Before this change, rclone would always check the root to see if it
was an object.
This change doesn't check to see if the root is an object if the path
ends with a /
This avoids a transaction where rclone HEADs the path to see if it
exists.
See #4990
macOS stores files in NFD form and transferring them like this to some
systems causes the Korean language to display incorrectly.
This adds the flag --local-unicode-normalization to optionally
normalize the file names to NFC.
This also removes the (long deprecated) --local-no-unicode-normalization flag
See: https://forum.rclone.org/t/support-for-korean-jaso-conversion/19435
This is a very large change which turns the post Config function in
backends into a state based call and response system so that
alternative user interfaces can be added.
The existing config logic has been converted, but it is quite
complicated and folloup commits will likely be needed to fix it!
Follow up commits will add a command line and API based way of using
this configuration system.
It was discovered on some Android systems, the stat size of a symlink
is different to the size that readlink returns.
This was giving errors like this
transport connection broken: http: ContentLength=30 with Body length 28
There are enough exceptions to the size of readlink being different to
the size of stat that this patch now always does readlink to work out
the size of a symlink.
Since symlinks are relatively uncommon this shouldn't affect
performance too much and will mean that the size is always correct.
This deprecates the --local-zero-size-links flag which is now
effectively always enabled.
See: https://forum.rclone.org/t/problem-with-symlinks-and-links/23840/
Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M.
Extends binary suffix output with letter i, e.g. Ki and Mi.
Centralizes creation of bit/byte unit strings.
v1.4.6 of uplink allows us to do a negative offset from the end of the
file. This removes a round trip when requesting the last N bytes of a
file.
Previous to v1.4.6 of uplink it wasn't possible to do a negative offset
on download. This meant that to fulfill the semantics of http range
headers it was necessary to first fetch the size of the object via a
stat call and compute absolute offset and length.
Restructuring of config code in v1.55 resulted in config
file being loaded early at process startup. If configuration
file is encrypted this means user will need to supply the password,
even when running commands that does not use config.
This also lead to an issue where mount with --deamon failed to
decrypt the config file when it had to prompt user for passord.
Fixes#5236Fixes#5228
Including the bucket name as part of the `fileNamePrefix` passed to
`b2_get_download_authorization` results in a link valid for objects that
have the bucket name as part of the object path; e.g.,
rclone link :b2:some-bucket/some-file
would result in a public link valid for the object
`some-bucket/some-file` in the `some-bucket` bucket (in rclone-remote
parlance, `:b2:some-bucket/some-bucket/some-file`). This will almost
certainly result in a broken link.
The B2 docs don't explicitly specify this behavior, but the example
given for `fileNamePrefix` provides some clarification.
See https://www.backblaze.com/b2/docs/b2_get_download_authorization.html.
This code removes the code added in
15d19131bd s3: use aws web identity role provider
This code no longer works because it doesn't initialise the
tokenFetcher - leading to a nil pointer crash.
The proper way to initialise this is with the
NewWebIdentityCredentials but it isn't clear where to get the other
parameters: roleARN, roleSessionName, path.
In the linked issue a user reports rclone working with EKS anyway, so
perhaps this code is no longer needed.
If it is needed, hopefully someone who knows AWS better will come
along and fix it!
See: https://forum.rclone.org/t/add-support-for-aws-sso/23569
Betweeen rclone v1.54 and v1.55 there was an approx 3x performance
regression when transferring to distant SFTP servers (in particular
rsync.net).
This turned out to be due to the library github.com/pkg/sftp rclone
uses. Concurrent writes used to be enabled in this library by default
(for v1.12.0 as used in rclone v1.54) but they are no longer enabled
(for v1.13.0 as used in rclone v1.55) for safety reasons and it is
necessary to enable them specifically.
The safety concerns are due to the uncertainty as to whether writes
come in order and whether a half completed file might have holes in
it. This isn't a problem for rclone since a) it doesn't restart
uploads and b) it has a post-transfer checksum test.
This change introduces a new flag `--sftp-disable-concurrent-writes`
to control the feature which defaults to false, meaning that
concurrent writes are enabled as in v1.54.
However this isn't quite enough to fix the problem as the sftp library
needs to be able to sniff the size of the stream from the reader
passed in, so this also adds a `Size` interface to the reader to
enable this. This involved a patch to the library.
The library was reverted to v1.12.0 for v1.55.1 - this patch installs
v1.13.0+master to fix the Size interface problem.
See: https://github.com/pkg/sftp/issues/426
Before this change, rclone checked to see if an object existed before
doing an upload by listing the destination directory. This was very
inefficient, especially with large directories.
After this change rclone uses the pre upload check API call which
checks to see if it is OK to upload an object, and also returns the ID
of an existing object which saves rclone having to do a directory
listing.
OneDrive randomly returns the error message: "InvalidAuthenticationToken: Unable to initialize RPS". These unexpected errors typically caused the entire rclone command to fail.
This work around recognizes these errors and marks them for a low level retry, that mostly succeeds. This will make rclone commands complete without being noticeable affected.
Fixes: #5270
With the file version format standardized in lib/version, `crypt` can
now treat the version strings separately from the encrypted/decrypted
file names. This allows --b2-versions to work with `crypt`.
Fixes#1627
Co-authored-by: Luc Ritchie <luc.ritchie@gmail.com>
Before this change rclone would auth over https even when the server
was configured with http.
Authing over http obviously isn't ideal, however this type of server
is on-premise and doesn't work over https.
PR #4266 modified ftpConnection to make ftp library into using
a custom dial function which is QoS aware and takes care of TLS.
However the ServerConn.Login function from the ftp library also needs
TLS config passed explicitly as a trigger for sending PSBZ and PROT
options to FTP server. This was not taken care of resulting in
failure to connect via FTP with implicit TLS.
This PR fixes that.
Fixes#5210
In
a3fcadddc8 sftp: close idle connections after --sftp-idle-timeout (1m by default)
Idle SFTP connections were closed after 1 minute. However due to the
way SSH multiplexes connections over a single SSH connection this
meant that if uploads or downloads went on for more than one minute
they failed with "EOF errors" as their underlying connection was
closed.
This fixes the problem by not clearing idle connections if there are
any transfers in progress.
Fixes#5197
This reverts the library update done in this commit.
713f8f357d sftp: fix "file not found" errors for read once servers
Reverting this commit triples the performance to a far away sftp server.
See: https://github.com/pkg/sftp/issues/426
Before this change when the context was cancelled (due to
--max-duration for example) this could deadlock when uploading
multipart uploads.
This change fixes the problem by introducing another go routine to
monitor the context and close the pipe with an error when the context
errors.
When reading files from B2 via cloudflare using --b2-download-url
cloudflare strips the Content-Length headers (presumably so it can
inject stuff into the body).
This caused rclone to think the file was corrupted as the length
didn't match.
The patch uses the old length read from the listing if there is no
Content-Length.
See: https://forum.rclone.org/t/b2-cloudflare-error-directory-not-found/23026
This commit broke the initialisation of the union backend
f17d7c0012 union: refactor to use fspath.SplitFs instead of fs.ParseRemote #4996
This patch fixes it.
Box recently changed their API, changing the case of returned API items
> On May 10th, 2021, as part of our continued infrastructure upgrade,
> Box's API response headers will standardize to return in a case
> insensitive manner, in line with industry best practices and our API
> documentation. Applications that are using these headers, such as
> "location" and "retry-after", will need to verify that their
> applications are checking for these headers in a case-insensitive
> fashion.
Rclone was reading the raw headers from the `http.Header` and not
using the `Get` accessor method which meant that it was sensitive to
case changes.
This fixes the problem by using the `Get` accessor method.
See: https://forum.rclone.org/t/box-backend-incompatible-with-box-api-changes-being-deployed/22972
