Before this change backend integration tests depended on each other,
so tests could not be retried.
After this change we nest tests to ensure that tests are provided with
the starting state they expect.
Tell the integration test runner that it can retry backend tests also.
This also includes bin/test_independence.go which runs each test
individually for a backend to prove that they are independent.
Before this change TestPurge would remove a container and subsequent
tests would fail because the container was still being deleted so
couldn't be created.
This was fixed by introducing an fstest.NewRunIndividual() test runner
for TestPurge which causes the test to be run on a new container.
- Make integration tests use a config file
- Output individual logs for each test
- Make HTML report and open browser
- Optionally email and upload results
Sometimes pcloud will leave a half uploaded file when the transfer
actually failed. This patch deletes the file if it exists.
This problem was spotted by the integration tests.
This change to go1.11 causes the TestFsPutError test to fail
https://go-review.googlesource.com/c/go/+/114316
This is because it now passes the half written file to the backend
whereas it didn't previously because of the buffering.
In this commit the size of the data written was increased to 5k from
50 bytes to provoke the test failure under go1.10 also.
* Fix errcheck and golint warnings
* Remove unused constants and fix comments
* Parse error responses properly
* Fix Open with RangeOption
* Fix Move, Copy and DirMove
* Implement DirCacheFlush
* Check interfaces are correct
* Remove debugs and update overview
* Correct feature flags
* Pare replacement characters down to the minimum set
* Add to the integration tests
Google cloud storage doesn't normally need retries, however certain
things (eg bucket creation and removal) are rate limited and do
generate 429 errors.
Before this change the integration tests would regularly blow up with
errors from GCS rate limiting bucket creation and removal.
After this change we low level retry all operations using the same
exponential backoff strategy as used in the google drive backend.
- make Close permanent and return errors afterwards
- use RangeSeek from the wrapped reader if present
- add a limit to chunk growth
- correct RangeSeek interface behavior
- add tests
List or ListR of an non existent directory must return
ErrorDirNotFound for non bucket based remotes. For bucket based
remotes it may return ErrorDirNotFound or it may return no error and
no entries.
* Implement about for:
* local, crypt, cache, drive, swift, hubic, onedrive, pcloud, dropbox
* Implement `--json` and `---full` flag for `rclone about`
* change About interface to return a Usage structure
* Remove operations.About as it is too thin an interface
* Implement Integration test
Relates to #1138 and #1564
This bug was introduced by the v3 API conversion in 07f20dd1fd.
The problem was that dircache.FindPath doesn't work for the root directory.
This adds an internal error for dircache.FindPath being called with
the root directory. This makes a failing test, which the fix to the
drive backend fixes.
This also improves the DirCache integration test.
Previous to this fix old notifications could creep in and cause the
test to fail. It also left files around which upset the TestObjectRemove test.
Fixes#2177
The purpose of this is to make it easier to maintain and eventually to
allow the rclone backends to be re-used in other projects without
having to use the rclone configuration system.
The new code layout is documented in CONTRIBUTING.
Now --dump-flag is written as --dump flag. This is a comma separated list which can contain
* headers - HTTP headers as before
* bodies - HTTP bodies as before
* requests - HTTP request bodies
* responses - HTTP response bodies
* auth - HTTP auth
* filters - Filter rexeps
Leave --dump-headers and --dump-bodies for the time being but remove
the other --dump-* flags as they aren't used very often.
* Fixup bitrot (rclone and Azure library)
* Implement Copy
* Add modtime to metadata under mtime key as RFC3339Nano
* Make multipart upload work
* Make it pass the integration tests
* Fix uploading of zero length blobs
* Rename to azureblob as it seems likely we will do azurefile
* Add docs
* use rclone's http.Client for bwlimit, logging, etc
* remove extraneous fmt.Sprintf from logging
* fix icon in docs
* add docs about --fast-list
* hoist md5 regexp compilation out of function
* create container if necessary on server side copy
* keep note of whether the container has been deleted
* build constraint not to compile for plan9
Add new package qingstor to support QingStor API.
Add new unit test for its and tested through; But I commented
on some tests case because of some of the features of QingStor.
Add new docs for it.
This simplifies the implementation of remotes. The only required
interface is now `List` which is a simple one level directory list.
Optionally remotes may implement `ListR` if they have an efficient way
of doing a recursive list.
This is a fix left over from the v2 conversion. Dropbox ignores the
client modification on an incoming file if it was identical to the
existing file. This change deletes the existing file first before
re-uploading the new one.
* -vv or --log-level DEBUG
* -v or --log-level INFO
* --log-level NOTICE (default)
* -q --log-level ERROR
Replace Config.Verbose and Config.Quiet with Config.LogLevel
Fixes#739Fixes#1108Fixes#1000
Optional interfaces are becoming more important in rclone,
--track-renames and --backup-dir both rely on them.
Up to this point rclone has used interface upgrades to define optional
behaviour on Fs objects. However when one Fs object wraps another it
is very difficult for this scheme to work accurately. rclone has
relied on specific error messages being returned when the interface
isn't supported - this is unsatisfactory because it means you have to
call the interface to see whether it is supported.
This change enables accurate detection of optional interfaces by use
of a Features struct as returned by an obligatory Fs.Features()
method. The Features struct contains flags and function pointers
which can be tested against nil to see whether they can be used.
As a result crypt and hubic can accurately reflect the capabilities of
the underlying Fs they are wrapping.
These are set in the form RCLONE_CONFIG_remote_option where remote is
the uppercased remote name and option is the uppercased config file
option name. Note that RCLONE_CONFIG_remote_TYPE must be set if
defining a new remote.
Fixes#616
Amazon Drive sometimes returns errors at the end of large uploads
* 408 REQUEST_TIMEOUT
* 504 GATEWAY_TIMEOUT
* 500 Internal error
The file may have been uploaded correctly though, so, on error, wait
for up to 2 minutes for it to appear if it was fully
uploaded (configure timeout with --acd-upload-wait-time).
Issues: #601#605#606
* Make move command check for overlapping remotes and refuse to run
* Do copy/delete rather than all the copies then all the deletes
* Doesn't purge the source - this was unexpected behaviour see #512 and #416
* Add -list-retries flag to test suite to control retries
This changes the semantics of `move` slightly. However it now errs on
the side of not deleting stuff.
These are for remotes to signal that they have a fatal error and don't
want to continue (eg cap exceeded) or that a particular file shouldn't
be retried for some reason.
If remote:path points to a file make NewFs return a sentinel error
fs.ErrorIsFile and an Fs which points to the parent.
Use this to remove the LimitedFs and just add this file to the
--files-from list.
This means that server side operations can be used also.
Fixes#518Fixes#545
This should fix duplicate files on drive and 409 errors on
amazonclouddrive however it will slow down the upload slightly as
another roundtrip will be needed.
None of the other Fses needed adjusting.
Fixes#483
Gives more accurate error propagation, control of depth of recursion
and short circuit recursion where possible.
Most of the the heavy lifting is done in the "fs" package, making file
system implementations a bit simpler.
This commit contains some code originally by Klaus Post.
Fixes#316
See #317 for details.
Use `rclone config` to add/change/remove password.
Tests that loads the default configuration will now fail with a better error message, and add a switch that makes it possible to disable password prompts and fail instead.
Make it possible to use the "RCLONE_CONFIG_PASS" environment variable as password for configuration.
* Make all integration tests start with an empty remote
* Add an -individual flag so this can be a different bucket/container/directory
* Fix up tests after changing the hashers
* Add sha1sum test
* Make directory checking in tests sleep more to fix acd inconsistencies
* Factor integration tests to make more maintainable
* Ensure remote writes have a fstest.CheckItems() before use
* this fixes eventual consistency on the directory listings later
* Call fs.Stats.ResetCounters() before every fs.Sync()
Note that the tests shouldn't be run concurrently as fs.Config is global state.
* Convert all paths to UNC paths on Windows.
* Update local filesystem to always use UNC paths.
* Change tests, so they can work with Windows character replacements.
* Remove "/" suffix on paths.
* Always use path/filepath
* Define Mover interface to move a single object
* Define DirMover interface to move a directory
* Implement DirMove operation
* Add `rclone move` command
* Tests for Dir Move
To Do
* Implement Move, DirMover in local, drive, dropbox
* unit test for Mover
* unit test for DirMover
This means that dropbox no longer stores MD5SUMs and modified times.
Fixup the tests so that blank MD5SUMs are ignored, and that if
Precision is set to a fs.ModTimeNotSupported, ModTimes can be ignored too.
This opens the door for other FSs which don't support metadata easily.
