fs they are wrapping.
These are set in the form RCLONE_CONFIG_remote_option where remote is
the uppercased remote name and option is the uppercased config file
option name. Note that RCLONE_CONFIG_remote_TYPE must be set if
defining a new remote.
Fixes#616
Amazon Drive sometimes returns errors at the end of large uploads
* 408 REQUEST_TIMEOUT
* 504 GATEWAY_TIMEOUT
* 500 Internal error
The file may have been uploaded correctly though, so, on error, wait
for up to 2 minutes for it to appear if it was fully
uploaded (configure timeout with --acd-upload-wait-time).
Issues: #601#605#606
* Make move command check for overlapping remotes and refuse to run
* Do copy/delete rather than all the copies then all the deletes
* Doesn't purge the source - this was unexpected behaviour see #512 and #416
* Add -list-retries flag to test suite to control retries
This changes the semantics of `move` slightly. However it now errs on
the side of not deleting stuff.
These are for remotes to signal that they have a fatal error and don't
want to continue (eg cap exceeded) or that a particular file shouldn't
be retried for some reason.
If remote:path points to a file make NewFs return a sentinel error
fs.ErrorIsFile and an Fs which points to the parent.
Use this to remove the LimitedFs and just add this file to the
--files-from list.
This means that server side operations can be used also.
Fixes#518Fixes#545
This should fix duplicate files on drive and 409 errors on
amazonclouddrive however it will slow down the upload slightly as
another roundtrip will be needed.
None of the other Fses needed adjusting.
Fixes#483
Gives more accurate error propagation, control of depth of recursion
and short circuit recursion where possible.
Most of the the heavy lifting is done in the "fs" package, making file
system implementations a bit simpler.
This commit contains some code originally by Klaus Post.
Fixes#316
See #317 for details.
Use `rclone config` to add/change/remove password.
Tests that loads the default configuration will now fail with a better error message, and add a switch that makes it possible to disable password prompts and fail instead.
Make it possible to use the "RCLONE_CONFIG_PASS" environment variable as password for configuration.
