Before this change we released the ssh connection back to the pool
before the upload was finished.
This meant that uploads were re-using the same ssh connection which
reduces throughput.
This releases the ssh connection back to the pool only after the
upload has finished, or on error state.
See: https://forum.rclone.org/t/sftp-backend-opens-less-connection-than-expected/40245
smb2.File implements the WriterAtCloser interface defined in
fs/types.go. Expose it via a OpenWriterAt method on
the fs struct to support multi-threaded writes.
The error is:
Error: failed to configure token with jwt authentication: jwtutil: failed making auth request: 400 Bad Request
With the following additional debug information:
jwtutil: Response Body: {"error":"invalid_grant","error_description":"Please check the 'aud' claim. Should be a string"}
Problem is that in jwt-go the RegisteredClaims type has Audience field (aud claim) that
is a list, while box apparantly expects it to be a singular string. In jwt-go v4 we
currently use there is an alternative type StandardClaims which matches what box wants.
Unfortunately StandardClaims is marked as deprecated, and is removed in the
newer v5 version, so we this is a short term fix only.
Fixes#7114
Before this change the new partial downloads code was causing symlinks
to be copied as regular files.
This was because the partial isn't named .rclonelink so the local
backend saves it as a normal file and renaming it to .rclonelink
doesn't cause it to become a symlink.
This fixes the problem by not copying .rclonelink files using the
partials mechanism but reverting to the previous --inplace behaviour.
This could potentially be fixed better in the future by changing the
local backend Move to change files to and from symlinks depending on
their name. However this was deemed too complicated for a point
release.
This also adds a test in the local backend. This test should ideally
be in operations but it isn't easy to put it there as operations knows
nothing of symlinks.
Fixes#7101
See: https://forum.rclone.org/t/reggression-in-v1-63-0-links-drops-the-rclonelink-extension/39483
Before this change if a directory entry could be listed but not
lstat-ed then rclone would give an error and abort the directory
listing with the error
failed to read directory entry: failed to read directory "XXX": lstat XXX
This change makes sure that the directory listing carries on even
after this kind of error.
The sync will be failed but it will carry on.
This problem was caused by a programming error setting the err
variable in an outer scope when it should have been using a local err
variable.
See: https://forum.rclone.org/t/sync-aborts-if-even-one-single-unreadable-folder-is-encountered/39653
Before this change, if you mounted the root of the smb then it would
give an error on rclone about and periodically in the mount logs:
Statfs failed: bucket or container name is needed in remote
This fix makes the smb backend return empty usage in this case which
will stop the errors and show the default 1P of free space.
See: https://forum.rclone.org/t/error-statfs-failed-bucket-or-container-name-is-needed-in-remote/39631
This introduces a new fs.Option flag, Sensitive and uses this along
with IsPassword to redact the info in the config file for support
purposes.
It adds this flag into backends where appropriate. It was necessary to
add oauthutil.SharedOptions to some backends as they were missing
them.
Fixes#5209
Fix https://github.com/rclone/rclone/issues/7103
Before this change the RegExp validating the endpoint URL was a bit
too strict allowing only /dav/files/USER due to chunking limitations.
This patch adds back support for /dav/files/USER/dir/subdir etc.
Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>
This reverts commit 9065e921c1.
It turns out the problem for the failing fs/sync tests was the
policies being different for search and create which meant that the
file was being created in one union branch but a diferent one was
found in another branch.
The API seems to have changed and the `totalFileCount` item no longer
tracks the number of files in the directory so is useless for seeing
if the directory is empty.
This patch fixes the problem by seeing whether there are any files or
directories in the folder instead.
This problem was detected by the integration tests.
For some unknown reason the API sometimes returns the name already
exists on a server side copy.
{
"error_id": null,
"error_message": "Name already exist",
"error_type": "NAME_ALREADY_EXIST",
"error_uri": "http://api.put.io/v2/docs",
"extra": {},
"status": "ERROR",
"status_code": 400
}
This patch uploads to a temporary name then renames it which works
around the problem.
This was spotted by the integration tests.
The integration tests spotted that modification times are no longer
being preserved by the putio API in server side move and copy.
This patch explicitly sets the modtime after the server side move or
copy.
In this commit we enabled PartialUploads for the union backend.
3faa84b47c combine,compress,crypt,hasher,union: support wrapping backends with PartialUploads
This turns out to cause test failures in fs/sync so this commit
disables them again pending further investigation.
At some point the sharefile API changed to require the size of the
file in the initial transaction which makes the streaming upload fail
with this error:
upload failed: file size does not match (-2)
This was discovered by the integration tests.
In this commit we discovered a problem with objects being uploaded to
the incorrect object name. It added an integration test for the
problem.
65b2e378e0 drive: fix incorrect remote after Update on object
This test was tripped by the putio backend and this patch fixes the
problem.
Before this patch the Update method had a 50/50 chance of returning
the old object rather than the new updated object.
This was discovered in the integration tests.
This patch fixes the problem by deleting the duplicate object before
we look for the new object.
In this commit we discovered a problem with objects being uploaded to
the incorrect object name. It added an integration test for the
problem.
65b2e378e0 drive: fix incorrect remote after Update on object
This test was tripped by the Storj backend and this patch fixes the
problem.
Storj has a rate limit of 1 per second when uploading to the same
file.
This was being tripped by the integration tests.
This patch fixes it by detecting the error and sleeping for 1 second
before retrying.
See: https://github.com/storj/uplink/issues/149
Before this change a server side copy did not preserve the modtime.
This used to work on nextcloud but at some point it started ignoring
the `X-Oc-Mtime` header.
This patch sets the modtime explicitly after a server side copy if the
`X-Oc-Mtime` wasn't accepted.
This problem was discovered in the integration tests.
Before this change we were incorrectly identifying the root directory
of the listing and adding it into the listing.
This caused higher layers of rclone to emit the error above.
See #7038
Before this change we were incorrectly identifying the root directory
of the listing and adding it into the listing.
This caused higher layers of rclone to emit the error above.
See #7038
Before this change we were incorrectly identifying the root directory
of the listing and adding it into the listing.
This caused higher layers of rclone to emit the error above.
Fixes#7038
This commit
3567a47258 fs: make ConfigString properly reverse suffixed file systems
made fs.ConfigString() return the full config of the backend. Because
mount was using this to make a volume name it started to make volume
names with illegal characters in which couldn't be mounted by macOS.
This fixes the problem by making a separate fs.ConfigStringFull() and
using that where appropriate and leaving the original
fs.ConfigString() function untouched.
Fixes#7063
See: https://forum.rclone.org/t/1-63-beta-fails-to-mount-on-macos-with-on-the-fly-crypt-remote/39090
Zoho has started returning the results from Range: requests with a 200
response code rather than the technically correct 206 error code.
Before this change this triggered workaround code to deal with Zoho
not obeying Range: requests properly.
This fix tests the returned header for a Content-Range: header and if
it exists assumes it is a valid reply to the Range: request despite
the status being 200.
This problem was spotted by the integration tests.
Before this fix, if the upload failed for some reason the yandex
backend would attempt to retry itself it which would fail immediately
with 400 Bad Request.
Normally we retry uploads at a higher level so they can be done with
new data and this patch does that.
See #7044
Before this change the Errors type in the union backend produced
errors which could not be Unwrapped to test their type.
This adds the (go1.20) Unwrap method to the Errors type which allows
errors.Is to work on these errors.
It also adds unit tests for the Errors type and fixes a couple of
minor bugs thrown up in the process.
See: https://forum.rclone.org/t/failed-to-set-modification-time-1-error-pcloud-cant-set-modified-time/38596
Set this automatically for any backend which implements UnWrap and
manually for combine and union which can't implement UnWrap but do
overlay other backends.
