This limit was previously 4k set in 59026c4761 however leaf
names above 1k now produce an IO error.
WinFSP seems to have its own method for dropping too long file names
above 255 long.
When wrapping a backend that supports Server Side Copy (e.g. `b2`, `s3`)
and configuring the `tmp_upload_path` option, the `cache` backend would
erroneously report that Server Side Copy/Move was not supported, causing
operations such as file moves to fail. This change fixes this issue
under these circumstances such that Server Side Copy will now be used
when the wrapped backend supports it.
Fixes#3206
Before this change there was some ambiguity about whether passwords
were obscured on not passing them into config create or config update.
This change adds the --obscure and --no-obscure flags to make the
intent clear.
It also updates the remote control and the tests.
Fixes#3728
This includes a new directory listing template which was originally
from the Caddy project (used with permission and copyright attribution).
This is used whenever we serve directory listings so `rclone serve
http`, `rclone serve webdav` and `rclone rcd --rc-serve`
This also modifies the tests so they work with the original template which
is easier to debug.
Before this change Windows would read a directory then immedately stat
every item in the directory.
After this change we return the stat information along with the
directory which stops so many callbacks.
Before this change, the current working directory could disappear
according to the Linux kernel.
This was caused by mount returning different nodes with the same
information in.
This change uses vfs.Node.SetSys to cache the information so we always
return the same node.
Before this change if you specified --hash MD5 in rclone lsf it would
calculate all the hashes and just return the MD5 hash which was very
slow on the local backend.
Likewise specifying --hash on rclone lsjson was equally slow.
This change introduces the --hash-type flag (and corresponding
internal parameter) so that the hashes required can be selected in
lsjson.
This is used internally in lsf when the --hash parameter is selected
to speed up the hashing by only hashing with the one hash specified.
Fixes#4181
These commands are for implementing backend specific
functionality. They have documentation which is placed automatically
into the backend doc.
There is a simple test for the feature in the backend tests.
The tests are now run for the mount commands and for the plain VFS.
This makes the tests much easier to debug when running with a VFS than
through a mount.
This allows rclone to exit with a non-zero return code if no files are
transferred. This is useful when calling rclone as part of a workflow/script
pipeline as it allows the end user to stop processing if no files have been
transferred.
NB: Enabling this option will return in rclone exiting non-zero if there are no
transfers. Depending on how your're currently using rclone in your scripts,
this may break existing setups!
--files-from parses input files by ignoring comments starting with # and ;
and stripping whitespace from start and end of strings.
The --files-from-raw flag was added that reads every line from the file ignoring
comment characters and not stripping whitespace while maintaining
backwards compatibility.
Fixes#3762
Basically, solving #3541 with a different approach - bringing in
the upstream upnpav module, and changing ChildCount from int to a
*int to avoid childCount="0" in the XML output when that value is
simply unknown.
Current approach is leading to some recursion issues and according
to the DLNA spec it shouldn't be necessary, anyway.
Before this changed we unconditionally fetched the MimeType. On Some
backends like s3 and swift this takes an extra transaction which meant
that `lsf` on those backends was needlessly slow.
This adds an internal option so `lsf` can declare whether it wants
MimeTypes or not depending on whether the user asked for them and an
external flag `--no-mimetype` for `lsjson`.
See: https://forum.rclone.org/t/reliably-setup-incremental-updates/14006/8
Unfortunately bcrypt only hashes the first 72 bytes of a given input
which meant that using it on ssh keys which are longer than 72 bytes
was incorrect.
This swaps over to using sha256 which should be adequate for the
purpose of protecting in memory passwords where the unencrypted
password is likely in memory too.
The failure is this which is not reproducable locally, only on the CI
servers.
--- FAIL: TestMount/CacheMode=minimal/TestWriteFileOverwrite (1.01s)
fs.go:351:
Error Trace: fs.go:351
write.go:65
Error: Received unexpected error:
open E:testwrite: The request could not be performed because of an I/O device error.
Test: TestMount/CacheMode=minimal/TestWriteFileOverwrite
The corresponding ERROR from the log is this:
ERROR : IO error: truncate C:\Users\runneradmin\AppData\Local\rclone\vfs\local\C\Users\RUNNER~1\AppData\Local\Temp\rclone298719627\testwrite: Access is denied.
Instead of using ioutil.WriteFile this fix uses an equivalent based on
rclone's lib/file which doesn't set the exclusive flag on
Windows. This allows files to be deleted that are open. It also
deletes existing files if an error is received and retries.
For few commands, RClone counts a error multiple times. This was fixed by
creating a new error type which keeps a flag to remember if the error has
already been counted or not. The CountError function now wraps the original
error eith the above new error type and returns it.
Before this change the race tests were taking too long. The bcrypt
function went from about 20ms to 1s under the race detector and this
is called for every transaction on webdav.
This change reduces the bcrypt strength so it takes 1ms non race so
the race tests pass and still has adequate security for in memory only
storage.
On google fs (drive, google photos, and google cloud storage), if
headless is selected, do not open browser.
This also supplies a new option "auth-no-open-browser" for authorize
if the user does not want it.
This should fix#3323.
Before this change `rclone mount` would give this error on FreeBSD
mount helper error: mount_fusefs: -o timeout=: option not supported
Because the default value for FreeBSD was set to 15m for
--daemon-timeout and that FreeBSD does not support the timeout option.
This change sets the default for --daemon-timeout to 0 on FreeBSD
which fixes the problem.
Fixes#3610
Before this change the sftp handler returned a nil error for unknown
operations which meant the server crashed when one was encountered.
In particular the "Readlink" operations was causing problems.
After this change the handler returns ErrSshFxOpUnsupported which
signals to the remote end that we don't support that operation.
See: https://forum.rclone.org/t/rclone-serve-sftp-not-working-in-windows/12209
If a file handle is duplicated with dup() and the duplicate handle is
flushed, rclone will go ahead and close the file, making the original
file handle stale. This change removes the close() call from Flush() and
replaces it with FlushWrites() so that the file only gets closed when
Release() is called. The new FlushWrites method takes care of actually
writing the file back to the underlying storage.
Fixes#3381
Seems to be some corner cases that are not being handled, so taking a different
approach that should be a little more robust.
Also, changing resources to be served under a subpath: We've been serving
media at /res?path=%2Fdir%2Ffilename.mp4; change that to be just /r/dir/filename.mp4.
It's cleaner, easier to reason about, and a necessary first step towards just
serving the resources via httplib anyway.
This problem was introduced in "mount: allow files of unkown size to
be read properly" 0baafb158f by failure to check that the
DirEntry was nil or not.
Allows for filename.srt, filename.en.srt, etc., to be automatically associated with video.mp4 (or whatever) when playing over dlna.
This is the "modern" method, which I've verified to work on VLC and in LG webOS 2. There is a vendor specific mechanism for Samsung that I havn't been able to get working on my F series.
Also made some minor corrections to logging and container IDs.
Before this change, files of unknown size (eg Google Docs) would
appear in file listings with 0 size and would only allow 0 bytes to be
read.
This change sets the direct_io flag in the FUSE return which bypasses
the cache for these files. This means that they can be read properly.
This is compatible with some, but not all applications.
This detects the presence of a VT100 terminal by using the TERM
environment variable and switches to using VT100 codes directly under
windows if it is found.
This makes --progress work correctly with git bash.
Before this change it was possible to make a remote with an invalid
name in the config file, either manually or with `rclone config
create` (but not with `rclone config`).
When this remote was used, because it was invalid, rclone would
presume this remote name was a local directory for a very suprising
user experience!
This change checks remote names more carefully and returns errors
- when the user tries to use an invalid remote name on the command line
- when an invalid remote name is used in `rclone config create/update/password`
- when the user tries to enter an invalid remote name in `rclone config`
This does not prevent the user entering a remote name with invalid
characters in the config manually, but such a remote will fail
immediately when it is used on the command line.
A workaround for #3489. Code in `__rclone_custom_func` relies on process substitutions `<(...)` to preserve changes of variables within `while` bodies, which is not supported in the posix mode.
Add a minimal number of mime types to augment go's built in types
for environments which don't have access to a mime.types file (eg
Termux on android)
Fixes#3475
Before this fix serve dlna was only using the built in database of
mime types to look up the mime types of files. On Android (and
possibly other systems) this is very small.
The symptoms of this problem was serve dlna only listing images and
not videos.
After this fix we use the backend's idea of the mime type if possible
which will be more accurate.
Fixes#3475
Before this change rclone marked files opened for write without VFS
cache with the non seekable flag.
This caused problems with rclone mount layerd with mergerfs.
This change removes the hint and lets rclone do all the checking for
seekability.
Before this change `rclone rc --loopback` would give the error "bad
JSON".
This was because the output of the `rc/list` command was not serialzed
through JSON.
This serializes it through JSON and fixes that (and probably other)
command.
rc: WebGUI should check for new update only when rc-web-gui-update is specified or not already downloaded.
rc: change permission to 0755 instead of 755 to prevent unexpected behaviour.
Before this change, using -P occasionally deadlocked on the progress
mutex and the stats mutex since they call each other.
This is fixed by shortening the locking window in the progress routine
so as not to include the stats calculation.
This was factored from fstest as we were including the testing
enviroment into the main binary because of it.
This was causing opening the browser to fail because of 8243ff8bc8.
