Before this change, if rclone is used as a library and logrus is used
after a call to rc `sync/bisync`, logging does not work anymore and
leads to writing to a closed pipe.
This change restores the output correctly.
Fixes#8158
Before this change, when a file was new/changed on both paths (relative to the
prior sync), and the versions on each side were not identical, bisync would
keep both versions, renaming them with ..path1 and ..path2 suffixes,
respectively. Many users have requested more control over how bisync handles
such conflicts -- including an option to automatically select one version as
the "winner" and rename or delete the "loser". This change introduces support
for such options.
--conflict-resolve CHOICE
In bisync, a "conflict" is a file that is *new* or *changed* on *both sides*
(relative to the prior run) AND is *not currently identical* on both sides.
`--conflict-resolve` controls how bisync handles such a scenario. The currently
supported options are:
- `none` - (the default) - do not attempt to pick a winner, keep and rename
both files according to `--conflict-loser` and
`--conflict-suffix` settings. For example, with the default
settings, `file.txt` on Path1 is renamed `file.txt.conflict1` and `file.txt` on
Path2 is renamed `file.txt.conflict2`. Both are copied to the opposite path
during the run, so both sides end up with a copy of both files. (As `none` is
the default, it is not necessary to specify `--conflict-resolve none` -- you
can just omit the flag.)
- `newer` - the newer file (by `modtime`) is considered the winner and is
copied without renaming. The older file (the "loser") is handled according to
`--conflict-loser` and `--conflict-suffix` settings (either renamed or
deleted.) For example, if `file.txt` on Path1 is newer than `file.txt` on
Path2, the result on both sides (with other default settings) will be `file.txt`
(winner from Path1) and `file.txt.conflict1` (loser from Path2).
- `older` - same as `newer`, except the older file is considered the winner,
and the newer file is considered the loser.
- `larger` - the larger file (by `size`) is considered the winner (regardless
of `modtime`, if any).
- `smaller` - the smaller file (by `size`) is considered the winner (regardless
of `modtime`, if any).
- `path1` - the version from Path1 is unconditionally considered the winner
(regardless of `modtime` and `size`, if any). This can be useful if one side is
usually more trusted or up-to-date than the other.
- `path2` - same as `path1`, except the path2 version is considered the
winner.
For all of the above options, note the following:
- If either of the underlying remotes lacks support for the chosen method, it
will be ignored and fall back to `none`. (For example, if `--conflict-resolve
newer` is set, but one of the paths uses a remote that doesn't support
`modtime`.)
- If a winner can't be determined because the chosen method's attribute is
missing or equal, it will be ignored and fall back to `none`. (For example, if
`--conflict-resolve newer` is set, but the Path1 and Path2 modtimes are
identical, even if the sizes may differ.)
- If the file's content is currently identical on both sides, it is not
considered a "conflict", even if new or changed on both sides since the prior
sync. (For example, if you made a change on one side and then synced it to the
other side by other means.) Therefore, none of the conflict resolution flags
apply in this scenario.
- The conflict resolution flags do not apply during a `--resync`, as there is
no "prior run" to speak of (but see `--resync-mode` for similar
options.)
--conflict-loser CHOICE
`--conflict-loser` determines what happens to the "loser" of a sync conflict
(when `--conflict-resolve` determines a winner) or to both
files (when there is no winner.) The currently supported options are:
- `num` - (the default) - auto-number the conflicts by automatically appending
the next available number to the `--conflict-suffix`, in chronological order.
For example, with the default settings, the first conflict for `file.txt` will
be renamed `file.txt.conflict1`. If `file.txt.conflict1` already exists,
`file.txt.conflict2` will be used instead (etc., up to a maximum of
9223372036854775807 conflicts.)
- `pathname` - rename the conflicts according to which side they came from,
which was the default behavior prior to `v1.66`. For example, with
`--conflict-suffix path`, `file.txt` from Path1 will be renamed
`file.txt.path1`, and `file.txt` from Path2 will be renamed `file.txt.path2`.
If two non-identical suffixes are provided (ex. `--conflict-suffix
cloud,local`), the trailing digit is omitted. Importantly, note that with
`pathname`, there is no auto-numbering beyond `2`, so if `file.txt.path2`
somehow already exists, it will be overwritten. Using a dynamic date variable
in your `--conflict-suffix` (see below) is one possible way to avoid this. Note
also that conflicts-of-conflicts are possible, if the original conflict is not
manually resolved -- for example, if for some reason you edited
`file.txt.path1` on both sides, and those edits were different, the result
would be `file.txt.path1.path1` and `file.txt.path1.path2` (in addition to
`file.txt.path2`.)
- `delete` - keep the winner only and delete the loser, instead of renaming it.
If a winner cannot be determined (see `--conflict-resolve` for details on how
this could happen), `delete` is ignored and the default `num` is used instead
(i.e. both versions are kept and renamed, and neither is deleted.) `delete` is
inherently the most destructive option, so use it only with care.
For all of the above options, note that if a winner cannot be determined (see
`--conflict-resolve` for details on how this could happen), or if
`--conflict-resolve` is not in use, *both* files will be renamed.
--conflict-suffix STRING[,STRING]
`--conflict-suffix` controls the suffix that is appended when bisync renames a
`--conflict-loser` (default: `conflict`).
`--conflict-suffix` will accept either one string or two comma-separated
strings to assign different suffixes to Path1 vs. Path2. This may be helpful
later in identifying the source of the conflict. (For example,
`--conflict-suffix dropboxconflict,laptopconflict`)
With `--conflict-loser num`, a number is always appended to the suffix. With
`--conflict-loser pathname`, a number is appended only when one suffix is
specified (or when two identical suffixes are specified.) i.e. with
`--conflict-loser pathname`, all of the following would produce exactly the
same result:
```
--conflict-suffix path
--conflict-suffix path,path
--conflict-suffix path1,path2
```
Suffixes may be as short as 1 character. By default, the suffix is appended
after any other extensions (ex. `file.jpg.conflict1`), however, this can be
changed with the `--suffix-keep-extension` flag (i.e. to instead result in
`file.conflict1.jpg`).
`--conflict-suffix` supports several *dynamic date variables* when enclosed in
curly braces as globs. This can be helpful to track the date and/or time that
each conflict was handled by bisync. For example:
```
--conflict-suffix {DateOnly}-conflict
// result: myfile.txt.2006-01-02-conflict1
```
All of the formats described [here](https://pkg.go.dev/time#pkg-constants) and
[here](https://pkg.go.dev/time#example-Time.Format) are supported, but take
care to ensure that your chosen format does not use any characters that are
illegal on your remotes (for example, macOS does not allow colons in
filenames, and slashes are also best avoided as they are often interpreted as
directory separators.) To address this particular issue, an additional
`{MacFriendlyTime}` (or just `{mac}`) option is supported, which results in
`2006-01-02 0304PM`.
Note that `--conflict-suffix` is entirely separate from rclone's main `--sufix`
flag. This is intentional, as users may wish to use both flags simultaneously,
if also using `--backup-dir`.
Finally, note that the default in bisync prior to `v1.66` was to rename
conflicts with `..path1` and `..path2` (with two periods, and `path` instead of
`conflict`.) Bisync now defaults to a single dot instead of a double dot, but
additional dots can be added by including them in the specified suffix string.
For example, for behavior equivalent to the previous default, use:
```
[--conflict-resolve none] --conflict-loser pathname --conflict-suffix .path
```
Before this change, bisync used the "canonical" Fs name in the filename for its
listing files, including any {hexstring} suffix. An unintended consequence of
this was that if a user added a backend-specific flag from the command line
(thus "overriding" the config), bisync would fail to find the listing files it
created during the prior run without this flag, due to the path now having a
{hexstring} suffix that wasn't there before (or vice versa, if the flag was
present when the session was established, and later removed.) This would
sometimes cause bisync to fail with a critical error (if no listing existed
with the alternate name), or worse -- it would sometimes cause bisync to use an
old, incorrect listing (if old listings with the alternate name DID still
exist, from before the user changed their flags.)
After this change, the issue is fixed by always normalizing the SessionName to
the non-canonical version (no {hexstring} suffix), regardless of the flags. To
avoid a breaking change, we first check if a suffixed listing exists. If so, we
rename it (and overwrite the non-suffixed version, if any.) If not, we carry on
with the non-suffixed version. (We should only find a suffixed version if
created prior to this commit.)
The result for the user is that the same pair of paths will always use the same
.lst filenames, with or without backend-specific flags.
Refactored the case / unicode normalization logic to be much more efficient,
and fix the last outstanding issue from #7270. Before this change, we were
doing lots of for loops and re-normalizing strings we had already normalized
earlier. Now, we leave the normalizing entirely to March and avoid
re-transforming later, which seems to make a large difference in terms of
performance.
Before this change, bisync needed to build a full listing for Path1, then a
full listing for Path2, then compare them -- and each of those tasks needed to
finish before the next one could start. In addition to being slow and
inefficient, it also caused real problems if a file changed between the time
bisync checked it on Path1 and the time it checked the corresponding file on
Path2.
This change solves these problems by listing both paths concurrently, using
the same March infrastructure that check and sync use to traverse two
directories in lock-step, optimized by Go's robust concurrency support.
Listings should now be much faster, and any given path is now checked
nearly-instantaneously on both sides, minimizing room for error.
Further discussion:
https://forum.rclone.org/t/bisync-bugs-and-feature-requests/37636#:~:text=4.%20Listings%20should%20alternate%20between%20paths%20to%20minimize%20errors
Before this change, if there were changes to sync, bisync listed each path
twice: once before the sync and once after. The second listing caused quite
a lot of problems, in addition to making each run much slower and more
expensive. A serious side-effect was that file changes could slip through
undetected, if they happened to occur while a sync was running (between the
first and second listing snapshots.)
After this change, the second listing is eliminated by getting the underlying
sync operation to report back a list of what it changed. Not only is this more
efficient, but also much more robust to concurrent modifications. It should no
longer be necessary to avoid make changes while it's running -- bisync will
simply learn about those changes next time and handle them on the next run.
Additionally, this also makes --check-sync usable again.
For further discussion, see:
https://forum.rclone.org/t/bisync-bugs-and-feature-requests/37636#:~:text=5.%20Final%20listings%20should%20be%20created%20from%20initial%20snapshot%20%2B%20deltas%2C%20not%20full%20re%2Dscans%2C%20to%20avoid%20errors%20if%20files%20changed%20during%20sync
