Before this change, lsf's time format was hard-coded to "2006-01-02 15:04:05",
regardless of the Fs's precision. After this change, a new optional
--time-format flag is added to allow customizing the format (the default is
unchanged).
Examples:
rclone lsf remote:path --format pt --time-format 'Jan 2, 2006 at 3:04pm (MST)'
rclone lsf remote:path --format pt --time-format '2006-01-02 15:04:05.000000000'
rclone lsf remote:path --format pt --time-format '2006-01-02T15:04:05.999999999Z07:00'
rclone lsf remote:path --format pt --time-format RFC3339
rclone lsf remote:path --format pt --time-format DateOnly
rclone lsf remote:path --format pt --time-format max
--time-format max will automatically truncate '2006-01-02 15:04:05.000000000'
to the maximum precision supported by the remote.
Before this change we were only counting moves as checks. This means
that when using `rclone move` the `Transfers` stat did not count up
like it should do.
This changes introduces a new primitive operations.MoveTransfers which
counts moves as Transfers for use where that is appropriate, such as
rclone move/moveto. Otherwise moves are counted as checks and their
bytes are not accounted.
See: #7183
See: https://forum.rclone.org/t/stats-one-line-date-broken-in-1-64-0-and-later/43263/
Before this change, if a multithread upload failed (let's say the
source became unavailable) rclone would finalise the file first before
aborting the transfer.
This caused the partial file to be written which would overwrite any
existing files.
This was fixed by making sure we Abort the transfer before Close-ing
it.
This updates the docs to encourage calling of Abort before Close and
updates writerAtChunkWriter to make sure that works properly.
This also reworks the tests to detect this and to make sure we upload
and download to each multi-thread capable backend (we were only
downloading before which isn't a full test).
Fixes#7071
For uploads which are coming from disk or going to disk or going to a
backend which doesn't need to seek except for retries this doesn't
buffer the input.
This dramatically reduces rclone's memory usage.
Fixes#7350
After the copy refactor:
179f978f75 operations: refactor Copy into methods on an temporary object
There was some confusion in the code about server side copies - should
they or shouldn't they use partials?
This manifested in unit test failures for remotes which supported
server side Copy and PartialUploads. This combination is rare and only
exists in the sftp backend with the --sftp-copy-is-hardlink flag.
This fix makes the choice that backends which set PartialUploads
always use partials even for server side copies.
operations.Copy had become very unwieldy. This refactors it into
methods on a copy object which is created for the duration of the
copy. This makes it much easier to read and reason about.
Before this change the concurrency used for an upload was rather
inconsistent.
- if size below `--backend-upload-cutoff` (default 200M) do single part upload.
- if size below `--multi-thread-cutoff` (default 256M) or using streaming
uploads (eg `rclone rcat) do multipart upload using
`--backend-upload-concurrency` to set the concurrency used by the uploader.
- otherwise do multipart upload using `--multi-thread-streams` to set the
concurrency.
This change makes the default for the concurrency used be the
`--backend-upload-concurrency`. If `--multi-thread-streams` is set and larger
than the `--backend-upload-concurrency` then that will be used instead.
This means that if the user sets `--backend-upload-concurrency` then it will be
obeyed for all multipart/multi-thread transfers and the user can override them
all with `--multi-thread-streams`.
See: #7056
- fix docs and error messages for multithread
- use sync/errgroup built in concurrency limiting
- re-arrange multithread code
- don't continue multi-thread uploads if one part fails
Before this change we showed both server side moves and server side
copies as bytes transferred.
This made a nice easy to use stats display, but also caused confusion
for users who saw unrealistic transfer times. It also caused a problem
with --max-transfer and chunker which renames each chunk after
uploading which was counted as a transfer byte.
This patch instead accounts the server side move and copy statistics
as a seperate lines in the stats display which will only appear if
there are any server side moves / copies. This is also output in the
rc.
This gives users something to look at when transfers are running which
was the point of the original change but it now means that transfer
bytes represents data transfers through this rclone instance only.
Fixes#7183
Before this change, the overlapping check could erroneously give this
error on case insensitive file systems:
Failed to sync: destination and parameter to --backup-dir mustn't overlap
The code was fixed and re-worked to be simpler and more reliable.
See: https://forum.rclone.org/t/backup-dir-cannot-be-in-root-even-when-excluded/39844/
Before this change the new partial downloads code was causing symlinks
to be copied as regular files.
This was because the partial isn't named .rclonelink so the local
backend saves it as a normal file and renaming it to .rclonelink
doesn't cause it to become a symlink.
This fixes the problem by not copying .rclonelink files using the
partials mechanism but reverting to the previous --inplace behaviour.
This could potentially be fixed better in the future by changing the
local backend Move to change files to and from symlinks depending on
their name. However this was deemed too complicated for a point
release.
This also adds a test in the local backend. This test should ideally
be in operations but it isn't easy to put it there as operations knows
nothing of symlinks.
Fixes#7101
See: https://forum.rclone.org/t/reggression-in-v1-63-0-links-drops-the-rclonelink-extension/39483
The --progress flag overrides operations.SyncPrintf in order to do its
magic on stdout without interfering with other output.
Before this change the syncFprintf routine in operations (which is
used to print all output to stdout) was taking the
operations.StdoutMutex and the printProgress function in the
--progress routine was also attempting to take the same mutex causing
a deadlock.
This patch fixes the problem by moving the locking from the
syncFprintf function to SyncPrintf. It is then up to the function
overriding this to lock the StdoutMutex. This ensures the StdoutMutex
can never cause a deadlock.
when multi-thread downloading is enabled, rclone used
to send a write to disk after every read, resulting in a lot
of small writes to different locations of the file.
depending on the underlying filesystem or device, it can be more
efficient to send bigger writes.
Before this change partially uploaded files (when --inplace is not in
effect) would be left lying around in the file system if rclone was
killed in the middle of a transfer.
This adds an exit handler to remove the file and removes it when the
file is complete.
Before this change, some parts of operations called the Open method on
objects directly, and some called NewReOpen to make an object which
can re-open itself on errors.
This adds a new function operations.Open which should be called
instead of fs.Object.Open to open a reliable stream of data and
changes all call sites to use that.
This means `rclone check --download` and `rclone cat` will re-open
files on failures.
See: https://forum.rclone.org/t/does-rclone-support-retries-for-check-when-using-download-flag/38641
Before this change we tested special errors for straight equality.
This works for all normal backends, but the union backend may return
wrapped errors which contain the special error types.
In particular if a pcloud backend was part of a union when attempting
to set modification times the fs.ErrorCantSetModTime return wasn't
understood because it was wrapped in a union.Error.
This fixes the problem by using errors.Is instead in all the
comparisons in operations.
See: https://forum.rclone.org/t/failed-to-set-modification-time-1-error-pcloud-cant-set-modified-time/38596
When copying to a backend which has the PartialUploads feature flag
set and can Move files the file is copied into a temporary name first.
Once the copy is complete, the file is renamed to the real
destination.
This prevents other processes from seeing partially downloaded copies
of files being downloaded and prevents overwriting the old file until
the new one is complete.
This also adds --inplace flag that can be used to disable the partial
file copy/rename feature.
See #3770
Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>
When using `rclone cat` to print the contents of several files, the
user may want to inject some separator between the files, such as a
comma or a newline. This patch adds a `--separator` option to the `cat`
command to make that possible. The default value remains an empty
string, `""`, maintaining the prior behavior of `rclone cat`.
Closes#6968
If a file has two (or more) extensions and the second (or subsequent)
extension is recognised as a valid mime type, then the suffix will go
before that extension. So `file.tar.gz` would be backed up to
`file-2019-01-01.tar.gz` whereas `file.badextension.gz` would be
backed up to `file.badextension-2019-01-01.gz`
Fixes#6892
