--- date: 2018-06-16T18:20:28+01:00 title: "rclone config" slug: rclone_config url: /commands/rclone_config/ --- ## rclone config Enter an interactive configuration session. ### Synopsis Enter an interactive configuration session where you can setup new remotes and manage existing ones. You may also set or remove a password to protect your configuration. ``` rclone config [flags] ``` ### Options ``` -h, --help help for config ``` ### Options inherited from parent commands ``` --acd-templink-threshold int Files >= this size will be downloaded via their tempLink. (default 9G) --acd-upload-wait-per-gb duration Additional time per GB to wait after a failed complete upload to see if it appears. (default 3m0s) --ask-password Allow prompt for password for encrypted configuration. (default true) --auto-confirm If enabled, do not request console confirmation. --azureblob-chunk-size int Upload chunk size. Must fit in memory. (default 4M) --azureblob-upload-cutoff int Cutoff for switching to chunked upload (default 256M) --b2-chunk-size int Upload chunk size. Must fit in memory. (default 96M) --b2-hard-delete Permanently delete files on remote removal, otherwise hide files. --b2-test-mode string A flag string for X-Bz-Test-Mode header. --b2-upload-cutoff int Cutoff for switching to chunked upload (default 190.735M) --b2-versions Include old versions in directory listings. --backup-dir string Make backups into hierarchy based in DIR. --bind string Local address to bind to for outgoing connections, IPv4, IPv6 or name. --box-upload-cutoff int Cutoff for switching to multipart upload (default 50M) --buffer-size int Buffer size when copying files. (default 16M) --bwlimit BwTimetable Bandwidth limit in kBytes/s, or use suffix b|k|M|G or a full timetable. --cache-chunk-clean-interval string Interval at which chunk cleanup runs (default "1m") --cache-chunk-no-memory Disable the in-memory cache for storing chunks during streaming --cache-chunk-path string Directory to cached chunk files (default "/home/ncw/.cache/rclone/cache-backend") --cache-chunk-size string The size of a chunk (default "5M") --cache-db-path string Directory to cache DB (default "/home/ncw/.cache/rclone/cache-backend") --cache-db-purge Purge the cache DB before --cache-db-wait-time duration How long to wait for the DB to be available - 0 is unlimited (default 1s) --cache-dir string Directory rclone will use for caching. (default "/home/ncw/.cache/rclone") --cache-info-age string How much time should object info be stored in cache (default "6h") --cache-read-retries int How many times to retry a read from a cache storage (default 10) --cache-rps int Limits the number of requests per second to the source FS. -1 disables the rate limiter (default -1) --cache-tmp-upload-path string Directory to keep temporary files until they are uploaded to the cloud storage --cache-tmp-wait-time string How long should files be stored in local cache before being uploaded (default "15m") --cache-total-chunk-size string The total size which the chunks can take up from the disk (default "10G") --cache-workers int How many workers should run in parallel to download chunks (default 4) --cache-writes Will cache file data on writes through the FS --checkers int Number of checkers to run in parallel. (default 8) -c, --checksum Skip based on checksum & size, not mod-time & size --config string Config file. (default "/home/ncw/.rclone.conf") --contimeout duration Connect timeout (default 1m0s) -L, --copy-links Follow symlinks and copy the pointed to item. --cpuprofile string Write cpu profile to file --crypt-show-mapping For all files listed show how the names encrypt. --delete-after When synchronizing, delete files on destination after transfering --delete-before When synchronizing, delete files on destination before transfering --delete-during When synchronizing, delete files during transfer (default) --delete-excluded Delete files on dest excluded from sync --disable string Disable a comma separated list of features. Use help to see a list. --drive-acknowledge-abuse Set to allow files which return cannotDownloadAbusiveFile to be downloaded. --drive-alternate-export Use alternate export URLs for google documents export. --drive-auth-owner-only Only consider files owned by the authenticated user. --drive-chunk-size int Upload chunk size. Must a power of 2 >= 256k. (default 8M) --drive-formats string Comma separated list of preferred formats for downloading Google docs. (default "docx,xlsx,pptx,svg") --drive-impersonate string Impersonate this user when using a service account. --drive-list-chunk int Size of listing chunk 100-1000. 0 to disable. (default 1000) --drive-shared-with-me Only show files that are shared with me --drive-skip-gdocs Skip google documents in all listings. --drive-trashed-only Only show files that are in the trash --drive-upload-cutoff int Cutoff for switching to chunked upload (default 8M) --drive-use-created-date Use created date instead of modified date. --drive-use-trash Send files to the trash instead of deleting permanently. (default true) --dropbox-chunk-size int Upload chunk size. Max 150M. (default 48M) -n, --dry-run Do a trial run with no permanent changes --dump string List of items to dump from: headers,bodies,requests,responses,auth,filters,goroutines,openfiles --dump-bodies Dump HTTP headers and bodies - may contain sensitive info --dump-headers Dump HTTP bodies - may contain sensitive info --exclude stringArray Exclude files matching pattern --exclude-from stringArray Read exclude patterns from file --exclude-if-present string Exclude directories if filename is present --fast-list Use recursive list if available. Uses more memory but fewer transactions. --files-from stringArray Read list of source-file names from file -f, --filter stringArray Add a file-filtering rule --filter-from stringArray Read filtering patterns from a file --gcs-location string Default location for buckets (us|eu|asia|us-central1|us-east1|us-east4|us-west1|asia-east1|asia-noetheast1|asia-southeast1|australia-southeast1|europe-west1|europe-west2). --gcs-storage-class string Default storage class for buckets (MULTI_REGIONAL|REGIONAL|STANDARD|NEARLINE|COLDLINE|DURABLE_REDUCED_AVAILABILITY). --ignore-checksum Skip post copy check of checksums. --ignore-errors delete even if there are I/O errors --ignore-existing Skip all files that exist on destination --ignore-size Ignore size when skipping use mod-time or checksum. -I, --ignore-times Don't skip files that match size and time - transfer all files --immutable Do not modify files. Fail if existing files have been modified. --include stringArray Include files matching pattern --include-from stringArray Read include patterns from file --local-no-check-updated Don't check to see if the files change during upload --local-no-unicode-normalization Don't apply unicode normalization to paths and filenames --log-file string Log everything to this file --log-level string Log level DEBUG|INFO|NOTICE|ERROR (default "NOTICE") --low-level-retries int Number of low level retries to do. (default 10) --max-age duration Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off) --max-delete int When synchronizing, limit the number of deletes (default -1) --max-depth int If set limits the recursion depth to this. (default -1) --max-size int Only transfer files smaller than this in k or suffix b|k|M|G (default off) --max-transfer int Maximum size of data to transfer. (default off) --mega-debug If set then output more debug from mega. --memprofile string Write memory profile to file --min-age duration Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off) --min-size int Only transfer files bigger than this in k or suffix b|k|M|G (default off) --modify-window duration Max time diff to be considered the same (default 1ns) --no-check-certificate Do not verify the server SSL certificate. Insecure. --no-gzip-encoding Don't set Accept-Encoding: gzip. --no-traverse Obsolete - does nothing. --no-update-modtime Don't update destination mod-time if files identical. -x, --one-file-system Don't cross filesystem boundaries. --onedrive-chunk-size int Above this size files will be chunked - must be multiple of 320k. (default 10M) -q, --quiet Print as little stuff as possible --rc Enable the remote control server. --rc-addr string IPaddress:Port or :Port to bind server to. (default "localhost:5572") --rc-cert string SSL PEM key (concatenation of certificate and CA certificate) --rc-client-ca string Client certificate authority to verify clients with --rc-htpasswd string htpasswd file - if not provided no authentication is done --rc-key string SSL PEM Private key --rc-max-header-bytes int Maximum size of request header (default 4096) --rc-pass string Password for authentication. --rc-realm string realm for authentication (default "rclone") --rc-server-read-timeout duration Timeout for server reading data (default 1h0m0s) --rc-server-write-timeout duration Timeout for server writing data (default 1h0m0s) --rc-user string User name for authentication. --retries int Retry operations this many times if they fail (default 3) --retries-sleep duration Interval between retrying operations if they fail, e.g 500ms, 60s, 5m. (0 to disable) --s3-acl string Canned ACL used when creating buckets and/or storing objects in S3 --s3-chunk-size int Chunk size to use for uploading (default 5M) --s3-disable-checksum Don't store MD5 checksum with object metadata --s3-storage-class string Storage class to use when uploading S3 objects (STANDARD|REDUCED_REDUNDANCY|STANDARD_IA|ONEZONE_IA) --s3-upload-concurrency int Concurrency for multipart uploads (default 2) --sftp-ask-password Allow asking for SFTP password when needed. --size-only Skip based on size only, not mod-time or checksum --skip-links Don't warn about skipped symlinks. --ssh-path-override string Override path used by SSH connection. --stats duration Interval between printing stats, e.g 500ms, 60s, 5m. (0 to disable) (default 1m0s) --stats-file-name-length int Max file name length in stats. 0 for no limit (default 40) --stats-log-level string Log level to show --stats output DEBUG|INFO|NOTICE|ERROR (default "INFO") --stats-unit string Show data rate in stats as either 'bits' or 'bytes'/s (default "bytes") --streaming-upload-cutoff int Cutoff for switching to chunked upload if file size is unknown. Upload starts after reaching cutoff or when file ends. (default 100k) --suffix string Suffix for use with --backup-dir. --swift-chunk-size int Above this size files will be chunked into a _segments container. (default 5G) --syslog Use Syslog for logging --syslog-facility string Facility for syslog, eg KERN,USER,... (default "DAEMON") --timeout duration IO idle timeout (default 5m0s) --tpslimit float Limit HTTP transactions per second to this. --tpslimit-burst int Max burst of transactions for --tpslimit. (default 1) --track-renames When synchronizing, track file renames and do a server side move if possible --transfers int Number of file transfers to run in parallel. (default 4) -u, --update Skip files that are newer on the destination. --use-server-modtime Use server modified time instead of object metadata --user-agent string Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.42") -v, --verbose count Print lots more stuff (repeat for more) ``` ### SEE ALSO * [rclone](/commands/rclone/) - Sync files and directories to and from local and remote object stores - v1.42 * [rclone config create](/commands/rclone_config_create/) - Create a new remote with name, type and options. * [rclone config delete](/commands/rclone_config_delete/) - Delete an existing remote . * [rclone config dump](/commands/rclone_config_dump/) - Dump the config file as JSON. * [rclone config edit](/commands/rclone_config_edit/) - Enter an interactive configuration session. * [rclone config file](/commands/rclone_config_file/) - Show path of configuration file in use. * [rclone config password](/commands/rclone_config_password/) - Update password in an existing remote. * [rclone config providers](/commands/rclone_config_providers/) - List in JSON format all the providers and options. * [rclone config show](/commands/rclone_config_show/) - Print (decrypted) config file, or the config for a single remote. * [rclone config update](/commands/rclone_config_update/) - Update options in an existing remote. ###### Auto generated by spf13/cobra on 16-Jun-2018