package vfs

// Help contains text describing file and directory caching to add to
// the command help.
var Help = `
### Directory Cache

Using the ` + "`--dir-cache-time`" + ` flag, you can set how long a
directory should be considered up to date and not refreshed from the
backend. Changes made locally in the mount may appear immediately or
invalidate the cache. However, changes done on the remote will only
be picked up once the cache expires if the backend configured does not
support polling for changes. If the backend supports polling, changes
will be picked up on within the polling interval.

Alternatively, you can send a ` + "`SIGHUP`" + ` signal to rclone for
it to flush all directory caches, regardless of how old they are.
Assuming only one rclone instance is running, you can reset the cache
like this:

    kill -SIGHUP $(pidof rclone)

If you configure rclone with a [remote control](/rc) then you can use
rclone rc to flush the whole directory cache:

    rclone rc vfs/forget

Or individual files or directories:

    rclone rc vfs/forget file=path/to/file dir=path/to/dir

### File Buffering

The ` + "`--buffer-size`" + ` flag determines the amount of memory,
that will be used to buffer data in advance.

Each open file descriptor will try to keep the specified amount of
data in memory at all times. The buffered data is bound to one file
descriptor and won't be shared between multiple open file descriptors
of the same file.

This flag is a upper limit for the used memory per file descriptor.
The buffer will only use memory for data that is downloaded but not
not yet read. If the buffer is empty, only a small amount of memory
will be used.
The maximum memory used by rclone for buffering can be up to
` + "`--buffer-size * open files`" + `.

### File Caching

These flags control the VFS file caching options.  The VFS layer is
used by rclone mount to make a cloud storage system work more like a
normal file system.

You'll need to enable VFS caching if you want, for example, to read
and write simultaneously to a file.  See below for more details.

Note that the VFS cache works in addition to the cache backend and you
may find that you need one or the other or both.

    --cache-dir string                   Directory rclone will use for caching.
    --vfs-cache-max-age duration         Max age of objects in the cache. (default 1h0m0s)
    --vfs-cache-mode string              Cache mode off|minimal|writes|full (default "off")
    --vfs-cache-poll-interval duration   Interval to poll the cache for stale objects. (default 1m0s)
    --vfs-cache-max-size int             Max total size of objects in the cache. (default off)

If run with ` + "`-vv`" + ` rclone will print the location of the file cache.  The
files are stored in the user cache file area which is OS dependent but
can be controlled with ` + "`--cache-dir`" + ` or setting the appropriate
environment variable.

The cache has 4 different modes selected by ` + "`--vfs-cache-mode`" + `.
The higher the cache mode the more compatible rclone becomes at the
cost of using disk space.

Note that files are written back to the remote only when they are
closed so if rclone is quit or dies with open files then these won't
get written back to the remote.  However they will still be in the on
disk cache.

If using --vfs-cache-max-size note that the cache may exceed this size
for two reasons.  Firstly because it is only checked every
--vfs-cache-poll-interval.  Secondly because open files cannot be
evicted from the cache.

#### --vfs-cache-mode off

In this mode the cache will read directly from the remote and write
directly to the remote without caching anything on disk.

This will mean some operations are not possible

  * Files can't be opened for both read AND write
  * Files opened for write can't be seeked
  * Existing files opened for write must have O_TRUNC set
  * Files open for read with O_TRUNC will be opened write only
  * Files open for write only will behave as if O_TRUNC was supplied
  * Open modes O_APPEND, O_TRUNC are ignored
  * If an upload fails it can't be retried

#### --vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disks.  This means that files opened for
write will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

  * Files opened for write only can't be seeked
  * Existing files opened for write must have O_TRUNC set
  * Files opened for write only will ignore O_APPEND, O_TRUNC
  * If an upload fails it can't be retried

#### --vfs-cache-mode writes

In this mode files opened for read only are still read directly from
the remote, write only and read/write files are buffered to disk
first.

This mode should support all normal file system operations.

If an upload fails it will be retried up to --low-level-retries times.

#### --vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk.  When
a file is opened for read it will be downloaded in its entirety first.

This may be appropriate for your needs, or you may prefer to look at
the cache backend which does a much more sophisticated job of caching,
including caching directory hierarchies and chunks of files.

In this mode, unlike the others, when a file is written to the disk,
it will be kept on the disk after it is written to the remote.  It
will be purged on a schedule according to ` + "`--vfs-cache-max-age`" + `.

This mode should support all normal file system operations.

If an upload or download fails it will be retried up to
--low-level-retries times.

### Case Sensitivity

Linux file systems are case-sensitive: two files can differ only
by case, and the exact case must be used when opening a file.

Windows is not like most other operating systems supported by rclone.
File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case used
to create the file is preserved and available for programs to query.
It is not allowed for two files in the same directory to differ only by case.

Usually file systems on macOS are case-insensitive. It is possible to make macOS
file systems case-sensitive but that is not the default

The "--vfs-case-insensitive" mount flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the mounted
file system as is. If the flag is "true" (or appears without a value on
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on mounted file system. If an argument refers
to an existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the same
name is not found but a name differing only by case exists, rclone will
transparently fixup the name. This fixup happens only when an existing file
is requested. Case sensitivity of file names created anew by rclone is
controlled by an underlying mounted file system.

Note that case sensitivity of the operating system running rclone (the target)
may differ from case sensitivity of a file system mounted by rclone (the source).
The flag controls whether "fixup" is performed to satisfy the target.

If the flag is not provided on command line, then its default value depends
on the operating system where rclone runs: "true" on Windows and macOS, "false"
otherwise. If the flag is provided without a value, then it is "true".
`