--- date: 2020-05-25T12:06:00+01:00 title: "rclone serve http" description: "Serve the remote over HTTP." slug: rclone_serve_http url: /commands/rclone_serve_http/ # autogenerated - DO NOT EDIT, instead edit the source code in cmd/serve/http/ and as part of making a release run "make commanddocs" --- # rclone serve http Serve the remote over HTTP. ## Synopsis rclone serve http implements a basic web server to serve the remote over HTTP. This can be viewed in a web browser or you can make a remote of type http read from it. You can use the filter flags (eg --include, --exclude) to control what is served. The server will log errors. Use -v to see access logs. --bwlimit will be respected for file transfers. Use --stats to control the stats printing. ## Server options Use --addr to specify which IP address and port the server should listen on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By default it only listens on localhost. You can use port :0 to let the OS choose an available port. If you set --addr to listen on a public or LAN accessible IP address then using Authentication is advised - see the next section for info. --server-read-timeout and --server-write-timeout can be used to control the timeouts on the server. Note that this is the total time for a transfer. --max-header-bytes controls the maximum number of bytes the server will accept in the HTTP header. --baseurl controls the URL prefix that rclone serves from. By default rclone will serve from the root. If you used --baseurl "/rclone" then rclone would serve from a URL starting with "/rclone/". This is useful if you wish to proxy rclone serve. Rclone automatically inserts leading and trailing "/" on --baseurl, so --baseurl "rclone", --baseurl "/rclone" and --baseurl "/rclone/" are all treated identically. --template allows a user to specify a custom markup template for http and webdav serve functions. The server exports the following markup to be used within the template to server pages: | Parameter | Description | | :---------- | :---------- | | .Name | The full path of a file/directory. | | .Title | Directory listing of .Name | | .Sort | The current sort used. This is changeable via ?sort= parameter | | | Sort Options: namedirfist,name,size,time (default namedirfirst) | | .Order | The current ordering used. This is changeable via ?order= parameter | | | Order Options: asc,desc (default asc) | | .Query | Currently unused. | | .Breadcrumb | Allows for creating a relative navigation | |-- .Link | The relative to the root link of the Text. | |-- .Text | The Name of the directory. | | .Entries | Information about a specific file/directory. | |-- .URL | The 'url' of an entry. | |-- .Leaf | Currently same as 'URL' but intended to be 'just' the name. | |-- .IsDir | Boolean for if an entry is a directory or not. | |-- .Size | Size in Bytes of the entry. | |-- .ModTime | The UTC timestamp of an entry. | ### Authentication By default this will serve files without needing a login. You can either use an htpasswd file which can take lots of users, or set a single username and password with the --user and --pass flags. Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in standard apache format and supports MD5, SHA1 and BCrypt for basic authentication. Bcrypt is recommended. To create an htpasswd file: touch htpasswd htpasswd -B htpasswd user htpasswd -B htpasswd anotherUser The password file can be updated while rclone is running. Use --realm to set the authentication realm. ### SSL/TLS By default this will serve over http. If you want you can serve over https. You will need to supply the --cert and --key flags. If you wish to do client side certificate validation then you will need to supply --client-ca also. --cert should be either a PEM encoded certificate or a concatenation of that with the CA certificate. --key should be the PEM encoded private key and --client-ca should be the PEM encoded client certificate authority certificate. ## Directory Cache Using the `--dir-cache-time` flag, you can set how long a directory should be considered up to date and not refreshed from the backend. Changes made locally in the mount may appear immediately or invalidate the cache. However, changes done on the remote will only be picked up once the cache expires if the backend configured does not support polling for changes. If the backend supports polling, changes will be picked up on within the polling interval. Alternatively, you can send a `SIGHUP` signal to rclone for it to flush all directory caches, regardless of how old they are. Assuming only one rclone instance is running, you can reset the cache like this: kill -SIGHUP $(pidof rclone) If you configure rclone with a [remote control](/rc) then you can use rclone rc to flush the whole directory cache: rclone rc vfs/forget Or individual files or directories: rclone rc vfs/forget file=path/to/file dir=path/to/dir ## File Buffering The `--buffer-size` flag determines the amount of memory, that will be used to buffer data in advance. Each open file descriptor will try to keep the specified amount of data in memory at all times. The buffered data is bound to one file descriptor and won't be shared between multiple open file descriptors of the same file. This flag is a upper limit for the used memory per file descriptor. The buffer will only use memory for data that is downloaded but not not yet read. If the buffer is empty, only a small amount of memory will be used. The maximum memory used by rclone for buffering can be up to `--buffer-size * open files`. ## File Caching These flags control the VFS file caching options. The VFS layer is used by rclone mount to make a cloud storage system work more like a normal file system. You'll need to enable VFS caching if you want, for example, to read and write simultaneously to a file. See below for more details. Note that the VFS cache works in addition to the cache backend and you may find that you need one or the other or both. --cache-dir string Directory rclone will use for caching. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-cache-max-size int Max total size of objects in the cache. (default off) If run with `-vv` rclone will print the location of the file cache. The files are stored in the user cache file area which is OS dependent but can be controlled with `--cache-dir` or setting the appropriate environment variable. The cache has 4 different modes selected by `--vfs-cache-mode`. The higher the cache mode the more compatible rclone becomes at the cost of using disk space. Note that files are written back to the remote only when they are closed so if rclone is quit or dies with open files then these won't get written back to the remote. However they will still be in the on disk cache. If using --vfs-cache-max-size note that the cache may exceed this size for two reasons. Firstly because it is only checked every --vfs-cache-poll-interval. Secondly because open files cannot be evicted from the cache. ### --vfs-cache-mode off In this mode the cache will read directly from the remote and write directly to the remote without caching anything on disk. This will mean some operations are not possible * Files can't be opened for both read AND write * Files opened for write can't be seeked * Existing files opened for write must have O_TRUNC set * Files open for read with O_TRUNC will be opened write only * Files open for write only will behave as if O_TRUNC was supplied * Open modes O_APPEND, O_TRUNC are ignored * If an upload fails it can't be retried ### --vfs-cache-mode minimal This is very similar to "off" except that files opened for read AND write will be buffered to disks. This means that files opened for write will be a lot more compatible, but uses the minimal disk space. These operations are not possible * Files opened for write only can't be seeked * Existing files opened for write must have O_TRUNC set * Files opened for write only will ignore O_APPEND, O_TRUNC * If an upload fails it can't be retried ### --vfs-cache-mode writes In this mode files opened for read only are still read directly from the remote, write only and read/write files are buffered to disk first. This mode should support all normal file system operations. If an upload fails it will be retried up to --low-level-retries times. ### --vfs-cache-mode full In this mode all reads and writes are buffered to and from disk. When a file is opened for read it will be downloaded in its entirety first. This may be appropriate for your needs, or you may prefer to look at the cache backend which does a much more sophisticated job of caching, including caching directory hierarchies and chunks of files. In this mode, unlike the others, when a file is written to the disk, it will be kept on the disk after it is written to the remote. It will be purged on a schedule according to `--vfs-cache-max-age`. This mode should support all normal file system operations. If an upload or download fails it will be retried up to --low-level-retries times. ## Case Sensitivity Linux file systems are case-sensitive: two files can differ only by case, and the exact case must be used when opening a file. Windows is not like most other operating systems supported by rclone. File systems in modern Windows are case-insensitive but case-preserving: although existing files can be opened using any case, the exact case used to create the file is preserved and available for programs to query. It is not allowed for two files in the same directory to differ only by case. Usually file systems on macOS are case-insensitive. It is possible to make macOS file systems case-sensitive but that is not the default The "--vfs-case-insensitive" mount flag controls how rclone handles these two cases. If its value is "false", rclone passes file names to the mounted file system as is. If the flag is "true" (or appears without a value on command line), rclone may perform a "fixup" as explained below. The user may specify a file name to open/delete/rename/etc with a case different than what is stored on mounted file system. If an argument refers to an existing file with exactly the same name, then the case of the existing file on the disk will be used. However, if a file name with exactly the same name is not found but a name differing only by case exists, rclone will transparently fixup the name. This fixup happens only when an existing file is requested. Case sensitivity of file names created anew by rclone is controlled by an underlying mounted file system. Note that case sensitivity of the operating system running rclone (the target) may differ from case sensitivity of a file system mounted by rclone (the source). The flag controls whether "fixup" is performed to satisfy the target. If the flag is not provided on command line, then its default value depends on the operating system where rclone runs: "true" on Windows and macOS, "false" otherwise. If the flag is provided without a value, then it is "true". ``` rclone serve http remote:path [flags] ``` ## Options ``` --addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080") --baseurl string Prefix for URLs - leave blank for root. --cert string SSL PEM key (concatenation of certificate and CA certificate) --client-ca string Client certificate authority to verify clients with --dir-cache-time duration Time to cache directory entries for. (default 5m0s) --dir-perms FileMode Directory permissions (default 0777) --file-perms FileMode File permissions (default 0666) --gid uint32 Override the gid field set by the filesystem. (default 1000) -h, --help help for http --htpasswd string htpasswd file - if not provided no authentication is done --key string SSL PEM Private key --max-header-bytes int Maximum size of request header (default 4096) --no-checksum Don't compare checksums on up/download. --no-modtime Don't read/write the modification time (can speed things up). --no-seek Don't allow seeking in files. --pass string Password for authentication. --poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s) --read-only Mount read-only. --realm string realm for authentication (default "rclone") --server-read-timeout duration Timeout for server reading data (default 1h0m0s) --server-write-timeout duration Timeout for server writing data (default 1h0m0s) --template string User Specified Template. --uid uint32 Override the uid field set by the filesystem. (default 1000) --umask int Override the permission bits set by the filesystem. (default 2) --user string User name for authentication. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-max-size SizeSuffix Max total size of objects in the cache. (default off) --vfs-cache-mode CacheMode Cache mode off|minimal|writes|full (default off) --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-case-insensitive If a file name not found, find a case insensitive match. --vfs-read-chunk-size SizeSuffix Read the source objects in chunks. (default 128M) --vfs-read-chunk-size-limit SizeSuffix If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off) --vfs-read-wait duration Time to wait for in-sequence read before seeking. (default 20ms) --vfs-write-wait duration Time to wait for in-sequence write before giving error. (default 1s) ``` See the [global flags page](/flags/) for global options not listed here. ## SEE ALSO * [rclone serve](/commands/rclone_serve/) - Serve a remote over a protocol.