Before this change using --max-duration and --cutoff-mode soft would
work like --cutoff-mode hard.
This bug was introduced in this commit which made transfers be
cancelable - before that transfers couldn't be canceled.
122a47fba6 accounting: Allow transfers to be canceled with context #3257
This change adds the timeout to the input context for reading files
rather than the transfer context so the files transfers themselves
aren't canceled if --cutoff-mode soft is in action.
This also adds a test for cutoff mode soft and max duration which was
missing.
See: https://forum.rclone.org/t/max-duration-and-retries-not-working-correctly/27738
In commit
3ccf222acb sync: overlap check is now filter-sensitive
The tests were attempting to write invalid objects on some backends
due to a leading / on the object name.
This fix also adds a few more test cases and makes sure the tests can
be run individually.
In commit
da404dc0f2 sync,copy: Fix --fast-list --create-empty-src-dirs and --exclude
The fix caused DirTree.AddDir to be called with the root directory.
This in turn caused a spurious directory entry in the DirTree which
caused tests with the -fast-list flag to fail with directory not found
errors.
Differentiate output of 'config show remote' command from listing options as part
of interactive config process for consistency: 'config show remote' consistent with
'config show', while listing in interactive config consistent with other output.
See #6211
Previously, the overlap check was based on simple prefix checks of the source and destination paths. Now it actually checks whether the destination is excluded via any filter rule or a "--exclude-if-present"-file.
Before this change, if --fast-list was in use while doing a sync or
copy with --create-empty-src-dirs and --exclude excluded all the files
from the directory (but not the directory), then the directory would
not be created.
This is also visible with `rclone tree` which uses the same tree
building approach as `rclone sync --fast-list` where the directories
would go missing from the tree view.
This was caused by not adding the parents of excluded files to the
directory tree.
See: https://forum.rclone.org/t/create-empty-src-dirs-issue-with-b2/30856
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Cloudflare R2 doesn't support range options like `Range: bytes=21-`.
This patch makes FixRangeOption turn a SeekOption into an absolute
RangeOption like this `Range: bytes=21-25` to interoperate with R2.
See: #5642
Before this change FixRangeOption was leaving `Range: bytes=21-`
alone, thus not fulfilling its contract of making Range requests
absolute.
As it happens this form isn't supported by Cloudflare R2.
After this change the request is normalised to `Range: bytes=21-25`.
See: #5642
Similar to fs.Duration but parses into a timestamp instead
Supports parsing from:
* Any of the date formats in parseTimeDates
* A time.Duration offset from now
* parseDurationSuffixes offset from now
When this code was originally implemented os.UserCacheDir wasn't
public so this used a copy of the code. This commit replaces that now
out of date copy with a call to the now public stdlib function.
golang.org/x/crypto/ssh/terminal is deprecated in favor of
golang.org/x/term, see https://pkg.go.dev/golang.org/x/crypto/ssh/terminal
The latter also supports ReadPassword on solaris, so enable the
respective functionality in fs/config for solaris as well.
Before this change if the timezone was omitted in a
--min-age/--max-age time specifier then rclone defaulted to a UTC
timezone.
This is documented as using the local timezone if the time zone
specifier is omitted which is a much more useful default and this
patch corrects the implementation to agree with the documentation.
See: https://forum.rclone.org/t/problem-utc-windows-europe-1-summer-problem/29917
There has been a desire from more advanced rclone users to have regexp
filtering as well as the glob filtering.
This patch adds regexp filtering using this syntax `{{ regexp }}`
which is currently a syntax error, so is backwards compatibile.
This means regexps can be used everywhere globs can be used, and that
they also can be mixed with globs in the same pattern, eg `*.{{jpe?g}}`
Before this change, if the --max-duration limit was reached then
rclone would retry the sync as a fatal error wasn't raised.
This checks the deadline and raises a fatal error if necessary at the
end of the sync.
Fixes#6002
This allows a backend to have multiple aliases. These aliases are
hidden from `rclone config` and the command line flags are hidden from
the user. However the flags, environment varialbes and config for the
alias will work just fine.
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Previously an empty input (just pressing enter) was only allowed for multiple-choice
options that did not have the Exclusive property set. With this change the existing
Required property is introduced into the multiple choice handling, so that one can have
Exclusive and Required options where only a value from the list is allowed, and one can
have Exclusive but not Required options where an empty value is accepted but any
non-empty value must still be matching an item from the list.
Fixes#5549
See #5551
This patch adds rclone_http_status_code counter vector labeled by
* host,
* method,
* code.
It allows to see HTTP errors, backoffs etc.
The Metrics struct is designed for extensibility.
Adding new metrics is a matter of adding them to Metrics struct and including them in the response handling.
This feature has been discussed in the forum [1].
[1] https://forum.rclone.org/t/prometheus-metrics/14484
Whenever transfer.Account() is called, a new goroutine acc.averageLoop()
is started. This goroutine exits only when the channel acc.exit is closed.
acc.exit is closed when acc.Done() is called, which happens during tr.Done().
However, if tr.Reset is called during a copy low level retry, it replaces
the tr.acc, without calling acc.Done(), which results in the goroutine
mentioned above never exiting.
This commit calls acc.Done() during a tr.Reset()
This was necessary because go1.14 seems to have a modules related bug
which means it tries to build modules even though the uses of them are
all disabled with build constraints. This seems to be fixed in go1.15.
Previously only the fs being checked on gets passed to
GetModifyWindow(). However, in most tests, the test files are
generated in the local fs and transferred to the remote fs. So the
local fs time precision has to be taken into account.
This meant that on Windows the time tests failed because the
local fs has a time precision of 100ns. Checking remote items uploaded
from local fs on Windows also requires a modify window of 100ns.
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
The test is not applicable to uptobox which can't upload empty files.
The test was not skipped as intended because the direct error was compared.
This fix will compare error Cause because Sync wraps the error.
This was caused by
7a1cab57b6 cmd/hashsum: dont put ERROR or UNSUPPORTED in output
And was picked up in the integration tests.
This patch no longer calls the HashLister for unsupported hash types.
This changes the interface to NewObject so that if NewObject is called
on a directory then it should return fs.ErrorIsDir if possible without
doing any extra work, otherwise fs.ErrorObjectNotFound.
Tested on integration test server with:
go run integration-test.go -tests backend -run TestIntegration/FsMkdir/FsPutFiles/FsNewObjectDir -branch fix-stat -maxtries 1
Google Drive API allows for clauses like "modifiedTime > '2012-06-04T12:00:00'"
in the query param, so the filter flags --max-age and --min-age can be applied
directly at the directory listing phase rather than in a filter.
This is extremely helpful when we want to do an incremental backup of a remote
drive with many files but the number of recently changed file is small.
Co-authored-by: fotile96 <fotile96@users.noreply.github.com>
This patch will:
- add --daemon-wait flag to control the time to wait for background mount
- remove dependency on sevlyar/go-daemon and implement backgrounding directly
- avoid setsid during backgrounding as it can result in race under Automount
- provide a fallback PATH to correctly run `fusermount` under systemd as it
runs mount units without standard environment variables
- correctly handle ^C pressed while background process is being setting up
This replaces built-in os.MkdirAll with a patched version that stops the recursion
when reaching the volume part of the path. The original version would continue recursion,
and for extended length paths end up with \\? as the top-level directory, and the error
message would then be something like:
mkdir \\?: The filename, directory name, or volume label syntax is incorrect.
Before this fix, on Windows, the --bwlimit would max out at 2.5Gbps
even when set to 10 Gbps.
This turned out to be because of the maximum token bucket size.
This fix scales up the token bucket size linearly above a bwlimit of
2Gbps.
Fixes#5507
Before this fix, saving a :backend config gave the error
Can't save config "token" = "XXX" for on the fly backend ":backend"
Even when using the in-memory config `--config ""`
This fixes the problem by
- always using the in memory config if it is configured
- moving the check for a :backend config save to the file config backend
It also removes the contents of the config items being saved from the
log which saves confidential tokens being logged.
Fixes#5451
