This converts the ChunkedReader into an interface and provides two
implementations one sequential and one parallel.
This can be used to improve the performance of the VFS on high
bandwidth or high latency links.
Fixes#4760
The vfs use the hardcoded OS encoding when creating temp file,
but decode it with encoding for the local filesystem (--local-encoding)
when copying it to remote.
This caused failures when the filenames contained special characters.
The hardcoded OS encoding is now used uniformly.
This also
- move in use options (Opt) from vfsflags to vfscommon
- change os.FileMode to vfscommon.FileMode in parameters
- rework vfscommon.FileMode and add tests
Before this change a panic could be overwritten with the message
fatal error: sync: unlock of unlocked mutex
This was because we temporarily unlocked the mutex, but failed to lock
it again if there was a panic.
This is code is never the cause of an error but it masks the
underlying error by overwriting the panic cause.
See: https://forum.rclone.org/t/serve-webdav-is-crashing-fatal-error-sync-unlock-of-unlocked-mutex/46300
Before this change, if a file shrunk in size on the remote then rclone
could get into an loop trying to download the file forever.
The symptom was repeating errors like this:
vfs cache: restart download failed: failed to start downloader: failed to open downloader: vfs reader: failed to open source file: invalid seek position
The fix was to check that file size in various places and makes sure
that we weren't trying to download too much data.
This was a problems with backends (like s3) which update the size of
the object on Open to the actual size of the object.
Before this change it wasn't possible to see where transfers were
going from and to in core/stats and core/transferred.
When use in rclone mount in particular this made interpreting the
stats very hard.
Before this change the VFS cache could get into a state where when an
object was updated remotely, the fingerprint of the item was correct
for the new object but the data in the VFS cache was for the old
object.
This fixes the problem by updating the fingerprint of the item at the
point we remove the stale data. The empty cache item now represents
the new item even though it has no data in.
This stops the fallback code for an empty fingerprint running (used
when we are writing items to the cache instead of reading them) which
was causing the problem.
Fixes#6053
See: https://forum.rclone.org/t/cached-webdav-mount-fingerprints-get-nuked-on-ls/43974/
Before this change if a backend can't upload 0 length files and
`--vfs-cache-mode writes` was in use then the writeback logic would
try to upload the 0 length file forever.
This change causes it to exit on the first failure to upload.
Before this patch a deadlock could occur if the cache cleaner was
running when an object upload finished.
This fixes the problem by delaying marking the object as clean until
we have notified the VFS layer. This means that the cache cleaner
won't consider the object until **after** the VFS layer has been
notified, thus avoiding the deadlock.
See: https://forum.rclone.org/t/rclone-mount-deadlock-when-dir-cache-time-strikes/33486/
Before this change we truncated files in the backing store regardless
of whether we needed to or not.
After, we check to see if the file is the right size and don't
truncate if it is.
Apparently Windows Defender likes to check executables each time they
are modified, and truncating a file to its existing size is enough to
trigger the Windows Defender scan. This was causing a big slowdown for
operations which opened and closed the file a lot, such as looking at
properties on an executable.
See: https://forum.rclone.org/t/for-mount-sftp-why-right-click-on-exe-file-is-so-slow-until-it-freezes/33830
Before this change if we copied files of unknown size, then they lost
their metadata.
This was particularly noticeable using --s3-decompress.
This change adds metadata to Rcat and RcatSized and changes Copy to
pass the metadata in when it calls Rcat for an unknown sized input.
Fixes#6546
Before this change the VFS cache cleaner would loop indefinitely while
the cache was above quota. This used up all the CPU.
This fix prevents the cache cleaner from looping. It will be kicked on
ENOSPACE and run in its scheduled time otherwise so this should be
sufficient.
See: https://forum.rclone.org/t/vfs-keeps-checking-same-files/32120
This message is a double panic and was actually caused by an assertion
panic in:
vfs/vfscache/downloaders/downloaders.go
This is triggered by the code added relatively recently to fix a bug
with renaming files:
ec72432cec vfs: fix failed to _ensure cache internal error: downloaders is nil error
So it appears that item.o may be nil at this point.
This patch detects item.o being nil and fetches it again with NewObject.
Fixes#6190Fixes#6235
When using filepath.Dir, a difference to path.Dir is that it returns os PathSeparator
instead of slash when the path consists entirely of separators.
Also fixed casing of the function name, use OS in all caps instead of Os
as recommended here: https://github.com/golang/go/wiki/CodeReviewComments#initialisms
This error was caused by renaming an open file.
When the file was renamed in the cache, the downloaders were cleared,
however the downloaders were not re-opened when needed again, instead
this error was generated.
This fix re-opens the downloaders if they have been closed by renaming
the file.
Fixes#5984
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
This replaces built-in os.MkdirAll with a patched version that stops the recursion
when reaching the volume part of the path. The original version would continue recursion,
and for extended length paths end up with \\? as the top-level directory, and the error
message would then be something like:
mkdir \\?: The filename, directory name, or volume label syntax is incorrect.
Before this change, if there was an existing file being uploaded when
a file was renamed on top of it, then both would be uploaded. This
causes a duplicate in Google Drive as both files get uploaded at the
same time. This was triggered reliably by LibreOffice saving doc
files.
This fix removes any duplicates in the upload queue on rename.
Before this change but after:
aea8776a43 vfs: fix modtimes not updating when writing via cache #4763
When a file was opened read-only the modtime was read from the cached
file. However this modtime wasn't correct leading to an incorrect
result.
This change fixes the definition of `item.IsDirty` to be true only
when the data is dirty. This fixes the problem as a read only file
isn't considered dirty.
Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M.
Extends binary suffix output with letter i, e.g. Ki and Mi.
Centralizes creation of bit/byte unit strings.
The vfs-cache-max-size parameter is probably confusing to many users.
The cache cleaner checks cache size periodically at the --vfs-cache-poll-interval
(default 60 seconds) interval and remove cache items in the following order.
(1) cache items that are not in use and with age > vfs-cache-max-age
(2) if the cache space used at this time still is larger than
vfs-cache-max-size, the cleaner continues to remove cache items that are
not in use.
The cache cleaning process does not remove cache items that are currently in use.
If the total space consumed by in-use cache items exceeds vfs-cache-max-size, the
periodical cache cleaner thread does not do anything further and leaves the in-use
cache items alone with a total space larger than vfs-cache-max-size.
A cache reset feature was introduced in 1.53 which resets in-use (but not dirty,
i.e., not being updated) cache items when additional cache data incurs an ENOSPC
error. But this code was not activated in the periodical cache cleaning thread.
This patch adds the cache reset step in the cache cleaner thread during cache
poll to reset cache items until the total size of the remaining cache items is
below vfs-cache-max-size.
The initial ':' is included in the ad-hoc remote name, but is illegal character
in Windows path. Replacing it with '^', which is legal in filesystems but illegal
in regular remote names, so name conflict is avoided.
Fixes#4544
