--- title: "rclone bisync" description: "Perform bidirectional synchronization between two paths." status: Beta versionIntroduced: v1.58 # autogenerated - DO NOT EDIT, instead edit the source code in cmd/bisync/ and as part of making a release run "make commanddocs" --- # rclone bisync Perform bidirectional synchronization between two paths. ## Synopsis Perform bidirectional synchronization between two paths. [Bisync](https://rclone.org/bisync/) provides a bidirectional cloud sync solution in rclone. It retains the Path1 and Path2 filesystem listings from the prior run. On each successive run it will: - list files on Path1 and Path2, and check for changes on each side. Changes include `New`, `Newer`, `Older`, and `Deleted` files. - Propagate changes on Path1 to Path2, and vice-versa. Bisync is **in beta** and is considered an **advanced command**, so use with care. Make sure you have read and understood the entire [manual](https://rclone.org/bisync) (especially the [Limitations](https://rclone.org/bisync/#limitations) section) before using, or data loss can result. Questions can be asked in the [Rclone Forum](https://forum.rclone.org/). See [full bisync description](https://rclone.org/bisync/) for details. ``` rclone bisync remote1:path1 remote2:path2 [flags] ``` ## Options ``` --backup-dir1 string --backup-dir for Path1. Must be a non-overlapping path on the same remote. --backup-dir2 string --backup-dir for Path2. Must be a non-overlapping path on the same remote. --check-access Ensure expected RCLONE_TEST files are found on both Path1 and Path2 filesystems, else abort. --check-filename string Filename for --check-access (default: RCLONE_TEST) --check-sync string Controls comparison of final listings: true|false|only (default: true) (default "true") --compare string Comma-separated list of bisync-specific compare options ex. 'size,modtime,checksum' (default: 'size,modtime') --conflict-loser ConflictLoserAction Action to take on the loser of a sync conflict (when there is a winner) or on both files (when there is no winner): , num, pathname, delete (default: num) --conflict-resolve string Automatically resolve conflicts by preferring the version that is: none, path1, path2, newer, older, larger, smaller (default: none) (default "none") --conflict-suffix string Suffix to use when renaming a --conflict-loser. Can be either one string or two comma-separated strings to assign different suffixes to Path1/Path2. (default: 'conflict') --create-empty-src-dirs Sync creation and deletion of empty directories. (Not compatible with --remove-empty-dirs) --download-hash Compute hash by downloading when otherwise unavailable. (warning: may be slow and use lots of data!) --filters-file string Read filtering patterns from a file --force Bypass --max-delete safety check and run the sync. Consider using with --verbose -h, --help help for bisync --ignore-listing-checksum Do not use checksums for listings (add --ignore-checksum to additionally skip post-copy checksum checks) --max-lock Duration Consider lock files older than this to be expired (default: 0 (never expire)) (minimum: 2m) (default 0s) --no-cleanup Retain working files (useful for troubleshooting and testing). --no-slow-hash Ignore listing checksums only on backends where they are slow --recover Automatically recover from interruptions without requiring --resync. --remove-empty-dirs Remove ALL empty directories at the final cleanup step. --resilient Allow future runs to retry after certain less-serious errors, instead of requiring --resync. Use at your own risk! -1, --resync Performs the resync run. Equivalent to --resync-mode path1. Consider using --verbose or --dry-run first. --resync-mode string During resync, prefer the version that is: path1, path2, newer, older, larger, smaller (default: path1 if --resync, otherwise none for no resync.) (default "none") --slow-hash-sync-only Ignore slow checksums for listings and deltas, but still consider them during sync calls. --workdir string Use custom working dir - useful for testing. (default: {WORKDIR}) ``` Options shared with other commands are described next. See the [global flags page](/flags/) for global options not listed here. ### Copy Options Flags for anything which can copy a file ``` --check-first Do all the checks before starting transfers -c, --checksum Check for changes with size & checksum (if available, or fallback to size only) --compare-dest stringArray Include additional server-side paths during comparison --copy-dest stringArray Implies --compare-dest but also copies files from paths into destination --cutoff-mode HARD|SOFT|CAUTIOUS Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD) --ignore-case-sync Ignore case when synchronizing --ignore-checksum Skip post copy check of checksums --ignore-existing Skip all files that exist on destination --ignore-size Ignore size when skipping use modtime or checksum -I, --ignore-times Don't skip items that match size and time - transfer all unconditionally --immutable Do not modify files, fail if existing files have been modified --inplace Download directly to destination file instead of atomic download to temp/rename --max-backlog int Maximum number of objects in sync or check backlog (default 10000) --max-duration Duration Maximum duration rclone will transfer data for (default 0s) --max-transfer SizeSuffix Maximum size of data to transfer (default off) -M, --metadata If set, preserve metadata when copying objects --modify-window Duration Max time diff to be considered the same (default 1ns) --multi-thread-chunk-size SizeSuffix Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi) --multi-thread-cutoff SizeSuffix Use multi-thread downloads for files above this size (default 256Mi) --multi-thread-streams int Number of streams to use for multi-thread downloads (default 4) --multi-thread-write-buffer-size SizeSuffix In memory buffer size for writing when in multi-thread mode (default 128Ki) --no-check-dest Don't check the destination, copy regardless --no-traverse Don't traverse destination file system on copy --no-update-dir-modtime Don't update directory modification times --no-update-modtime Don't update destination modtime if files identical --order-by string Instructions on how to order the transfers, e.g. 'size,descending' --partial-suffix string Add partial-suffix to temporary file name when --inplace is not used (default ".partial") --refresh-times Refresh the modtime of remote files --server-side-across-configs Allow server-side operations (e.g. copy) to work across different configs --size-only Skip based on size only, not modtime or checksum --streaming-upload-cutoff SizeSuffix Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki) -u, --update Skip files that are newer on the destination ``` ### Important Options Important flags useful for most commands ``` -n, --dry-run Do a trial run with no permanent changes -i, --interactive Enable interactive mode -v, --verbose count Print lots more stuff (repeat for more) ``` ### Filter Options Flags for filtering directory listings ``` --delete-excluded Delete files on dest excluded from sync --exclude stringArray Exclude files matching pattern --exclude-from stringArray Read file exclude patterns from file (use - to read from stdin) --exclude-if-present stringArray Exclude directories if filename is present --files-from stringArray Read list of source-file names from file (use - to read from stdin) --files-from-raw stringArray Read list of source-file names from file without any processing of lines (use - to read from stdin) -f, --filter stringArray Add a file filtering rule --filter-from stringArray Read file filtering patterns from a file (use - to read from stdin) --ignore-case Ignore case in filters (case insensitive) --include stringArray Include files matching pattern --include-from stringArray Read file include patterns from file (use - to read from stdin) --max-age Duration Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off) --max-depth int If set limits the recursion depth to this (default -1) --max-size SizeSuffix Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off) --metadata-exclude stringArray Exclude metadatas matching pattern --metadata-exclude-from stringArray Read metadata exclude patterns from file (use - to read from stdin) --metadata-filter stringArray Add a metadata filtering rule --metadata-filter-from stringArray Read metadata filtering patterns from a file (use - to read from stdin) --metadata-include stringArray Include metadatas matching pattern --metadata-include-from stringArray Read metadata include patterns from file (use - to read from stdin) --min-age Duration Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off) --min-size SizeSuffix Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off) ``` ## See Also * [rclone](/commands/rclone/) - Show help for rclone commands, flags and backends.