Previous to this change rclone cached the looked up root_folder_id in
the root_folder_id config variable.
This has caused a lot of confusion and a few attempts at workarounds
and ultimately was a mistake.
This reverts rclone attempting to cache anything in root_folder_id and
returns that variable to be entirely user modified.
It gives a little hint in the debug that rclone could be sped up
slightly by setting it, but it is up to the user to think about
whether that would be OK or not.
Google drive root '': root_folder_id = "XXX" - save this in the config to speed up startup
It does not change root_folder_id itself, leaving this to the user.
See: https://forum.rclone.org/t/rclone-gdrive-no-longer-returning-anything/17215
- add a directory to the optional Purge interface
- fix up all the backends
- add an additional integration test to test for the feature
- use the new feature in operations.Purge
Many of the backends had been prepared in advance for this so the
change was trivial for them.
Previous to this a dangling shortcut would error the directory
listing.
This patch makes dangling shortcuts appear as 0 sized objects in the
directory listing so they can be deleted. These objects can't be read
though.
In this commit
5c5ad6220 drive: fix --drive-impersonate with cached root_folder_id
We disabled the use of root_folder_id with --drive-impersonate to fix
a problem with a cached root_folder_id giving the wrong results.
This, alas, broke one users setup with a root_folder_id of
appDataFolder. Since this is identifiable and definitely couldn't have
been cached, we can safely skip this check in this case.
See: https://forum.rclone.org/t/rclone-gdrive-no-longer-returning-anything/17215/10
Before this change there was lots of duplicated code in all the
dircache using backends to support DirMove.
This change factors this code into the dircache library.
Dircache was changed to:
- Remove special cases for the root directory
- Remove Fatal errors
- Call FindRoot on behalf of the user wherever possible
- Bring up to modern Go standards
Backends were changed to:
- Remove calls to FindRoot
- Change calls to FindRootAndPath to FindPath
- Don't make special cases for the root
This fixes several corner cases, for example removing a non existent
directory if FindRoot hasn't been called.
Before this fix rclone v1.51 and 1.52 would incorrectly use the cached
root_folder_id when the --drive-impersonate flag was in use. This
meant that rclone could be looking up the wrong directory ID with
unpredictable results - usually all files apparently being missing.
This fix makes rclone look up the root_folder_id always when using
--drive-impersonate. It does this by clearing the root_folder_id and
making a NOTICE message that it is ignoring the cached value.
It also stops rclone caching the root_folder_id when using
--drive-impersonate.
See: https://forum.rclone.org/t/rclone-gdrive-no-longer-returning-anything/17215
This adds expire and unlink fields to the PublicLink interface.
This fixes up the affected backends and removes unlink parameters
where they are present.
This is caused by a bug in Google drive where, in some circumstances
querying for "(A in parents) or (B in parents)" returns nothing
whereas querying for "A in parents" and "B in parents" separately
works fine.
This has been reported here:
https://issuetracker.google.com/issues/149522397
This workaround detects this condition by seeing if a listing for more
than one directory at once returns nothing.
If it does then it retries each one individually.
This can potentially have a false positive if the user has multiple
empty directories which are queried at once. The consequence of this
will be that ListR is disabled for a while until the directories are
found to be actually empty in which case it will be re-enabled.
Fixes#3114 and Fixes#4289
This reverts commit 9e4b68a364.
This does not work as intended - it only changes docs files and to
make it change drive files would take an extra roundtrip.
I think the sematics of server side copy are now correct - additional
features should be added with a new flag.
See #4230
When server side copying Google docs files we attempt to preserve the
description.
This patch makes it so that we use the default description if the
original description was empty.
See: 6fdd7149c1 (commitcomment-38008638)
This also fixes typo in the name of the function, and allows making
shortcuts from the root directory which are useful in cross drive
shortcut creation.
This also adds a basic suite of tests for creating listing, removing
shortcuts.
This means that we can return ErrorNotAFile when there is an object
with the same name as a directory rather than potentially creating a
duplicate name.
Before this change rclone would skip all shortcuts with a message
Ignoring unknown document type "application/vnd.google-apps.shortcut"
After this message rclone resolves the shortcuts by default to the
actual files that they point to. See the docs for more info.
The --drive-skip-shortcuts flag can be used to skip shortcuts.
Before this change the newObject* functions could return object=nil
with err=nil. The result of these functions are passed outside of the
backend code (eg in Copy, Move) and returning a nil object with a nil
error leads to crashes elsewhere as it breaks expectations.
After this change we return (nil, fs.ErrorObjectNotFound) in these
cases. The one place this is actually needd internally (when turning
items into listings) we detect that error and use it to mean skip the
directory item.
This problem was noticed while testing the shortcuts code. It
shouldn't happen normally but it is conceivable it could.
Rclone can't safely delete files with multiple parents without
PATCHing the parents list. This can be done, but since multiple
parents are going away to be replaced by drive shortcuts we return an
error for now.
See #4013
Before this change shared with me items with multiple parents (ie most
of them that aren't in the root) would appear twice in the directory
listings.
This fixes the problem by doing an early exit for shared with me
items.
This bug was introduced here by removing some necessary code detecting
shared with me items at the root with no parents.
4453fa4ba6 "drive: fix --fast-list when using appDataFolder"
This fix reverts that part of the patch.
Fixes#4018
This hides:
- "use_created_date"
- "use_shared_date"
- "size_as_quota"
from the configurator (rclone config) as they interfere with normal
operations and shouldn't be set in a backend config.
They can still be put in the config file by hand and will still work
as variables, etc.
This adds some more docs to "size_as_quota" also.
Fixes#3912
Before this change we used non multipart uploads for files of unknown
size (streaming and uploads in mount). This is slower and less
reliable and is not recommended by Google for files smaller than 5MB.
After this change we use multipart resumable uploads for all files of
unknown length. This will use an extra transaction so is less
efficient for files under the chunk size, however the natural
buffering in the operations.Rcat call specified by
`--streaming-upload-cutoff` will overcome this.
See: https://forum.rclone.org/t/upload-behaviour-and-speed-when-using-vfs-cache/9920/
If the --drive-stop-on-upload-limit flag is in effect this checks the
error string from Google Drive to see if it is the error you get when
you've breached your 750GB a day limit.
If so then it turns this error into a Fatal error which should stop
the sync.
Fixes#3857
In listings if the ID `appDataFolder` is used to list a directory the
parents of the items returned have the actual ID instead the alias
`appDataFolder`. This confused the ListR routine into ignoring all
these items.
This change makes the listing routine accept all parent IDs returned
if there was only one ID in the query. This fixes the `appDataFolder`
problem. This means we are relying on Google Drive to only return the
items we asked for which is probably OK.
Fixes#3851
Before this change rclone used the team_drive ID as the root if set
even if the root_folder_id was set too.
This change uses the root_folder_id in preference over the team_drive
which restores the functionality.
This problem was introduced by ba7c2ac443Fixes#3742
We attempt to find the ID of the root folder by doing a GET on the
folder ID "root". With scope "drive.files" this fails with a 404
message.
After this change if we get the 404 message, we just carry on using
"root" as the root folder ID and we cache that for future lookups.
This means that changenotify messages will not work correctly in the
root folder but otherwise has minor consequences.
See: https://forum.rclone.org/t/fresh-raspberry-pi-build-google-drive-404-error-failed-to-ls-googleapi-error-404-file-not-found/12791
Before this fix we neglected to add the shared drive ID to the request
when asking for an initial change notify token and this caused a lot
more results to be returned than was necessary.
When we changed recursive lists to use --fast-list by default this
broke listing with --drive-shared-with-me from the root.
This turned out to be an unwarranted assumption in the ListR code that
all items would have a parent folder that we had searched for - this
isn't true for shared with me items.
This was fixed when using --drive-shared-with-me to give items that
didn't have any parents a synthetic parent.
Fixes#3639
Before this change we used the id "root" as an alias for the root drive ID.
However this causes problems when we receive IDs back from drive which
are not in this format and have been expanded to their canonical ID.
This change looks up the ID "root" and stores it in the
"drive_folder_id" parameter in the config file.
This helps with
- Notifying changes at the root
- Files shared with me at the root
See #3639
Before this change when rclone was compiled with go1.13 it used HTTP/2
to contact drive by default.
This causes lockups and INTERNAL_ERRORs from the HTTP/2 code.
This is a workaround disabling the HTTP/2 code on an option.
It can be re-enabled with `--drive-disable-http2=false`
See #3631
Before this change rclone was sending a MimeType in the requests for
server side Move and Copy.
The conjecture is that if you attempt to set the MimeType to something
different in a Copy then Google Drive has to do an actual copy of the
file data. This takes a very long time (since it is large) and fails
after a 90s timeout.
After the change we no longer set the MimeType in Move or Copy and the
copies happen instantly and correctly.
Many thanks to @darthShadow for discovering that this was causing the
problem.
Fixes#3070Fixes#3033Fixes#3300Fixes#3155
- Change rclone/fs interfaces to accept context.Context
- Update interface implementations to use context.Context
- Change top level usage to propagate context to lover level functions
Context propagation is needed for stopping transfers and passing other
request-scoped values.
In #2728 and 55b9a4e we decided to allow server side operations
between google drives with different configurations.
This works in some cases (eg between teamdrives) but does not work in
the general case, and this caused breakage in quite a number of
people's workflows.
This change makes the feature conditional on the
--drive-server-side-across-configs flag which defaults to off.
See: https://forum.rclone.org/t/gdrive-to-gdrive-error-404-file-not-found/9621/10Fixes#3119
Before this change a range request on a 0 length file would fail
$ rclone cat --head 128 drive:test/emptyfile
ERROR : open file failed: googleapi: Error 416: Request range not satisfiable, requestedRangeNotSatisfiable
To fix this we remove Range: headers on requests for zero length files.
Make the pacer package more flexible by extracting the pace calculation
functions into a separate interface. This also allows to move features
that require the fs package like logging and custom errors into the fs
package.
Also add a RetryAfterError sentinel error that can be used to signal a
desired retry time to the Calculator.
Before this change any attempt to access a google doc in an rclone
mount would give the error "partial downloads are not supported while
exporting Google Documents" as the mount uses ranged requests to read
data.
This implements ranged requests for a limited number of scenarios,
just enough so that Google docs can be cat-ed from an rclone mount.
When they are cat-ed then they receive their correct size also.
* drive: don't run teamdrive config if auto confirm set
* onedrive: don't run extra config if auto confirm set
* make Confirm results customisable by config
Fixes#1010
Before this change backend integration tests depended on each other,
so tests could not be retried.
After this change we nest tests to ensure that tests are provided with
the starting state they expect.
Tell the integration test runner that it can retry backend tests also.
This also includes bin/test_independence.go which runs each test
individually for a backend to prove that they are independent.
When moving a directory in drive, most of the time only a notification
for the directory itself is created, not the old or new parents.
This tires to find the old path in the dirCache and the new path with
the dirCache of the new parent, which can result in two notifications
for a moved directory.
Add a new flag to the drive backend to allow document conversions oni upload.
The existing --drive-formats flag has been renamed to --drive-export-formats.
The old flag is still working to be backward compatible.
Make use of the mime package to find matching extensions and mime types.
For simplicity, all extensions are now prefixed with "." to match the
mime package requirements.
Parsed extensions get converted if needed.
Add --drive-v2-download-min-size flag to allow downloading files via the
drive v2 API. If files are greater than this flag, a download link is
generated when needed. The flag is disabled by default.
