extern/rclone
1
0
Fork 0
mirror of https://github.com/rclone/rclone.git synced 2024-12-23 15:38:57 +01:00
Code Issues Packages Projects Releases Wiki Activity
38381d3786
rclone/MANUAL.txt
Nick Craig-Wood a9adb43896 Version v1.42
2018-06-16 18:21:09 +01:00

12320 lines
403 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

rclone(1) User Manual
Nick Craig-Wood
Jun 16, 2018
RCLONE
[Logo]
Rclone is a command line program to sync files and directories to and
from:
- Amazon Drive
- Amazon S3
- Backblaze B2
- Box
- Ceph
- DigitalOcean Spaces
- Dreamhost
- Dropbox
- FTP
- Google Cloud Storage
- Google Drive
- HTTP
- Hubic
- IBM COS S3
- Memset Memstore
- Mega
- Microsoft Azure Blob Storage
- Microsoft OneDrive
- Minio
- Nextcloud
- OVH
- OpenDrive
- Openstack Swift
- Oracle Cloud Storage
- ownCloud
- pCloud
- put.io
- QingStor
- Rackspace Cloud Files
- SFTP
- Wasabi
- WebDAV
- Yandex Disk
- The local filesystem
Features
- MD5/SHA1 hashes checked at all times for file integrity
- Timestamps preserved on files
- Partial syncs supported on a whole file basis
- Copy mode to just copy new/changed files
- Sync (one way) mode to make a directory identical
- Check mode to check for file hash equality
- Can sync to and from network, eg two different cloud accounts
- Optional encryption (Crypt)
- Optional cache (Cache)
- Optional FUSE mount (rclone mount)
Links
- Home page
- Github project page for source and bug tracker
- Rclone Forum
- Google+ page
- Downloads
INSTALL
Rclone is a Go program and comes as a single binary file.
Quickstart
- Download the relevant binary.
- Unpack and the rclone binary.
- Run rclone config to setup. See rclone config docs for more details.
See below for some expanded Linux / macOS instructions.
See the Usage section of the docs for how to use rclone, or run
rclone -h.
Script installation
To install rclone on Linux/macOS/BSD systems, run:
curl https://rclone.org/install.sh | sudo bash
For beta installation, run:
curl https://rclone.org/install.sh | sudo bash -s beta
Note that this script checks the version of rclone installed first and
won't re-download if not needed.
Linux installation from precompiled binary
Fetch and unpack
curl -O https://downloads.rclone.org/rclone-current-linux-amd64.zip
unzip rclone-current-linux-amd64.zip
cd rclone-*-linux-amd64
Copy binary file
sudo cp rclone /usr/bin/
sudo chown root:root /usr/bin/rclone
sudo chmod 755 /usr/bin/rclone
Install manpage
sudo mkdir -p /usr/local/share/man/man1
sudo cp rclone.1 /usr/local/share/man/man1/
sudo mandb
Run rclone config to setup. See rclone config docs for more details.
rclone config
macOS installation from precompiled binary
Download the latest version of rclone.
cd && curl -O https://downloads.rclone.org/rclone-current-osx-amd64.zip
Unzip the download and cd to the extracted folder.
unzip -a rclone-current-osx-amd64.zip && cd rclone-*-osx-amd64
Move rclone to your $PATH. You will be prompted for your password.
sudo mkdir -p /usr/local/bin
sudo mv rclone /usr/local/bin/
(the mkdir command is safe to run, even if the directory already
exists).
Remove the leftover files.
cd .. && rm -rf rclone-*-osx-amd64 rclone-current-osx-amd64.zip
Run rclone config to setup. See rclone config docs for more details.
rclone config
Install from source
Make sure you have at least Go 1.6 installed. Make sure your GOPATH is
set, then:
go get -u -v github.com/ncw/rclone
and this will build the binary in $GOPATH/bin. If you have built rclone
before then you will want to update its dependencies first with this
go get -u -v github.com/ncw/rclone/...
Installation with Ansible
This can be done with Stefan Weichinger's ansible role.
Instructions
1. git clone https://github.com/stefangweichinger/ansible-rclone.git
into your local roles-directory
2. add the role to the hosts you want rclone installed to:
 
- hosts: rclone-hosts
roles:
- rclone
Configure
First, you'll need to configure rclone. As the object storage systems
have quite complicated authentication these are kept in a config file.
(See the --config entry for how to find the config file and choose its
location.)
The easiest way to make the config is to run rclone with the config
option:
rclone config
See the following for detailed instructions for
- Alias
- Amazon Drive
- Amazon S3
- Backblaze B2
- Box
- Cache
- Crypt - to encrypt other remotes
- DigitalOcean Spaces
- Dropbox
- FTP
- Google Cloud Storage
- Google Drive
- HTTP
- Hubic
- Mega
- Microsoft Azure Blob Storage
- Microsoft OneDrive
- Openstack Swift / Rackspace Cloudfiles / Memset Memstore
- OpenDrive
- Pcloud
- QingStor
- SFTP
- WebDAV
- Yandex Disk
- The local filesystem
Usage
Rclone syncs a directory tree from one storage system to another.
Its syntax is like this
Syntax: [options] subcommand <parameters> <parameters...>
Source and destination paths are specified by the name you gave the
storage system in the config file then the sub path, eg "drive:myfolder"
to look at "myfolder" in Google drive.
You can define as many storage paths as you like in the config file.
Subcommands
rclone uses a system of subcommands. For example
rclone ls remote:path # lists a re
rclone copy /local/path remote:path # copies /local/path to the remote
rclone sync /local/path remote:path # syncs /local/path to the remote
rclone config
Enter an interactive configuration session.
Synopsis
Enter an interactive configuration session where you can setup new
remotes and manage existing ones. You may also set or remove a password
to protect your configuration.
rclone config [flags]
Options
-h, --help help for config
rclone copy
Copy files from source to dest, skipping already copied
Synopsis
Copy the source to the destination. Doesn't transfer unchanged files,
testing by size and modification time or MD5SUM. Doesn't delete files
from the destination.
Note that it is always the contents of the directory that is synced, not
the directory so when source:path is a directory, it's the contents of
source:path that are copied, not the directory name and contents.
If dest:path doesn't exist, it is created and the source:path contents
go there.
For example
rclone copy source:sourcepath dest:destpath
Let's say there are two files in sourcepath
sourcepath/one.txt
sourcepath/two.txt
This copies them to
destpath/one.txt
destpath/two.txt
Not to
destpath/sourcepath/one.txt
destpath/sourcepath/two.txt
If you are familiar with rsync, rclone always works as if you had
written a trailing / - meaning "copy the contents of this directory".
This applies to all commands and whether you are talking about the
source or destination.
rclone copy source:path dest:path [flags]
Options
-h, --help help for copy
rclone sync
Make source and dest identical, modifying destination only.
Synopsis
Sync the source to the destination, changing the destination only.
Doesn't transfer unchanged files, testing by size and modification time
or MD5SUM. Destination is updated to match source, including deleting
files if necessary.
IMPORTANT: Since this can cause data loss, test first with the --dry-run
flag to see exactly what would be copied and deleted.
Note that files in the destination won't be deleted if there were any
errors at any point.
It is always the contents of the directory that is synced, not the
directory so when source:path is a directory, it's the contents of
source:path that are copied, not the directory name and contents. See
extended explanation in the copy command above if unsure.
If dest:path doesn't exist, it is created and the source:path contents
go there.
rclone sync source:path dest:path [flags]
Options
-h, --help help for sync
rclone move
Move files from source to dest.
Synopsis
Moves the contents of the source directory to the destination directory.
Rclone will error if the source and destination overlap and the remote
does not support a server side directory move operation.
If no filters are in use and if possible this will server side move
source:path into dest:path. After this source:path will no longer longer
exist.
Otherwise for each file in source:path selected by the filters (if any)
this will move it into dest:path. If possible a server side move will be
used, otherwise it will copy it (server side if possible) into dest:path
then delete the original (if no errors on copy) in source:path.
If you want to delete empty source directories after move, use the
--delete-empty-src-dirs flag.
IMPORTANT: Since this can cause data loss, test first with the --dry-run
flag.
rclone move source:path dest:path [flags]
Options
--delete-empty-src-dirs Delete empty source dirs after move
-h, --help help for move
rclone delete
Remove the contents of path.
Synopsis
Remove the contents of path. Unlike purge it obeys include/exclude
filters so can be used to selectively delete files.
Eg delete all files bigger than 100MBytes
Check what would be deleted first (use either)
rclone --min-size 100M lsl remote:path
rclone --dry-run --min-size 100M delete remote:path
Then delete
rclone --min-size 100M delete remote:path
That reads "delete everything with a minimum size of 100 MB", hence
delete all files bigger than 100MBytes.
rclone delete remote:path [flags]
Options
-h, --help help for delete
rclone purge
Remove the path and all of its contents.
Synopsis
Remove the path and all of its contents. Note that this does not obey
include/exclude filters - everything will be removed. Use delete if you
want to selectively delete files.
rclone purge remote:path [flags]
Options
-h, --help help for purge
rclone mkdir
Make the path if it doesn't already exist.
Synopsis
Make the path if it doesn't already exist.
rclone mkdir remote:path [flags]
Options
-h, --help help for mkdir
rclone rmdir
Remove the path if empty.
Synopsis
Remove the path. Note that you can't remove a path with objects in it,
use purge for that.
rclone rmdir remote:path [flags]
Options
-h, --help help for rmdir
rclone check
Checks the files in the source and destination match.
Synopsis
Checks the files in the source and destination match. It compares sizes
and hashes (MD5 or SHA1) and logs a report of files which don't match.
It doesn't alter the source or destination.
If you supply the --size-only flag, it will only compare the sizes not
the hashes as well. Use this for a quick check.
If you supply the --download flag, it will download the data from both
remotes and check them against each other on the fly. This can be useful
for remotes that don't support hashes or if you really want to check all
the data.
If you supply the --one-way flag, it will only check that files in
source match the files in destination, not the other way around. Meaning
extra files in destination that are not in the source will not trigger
an error.
rclone check source:path dest:path [flags]
Options
--download Check by downloading rather than with hash.
-h, --help help for check
--one-way Check one way only, source files must exist on remote
rclone ls
List the objects in the path with size and path.
Synopsis
Lists the objects in the source path to standard output in a human
readable format with size and path. Recurses by default.
Eg
$ rclone ls swift:bucket
60295 bevajer5jef
90613 canole
94467 diwogej7
37600 fubuwic
Any of the filtering options can be applied to this commmand.
There are several related list commands
- ls to list size and path of objects only
- lsl to list modification time, size and path of objects only
- lsd to list directories only
- lsf to list objects and directories in easy to parse format
- lsjson to list objects and directories in JSON format
ls,lsl,lsd are designed to be human readable. lsf is designed to be
human and machine readable. lsjson is designed to be machine readable.
Note that ls and lsl recurse by default - use "--max-depth 1" to stop
the recursion.
The other list commands lsd,lsf,lsjson do not recurse by default - use
"-R" to make them recurse.
Listing a non existent directory will produce an error except for
remotes which can't have empty directories (eg s3, swift, gcs, etc - the
bucket based remotes).
rclone ls remote:path [flags]
Options
-h, --help help for ls
rclone lsd
List all directories/containers/buckets in the path.
Synopsis
Lists the directories in the source path to standard output. Does not
recurse by default. Use the -R flag to recurse.
This command lists the total size of the directory (if known, -1 if
not), the modification time (if known, the current time if not), the
number of objects in the directory (if known, -1 if not) and the name of
the directory, Eg
$ rclone lsd swift:
494000 2018-04-26 08:43:20 10000 10000files
65 2018-04-26 08:43:20 1 1File
Or
$ rclone lsd drive:test
-1 2016-10-17 17:41:53 -1 1000files
-1 2017-01-03 14:40:54 -1 2500files
-1 2017-07-08 14:39:28 -1 4000files
If you just want the directory names use "rclone lsf --dirs-only".
Any of the filtering options can be applied to this commmand.
There are several related list commands
- ls to list size and path of objects only
- lsl to list modification time, size and path of objects only
- lsd to list directories only
- lsf to list objects and directories in easy to parse format
- lsjson to list objects and directories in JSON format
ls,lsl,lsd are designed to be human readable. lsf is designed to be
human and machine readable. lsjson is designed to be machine readable.
Note that ls and lsl recurse by default - use "--max-depth 1" to stop
the recursion.
The other list commands lsd,lsf,lsjson do not recurse by default - use
"-R" to make them recurse.
Listing a non existent directory will produce an error except for
remotes which can't have empty directories (eg s3, swift, gcs, etc - the
bucket based remotes).
rclone lsd remote:path [flags]
Options
-h, --help help for lsd
-R, --recursive Recurse into the listing.
rclone lsl
List the objects in path with modification time, size and path.
Synopsis
Lists the objects in the source path to standard output in a human
readable format with modification time, size and path. Recurses by
default.
Eg
$ rclone lsl swift:bucket
60295 2016-06-25 18:55:41.062626927 bevajer5jef
90613 2016-06-25 18:55:43.302607074 canole
94467 2016-06-25 18:55:43.046609333 diwogej7
37600 2016-06-25 18:55:40.814629136 fubuwic
Any of the filtering options can be applied to this commmand.
There are several related list commands
- ls to list size and path of objects only
- lsl to list modification time, size and path of objects only
- lsd to list directories only
- lsf to list objects and directories in easy to parse format
- lsjson to list objects and directories in JSON format
ls,lsl,lsd are designed to be human readable. lsf is designed to be
human and machine readable. lsjson is designed to be machine readable.
Note that ls and lsl recurse by default - use "--max-depth 1" to stop
the recursion.
The other list commands lsd,lsf,lsjson do not recurse by default - use
"-R" to make them recurse.
Listing a non existent directory will produce an error except for
remotes which can't have empty directories (eg s3, swift, gcs, etc - the
bucket based remotes).
rclone lsl remote:path [flags]
Options
-h, --help help for lsl
rclone md5sum
Produces an md5sum file for all the objects in the path.
Synopsis
Produces an md5sum file for all the objects in the path. This is in the
same format as the standard md5sum tool produces.
rclone md5sum remote:path [flags]
Options
-h, --help help for md5sum
rclone sha1sum
Produces an sha1sum file for all the objects in the path.
Synopsis
Produces an sha1sum file for all the objects in the path. This is in the
same format as the standard sha1sum tool produces.
rclone sha1sum remote:path [flags]
Options
-h, --help help for sha1sum
rclone size
Prints the total size and number of objects in remote:path.
Synopsis
Prints the total size and number of objects in remote:path.
rclone size remote:path [flags]
Options
-h, --help help for size
--json format output as JSON
rclone version
Show the version number.
Synopsis
Show the version number.
rclone version [flags]
Options
-h, --help help for version
rclone cleanup
Clean up the remote if possible
Synopsis
Clean up the remote if possible. Empty the trash or delete old file
versions. Not supported by all remotes.
rclone cleanup remote:path [flags]
Options
-h, --help help for cleanup
rclone dedupe
Interactively find duplicate files and delete/rename them.
Synopsis
By default dedupe interactively finds duplicate files and offers to
delete all but one or rename them to be different. Only useful with
Google Drive which can have duplicate file names.
In the first pass it will merge directories with the same name. It will
do this iteratively until all the identical directories have been
merged.
The dedupe command will delete all but one of any identical (same
md5sum) files it finds without confirmation. This means that for most
duplicated files the dedupe command will not be interactive. You can use
--dry-run to see what would happen without doing anything.
Here is an example run.
Before - with duplicates
$ rclone lsl drive:dupes
6048320 2016-03-05 16:23:16.798000000 one.txt
6048320 2016-03-05 16:23:11.775000000 one.txt
564374 2016-03-05 16:23:06.731000000 one.txt
6048320 2016-03-05 16:18:26.092000000 one.txt
6048320 2016-03-05 16:22:46.185000000 two.txt
1744073 2016-03-05 16:22:38.104000000 two.txt
564374 2016-03-05 16:22:52.118000000 two.txt
Now the dedupe session
$ rclone dedupe drive:dupes
2016/03/05 16:24:37 Google drive root 'dupes': Looking for duplicates using interactive mode.
one.txt: Found 4 duplicates - deleting identical copies
one.txt: Deleting 2/3 identical duplicates (md5sum "1eedaa9fe86fd4b8632e2ac549403b36")
one.txt: 2 duplicates remain
1: 6048320 bytes, 2016-03-05 16:23:16.798000000, md5sum 1eedaa9fe86fd4b8632e2ac549403b36
2: 564374 bytes, 2016-03-05 16:23:06.731000000, md5sum 7594e7dc9fc28f727c42ee3e0749de81
s) Skip and do nothing
k) Keep just one (choose which in next step)
r) Rename all to be different (by changing file.jpg to file-1.jpg)
s/k/r> k
Enter the number of the file to keep> 1
one.txt: Deleted 1 extra copies
two.txt: Found 3 duplicates - deleting identical copies
two.txt: 3 duplicates remain
1: 564374 bytes, 2016-03-05 16:22:52.118000000, md5sum 7594e7dc9fc28f727c42ee3e0749de81
2: 6048320 bytes, 2016-03-05 16:22:46.185000000, md5sum 1eedaa9fe86fd4b8632e2ac549403b36
3: 1744073 bytes, 2016-03-05 16:22:38.104000000, md5sum 851957f7fb6f0bc4ce76be966d336802
s) Skip and do nothing
k) Keep just one (choose which in next step)
r) Rename all to be different (by changing file.jpg to file-1.jpg)
s/k/r> r
two-1.txt: renamed from: two.txt
two-2.txt: renamed from: two.txt
two-3.txt: renamed from: two.txt
The result being
$ rclone lsl drive:dupes
6048320 2016-03-05 16:23:16.798000000 one.txt
564374 2016-03-05 16:22:52.118000000 two-1.txt
6048320 2016-03-05 16:22:46.185000000 two-2.txt
1744073 2016-03-05 16:22:38.104000000 two-3.txt
Dedupe can be run non interactively using the --dedupe-mode flag or by
using an extra parameter with the same value
- --dedupe-mode interactive - interactive as above.
- --dedupe-mode skip - removes identical files then skips anything
left.
- --dedupe-mode first - removes identical files then keeps the first
one.
- --dedupe-mode newest - removes identical files then keeps the newest
one.
- --dedupe-mode oldest - removes identical files then keeps the oldest
one.
- --dedupe-mode largest - removes identical files then keeps the
largest one.
- --dedupe-mode rename - removes identical files then renames the rest
to be different.
For example to rename all the identically named photos in your Google
Photos directory, do
rclone dedupe --dedupe-mode rename "drive:Google Photos"
Or
rclone dedupe rename "drive:Google Photos"
rclone dedupe [mode] remote:path [flags]
Options
--dedupe-mode string Dedupe mode interactive|skip|first|newest|oldest|rename. (default "interactive")
-h, --help help for dedupe
rclone about
Get quota information from the remote.
Synopsis
Get quota information from the remote, like bytes used/free/quota and
bytes used in the trash. Not supported by all remotes.
This will print to stdout something like this:
Total: 17G
Used: 7.444G
Free: 1.315G
Trashed: 100.000M
Other: 8.241G
Where the fields are:
- Total: total size available.
- Used: total size used
- Free: total amount this user could upload.
- Trashed: total amount in the trash
- Other: total amount in other storage (eg Gmail, Google Photos)
- Objects: total number of objects in the storage
Note that not all the backends provide all the fields - they will be
missing if they are not known for that backend. Where it is known that
the value is unlimited the value will also be omitted.
Use the --full flag to see the numbers written out in full, eg
Total: 18253611008
Used: 7993453766
Free: 1411001220
Trashed: 104857602
Other: 8849156022
Use the --json flag for a computer readable output, eg
{
"total": 18253611008,
"used": 7993453766,
"trashed": 104857602,
"other": 8849156022,
"free": 1411001220
}
rclone about remote: [flags]
Options
--full Full numbers instead of SI units
-h, --help help for about
--json Format output as JSON
rclone authorize
Remote authorization.
Synopsis
Remote authorization. Used to authorize a remote or headless rclone from
a machine with a browser - use as instructed by rclone config.
rclone authorize [flags]
Options
-h, --help help for authorize
rclone cachestats
Print cache stats for a remote
Synopsis
Print cache stats for a remote in JSON format
rclone cachestats source: [flags]
Options
-h, --help help for cachestats
rclone cat
Concatenates any files and sends them to stdout.
Synopsis
rclone cat sends any files to standard output.
You can use it like this to output a single file
rclone cat remote:path/to/file
Or like this to output any file in dir or subdirectories.
rclone cat remote:path/to/dir
Or like this to output any .txt files in dir or subdirectories.
rclone --include "*.txt" cat remote:path/to/dir
Use the --head flag to print characters only at the start, --tail for
the end and --offset and --count to print a section in the middle. Note
that if offset is negative it will count from the end, so --offset -1
--count 1 is equivalent to --tail 1.
rclone cat remote:path [flags]
Options
--count int Only print N characters. (default -1)
--discard Discard the output instead of printing.
--head int Only print the first N characters.
-h, --help help for cat
--offset int Start printing at offset N (or from end if -ve).
--tail int Only print the last N characters.
rclone config create
Create a new remote with name, type and options.
Synopsis
Create a new remote of with and options. The options should be passed in
in pairs of .
For example to make a swift remote of name myremote using auto config
you would do:
rclone config create myremote swift env_auth true
rclone config create <name> <type> [<key> <value>]* [flags]
Options
-h, --help help for create
rclone config delete
Delete an existing remote .
Synopsis
Delete an existing remote .
rclone config delete <name> [flags]
Options
-h, --help help for delete
rclone config dump
Dump the config file as JSON.
Synopsis
Dump the config file as JSON.
rclone config dump [flags]
Options
-h, --help help for dump
rclone config edit
Enter an interactive configuration session.
Synopsis
Enter an interactive configuration session where you can setup new
remotes and manage existing ones. You may also set or remove a password
to protect your configuration.
rclone config edit [flags]
Options
-h, --help help for edit
rclone config file
Show path of configuration file in use.
Synopsis
Show path of configuration file in use.
rclone config file [flags]
Options
-h, --help help for file
rclone config password
Update password in an existing remote.
Synopsis
Update an existing remote's password. The password should be passed in
in pairs of .
For example to set password of a remote of name myremote you would do:
rclone config password myremote fieldname mypassword
rclone config password <name> [<key> <value>]+ [flags]
Options
-h, --help help for password
rclone config providers
List in JSON format all the providers and options.
Synopsis
List in JSON format all the providers and options.
rclone config providers [flags]
Options
-h, --help help for providers
rclone config show
Print (decrypted) config file, or the config for a single remote.
Synopsis
Print (decrypted) config file, or the config for a single remote.
rclone config show [<remote>] [flags]
Options
-h, --help help for show
rclone config update
Update options in an existing remote.
Synopsis
Update an existing remote's options. The options should be passed in in
pairs of .
For example to update the env_auth field of a remote of name myremote
you would do:
rclone config update myremote swift env_auth true
rclone config update <name> [<key> <value>]+ [flags]
Options
-h, --help help for update
rclone copyto
Copy files from source to dest, skipping already copied
Synopsis
If source:path is a file or directory then it copies it to a file or
directory named dest:path.
This can be used to upload single files to other than their current
name. If the source is a directory then it acts exactly like the copy
command.
So
rclone copyto src dst
where src and dst are rclone paths, either remote:path or /path/to/local
or C:.
This will:
if src is file
copy it to dst, overwriting an existing file if it exists
if src is directory
copy it to dst, overwriting existing files if they exist
see copy command for full details
This doesn't transfer unchanged files, testing by size and modification
time or MD5SUM. It doesn't delete files from the destination.
rclone copyto source:path dest:path [flags]
Options
-h, --help help for copyto
rclone cryptcheck
Cryptcheck checks the integrity of a crypted remote.
Synopsis
rclone cryptcheck checks a remote against a crypted remote. This is the
equivalent of running rclone check, but able to check the checksums of
the crypted remote.
For it to work the underlying remote of the cryptedremote must support
some kind of checksum.
It works by reading the nonce from each file on the cryptedremote: and
using that to encrypt each file on the remote:. It then checks the
checksum of the underlying file on the cryptedremote: against the
checksum of the file it has just encrypted.
Use it like this
rclone cryptcheck /path/to/files encryptedremote:path
You can use it like this also, but that will involve downloading all the
files in remote:path.
rclone cryptcheck remote:path encryptedremote:path
After it has run it will log the status of the encryptedremote:.
If you supply the --one-way flag, it will only check that files in
source match the files in destination, not the other way around. Meaning
extra files in destination that are not in the source will not trigger
an error.
rclone cryptcheck remote:path cryptedremote:path [flags]
Options
-h, --help help for cryptcheck
--one-way Check one way only, source files must exist on destination
rclone cryptdecode
Cryptdecode returns unencrypted file names.
Synopsis
rclone cryptdecode returns unencrypted file names when provided with a
list of encrypted file names. List limit is 10 items.
If you supply the --reverse flag, it will return encrypted file names.
use it like this
rclone cryptdecode encryptedremote: encryptedfilename1 encryptedfilename2
rclone cryptdecode --reverse encryptedremote: filename1 filename2
rclone cryptdecode encryptedremote: encryptedfilename [flags]
Options
-h, --help help for cryptdecode
--reverse Reverse cryptdecode, encrypts filenames
rclone dbhashsum
Produces a Dropbox hash file for all the objects in the path.
Synopsis
Produces a Dropbox hash file for all the objects in the path. The hashes
are calculated according to Dropbox content hash rules. The output is in
the same format as md5sum and sha1sum.
rclone dbhashsum remote:path [flags]
Options
-h, --help help for dbhashsum
rclone deletefile
Remove a single file path from remote.
Synopsis
Remove a single file path from remote. Unlike delete it cannot be used
to remove a directory and it doesn't obey include/exclude filters - if
the specified file exists, it will always be removed.
rclone deletefile remote:path [flags]
Options
-h, --help help for deletefile
rclone genautocomplete
Output completion script for a given shell.
Synopsis
Generates a shell completion script for rclone. Run with --help to list
the supported shells.
Options
-h, --help help for genautocomplete
rclone genautocomplete bash
Output bash completion script for rclone.
Synopsis
Generates a bash shell autocompletion script for rclone.
This writes to /etc/bash_completion.d/rclone by default so will probably
need to be run with sudo or as root, eg
sudo rclone genautocomplete bash
Logout and login again to use the autocompletion scripts, or source them
directly
. /etc/bash_completion
If you supply a command line argument the script will be written there.
rclone genautocomplete bash [output_file] [flags]
Options
-h, --help help for bash
rclone genautocomplete zsh
Output zsh completion script for rclone.
Synopsis
Generates a zsh autocompletion script for rclone.
This writes to /usr/share/zsh/vendor-completions/_rclone by default so
will probably need to be run with sudo or as root, eg
sudo rclone genautocomplete zsh
Logout and login again to use the autocompletion scripts, or source them
directly
autoload -U compinit && compinit
If you supply a command line argument the script will be written there.
rclone genautocomplete zsh [output_file] [flags]
Options
-h, --help help for zsh
rclone gendocs
Output markdown docs for rclone to the directory supplied.
Synopsis
This produces markdown docs for the rclone commands to the directory
supplied. These are in a format suitable for hugo to render into the
rclone.org website.
rclone gendocs output_directory [flags]
Options
-h, --help help for gendocs
rclone hashsum
Produces an hashsum file for all the objects in the path.
Synopsis
Produces a hash file for all the objects in the path using the hash
named. The output is in the same format as the standard md5sum/sha1sum
tool.
Run without a hash to see the list of supported hashes, eg
$ rclone hashsum
Supported hashes are:
* MD5
* SHA-1
* DropboxHash
* QuickXorHash
Then
$ rclone hashsum MD5 remote:path
rclone hashsum <hash> remote:path [flags]
Options
-h, --help help for hashsum
rclone link
Generate public link to file/folder.
Synopsis
rclone link will create or retrieve a public link to the given file or
folder.
rclone link remote:path/to/file
rclone link remote:path/to/folder/
If successful, the last line of the output will contain the link. Exact
capabilities depend on the remote, but the link will always be created
with the least constraints – e.g. no expiry, no password protection,
accessible without account.
rclone link remote:path [flags]
Options
-h, --help help for link
rclone listremotes
List all the remotes in the config file.
Synopsis
rclone listremotes lists all the available remotes from the config file.
When uses with the -l flag it lists the types too.
rclone listremotes [flags]
Options
-h, --help help for listremotes
-l, --long Show the type as well as names.
rclone lsf
List directories and objects in remote:path formatted for parsing
Synopsis
List the contents of the source path (directories and objects) to
standard output in a form which is easy to parse by scripts. By default
this will just be the names of the objects and directories, one per
line. The directories will have a / suffix.
Eg
$ rclone lsf swift:bucket
bevajer5jef
canole
diwogej7
ferejej3gux/
fubuwic
Use the --format option to control what gets listed. By default this is
just the path, but you can use these parameters to control the output:
p - path
s - size
t - modification time
h - hash
i - ID of object if known
m - MimeType of object if known
So if you wanted the path, size and modification time, you would use
--format "pst", or maybe --format "tsp" to put the path last.
Eg
$ rclone lsf --format "tsp" swift:bucket
2016-06-25 18:55:41;60295;bevajer5jef
2016-06-25 18:55:43;90613;canole
2016-06-25 18:55:43;94467;diwogej7
2018-04-26 08:50:45;0;ferejej3gux/
2016-06-25 18:55:40;37600;fubuwic
If you specify "h" in the format you will get the MD5 hash by default,
use the "--hash" flag to change which hash you want. Note that this can
be returned as an empty string if it isn't available on the object (and
for directories), "ERROR" if there was an error reading it from the
object and "UNSUPPORTED" if that object does not support that hash type.
For example to emulate the md5sum command you can use
rclone lsf -R --hash MD5 --format hp --separator " " --files-only .
Eg
$ rclone lsf -R --hash MD5 --format hp --separator " " --files-only swift:bucket
7908e352297f0f530b84a756f188baa3 bevajer5jef
cd65ac234e6fea5925974a51cdd865cc canole
03b5341b4f234b9d984d03ad076bae91 diwogej7
8fd37c3810dd660778137ac3a66cc06d fubuwic
99713e14a4c4ff553acaf1930fad985b gixacuh7ku
(Though "rclone md5sum ." is an easier way of typing this.)
By default the separator is ";" this can be changed with the --separator
flag. Note that separators aren't escaped in the path so putting it last
is a good strategy.
Eg
$ rclone lsf --separator "," --format "tshp" swift:bucket
2016-06-25 18:55:41,60295,7908e352297f0f530b84a756f188baa3,bevajer5jef
2016-06-25 18:55:43,90613,cd65ac234e6fea5925974a51cdd865cc,canole
2016-06-25 18:55:43,94467,03b5341b4f234b9d984d03ad076bae91,diwogej7
2018-04-26 08:52:53,0,,ferejej3gux/
2016-06-25 18:55:40,37600,8fd37c3810dd660778137ac3a66cc06d,fubuwic
You can output in CSV standard format. This will escape things in " if
they contain ,
Eg
$ rclone lsf --csv --files-only --format ps remote:path
test.log,22355
test.sh,449
"this file contains a comma, in the file name.txt",6
Note that the --absolute parameter is useful for making lists of files
to pass to an rclone copy with the --files-from flag.
For example to find all the files modified within one day and copy those
only (without traversing the whole directory structure):
rclone lsf --absolute --files-only --max-age 1d /path/to/local > new_files
rclone copy --files-from new_files /path/to/local remote:path
Any of the filtering options can be applied to this commmand.
There are several related list commands
- ls to list size and path of objects only
- lsl to list modification time, size and path of objects only
- lsd to list directories only
- lsf to list objects and directories in easy to parse format
- lsjson to list objects and directories in JSON format
ls,lsl,lsd are designed to be human readable. lsf is designed to be
human and machine readable. lsjson is designed to be machine readable.
Note that ls and lsl recurse by default - use "--max-depth 1" to stop
the recursion.
The other list commands lsd,lsf,lsjson do not recurse by default - use
"-R" to make them recurse.
Listing a non existent directory will produce an error except for
remotes which can't have empty directories (eg s3, swift, gcs, etc - the
bucket based remotes).
rclone lsf remote:path [flags]
Options
--absolute Put a leading / in front of path names.
--csv Output in CSV format.
-d, --dir-slash Append a slash to directory names. (default true)
--dirs-only Only list directories.
--files-only Only list files.
-F, --format string Output format - see help for details (default "p")
--hash h Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "MD5")
-h, --help help for lsf
-R, --recursive Recurse into the listing.
-s, --separator string Separator for the items in the format. (default ";")
rclone lsjson
List directories and objects in the path in JSON format.
Synopsis
List directories and objects in the path in JSON format.
The output is an array of Items, where each Item looks like this
{ "Hashes" : { "SHA-1" : "f572d396fae9206628714fb2ce00f72e94f2258f",
"MD5" : "b1946ac92492d2347c6235b4d2611184", "DropboxHash" :
"ecb65bb98f9d905b70458986c39fcbad7715e5f2fcc3b1f07767d7c83e2438cc" },
"ID": "y2djkhiujf83u33", "IsDir" : false, "MimeType" :
"application/octet-stream", "ModTime" :
"2017-05-31T16:15:57.034468261+01:00", "Name" : "file.txt", "Encrypted"
: "v0qpsdq8anpci8n929v3uu9338", "Path" : "full/path/goes/here/file.txt",
"Size" : 6 }
If --hash is not specified the Hashes property won't be emitted.
If --no-modtime is specified then ModTime will be blank.
If --encrypted is not specified the Encrypted won't be emitted.
The Path field will only show folders below the remote path being
listed. If "remote:path" contains the file "subfolder/file.txt", the
Path for "file.txt" will be "subfolder/file.txt", not
"remote:path/subfolder/file.txt". When used without --recursive the Path
will always be the same as Name.
The time is in RFC3339 format with nanosecond precision.
The whole output can be processed as a JSON blob, or alternatively it
can be processed line by line as each item is written one to a line.
Any of the filtering options can be applied to this commmand.
There are several related list commands
- ls to list size and path of objects only
- lsl to list modification time, size and path of objects only
- lsd to list directories only
- lsf to list objects and directories in easy to parse format
- lsjson to list objects and directories in JSON format
ls,lsl,lsd are designed to be human readable. lsf is designed to be
human and machine readable. lsjson is designed to be machine readable.
Note that ls and lsl recurse by default - use "--max-depth 1" to stop
the recursion.
The other list commands lsd,lsf,lsjson do not recurse by default - use
"-R" to make them recurse.
Listing a non existent directory will produce an error except for
remotes which can't have empty directories (eg s3, swift, gcs, etc - the
bucket based remotes).
rclone lsjson remote:path [flags]
Options
-M, --encrypted Show the encrypted names.
--hash Include hashes in the output (may take longer).
-h, --help help for lsjson
--no-modtime Don't read the modification time (can speed things up).
-R, --recursive Recurse into the listing.
rclone mount
Mount the remote as a mountpoint. EXPERIMENTAL
Synopsis
rclone mount allows Linux, FreeBSD, macOS and Windows to mount any of
Rclone's cloud storage systems as a file system with FUSE.
This is EXPERIMENTAL - use with care.
First set up your remote using rclone config. Check it works with
rclone ls etc.
Start the mount like this
rclone mount remote:path/to/files /path/to/local/mount
Or on Windows like this where X: is an unused drive letter
rclone mount remote:path/to/files X:
When the program ends, either via Ctrl+C or receiving a SIGINT or
SIGTERM signal, the mount is automatically stopped.
The umount operation can fail, for example when the mountpoint is busy.
When that happens, it is the user's responsibility to stop the mount
manually with
# Linux
fusermount -u /path/to/local/mount
# OS X
umount /path/to/local/mount
Installing on Windows
To run rclone mount on Windows, you will need to download and install
WinFsp.
WinFsp is an open source Windows File System Proxy which makes it easy
to write user space file systems for Windows. It provides a FUSE
emulation layer which rclone uses combination with cgofuse. Both of
these packages are by Bill Zissimopoulos who was very helpful during the
implementation of rclone mount for Windows.
Windows caveats
Note that drives created as Administrator are not visible by other
accounts (including the account that was elevated as Administrator). So
if you start a Windows drive from an Administrative Command Prompt and
then try to access the same drive from Explorer (which does not run as
Administrator), you will not be able to see the new drive.
The easiest way around this is to start the drive from a normal command
prompt. It is also possible to start a drive from the SYSTEM account
(using the WinFsp.Launcher infrastructure) which creates drives
accessible for everyone on the system or alternatively using the nssm
service manager.
Limitations
Without the use of "--vfs-cache-mode" this can only write files
sequentially, it can only seek when reading. This means that many
applications won't work with their files on an rclone mount without
"--vfs-cache-mode writes" or "--vfs-cache-mode full". See the File
Caching section for more info.
The bucket based remotes (eg Swift, S3, Google Compute Storage, B2,
Hubic) won't work from the root - you will need to specify a bucket, or
a path within the bucket. So swift: won't work whereas swift:bucket will
as will swift:bucket/path. None of these support the concept of
directories, so empty directories will have a tendency to disappear once
they fall out of the directory cache.
Only supported on Linux, FreeBSD, OS X and Windows at the moment.
rclone mount vs rclone sync/copy
File systems expect things to be 100% reliable, whereas cloud storage
systems are a long way from 100% reliable. The rclone sync/copy commands
cope with this with lots of retries. However rclone mount can't use
retries in the same way without making local copies of the uploads. Look
at the EXPERIMENTAL file caching for solutions to make mount mount more
reliable.
Attribute caching
You can use the flag --attr-timeout to set the time the kernel caches
the attributes (size, modification time etc) for directory entries.
The default is "1s" which caches files just long enough to avoid too
many callbacks to rclone from the kernel.
In theory 0s should be the correct value for filesystems which can
change outside the control of the kernel. However this causes quite a
few problems such as rclone using too much memory, rclone not serving
files to samba and excessive time listing directories.
The kernel can cache the info about a file for the time given by
"--attr-timeout". You may see corruption if the remote file changes
length during this window. It will show up as either a truncated file or
a file with garbage on the end. With "--attr-timeout 1s" this is very
unlikely but not impossible. The higher you set "--attr-timeout" the
more likely it is. The default setting of "1s" is the lowest setting
which mitigates the problems above.
If you set it higher ('10s' or '1m' say) then the kernel will call back
to rclone less often making it more efficient, however there is more
chance of the corruption issue above.
If files don't change on the remote outside of the control of rclone
then there is no chance of corruption.
This is the same as setting the attr_timeout option in mount.fuse.
Filters
Note that all the rclone filters can be used to select a subset of the
files to be visible in the mount.
systemd
When running rclone mount as a systemd service, it is possible to use
Type=notify. In this case the service will enter the started state after
the mountpoint has been successfully set up. Units having the rclone
mount service specified as a requirement will see all files and folders
immediately in this mode.
chunked reading
--vfs-read-chunk-size will enable reading the source objects in parts.
This can reduce the used download quota for some remotes by requesting
only chunks from the remote that are actually read at the cost of an
increased number of requests.
When --vfs-read-chunk-size-limit is also specified and greater than
--vfs-read-chunk-size, the chunk size for each open file will get
doubled for each chunk read, until the specified value is reached. A
value of -1 will disable the limit and the chunk size will grow
indefinitely.
With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the
following parts will be downloaded: 0-100M, 100M-200M, 200M-300M,
300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified,
the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M,
1200M-1700M and so on.
Chunked reading will only work with --vfs-cache-mode < full, as the file
will always be copied to the vfs cache before opening with
--vfs-cache-mode full.
Directory Cache
Using the --dir-cache-time flag, you can set how long a directory should
be considered up to date and not refreshed from the backend. Changes
made locally in the mount may appear immediately or invalidate the
cache. However, changes done on the remote will only be picked up once
the cache expires.
Alternatively, you can send a SIGHUP signal to rclone for it to flush
all directory caches, regardless of how old they are. Assuming only one
rclone instance is running, you can reset the cache like this:
kill -SIGHUP $(pidof rclone)
If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:
rclone rc vfs/forget
Or individual files or directories:
rclone rc vfs/forget file=path/to/file dir=path/to/dir
File Caching
NB File caching is EXPERIMENTAL - use with care!
These flags control the VFS file caching options. The VFS layer is used
by rclone mount to make a cloud storage system work more like a normal
file system.
You'll need to enable VFS caching if you want, for example, to read and
write simultaneously to a file. See below for more details.
Note that the VFS cache works in addition to the cache backend and you
may find that you need one or the other or both.
--cache-dir string Directory rclone will use for caching.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.
The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.
Note that files are written back to the remote only when they are closed
so if rclone is quit or dies with open files then these won't get
written back to the remote. However they will still be in the on disk
cache.
--vfs-cache-mode off
In this mode the cache will read directly from the remote and write
directly to the remote without caching anything on disk.
This will mean some operations are not possible
- Files can't be opened for both read AND write
- Files opened for write can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files open for read with O_TRUNC will be opened write only
- Files open for write only will behave as if O_TRUNC was supplied
- Open modes O_APPEND, O_TRUNC are ignored
- If an upload fails it can't be retried
--vfs-cache-mode minimal
This is very similar to "off" except that files opened for read AND
write will be buffered to disks. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.
These operations are not possible
- Files opened for write only can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files opened for write only will ignore O_APPEND, O_TRUNC
- If an upload fails it can't be retried
--vfs-cache-mode writes
In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.
This mode should support all normal file system operations.
If an upload fails it will be retried up to --low-level-retries times.
--vfs-cache-mode full
In this mode all reads and writes are buffered to and from disk. When a
file is opened for read it will be downloaded in its entirety first.
This may be appropriate for your needs, or you may prefer to look at the
cache backend which does a much more sophisticated job of caching,
including caching directory hierarchies and chunks of files.
In this mode, unlike the others, when a file is written to the disk, it
will be kept on the disk after it is written to the remote. It will be
purged on a schedule according to --vfs-cache-max-age.
This mode should support all normal file system operations.
If an upload or download fails it will be retried up to
--low-level-retries times.
rclone mount remote:path /path/to/mountpoint [flags]
Options
--allow-non-empty Allow mounting over a non-empty directory.
--allow-other Allow access to other users.
--allow-root Allow access to root user.
--attr-timeout duration Time for which file/directory attributes are cached. (default 1s)
--daemon Run mount as a daemon (background mode).
--debug-fuse Debug the FUSE internals - needs -v.
--default-permissions Makes kernel enforce access control based on the file mode.
--dir-cache-time duration Time to cache directory entries for. (default 5m0s)
--fuse-flag stringArray Flags or arguments to be passed direct to libfuse/WinFsp. Repeat if required.
--gid uint32 Override the gid field set by the filesystem. (default 502)
-h, --help help for mount
--max-read-ahead int The number of bytes that can be prefetched for sequential reads. (default 128k)
--no-checksum Don't compare checksums on up/download.
--no-modtime Don't read/write the modification time (can speed things up).
--no-seek Don't allow seeking in files.
-o, --option stringArray Option for libfuse/WinFsp. Repeat if required.
--poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s)
--read-only Mount read-only.
--uid uint32 Override the uid field set by the filesystem. (default 502)
--umask int Override the permission bits set by the filesystem.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
--vfs-read-chunk-size int Read the source objects in chunks.
--vfs-read-chunk-size-limit int If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. -1 is unlimited.
--volname string Set the volume name (not supported by all OSes).
--write-back-cache Makes kernel buffer writes before sending them to rclone. Without this, writethrough caching is used.
rclone moveto
Move file or directory from source to dest.
Synopsis
If source:path is a file or directory then it moves it to a file or
directory named dest:path.
This can be used to rename files or upload single files to other than
their existing name. If the source is a directory then it acts exacty
like the move command.
So
rclone moveto src dst
where src and dst are rclone paths, either remote:path or /path/to/local
or C:.
This will:
if src is file
move it to dst, overwriting an existing file if it exists
if src is directory
move it to dst, overwriting existing files if they exist
see move command for full details
This doesn't transfer unchanged files, testing by size and modification
time or MD5SUM. src will be deleted on successful transfer.
IMPORTANT: Since this can cause data loss, test first with the --dry-run
flag.
rclone moveto source:path dest:path [flags]
Options
-h, --help help for moveto
rclone ncdu
Explore a remote with a text based user interface.
Synopsis
This displays a text based user interface allowing the navigation of a
remote. It is most useful for answering the question - "What is using
all my disk space?".
To make the user interface it first scans the entire remote given and
builds an in memory representation. rclone ncdu can be used during this
scanning phase and you will see it building up the directory structure
as it goes along.
Here are the keys - press '?' to toggle the help on and off
↑,↓ or k,j to Move
→,l to enter
←,h to return
c toggle counts
g toggle graph
n,s,C sort by name,size,count
^L refresh screen
? to toggle help on and off
q/ESC/c-C to quit
This an homage to the ncdu tool but for rclone remotes. It is missing
lots of features at the moment, most importantly deleting files, but is
useful as it stands.
rclone ncdu remote:path [flags]
Options
-h, --help help for ncdu
rclone obscure
Obscure password for use in the rclone.conf
Synopsis
Obscure password for use in the rclone.conf
rclone obscure password [flags]
Options
-h, --help help for obscure
rclone rc
Run a command against a running rclone.
Synopsis
This runs a command against a running rclone. By default it will use
that specified in the --rc-addr command.
Arguments should be passed in as parameter=value.
The result will be returned as a JSON object by default.
Use "rclone rc" to see a list of all possible commands.
rclone rc commands parameter [flags]
Options
-h, --help help for rc
--no-output If set don't output the JSON result.
--url string URL to connect to rclone remote control. (default "http://localhost:5572/")
rclone rcat
Copies standard input to file on remote.
Synopsis
rclone rcat reads from standard input (stdin) and copies it to a single
remote file.
echo "hello world" | rclone rcat remote:path/to/file
ffmpeg - | rclone rcat remote:path/to/file
If the remote file already exists, it will be overwritten.
rcat will try to upload small files in a single request, which is
usually more efficient than the streaming/chunked upload endpoints,
which use multiple requests. Exact behaviour depends on the remote. What
is considered a small file may be set through --streaming-upload-cutoff.
Uploading only starts after the cutoff is reached or if the file ends
before that. The data must fit into RAM. The cutoff needs to be small
enough to adhere the limits of your remote, please see there. Generally
speaking, setting this cutoff too high will decrease your performance.
Note that the upload can also not be retried because the data is not
kept around until the upload succeeds. If you need to transfer a lot of
data, you're better off caching locally and then rclone move it to the
destination.
rclone rcat remote:path [flags]
Options
-h, --help help for rcat
rclone rmdirs
Remove empty directories under the path.
Synopsis
This removes any empty directories (or directories that only contain
empty directories) under the path that it finds, including the path if
it has nothing in.
If you supply the --leave-root flag, it will not remove the root
directory.
This is useful for tidying up remotes that rclone has left a lot of
empty directories in.
rclone rmdirs remote:path [flags]
Options
-h, --help help for rmdirs
--leave-root Do not remove root directory if empty
rclone serve
Serve a remote over a protocol.
Synopsis
rclone serve is used to serve a remote over a given protocol. This
command requires the use of a subcommand to specify the protocol, eg
rclone serve http remote:
Each subcommand has its own options which you can see in their help.
rclone serve <protocol> [opts] <remote> [flags]
Options
-h, --help help for serve
rclone serve http
Serve the remote over HTTP.
Synopsis
rclone serve http implements a basic web server to serve the remote over
HTTP. This can be viewed in a web browser or you can make a remote of
type http read from it.
You can use the filter flags (eg --include, --exclude) to control what
is served.
The server will log errors. Use -v to see access logs.
--bwlimit will be respected for file transfers. Use --stats to control
the stats printing.
Server options
Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.
If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.
--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.
--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.
Authentication
By default this will serve files without needing a login.
You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.
Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.
To create an htpasswd file:
touch htpasswd
htpasswd -B htpasswd user
htpasswd -B htpasswd anotherUser
The password file can be updated while rclone is running.
Use --realm to set the authentication realm.
SSL/TLS
By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.
--cert should be a either a PEM encoded certificate or a concatenation
of that with the CA certificate. --key should be the PEM encoded private
key and --client-ca should be the PEM encoded client certificate
authority certificate.
Directory Cache
Using the --dir-cache-time flag, you can set how long a directory should
be considered up to date and not refreshed from the backend. Changes
made locally in the mount may appear immediately or invalidate the
cache. However, changes done on the remote will only be picked up once
the cache expires.
Alternatively, you can send a SIGHUP signal to rclone for it to flush
all directory caches, regardless of how old they are. Assuming only one
rclone instance is running, you can reset the cache like this:
kill -SIGHUP $(pidof rclone)
If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:
rclone rc vfs/forget
Or individual files or directories:
rclone rc vfs/forget file=path/to/file dir=path/to/dir
File Caching
NB File caching is EXPERIMENTAL - use with care!
These flags control the VFS file caching options. The VFS layer is used
by rclone mount to make a cloud storage system work more like a normal
file system.
You'll need to enable VFS caching if you want, for example, to read and
write simultaneously to a file. See below for more details.
Note that the VFS cache works in addition to the cache backend and you
may find that you need one or the other or both.
--cache-dir string Directory rclone will use for caching.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.
The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.
Note that files are written back to the remote only when they are closed
so if rclone is quit or dies with open files then these won't get
written back to the remote. However they will still be in the on disk
cache.
--vfs-cache-mode off
In this mode the cache will read directly from the remote and write
directly to the remote without caching anything on disk.
This will mean some operations are not possible
- Files can't be opened for both read AND write
- Files opened for write can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files open for read with O_TRUNC will be opened write only
- Files open for write only will behave as if O_TRUNC was supplied
- Open modes O_APPEND, O_TRUNC are ignored
- If an upload fails it can't be retried
--vfs-cache-mode minimal
This is very similar to "off" except that files opened for read AND
write will be buffered to disks. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.
These operations are not possible
- Files opened for write only can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files opened for write only will ignore O_APPEND, O_TRUNC
- If an upload fails it can't be retried
--vfs-cache-mode writes
In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.
This mode should support all normal file system operations.
If an upload fails it will be retried up to --low-level-retries times.
--vfs-cache-mode full
In this mode all reads and writes are buffered to and from disk. When a
file is opened for read it will be downloaded in its entirety first.
This may be appropriate for your needs, or you may prefer to look at the
cache backend which does a much more sophisticated job of caching,
including caching directory hierarchies and chunks of files.
In this mode, unlike the others, when a file is written to the disk, it
will be kept on the disk after it is written to the remote. It will be
purged on a schedule according to --vfs-cache-max-age.
This mode should support all normal file system operations.
If an upload or download fails it will be retried up to
--low-level-retries times.
rclone serve http remote:path [flags]
Options
--addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080")
--cert string SSL PEM key (concatenation of certificate and CA certificate)
--client-ca string Client certificate authority to verify clients with
--dir-cache-time duration Time to cache directory entries for. (default 5m0s)
--gid uint32 Override the gid field set by the filesystem. (default 502)
-h, --help help for http
--htpasswd string htpasswd file - if not provided no authentication is done
--key string SSL PEM Private key
--max-header-bytes int Maximum size of request header (default 4096)
--no-checksum Don't compare checksums on up/download.
--no-modtime Don't read/write the modification time (can speed things up).
--no-seek Don't allow seeking in files.
--pass string Password for authentication.
--poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s)
--read-only Mount read-only.
--realm string realm for authentication (default "rclone")
--server-read-timeout duration Timeout for server reading data (default 1h0m0s)
--server-write-timeout duration Timeout for server writing data (default 1h0m0s)
--uid uint32 Override the uid field set by the filesystem. (default 502)
--umask int Override the permission bits set by the filesystem. (default 2)
--user string User name for authentication.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
--vfs-read-chunk-size int Read the source objects in chunks.
--vfs-read-chunk-size-limit int If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. -1 is unlimited.
rclone serve restic
Serve the remote for restic's REST API.
Synopsis
rclone serve restic implements restic's REST backend API over HTTP. This
allows restic to use rclone as a data storage mechanism for cloud
providers that restic does not support directly.
Restic is a command line program for doing backups.
The server will log errors. Use -v to see access logs.
--bwlimit will be respected for file transfers. Use --stats to control
the stats printing.
Setting up rclone for use by restic
First set up a remote for your chosen cloud provider.
Once you have set up the remote, check it is working with, for example
"rclone lsd remote:". You may have called the remote something other
than "remote:" - just substitute whatever you called it in the following
instructions.
Now start the rclone restic server
rclone serve restic -v remote:backup
Where you can replace "backup" in the above by whatever path in the
remote you wish to use.
By default this will serve on "localhost:8080" you can change this with
use of the "--addr" flag.
You might wish to start this server on boot.
Setting up restic to use rclone
Now you can follow the restic instructions on setting up restic.
Note that you will need restic 0.8.2 or later to interoperate with
rclone.
For the example above you will want to use "http://localhost:8080/" as
the URL for the REST server.
For example:
$ export RESTIC_REPOSITORY=rest:http://localhost:8080/
$ export RESTIC_PASSWORD=yourpassword
$ restic init
created restic backend 8b1a4b56ae at rest:http://localhost:8080/
Please note that knowledge of your password is required to access
the repository. Losing your password means that your data is
irrecoverably lost.
$ restic backup /path/to/files/to/backup
scan [/path/to/files/to/backup]
scanned 189 directories, 312 files in 0:00
[0:00] 100.00% 38.128 MiB / 38.128 MiB 501 / 501 items 0 errors ETA 0:00
duration: 0:00
snapshot 45c8fdd8 saved
Multiple repositories
Note that you can use the endpoint to host multiple repositories. Do
this by adding a directory name or path after the URL. Note that these
MUST end with /. Eg
$ export RESTIC_REPOSITORY=rest:http://localhost:8080/user1repo/
# backup user1 stuff
$ export RESTIC_REPOSITORY=rest:http://localhost:8080/user2repo/
# backup user2 stuff
Server options
Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.
If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.
--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.
--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.
Authentication
By default this will serve files without needing a login.
You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.
Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.
To create an htpasswd file:
touch htpasswd
htpasswd -B htpasswd user
htpasswd -B htpasswd anotherUser
The password file can be updated while rclone is running.
Use --realm to set the authentication realm.
SSL/TLS
By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.
--cert should be a either a PEM encoded certificate or a concatenation
of that with the CA certificate. --key should be the PEM encoded private
key and --client-ca should be the PEM encoded client certificate
authority certificate.
rclone serve restic remote:path [flags]
Options
--addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080")
--append-only disallow deletion of repository data
--cert string SSL PEM key (concatenation of certificate and CA certificate)
--client-ca string Client certificate authority to verify clients with
-h, --help help for restic
--htpasswd string htpasswd file - if not provided no authentication is done
--key string SSL PEM Private key
--max-header-bytes int Maximum size of request header (default 4096)
--pass string Password for authentication.
--realm string realm for authentication (default "rclone")
--server-read-timeout duration Timeout for server reading data (default 1h0m0s)
--server-write-timeout duration Timeout for server writing data (default 1h0m0s)
--stdio run an HTTP2 server on stdin/stdout
--user string User name for authentication.
rclone serve webdav
Serve remote:path over webdav.
Synopsis
rclone serve webdav implements a basic webdav server to serve the remote
over HTTP via the webdav protocol. This can be viewed with a webdav
client or you can make a remote of type webdav to read and write it.
NB at the moment each directory listing reads the start of each file
which is undesirable: see https://github.com/golang/go/issues/22577
Server options
Use --addr to specify which IP address and port the server should listen
on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By
default it only listens on localhost. You can use port :0 to let the OS
choose an available port.
If you set --addr to listen on a public or LAN accessible IP address
then using Authentication is advised - see the next section for info.
--server-read-timeout and --server-write-timeout can be used to control
the timeouts on the server. Note that this is the total time for a
transfer.
--max-header-bytes controls the maximum number of bytes the server will
accept in the HTTP header.
Authentication
By default this will serve files without needing a login.
You can either use an htpasswd file which can take lots of users, or set
a single username and password with the --user and --pass flags.
Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in
standard apache format and supports MD5, SHA1 and BCrypt for basic
authentication. Bcrypt is recommended.
To create an htpasswd file:
touch htpasswd
htpasswd -B htpasswd user
htpasswd -B htpasswd anotherUser
The password file can be updated while rclone is running.
Use --realm to set the authentication realm.
SSL/TLS
By default this will serve over http. If you want you can serve over
https. You will need to supply the --cert and --key flags. If you wish
to do client side certificate validation then you will need to supply
--client-ca also.
--cert should be a either a PEM encoded certificate or a concatenation
of that with the CA certificate. --key should be the PEM encoded private
key and --client-ca should be the PEM encoded client certificate
authority certificate.
Directory Cache
Using the --dir-cache-time flag, you can set how long a directory should
be considered up to date and not refreshed from the backend. Changes
made locally in the mount may appear immediately or invalidate the
cache. However, changes done on the remote will only be picked up once
the cache expires.
Alternatively, you can send a SIGHUP signal to rclone for it to flush
all directory caches, regardless of how old they are. Assuming only one
rclone instance is running, you can reset the cache like this:
kill -SIGHUP $(pidof rclone)
If you configure rclone with a remote control then you can use rclone rc
to flush the whole directory cache:
rclone rc vfs/forget
Or individual files or directories:
rclone rc vfs/forget file=path/to/file dir=path/to/dir
File Caching
NB File caching is EXPERIMENTAL - use with care!
These flags control the VFS file caching options. The VFS layer is used
by rclone mount to make a cloud storage system work more like a normal
file system.
You'll need to enable VFS caching if you want, for example, to read and
write simultaneously to a file. See below for more details.
Note that the VFS cache works in addition to the cache backend and you
may find that you need one or the other or both.
--cache-dir string Directory rclone will use for caching.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.
The cache has 4 different modes selected by --vfs-cache-mode. The higher
the cache mode the more compatible rclone becomes at the cost of using
disk space.
Note that files are written back to the remote only when they are closed
so if rclone is quit or dies with open files then these won't get
written back to the remote. However they will still be in the on disk
cache.
--vfs-cache-mode off
In this mode the cache will read directly from the remote and write
directly to the remote without caching anything on disk.
This will mean some operations are not possible
- Files can't be opened for both read AND write
- Files opened for write can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files open for read with O_TRUNC will be opened write only
- Files open for write only will behave as if O_TRUNC was supplied
- Open modes O_APPEND, O_TRUNC are ignored
- If an upload fails it can't be retried
--vfs-cache-mode minimal
This is very similar to "off" except that files opened for read AND
write will be buffered to disks. This means that files opened for write
will be a lot more compatible, but uses the minimal disk space.
These operations are not possible
- Files opened for write only can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files opened for write only will ignore O_APPEND, O_TRUNC
- If an upload fails it can't be retried
--vfs-cache-mode writes
In this mode files opened for read only are still read directly from the
remote, write only and read/write files are buffered to disk first.
This mode should support all normal file system operations.
If an upload fails it will be retried up to --low-level-retries times.
--vfs-cache-mode full
In this mode all reads and writes are buffered to and from disk. When a
file is opened for read it will be downloaded in its entirety first.
This may be appropriate for your needs, or you may prefer to look at the
cache backend which does a much more sophisticated job of caching,
including caching directory hierarchies and chunks of files.
In this mode, unlike the others, when a file is written to the disk, it
will be kept on the disk after it is written to the remote. It will be
purged on a schedule according to --vfs-cache-max-age.
This mode should support all normal file system operations.
If an upload or download fails it will be retried up to
--low-level-retries times.
rclone serve webdav remote:path [flags]
Options
--addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080")
--cert string SSL PEM key (concatenation of certificate and CA certificate)
--client-ca string Client certificate authority to verify clients with
--dir-cache-time duration Time to cache directory entries for. (default 5m0s)
--gid uint32 Override the gid field set by the filesystem. (default 502)
-h, --help help for webdav
--htpasswd string htpasswd file - if not provided no authentication is done
--key string SSL PEM Private key
--max-header-bytes int Maximum size of request header (default 4096)
--no-checksum Don't compare checksums on up/download.
--no-modtime Don't read/write the modification time (can speed things up).
--no-seek Don't allow seeking in files.
--pass string Password for authentication.
--poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s)
--read-only Mount read-only.
--realm string realm for authentication (default "rclone")
--server-read-timeout duration Timeout for server reading data (default 1h0m0s)
--server-write-timeout duration Timeout for server writing data (default 1h0m0s)
--uid uint32 Override the uid field set by the filesystem. (default 502)
--umask int Override the permission bits set by the filesystem. (default 2)
--user string User name for authentication.
--vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s)
--vfs-read-chunk-size int Read the source objects in chunks.
--vfs-read-chunk-size-limit int If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. -1 is unlimited.
rclone touch
Create new file or change file modification time.
Synopsis
Create new file or change file modification time.
rclone touch remote:path [flags]
Options
-h, --help help for touch
-C, --no-create Do not create the file if it does not exist.
-t, --timestamp string Change the modification times to the specified time instead of the current time of day. The argument is of the form 'YYMMDD' (ex. 17.10.30) or 'YYYY-MM-DDTHH:MM:SS' (ex. 2006-01-02T15:04:05)
rclone tree
List the contents of the remote in a tree like fashion.
Synopsis
rclone tree lists the contents of a remote in a similar way to the unix
tree command.
For example
$ rclone tree remote:path
/
├── file1
├── file2
├── file3
└── subdir
├── file4
└── file5
1 directories, 5 files
You can use any of the filtering options with the tree command (eg
--include and --exclude). You can also use --fast-list.
The tree command has many options for controlling the listing which are
compatible with the tree command. Note that not all of them have short
options as they conflict with rclone's short options.
rclone tree remote:path [flags]
Options
-a, --all All files are listed (list . files too).
-C, --color Turn colorization on always.
-d, --dirs-only List directories only.
--dirsfirst List directories before files (-U disables).
--full-path Print the full path prefix for each file.
-h, --help help for tree
--human Print the size in a more human readable way.
--level int Descend only level directories deep.
-D, --modtime Print the date of last modification.
-i, --noindent Don't print indentation lines.
--noreport Turn off file/directory count at end of tree listing.
-o, --output string Output to file instead of stdout.
-p, --protections Print the protections for each file.
-Q, --quote Quote filenames with double quotes.
-s, --size Print the size in bytes of each file.
--sort string Select sort: name,version,size,mtime,ctime.
--sort-ctime Sort files by last status change time.
-t, --sort-modtime Sort files by last modification time.
-r, --sort-reverse Reverse the order of the sort.
-U, --unsorted Leave files unsorted.
--version Sort files alphanumerically by version.
Copying single files
rclone normally syncs or copies directories. However, if the source
remote points to a file, rclone will just copy that file. The
destination remote must point to a directory - rclone will give the
error
Failed to create file system for "remote:file": is a file not a directory
if it isn't.
For example, suppose you have a remote with a file in called test.jpg,
then you could copy just that file like this
rclone copy remote:test.jpg /tmp/download
The file test.jpg will be placed inside /tmp/download.
This is equivalent to specifying
rclone copy --files-from /tmp/files remote: /tmp/download
Where /tmp/files contains the single line
test.jpg
It is recommended to use copy when copying individual files, not sync.
They have pretty much the same effect but copy will use a lot less
memory.
Quoting and the shell
When you are typing commands to your computer you are using something
called the command line shell. This interprets various characters in an
OS specific way.
Here are some gotchas which may help users unfamiliar with the shell
rules
Linux / OSX
If your names have spaces or shell metacharacters (eg *, ?, $, ', " etc)
then you must quote them. Use single quotes ' by default.
rclone copy 'Important files?' remote:backup
If you want to send a ' you will need to use ", eg
rclone copy "O'Reilly Reviews" remote:backup
The rules for quoting metacharacters are complicated and if you want the
full details you'll have to consult the manual page for your shell.
Windows
If your names have spaces in you need to put them in ", eg
rclone copy "E:\folder name\folder name\folder name" remote:backup
If you are using the root directory on its own then don't quote it (see
#464 for why), eg
rclone copy E:\ remote:backup
Copying files or directories with : in the names
rclone uses : to mark a remote name. This is, however, a valid filename
component in non-Windows OSes. The remote name parser will only search
for a : up to the first / so if you need to act on a file or directory
like this then use the full path starting with a /, or use ./ as a
current directory prefix.
So to sync a directory called sync:me to a remote called remote: use
rclone sync ./sync:me remote:path
or
rclone sync /full/path/to/sync:me remote:path
Server Side Copy
Most remotes (but not all - see the overview) support server side copy.
This means if you want to copy one folder to another then rclone won't
download all the files and re-upload them; it will instruct the server
to copy them in place.
Eg
rclone copy s3:oldbucket s3:newbucket
Will copy the contents of oldbucket to newbucket without downloading and
re-uploading.
Remotes which don't support server side copy WILL download and re-upload
in this case.
Server side copies are used with sync and copy and will be identified in
the log when using the -v flag. The move command may also use them if
remote doesn't support server side move directly. This is done by
issuing a server side copy then a delete which is much quicker than a
download and re-upload.
Server side copies will only be attempted if the remote names are the
same.
This can be used when scripting to make aged backups efficiently, eg
rclone sync remote:current-backup remote:previous-backup
rclone sync /path/to/files remote:current-backup
Options
Rclone has a number of options to control its behaviour.
Options which use TIME use the go time parser. A duration string is a
possibly signed sequence of decimal numbers, each with optional fraction
and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units
are "ns", "us" (or "µs"), "ms", "s", "m", "h".
Options which use SIZE use kByte by default. However, a suffix of b for
bytes, k for kBytes, M for MBytes, G for GBytes, T for TBytes and P for
PBytes may be used. These are the binary units, eg 1, 2**10, 2**20,
2**30 respectively.
--backup-dir=DIR
When using sync, copy or move any files which would have been
overwritten or deleted are moved in their original hierarchy into this
directory.
If --suffix is set, then the moved files will have the suffix added to
them. If there is a file with the same path (after the suffix has been
added) in DIR, then it will be overwritten.
The remote in use must support server side move or copy and you must use
the same remote as the destination of the sync. The backup directory
must not overlap the destination directory.
For example
rclone sync /path/to/local remote:current --backup-dir remote:old
will sync /path/to/local to remote:current, but for any files which
would have been updated or deleted will be stored in remote:old.
If running rclone from a script you might want to use today's date as
the directory name passed to --backup-dir to store the old files, or you
might want to pass --suffix with today's date.
--bind string
Local address to bind to for outgoing connections. This can be an IPv4
address (1.2.3.4), an IPv6 address (1234::789A) or host name. If the
host name doesn't resolve or resolves to more than one IP address it
will give an error.
--bwlimit=BANDWIDTH_SPEC
This option controls the bandwidth limit. Limits can be specified in two
ways: As a single limit, or as a timetable.
Single limits last for the duration of the session. To use a single
limit, specify the desired bandwidth in kBytes/s, or use a suffix
b|k|M|G. The default is 0 which means to not limit bandwidth.
For example, to limit bandwidth usage to 10 MBytes/s use --bwlimit 10M
It is also possible to specify a "timetable" of limits, which will cause
certain limits to be applied at certain times. To specify a timetable,
format your entries as "HH:MM,BANDWIDTH HH:MM,BANDWIDTH...".
An example of a typical timetable to avoid link saturation during
daytime working hours could be:
--bwlimit "08:00,512 12:00,10M 13:00,512 18:00,30M 23:00,off"
In this example, the transfer bandwidth will be set to 512kBytes/sec at
8am. At noon, it will raise to 10Mbytes/s, and drop back to
512kBytes/sec at 1pm. At 6pm, the bandwidth limit will be set to
30MBytes/s, and at 11pm it will be completely disabled (full speed).
Anything between 11pm and 8am will remain unlimited.
Bandwidth limits only apply to the data transfer. They don't apply to
the bandwidth of the directory listings etc.
Note that the units are Bytes/s, not Bits/s. Typically connections are
measured in Bits/s - to convert divide by 8. For example, let's say you
have a 10 Mbit/s connection and you wish rclone to use half of it - 5
Mbit/s. This is 5/8 = 0.625MByte/s so you would use a --bwlimit 0.625M
parameter for rclone.
On Unix systems (Linux, MacOS, …) the bandwidth limiter can be toggled
by sending a SIGUSR2 signal to rclone. This allows to remove the
limitations of a long running rclone transfer and to restore it back to
the value specified with --bwlimit quickly when needed. Assuming there
is only one rclone instance running, you can toggle the limiter like
this:
kill -SIGUSR2 $(pidof rclone)
If you configure rclone with a remote control then you can use change
the bwlimit dynamically:
rclone rc core/bwlimit rate=1M
--buffer-size=SIZE
Use this sized buffer to speed up file transfers. Each --transfer will
use this much memory for buffering.
Set to 0 to disable the buffering for the minimum memory usage.
--checkers=N
The number of checkers to run in parallel. Checkers do the equality
checking of files during a sync. For some storage systems (eg S3, Swift,
Dropbox) this can take a significant amount of time so they are run in
parallel.
The default is to run 8 checkers in parallel.
-c, --checksum
Normally rclone will look at modification time and size of files to see
if they are equal. If you set this flag then rclone will check the file
hash and size to determine if files are equal.
This is useful when the remote doesn't support setting modified time and
a more accurate sync is desired than just checking the file size.
This is very useful when transferring between remotes which store the
same hash type on the object, eg Drive and Swift. For details of which
remotes support which hash type see the table in the overview section.
Eg rclone --checksum sync s3:/bucket swift:/bucket would run much
quicker than without the --checksum flag.
When using this flag, rclone won't update mtimes of remote files if they
are incorrect as it would normally.
--config=CONFIG_FILE
Specify the location of the rclone config file.
Normally the config file is in your home directory as a file called
.config/rclone/rclone.conf (or .rclone.conf if created with an older
version). If $XDG_CONFIG_HOME is set it will be at
$XDG_CONFIG_HOME/rclone/rclone.conf
If you run rclone -h and look at the help for the --config option you
will see where the default location is for you.
Use this flag to override the config location, eg
rclone --config=".myconfig" .config.
--contimeout=TIME
Set the connection timeout. This should be in go time format which looks
like 5s for 5 seconds, 10m for 10 minutes, or 3h30m.
The connection timeout is the amount of time rclone will wait for a
connection to go through to a remote object storage system. It is 1m by
default.
--dedupe-mode MODE
Mode to run dedupe command in. One of interactive, skip, first, newest,
oldest, rename. The default is interactive. See the dedupe command for
more information as to what these options mean.
--disable FEATURE,FEATURE,...
This disables a comma separated list of optional features. For example
to disable server side move and server side copy use:
--disable move,copy
The features can be put in in any case.
To see a list of which features can be disabled use:
--disable help
See the overview features and optional features to get an idea of which
feature does what.
This flag can be useful for debugging and in exceptional circumstances
(eg Google Drive limiting the total volume of Server Side Copies to
100GB/day).
-n, --dry-run
Do a trial run with no permanent changes. Use this to see what rclone
would do without actually doing it. Useful when setting up the sync
command which deletes files in the destination.
--ignore-checksum
Normally rclone will check that the checksums of transferred files
match, and give an error "corrupted on transfer" if they don't.
You can use this option to skip that check. You should only use it if
you have had the "corrupted on transfer" error message and you are sure
you might want to transfer potentially corrupted data.
--ignore-existing
Using this option will make rclone unconditionally skip all files that
exist on the destination, no matter the content of these files.
While this isn't a generally recommended option, it can be useful in
cases where your files change due to encryption. However, it cannot
correct partial transfers in case a transfer was interrupted.
--ignore-size
Normally rclone will look at modification time and size of files to see
if they are equal. If you set this flag then rclone will check only the
modification time. If --checksum is set then it only checks the
checksum.
It will also cause rclone to skip verifying the sizes are the same after
transfer.
This can be useful for transferring files to and from OneDrive which
occasionally misreports the size of image files (see #399 for more
info).
-I, --ignore-times
Using this option will cause rclone to unconditionally upload all files
regardless of the state of files on the destination.
Normally rclone would skip any files that have the same modification
time and are the same size (or have the same checksum if using
--checksum).
--immutable
Treat source and destination files as immutable and disallow
modification.
With this option set, files will be created and deleted as requested,
but existing files will never be updated. If an existing file does not
match between the source and destination, rclone will give the error
Source and destination exist but do not match: immutable file modified.
Note that only commands which transfer files (e.g. sync, copy, move) are
affected by this behavior, and only modification is disallowed. Files
may still be deleted explicitly (e.g. delete, purge) or implicitly (e.g.
sync, move). Use copy --immutable if it is desired to avoid deletion as
well as modification.
This can be useful as an additional layer of protection for immutable or
append-only data sets (notably backup archives), where modification
implies corruption and should not be propagated.
--leave-root
During rmdirs it will not remove root directory, even if it's empty.
--log-file=FILE
Log all of rclone's output to FILE. This is not active by default. This
can be useful for tracking down problems with syncs in combination with
the -v flag. See the Logging section for more info.
Note that if you are using the logrotate program to manage rclone's
logs, then you should use the copytruncate option as rclone doesn't have
a signal to rotate logs.
--log-level LEVEL
This sets the log level for rclone. The default log level is NOTICE.
DEBUG is equivalent to -vv. It outputs lots of debug info - useful for
bug reports and really finding out what rclone is doing.
INFO is equivalent to -v. It outputs information about each transfer and
prints stats once a minute by default.
NOTICE is the default log level if no logging flags are supplied. It
outputs very little when things are working normally. It outputs
warnings and significant events.
ERROR is equivalent to -q. It only outputs error messages.
--low-level-retries NUMBER
This controls the number of low level retries rclone does.
A low level retry is used to retry a failing operation - typically one
HTTP request. This might be uploading a chunk of a big file for example.
You will see low level retries in the log with the -v flag.
This shouldn't need to be changed from the default in normal operations.
However, if you get a lot of low level retries you may wish to reduce
the value so rclone moves on to a high level retry (see the --retries
flag) quicker.
Disable low level retries with --low-level-retries 1.
--max-delete=N
This tells rclone not to delete more than N files. If that limit is
exceeded then a fatal error will be generated and rclone will stop the
operation in progress.
--max-depth=N
This modifies the recursion depth for all the commands except purge.
So if you do rclone --max-depth 1 ls remote:path you will see only the
files in the top level directory. Using --max-depth 2 means you will see
all the files in first two directory levels and so on.
For historical reasons the lsd command defaults to using a --max-depth
of 1 - you can override this with the command line flag.
You can use this command to disable recursion (with --max-depth 1).
Note that if you use this with sync and --delete-excluded the files not
recursed through are considered excluded and will be deleted on the
destination. Test first with --dry-run if you are not sure what will
happen.
--max-transfer=SIZE
Rclone will stop transferring when it has reached the size specified.
Defaults to off.
When the limit is reached all transfers will stop immediately.
Rclone will exit with exit code 8 if the transfer limit is reached.
--modify-window=TIME
When checking whether a file has been modified, this is the maximum
allowed time difference that a file can have and still be considered
equivalent.
The default is 1ns unless this is overridden by a remote. For example OS
X only stores modification times to the nearest second so if you are
reading and writing to an OS X filing system this will be 1s by default.
This command line flag allows you to override that computed default.
--no-gzip-encoding
Don't set Accept-Encoding: gzip. This means that rclone won't ask the
server for compressed files automatically. Useful if you've set the
server to return files with Content-Encoding: gzip but you uploaded
compressed files.
There is no need to set this in normal operation, and doing so will
decrease the network transfer efficiency of rclone.
--no-update-modtime
When using this flag, rclone won't update modification times of remote
files if they are incorrect as it would normally.
This can be used if the remote is being synced with another tool also
(eg the Google Drive client).
-q, --quiet
Normally rclone outputs stats and a completion message. If you set this
flag it will make as little output as possible.
--retries int
Retry the entire sync if it fails this many times it fails (default 3).
Some remotes can be unreliable and a few retries help pick up the files
which didn't get transferred because of errors.
Disable retries with --retries 1.
--retries-sleep=TIME
This sets the interval between each retry specified by --retries
The default is 0. Use 0 to disable.
--size-only
Normally rclone will look at modification time and size of files to see
if they are equal. If you set this flag then rclone will check only the
size.
This can be useful transferring files from Dropbox which have been
modified by the desktop sync client which doesn't set checksums of
modification times in the same way as rclone.
--stats=TIME
Commands which transfer data (sync, copy, copyto, move, moveto) will
print data transfer stats at regular intervals to show their progress.
This sets the interval.
The default is 1m. Use 0 to disable.
If you set the stats interval then all commands can show stats. This can
be useful when running other commands, check or mount for example.
Stats are logged at INFO level by default which means they won't show at
default log level NOTICE. Use --stats-log-level NOTICE or -v to make
them show. See the Logging section for more info on log levels.
Note that on macOS you can send a SIGINFO (which is normally ctrl-T in
the terminal) to make the stats print immediately.
--stats-file-name-length integer
By default, the --stats output will truncate file names and paths longer
than 40 characters. This is equivalent to providing
--stats-file-name-length 40. Use --stats-file-name-length 0 to disable
any truncation of file names printed by stats.
--stats-log-level string
Log level to show --stats output at. This can be DEBUG, INFO, NOTICE, or
ERROR. The default is INFO. This means at the default level of logging
which is NOTICE the stats won't show - if you want them to then use
--stats-log-level NOTICE. See the Logging section for more info on log
levels.
--stats-unit=bits|bytes
By default, data transfer rates will be printed in bytes/second.
This option allows the data rate to be printed in bits/second.
Data transfer volume will still be reported in bytes.
The rate is reported as a binary unit, not SI unit. So 1 Mbit/s equals
1,048,576 bits/s and not 1,000,000 bits/s.
The default is bytes.
--suffix=SUFFIX
This is for use with --backup-dir only. If this isn't set then
--backup-dir will move files with their original name. If it is set then
the files will have SUFFIX added on to them.
See --backup-dir for more info.
--syslog
On capable OSes (not Windows or Plan9) send all log output to syslog.
This can be useful for running rclone in a script or rclone mount.
--syslog-facility string
If using --syslog this sets the syslog facility (eg KERN, USER). See
man syslog for a list of possible facilities. The default facility is
DAEMON.
--tpslimit float
Limit HTTP transactions per second to this. Default is 0 which is used
to mean unlimited transactions per second.
For example to limit rclone to 10 HTTP transactions per second use
--tpslimit 10, or to 1 transaction every 2 seconds use --tpslimit 0.5.
Use this when the number of transactions per second from rclone is
causing a problem with the cloud storage provider (eg getting you banned
or rate limited).
This can be very useful for rclone mount to control the behaviour of
applications using it.
See also --tpslimit-burst.
--tpslimit-burst int
Max burst of transactions for --tpslimit. (default 1)
Normally --tpslimit will do exactly the number of transaction per second
specified. However if you supply --tps-burst then rclone can save up
some transactions from when it was idle giving a burst of up to the
parameter supplied.
For example if you provide --tpslimit-burst 10 then if rclone has been
idle for more than 10*--tpslimit then it can do 10 transactions very
quickly before they are limited again.
This may be used to increase performance of --tpslimit without changing
the long term average number of transactions per second.
--track-renames
By default, rclone doesn't keep track of renamed files, so if you rename
a file locally then sync it to a remote, rclone will delete the old file
on the remote and upload a new copy.
If you use this flag, and the remote supports server side copy or server
side move, and the source and destination have a compatible hash, then
this will track renames during sync, copy, and move operations and
perform renaming server-side.
Files will be matched by size and hash - if both match then a rename
will be considered.
If the destination does not support server-side copy or move, rclone
will fall back to the default behaviour and log an error level message
to the console.
Note that --track-renames uses extra memory to keep track of all the
rename candidates.
Note also that --track-renames is incompatible with --delete-before and
will select --delete-after instead of --delete-during.
--delete-(before,during,after)
This option allows you to specify when files on your destination are
deleted when you sync folders.
Specifying the value --delete-before will delete all files present on
the destination, but not on the source _before_ starting the transfer of
any new or updated files. This uses two passes through the file systems,
one for the deletions and one for the copies.
Specifying --delete-during will delete files while checking and
uploading files. This is the fastest option and uses the least memory.
Specifying --delete-after (the default value) will delay deletion of
files until all new/updated files have been successfully transferred.
The files to be deleted are collected in the copy pass then deleted
after the copy pass has completed successfully. The files to be deleted
are held in memory so this mode may use more memory. This is the safest
mode as it will only delete files if there have been no errors
subsequent to that. If there have been errors before the deletions start
then you will get the message
not deleting files as there were IO errors.
--fast-list
When doing anything which involves a directory listing (eg sync, copy,
ls - in fact nearly every command), rclone normally lists a directory
and processes it before using more directory lists to process any
subdirectories. This can be parallelised and works very quickly using
the least amount of memory.
However, some remotes have a way of listing all files beneath a
directory in one (or a small number) of transactions. These tend to be
the bucket based remotes (eg S3, B2, GCS, Swift, Hubic).
If you use the --fast-list flag then rclone will use this method for
listing directories. This will have the following consequences for the
listing:
- It WILL use fewer transactions (important if you pay for them)
- It WILL use more memory. Rclone has to load the whole listing into
memory.
- It _may_ be faster because it uses fewer transactions
- It _may_ be slower because it can't be parallelized
rclone should always give identical results with and without
--fast-list.
If you pay for transactions and can fit your entire sync listing into
memory then --fast-list is recommended. If you have a very big sync to
do then don't use --fast-list otherwise you will run out of memory.
If you use --fast-list on a remote which doesn't support it, then rclone
will just ignore it.
--timeout=TIME
This sets the IO idle timeout. If a transfer has started but then
becomes idle for this long it is considered broken and disconnected.
The default is 5m. Set to 0 to disable.
--transfers=N
The number of file transfers to run in parallel. It can sometimes be
useful to set this to a smaller number if the remote is giving a lot of
timeouts or bigger if you have lots of bandwidth and a fast remote.
The default is to run 4 file transfers in parallel.
-u, --update
This forces rclone to skip any files which exist on the destination and
have a modified time that is newer than the source file.
If an existing destination file has a modification time equal (within
the computed modify window precision) to the source file's, it will be
updated if the sizes are different.
On remotes which don't support mod time directly the time checked will
be the uploaded time. This means that if uploading to one of these
remotes, rclone will skip any files which exist on the destination and
have an uploaded time that is newer than the modification time of the
source file.
This can be useful when transferring to a remote which doesn't support
mod times directly as it is more accurate than a --size-only check and
faster than using --checksum.
--use-server-modtime
Some object-store backends (e.g, Swift, S3) do not preserve file
modification times (modtime). On these backends, rclone stores the
original modtime as additional metadata on the object. By default it
will make an API call to retrieve the metadata when the modtime is
needed by an operation.
Use this flag to disable the extra API call and rely instead on the
server's modified time. In cases such as a local to remote sync, knowing
the local file is newer than the time it was last uploaded to the remote
is sufficient. In those cases, this flag can speed up the process and
reduce the number of API calls necessary.
-v, -vv, --verbose
With -v rclone will tell you about each file that is transferred and a
small number of significant events.
With -vv rclone will become very verbose telling you about every file it
considers and transfers. Please send bug reports with a log with this
setting.
-V, --version
Prints the version number
Configuration Encryption
Your configuration file contains information for logging in to your
cloud services. This means that you should keep your .rclone.conf file
in a secure location.
If you are in an environment where that isn't possible, you can add a
password to your configuration. This means that you will have to enter
the password every time you start rclone.
To add a password to your rclone configuration, execute rclone config.
>rclone config
Current remotes:
e) Edit existing remote
n) New remote
d) Delete remote
s) Set configuration password
q) Quit config
e/n/d/s/q>
Go into s, Set configuration password:
e/n/d/s/q> s
Your configuration is not encrypted.
If you add a password, you will protect your login information to cloud services.
a) Add Password
q) Quit to main menu
a/q> a
Enter NEW configuration password:
password:
Confirm NEW password:
password:
Password set
Your configuration is encrypted.
c) Change Password
u) Unencrypt configuration
q) Quit to main menu
c/u/q>
Your configuration is now encrypted, and every time you start rclone you
will now be asked for the password. In the same menu, you can change the
password or completely remove encryption from your configuration.
There is no way to recover the configuration if you lose your password.
rclone uses nacl secretbox which in turn uses XSalsa20 and Poly1305 to
encrypt and authenticate your configuration with secret-key
cryptography. The password is SHA-256 hashed, which produces the key for
secretbox. The hashed password is not stored.
While this provides very good security, we do not recommend storing your
encrypted rclone configuration in public if it contains sensitive
information, maybe except if you use a very strong password.
If it is safe in your environment, you can set the RCLONE_CONFIG_PASS
environment variable to contain your password, in which case it will be
used for decrypting the configuration.
You can set this for a session from a script. For unix like systems save
this to a file called set-rclone-password:
#!/bin/echo Source this file don't run it
read -s RCLONE_CONFIG_PASS
export RCLONE_CONFIG_PASS
Then source the file when you want to use it. From the shell you would
do source set-rclone-password. It will then ask you for the password and
set it in the environment variable.
If you are running rclone inside a script, you might want to disable
password prompts. To do that, pass the parameter --ask-password=false to
rclone. This will make rclone fail instead of asking for a password if
RCLONE_CONFIG_PASS doesn't contain a valid password.
Developer options
These options are useful when developing or debugging rclone. There are
also some more remote specific options which aren't documented here
which are used for testing. These start with remote name eg
--drive-test-option - see the docs for the remote in question.
--cpuprofile=FILE
Write CPU profile to file. This can be analysed with go tool pprof.
--dump flag,flag,flag
The --dump flag takes a comma separated list of flags to dump info
about. These are:
--dump headers
Dump HTTP headers with Authorization: lines removed. May still contain
sensitive info. Can be very verbose. Useful for debugging only.
Use --dump auth if you do want the Authorization: headers.
--dump bodies
Dump HTTP headers and bodies - may contain sensitive info. Can be very
verbose. Useful for debugging only.
Note that the bodies are buffered in memory so don't use this for
enormous files.
--dump requests
Like --dump bodies but dumps the request bodies and the response
headers. Useful for debugging download problems.
--dump responses
Like --dump bodies but dumps the response bodies and the request
headers. Useful for debugging upload problems.
--dump auth
Dump HTTP headers - will contain sensitive info such as Authorization:
headers - use --dump headers to dump without Authorization: headers. Can
be very verbose. Useful for debugging only.
--dump filters
Dump the filters to the output. Useful to see exactly what include and
exclude options are filtering on.
--dump goroutines
This dumps a list of the running go-routines at the end of the command
to standard output.
--dump openfiles
This dumps a list of the open files at the end of the command. It uses
the lsof command to do that so you'll need that installed to use it.
--memprofile=FILE
Write memory profile to file. This can be analysed with go tool pprof.
--no-check-certificate=true/false
--no-check-certificate controls whether a client verifies the server's
certificate chain and host name. If --no-check-certificate is true, TLS
accepts any certificate presented by the server and any host name in
that certificate. In this mode, TLS is susceptible to man-in-the-middle
attacks.
This option defaults to false.
THIS SHOULD BE USED ONLY FOR TESTING.
Filtering
For the filtering options
- --delete-excluded
- --filter
- --filter-from
- --exclude
- --exclude-from
- --include
- --include-from
- --files-from
- --min-size
- --max-size
- --min-age
- --max-age
- --dump filters
See the filtering section.
Remote control
For the remote control options and for instructions on how to remote
control rclone
- --rc
- and anything starting with --rc-
See the remote control section.
Logging
rclone has 4 levels of logging, ERROR, NOTICE, INFO and DEBUG.
By default, rclone logs to standard error. This means you can redirect
standard error and still see the normal output of rclone commands (eg
rclone ls).
By default, rclone will produce Error and Notice level messages.
If you use the -q flag, rclone will only produce Error messages.
If you use the -v flag, rclone will produce Error, Notice and Info
messages.
If you use the -vv flag, rclone will produce Error, Notice, Info and
Debug messages.
You can also control the log levels with the --log-level flag.
If you use the --log-file=FILE option, rclone will redirect Error, Info
and Debug messages along with standard error to FILE.
If you use the --syslog flag then rclone will log to syslog and the
--syslog-facility control which facility it uses.
Rclone prefixes all log messages with their level in capitals, eg INFO
which makes it easy to grep the log file for different kinds of
information.
Exit Code
If any errors occur during the command execution, rclone will exit with
a non-zero exit code. This allows scripts to detect when rclone
operations have failed.
During the startup phase, rclone will exit immediately if an error is
detected in the configuration. There will always be a log message
immediately before exiting.
When rclone is running it will accumulate errors as it goes along, and
only exit with a non-zero exit code if (after retries) there were still
failed transfers. For every error counted there will be a high priority
log message (visible with -q) showing the message and which file caused
the problem. A high priority message is also shown when starting a retry
so the user can see that any previous error messages may not be valid
after the retry. If rclone has done a retry it will log a high priority
message if the retry was successful.
List of exit codes
- 0 - success
- 1 - Syntax or usage error
- 2 - Error not otherwise categorised
- 3 - Directory not found
- 4 - File not found
- 5 - Temporary error (one that more retries might fix) (Retry errors)
- 6 - Less serious errors (like 461 errors from dropbox) (NoRetry
errors)
- 7 - Fatal error (one that more retries won't fix, like account
suspended) (Fatal errors)
- 8 - Transfer exceeded - limit set by --max-transfer reached
Environment Variables
Rclone can be configured entirely using environment variables. These can
be used to set defaults for options or config file entries.
Options
Every option in rclone can have its default set by environment variable.
To find the name of the environment variable, first, take the long
option name, strip the leading --, change - to _, make upper case and
prepend RCLONE_.
For example, to always set --stats 5s, set the environment variable
RCLONE_STATS=5s. If you set stats on the command line this will override
the environment variable setting.
Or to always use the trash in drive --drive-use-trash, set
RCLONE_DRIVE_USE_TRASH=true.
The same parser is used for the options and the environment variables so
they take exactly the same form.
Config file
You can set defaults for values in the config file on an individual
remote basis. If you want to use this feature, you will need to discover
the name of the config items that you want. The easiest way is to run
through rclone config by hand, then look in the config file to see what
the values are (the config file can be found by looking at the help for
--config in rclone help).
To find the name of the environment variable, you need to set, take
RCLONE_CONFIG_ + name of remote + _ + name of config file option and
make it all uppercase.
For example, to configure an S3 remote named mys3: without a config file
(using unix ways of setting environment variables):
$ export RCLONE_CONFIG_MYS3_TYPE=s3
$ export RCLONE_CONFIG_MYS3_ACCESS_KEY_ID=XXX
$ export RCLONE_CONFIG_MYS3_SECRET_ACCESS_KEY=XXX
$ rclone lsd MYS3:
-1 2016-09-21 12:54:21 -1 my-bucket
$ rclone listremotes | grep mys3
mys3:
Note that if you want to create a remote using environment variables you
must create the ..._TYPE variable as above.
Other environment variables
- RCLONE_CONFIG_PASS` set to contain your config file password (see
Configuration Encryption section)
- HTTP_PROXY, HTTPS_PROXY and NO_PROXY (or the lowercase versions
thereof).
- HTTPS_PROXY takes precedence over HTTP_PROXY for https requests.
- The environment values may be either a complete URL or a
"host[:port]" for, in which case the "http" scheme is assumed.
CONFIGURING RCLONE ON A REMOTE / HEADLESS MACHINE
Some of the configurations (those involving oauth2) require an Internet
connected web browser.
If you are trying to set rclone up on a remote or headless box with no
browser available on it (eg a NAS or a server in a datacenter) then you
will need to use an alternative means of configuration. There are two
ways of doing it, described below.
Configuring using rclone authorize
On the headless box
...
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> n
For this to work, you will need rclone available on a machine that has a web browser available.
Execute the following on your machine:
rclone authorize "amazon cloud drive"
Then paste the result below:
result>
Then on your main desktop machine
rclone authorize "amazon cloud drive"
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
Paste the following into your remote machine --->
SECRET_TOKEN
<---End paste
Then back to the headless box, paste in the code
result> SECRET_TOKEN
--------------------
[acd12]
client_id =
client_secret =
token = SECRET_TOKEN
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d>
Configuring by copying the config file
Rclone stores all of its config in a single configuration file. This can
easily be copied to configure a remote rclone.
So first configure rclone on your desktop machine
rclone config
to set up the config file.
Find the config file by running rclone -h and looking for the help for
the --config option
$ rclone -h
[snip]
--config="/home/user/.rclone.conf": Config file.
[snip]
Now transfer it to the remote box (scp, cut paste, ftp, sftp etc) and
place it in the correct place (use rclone -h on the remote box to find
out where).
FILTERING, INCLUDES AND EXCLUDES
Rclone has a sophisticated set of include and exclude rules. Some of
these are based on patterns and some on other things like file size.
The filters are applied for the copy, sync, move, ls, lsl, md5sum,
sha1sum, size, delete and check operations. Note that purge does not
obey the filters.
Each path as it passes through rclone is matched against the include and
exclude rules like --include, --exclude, --include-from, --exclude-from,
--filter, or --filter-from. The simplest way to try them out is using
the ls command, or --dry-run together with -v.
Patterns
The patterns used to match files for inclusion or exclusion are based on
"file globs" as used by the unix shell.
If the pattern starts with a / then it only matches at the top level of
the directory tree, RELATIVE TO THE ROOT OF THE REMOTE (not necessarily
the root of the local drive). If it doesn't start with / then it is
matched starting at the END OF THE PATH, but it will only match a
complete path element:
file.jpg - matches "file.jpg"
- matches "directory/file.jpg"
- doesn't match "afile.jpg"
- doesn't match "directory/afile.jpg"
/file.jpg - matches "file.jpg" in the root directory of the remote
- doesn't match "afile.jpg"
- doesn't match "directory/file.jpg"
IMPORTANT Note that you must use / in patterns and not \ even if running
on Windows.
A * matches anything but not a /.
*.jpg - matches "file.jpg"
- matches "directory/file.jpg"
- doesn't match "file.jpg/something"
Use ** to match anything, including slashes (/).
dir/** - matches "dir/file.jpg"
- matches "dir/dir1/dir2/file.jpg"
- doesn't match "directory/file.jpg"
- doesn't match "adir/file.jpg"
A ? matches any character except a slash /.
l?ss - matches "less"
- matches "lass"
- doesn't match "floss"
A [ and ] together make a a character class, such as [a-z] or [aeiou] or
[[:alpha:]]. See the go regexp docs for more info on these.
h[ae]llo - matches "hello"
- matches "hallo"
- doesn't match "hullo"
A { and } define a choice between elements. It should contain a comma
separated list of patterns, any of which might match. These patterns can
contain wildcards.
{one,two}_potato - matches "one_potato"
- matches "two_potato"
- doesn't match "three_potato"
- doesn't match "_potato"
Special characters can be escaped with a \ before them.
\*.jpg - matches "*.jpg"
\\.jpg - matches "\.jpg"
\[one\].jpg - matches "[one].jpg"
Note also that rclone filter globs can only be used in one of the filter
command line flags, not in the specification of the remote, so
rclone copy "remote:dir*.jpg" /path/to/dir won't work - what is required
is rclone --include "*.jpg" copy remote:dir /path/to/dir
Directories
Rclone keeps track of directories that could match any file patterns.
Eg if you add the include rule
/a/*.jpg
Rclone will synthesize the directory include rule
/a/
If you put any rules which end in / then it will only match directories.
Directory matches are ONLY used to optimise directory access patterns -
you must still match the files that you want to match. Directory matches
won't optimise anything on bucket based remotes (eg s3, swift, google
compute storage, b2) which don't have a concept of directory.
Differences between rsync and rclone patterns
Rclone implements bash style {a,b,c} glob matching which rsync doesn't.
Rclone always does a wildcard match so \ must always escape a \.
How the rules are used
Rclone maintains a combined list of include rules and exclude rules.
Each file is matched in order, starting from the top, against the rule
in the list until it finds a match. The file is then included or
excluded according to the rule type.
If the matcher fails to find a match after testing against all the
entries in the list then the path is included.
For example given the following rules, + being include, - being exclude,
- secret*.jpg
+ *.jpg
+ *.png
+ file2.avi
- *
This would include
- file1.jpg
- file3.png
- file2.avi
This would exclude
- secret17.jpg
- non *.jpg and *.png
A similar process is done on directory entries before recursing into
them. This only works on remotes which have a concept of directory (Eg
local, google drive, onedrive, amazon drive) and not on bucket based
remotes (eg s3, swift, google compute storage, b2).
Adding filtering rules
Filtering rules are added with the following command line flags.
Repeating options
You can repeat the following options to add more than one rule of that
type.
- --include
- --include-from
- --exclude
- --exclude-from
- --filter
- --filter-from
IMPORTANT You should not use --include* together with --exclude*. It may
produce different results than you expected. In that case try to use:
--filter*.
Note that all the options of the same type are processed together in the
order above, regardless of what order they were placed on the command
line.
So all --include options are processed first in the order they appeared
on the command line, then all --include-from options etc.
To mix up the order includes and excludes, the --filter flag can be
used.
--exclude - Exclude files matching pattern
Add a single exclude rule with --exclude.
This flag can be repeated. See above for the order the flags are
processed in.
Eg --exclude *.bak to exclude all bak files from the sync.
--exclude-from - Read exclude patterns from file
Add exclude rules from a file.
This flag can be repeated. See above for the order the flags are
processed in.
Prepare a file like this exclude-file.txt
# a sample exclude rule file
*.bak
file2.jpg
Then use as --exclude-from exclude-file.txt. This will sync all files
except those ending in bak and file2.jpg.
This is useful if you have a lot of rules.
--include - Include files matching pattern
Add a single include rule with --include.
This flag can be repeated. See above for the order the flags are
processed in.
Eg --include *.{png,jpg} to include all png and jpg files in the backup
and no others.
This adds an implicit --exclude * at the very end of the filter list.
This means you can mix --include and --include-from with the other
filters (eg --exclude) but you must include all the files you want in
the include statement. If this doesn't provide enough flexibility then
you must use --filter-from.
--include-from - Read include patterns from file
Add include rules from a file.
This flag can be repeated. See above for the order the flags are
processed in.
Prepare a file like this include-file.txt
# a sample include rule file
*.jpg
*.png
file2.avi
Then use as --include-from include-file.txt. This will sync all jpg, png
files and file2.avi.
This is useful if you have a lot of rules.
This adds an implicit --exclude * at the very end of the filter list.
This means you can mix --include and --include-from with the other
filters (eg --exclude) but you must include all the files you want in
the include statement. If this doesn't provide enough flexibility then
you must use --filter-from.
--filter - Add a file-filtering rule
This can be used to add a single include or exclude rule. Include rules
start with + and exclude rules start with -. A special rule called ! can
be used to clear the existing rules.
This flag can be repeated. See above for the order the flags are
processed in.
Eg --filter "- *.bak" to exclude all bak files from the sync.
--filter-from - Read filtering patterns from a file
Add include/exclude rules from a file.
This flag can be repeated. See above for the order the flags are
processed in.
Prepare a file like this filter-file.txt
# a sample filter rule file
- secret*.jpg
+ *.jpg
+ *.png
+ file2.avi
- /dir/Trash/**
+ /dir/**
# exclude everything else
- *
Then use as --filter-from filter-file.txt. The rules are processed in
the order that they are defined.
This example will include all jpg and png files, exclude any files
matching secret*.jpg and include file2.avi. It will also include
everything in the directory dir at the root of the sync, except
dir/Trash which it will exclude. Everything else will be excluded from
the sync.
--files-from - Read list of source-file names
This reads a list of file names from the file passed in and ONLY these
files are transferred. The FILTERING RULES ARE IGNORED completely if you
use this option.
This option can be repeated to read from more than one file. These are
read in the order that they are placed on the command line.
Paths within the --files-from file will be interpreted as starting with
the root specified in the command. Leading / characters are ignored.
For example, suppose you had files-from.txt with this content:
# comment
file1.jpg
subdir/file2.jpg
You could then use it like this:
rclone copy --files-from files-from.txt /home/me/pics remote:pics
This will transfer these files only (if they exist)
/home/me/pics/file1.jpg → remote:pics/file1.jpg
/home/me/pics/subdir/file2.jpg → remote:pics/subdirfile1.jpg
To take a more complicated example, let's say you had a few files you
want to back up regularly with these absolute paths:
/home/user1/important
/home/user1/dir/file
/home/user2/stuff
To copy these you'd find a common subdirectory - in this case /home and
put the remaining files in files-from.txt with or without leading /, eg
user1/important
user1/dir/file
user2/stuff
You could then copy these to a remote like this
rclone copy --files-from files-from.txt /home remote:backup
The 3 files will arrive in remote:backup with the paths as in the
files-from.txt like this:
/home/user1/important → remote:backup/user1/important
/home/user1/dir/file → remote:backup/user1/dir/file
/home/user2/stuff → remote:backup/stuff
You could of course choose / as the root too in which case your
files-from.txt might look like this.
/home/user1/important
/home/user1/dir/file
/home/user2/stuff
And you would transfer it like this
rclone copy --files-from files-from.txt / remote:backup
In this case there will be an extra home directory on the remote:
/home/user1/important → remote:home/backup/user1/important
/home/user1/dir/file → remote:home/backup/user1/dir/file
/home/user2/stuff → remote:home/backup/stuff
--min-size - Don't transfer any file smaller than this
This option controls the minimum size file which will be transferred.
This defaults to kBytes but a suffix of k, M, or G can be used.
For example --min-size 50k means no files smaller than 50kByte will be
transferred.
--max-size - Don't transfer any file larger than this
This option controls the maximum size file which will be transferred.
This defaults to kBytes but a suffix of k, M, or G can be used.
For example --max-size 1G means no files larger than 1GByte will be
transferred.
--max-age - Don't transfer any file older than this
This option controls the maximum age of files to transfer. Give in
seconds or with a suffix of:
- ms - Milliseconds
- s - Seconds
- m - Minutes
- h - Hours
- d - Days
- w - Weeks
- M - Months
- y - Years
For example --max-age 2d means no files older than 2 days will be
transferred.
--min-age - Don't transfer any file younger than this
This option controls the minimum age of files to transfer. Give in
seconds or with a suffix (see --max-age for list of suffixes)
For example --min-age 2d means no files younger than 2 days will be
transferred.
--delete-excluded - Delete files on dest excluded from sync
IMPORTANT this flag is dangerous - use with --dry-run and -v first.
When doing rclone sync this will delete any files which are excluded
from the sync on the destination.
If for example you did a sync from A to B without the --min-size 50k
flag
rclone sync A: B:
Then you repeated it like this with the --delete-excluded
rclone --min-size 50k --delete-excluded sync A: B:
This would delete all files on B which are less than 50 kBytes as these
are now excluded from the sync.
Always test first with --dry-run and -v before using this flag.
--dump filters - dump the filters to the output
This dumps the defined filters to the output as regular expressions.
Useful for debugging.
Quoting shell metacharacters
The examples above may not work verbatim in your shell as they have
shell metacharacters in them (eg *), and may require quoting.
Eg linux, OSX
- --include \*.jpg
- --include '*.jpg'
- --include='*.jpg'
In Windows the expansion is done by the command not the shell so this
should work fine
- --include *.jpg
Exclude directory based on a file
It is possible to exclude a directory based on a file, which is present
in this directory. Filename should be specified using the
--exclude-if-present flag. This flag has a priority over the other
filtering flags.
Imagine, you have the following directory structure:
dir1/file1
dir1/dir2/file2
dir1/dir2/dir3/file3
dir1/dir2/dir3/.ignore
You can exclude dir3 from sync by running the following command:
rclone sync --exclude-if-present .ignore dir1 remote:backup
Currently only one filename is supported, i.e. --exclude-if-present
should not be used multiple times.
REMOTE CONTROLLING RCLONE
If rclone is run with the --rc flag then it starts an http server which
can be used to remote control rclone.
NB this is experimental and everything here is subject to change!
Supported parameters
--rc
Flag to start the http server listen on remote requests
--rc-addr=IP
IPaddress:Port or :Port to bind server to. (default "localhost:5572")
--rc-cert=KEY
SSL PEM key (concatenation of certificate and CA certificate)
--rc-client-ca=PATH
Client certificate authority to verify clients with
--rc-htpasswd=PATH
htpasswd file - if not provided no authentication is done
--rc-key=PATH
SSL PEM Private key
--rc-max-header-bytes=VALUE
Maximum size of request header (default 4096)
--rc-user=VALUE
User name for authentication.
--rc-pass=VALUE
Password for authentication.
--rc-realm=VALUE
Realm for authentication (default "rclone")
--rc-server-read-timeout=DURATION
Timeout for server reading data (default 1h0m0s)
--rc-server-write-timeout=DURATION
Timeout for server writing data (default 1h0m0s)
Accessing the remote control via the rclone rc command
Rclone itself implements the remote control protocol in its rclone rc
command.
You can use it like this
$ rclone rc rc/noop param1=one param2=two
{
"param1": "one",
"param2": "two"
}
Run rclone rc on its own to see the help for the installed remote
control commands.
Supported commands
cache/expire: Purge a remote from cache
Purge a remote from the cache backend. Supports either a directory or a
file. Params: - remote = path to remote (required) - withData =
true/false to delete cached data (chunks) as well (optional)
Eg
rclone rc cache/expire remote=path/to/sub/folder/
rclone rc cache/expire remote=/ withData=true
cache/stats: Get cache stats
Show statistics for the cache remote.
core/bwlimit: Set the bandwidth limit.
This sets the bandwidth limit to that passed in.
Eg
rclone rc core/bwlimit rate=1M
rclone rc core/bwlimit rate=off
The format of the parameter is exactly the same as passed to --bwlimit
except only one bandwidth may be specified.
core/gc: Runs a garbage collection.
This tells the go runtime to do a garbage collection run. It isn't
necessary to call this normally, but it can be useful for debugging
memory problems.
core/memstats: Returns the memory statistics
This returns the memory statistics of the running program. What the
values mean are explained in the go docs:
https://golang.org/pkg/runtime/#MemStats
The most interesting values for most people are:
- HeapAlloc: This is the amount of memory rclone is actually using
- HeapSys: This is the amount of memory rclone has obtained from the
OS
- Sys: this is the total amount of memory requested from the OS
- It is virtual memory so may include unused memory
core/pid: Return PID of current process
This returns PID of current process. Useful for stopping rclone process.
rc/error: This returns an error
This returns an error with the input as part of its error string. Useful
for testing error handling.
rc/list: List all the registered remote control commands
This lists all the registered remote control commands as a JSON map in
the commands response.
rc/noop: Echo the input to the output parameters
This echoes the input parameters to the output parameters for testing
purposes. It can be used to check that rclone is still alive and to
check that parameter passing is working properly.
vfs/forget: Forget files or directories in the directory cache.
This forgets the paths in the directory cache causing them to be re-read
from the remote when needed.
If no paths are passed in then it will forget all the paths in the
directory cache.
rclone rc vfs/forget
Otherwise pass files or dirs in as file=path or dir=path. Any parameter
key starting with file will forget that file and any starting with dir
will forget that dir, eg
rclone rc vfs/forget file=hello file2=goodbye dir=home/junk
Accessing the remote control via HTTP
Rclone implements a simple HTTP based protocol.
Each endpoint takes an JSON object and returns a JSON object or an
error. The JSON objects are essentially a map of string names to values.
All calls must made using POST.
The input objects can be supplied using URL parameters, POST parameters
or by supplying "Content-Type: application/json" and a JSON blob in the
body. There are examples of these below using curl.
The response will be a JSON blob in the body of the response. This is
formatted to be reasonably human readable.
If an error occurs then there will be an HTTP error status (usually 400)
and the body of the response will contain a JSON encoded error object.
Using POST with URL parameters only
curl -X POST 'http://localhost:5572/rc/noop/?potato=1&sausage=2'
Response
{
"potato": "1",
"sausage": "2"
}
Here is what an error response looks like:
curl -X POST 'http://localhost:5572/rc/error/?potato=1&sausage=2'
{
"error": "arbitrary error on input map[potato:1 sausage:2]",
"input": {
"potato": "1",
"sausage": "2"
}
}
Note that curl doesn't return errors to the shell unless you use the -f
option
$ curl -f -X POST 'http://localhost:5572/rc/error/?potato=1&sausage=2'
curl: (22) The requested URL returned error: 400 Bad Request
$ echo $?
22
Using POST with a form
curl --data "potato=1" --data "sausage=2" http://localhost:5572/rc/noop/
Response
{
"potato": "1",
"sausage": "2"
}
Note that you can combine these with URL parameters too with the POST
parameters taking precedence.
curl --data "potato=1" --data "sausage=2" "http://localhost:5572/rc/noop/?rutabaga=3&sausage=4"
Response
{
"potato": "1",
"rutabaga": "3",
"sausage": "4"
}
Using POST with a JSON blob
curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' http://localhost:5572/rc/noop/
response
{
"password": "xyz",
"username": "xyz"
}
This can be combined with URL parameters too if required. The JSON blob
takes precedence.
curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' 'http://localhost:5572/rc/noop/?rutabaga=3&potato=4'
{
"potato": 2,
"rutabaga": "3",
"sausage": 1
}
Debugging rclone with pprof
If you use the --rc flag this will also enable the use of the go
profiling tools on the same port.
To use these, first install go.
Then (for example) to profile rclone's memory use you can run:
go tool pprof -web http://localhost:5572/debug/pprof/heap
This should open a page in your browser showing what is using what
memory.
You can also use the -text flag to produce a textual summary
$ go tool pprof -text http://localhost:5572/debug/pprof/heap
Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
flat flat% sum% cum cum%
1024.03kB 66.62% 66.62% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.addDecoderNode
513kB 33.38% 100% 513kB 33.38% net/http.newBufioWriterSize
0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/cmd/all.init
0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/cmd/serve.init
0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/cmd/serve/restic.init
0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2.init
0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.init
0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.init.0
0 0% 100% 1024.03kB 66.62% main.init
0 0% 100% 513kB 33.38% net/http.(*conn).readRequest
0 0% 100% 513kB 33.38% net/http.(*conn).serve
0 0% 100% 1024.03kB 66.62% runtime.main
Possible profiles to look at:
- Memory: go tool pprof http://localhost:5572/debug/pprof/heap
- 30-second CPU profile:
go tool pprof http://localhost:5572/debug/pprof/profile
- 5-second execution trace:
wget http://localhost:5572/debug/pprof/trace?seconds=5
See the net/http/pprof docs for more info on how to use the profiling
and for a general overview see the Go team's blog post on profiling go
programs.
The profiling hook is zero overhead unless it is used.
OVERVIEW OF CLOUD STORAGE SYSTEMS
Each cloud storage system is slightly different. Rclone attempts to
provide a unified interface to them, but some underlying differences
show through.
Features
Here is an overview of the major features of each cloud storage system.
Name Hash ModTime Case Insensitive Duplicate Files MIME Type
------------------------------ ------------- --------- ------------------ ----------------- -----------
Amazon Drive MD5 No Yes No R
Amazon S3 MD5 Yes No No R/W
Backblaze B2 SHA1 Yes No No R/W
Box SHA1 Yes Yes No -
Dropbox DBHASH † Yes Yes No -
FTP - No No No -
Google Cloud Storage MD5 Yes No No R/W
Google Drive MD5 Yes No Yes R/W
HTTP - No No No R
Hubic MD5 Yes No No R/W
Mega - No No Yes -
Microsoft Azure Blob Storage MD5 Yes No No R/W
Microsoft OneDrive SHA1 ‡‡ Yes Yes No R
OpenDrive MD5 Yes Yes No -
Openstack Swift MD5 Yes No No R/W
pCloud MD5, SHA1 Yes No No W
QingStor MD5 No No No R/W
SFTP MD5, SHA1 ‡ Yes Depends No -
WebDAV - Yes †† Depends No -
Yandex Disk MD5 Yes No No R/W
The local filesystem All Yes Depends No -
Hash
The cloud storage system supports various hash types of the objects. The
hashes are used when transferring data as an integrity check and can be
specifically used with the --checksum flag in syncs and in the check
command.
To use the verify checksums when transferring between cloud storage
systems they must support a common hash type.
† Note that Dropbox supports its own custom hash. This is an SHA256 sum
of all the 4MB block SHA256s.
‡ SFTP supports checksums if the same login has shell access and md5sum
or sha1sum as well as echo are in the remote's PATH.
†† WebDAV supports modtimes when used with Owncloud and Nextcloud only.
‡‡ Microsoft OneDrive Personal supports SHA1 hashes, whereas OneDrive
for business and SharePoint server support Microsoft's own QuickXorHash.
ModTime
The cloud storage system supports setting modification times on objects.
If it does then this enables a using the modification times as part of
the sync. If not then only the size will be checked by default, though
the MD5SUM can be checked with the --checksum flag.
All cloud storage systems support some kind of date on the object and
these will be set when transferring from the cloud storage system.
Case Insensitive
If a cloud storage systems is case sensitive then it is possible to have
two files which differ only in case, eg file.txt and FILE.txt. If a
cloud storage system is case insensitive then that isn't possible.
This can cause problems when syncing between a case insensitive system
and a case sensitive system. The symptom of this is that no matter how
many times you run the sync it never completes fully.
The local filesystem and SFTP may or may not be case sensitive depending
on OS.
- Windows - usually case insensitive, though case is preserved
- OSX - usually case insensitive, though it is possible to format case
sensitive
- Linux - usually case sensitive, but there are case insensitive file
systems (eg FAT formatted USB keys)
Most of the time this doesn't cause any problems as people tend to avoid
files whose name differs only by case even on case sensitive systems.
Duplicate files
If a cloud storage system allows duplicate files then it can have two
objects with the same name.
This confuses rclone greatly when syncing - use the rclone dedupe
command to rename or remove duplicates.
MIME Type
MIME types (also known as media types) classify types of documents using
a simple text classification, eg text/html or application/pdf.
Some cloud storage systems support reading (R) the MIME type of objects
and some support writing (W) the MIME type of objects.
The MIME type can be important if you are serving files directly to HTTP
from the storage system.
If you are copying from a remote which supports reading (R) to a remote
which supports writing (W) then rclone will preserve the MIME types.
Otherwise they will be guessed from the extension, or the remote itself
may assign the MIME type.
Optional Features
All the remotes support a basic set of features, but there are some
optional features supported by some remotes used to make some operations
more efficient.
Name Purge Copy Move DirMove CleanUp ListR StreamUpload LinkSharing About
------------------------------ ------- ------ ------ --------- --------- ------- -------------- ------------- -------
Amazon Drive Yes No Yes Yes No #575 No No No #2178 No
Amazon S3 No Yes No No No Yes Yes No #2178 No
Backblaze B2 No No No No Yes Yes Yes No #2178 No
Box Yes Yes Yes Yes No #575 No Yes No #2178 No
Dropbox Yes Yes Yes Yes No #575 No Yes Yes Yes
FTP No No Yes Yes No No Yes No #2178 No
Google Cloud Storage Yes Yes No No No Yes Yes No #2178 No
Google Drive Yes Yes Yes Yes Yes No Yes Yes Yes
HTTP No No No No No No No No #2178 No
Hubic Yes † Yes No No No Yes Yes No #2178 Yes
Mega Yes No Yes Yes No No No No #2178 Yes
Microsoft Azure Blob Storage Yes Yes No No No Yes No No #2178 No
Microsoft OneDrive Yes Yes Yes No #197 No #575 No No No #2178 Yes
OpenDrive Yes Yes Yes Yes No No No No No
Openstack Swift Yes † Yes No No No Yes Yes No #2178 Yes
pCloud Yes Yes Yes Yes Yes No No No #2178 Yes
QingStor No Yes No No No Yes No No #2178 No
SFTP No No Yes Yes No No Yes No #2178 No
WebDAV Yes Yes Yes Yes No No Yes ‡ No #2178 No
Yandex Disk Yes No No No Yes Yes Yes No #2178 No
The local filesystem Yes No Yes Yes No No Yes No Yes
Purge
This deletes a directory quicker than just deleting all the files in the
directory.
† Note Swift and Hubic implement this in order to delete directory
markers but they don't actually have a quicker way of deleting files
other than deleting them individually.
‡ StreamUpload is not supported with Nextcloud
Copy
Used when copying an object to and from the same remote. This known as a
server side copy so you can copy a file without downloading it and
uploading it again. It is used if you use rclone copy or rclone move if
the remote doesn't support Move directly.
If the server doesn't support Copy directly then for copy operations the
file is downloaded then re-uploaded.
Move
Used when moving/renaming an object on the same remote. This is known as
a server side move of a file. This is used in rclone move if the server
doesn't support DirMove.
If the server isn't capable of Move then rclone simulates it with Copy
then delete. If the server doesn't support Copy then rclone will
download the file and re-upload it.
DirMove
This is used to implement rclone move to move a directory if possible.
If it isn't then it will use Move on each file (which falls back to Copy
then download and upload - see Move section).
CleanUp
This is used for emptying the trash for a remote by rclone cleanup.
If the server can't do CleanUp then rclone cleanup will return an error.
ListR
The remote supports a recursive list to list all the contents beneath a
directory quickly. This enables the --fast-list flag to work. See the
rclone docs for more details.
StreamUpload
Some remotes allow files to be uploaded without knowing the file size in
advance. This allows certain operations to work without spooling the
file to local disk first, e.g. rclone rcat.
LinkSharing
Sets the necessary permissions on a file or folder and prints a link
that allows others to access them, even if they don't have an account on
the particular cloud provider.
About
This is used to fetch quota information from the remote, like bytes
used/free/quota and bytes used in the trash.
If the server can't do About then rclone about will return an error.
Alias
The alias remote provides a new name for another remote.
Paths may be as deep as required or a local path, eg
remote:directory/subdirectory or /directory/subdirectory.
During the initial setup with rclone config you will specify the target
remote. The target remote can either be a local path or another remote.
Subfolders can be used in target remote. Asume a alias remote named
backup with the target mydrive:private/backup. Invoking
rclone mkdir backup:desktop is exactly the same as invoking
rclone mkdir mydrive:private/backup/desktop.
There will be no special handling of paths containing .. segments.
Invoking rclone mkdir backup:../desktop is exactly the same as invoking
rclone mkdir mydrive:private/backup/../desktop. The empty path is not
allowed as a remote. To alias the current directory use . instead.
Here is an example of how to make a alias called remote for local
folder. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Alias for a existing remote
\ "alias"
2 / Amazon Drive
\ "amazon cloud drive"
3 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
4 / Backblaze B2
\ "b2"
5 / Box
\ "box"
6 / Cache a remote
\ "cache"
7 / Dropbox
\ "dropbox"
8 / Encrypt/Decrypt a remote
\ "crypt"
9 / FTP Connection
\ "ftp"
10 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
11 / Google Drive
\ "drive"
12 / Hubic
\ "hubic"
13 / Local Disk
\ "local"
14 / Microsoft Azure Blob Storage
\ "azureblob"
15 / Microsoft OneDrive
\ "onedrive"
16 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
17 / Pcloud
\ "pcloud"
18 / QingCloud Object Storage
\ "qingstor"
19 / SSH/SFTP Connection
\ "sftp"
20 / Webdav
\ "webdav"
21 / Yandex Disk
\ "yandex"
22 / http Connection
\ "http"
Storage> 1
Remote or path to alias.
Can be "myremote:path/to/dir", "myremote:bucket", "myremote:" or "/local/path".
remote> /mnt/storage/backup
Remote config
--------------------
[remote]
remote = /mnt/storage/backup
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Current remotes:
Name Type
==== ====
remote alias
e) Edit existing remote
n) New remote
d) Delete remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
e/n/d/r/c/s/q> q
Once configured you can then use rclone like this,
List directories in top level in /mnt/storage/backup
rclone lsd remote:
List all the files in /mnt/storage/backup
rclone ls remote:
Copy another local directory to the alias directory called source
rclone copy /home/source remote:source
Amazon Drive
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
The initial setup for Amazon Drive involves getting a token from Amazon
which you need to do in your browser. rclone config walks you through
it.
The configuration process for Amazon Drive may involve using an oauth
proxy. This is used to keep the Amazon credentials out of the source
code. The proxy runs in Google's very secure App Engine environment and
doesn't store any credentials which pass through it.
NB rclone doesn't not currently have its own Amazon Drive credentials
(see the forum for why) so you will either need to have your own
client_id and client_secret with Amazon Drive, or use a a third party
ouath proxy in which case you will need to enter client_id,
client_secret, auth_url and token_url.
Note also if you are not using Amazon's auth_url and token_url, (ie you
filled in something for those) then if setting up on a remote machine
you can only use the copying the config method of configuration -
rclone authorize will not work.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
n/r/c/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / FTP Connection
\ "ftp"
7 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
8 / Google Drive
\ "drive"
9 / Hubic
\ "hubic"
10 / Local Disk
\ "local"
11 / Microsoft OneDrive
\ "onedrive"
12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
13 / SSH/SFTP Connection
\ "sftp"
14 / Yandex Disk
\ "yandex"
Storage> 1
Amazon Application Client Id - required.
client_id> your client ID goes here
Amazon Application Client Secret - required.
client_secret> your client secret goes here
Auth server URL - leave blank to use Amazon's.
auth_url> Optional auth URL
Token server url - leave blank to use Amazon's.
token_url> Optional token URL
Remote config
Make sure your Redirect URL is set to "http://127.0.0.1:53682/" in your custom config.
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
client_id = your client ID goes here
client_secret = your client secret goes here
auth_url = Optional auth URL
token_url = Optional token URL
token = {"access_token":"xxxxxxxxxxxxxxxxxxxxxxx","token_type":"bearer","refresh_token":"xxxxxxxxxxxxxxxxxx","expiry":"2015-09-06T16:07:39.658438471+01:00"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See the remote setup docs for how to set it up on a machine with no
Internet browser available.
Note that rclone runs a webserver on your local machine to collect the
token as returned from Amazon. This only runs from the moment it opens
your browser to the moment you get back the verification code. This is
on http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall.
Once configured you can then use rclone like this,
List directories in top level of your Amazon Drive
rclone lsd remote:
List all the files in your Amazon Drive
rclone ls remote:
To copy a local directory to an Amazon Drive directory called backup
rclone copy /home/source remote:backup
Modified time and MD5SUMs
Amazon Drive doesn't allow modification times to be changed via the API
so these won't be accurate or used for syncing.
It does store MD5SUMs so for a more accurate sync, you can use the
--checksum flag.
Deleting files
Any files you delete with rclone will end up in the trash. Amazon don't
provide an API to permanently delete files, nor to empty the trash, so
you will have to do that with one of Amazon's apps or via the Amazon
Drive website. As of November 17, 2016, files are automatically deleted
by Amazon from the trash after 30 days.
Using with non .com Amazon accounts
Let's say you usually use amazon.co.uk. When you authenticate with
rclone it will take you to an amazon.com page to log in. Your
amazon.co.uk email and password should work here just fine.
Specific options
Here are the command line options specific to this cloud storage system.
--acd-templink-threshold=SIZE
Files this size or more will be downloaded via their tempLink. This is
to work around a problem with Amazon Drive which blocks downloads of
files bigger than about 10GB. The default for this is 9GB which
shouldn't need to be changed.
To download files above this threshold, rclone requests a tempLink which
downloads the file through a temporary URL directly from the underlying
S3 storage.
--acd-upload-wait-per-gb=TIME
Sometimes Amazon Drive gives an error when a file has been fully
uploaded but the file appears anyway after a little while. This happens
sometimes for files over 1GB in size and nearly every time for files
bigger than 10GB. This parameter controls the time rclone waits for the
file to appear.
The default value for this parameter is 3 minutes per GB, so by default
it will wait 3 minutes for every GB uploaded to see if the file appears.
You can disable this feature by setting it to 0. This may cause conflict
errors as rclone retries the failed upload but the file will most likely
appear correctly eventually.
These values were determined empirically by observing lots of uploads of
big files for a range of file sizes.
Upload with the -v flag to see more info about what rclone is doing in
this situation.
Limitations
Note that Amazon Drive is case insensitive so you can't have a file
called "Hello.doc" and one called "hello.doc".
Amazon Drive has rate limiting so you may notice errors in the sync (429
errors). rclone will automatically retry the sync up to 3 times by
default (see --retries flag) which should hopefully work around this
problem.
Amazon Drive has an internal limit of file sizes that can be uploaded to
the service. This limit is not officially published, but all files
larger than this will fail.
At the time of writing (Jan 2016) is in the area of 50GB per file. This
means that larger files are likely to fail.
Unfortunately there is no way for rclone to see that this failure is
because of file size, so it will retry the operation, as any other
failure. To avoid this problem, use --max-size 50000M option to limit
the maximum size of uploaded files. Note that --max-size does not split
files into segments, it only ignores files over this size.
Amazon S3 Storage Providers
The S3 backend can be used with a number of different providers:
- AWS S3
- Ceph
- DigitalOcean Spaces
- Dreamhost
- IBM COS S3
- Minio
- Wasabi
Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, eg remote:bucket/path/to/dir.
Once you have made a remote (see the provider specific section above)
you can use it like this:
See all buckets
rclone lsd remote:
Make a new bucket
rclone mkdir remote:bucket
List the contents of a bucket
rclone ls remote:bucket
Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.
rclone sync /home/local/directory remote:bucket
AWS S3
Here is an example of making an s3 configuration. First run
rclone config
This will guide you through an interactive setup process.
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Alias for a existing remote
\ "alias"
2 / Amazon Drive
\ "amazon cloud drive"
3 / Amazon S3 Compliant Storage Providers (AWS, Ceph, Dreamhost, IBM COS, Minio)
\ "s3"
4 / Backblaze B2
\ "b2"
[snip]
23 / http Connection
\ "http"
Storage> s3
Choose your S3 provider.
Choose a number from below, or type in your own value
1 / Amazon Web Services (AWS) S3
\ "AWS"
2 / Ceph Object Storage
\ "Ceph"
3 / Digital Ocean Spaces
\ "DigitalOcean"
4 / Dreamhost DreamObjects
\ "Dreamhost"
5 / IBM COS S3
\ "IBMCOS"
6 / Minio Object Storage
\ "Minio"
7 / Wasabi Object Storage
\ "Wasabi"
8 / Any other S3 compatible provider
\ "Other"
provider> 1
Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
1 / Enter AWS credentials in the next step
\ "false"
2 / Get AWS credentials from the environment (env vars or IAM)
\ "true"
env_auth> 1
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> XXX
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> YYY
Region to connect to.
Choose a number from below, or type in your own value
/ The default endpoint - a good choice if you are unsure.
1 | US Region, Northern Virginia or Pacific Northwest.
| Leave location constraint empty.
\ "us-east-1"
/ US East (Ohio) Region
2 | Needs location constraint us-east-2.
\ "us-east-2"
/ US West (Oregon) Region
3 | Needs location constraint us-west-2.
\ "us-west-2"
/ US West (Northern California) Region
4 | Needs location constraint us-west-1.
\ "us-west-1"
/ Canada (Central) Region
5 | Needs location constraint ca-central-1.
\ "ca-central-1"
/ EU (Ireland) Region
6 | Needs location constraint EU or eu-west-1.
\ "eu-west-1"
/ EU (London) Region
7 | Needs location constraint eu-west-2.
\ "eu-west-2"
/ EU (Frankfurt) Region
8 | Needs location constraint eu-central-1.
\ "eu-central-1"
/ Asia Pacific (Singapore) Region
9 | Needs location constraint ap-southeast-1.
\ "ap-southeast-1"
/ Asia Pacific (Sydney) Region
10 | Needs location constraint ap-southeast-2.
\ "ap-southeast-2"
/ Asia Pacific (Tokyo) Region
11 | Needs location constraint ap-northeast-1.
\ "ap-northeast-1"
/ Asia Pacific (Seoul)
12 | Needs location constraint ap-northeast-2.
\ "ap-northeast-2"
/ Asia Pacific (Mumbai)
13 | Needs location constraint ap-south-1.
\ "ap-south-1"
/ South America (Sao Paulo) Region
14 | Needs location constraint sa-east-1.
\ "sa-east-1"
region> 1
Endpoint for S3 API.
Leave blank if using AWS to use the default endpoint for the region.
endpoint>
Location constraint - must be set to match the Region. Used when creating buckets only.
Choose a number from below, or type in your own value
1 / Empty for US Region, Northern Virginia or Pacific Northwest.
\ ""
2 / US East (Ohio) Region.
\ "us-east-2"
3 / US West (Oregon) Region.
\ "us-west-2"
4 / US West (Northern California) Region.
\ "us-west-1"
5 / Canada (Central) Region.
\ "ca-central-1"
6 / EU (Ireland) Region.
\ "eu-west-1"
7 / EU (London) Region.
\ "eu-west-2"
8 / EU Region.
\ "EU"
9 / Asia Pacific (Singapore) Region.
\ "ap-southeast-1"
10 / Asia Pacific (Sydney) Region.
\ "ap-southeast-2"
11 / Asia Pacific (Tokyo) Region.
\ "ap-northeast-1"
12 / Asia Pacific (Seoul)
\ "ap-northeast-2"
13 / Asia Pacific (Mumbai)
\ "ap-south-1"
14 / South America (Sao Paulo) Region.
\ "sa-east-1"
location_constraint> 1
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
1 / Owner gets FULL_CONTROL. No one else has access rights (default).
\ "private"
2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access.
\ "public-read"
/ Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
3 | Granting this on a bucket is generally not recommended.
\ "public-read-write"
4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access.
\ "authenticated-read"
/ Object owner gets FULL_CONTROL. Bucket owner gets READ access.
5 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
\ "bucket-owner-read"
/ Both the object owner and the bucket owner get FULL_CONTROL over the object.
6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
\ "bucket-owner-full-control"
acl> 1
The server-side encryption algorithm used when storing this object in S3.
Choose a number from below, or type in your own value
1 / None
\ ""
2 / AES256
\ "AES256"
server_side_encryption> 1
The storage class to use when storing objects in S3.
Choose a number from below, or type in your own value
1 / Default
\ ""
2 / Standard storage class
\ "STANDARD"
3 / Reduced redundancy storage class
\ "REDUCED_REDUNDANCY"
4 / Standard Infrequent Access storage class
\ "STANDARD_IA"
5 / One Zone Infrequent Access storage class
\ "ONEZONE_IA"
storage_class> 1
Remote config
--------------------
[remote]
type = s3
provider = AWS
env_auth = false
access_key_id = XXX
secret_access_key = YYY
region = us-east-1
endpoint =
location_constraint =
acl = private
server_side_encryption =
storage_class =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d>
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
--update and --use-server-modtime
As noted below, the modified time is stored on metadata on the object.
It is used by default for all operations that require checking the time
a file was last updated. It allows rclone to treat the remote more like
a true filesystem, but it is inefficient because it requires an extra
API call to retrieve the metadata.
For many operations, the time the object was last uploaded to the remote
is sufficient to determine if it is "dirty". By using --update along
with --use-server-modtime, you can avoid the extra API call and simply
upload files whose local modtime is newer than the time it was last
uploaded.
Modified time
The modified time is stored as metadata on the object as
X-Amz-Meta-Mtime as floating point since the epoch accurate to 1 ns.
Multipart uploads
rclone supports multipart uploads with S3 which means that it can upload
files bigger than 5GB. Note that files uploaded _both_ with multipart
upload _and_ through crypt remotes do not have MD5 sums.
Buckets and Regions
With Amazon S3 you can list buckets (rclone lsd) using any region, but
you can only access the content of a bucket from the region it was
created in. If you attempt to access a bucket from the wrong region, you
will get an error, incorrect region, the bucket is not in 'XXX' region.
Authentication
There are a number of ways to supply rclone with a set of AWS
credentials, with and without using the environment.
The different authentication methods are tried in this order:
- Directly in the rclone configuration file (env_auth = false in the
config file):
- access_key_id and secret_access_key are required.
- session_token can be optionally set when using AWS STS.
- Runtime configuration (env_auth = true in the config file):
- Export the following environment variables before running rclone:
- Access Key ID: AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY
- Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY
- Session Token: AWS_SESSION_TOKEN (optional)
- Or, use a named profile:
- Profile files are standard files used by AWS CLI tools
- By default it will use the profile in your home directory (eg
~/.aws/credentials on unix based systems) file and the "default"
profile, to change set these environment variables:
- AWS_SHARED_CREDENTIALS_FILE to control which file.
- AWS_PROFILE to control which profile to use.
- Or, run rclone in an ECS task with an IAM role (AWS only).
- Or, run rclone on an EC2 instance with an IAM role (AWS only).
If none of these option actually end up providing rclone with AWS
credentials then S3 interaction will be non-authenticated (see below).
S3 Permissions
When using the sync subcommand of rclone the following minimum
permissions are required to be available on the bucket being written to:
- ListBucket
- DeleteObject
- GetObject
- PutObject
- PutObjectACL
Example policy:
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": {
"AWS": "arn:aws:iam::USER_SID:user/USER_NAME"
},
"Action": [
"s3:ListBucket",
"s3:DeleteObject",
"s3:GetObject",
"s3:PutObject",
"s3:PutObjectAcl"
],
"Resource": [
"arn:aws:s3:::BUCKET_NAME/*",
"arn:aws:s3:::BUCKET_NAME"
]
}
]
}
Notes on above:
1. This is a policy that can be used when creating bucket. It assumes
that USER_NAME has been created.
2. The Resource entry must include both resource ARNs, as one implies
the bucket and the other implies the bucket's objects.
For reference, here's an Ansible script that will generate one or more
buckets that will work with rclone sync.
Key Management System (KMS)
If you are using server side encryption with KMS then you will find you
can't transfer small objects. As a work-around you can use the
--ignore-checksum flag.
A proper fix is being worked on in issue #1824.
Glacier
You can transition objects to glacier storage using a lifecycle policy.
The bucket can still be synced or copied into normally, but if rclone
tries to access the data you will see an error like below.
2017/09/11 19:07:43 Failed to sync: failed to open source object: Object in GLACIER, restore first: path/to/file
In this case you need to restore the object(s) in question before using
rclone.
Specific options
Here are the command line options specific to this cloud storage system.
--s3-acl=STRING
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit the canned ACL docs.
--s3-storage-class=STRING
Storage class to upload new objects with.
Available options include:
- STANDARD - default storage class
- STANDARD_IA - for less frequently accessed data (e.g backups)
- ONEZONE_IA - for storing data in only one Availability Zone
- REDUCED_REDUNDANCY (only for noncritical, reproducible data, has
lower redundancy)
--s3-chunk-size=SIZE
Any files larger than this will be uploaded in chunks of this size. The
default is 5MB. The minimum is 5MB.
Note that 2 chunks of this size are buffered in memory per transfer.
If you are transferring large files over high speed links and you have
enough memory, then increasing this will speed up the transfers.
--s3-upload-concurrency
Number of chunks of the same file that are uploaded concurrently.
Default is 2.
If you are uploading small amount of large file over high speed link and
these uploads do not fully utilize your bandwidth, then increasing this
may help to speed up the transfers.
Anonymous access to public buckets
If you want to use rclone to access a public bucket, configure with a
blank access_key_id and secret_access_key. Your config should end up
looking like this:
[anons3]
type = s3
provider = AWS
env_auth = false
access_key_id =
secret_access_key =
region = us-east-1
endpoint =
location_constraint =
acl = private
server_side_encryption =
storage_class =
Then use it as normal with the name of the public bucket, eg
rclone lsd anons3:1000genomes
You will be able to list and copy data but not upload it.
Ceph
Ceph is an open source unified, distributed storage system designed for
excellent performance, reliability and scalability. It has an S3
compatible object storage interface.
To use rclone with Ceph, configure as above but leave the region blank
and set the endpoint. You should end up with something like this in your
config:
[ceph]
type = s3
provider = Ceph
env_auth = false
access_key_id = XXX
secret_access_key = YYY
region =
endpoint = https://ceph.endpoint.example.com
location_constraint =
acl =
server_side_encryption =
storage_class =
Note also that Ceph sometimes puts / in the passwords it gives users. If
you read the secret access key using the command line tools you will get
a JSON blob with the / escaped as \/. Make sure you only write / in the
secret access key.
Eg the dump from Ceph looks something like this (irrelevant keys
removed).
{
"user_id": "xxx",
"display_name": "xxxx",
"keys": [
{
"user": "xxx",
"access_key": "xxxxxx",
"secret_key": "xxxxxx\/xxxx"
}
],
}
Because this is a json dump, it is encoding the / as \/, so if you use
the secret key as xxxxxx/xxxx it will work fine.
Dreamhost
Dreamhost DreamObjects is an object storage system based on CEPH.
To use rclone with Dreamhost, configure as above but leave the region
blank and set the endpoint. You should end up with something like this
in your config:
[dreamobjects]
type = s3
provider = DreamHost
env_auth = false
access_key_id = your_access_key
secret_access_key = your_secret_key
region =
endpoint = objects-us-west-1.dream.io
location_constraint =
acl = private
server_side_encryption =
storage_class =
DigitalOcean Spaces
Spaces is an S3-interoperable object storage service from cloud provider
DigitalOcean.
To connect to DigitalOcean Spaces you will need an access key and secret
key. These can be retrieved on the "Applications & API" page of the
DigitalOcean control panel. They will be needed when promted by
rclone config for your access_key_id and secret_access_key.
When prompted for a region or location_constraint, press enter to use
the default value. The region must be included in the endpoint setting
(e.g. nyc3.digitaloceanspaces.com). The defualt values can be used for
other settings.
Going through the whole process of creating a new remote by running
rclone config, each prompt should be answered as shown below:
Storage> s3
env_auth> 1
access_key_id> YOUR_ACCESS_KEY
secret_access_key> YOUR_SECRET_KEY
region>
endpoint> nyc3.digitaloceanspaces.com
location_constraint>
acl>
storage_class>
The resulting configuration file should look like:
[spaces]
type = s3
provider = DigitalOcean
env_auth = false
access_key_id = YOUR_ACCESS_KEY
secret_access_key = YOUR_SECRET_KEY
region =
endpoint = nyc3.digitaloceanspaces.com
location_constraint =
acl =
server_side_encryption =
storage_class =
Once configured, you can create a new Space and begin copying files. For
example:
rclone mkdir spaces:my-new-space
rclone copy /path/to/files spaces:my-new-space
IBM COS (S3)
Information stored with IBM Cloud Object Storage is encrypted and
dispersed across multiple geographic locations, and accessed through an
implementation of the S3 API. This service makes use of the distributed
storage technologies provided by IBM’s Cloud Object Storage System
(formerly Cleversafe). For more information visit:
(http://www.ibm.com/cloud/object-storage)
To configure access to IBM COS S3, follow the steps below:
1. Run rclone config and select n for a new remote.
2018/02/14 14:13:11 NOTICE: Config file "C:\\Users\\a\\.config\\rclone\\rclone.conf" not found - using defaults
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
2. Enter the name for the configuration
name> <YOUR NAME>
3. Select "s3" storage.
Choose a number from below, or type in your own value
1 / Alias for a existing remote
\ "alias"
2 / Amazon Drive
\ "amazon cloud drive"
3 / Amazon S3 Complaint Storage Providers (Dreamhost, Ceph, Minio, IBM COS)
\ "s3"
4 / Backblaze B2
\ "b2"
[snip]
23 / http Connection
\ "http"
Storage> 3
4. Select IBM COS as the S3 Storage Provider.
Choose the S3 provider.
Choose a number from below, or type in your own value
1 / Choose this option to configure Storage to AWS S3
\ "AWS"
2 / Choose this option to configure Storage to Ceph Systems
\ "Ceph"
3 / Choose this option to configure Storage to Dreamhost
\ "Dreamhost"
4 / Choose this option to the configure Storage to IBM COS S3
\ "IBMCOS"
5 / Choose this option to the configure Storage to Minio
\ "Minio"
Provider>4
5. Enter the Access Key and Secret.
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> <>
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> <>
6. Specify the endpoint for IBM COS. For Public IBM COS, choose from
the option below. For On Premise IBM COS, enter an enpoint address.
Endpoint for IBM COS S3 API.
Specify if using an IBM COS On Premise.
Choose a number from below, or type in your own value
1 / US Cross Region Endpoint
\ "s3-api.us-geo.objectstorage.softlayer.net"
2 / US Cross Region Dallas Endpoint
\ "s3-api.dal.us-geo.objectstorage.softlayer.net"
3 / US Cross Region Washington DC Endpoint
\ "s3-api.wdc-us-geo.objectstorage.softlayer.net"
4 / US Cross Region San Jose Endpoint
\ "s3-api.sjc-us-geo.objectstorage.softlayer.net"
5 / US Cross Region Private Endpoint
\ "s3-api.us-geo.objectstorage.service.networklayer.com"
6 / US Cross Region Dallas Private Endpoint
\ "s3-api.dal-us-geo.objectstorage.service.networklayer.com"
7 / US Cross Region Washington DC Private Endpoint
\ "s3-api.wdc-us-geo.objectstorage.service.networklayer.com"
8 / US Cross Region San Jose Private Endpoint
\ "s3-api.sjc-us-geo.objectstorage.service.networklayer.com"
9 / US Region East Endpoint
\ "s3.us-east.objectstorage.softlayer.net"
10 / US Region East Private Endpoint
\ "s3.us-east.objectstorage.service.networklayer.com"
11 / US Region South Endpoint
[snip]
34 / Toronto Single Site Private Endpoint
\ "s3.tor01.objectstorage.service.networklayer.com"
endpoint>1
7. Specify a IBM COS Location Constraint. The location constraint must
match endpoint when using IBM Cloud Public. For on-prem COS, do not
make a selection from this list, hit enter
1 / US Cross Region Standard
\ "us-standard"
2 / US Cross Region Vault
\ "us-vault"
3 / US Cross Region Cold
\ "us-cold"
4 / US Cross Region Flex
\ "us-flex"
5 / US East Region Standard
\ "us-east-standard"
6 / US East Region Vault
\ "us-east-vault"
7 / US East Region Cold
\ "us-east-cold"
8 / US East Region Flex
\ "us-east-flex"
9 / US South Region Standard
\ "us-south-standard"
10 / US South Region Vault
\ "us-south-vault"
[snip]
32 / Toronto Flex
\ "tor01-flex"
location_constraint>1
8. Specify a canned ACL. IBM Cloud (Strorage) supports "public-read"
and "private". IBM Cloud(Infra) supports all the canned ACLs.
On-Premise COS supports all the canned ACLs.
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
1 / Owner gets FULL_CONTROL. No one else has access rights (default). This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise COS
\ "private"
2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access. This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise IBM COS
\ "public-read"
3 / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access. This acl is available on IBM Cloud (Infra), On-Premise IBM COS
\ "public-read-write"
4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access. Not supported on Buckets. This acl is available on IBM Cloud (Infra) and On-Premise IBM COS
\ "authenticated-read"
acl> 1
9. Review the displayed configuration and accept to save the "remote"
then quit. The config file should look like this
[xxx]
type = s3
Provider = IBMCOS
access_key_id = xxx
secret_access_key = yyy
endpoint = s3-api.us-geo.objectstorage.softlayer.net
location_constraint = us-standard
acl = private
10. Execute rclone commands
1) Create a bucket.
rclone mkdir IBM-COS-XREGION:newbucket
2) List available buckets.
rclone lsd IBM-COS-XREGION:
-1 2017-11-08 21:16:22 -1 test
-1 2018-02-14 20:16:39 -1 newbucket
3) List contents of a bucket.
rclone ls IBM-COS-XREGION:newbucket
18685952 test.exe
4) Copy a file from local to remote.
rclone copy /Users/file.txt IBM-COS-XREGION:newbucket
5) Copy a file from remote to local.
rclone copy IBM-COS-XREGION:newbucket/file.txt .
6) Delete a file on remote.
rclone delete IBM-COS-XREGION:newbucket/file.txt
Minio
Minio is an object storage server built for cloud application developers
and devops.
It is very easy to install and provides an S3 compatible server which
can be used by rclone.
To use it, install Minio following the instructions here.
When it configures itself Minio will print something like this
Endpoint: http://192.168.1.106:9000 http://172.23.0.1:9000
AccessKey: USWUXHGYZQYFYFFIT3RE
SecretKey: MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
Region: us-east-1
SQS ARNs: arn:minio:sqs:us-east-1:1:redis arn:minio:sqs:us-east-1:2:redis
Browser Access:
http://192.168.1.106:9000 http://172.23.0.1:9000
Command-line Access: https://docs.minio.io/docs/minio-client-quickstart-guide
$ mc config host add myminio http://192.168.1.106:9000 USWUXHGYZQYFYFFIT3RE MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
Object API (Amazon S3 compatible):
Go: https://docs.minio.io/docs/golang-client-quickstart-guide
Java: https://docs.minio.io/docs/java-client-quickstart-guide
Python: https://docs.minio.io/docs/python-client-quickstart-guide
JavaScript: https://docs.minio.io/docs/javascript-client-quickstart-guide
.NET: https://docs.minio.io/docs/dotnet-client-quickstart-guide
Drive Capacity: 26 GiB Free, 165 GiB Total
These details need to go into rclone config like this. Note that it is
important to put the region in as stated above.
env_auth> 1
access_key_id> USWUXHGYZQYFYFFIT3RE
secret_access_key> MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
region> us-east-1
endpoint> http://192.168.1.106:9000
location_constraint>
server_side_encryption>
Which makes the config file look like this
[minio]
type = s3
provider = Minio
env_auth = false
access_key_id = USWUXHGYZQYFYFFIT3RE
secret_access_key = MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
region = us-east-1
endpoint = http://192.168.1.106:9000
location_constraint =
server_side_encryption =
So once set up, for example to copy files into a bucket
rclone copy /path/to/files minio:bucket
Wasabi
Wasabi is a cloud-based object storage service for a broad range of
applications and use cases. Wasabi is designed for individuals and
organizations that require a high-performance, reliable, and secure data
storage infrastructure at minimal cost.
Wasabi provides an S3 interface which can be configured for use with
rclone like this.
No remotes found - make a new one
n) New remote
s) Set configuration password
n/s> n
name> wasabi
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
[snip]
Storage> s3
Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
1 / Enter AWS credentials in the next step
\ "false"
2 / Get AWS credentials from the environment (env vars or IAM)
\ "true"
env_auth> 1
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> YOURACCESSKEY
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> YOURSECRETACCESSKEY
Region to connect to.
Choose a number from below, or type in your own value
/ The default endpoint - a good choice if you are unsure.
1 | US Region, Northern Virginia or Pacific Northwest.
| Leave location constraint empty.
\ "us-east-1"
[snip]
region> us-east-1
Endpoint for S3 API.
Leave blank if using AWS to use the default endpoint for the region.
Specify if using an S3 clone such as Ceph.
endpoint> s3.wasabisys.com
Location constraint - must be set to match the Region. Used when creating buckets only.
Choose a number from below, or type in your own value
1 / Empty for US Region, Northern Virginia or Pacific Northwest.
\ ""
[snip]
location_constraint>
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
1 / Owner gets FULL_CONTROL. No one else has access rights (default).
\ "private"
[snip]
acl>
The server-side encryption algorithm used when storing this object in S3.
Choose a number from below, or type in your own value
1 / None
\ ""
2 / AES256
\ "AES256"
server_side_encryption>
The storage class to use when storing objects in S3.
Choose a number from below, or type in your own value
1 / Default
\ ""
2 / Standard storage class
\ "STANDARD"
3 / Reduced redundancy storage class
\ "REDUCED_REDUNDANCY"
4 / Standard Infrequent Access storage class
\ "STANDARD_IA"
storage_class>
Remote config
--------------------
[wasabi]
env_auth = false
access_key_id = YOURACCESSKEY
secret_access_key = YOURSECRETACCESSKEY
region = us-east-1
endpoint = s3.wasabisys.com
location_constraint =
acl =
server_side_encryption =
storage_class =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
This will leave the config file looking like this.
[wasabi]
type = s3
provider = Wasabi
env_auth = false
access_key_id = YOURACCESSKEY
secret_access_key = YOURSECRETACCESSKEY
region =
endpoint = s3.wasabisys.com
location_constraint =
acl =
server_side_encryption =
storage_class =
Backblaze B2
B2 is Backblaze's cloud storage system.
Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, eg remote:bucket/path/to/dir.
Here is an example of making a b2 configuration. First run
rclone config
This will guide you through an interactive setup process. You will need
your account number (a short hex number) and key (a long hex number)
which you can get from the b2 control panel.
No remotes found - make a new one
n) New remote
q) Quit config
n/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 3
Account ID
account> 123456789abc
Application Key
key> 0123456789abcdef0123456789abcdef0123456789
Endpoint for the service - leave blank normally.
endpoint>
Remote config
--------------------
[remote]
account = 123456789abc
key = 0123456789abcdef0123456789abcdef0123456789
endpoint =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
This remote is called remote and can now be used like this
See all buckets
rclone lsd remote:
Make a new bucket
rclone mkdir remote:bucket
List the contents of a bucket
rclone ls remote:bucket
Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.
rclone sync /home/local/directory remote:bucket
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
Modified time
The modified time is stored as metadata on the object as
X-Bz-Info-src_last_modified_millis as milliseconds since 1970-01-01 in
the Backblaze standard. Other tools should be able to use this as a
modified time.
Modified times are used in syncing and are fully supported except in the
case of updating a modification time on an existing object. In this case
the object will be uploaded again as B2 doesn't have an API method to
set the modification time independent of doing an upload.
SHA1 checksums
The SHA1 checksums of the files are checked on upload and download and
will be used in the syncing process.
Large files (bigger than the limit in --b2-upload-cutoff) which are
uploaded in chunks will store their SHA1 on the object as
X-Bz-Info-large_file_sha1 as recommended by Backblaze.
For a large file to be uploaded with an SHA1 checksum, the source needs
to support SHA1 checksums. The local disk supports SHA1 checksums so
large file transfers from local disk will have an SHA1. See the overview
for exactly which remotes support SHA1.
Sources which don't support SHA1, in particular crypt will upload large
files without SHA1 checksums. This may be fixed in the future (see
#1767).
Files sizes below --b2-upload-cutoff will always have an SHA1 regardless
of the source.
Transfers
Backblaze recommends that you do lots of transfers simultaneously for
maximum speed. In tests from my SSD equipped laptop the optimum setting
is about --transfers 32 though higher numbers may be used for a slight
speed improvement. The optimum number for you may vary depending on your
hardware, how big the files are, how much you want to load your
computer, etc. The default of --transfers 4 is definitely too low for
Backblaze B2 though.
Note that uploading big files (bigger than 200 MB by default) will use a
96 MB RAM buffer by default. There can be at most --transfers of these
in use at any moment, so this sets the upper limit on the memory used.
Versions
When rclone uploads a new version of a file it creates a new version of
it. Likewise when you delete a file, the old version will be marked
hidden and still be available. Conversely, you may opt in to a "hard
delete" of files with the --b2-hard-delete flag which would permanently
remove the file instead of hiding it.
Old versions of files, where available, are visible using the
--b2-versions flag.
If you wish to remove all the old versions then you can use the
rclone cleanup remote:bucket command which will delete all the old
versions of files, leaving the current ones intact. You can also supply
a path and only old versions under that path will be deleted, eg
rclone cleanup remote:bucket/path/to/stuff.
When you purge a bucket, the current and the old versions will be
deleted then the bucket will be deleted.
However delete will cause the current versions of the files to become
hidden old versions.
Here is a session showing the listing and retrieval of an old version
followed by a cleanup of the old versions.
Show current version and all the versions with --b2-versions flag.
$ rclone -q ls b2:cleanup-test
9 one.txt
$ rclone -q --b2-versions ls b2:cleanup-test
9 one.txt
8 one-v2016-07-04-141032-000.txt
16 one-v2016-07-04-141003-000.txt
15 one-v2016-07-02-155621-000.txt
Retrieve an old version
$ rclone -q --b2-versions copy b2:cleanup-test/one-v2016-07-04-141003-000.txt /tmp
$ ls -l /tmp/one-v2016-07-04-141003-000.txt
-rw-rw-r-- 1 ncw ncw 16 Jul 2 17:46 /tmp/one-v2016-07-04-141003-000.txt
Clean up all the old versions and show that they've gone.
$ rclone -q cleanup b2:cleanup-test
$ rclone -q ls b2:cleanup-test
9 one.txt
$ rclone -q --b2-versions ls b2:cleanup-test
9 one.txt
Data usage
It is useful to know how many requests are sent to the server in
different scenarios.
All copy commands send the following 4 requests:
/b2api/v1/b2_authorize_account
/b2api/v1/b2_create_bucket
/b2api/v1/b2_list_buckets
/b2api/v1/b2_list_file_names
The b2_list_file_names request will be sent once for every 1k files in
the remote path, providing the checksum and modification time of the
listed files. As of version 1.33 issue #818 causes extra requests to be
sent when using B2 with Crypt. When a copy operation does not require
any files to be uploaded, no more requests will be sent.
Uploading files that do not require chunking, will send 2 requests per
file upload:
/b2api/v1/b2_get_upload_url
/b2api/v1/b2_upload_file/
Uploading files requiring chunking, will send 2 requests (one each to
start and finish the upload) and another 2 requests for each chunk:
/b2api/v1/b2_start_large_file
/b2api/v1/b2_get_upload_part_url
/b2api/v1/b2_upload_part/
/b2api/v1/b2_finish_large_file
Specific options
Here are the command line options specific to this cloud storage system.
--b2-chunk-size valuee=SIZE
When uploading large files chunk the file into this size. Note that
these chunks are buffered in memory and there might a maximum of
--transfers chunks in progress at once. 5,000,000 Bytes is the minimim
size (default 96M).
--b2-upload-cutoff=SIZE
Cutoff for switching to chunked upload (default 190.735 MiB == 200 MB).
Files above this size will be uploaded in chunks of --b2-chunk-size.
This value should be set no larger than 4.657GiB (== 5GB) as this is the
largest file size that can be uploaded.
--b2-test-mode=FLAG
This is for debugging purposes only.
Setting FLAG to one of the strings below will cause b2 to return
specific errors for debugging purposes.
- fail_some_uploads
- expire_some_account_authorization_tokens
- force_cap_exceeded
These will be set in the X-Bz-Test-Mode header which is documented in
the b2 integrations checklist.
--b2-versions
When set rclone will show and act on older versions of files. For
example
Listing without --b2-versions
$ rclone -q ls b2:cleanup-test
9 one.txt
And with
$ rclone -q --b2-versions ls b2:cleanup-test
9 one.txt
8 one-v2016-07-04-141032-000.txt
16 one-v2016-07-04-141003-000.txt
15 one-v2016-07-02-155621-000.txt
Showing that the current version is unchanged but older versions can be
seen. These have the UTC date that they were uploaded to the server to
the nearest millisecond appended to them.
Note that when using --b2-versions no file write operations are
permitted, so you can't upload files or delete them.
Box
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
The initial setup for Box involves getting a token from Box which you
need to do in your browser. rclone config walks you through it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Box
\ "box"
5 / Dropbox
\ "dropbox"
6 / Encrypt/Decrypt a remote
\ "crypt"
7 / FTP Connection
\ "ftp"
8 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
9 / Google Drive
\ "drive"
10 / Hubic
\ "hubic"
11 / Local Disk
\ "local"
12 / Microsoft OneDrive
\ "onedrive"
13 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
14 / SSH/SFTP Connection
\ "sftp"
15 / Yandex Disk
\ "yandex"
16 / http Connection
\ "http"
Storage> box
Box App Client Id - leave blank normally.
client_id>
Box App Client Secret - leave blank normally.
client_secret>
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
client_id =
client_secret =
token = {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"XXX"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See the remote setup docs for how to set it up on a machine with no
Internet browser available.
Note that rclone runs a webserver on your local machine to collect the
token as returned from Box. This only runs from the moment it opens your
browser to the moment you get back the verification code. This is on
http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall.
Once configured you can then use rclone like this,
List directories in top level of your Box
rclone lsd remote:
List all the files in your Box
rclone ls remote:
To copy a local directory to an Box directory called backup
rclone copy /home/source remote:backup
Invalid refresh token
According to the box docs:
Each refresh_token is valid for one use in 60 days.
This means that if you
- Don't use the box remote for 60 days
- Copy the config file with a box refresh token in and use it in two
places
- Get an error on a token refresh
then rclone will return an error which includes the text
Invalid refresh token.
To fix this you will need to use oauth2 again to update the refresh
token. You can use the methods in the remote setup docs, bearing in mind
that if you use the copy the config file method, you should not use that
remote on the computer you did the authentication on.
Here is how to do it.
$ rclone config
Current remotes:
Name Type
==== ====
remote box
e) Edit existing remote
n) New remote
d) Delete remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
e/n/d/r/c/s/q> e
Choose a number from below, or type in an existing value
1 > remote
remote> remote
--------------------
[remote]
type = box
token = {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"2017-07-08T23:40:08.059167677+01:00"}
--------------------
Edit remote
Value "client_id" = ""
Edit? (y/n)>
y) Yes
n) No
y/n> n
Value "client_secret" = ""
Edit? (y/n)>
y) Yes
n) No
y/n> n
Remote config
Already have a token - refresh?
y) Yes
n) No
y/n> y
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
type = box
token = {"access_token":"YYY","token_type":"bearer","refresh_token":"YYY","expiry":"2017-07-23T12:22:29.259137901+01:00"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Modified time and hashes
Box allows modification times to be set on objects accurate to 1 second.
These will be used to detect whether objects need syncing or not.
One drive supports SHA1 type hashes, so you can use the --checksum flag.
Transfers
For files above 50MB rclone will use a chunked transfer. Rclone will
upload up to --transfers chunks at the same time (shared among all the
multipart uploads). Chunks are buffered in memory and are normally 8MB
so increasing --transfers will increase memory use.
Deleting files
Depending on the enterprise settings for your user, the item will either
be actually deleted from Box or moved to the trash.
Specific options
Here are the command line options specific to this cloud storage system.
--box-upload-cutoff=SIZE
Cutoff for switching to chunked upload - must be >= 50MB. The default is
50MB.
Limitations
Note that Box is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".
Box file names can't have the \ character in. rclone maps this to and
from an identical looking unicode equivalent ＼.
Box only supports filenames up to 255 characters in length.
Cache (BETA)
The cache remote wraps another existing remote and stores file structure
and its data for long running tasks like rclone mount.
To get started you just need to have an existing remote which can be
configured with cache.
Here is an example of how to make a remote called test-cache. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
n/r/c/s/q> n
name> test-cache
Type of storage to configure.
Choose a number from below, or type in your own value
...
5 / Cache a remote
\ "cache"
...
Storage> 5
Remote to cache.
Normally should contain a ':' and a path, eg "myremote:path/to/dir",
"myremote:bucket" or maybe "myremote:" (not recommended).
remote> local:/test
Optional: The URL of the Plex server
plex_url> http://127.0.0.1:32400
Optional: The username of the Plex user
plex_username> dummyusername
Optional: The password of the Plex user
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank
y/g/n> y
Enter the password:
password:
Confirm the password:
password:
The size of a chunk. Lower value good for slow connections but can affect seamless reading.
Default: 5M
Choose a number from below, or type in your own value
1 / 1MB
\ "1m"
2 / 5 MB
\ "5M"
3 / 10 MB
\ "10M"
chunk_size> 2
How much time should object info (file size, file hashes etc) be stored in cache. Use a very high value if you don't plan on changing the source FS from outside the cache.
Accepted units are: "s", "m", "h".
Default: 5m
Choose a number from below, or type in your own value
1 / 1 hour
\ "1h"
2 / 24 hours
\ "24h"
3 / 24 hours
\ "48h"
info_age> 2
The maximum size of stored chunks. When the storage grows beyond this size, the oldest chunks will be deleted.
Default: 10G
Choose a number from below, or type in your own value
1 / 500 MB
\ "500M"
2 / 1 GB
\ "1G"
3 / 10 GB
\ "10G"
chunk_total_size> 3
Remote config
--------------------
[test-cache]
remote = local:/test
plex_url = http://127.0.0.1:32400
plex_username = dummyusername
plex_password = *** ENCRYPTED ***
chunk_size = 5M
info_age = 48h
chunk_total_size = 10G
You can then use it like this,
List directories in top level of your drive
rclone lsd test-cache:
List all the files in your drive
rclone ls test-cache:
To start a cached mount
rclone mount --allow-other test-cache: /var/tmp/test-cache
Write Features
Offline uploading
In an effort to make writing through cache more reliable, the backend
now supports this feature which can be activated by specifying a
cache-tmp-upload-path.
A files goes through these states when using this feature:
1. An upload is started (usually by copying a file on the cache remote)
2. When the copy to the temporary location is complete the file is part
of the cached remote and looks and behaves like any other file
(reading included)
3. After cache-tmp-wait-time passes and the file is next in line,
rclone move is used to move the file to the cloud provider
4. Reading the file still works during the upload but most
modifications on it will be prohibited
5. Once the move is complete the file is unlocked for modifications as
it becomes as any other regular file
6. If the file is being read through cache when it's actually deleted
from the temporary path then cache will simply swap the source to
the cloud provider without interrupting the reading (small blip can
happen though)
Files are uploaded in sequence and only one file is uploaded at a time.
Uploads will be stored in a queue and be processed based on the order
they were added. The queue and the temporary storage is persistent
across restarts and even purges of the cache.
Write Support
Writes are supported through cache. One caveat is that a mounted cache
remote does not add any retry or fallback mechanism to the upload
operation. This will depend on the implementation of the wrapped remote.
Consider using Offline uploading for reliable writes.
One special case is covered with cache-writes which will cache the file
data at the same time as the upload when it is enabled making it
available from the cache store immediately once the upload is finished.
Read Features
Multiple connections
To counter the high latency between a local PC where rclone is running
and cloud providers, the cache remote can split multiple requests to the
cloud provider for smaller file chunks and combines them together
locally where they can be available almost immediately before the reader
usually needs them.
This is similar to buffering when media files are played online. Rclone
will stay around the current marker but always try its best to stay
ahead and prepare the data before.
Plex Integration
There is a direct integration with Plex which allows cache to detect
during reading if the file is in playback or not. This helps cache to
adapt how it queries the cloud provider depending on what is needed for.
Scans will have a minimum amount of workers (1) while in a confirmed
playback cache will deploy the configured number of workers.
This integration opens the doorway to additional performance
improvements which will be explored in the near future.
NOTE: If Plex options are not configured, cache will function with its
configured options without adapting any of its settings.
How to enable? Run rclone config and add all the Plex options (endpoint,
username and password) in your remote and it will be automatically
enabled.
Affected settings: - cache-workers: _Configured value_ during confirmed
playback or _1_ all the other times
Known issues
Mount and --dir-cache-time
--dir-cache-time controls the first layer of directory caching which
works at the mount layer. Being an independent caching mechanism from
the cache backend, it will manage its own entries based on the
configured time.
To avoid getting in a scenario where dir cache has obsolete data and
cache would have the correct one, try to set --dir-cache-time to a lower
time than --cache-info-age. Default values are already configured in
this way.
Windows support - Experimental
There are a couple of issues with Windows mount functionality that still
require some investigations. It should be considered as experimental
thus far as fixes come in for this OS.
Most of the issues seem to be related to the difference between
filesystems on Linux flavors and Windows as cache is heavily dependant
on them.
Any reports or feedback on how cache behaves on this OS is greatly
appreciated.
- https://github.com/ncw/rclone/issues/1935
- https://github.com/ncw/rclone/issues/1907
- https://github.com/ncw/rclone/issues/1834
Risk of throttling
Future iterations of the cache backend will make use of the pooling
functionality of the cloud provider to synchronize and at the same time
make writing through it more tolerant to failures.
There are a couple of enhancements in track to add these but in the
meantime there is a valid concern that the expiring cache listings can
lead to cloud provider throttles or bans due to repeated queries on it
for very large mounts.
Some recommendations: - don't use a very small interval for entry
informations (--cache-info-age) - while writes aren't yet optimised, you
can still write through cache which gives you the advantage of adding
the file in the cache at the same time if configured to do so.
Future enhancements:
- https://github.com/ncw/rclone/issues/1937
- https://github.com/ncw/rclone/issues/1936
cache and crypt
One common scenario is to keep your data encrypted in the cloud provider
using the crypt remote. crypt uses a similar technique to wrap around an
existing remote and handles this translation in a seamless way.
There is an issue with wrapping the remotes in this order: CLOUD REMOTE
-> CRYPT -> CACHE
During testing, I experienced a lot of bans with the remotes in this
order. I suspect it might be related to how crypt opens files on the
cloud provider which makes it think we're downloading the full file
instead of small chunks. Organizing the remotes in this order yelds
better results: CLOUD REMOTE -> CACHE -> CRYPT
Cache and Remote Control (--rc)
Cache supports the new --rc mode in rclone and can be remote controlled
through the following end points: By default, the listener is disabled
if you do not add the flag.
rc cache/expire
Purge a remote from the cache backend. Supports either a directory or a
file. It supports both encrypted and unencrypted file names if cache is
wrapped by crypt.
Params: - REMOTE = path to remote (REQUIRED) - WITHDATA = true/false to
delete cached data (chunks) as well _(optional, false by default)_
Specific options
Here are the command line options specific to this cloud storage system.
--cache-chunk-path=PATH
Path to where partial file data (chunks) is stored locally. The remote
name is appended to the final path.
This config follows the --cache-db-path. If you specify a custom
location for --cache-db-path and don't specify one for
--cache-chunk-path then --cache-chunk-path will use the same path as
--cache-db-path.
DEFAULT: /cache-backend/ EXAMPLE: /.cache/cache-backend/test-cache
--cache-db-path=PATH
Path to where the file structure metadata (DB) is stored locally. The
remote name is used as the DB file name.
DEFAULT: /cache-backend/ EXAMPLE: /.cache/cache-backend/test-cache
--cache-db-purge
Flag to clear all the cached data for this remote before.
DEFAULT: not set
--cache-chunk-size=SIZE
The size of a chunk (partial file data). Use lower numbers for slower
connections. If the chunk size is changed, any downloaded chunks will be
invalid and cache-chunk-path will need to be cleared or unexpected EOF
errors will occur.
DEFAULT: 5M
--cache-total-chunk-size=SIZE
The total size that the chunks can take up on the local disk. If cache
exceeds this value then it will start to the delete the oldest chunks
until it goes under this value.
DEFAULT: 10G
--cache-chunk-clean-interval=DURATION
How often should cache perform cleanups of the chunk storage. The
default value should be ok for most people. If you find that cache goes
over cache-total-chunk-size too often then try to lower this value to
force it to perform cleanups more often.
DEFAULT: 1m
--cache-info-age=DURATION
How long to keep file structure information (directory listings, file
size, mod times etc) locally.
If all write operations are done through cache then you can safely make
this value very large as the cache store will also be updated in real
time.
DEFAULT: 6h
--cache-read-retries=RETRIES
How many times to retry a read from a cache storage.
Since reading from a cache stream is independent from downloading file
data, readers can get to a point where there's no more data in the
cache. Most of the times this can indicate a connectivity issue if cache
isn't able to provide file data anymore.
For really slow connections, increase this to a point where the stream
is able to provide data but your experience will be very stuttering.
DEFAULT: 10
--cache-workers=WORKERS
How many workers should run in parallel to download chunks.
Higher values will mean more parallel processing (better CPU needed) and
more concurrent requests on the cloud provider. This impacts several
aspects like the cloud provider API limits, more stress on the hardware
that rclone runs on but it also means that streams will be more fluid
and data will be available much more faster to readers.
NOTE: If the optional Plex integration is enabled then this setting will
adapt to the type of reading performed and the value specified here will
be used as a maximum number of workers to use. DEFAULT: 4
--cache-chunk-no-memory
By default, cache will keep file data during streaming in RAM as well to
provide it to readers as fast as possible.
This transient data is evicted as soon as it is read and the number of
chunks stored doesn't exceed the number of workers. However, depending
on other settings like cache-chunk-size and cache-workers this footprint
can increase if there are parallel streams too (multiple files being
read at the same time).
If the hardware permits it, use this feature to provide an overall
better performance during streaming but it can also be disabled if RAM
is not available on the local machine.
DEFAULT: not set
--cache-rps=NUMBER
This setting places a hard limit on the number of requests per second
that cache will be doing to the cloud provider remote and try to respect
that value by setting waits between reads.
If you find that you're getting banned or limited on the cloud provider
through cache and know that a smaller number of requests per second will
allow you to work with it then you can use this setting for that.
A good balance of all the other settings should make this setting
useless but it is available to set for more special cases.
NOTE: This will limit the number of requests during streams but other
API calls to the cloud provider like directory listings will still pass.
DEFAULT: disabled
--cache-writes
If you need to read files immediately after you upload them through
cache you can enable this flag to have their data stored in the cache
store at the same time during upload.
DEFAULT: not set
--cache-tmp-upload-path=PATH
This is the path where cache will use as a temporary storage for new
files that need to be uploaded to the cloud provider.
Specifying a value will enable this feature. Without it, it is
completely disabled and files will be uploaded directly to the cloud
provider
DEFAULT: empty
--cache-tmp-wait-time=DURATION
This is the duration that a file must wait in the temporary location
_cache-tmp-upload-path_ before it is selected for upload.
Note that only one file is uploaded at a time and it can take longer to
start the upload if a queue formed for this purpose.
DEFAULT: 15m
--cache-db-wait-time=DURATION
Only one process can have the DB open at any one time, so rclone waits
for this duration for the DB to become available before it gives an
error.
If you set it to 0 then it will wait forever.
DEFAULT: 1s
Crypt
The crypt remote encrypts and decrypts another remote.
To use it first set up the underlying remote following the config
instructions for that remote. You can also use a local pathname instead
of a remote which will encrypt and decrypt from that directory which
might be useful for encrypting onto a USB stick for example.
First check your chosen remote is working - we'll call it remote:path in
these docs. Note that anything inside remote:path will be encrypted and
anything outside won't. This means that if you are using a bucket based
remote (eg S3, B2, swift) then you should probably put the bucket in the
remote s3:bucket. If you just use s3: then rclone will make encrypted
bucket names too (if using file name encryption) which may or may not be
what you want.
Now configure crypt using rclone config. We will call this one secret to
differentiate it from the remote.
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> secret
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 5
Remote to encrypt/decrypt.
Normally should contain a ':' and a path, eg "myremote:path/to/dir",
"myremote:bucket" or maybe "myremote:" (not recommended).
remote> remote:path
How to encrypt the filenames.
Choose a number from below, or type in your own value
1 / Don't encrypt the file names. Adds a ".bin" extension only.
\ "off"
2 / Encrypt the filenames see the docs for the details.
\ "standard"
3 / Very simple filename obfuscation.
\ "obfuscate"
filename_encryption> 2
Option to either encrypt directory names or leave them intact.
Choose a number from below, or type in your own value
1 / Encrypt directory names.
\ "true"
2 / Don't encrypt directory names, leave them intact.
\ "false"
filename_encryption> 1
Password or pass phrase for encryption.
y) Yes type in my own password
g) Generate random password
y/g> y
Enter the password:
password:
Confirm the password:
password:
Password or pass phrase for salt. Optional but recommended.
Should be different to the previous password.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank
y/g/n> g
Password strength in bits.
64 is just about memorable
128 is secure
1024 is the maximum
Bits> 128
Your password is: JAsJvRcgR-_veXNfy_sGmQ
Use this password?
y) Yes
n) No
y/n> y
Remote config
--------------------
[secret]
remote = remote:path
filename_encryption = standard
password = *** ENCRYPTED ***
password2 = *** ENCRYPTED ***
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
IMPORTANT The password is stored in the config file is lightly obscured
so it isn't immediately obvious what it is. It is in no way secure
unless you use config file encryption.
A long passphrase is recommended, or you can use a random one. Note that
if you reconfigure rclone with the same passwords/passphrases elsewhere
it will be compatible - all the secrets used are derived from those two
passwords/passphrases.
Note that rclone does not encrypt
- file length - this can be calcuated within 16 bytes
- modification time - used for syncing
Specifying the remote
In normal use, make sure the remote has a : in. If you specify the
remote without a : then rclone will use a local directory of that name.
So if you use a remote of /path/to/secret/files then rclone will encrypt
stuff to that directory. If you use a remote of name then rclone will
put files in a directory called name in the current directory.
If you specify the remote as remote:path/to/dir then rclone will store
encrypted files in path/to/dir on the remote. If you are using file name
encryption, then when you save files to secret:subdir/subfile this will
store them in the unencrypted path path/to/dir but the subdir/subpath
bit will be encrypted.
Note that unless you want encrypted bucket names (which are difficult to
manage because you won't know what directory they represent in web
interfaces etc), you should probably specify a bucket, eg
remote:secretbucket when using bucket based remotes such as S3, Swift,
Hubic, B2, GCS.
Example
To test I made a little directory of files using "standard" file name
encryption.
plaintext/
├── file0.txt
├── file1.txt
└── subdir
├── file2.txt
├── file3.txt
└── subsubdir
└── file4.txt
Copy these to the remote and list them back
$ rclone -q copy plaintext secret:
$ rclone -q ls secret:
7 file1.txt
6 file0.txt
8 subdir/file2.txt
10 subdir/subsubdir/file4.txt
9 subdir/file3.txt
Now see what that looked like when encrypted
$ rclone -q ls remote:path
55 hagjclgavj2mbiqm6u6cnjjqcg
54 v05749mltvv1tf4onltun46gls
57 86vhrsv86mpbtd3a0akjuqslj8/dlj7fkq4kdq72emafg7a7s41uo
58 86vhrsv86mpbtd3a0akjuqslj8/7uu829995du6o42n32otfhjqp4/b9pausrfansjth5ob3jkdqd4lc
56 86vhrsv86mpbtd3a0akjuqslj8/8njh1sk437gttmep3p70g81aps
Note that this retains the directory structure which means you can do
this
$ rclone -q ls secret:subdir
8 file2.txt
9 file3.txt
10 subsubdir/file4.txt
If don't use file name encryption then the remote will look like this -
note the .bin extensions added to prevent the cloud provider attempting
to interpret the data.
$ rclone -q ls remote:path
54 file0.txt.bin
57 subdir/file3.txt.bin
56 subdir/file2.txt.bin
58 subdir/subsubdir/file4.txt.bin
55 file1.txt.bin
File name encryption modes
Here are some of the features of the file name encryption modes
Off
- doesn't hide file names or directory structure
- allows for longer file names (~246 characters)
- can use sub paths and copy single files
Standard
- file names encrypted
- file names can't be as long (~143 characters)
- can use sub paths and copy single files
- directory structure visible
- identical files names will have identical uploaded names
- can use shortcuts to shorten the directory recursion
Obfuscation
This is a simple "rotate" of the filename, with each file having a rot
distance based on the filename. We store the distance at the beginning
of the filename. So a file called "hello" may become "53.jgnnq"
This is not a strong encryption of filenames, but it may stop automated
scanning tools from picking up on filename patterns. As such it's an
intermediate between "off" and "standard". The advantage is that it
allows for longer path segment names.
There is a possibility with some unicode based filenames that the
obfuscation is weak and may map lower case characters to upper case
equivalents. You can not rely on this for strong protection.
- file names very lightly obfuscated
- file names can be longer than standard encryption
- can use sub paths and copy single files
- directory structure visible
- identical files names will have identical uploaded names
Cloud storage systems have various limits on file name length and total
path length which you are more likely to hit using "Standard" file name
encryption. If you keep your file names to below 156 characters in
length then you should be OK on all providers.
There may be an even more secure file name encryption mode in the future
which will address the long file name problem.
Directory name encryption
Crypt offers the option of encrypting dir names or leaving them intact.
There are two options:
True
Encrypts the whole file path including directory names Example:
1/12/123.txt is encrypted to
p0e52nreeaj0a5ea7s64m4j72s/l42g6771hnv3an9cgc8cr2n1ng/qgm4avr35m5loi1th53ato71v0
False
Only encrypts file names, skips directory names Example: 1/12/123.txt is
encrypted to 1/12/qgm4avr35m5loi1th53ato71v0
Modified time and hashes
Crypt stores modification times using the underlying remote so support
depends on that.
Hashes are not stored for crypt. However the data integrity is protected
by an extremely strong crypto authenticator.
Note that you should use the rclone cryptcheck command to check the
integrity of a crypted remote instead of rclone check which can't check
the checksums properly.
Specific options
Here are the command line options specific to this cloud storage system.
--crypt-show-mapping
If this flag is set then for each file that the remote is asked to list,
it will log (at level INFO) a line stating the decrypted file name and
the encrypted file name.
This is so you can work out which encrypted names are which decrypted
names just in case you need to do something with the encrypted file
names, or for debugging purposes.
Backing up a crypted remote
If you wish to backup a crypted remote, it it recommended that you use
rclone sync on the encrypted files, and make sure the passwords are the
same in the new encrypted remote.
This will have the following advantages
- rclone sync will check the checksums while copying
- you can use rclone check between the encrypted remotes
- you don't decrypt and encrypt unnecessarily
For example, let's say you have your original remote at remote: with the
encrypted version at eremote: with path remote:crypt. You would then set
up the new remote remote2: and then the encrypted version eremote2: with
path remote2:crypt using the same passwords as eremote:.
To sync the two remotes you would do
rclone sync remote:crypt remote2:crypt
And to check the integrity you would do
rclone check remote:crypt remote2:crypt
File formats
File encryption
Files are encrypted 1:1 source file to destination object. The file has
a header and is divided into chunks.
Header
- 8 bytes magic string RCLONE\x00\x00
- 24 bytes Nonce (IV)
The initial nonce is generated from the operating systems crypto strong
random number generator. The nonce is incremented for each chunk read
making sure each nonce is unique for each block written. The chance of a
nonce being re-used is minuscule. If you wrote an exabyte of data (10¹⁸
bytes) you would have a probability of approximately 2×10⁻³² of re-using
a nonce.
Chunk
Each chunk will contain 64kB of data, except for the last one which may
have less data. The data chunk is in standard NACL secretbox format.
Secretbox uses XSalsa20 and Poly1305 to encrypt and authenticate
messages.
Each chunk contains:
- 16 Bytes of Poly1305 authenticator
- 1 - 65536 bytes XSalsa20 encrypted data
64k chunk size was chosen as the best performing chunk size (the
authenticator takes too much time below this and the performance drops
off due to cache effects above this). Note that these chunks are
buffered in memory so they can't be too big.
This uses a 32 byte (256 bit key) key derived from the user password.
Examples
1 byte file will encrypt to
- 32 bytes header
- 17 bytes data chunk
49 bytes total
1MB (1048576 bytes) file will encrypt to
- 32 bytes header
- 16 chunks of 65568 bytes
1049120 bytes total (a 0.05% overhead). This is the overhead for big
files.
Name encryption
File names are encrypted segment by segment - the path is broken up into
/ separated strings and these are encrypted individually.
File segments are padded using using PKCS#7 to a multiple of 16 bytes
before encryption.
They are then encrypted with EME using AES with 256 bit key. EME
(ECB-Mix-ECB) is a wide-block encryption mode presented in the 2003
paper "A Parallelizable Enciphering Mode" by Halevi and Rogaway.
This makes for deterministic encryption which is what we want - the same
filename must encrypt to the same thing otherwise we can't find it on
the cloud storage system.
This means that
- filenames with the same name will encrypt the same
- filenames which start the same won't have a common prefix
This uses a 32 byte key (256 bits) and a 16 byte (128 bits) IV both of
which are derived from the user password.
After encryption they are written out using a modified version of
standard base32 encoding as described in RFC4648. The standard encoding
is modified in two ways:
- it becomes lower case (no-one likes upper case filenames!)
- we strip the padding character =
base32 is used rather than the more efficient base64 so rclone can be
used on case insensitive remotes (eg Windows, Amazon Drive).
Key derivation
Rclone uses scrypt with parameters N=16384, r=8, p=1 with an optional
user supplied salt (password2) to derive the 32+32+16 = 80 bytes of key
material required. If the user doesn't supply a salt then rclone uses an
internal one.
scrypt makes it impractical to mount a dictionary attack on rclone
encrypted data. For full protection against this you should always use a
salt.
Dropbox
Paths are specified as remote:path
Dropbox paths may be as deep as required, eg
remote:directory/subdirectory.
The initial setup for dropbox involves getting a token from Dropbox
which you need to do in your browser. rclone config walks you through
it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
n) New remote
d) Delete remote
q) Quit config
e/n/d/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 4
Dropbox App Key - leave blank normally.
app_key>
Dropbox App Secret - leave blank normally.
app_secret>
Remote config
Please visit:
https://www.dropbox.com/1/oauth2/authorize?client_id=XXXXXXXXXXXXXXX&response_type=code
Enter the code: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_XXXXXXXXXX
--------------------
[remote]
app_key =
app_secret =
token = XXXXXXXXXXXXXXXXXXXXXXXXXXXXX_XXXX_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
You can then use it like this,
List directories in top level of your dropbox
rclone lsd remote:
List all the files in your dropbox
rclone ls remote:
To copy a local directory to a dropbox directory called backup
rclone copy /home/source remote:backup
Dropbox for business
Rclone supports Dropbox for business and Team Folders.
When using Dropbox for business remote: and remote:path/to/file will
refer to your personal folder.
If you wish to see Team Folders you must use a leading / in the path, so
rclone lsd remote:/ will refer to the root and show you all Team Folders
and your User Folder.
You can then use team folders like this remote:/TeamFolder and
remote:/TeamFolder/path/to/file.
A leading / for a Dropbox personal account will do nothing, but it will
take an extra HTTP transaction so it should be avoided.
Modified time and Hashes
Dropbox supports modified times, but the only way to set a modification
time is to re-upload the file.
This means that if you uploaded your data with an older version of
rclone which didn't support the v2 API and modified times, rclone will
decide to upload all your old data to fix the modification times. If you
don't want this to happen use --size-only or --checksum flag to stop it.
Dropbox supports its own hash type which is checked for all transfers.
Specific options
Here are the command line options specific to this cloud storage system.
--dropbox-chunk-size=SIZE
Any files larger than this will be uploaded in chunks of this size. The
default is 48MB. The maximum is 150MB.
Note that chunks are buffered in memory (one at a time) so rclone can
deal with retries. Setting this larger will increase the speed slightly
(at most 10% for 128MB in tests) at the cost of using more memory. It
can be set smaller if you are tight on memory.
Limitations
Note that Dropbox is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".
There are some file names such as thumbs.db which Dropbox can't store.
There is a full list of them in the "Ignored Files" section of this
document. Rclone will issue an error message
File name disallowed - not uploading if it attempts to upload one of
those file names, but the sync won't fail.
If you have more than 10,000 files in a directory then
rclone purge dropbox:dir will return the error
Failed to purge: There are too many files involved in this operation. As
a work-around do an rclone delete dropbox:dir followed by an
rclone rmdir dropbox:dir.
FTP
FTP is the File Transfer Protocol. FTP support is provided using the
github.com/jlaffaye/ftp package.
Here is an example of making an FTP configuration. First run
rclone config
This will guide you through an interactive setup process. An FTP remote
only needs a host together with and a username and a password. With
anonymous FTP server, you will need to use anonymous as username and
your email address as the password.
No remotes found - make a new one
n) New remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
n/r/c/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / FTP Connection
\ "ftp"
7 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
8 / Google Drive
\ "drive"
9 / Hubic
\ "hubic"
10 / Local Disk
\ "local"
11 / Microsoft OneDrive
\ "onedrive"
12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
13 / SSH/SFTP Connection
\ "sftp"
14 / Yandex Disk
\ "yandex"
Storage> ftp
FTP host to connect to
Choose a number from below, or type in your own value
1 / Connect to ftp.example.com
\ "ftp.example.com"
host> ftp.example.com
FTP username, leave blank for current username, ncw
user>
FTP port, leave blank to use default (21)
port>
FTP password
y) Yes type in my own password
g) Generate random password
y/g> y
Enter the password:
password:
Confirm the password:
password:
Remote config
--------------------
[remote]
host = ftp.example.com
user =
port =
pass = *** ENCRYPTED ***
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
This remote is called remote and can now be used like this
See all directories in the home directory
rclone lsd remote:
Make a new directory
rclone mkdir remote:path/to/directory
List the contents of a directory
rclone ls remote:path/to/directory
Sync /home/local/directory to the remote directory, deleting any excess
files in the directory.
rclone sync /home/local/directory remote:directory
Modified time
FTP does not support modified times. Any times you see on the server
will be time of upload.
Checksums
FTP does not support any checksums.
Limitations
Note that since FTP isn't HTTP based the following flags don't work with
it: --dump-headers, --dump-bodies, --dump-auth
Note that --timeout isn't supported (but --contimeout is).
Note that --bind isn't supported.
FTP could support server side move but doesn't yet.
Google Cloud Storage
Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, eg remote:bucket/path/to/dir.
The initial setup for google cloud storage involves getting a token from
Google Cloud Storage which you need to do in your browser. rclone config
walks you through it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
n) New remote
d) Delete remote
q) Quit config
e/n/d/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 6
Google Application Client Id - leave blank normally.
client_id>
Google Application Client Secret - leave blank normally.
client_secret>
Project number optional - needed only for list/create/delete buckets - see your developer console.
project_number> 12345678
Service Account Credentials JSON file path - needed only if you want use SA instead of interactive login.
service_account_file>
Access Control List for new objects.
Choose a number from below, or type in your own value
1 / Object owner gets OWNER access, and all Authenticated Users get READER access.
\ "authenticatedRead"
2 / Object owner gets OWNER access, and project team owners get OWNER access.
\ "bucketOwnerFullControl"
3 / Object owner gets OWNER access, and project team owners get READER access.
\ "bucketOwnerRead"
4 / Object owner gets OWNER access [default if left blank].
\ "private"
5 / Object owner gets OWNER access, and project team members get access according to their roles.
\ "projectPrivate"
6 / Object owner gets OWNER access, and all Users get READER access.
\ "publicRead"
object_acl> 4
Access Control List for new buckets.
Choose a number from below, or type in your own value
1 / Project team owners get OWNER access, and all Authenticated Users get READER access.
\ "authenticatedRead"
2 / Project team owners get OWNER access [default if left blank].
\ "private"
3 / Project team members get access according to their roles.
\ "projectPrivate"
4 / Project team owners get OWNER access, and all Users get READER access.
\ "publicRead"
5 / Project team owners get OWNER access, and all Users get WRITER access.
\ "publicReadWrite"
bucket_acl> 2
Location for the newly created buckets.
Choose a number from below, or type in your own value
1 / Empty for default location (US).
\ ""
2 / Multi-regional location for Asia.
\ "asia"
3 / Multi-regional location for Europe.
\ "eu"
4 / Multi-regional location for United States.
\ "us"
5 / Taiwan.
\ "asia-east1"
6 / Tokyo.
\ "asia-northeast1"
7 / Singapore.
\ "asia-southeast1"
8 / Sydney.
\ "australia-southeast1"
9 / Belgium.
\ "europe-west1"
10 / London.
\ "europe-west2"
11 / Iowa.
\ "us-central1"
12 / South Carolina.
\ "us-east1"
13 / Northern Virginia.
\ "us-east4"
14 / Oregon.
\ "us-west1"
location> 12
The storage class to use when storing objects in Google Cloud Storage.
Choose a number from below, or type in your own value
1 / Default
\ ""
2 / Multi-regional storage class
\ "MULTI_REGIONAL"
3 / Regional storage class
\ "REGIONAL"
4 / Nearline storage class
\ "NEARLINE"
5 / Coldline storage class
\ "COLDLINE"
6 / Durable reduced availability storage class
\ "DURABLE_REDUCED_AVAILABILITY"
storage_class> 5
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine or Y didn't work
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
type = google cloud storage
client_id =
client_secret =
token = {"AccessToken":"xxxx.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","RefreshToken":"x/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx_xxxxxxxxx","Expiry":"2014-07-17T20:49:14.929208288+01:00","Extra":null}
project_number = 12345678
object_acl = private
bucket_acl = private
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Note that rclone runs a webserver on your local machine to collect the
token as returned from Google if you use auto config mode. This only
runs from the moment it opens your browser to the moment you get back
the verification code. This is on http://127.0.0.1:53682/ and this it
may require you to unblock it temporarily if you are running a host
firewall, or use manual mode.
This remote is called remote and can now be used like this
See all the buckets in your project
rclone lsd remote:
Make a new bucket
rclone mkdir remote:bucket
List the contents of a bucket
rclone ls remote:bucket
Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.
rclone sync /home/local/directory remote:bucket
Service Account support
You can set up rclone with Google Cloud Storage in an unattended mode,
i.e. not tied to a specific end-user Google account. This is useful when
you want to synchronise files onto machines that don't have actively
logged-in users, for example build machines.
To get credentials for Google Cloud Platform IAM Service Accounts,
please head to the Service Account section of the Google Developer
Console. Service Accounts behave just like normal User permissions in
Google Cloud Storage ACLs, so you can limit their access (e.g. make them
read only). After creating an account, a JSON file containing the
Service Account's credentials will be downloaded onto your machines.
These credentials are what rclone will use for authentication.
To use a Service Account instead of OAuth2 token flow, enter the path to
your Service Account credentials at the service_account_file prompt and
rclone won't use the browser based authentication flow. If you'd rather
stuff the contents of the credentials file into the rclone config file,
you can set service_account_credentials with the actual contents of the
file instead, or set the equivalent environment variable.
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
Modified time
Google google cloud storage stores md5sums natively and rclone stores
modification times as metadata on the object, under the "mtime" key in
RFC3339 format accurate to 1ns.
Google Drive
Paths are specified as drive:path
Drive paths may be as deep as required, eg drive:directory/subdirectory.
The initial setup for drive involves getting a token from Google drive
which you need to do in your browser. rclone config walks you through
it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
n/r/c/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
10 / Google Drive
\ "drive"
[snip]
Storage> drive
Google Application Client Id - leave blank normally.
client_id>
Google Application Client Secret - leave blank normally.
client_secret>
Scope that rclone should use when requesting access from drive.
Choose a number from below, or type in your own value
1 / Full access all files, excluding Application Data Folder.
\ "drive"
2 / Read-only access to file metadata and file contents.
\ "drive.readonly"
/ Access to files created by rclone only.
3 | These are visible in the drive website.
| File authorization is revoked when the user deauthorizes the app.
\ "drive.file"
/ Allows read and write access to the Application Data folder.
4 | This is not visible in the drive website.
\ "drive.appfolder"
/ Allows read-only access to file metadata but
5 | does not allow any access to read or download file content.
\ "drive.metadata.readonly"
scope> 1
ID of the root folder - leave blank normally. Fill in to access "Computers" folders. (see docs).
root_folder_id>
Service Account Credentials JSON file path - needed only if you want use SA instead of interactive login.
service_account_file>
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine or Y didn't work
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
Configure this as a team drive?
y) Yes
n) No
y/n> n
--------------------
[remote]
client_id =
client_secret =
scope = drive
root_folder_id =
service_account_file =
token = {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2014-03-16T13:57:58.955387075Z"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Note that rclone runs a webserver on your local machine to collect the
token as returned from Google if you use auto config mode. This only
runs from the moment it opens your browser to the moment you get back
the verification code. This is on http://127.0.0.1:53682/ and this it
may require you to unblock it temporarily if you are running a host
firewall, or use manual mode.
You can then use it like this,
List directories in top level of your drive
rclone lsd remote:
List all the files in your drive
rclone ls remote:
To copy a local directory to a drive directory called backup
rclone copy /home/source remote:backup
Scopes
Rclone allows you to select which scope you would like for rclone to
use. This changes what type of token is granted to rclone. The scopes
are defined here..
The scope are
drive
This is the default scope and allows full access to all files, except
for the Application Data Folder (see below).
Choose this one if you aren't sure.
drive.readonly
This allows read only access to all files. Files may be listed and
downloaded but not uploaded, renamed or deleted.
drive.file
With this scope rclone can read/view/modify only those files and folders
it creates.
So if you uploaded files to drive via the web interface (or any other
means) they will not be visible to rclone.
This can be useful if you are using rclone to backup data and you want
to be sure confidential data on your drive is not visible to rclone.
Files created with this scope are visible in the web interface.
drive.appfolder
This gives rclone its own private area to store files. Rclone will not
be able to see any other files on your drive and you won't be able to
see rclone's files from the web interface either.
drive.metadata.readonly
This allows read only access to file names only. It does not allow
rclone to download or upload data, or rename or delete files or
directories.
Root folder ID
You can set the root_folder_id for rclone. This is the directory
(identified by its Folder ID) that rclone considers to be a the root of
your drive.
Normally you will leave this blank and rclone will determine the correct
root to use itself.
However you can set this to restrict rclone to a specific folder
hierarchy or to access data within the "Computers" tab on the drive web
interface (where files from Google's Backup and Sync desktop program
go).
In order to do this you will have to find the Folder ID of the directory
you wish rclone to display. This will be the last segment of the URL
when you open the relevant folder in the drive web interface.
So if the folder you want rclone to use has a URL which looks like
https://drive.google.com/drive/folders/1XyfxxxxxxxxxxxxxxxxxxxxxxxxxKHCh
in the browser, then you use 1XyfxxxxxxxxxxxxxxxxxxxxxxxxxKHCh as the
root_folder_id in the config.
NB folders under the "Computers" tab seem to be read only (drive gives a
500 error) when using rclone.
There doesn't appear to be an API to discover the folder IDs of the
"Computers" tab - please contact us if you know otherwise!
Note also that rclone can't access any data under the "Backups" tab on
the google drive web interface yet.
Service Account support
You can set up rclone with Google Drive in an unattended mode, i.e. not
tied to a specific end-user Google account. This is useful when you want
to synchronise files onto machines that don't have actively logged-in
users, for example build machines.
To use a Service Account instead of OAuth2 token flow, enter the path to
your Service Account credentials at the service_account_file prompt
during rclone config and rclone won't use the browser based
authentication flow. If you'd rather stuff the contents of the
credentials file into the rclone config file, you can set
service_account_credentials with the actual contents of the file
instead, or set the equivalent environment variable.
Use case - Google Apps/G-suite account and individual Drive
Let's say that you are the administrator of a Google Apps (old) or
G-suite account. The goal is to store data on an individual's Drive
account, who IS a member of the domain. We'll call the domain
EXAMPLE.COM, and the user FOO@EXAMPLE.COM.
There's a few steps we need to go through to accomplish this:
1. Create a service account for example.com
- To create a service account and obtain its credentials, go to the
Google Developer Console.
- You must have a project - create one if you don't.
- Then go to "IAM & admin" -> "Service Accounts".
- Use the "Create Credentials" button. Fill in "Service account name"
with something that identifies your client. "Role" can be empty.
- Tick "Furnish a new private key" - select "Key type JSON".
- Tick "Enable G Suite Domain-wide Delegation". This option makes
"impersonation" possible, as documented here: Delegating domain-wide
authority to the service account
- These credentials are what rclone will use for authentication. If
you ever need to remove access, press the "Delete service account
key" button.
2. Allowing API access to example.com Google Drive
- Go to example.com's admin console
- Go into "Security" (or use the search bar)
- Select "Show more" and then "Advanced settings"
- Select "Manage API client access" in the "Authentication" section
- In the "Client Name" field enter the service account's "Client ID" -
this can be found in the Developer Console under "IAM & Admin" ->
"Service Accounts", then "View Client ID" for the newly created
service account. It is a ~21 character numerical string.
- In the next field, "One or More API Scopes", enter
https://www.googleapis.com/auth/drive to grant access to Google
Drive specifically.
3. Configure rclone, assuming a new install
rclone config
n/s/q> n # New
name>gdrive # Gdrive is an example name
Storage> # Select the number shown for Google Drive
client_id> # Can be left blank
client_secret> # Can be left blank
scope> # Select your scope, 1 for example
root_folder_id> # Can be left blank
service_account_file> /home/foo/myJSONfile.json # This is where the JSON file goes!
y/n> # Auto config, y
4. Verify that it's working
- rclone -v --drive-impersonate foo@example.com lsf gdrive:backup
- The arguments do:
- -v - verbose logging
- --drive-impersonate foo@example.com - this is what does the
magic, pretending to be user foo.
- lsf - list files in a parsing friendly way
- gdrive:backup - use the remote called gdrive, work in the folder
named backup.
Team drives
If you want to configure the remote to point to a Google Team Drive then
answer y to the question Configure this as a team drive?.
This will fetch the list of Team Drives from google and allow you to
configure which one you want to use. You can also type in a team drive
ID if you prefer.
For example:
Configure this as a team drive?
y) Yes
n) No
y/n> y
Fetching team drive list...
Choose a number from below, or type in your own value
1 / Rclone Test
\ "xxxxxxxxxxxxxxxxxxxx"
2 / Rclone Test 2
\ "yyyyyyyyyyyyyyyyyyyy"
3 / Rclone Test 3
\ "zzzzzzzzzzzzzzzzzzzz"
Enter a Team Drive ID> 1
--------------------
[remote]
client_id =
client_secret =
token = {"AccessToken":"xxxx.x.xxxxx_xxxxxxxxxxx_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","RefreshToken":"1/xxxxxxxxxxxxxxxx_xxxxxxxxxxxxxxxxxxxxxxxxxx","Expiry":"2014-03-16T13:57:58.955387075Z","Extra":null}
team_drive = xxxxxxxxxxxxxxxxxxxx
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Modified time
Google drive stores modification times accurate to 1 ms.
Revisions
Google drive stores revisions of files. When you upload a change to an
existing file to google drive using rclone it will create a new revision
of that file.
Revisions follow the standard google policy which at time of writing was
- They are deleted after 30 days or 100 revisions (whatever comes
first).
- They do not count towards a user storage quota.
Deleting files
By default rclone will send all files to the trash when deleting files.
If deleting them permanently is required then use the
--drive-use-trash=false flag, or set the equivalent environment
variable.
Emptying trash
If you wish to empty your trash you can use the rclone cleanup remote:
command which will permanently delete all your trashed files. This
command does not take any path arguments.
Quota information
To view your current quota you can use the rclone about remote: command
which will display your usage limit (quota), the usage in Google Drive,
the size of all files in the Trash and the space used by other Google
services such as Gmail. This command does not take any path arguments.
Specific options
Here are the command line options specific to this cloud storage system.
--drive-acknowledge-abuse
If downloading a file returns the error
This file has been identified as malware or spam and cannot be downloaded
with the error code cannotDownloadAbusiveFile then supply this flag to
rclone to indicate you acknowledge the risks of downloading the file and
rclone will download it anyway.
--drive-auth-owner-only
Only consider files owned by the authenticated user.
--drive-chunk-size=SIZE
Upload chunk size. Must a power of 2 >= 256k. Default value is 8 MB.
Making this larger will improve performance, but note that each chunk is
buffered in memory one per transfer.
Reducing this will reduce memory usage but decrease performance.
--drive-formats
Google documents can only be exported from Google drive. When rclone
downloads a Google doc it chooses a format to download depending upon
this setting.
By default the formats are docx,xlsx,pptx,svg which are a sensible
default for an editable document.
When choosing a format, rclone runs down the list provided in order and
chooses the first file format the doc can be exported as from the list.
If the file can't be exported to a format on the formats list, then
rclone will choose a format from the default list.
If you prefer an archive copy then you might use --drive-formats pdf, or
if you prefer openoffice/libreoffice formats you might use
--drive-formats ods,odt,odp.
Note that rclone adds the extension to the google doc, so if it is
calles My Spreadsheet on google docs, it will be exported as
My Spreadsheet.xlsx or My Spreadsheet.pdf etc.
Here are the possible extensions with their corresponding mime types.
Extension Mime Type Description
--------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ -------------------------------------------------------------------------------------------------
csv text/csv Standard CSV format for Spreadsheets
doc application/msword Micosoft Office Document
docx application/vnd.openxmlformats-officedocument.wordprocessingml.document Microsoft Office Document
epub application/epub+zip E-book format
html text/html An HTML Document
jpg image/jpeg A JPEG Image File
odp application/vnd.oasis.opendocument.presentation Openoffice Presentation
ods application/vnd.oasis.opendocument.spreadsheet Openoffice Spreadsheet
ods application/x-vnd.oasis.opendocument.spreadsheet Openoffice Spreadsheet
odt application/vnd.oasis.opendocument.text Openoffice Document
pdf application/pdf Adobe PDF Format
png image/png PNG Image Format
pptx application/vnd.openxmlformats-officedocument.presentationml.presentation Microsoft Office Powerpoint
rtf application/rtf Rich Text Format
svg image/svg+xml Scalable Vector Graphics Format
tsv text/tab-separated-values Standard TSV format for spreadsheets
txt text/plain Plain Text
xls application/vnd.ms-excel Microsoft Office Spreadsheet
xlsx application/vnd.openxmlformats-officedocument.spreadsheetml.sheet Microsoft Office Spreadsheet
zip application/zip A ZIP file of HTML, Images CSS
--drive-alternate-export
If this option is set this instructs rclone to use an alternate set of
export URLs for drive documents. Users have reported that the official
export URLs can't export large documents, whereas these unofficial ones
can.
See rclone issue #2243 for background, this google drive issue and this
helpful post.
--drive-impersonate user
When using a service account, this instructs rclone to impersonate the
user passed in.
--drive-list-chunk int
Size of listing chunk 100-1000. 0 to disable. (default 1000)
--drive-shared-with-me
Instructs rclone to operate on your "Shared with me" folder (where
Google Drive lets you access the files and folders others have shared
with you).
This works both with the "list" (lsd, lsl, etc) and the "copy" commands
(copy, sync, etc), and with all other commands too.
--drive-skip-gdocs
Skip google documents in all listings. If given, gdocs practically
become invisible to rclone.
--drive-trashed-only
Only show files that are in the trash. This will show trashed files in
their original directory structure.
--drive-upload-cutoff=SIZE
File size cutoff for switching to chunked upload. Default is 8 MB.
--drive-use-trash
Controls whether files are sent to the trash or deleted permanently.
Defaults to true, namely sending files to the trash. Use
--drive-use-trash=false to delete files permanently instead.
--drive-use-created-date
Use the file creation date in place of the modification date. Defaults
to false.
Useful when downloading data and you want the creation date used in
place of the last modified date.
WARNING: This flag may have some unexpected consequences.
When uploading to your drive all files will be overwritten unless they
haven't been modified since their creation. And the inverse will occur
while downloading. This side effect can be avoided by using the
--checksum flag.
This feature was implemented to retain photos capture date as recorded
by google photos. You will first need to check the "Create a Google
Photos folder" option in your google drive settings. You can then copy
or move the photos locally and use the date the image was taken
(created) set as the modification date.
Limitations
Drive has quite a lot of rate limiting. This causes rclone to be limited
to transferring about 2 files per second only. Individual files may be
transferred much faster at 100s of MBytes/s but lots of small files can
take a long time.
Server side copies are also subject to a separate rate limit. If you see
User rate limit exceeded errors, wait at least 24 hours and retry. You
can disable server side copies with --disable copy to download and
upload the files if you prefer.
Limitations of Google Docs
Google docs will appear as size -1 in rclone ls and as size 0 in
anything which uses the VFS layer, eg rclone mount, rclone serve.
This is because rclone can't find out the size of the Google docs
without downloading them.
Google docs will transfer correctly with rclone sync, rclone copy etc as
rclone knows to ignore the size when doing the transfer.
However an unfortunate consequence of this is that you can't download
Google docs using rclone mount - you will get a 0 sized file. If you try
again the doc may gain its correct size and be downloadable.
Duplicated files
Sometimes, for no reason I've been able to track down, drive will
duplicate a file that rclone uploads. Drive unlike all the other remotes
can have duplicated files.
Duplicated files cause problems with the syncing and you will see
messages in the log about duplicates.
Use rclone dedupe to fix duplicated files.
Note that this isn't just a problem with rclone, even Google Photos on
Android duplicates files on drive sometimes.
Rclone appears to be re-copying files it shouldn't
The most likely cause of this is the duplicated file issue above - run
rclone dedupe and check your logs for duplicate object or directory
messages.
Making your own client_id
When you use rclone with Google drive in its default configuration you
are using rclone's client_id. This is shared between all the rclone
users. There is a global rate limit on the number of queries per second
that each client_id can do set by Google. rclone already has a high
quota and I will continue to make sure it is high enough by contacting
Google.
However you might find you get better performance making your own
client_id if you are a heavy user. Or you may not depending on exactly
how Google have been raising rclone's rate limit.
Here is how to create your own Google Drive client ID for rclone:
1. Log into the Google API Console with your Google account. It doesn't
matter what Google account you use. (It need not be the same account
as the Google Drive you want to access)
2. Select a project or create a new project.
3. Under "ENABLE APIS AND SERVICES" search for "Drive", and enable the
then "Google Drive API".
4. Click "Credentials" in the left-side panel (not "Create
credentials", which opens the wizard), then "Create credentials",
then "OAuth client ID". It will prompt you to set the OAuth consent
screen product name, if you haven't set one already.
5. Choose an application type of "other", and click "Create". (the
default name is fine)
6. It will show you a client ID and client secret. Use these values in
rclone config to add a new remote or edit an existing remote.
(Thanks to @balazer on github for these instructions.)
HTTP
The HTTP remote is a read only remote for reading files of a webserver.
The webserver should provide file listings which rclone will read and
turn into a remote. This has been tested with common webservers such as
Apache/Nginx/Caddy and will likely work with file listings from most web
servers. (If it doesn't then please file an issue, or send a pull
request!)
Paths are specified as remote: or remote:path/to/dir.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / FTP Connection
\ "ftp"
7 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
8 / Google Drive
\ "drive"
9 / Hubic
\ "hubic"
10 / Local Disk
\ "local"
11 / Microsoft OneDrive
\ "onedrive"
12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
13 / SSH/SFTP Connection
\ "sftp"
14 / Yandex Disk
\ "yandex"
15 / http Connection
\ "http"
Storage> http
URL of http host to connect to
Choose a number from below, or type in your own value
1 / Connect to example.com
\ "https://example.com"
url> https://beta.rclone.org
Remote config
--------------------
[remote]
url = https://beta.rclone.org
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Current remotes:
Name Type
==== ====
remote http
e) Edit existing remote
n) New remote
d) Delete remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
e/n/d/r/c/s/q> q
This remote is called remote and can now be used like this
See all the top level directories
rclone lsd remote:
List the contents of a directory
rclone ls remote:directory
Sync the remote directory to /home/local/directory, deleting any excess
files.
rclone sync remote:directory /home/local/directory
Read only
This remote is read only - you can't upload files to an HTTP server.
Modified time
Most HTTP servers store time accurate to 1 second.
Checksum
No checksums are stored.
Usage without a config file
Note that since only two environment variable need to be set, it is easy
to use without a config file like this.
RCLONE_CONFIG_ZZ_TYPE=http RCLONE_CONFIG_ZZ_URL=https://beta.rclone.org rclone lsd zz:
Or if you prefer
export RCLONE_CONFIG_ZZ_TYPE=http
export RCLONE_CONFIG_ZZ_URL=https://beta.rclone.org
rclone lsd zz:
Hubic
Paths are specified as remote:path
Paths are specified as remote:container (or remote: for the lsd
command.) You may put subdirectories in too, eg
remote:container/path/to/dir.
The initial setup for Hubic involves getting a token from Hubic which
you need to do in your browser. rclone config walks you through it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
n) New remote
s) Set configuration password
n/s> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 8
Hubic Client Id - leave blank normally.
client_id>
Hubic Client Secret - leave blank normally.
client_secret>
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
client_id =
client_secret =
token = {"access_token":"XXXXXX"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See the remote setup docs for how to set it up on a machine with no
Internet browser available.
Note that rclone runs a webserver on your local machine to collect the
token as returned from Hubic. This only runs from the moment it opens
your browser to the moment you get back the verification code. This is
on http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall.
Once configured you can then use rclone like this,
List containers in the top level of your Hubic
rclone lsd remote:
List all the files in your Hubic
rclone ls remote:
To copy a local directory to an Hubic directory called backup
rclone copy /home/source remote:backup
If you want the directory to be visible in the official _Hubic browser_,
you need to copy your files to the default directory
rclone copy /home/source remote:default/backup
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
Modified time
The modified time is stored as metadata on the object as
X-Object-Meta-Mtime as floating point since the epoch accurate to 1 ns.
This is a defacto standard (used in the official python-swiftclient
amongst others) for storing the modification time for an object.
Note that Hubic wraps the Swift backend, so most of the properties of
are the same.
Limitations
This uses the normal OpenStack Swift mechanism to refresh the Swift API
credentials and ignores the expires field returned by the Hubic API.
The Swift API doesn't return a correct MD5SUM for segmented files
(Dynamic or Static Large Objects) so rclone won't check or use the
MD5SUM for these.
Mega
Mega is a cloud storage and file hosting service known for its security
feature where all files are encrypted locally before they are uploaded.
This prevents anyone (including employees of Mega) from accessing the
files without knowledge of the key used for encryption.
This is an rclone backend for Mega which supports the file transfer
features of Mega using the same client side encryption.
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Alias for a existing remote
\ "alias"
[snip]
14 / Mega
\ "mega"
[snip]
23 / http Connection
\ "http"
Storage> mega
User name
user> you@example.com
Password.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank
y/g/n> y
Enter the password:
password:
Confirm the password:
password:
Remote config
--------------------
[remote]
type = mega
user = you@example.com
pass = *** ENCRYPTED ***
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Once configured you can then use rclone like this,
List directories in top level of your Mega
rclone lsd remote:
List all the files in your Mega
rclone ls remote:
To copy a local directory to an Mega directory called backup
rclone copy /home/source remote:backup
Modified time and hashes
Mega does not support modification times or hashes yet.
Duplicated files
Mega can have two files with exactly the same name and path (unlike a
normal file system).
Duplicated files cause problems with the syncing and you will see
messages in the log about duplicates.
Use rclone dedupe to fix duplicated files.
Limitations
This backend uses the go-mega go library which is an opensource go
library implementing the Mega API. There doesn't appear to be any
documentation for the mega protocol beyond the mega C++ SDK source code
so there are likely quite a few errors still remaining in this library.
Mega allows duplicate files which may confuse rclone.
Microsoft Azure Blob Storage
Paths are specified as remote:container (or remote: for the lsd
command.) You may put subdirectories in too, eg
remote:container/path/to/dir.
Here is an example of making a Microsoft Azure Blob Storage
configuration. For a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Box
\ "box"
5 / Dropbox
\ "dropbox"
6 / Encrypt/Decrypt a remote
\ "crypt"
7 / FTP Connection
\ "ftp"
8 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
9 / Google Drive
\ "drive"
10 / Hubic
\ "hubic"
11 / Local Disk
\ "local"
12 / Microsoft Azure Blob Storage
\ "azureblob"
13 / Microsoft OneDrive
\ "onedrive"
14 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
15 / SSH/SFTP Connection
\ "sftp"
16 / Yandex Disk
\ "yandex"
17 / http Connection
\ "http"
Storage> azureblob
Storage Account Name
account> account_name
Storage Account Key
key> base64encodedkey==
Endpoint for the service - leave blank normally.
endpoint>
Remote config
--------------------
[remote]
account = account_name
key = base64encodedkey==
endpoint =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See all containers
rclone lsd remote:
Make a new container
rclone mkdir remote:container
List the contents of a container
rclone ls remote:container
Sync /home/local/directory to the remote container, deleting any excess
files in the container.
rclone sync /home/local/directory remote:container
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
Modified time
The modified time is stored as metadata on the object with the mtime
key. It is stored using RFC3339 Format time with nanosecond precision.
The metadata is supplied during directory listings so there is no
overhead to using it.
Hashes
MD5 hashes are stored with blobs. However blobs that were uploaded in
chunks only have an MD5 if the source remote was capable of MD5 hashes,
eg the local disk.
Multipart uploads
Rclone supports multipart uploads with Azure Blob storage. Files bigger
than 256MB will be uploaded using chunked upload by default.
The files will be uploaded in parallel in 4MB chunks (by default). Note
that these chunks are buffered in memory and there may be up to
--transfers of them being uploaded at once.
Files can't be split into more than 50,000 chunks so by default, so the
largest file that can be uploaded with 4MB chunk size is 195GB. Above
this rclone will double the chunk size until it creates less than 50,000
chunks. By default this will mean a maximum file size of 3.2TB can be
uploaded. This can be raised to 5TB using --azureblob-chunk-size 100M.
Note that rclone doesn't commit the block list until the end of the
upload which means that there is a limit of 9.5TB of multipart uploads
in progress as Azure won't allow more than that amount of uncommitted
blocks.
Specific options
Here are the command line options specific to this cloud storage system.
--azureblob-upload-cutoff=SIZE
Cutoff for switching to chunked upload - must be <= 256MB. The default
is 256MB.
--azureblob-chunk-size=SIZE
Upload chunk size. Default 4MB. Note that this is stored in memory and
there may be up to --transfers chunks stored at once in memory. This can
be at most 100MB.
Limitations
MD5 sums are only uploaded with chunked files if the source has an MD5
sum. This will always be the case for a local to azure copy.
Microsoft OneDrive
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
The initial setup for OneDrive involves getting a token from Microsoft
which you need to do in your browser. rclone config walks you through
it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
n/s> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 10
Microsoft App Client Id - leave blank normally.
client_id>
Microsoft App Client Secret - leave blank normally.
client_secret>
Remote config
Choose OneDrive account type?
* Say b for a OneDrive business account
* Say p for a personal OneDrive account
b) Business
p) Personal
b/p> p
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
client_id =
client_secret =
token = {"access_token":"XXXXXX"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See the remote setup docs for how to set it up on a machine with no
Internet browser available.
Note that rclone runs a webserver on your local machine to collect the
token as returned from Microsoft. This only runs from the moment it
opens your browser to the moment you get back the verification code.
This is on http://127.0.0.1:53682/ and this it may require you to
unblock it temporarily if you are running a host firewall.
Once configured you can then use rclone like this,
List directories in top level of your OneDrive
rclone lsd remote:
List all the files in your OneDrive
rclone ls remote:
To copy a local directory to an OneDrive directory called backup
rclone copy /home/source remote:backup
OneDrive for Business
There is additional support for OneDrive for Business. Select "b" when
ask
Choose OneDrive account type?
* Say b for a OneDrive business account
* Say p for a personal OneDrive account
b) Business
p) Personal
b/p>
After that rclone requires an authentication of your account. The
application will first authenticate your account, then query the
OneDrive resource URL and do a second (silent) authentication for this
resource URL.
Modified time and hashes
OneDrive allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not.
OneDrive personal supports SHA1 type hashes. OneDrive for business and
Sharepoint Server support QuickXorHash.
For all types of OneDrive you can use the --checksum flag.
Deleting files
Any files you delete with rclone will end up in the trash. Microsoft
doesn't provide an API to permanently delete files, nor to empty the
trash, so you will have to do that with one of Microsoft's apps or via
the OneDrive website.
Specific options
Here are the command line options specific to this cloud storage system.
--onedrive-chunk-size=SIZE
Above this size files will be chunked - must be multiple of 320k. The
default is 10MB. Note that the chunks will be buffered into memory.
Limitations
Note that OneDrive is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".
There are quite a few characters that can't be in OneDrive file names.
These can't occur on Windows platforms, but on non-Windows platforms
they are common. Rclone will map these names to and from an identical
looking unicode equivalent. For example if a file has a ? in it will be
mapped to ？ instead.
The largest allowed file size is 10GiB (10,737,418,240 bytes).
Versioning issue
Every change in OneDrive causes the service to create a new version.
This counts against a users quota. For example changing the modification
time of a file creates a second version, so the file is using twice the
space.
The copy is the only rclone command affected by this as we copy the file
and then afterwards set the modification time to match the source file.
User Weropol has found a method to disable versioning on OneDrive
1. Open the settings menu by clicking on the gear symbol at the top of
the OneDrive Business page.
2. Click Site settings.
3. Once on the Site settings page, navigate to Site Administration >
Site libraries and lists.
4. Click Customize "Documents".
5. Click General Settings > Versioning Settings.
6. Under Document Version History select the option No versioning.
Note: This will disable the creation of new file versions, but will
not remove any previous versions. Your documents are safe.
7. Apply the changes by clicking OK.
8. Use rclone to upload or modify files. (I also use the
--no-update-modtime flag)
9. Restore the versioning settings after using rclone. (Optional)
Troubleshooting
Error: access_denied
Code: AADSTS65005
Description: Using application 'rclone' is currently not supported for your organization [YOUR_ORGANIZATION] because it is in an unmanaged state. An administrator needs to claim ownership of the company by DNS validation of [YOUR_ORGANIZATION] before the application rclone can be provisioned.
This means that rclone can't use the OneDrive for Business API with your
account. You can't do much about it, maybe write an email to your
admins.
However, there are other ways to interact with your OneDrive account.
Have a look at the webdav backend: https://rclone.org/webdav/#sharepoint
OpenDrive
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
n) New remote
d) Delete remote
q) Quit config
e/n/d/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / OpenDrive
\ "opendrive"
11 / Microsoft OneDrive
\ "onedrive"
12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
13 / SSH/SFTP Connection
\ "sftp"
14 / Yandex Disk
\ "yandex"
Storage> 10
Username
username>
Password
y) Yes type in my own password
g) Generate random password
y/g> y
Enter the password:
password:
Confirm the password:
password:
--------------------
[remote]
username =
password = *** ENCRYPTED ***
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
List directories in top level of your OpenDrive
rclone lsd remote:
List all the files in your OpenDrive
rclone ls remote:
To copy a local directory to an OpenDrive directory called backup
rclone copy /home/source remote:backup
Modified time and MD5SUMs
OpenDrive allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not.
Deleting files
Any files you delete with rclone will end up in the trash. Amazon don't
provide an API to permanently delete files, nor to empty the trash, so
you will have to do that with one of Amazon's apps or via the OpenDrive
website. As of November 17, 2016, files are automatically deleted by
Amazon from the trash after 30 days.
Limitations
Note that OpenDrive is case insensitive so you can't have a file called
"Hello.doc" and one called "hello.doc".
There are quite a few characters that can't be in OpenDrive file names.
These can't occur on Windows platforms, but on non-Windows platforms
they are common. Rclone will map these names to and from an identical
looking unicode equivalent. For example if a file has a ? in it will be
mapped to ？ instead.
QingStor
Paths are specified as remote:bucket (or remote: for the lsd command.)
You may put subdirectories in too, eg remote:bucket/path/to/dir.
Here is an example of making an QingStor configuration. First run
rclone config
This will guide you through an interactive setup process.
No remotes found - make a new one
n) New remote
r) Rename remote
c) Copy remote
s) Set configuration password
q) Quit config
n/r/c/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / FTP Connection
\ "ftp"
7 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
8 / Google Drive
\ "drive"
9 / Hubic
\ "hubic"
10 / Local Disk
\ "local"
11 / Microsoft OneDrive
\ "onedrive"
12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
13 / QingStor Object Storage
\ "qingstor"
14 / SSH/SFTP Connection
\ "sftp"
15 / Yandex Disk
\ "yandex"
Storage> 13
Get QingStor credentials from runtime. Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
1 / Enter QingStor credentials in the next step
\ "false"
2 / Get QingStor credentials from the environment (env vars or IAM)
\ "true"
env_auth> 1
QingStor Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> access_key
QingStor Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> secret_key
Enter a endpoint URL to connection QingStor API.
Leave blank will use the default value "https://qingstor.com:443"
endpoint>
Zone connect to. Default is "pek3a".
Choose a number from below, or type in your own value
/ The Beijing (China) Three Zone
1 | Needs location constraint pek3a.
\ "pek3a"
/ The Shanghai (China) First Zone
2 | Needs location constraint sh1a.
\ "sh1a"
zone> 1
Number of connnection retry.
Leave blank will use the default value "3".
connection_retries>
Remote config
--------------------
[remote]
env_auth = false
access_key_id = access_key
secret_access_key = secret_key
endpoint =
zone = pek3a
connection_retries =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
This remote is called remote and can now be used like this
See all buckets
rclone lsd remote:
Make a new bucket
rclone mkdir remote:bucket
List the contents of a bucket
rclone ls remote:bucket
Sync /home/local/directory to the remote bucket, deleting any excess
files in the bucket.
rclone sync /home/local/directory remote:bucket
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
Multipart uploads
rclone supports multipart uploads with QingStor which means that it can
upload files bigger than 5GB. Note that files uploaded with multipart
upload don't have an MD5SUM.
Buckets and Zone
With QingStor you can list buckets (rclone lsd) using any zone, but you
can only access the content of a bucket from the zone it was created in.
If you attempt to access a bucket from the wrong zone, you will get an
error, incorrect zone, the bucket is not in 'XXX' zone.
Authentication
There are two ways to supply rclone with a set of QingStor credentials.
In order of precedence:
- Directly in the rclone configuration file (as configured by
rclone config)
- set access_key_id and secret_access_key
- Runtime configuration:
- set env_auth to true in the config file
- Exporting the following environment variables before running rclone
- Access Key ID: QS_ACCESS_KEY_ID or QS_ACCESS_KEY
- Secret Access Key: QS_SECRET_ACCESS_KEY or QS_SECRET_KEY
Swift
Swift refers to Openstack Object Storage. Commercial implementations of
that being:
- Rackspace Cloud Files
- Memset Memstore
- OVH Object Storage
- Oracle Cloud Storage
- IBM Bluemix Cloud ObjectStorage Swift
Paths are specified as remote:container (or remote: for the lsd
command.) You may put subdirectories in too, eg
remote:container/path/to/dir.
Here is an example of making a swift configuration. First run
rclone config
This will guide you through an interactive setup process.
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Box
\ "box"
5 / Cache a remote
\ "cache"
6 / Dropbox
\ "dropbox"
7 / Encrypt/Decrypt a remote
\ "crypt"
8 / FTP Connection
\ "ftp"
9 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
10 / Google Drive
\ "drive"
11 / Hubic
\ "hubic"
12 / Local Disk
\ "local"
13 / Microsoft Azure Blob Storage
\ "azureblob"
14 / Microsoft OneDrive
\ "onedrive"
15 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
16 / Pcloud
\ "pcloud"
17 / QingCloud Object Storage
\ "qingstor"
18 / SSH/SFTP Connection
\ "sftp"
19 / Webdav
\ "webdav"
20 / Yandex Disk
\ "yandex"
21 / http Connection
\ "http"
Storage> swift
Get swift credentials from environment variables in standard OpenStack form.
Choose a number from below, or type in your own value
1 / Enter swift credentials in the next step
\ "false"
2 / Get swift credentials from environment vars. Leave other fields blank if using this.
\ "true"
env_auth> true
User name to log in (OS_USERNAME).
user>
API key or password (OS_PASSWORD).
key>
Authentication URL for server (OS_AUTH_URL).
Choose a number from below, or type in your own value
1 / Rackspace US
\ "https://auth.api.rackspacecloud.com/v1.0"
2 / Rackspace UK
\ "https://lon.auth.api.rackspacecloud.com/v1.0"
3 / Rackspace v2
\ "https://identity.api.rackspacecloud.com/v2.0"
4 / Memset Memstore UK
\ "https://auth.storage.memset.com/v1.0"
5 / Memset Memstore UK v2
\ "https://auth.storage.memset.com/v2.0"
6 / OVH
\ "https://auth.cloud.ovh.net/v2.0"
auth>
User ID to log in - optional - most swift systems use user and leave this blank (v3 auth) (OS_USER_ID).
user_id>
User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME)
domain>
Tenant name - optional for v1 auth, this or tenant_id required otherwise (OS_TENANT_NAME or OS_PROJECT_NAME)
tenant>
Tenant ID - optional for v1 auth, this or tenant required otherwise (OS_TENANT_ID)
tenant_id>
Tenant domain - optional (v3 auth) (OS_PROJECT_DOMAIN_NAME)
tenant_domain>
Region name - optional (OS_REGION_NAME)
region>
Storage URL - optional (OS_STORAGE_URL)
storage_url>
Auth Token from alternate authentication - optional (OS_AUTH_TOKEN)
auth_token>
AuthVersion - optional - set to (1,2,3) if your auth URL has no version (ST_AUTH_VERSION)
auth_version>
Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE)
Choose a number from below, or type in your own value
1 / Public (default, choose this if not sure)
\ "public"
2 / Internal (use internal service net)
\ "internal"
3 / Admin
\ "admin"
endpoint_type>
Remote config
--------------------
[test]
env_auth = true
user =
key =
auth =
user_id =
domain =
tenant =
tenant_id =
tenant_domain =
region =
storage_url =
auth_token =
auth_version =
endpoint_type =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
This remote is called remote and can now be used like this
See all containers
rclone lsd remote:
Make a new container
rclone mkdir remote:container
List the contents of a container
rclone ls remote:container
Sync /home/local/directory to the remote container, deleting any excess
files in the container.
rclone sync /home/local/directory remote:container
Configuration from an Openstack credentials file
An Opentstack credentials file typically looks something something like
this (without the comments)
export OS_AUTH_URL=https://a.provider.net/v2.0
export OS_TENANT_ID=ffffffffffffffffffffffffffffffff
export OS_TENANT_NAME="1234567890123456"
export OS_USERNAME="123abc567xy"
echo "Please enter your OpenStack Password: "
read -sr OS_PASSWORD_INPUT
export OS_PASSWORD=$OS_PASSWORD_INPUT
export OS_REGION_NAME="SBG1"
if [ -z "$OS_REGION_NAME" ]; then unset OS_REGION_NAME; fi
The config file needs to look something like this where $OS_USERNAME
represents the value of the OS_USERNAME variable - 123abc567xy in the
example above.
[remote]
type = swift
user = $OS_USERNAME
key = $OS_PASSWORD
auth = $OS_AUTH_URL
tenant = $OS_TENANT_NAME
Note that you may (or may not) need to set region too - try without
first.
Configuration from the environment
If you prefer you can configure rclone to use swift using a standard set
of OpenStack environment variables.
When you run through the config, make sure you choose true for env_auth
and leave everything else blank.
rclone will then set any empty config parameters from the environment
using standard OpenStack environment variables. There is a list of the
variables in the docs for the swift library.
Using an alternate authentication method
If your OpenStack installation uses a non-standard authentication method
that might not be yet supported by rclone or the underlying swift
library, you can authenticate externally (e.g. calling manually the
openstack commands to get a token). Then, you just need to pass the two
configuration variables auth_token and storage_url. If they are both
provided, the other variables are ignored. rclone will not try to
authenticate but instead assume it is already authenticated and use
these two variables to access the OpenStack installation.
Using rclone without a config file
You can use rclone with swift without a config file, if desired, like
this:
source openstack-credentials-file
export RCLONE_CONFIG_MYREMOTE_TYPE=swift
export RCLONE_CONFIG_MYREMOTE_ENV_AUTH=true
rclone lsd myremote:
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
--update and --use-server-modtime
As noted below, the modified time is stored on metadata on the object.
It is used by default for all operations that require checking the time
a file was last updated. It allows rclone to treat the remote more like
a true filesystem, but it is inefficient because it requires an extra
API call to retrieve the metadata.
For many operations, the time the object was last uploaded to the remote
is sufficient to determine if it is "dirty". By using --update along
with --use-server-modtime, you can avoid the extra API call and simply
upload files whose local modtime is newer than the time it was last
uploaded.
Specific options
Here are the command line options specific to this cloud storage system.
--swift-chunk-size=SIZE
Above this size files will be chunked into a _segments container. The
default for this is 5GB which is its maximum value.
Modified time
The modified time is stored as metadata on the object as
X-Object-Meta-Mtime as floating point since the epoch accurate to 1 ns.
This is a defacto standard (used in the official python-swiftclient
amongst others) for storing the modification time for an object.
Limitations
The Swift API doesn't return a correct MD5SUM for segmented files
(Dynamic or Static Large Objects) so rclone won't check or use the
MD5SUM for these.
Troubleshooting
Rclone gives Failed to create file system for "remote:": Bad Request
Due to an oddity of the underlying swift library, it gives a "Bad
Request" error rather than a more sensible error when the authentication
fails for Swift.
So this most likely means your username / password is wrong. You can
investigate further with the --dump-bodies flag.
This may also be caused by specifying the region when you shouldn't have
(eg OVH).
Rclone gives Failed to create file system: Response didn't have storage storage url and auth token
This is most likely caused by forgetting to specify your tenant when
setting up a swift remote.
pCloud
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
The initial setup for pCloud involves getting a token from pCloud which
you need to do in your browser. rclone config walks you through it.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Box
\ "box"
5 / Dropbox
\ "dropbox"
6 / Encrypt/Decrypt a remote
\ "crypt"
7 / FTP Connection
\ "ftp"
8 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
9 / Google Drive
\ "drive"
10 / Hubic
\ "hubic"
11 / Local Disk
\ "local"
12 / Microsoft Azure Blob Storage
\ "azureblob"
13 / Microsoft OneDrive
\ "onedrive"
14 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
15 / Pcloud
\ "pcloud"
16 / QingCloud Object Storage
\ "qingstor"
17 / SSH/SFTP Connection
\ "sftp"
18 / Yandex Disk
\ "yandex"
19 / http Connection
\ "http"
Storage> pcloud
Pcloud App Client Id - leave blank normally.
client_id>
Pcloud App Client Secret - leave blank normally.
client_secret>
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
client_id =
client_secret =
token = {"access_token":"XXX","token_type":"bearer","expiry":"0001-01-01T00:00:00Z"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See the remote setup docs for how to set it up on a machine with no
Internet browser available.
Note that rclone runs a webserver on your local machine to collect the
token as returned from pCloud. This only runs from the moment it opens
your browser to the moment you get back the verification code. This is
on http://127.0.0.1:53682/ and this it may require you to unblock it
temporarily if you are running a host firewall.
Once configured you can then use rclone like this,
List directories in top level of your pCloud
rclone lsd remote:
List all the files in your pCloud
rclone ls remote:
To copy a local directory to an pCloud directory called backup
rclone copy /home/source remote:backup
Modified time and hashes
pCloud allows modification times to be set on objects accurate to 1
second. These will be used to detect whether objects need syncing or
not. In order to set a Modification time pCloud requires the object be
re-uploaded.
pCloud supports MD5 and SHA1 type hashes, so you can use the --checksum
flag.
Deleting files
Deleted files will be moved to the trash. Your subscription level will
determine how long items stay in the trash. rclone cleanup can be used
to empty the trash.
SFTP
SFTP is the Secure (or SSH) File Transfer Protocol.
SFTP runs over SSH v2 and is installed as standard with most modern SSH
installations.
Paths are specified as remote:path. If the path does not begin with a /
it is relative to the home directory of the user. An empty path remote:
refers to the user's home directory.
Note that some SFTP servers will need the leading / - Synology is a good
example of this.
Here is an example of making an SFTP configuration. First run
rclone config
This will guide you through an interactive setup process.
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / FTP Connection
\ "ftp"
7 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
8 / Google Drive
\ "drive"
9 / Hubic
\ "hubic"
10 / Local Disk
\ "local"
11 / Microsoft OneDrive
\ "onedrive"
12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
13 / SSH/SFTP Connection
\ "sftp"
14 / Yandex Disk
\ "yandex"
15 / http Connection
\ "http"
Storage> sftp
SSH host to connect to
Choose a number from below, or type in your own value
1 / Connect to example.com
\ "example.com"
host> example.com
SSH username, leave blank for current username, ncw
user> sftpuser
SSH port, leave blank to use default (22)
port>
SSH password, leave blank to use ssh-agent.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank
y/g/n> n
Path to unencrypted PEM-encoded private key file, leave blank to use ssh-agent.
key_file>
Remote config
--------------------
[remote]
host = example.com
user = sftpuser
port =
pass =
key_file =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
This remote is called remote and can now be used like this:
See all directories in the home directory
rclone lsd remote:
Make a new directory
rclone mkdir remote:path/to/directory
List the contents of a directory
rclone ls remote:path/to/directory
Sync /home/local/directory to the remote directory, deleting any excess
files in the directory.
rclone sync /home/local/directory remote:directory
SSH Authentication
The SFTP remote supports three authentication methods:
- Password
- Key file
- ssh-agent
Key files should be unencrypted PEM-encoded private key files. For
instance /home/$USER/.ssh/id_rsa.
If you don't specify pass or key_file then rclone will attempt to
contact an ssh-agent.
If you set the --sftp-ask-password option, rclone will prompt for a
password when needed and no password has been configured.
ssh-agent on macOS
Note that there seem to be various problems with using an ssh-agent on
macOS due to recent changes in the OS. The most effective work-around
seems to be to start an ssh-agent in each session, eg
eval `ssh-agent -s` && ssh-add -A
And then at the end of the session
eval `ssh-agent -k`
These commands can be used in scripts of course.
Specific options
Here are the command line options specific to this remote.
--sftp-ask-password
Ask for the SFTP password if needed when no password has been
configured.
--ssh-path-override
Override path used by SSH connection. Allows checksum calculation when
SFTP and SSH paths are different. This issue affects among others
Synology NAS boxes.
Shared folders can be found in directories representing volumes
rclone sync /home/local/directory remote:/directory --ssh-path-override /volume2/directory
Home directory can be found in a shared folder called homes
rclone sync /home/local/directory remote:/home/directory --ssh-path-override /volume1/homes/USER/directory
Modified time
Modified times are stored on the server to 1 second precision.
Modified times are used in syncing and are fully supported.
Some SFTP servers disable setting/modifying the file modification time
after upload (for example, certain configurations of ProFTPd with
mod_sftp). If you are using one of these servers, you can set the option
set_modtime = false in your RClone backend configuration to disable this
behaviour.
Limitations
SFTP supports checksums if the same login has shell access and md5sum or
sha1sum as well as echo are in the remote's PATH. This remote
checksumming (file hashing) is recommended and enabled by default.
Disabling the checksumming may be required if you are connecting to SFTP
servers which are not under your control, and to which the execution of
remote commands is prohibited. Set the configuration option
disable_hashcheck to true to disable checksumming.
Note that some SFTP servers (eg Synology) the paths are different for
SSH and SFTP so the hashes can't be calculated properly. For them using
disable_hashcheck is a good idea.
The only ssh agent supported under Windows is Putty's pageant.
The Go SSH library disables the use of the aes128-cbc cipher by default,
due to security concerns. This can be re-enabled on a per-connection
basis by setting the use_insecure_cipher setting in the configuration
file to true. Further details on the insecurity of this cipher can be
found [in this paper] (http://www.isg.rhul.ac.uk/~kp/SandPfinal.pdf).
SFTP isn't supported under plan9 until this issue is fixed.
Note that since SFTP isn't HTTP based the following flags don't work
with it: --dump-headers, --dump-bodies, --dump-auth
Note that --timeout isn't supported (but --contimeout is).
WebDAV
Paths are specified as remote:path
Paths may be as deep as required, eg remote:directory/subdirectory.
To configure the WebDAV remote you will need to have a URL for it, and a
username and password. If you know what kind of system you are
connecting to then rclone can enable extra features.
Here is an example of how to make a remote called remote. First run:
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Box
\ "box"
5 / Dropbox
\ "dropbox"
6 / Encrypt/Decrypt a remote
\ "crypt"
7 / FTP Connection
\ "ftp"
8 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
9 / Google Drive
\ "drive"
10 / Hubic
\ "hubic"
11 / Local Disk
\ "local"
12 / Microsoft Azure Blob Storage
\ "azureblob"
13 / Microsoft OneDrive
\ "onedrive"
14 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
15 / Pcloud
\ "pcloud"
16 / QingCloud Object Storage
\ "qingstor"
17 / SSH/SFTP Connection
\ "sftp"
18 / WebDAV
\ "webdav"
19 / Yandex Disk
\ "yandex"
20 / http Connection
\ "http"
Storage> webdav
URL of http host to connect to
Choose a number from below, or type in your own value
1 / Connect to example.com
\ "https://example.com"
url> https://example.com/remote.php/webdav/
Name of the WebDAV site/service/software you are using
Choose a number from below, or type in your own value
1 / Nextcloud
\ "nextcloud"
2 / Owncloud
\ "owncloud"
3 / Sharepoint
\ "sharepoint"
4 / Other site/service or software
\ "other"
vendor> 1
User name
user> user
Password.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank
y/g/n> y
Enter the password:
password:
Confirm the password:
password:
Remote config
--------------------
[remote]
url = https://example.com/remote.php/webdav/
vendor = nextcloud
user = user
pass = *** ENCRYPTED ***
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
Once configured you can then use rclone like this,
List directories in top level of your WebDAV
rclone lsd remote:
List all the files in your WebDAV
rclone ls remote:
To copy a local directory to an WebDAV directory called backup
rclone copy /home/source remote:backup
Modified time and hashes
Plain WebDAV does not support modified times. However when used with
Owncloud or Nextcloud rclone will support modified times.
Hashes are not supported.
Owncloud
Click on the settings cog in the bottom right of the page and this will
show the WebDAV URL that rclone needs in the config step. It will look
something like https://example.com/remote.php/webdav/.
Owncloud supports modified times using the X-OC-Mtime header.
Nextcloud
This is configured in an identical way to Owncloud. Note that Nextcloud
does not support streaming of files (rcat) whereas Owncloud does. This
may be fixed in the future.
Put.io
put.io can be accessed in a read only way using webdav.
Configure the url as https://webdav.put.io and use your normal account
username and password for user and pass. Set the vendor to other.
Your config file should end up looking like this:
[putio]
type = webdav
url = https://webdav.put.io
vendor = other
user = YourUserName
pass = encryptedpassword
If you are using put.io with rclone mount then use the --read-only flag
to signal to the OS that it can't write to the mount.
For more help see the put.io webdav docs.
Sharepoint
Can be used with Sharepoint provided by OneDrive for Business or
Office365 Education Accounts. This feature is only needed for a few of
these Accounts, mostly Office365 Education ones. These accounts are
sometimes not verified by the domain owner github#1975
This means that these accounts can't be added using the official API
(other Accounts should work with the "onedrive" option). However, it is
possible to access them using webdav.
To use a sharepoint remote with rclone, add it like this: First, you
need to get your remote's URL:
- Go here to open your OneDrive or to sign in
- Now take a look at your address bar, the URL should look like this:
https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/_layouts/15/onedrive.aspx
You'll only need this URL upto the email address. After that, you'll
most likely want to add "/Documents". That subdirectory contains the
actual data stored on your OneDrive.
Add the remote to rclone like this: Configure the url as
https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/Documents
and use your normal account email and password for user and pass. If you
have 2FA enabled, you have to generate an app password. Set the vendor
to sharepoint.
Your config file should look like this:
[sharepoint]
type = webdav
url = https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/Documents
vendor = other
user = YourEmailAddress
pass = encryptedpassword
Yandex Disk
Yandex Disk is a cloud storage solution created by Yandex.
Yandex paths may be as deep as required, eg
remote:directory/subdirectory.
Here is an example of making a yandex configuration. First run
rclone config
This will guide you through an interactive setup process:
No remotes found - make a new one
n) New remote
s) Set configuration password
n/s> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
1 / Amazon Drive
\ "amazon cloud drive"
2 / Amazon S3 (also Dreamhost, Ceph, Minio)
\ "s3"
3 / Backblaze B2
\ "b2"
4 / Dropbox
\ "dropbox"
5 / Encrypt/Decrypt a remote
\ "crypt"
6 / Google Cloud Storage (this is not Google Drive)
\ "google cloud storage"
7 / Google Drive
\ "drive"
8 / Hubic
\ "hubic"
9 / Local Disk
\ "local"
10 / Microsoft OneDrive
\ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
\ "swift"
12 / SSH/SFTP Connection
\ "sftp"
13 / Yandex Disk
\ "yandex"
Storage> 13
Yandex Client Id - leave blank normally.
client_id>
Yandex Client Secret - leave blank normally.
client_secret>
Remote config
Use auto config?
* Say Y if not sure
* Say N if you are working on a remote or headless machine
y) Yes
n) No
y/n> y
If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth
Log in and authorize rclone for access
Waiting for code...
Got code
--------------------
[remote]
client_id =
client_secret =
token = {"access_token":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","token_type":"bearer","expiry":"2016-12-29T12:27:11.362788025Z"}
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
See the remote setup docs for how to set it up on a machine with no
Internet browser available.
Note that rclone runs a webserver on your local machine to collect the
token as returned from Yandex Disk. This only runs from the moment it
opens your browser to the moment you get back the verification code.
This is on http://127.0.0.1:53682/ and this it may require you to
unblock it temporarily if you are running a host firewall.
Once configured you can then use rclone like this,
See top level directories
rclone lsd remote:
Make a new directory
rclone mkdir remote:directory
List the contents of a directory
rclone ls remote:directory
Sync /home/local/directory to the remote path, deleting any excess files
in the path.
rclone sync /home/local/directory remote:directory
--fast-list
This remote supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone docs for more
details.
Modified time
Modified times are supported and are stored accurate to 1 ns in custom
metadata called rclone_modified in RFC3339 with nanoseconds format.
MD5 checksums
MD5 checksums are natively supported by Yandex Disk.
Emptying Trash
If you wish to empty your trash you can use the rclone cleanup remote:
command which will permanently delete all your trashed files. This
command does not take any path arguments.
Local Filesystem
Local paths are specified as normal filesystem paths, eg
/path/to/wherever, so
rclone sync /home/source /tmp/destination
Will sync /home/source to /tmp/destination
These can be configured into the config file for consistencies sake, but
it is probably easier not to.
Modified time
Rclone reads and writes the modified time using an accuracy determined
by the OS. Typically this is 1ns on Linux, 10 ns on Windows and 1 Second
on OS X.
Filenames
Filenames are expected to be encoded in UTF-8 on disk. This is the
normal case for Windows and OS X.
There is a bit more uncertainty in the Linux world, but new
distributions will have UTF-8 encoded files names. If you are using an
old Linux filesystem with non UTF-8 file names (eg latin1) then you can
use the convmv tool to convert the filesystem to UTF-8. This tool is
available in most distributions' package managers.
If an invalid (non-UTF8) filename is read, the invalid characters will
be replaced with the unicode replacement character, '<27>'. rclone will
emit a debug message in this case (use -v to see), eg
Local file system at .: Replacing invalid UTF-8 characters in "gro\xdf"
Long paths on Windows
Rclone handles long paths automatically, by converting all paths to long
UNC paths which allows paths up to 32,767 characters.
This is why you will see that your paths, for instance c:\files is
converted to the UNC path \\?\c:\files in the output, and \\server\share
is converted to \\?\UNC\server\share.
However, in rare cases this may cause problems with buggy file system
drivers like EncFS. To disable UNC conversion globally, add this to your
.rclone.conf file:
[local]
nounc = true
If you want to selectively disable UNC, you can add it to a separate
entry like this:
[nounc]
type = local
nounc = true
And use rclone like this:
rclone copy c:\src nounc:z:\dst
This will use UNC paths on c:\src but not on z:\dst. Of course this will
cause problems if the absolute path length of a file exceeds 258
characters on z, so only use this option if you have to.
Specific options
Here are the command line options specific to local storage
--copy-links, -L
Normally rclone will ignore symlinks or junction points (which behave
like symlinks under Windows).
If you supply this flag then rclone will follow the symlink and copy the
pointed to file or directory.
This flag applies to all commands.
For example, supposing you have a directory structure like this
$ tree /tmp/a
/tmp/a
├── b -> ../b
├── expected -> ../expected
├── one
└── two
└── three
Then you can see the difference with and without the flag like this
$ rclone ls /tmp/a
6 one
6 two/three
and
$ rclone -L ls /tmp/a
4174 expected
6 one
6 two/three
6 b/two
6 b/one
--local-no-check-updated
Don't check to see if the files change during upload.
Normally rclone checks the size and modification time of files as they
are being uploaded and aborts with a message which starts
can't copy - source file is being updated if the file changes during
upload.
However on some file systems this modification time check may fail (eg
Glusterfs #2206) so this check can be disabled with this flag.
--local-no-unicode-normalization
This flag is deprecated now. Rclone no longer normalizes unicode file
names, but it compares them with unicode normalization in the sync
routine instead.
--one-file-system, -x
This tells rclone to stay in the filesystem specified by the root and
not to recurse into different file systems.
For example if you have a directory hierarchy like this
root
├── disk1 - disk1 mounted on the root
│   └── file3 - stored on disk1
├── disk2 - disk2 mounted on the root
│   └── file4 - stored on disk12
├── file1 - stored on the root disk
└── file2 - stored on the root disk
Using rclone --one-file-system copy root remote: will only copy file1
and file2. Eg
$ rclone -q --one-file-system ls root
0 file1
0 file2
$ rclone -q ls root
0 disk1/file3
0 disk2/file4
0 file1
0 file2
NB Rclone (like most unix tools such as du, rsync and tar) treats a bind
mount to the same device as being on the same filesystem.
NB This flag is only available on Unix based systems. On systems where
it isn't supported (eg Windows) it will not appear as an valid flag.
--skip-links
This flag disables warning messages on skipped symlinks or junction
points, as you explicitly acknowledge that they should be skipped.
Changelog
- v1.42 - 2018-06-16
- New backends
- OpenDrive (Oliver Heyme, Jakub Karlicek, ncw)
- New commands
- deletefile command (Filip Bartodziej)
- New Features
- copy, move: Copy single files directly, don't use --files-from
work-around
- this makes them much more efficient
- Implement --max-transfer flag to quit transferring at a limit
- make exit code 8 for --max-transfer exceeded
- copy: copy empty source directories to destination (Ishuah
Kariuki)
- check: Add --one-way flag (Kasper Byrdal Nielsen)
- Add siginfo handler for macOS for ctrl-T stats (kubatasiemski)
- rc
- add core/gc to run a garbage collection on demand
- enable go profiling by default on the --rc port
- return error from remote on failure
- lsf
- Add --absolute flag to add a leading / onto path names
- Add --csv flag for compliant CSV output
- Add 'm' format specifier to show the MimeType
- Implement 'i' format for showing object ID
- lsjson
- Add MimeType to the output
- Add ID field to output to show Object ID
- Add --retries-sleep flag (Benjamin Joseph Dag)
- Oauth tidy up web page and error handling (Henning Surmeier)
- Bug Fixes
- Password prompt output with --log-file fixed for unix (Filip
Bartodziej)
- Calculate ModifyWindow each time on the fly to fix various
problems (Stefan Breunig)
- Mount
- Only print "File.rename error" if there actually is an error
(Stefan Breunig)
- Delay rename if file has open writers instead of failing
outright (Stefan Breunig)
- Ensure atexit gets run on interrupt
- macOS enhancements
- Make --noappledouble --noapplexattr
- Add --volname flag and remove special chars from it
- Make Get/List/Set/Remove xattr return ENOSYS for efficiency
- Make --daemon work for macOS without CGO
- VFS
- Add --vfs-read-chunk-size and --vfs-read-chunk-size-limit
(Fabian Möller)
- Fix ChangeNotify for new or changed folders (Fabian Möller)
- Local
- Fix symlink/junction point directory handling under Windows
- NB you will need to add -L to your command line to copy
files with reparse points
- Cache
- Add non cached dirs on notifications (Remus Bunduc)
- Allow root to be expired from rc (Remus Bunduc)
- Clean remaining empty folders from temp upload path (Remus
Bunduc)
- Cache lists using batch writes (Remus Bunduc)
- Use secure websockets for HTTPS Plex addresses (John Clayton)
- Reconnect plex websocket on failures (Remus Bunduc)
- Fix panic when running without plex configs (Remus Bunduc)
- Fix root folder caching (Remus Bunduc)
- Crypt
- Check the crypted hash of files when uploading for extra data
security
- Dropbox
- Make Dropbox for business folders accessible using an initial /
in the path
- Google Cloud Storage
- Low level retry all operations if necessary
- Google Drive
- Add --drive-acknowledge-abuse to download flagged files
- Add --drive-alternate-export to fix large doc export
- Don't attempt to choose Team Drives when using rclone config
create
- Fix change list polling with team drives
- Fix ChangeNotify for folders (Fabian Möller)
- Fix about (and df on a mount) for team drives
- Onedrive
- Errorhandler for onedrive for business requests (Henning
Surmeier)
- S3
- Adjust upload concurrency with --s3-upload-concurrency
(themylogin)
- Fix --s3-chunk-size which was always using the minimum
- SFTP
- Add --ssh-path-override flag (Piotr Oleszczyk)
- Fix slow downloads for long latency connections
- Webdav
- Add workarounds for biz.mail.ru
- Ignore Reason-Phrase in status line to fix 4shared (Rodrigo)
- Better error message generation
- v1.41 - 2018-04-28
- New backends
- Mega support added
- Webdav now supports SharePoint cookie authentication (hensur)
- New commands
- link: create public link to files and folders (Stefan Breunig)
- about: gets quota info from a remote (a-roussos, ncw)
- hashsum: a generic tool for any hash to produce md5sum like
output
- New Features
- lsd: Add -R flag and fix and update docs for all ls commands
- ncdu: added a "refresh" key - CTRL-L (Keith Goldfarb)
- serve restic: Add append-only mode (Steve Kriss)
- serve restic: Disallow overwriting files in append-only mode
(Alexander Neumann)
- serve restic: Print actual listener address (Matt Holt)
- size: Add --json flag (Matthew Holt)
- sync: implement --ignore-errors (Mateusz Pabian)
- dedupe: Add dedupe largest functionality (Richard Yang)
- fs: Extend SizeSuffix to include TB and PB for rclone about
- fs: add --dump goroutines and --dump openfiles for debugging
- rc: implement core/memstats to print internal memory usage info
- rc: new call rc/pid (Michael P. Dubner)
- Compile
- Drop support for go1.6
- Release
- Fix make tarball (Chih-Hsuan Yen)
- Bug Fixes
- filter: fix --min-age and --max-age together check
- fs: limit MaxIdleConns and MaxIdleConnsPerHost in transport
- lsd,lsf: make sure all times we output are in local time
- rc: fix setting bwlimit to unlimited
- rc: take note of the --rc-addr flag too as per the docs
- Mount
- Use About to return the correct disk total/used/free (eg in df)
- Set --attr-timeout default to 1s - fixes:
- rclone using too much memory
- rclone not serving files to samba
- excessive time listing directories
- Fix df -i (upstream fix)
- VFS
- Filter files . and .. from directory listing
- Only make the VFS cache if --vfs-cache-mode > Off
- Local
- Add --local-no-check-updated to disable updated file checks
- Retry remove on Windows sharing violation error
- Cache
- Flush the memory cache after close
- Purge file data on notification
- Always forget parent dir for notifications
- Integrate with Plex websocket
- Add rc cache/stats (seuffert)
- Add info log on notification
- Box
- Fix failure reading large directories - parse file/directory
size as float
- Dropbox
- Fix crypt+obfuscate on dropbox
- Fix repeatedly uploading the same files
- FTP
- Work around strange response from box FTP server
- More workarounds for FTP servers to fix mkParentDir error
- Fix no error on listing non-existent directory
- Google Cloud Storage
- Add service_account_credentials (Matt Holt)
- Detect bucket presence by listing it - minimises permissions
needed
- Ignore zero length directory markers
- Google Drive
- Add service_account_credentials (Matt Holt)
- Fix directory move leaving a hardlinked directory behind
- Return proper google errors when Opening files
- When initialized with a filepath, optional features used
incorrect root path (Stefan Breunig)
- HTTP
- Fix sync for servers which don't return Content-Length in HEAD
- Onedrive
- Add QuickXorHash support for OneDrive for business
- Fix socket leak in multipart session upload
- S3
- Look in S3 named profile files for credentials
- Add --s3-disable-checksum to disable checksum uploading (Chris
Redekop)
- Hierarchical configuration support (Giri Badanahatti)
- Add in config for all the supported S3 providers
- Add One Zone Infrequent Access storage class (Craig Rachel)
- Add --use-server-modtime support (Peter Baumgartner)
- Add --s3-chunk-size option to control multipart uploads
- Ignore zero length directory markers
- SFTP
- Update docs to match code, fix typos and clarify
disable_hashcheck prompt (Michael G. Noll)
- Update docs with Synology quirks
- Fail soft with a debug on hash failure
- Swift
- Add --use-server-modtime support (Peter Baumgartner)
- Webdav
- Support SharePoint cookie authentication (hensur)
- Strip leading and trailing / off root
- v1.40 - 2018-03-19
- New backends
- Alias backend to create aliases for existing remote names
(Fabian Möller)
- New commands
- lsf: list for parsing purposes (Jakub Tasiemski)
- by default this is a simple non recursive list of files and
directories
- it can be configured to add more info in an easy to parse
way
- serve restic: for serving a remote as a Restic REST endpoint
- This enables restic to use any backends that rclone can
access
- Thanks Alexander Neumann for help, patches and review
- rc: enable the remote control of a running rclone
- The running rclone must be started with --rc and related
flags.
- Currently there is support for bwlimit, and flushing for
mount and cache.
- New Features
- --max-delete flag to add a delete threshold (Bjørn Erik
Pedersen)
- All backends now support RangeOption for ranged Open
- cat: Use RangeOption for limited fetches to make more
efficient
- cryptcheck: make reading of nonce more efficient with
RangeOption
- serve http/webdav/restic
- support SSL/TLS
- add --user --pass and --htpasswd for authentication
- copy/move: detect file size change during copy/move and abort
transfer (ishuah)
- cryptdecode: added option to return encrypted file names.
(ishuah)
- lsjson: add --encrypted to show encrypted name (Jakub Tasiemski)
- Add --stats-file-name-length to specify the printed file name
length for stats (Will Gunn)
- Compile
- Code base was shuffled and factored
- backends moved into a backend directory
- large packages split up
- See the CONTRIBUTING.md doc for info as to what lives where
now
- Update to using go1.10 as the default go version
- Implement daily full integration tests
- Release
- Include a source tarball and sign it and the binaries
- Sign the git tags as part of the release process
- Add .deb and .rpm packages as part of the build
- Make a beta release for all branches on the main repo (but not
pull requests)
- Bug Fixes
- config: fixes errors on non existing config by loading config
file only on first access
- config: retry saving the config after failure (Mateusz)
- sync: when using --backup-dir don't delete files if we can't set
their modtime
- this fixes odd behaviour with Dropbox and --backup-dir
- fshttp: fix idle timeouts for HTTP connections
- serve http: fix serving files with : in - fixes
- Fix --exclude-if-present to ignore directories which it doesn't
have permission for (Iakov Davydov)
- Make accounting work properly with crypt and b2
- remove --no-traverse flag because it is obsolete
- Mount
- Add --attr-timeout flag to control attribute caching in kernel
- this now defaults to 0 which is correct but less efficient
- see the mount docs for more info
- Add --daemon flag to allow mount to run in the background
(ishuah)
- Fix: Return ENOSYS rather than EIO on attempted link
- This fixes FileZilla accessing an rclone mount served over
sftp.
- Fix setting modtime twice
- Mount tests now run on CI for Linux (mount & cmount)/Mac/Windows
- Many bugs fixed in the VFS layer - see below
- VFS
- Many fixes for --vfs-cache-mode writes and above
- Update cached copy if we know it has changed (fixes stale
data)
- Clean path names before using them in the cache
- Disable cache cleaner if --vfs-cache-poll-interval=0
- Fill and clean the cache immediately on startup
- Fix Windows opening every file when it stats the file
- Fix applying modtime for an open Write Handle
- Fix creation of files when truncating
- Write 0 bytes when flushing unwritten handles to avoid race
conditions in FUSE
- Downgrade "poll-interval is not supported" message to Info
- Make OpenFile and friends return EINVAL if O_RDONLY and O_TRUNC
- Local
- Downgrade "invalid cross-device link: trying copy" to debug
- Make DirMove return fs.ErrorCantDirMove to allow fallback to
Copy for cross device
- Fix race conditions updating the hashes
- Cache
- Add support for polling - cache will update when remote changes
on supported backends
- Reduce log level for Plex api
- Fix dir cache issue
- Implement --cache-db-wait-time flag
- Improve efficiency with RangeOption and RangeSeek
- Fix dirmove with temp fs enabled
- Notify vfs when using temp fs
- Offline uploading
- Remote control support for path flushing
- Amazon cloud drive
- Rclone no longer has any working keys - disable integration
tests
- Implement DirChangeNotify to notify cache/vfs/mount of changes
- Azureblob
- Don't check for bucket/container presense if listing was OK
- this makes rclone do one less request per invocation
- Improve accounting for chunked uploads
- Backblaze B2
- Don't check for bucket/container presense if listing was OK
- this makes rclone do one less request per invocation
- Box
- Improve accounting for chunked uploads
- Dropbox
- Fix custom oauth client parameters
- Google Cloud Storage
- Don't check for bucket/container presense if listing was OK
- this makes rclone do one less request per invocation
- Google Drive
- Migrate to api v3 (Fabian Möller)
- Add scope configuration and root folder selection
- Add --drive-impersonate for service accounts
- thanks to everyone who tested, explored and contributed docs
- Add --drive-use-created-date to use created date as modified
date (nbuchanan)
- Request the export formats only when required
- This makes rclone quicker when there are no google docs
- Fix finding paths with latin1 chars (a workaround for a drive
bug)
- Fix copying of a single Google doc file
- Fix --drive-auth-owner-only to look in all directories
- HTTP
- Fix handling of directories with & in
- Onedrive
- Removed upload cutoff and always do session uploads
- this stops the creation of multiple versions on business
onedrive
- Overwrite object size value with real size when reading file.
(Victor)
- this fixes oddities when onedrive misreports the size of
images
- Pcloud
- Remove unused chunked upload flag and code
- Qingstor
- Don't check for bucket/container presense if listing was OK
- this makes rclone do one less request per invocation
- S3
- Support hashes for multipart files (Chris Redekop)
- Initial support for IBM COS (S3) (Giri Badanahatti)
- Update docs to discourage use of v2 auth with CEPH and others
- Don't check for bucket/container presense if listing was OK
- this makes rclone do one less request per invocation
- Fix server side copy and set modtime on files with + in
- SFTP
- Add option to disable remote hash check command execution (Jon
Fautley)
- Add --sftp-ask-password flag to prompt for password when needed
(Leo R. Lundgren)
- Add set_modtime configuration option
- Fix following of symlinks
- Fix reading config file outside of Fs setup
- Fix reading $USER in username fallback not $HOME
- Fix running under crontab - Use correct OS way of reading
username
- Swift
- Fix refresh of authentication token
- in v1.39 a bug was introduced which ignored new tokens -
this fixes it
- Fix extra HEAD transaction when uploading a new file
- Don't check for bucket/container presense if listing was OK
- this makes rclone do one less request per invocation
- Webdav
- Add new time formats to support mydrive.ch and others
- v1.39 - 2017-12-23
- New backends
- WebDAV
- tested with nextcloud, owncloud, put.io and others!
- Pcloud
- cache - wraps a cache around other backends (Remus Bunduc)
- useful in combination with mount
- NB this feature is in beta so use with care
- New commands
- serve command with subcommands:
- serve webdav: this implements a webdav server for any rclone
remote.
- serve http: command to serve a remote over HTTP
- config: add sub commands for full config file management
- create/delete/dump/edit/file/password/providers/show/update
- touch: to create or update the timestamp of a file (Jakub
Tasiemski)
- New Features
- curl install for rclone (Filip Bartodziej)
- --stats now shows percentage, size, rate and ETA in condensed
form (Ishuah Kariuki)
- --exclude-if-present to exclude a directory if a file is present
(Iakov Davydov)
- rmdirs: add --leave-root flag (lewpam)
- move: add --delete-empty-src-dirs flag to remove dirs after move
(Ishuah Kariuki)
- Add --dump flag, introduce --dump requests, responses and remove
--dump-auth, --dump-filters
- Obscure X-Auth-Token: from headers when dumping too
- Document and implement exit codes for different failure modes
(Ishuah Kariuki)
- Compile
- Bug Fixes
- Retry lots more different types of errors to make multipart
transfers more reliable
- Save the config before asking for a token, fixes disappearing
oauth config
- Warn the user if --include and --exclude are used together
(Ernest Borowski)
- Fix duplicate files (eg on Google drive) causing spurious copies
- Allow trailing and leading whitespace for passwords (Jason Rose)
- ncdu: fix crashes on empty directories
- rcat: fix goroutine leak
- moveto/copyto: Fix to allow copying to the same name
- Mount
- --vfs-cache mode to make writes into mounts more reliable.
- this requires caching files on the disk (see --cache-dir)
- As this is a new feature, use with care
- Use sdnotify to signal systemd the mount is ready (Fabian
Möller)
- Check if directory is not empty before mounting (Ernest
Borowski)
- Local
- Add error message for cross file system moves
- Fix equality check for times
- Dropbox
- Rework multipart upload
- buffer the chunks when uploading large files so they can be
retried
- change default chunk size to 48MB now we are buffering them
in memory
- retry every error after the first chunk is done successfully
- Fix error when renaming directories
- Swift
- Fix crash on bad authentication
- Google Drive
- Add service account support (Tim Cooijmans)
- S3
- Make it work properly with Digital Ocean Spaces (Andrew
Starr-Bochicchio)
- Fix crash if a bad listing is received
- Add support for ECS task IAM roles (David Minor)
- Backblaze B2
- Fix multipart upload retries
- Fix --hard-delete to make it work 100% of the time
- Swift
- Allow authentication with storage URL and auth key (Giovanni
Pizzi)
- Add new fields for swift configuration to support IBM Bluemix
Swift (Pierre Carlson)
- Add OS_TENANT_ID and OS_USER_ID to config
- Allow configs with user id instead of user name
- Check if swift segments container exists before creating (John
Leach)
- Fix memory leak in swift transfers (upstream fix)
- SFTP
- Add option to enable the use of aes128-cbc cipher (Jon Fautley)
- Amazon cloud drive
- Fix download of large files failing with "Only one auth
mechanism allowed"
- crypt
- Option to encrypt directory names or leave them intact
- Implement DirChangeNotify (Fabian Möller)
- onedrive
- Add option to choose resourceURL during setup of OneDrive
Business account if more than one is available for user
- v1.38 - 2017-09-30
- New backends
- Azure Blob Storage (thanks Andrei Dragomir)
- Box
- Onedrive for Business (thanks Oliver Heyme)
- QingStor from QingCloud (thanks wuyu)
- New commands
- rcat - read from standard input and stream upload
- tree - shows a nicely formatted recursive listing
- cryptdecode - decode crypted file names (thanks ishuah)
- config show - print the config file
- config file - print the config file location
- New Features
- Empty directories are deleted on sync
- dedupe - implement merging of duplicate directories
- check and cryptcheck made more consistent and use less memory
- cleanup for remaining remotes (thanks ishuah)
- --immutable for ensuring that files don't change (thanks Jacob
McNamee)
- --user-agent option (thanks Alex McGrath Kraak)
- --disable flag to disable optional features
- --bind flag for choosing the local addr on outgoing connections
- Support for zsh auto-completion (thanks bpicode)
- Stop normalizing file names but do a normalized compare in sync
- Compile
- Update to using go1.9 as the default go version
- Remove snapd build due to maintenance problems
- Bug Fixes
- Improve retriable error detection which makes multipart uploads
better
- Make check obey --ignore-size
- Fix bwlimit toggle in conjunction with schedules (thanks
cbruegg)
- config ensures newly written config is on the same mount
- Local
- Revert to copy when moving file across file system boundaries
- --skip-links to suppress symlink warnings (thanks Zhiming Wang)
- Mount
- Re-use rcat internals to support uploads from all remotes
- Dropbox
- Fix "entry doesn't belong in directory" error
- Stop using deprecated API methods
- Swift
- Fix server side copy to empty container with --fast-list
- Google Drive
- Change the default for --drive-use-trash to true
- S3
- Set session token when using STS (thanks Girish Ramakrishnan)
- Glacier docs and error messages (thanks Jan Varho)
- Read 1000 (not 1024) items in dir listings to fix Wasabi
- Backblaze B2
- Fix SHA1 mismatch when downloading files with no SHA1
- Calculate missing hashes on the fly instead of spooling
- --b2-hard-delete to permanently delete (not hide) files (thanks
John Papandriopoulos)
- Hubic
- Fix creating containers - no longer have to use the default
container
- Swift
- Optionally configure from a standard set of OpenStack
environment vars
- Add endpoint_type config
- Google Cloud Storage
- Fix bucket creation to work with limited permission users
- SFTP
- Implement connection pooling for multiple ssh connections
- Limit new connections per second
- Add support for MD5 and SHA1 hashes where available (thanks
Christian Brüggemann)
- HTTP
- Fix URL encoding issues
- Fix directories with : in
- Fix panic with URL encoded content
- v1.37 - 2017-07-22
- New backends
- FTP - thanks to Antonio Messina
- HTTP - thanks to Vasiliy Tolstov
- New commands
- rclone ncdu - for exploring a remote with a text based user
interface.
- rclone lsjson - for listing with a machine readable output
- rclone dbhashsum - to show Dropbox style hashes of files (local
or Dropbox)
- New Features
- Implement --fast-list flag
- This allows remotes to list recursively if they can
- This uses less transactions (important if you pay for them)
- This may or may not be quicker
- This will use more memory as it has to hold the listing in
memory
- --old-sync-method deprecated - the remaining uses are
covered by --fast-list
- This involved a major re-write of all the listing code
- Add --tpslimit and --tpslimit-burst to limit transactions per
second
- this is useful in conjuction with rclone mount to limit
external apps
- Add --stats-log-level so can see --stats without -v
- Print password prompts to stderr - Hraban Luyat
- Warn about duplicate files when syncing
- Oauth improvements
- allow auth_url and token_url to be set in the config file
- Print redirection URI if using own credentials.
- Don't Mkdir at the start of sync to save transactions
- Compile
- Update build to go1.8.3
- Require go1.6 for building rclone
- Compile 386 builds with "GO386=387" for maximum compatibility
- Bug Fixes
- Fix menu selection when no remotes
- Config saving reworked to not kill the file if disk gets full
- Don't delete remote if name does not change while renaming
- moveto, copyto: report transfers and checks as per move and copy
- Local
- Add --local-no-unicode-normalization flag - Bob Potter
- Mount
- Now supported on Windows using cgofuse and WinFsp - thanks to
Bill Zissimopoulos for much help
- Compare checksums on upload/download via FUSE
- Unmount when program ends with SIGINT (Ctrl+C) or SIGTERM -
Jérôme Vizcaino
- On read only open of file, make open pending until first read
- Make --read-only reject modify operations
- Implement ModTime via FUSE for remotes that support it
- Allow modTime to be changed even before all writers are closed
- Fix panic on renames
- Fix hang on errored upload
- Crypt
- Report the name:root as specified by the user
- Add an "obfuscate" option for filename encryption - Stephen
Harris
- Amazon Drive
- Fix initialization order for token renewer
- Remove revoked credentials, allow oauth proxy config and update
docs
- B2
- Reduce minimum chunk size to 5MB
- Drive
- Add team drive support
- Reduce bandwidth by adding fields for partial responses - Martin
Kristensen
- Implement --drive-shared-with-me flag to view shared with me
files - Danny Tsai
- Add --drive-trashed-only to read only the files in the trash
- Remove obsolete --drive-full-list
- Add missing seek to start on retries of chunked uploads
- Fix stats accounting for upload
- Convert / in names to a unicode equivalent (／)
- Poll for Google Drive changes when mounted
- OneDrive
- Fix the uploading of files with spaces
- Fix initialization order for token renewer
- Display speeds accurately when uploading - Yoni Jah
- Swap to using http://localhost:53682/ as redirect URL - Michael
Ledin
- Retry on token expired error, reset upload body on retry - Yoni
Jah
- Google Cloud Storage
- Add ability to specify location and storage class via config and
command line - thanks gdm85
- Create container if necessary on server side copy
- Increase directory listing chunk to 1000 to increase performance
- Obtain a refresh token for GCS - Steven Lu
- Yandex
- Fix the name reported in log messages (was empty)
- Correct error return for listing empty directory
- Dropbox
- Rewritten to use the v2 API
- Now supports ModTime
- Can only set by uploading the file again
- If you uploaded with an old rclone, rclone may upload
everything again
- Use --size-only or --checksum to avoid this
- Now supports the Dropbox content hashing scheme
- Now supports low level retries
- S3
- Work around eventual consistency in bucket creation
- Create container if necessary on server side copy
- Add us-east-2 (Ohio) and eu-west-2 (London) S3 regions - Zahiar
Ahmed
- Swift, Hubic
- Fix zero length directory markers showing in the subdirectory
listing
- this caused lots of duplicate transfers
- Fix paged directory listings
- this caused duplicate directory errors
- Create container if necessary on server side copy
- Increase directory listing chunk to 1000 to increase performance
- Make sensible error if the user forgets the container
- SFTP
- Add support for using ssh key files
- Fix under Windows
- Fix ssh agent on Windows
- Adapt to latest version of library - Igor Kharin
- v1.36 - 2017-03-18
- New Features
- SFTP remote (Jack Schmidt)
- Re-implement sync routine to work a directory at a time reducing
memory usage
- Logging revamped to be more inline with rsync - now much quieter
- -v only shows transfers
- -vv is for full debug
- --syslog to log to syslog on capable platforms
- Implement --backup-dir and --suffix
- Implement --track-renames (initial implementation by Bjørn Erik
Pedersen)
- Add time-based bandwidth limits (Lukas Loesche)
- rclone cryptcheck: checks integrity of crypt remotes
- Allow all config file variables and options to be set from
environment variables
- Add --buffer-size parameter to control buffer size for copy
- Make --delete-after the default
- Add --ignore-checksum flag (fixed by Hisham Zarka)
- rclone check: Add --download flag to check all the data, not
just hashes
- rclone cat: add --head, --tail, --offset, --count and --discard
- rclone config: when choosing from a list, allow the value to be
entered too
- rclone config: allow rename and copy of remotes
- rclone obscure: for generating encrypted passwords for rclone's
config (T.C. Ferguson)
- Comply with XDG Base Directory specification (Dario Giovannetti)
- this moves the default location of the config file in a
backwards compatible way
- Release changes
- Ubuntu snap support (Dedsec1)
- Compile with go 1.8
- MIPS/Linux big and little endian support
- Bug Fixes
- Fix copyto copying things to the wrong place if the destination
dir didn't exist
- Fix parsing of remotes in moveto and copyto
- Fix --delete-before deleting files on copy
- Fix --files-from with an empty file copying everything
- Fix sync: don't update mod times if --dry-run set
- Fix MimeType propagation
- Fix filters to add ** rules to directory rules
- Local
- Implement -L, --copy-links flag to allow rclone to follow
symlinks
- Open files in write only mode so rclone can write to an rclone
mount
- Fix unnormalised unicode causing problems reading directories
- Fix interaction between -x flag and --max-depth
- Mount
- Implement proper directory handling (mkdir, rmdir, renaming)
- Make include and exclude filters apply to mount
- Implement read and write async buffers - control with
--buffer-size
- Fix fsync on for directories
- Fix retry on network failure when reading off crypt
- Crypt
- Add --crypt-show-mapping to show encrypted file mapping
- Fix crypt writer getting stuck in a loop
- IMPORTANT this bug had the potential to cause data
corruption when
- reading data from a network based remote and
- writing to a crypt on Google Drive
- Use the cryptcheck command to validate your data if you are
concerned
- If syncing two crypt remotes, sync the unencrypted remote
- Amazon Drive
- Fix panics on Move (rename)
- Fix panic on token expiry
- B2
- Fix inconsistent listings and rclone check
- Fix uploading empty files with go1.8
- Constrain memory usage when doing multipart uploads
- Fix upload url not being refreshed properly
- Drive
- Fix Rmdir on directories with trashed files
- Fix "Ignoring unknown object" when downloading
- Add --drive-list-chunk
- Add --drive-skip-gdocs (Károly Oláh)
- OneDrive
- Implement Move
- Fix Copy
- Fix overwrite detection in Copy
- Fix waitForJob to parse errors correctly
- Use token renewer to stop auth errors on long uploads
- Fix uploading empty files with go1.8
- Google Cloud Storage
- Fix depth 1 directory listings
- Yandex
- Fix single level directory listing
- Dropbox
- Normalise the case for single level directory listings
- Fix depth 1 listing
- S3
- Added ca-central-1 region (Jon Yergatian)
- v1.35 - 2017-01-02
- New Features
- moveto and copyto commands for choosing a destination name on
copy/move
- rmdirs command to recursively delete empty directories
- Allow repeated --include/--exclude/--filter options
- Only show transfer stats on commands which transfer stuff
- show stats on any command using the --stats flag
- Allow overlapping directories in move when server side dir move
is supported
- Add --stats-unit option - thanks Scott McGillivray
- Bug Fixes
- Fix the config file being overwritten when two rclones are
running
- Make rclone lsd obey the filters properly
- Fix compilation on mips
- Fix not transferring files that don't differ in size
- Fix panic on nil retry/fatal error
- Mount
- Retry reads on error - should help with reliability a lot
- Report the modification times for directories from the remote
- Add bandwidth accounting and limiting (fixes --bwlimit)
- If --stats provided will show stats and which files are
transferring
- Support R/W files if truncate is set.
- Implement statfs interface so df works
- Note that write is now supported on Amazon Drive
- Report number of blocks in a file - thanks Stefan Breunig
- Crypt
- Prevent the user pointing crypt at itself
- Fix failed to authenticate decrypted block errors
- these will now return the underlying unexpected EOF instead
- Amazon Drive
- Add support for server side move and directory move - thanks
Stefan Breunig
- Fix nil pointer deref on size attribute
- B2
- Use new prefix and delimiter parameters in directory listings
- This makes --max-depth 1 dir listings as used in mount much
faster
- Reauth the account while doing uploads too - should help with
token expiry
- Drive
- Make DirMove more efficient and complain about moving the root
- Create destination directory on Move()
- v1.34 - 2016-11-06
- New Features
- Stop single file and --files-from operations iterating through
the source bucket.
- Stop removing failed upload to cloud storage remotes
- Make ContentType be preserved for cloud to cloud copies
- Add support to toggle bandwidth limits via SIGUSR2 - thanks
Marco Paganini
- rclone check shows count of hashes that couldn't be checked
- rclone listremotes command
- Support linux/arm64 build - thanks Fredrik Fornwall
- Remove Authorization: lines from --dump-headers output
- Bug Fixes
- Ignore files with control characters in the names
- Fix rclone move command
- Delete src files which already existed in dst
- Fix deletion of src file when dst file older
- Fix rclone check on crypted file systems
- Make failed uploads not count as "Transferred"
- Make sure high level retries show with -q
- Use a vendor directory with godep for repeatable builds
- rclone mount - FUSE
- Implement FUSE mount options
- --no-modtime, --debug-fuse, --read-only, --allow-non-empty,
--allow-root, --allow-other
- --default-permissions, --write-back-cache, --max-read-ahead,
--umask, --uid, --gid
- Add --dir-cache-time to control caching of directory entries
- Implement seek for files opened for read (useful for video
players)
- with -no-seek flag to disable
- Fix crash on 32 bit ARM (alignment of 64 bit counter)
- ...and many more internal fixes and improvements!
- Crypt
- Don't show encrypted password in configurator to stop confusion
- Amazon Drive
- New wait for upload option --acd-upload-wait-per-gb
- upload timeouts scale by file size and can be disabled
- Add 502 Bad Gateway to list of errors we retry
- Fix overwriting a file with a zero length file
- Fix ACD file size warning limit - thanks Felix Bünemann
- Local
- Unix: implement -x/--one-file-system to stay on a single file
system
- thanks Durval Menezes and Luiz Carlos Rumbelsperger Viana
- Windows: ignore the symlink bit on files
- Windows: Ignore directory based junction points
- B2
- Make sure each upload has at least one upload slot - fixes
strange upload stats
- Fix uploads when using crypt
- Fix download of large files (sha1 mismatch)
- Return error when we try to create a bucket which someone else
owns
- Update B2 docs with Data usage, and Crypt section - thanks
Tomasz Mazur
- S3
- Command line and config file support for
- Setting/overriding ACL - thanks Radek Senfeld
- Setting storage class - thanks Asko Tamm
- Drive
- Make exponential backoff work exactly as per Google
specification
- add .epub, .odp and .tsv as export formats.
- Swift
- Don't read metadata for directory marker objects
- v1.33 - 2016-08-24
- New Features
- Implement encryption
- data encrypted in NACL secretbox format
- with optional file name encryption
- New commands
- rclone mount - implements FUSE mounting of remotes
(EXPERIMENTAL)
- works on Linux, FreeBSD and OS X (need testers for the last
2!)
- rclone cat - outputs remote file or files to the terminal
- rclone genautocomplete - command to make a bash completion
script for rclone
- Editing a remote using rclone config now goes through the wizard
- Compile with go 1.7 - this fixes rclone on macOS Sierra and on
386 processors
- Use cobra for sub commands and docs generation
- drive
- Document how to make your own client_id
- s3
- User-configurable Amazon S3 ACL (thanks Radek Šenfeld)
- b2
- Fix stats accounting for upload - no more jumping to 100% done
- On cleanup delete hide marker if it is the current file
- New B2 API endpoint (thanks Per Cederberg)
- Set maximum backoff to 5 Minutes
- onedrive
- Fix URL escaping in file names - eg uploading files with + in
them.
- amazon cloud drive
- Fix token expiry during large uploads
- Work around 408 REQUEST_TIMEOUT and 504 GATEWAY_TIMEOUT errors
- local
- Fix filenames with invalid UTF-8 not being uploaded
- Fix problem with some UTF-8 characters on OS X
- v1.32 - 2016-07-13
- Backblaze B2
- Fix upload of files large files not in root
- v1.31 - 2016-07-13
- New Features
- Reduce memory on sync by about 50%
- Implement --no-traverse flag to stop copy traversing the
destination remote.
- This can be used to reduce memory usage down to the smallest
possible.
- Useful to copy a small number of files into a large
destination folder.
- Implement cleanup command for emptying trash / removing old
versions of files
- Currently B2 only
- Single file handling improved
- Now copied with --files-from
- Automatically sets --no-traverse when copying a single file
- Info on using installing with ansible - thanks Stefan Weichinger
- Implement --no-update-modtime flag to stop rclone fixing the
remote modified times.
- Bug Fixes
- Fix move command - stop it running for overlapping Fses - this
was causing data loss.
- Local
- Fix incomplete hashes - this was causing problems for B2.
- Amazon Drive
- Rename Amazon Cloud Drive to Amazon Drive - no changes to config
file needed.
- Swift
- Add support for non-default project domain - thanks Antonio
Messina.
- S3
- Add instructions on how to use rclone with minio.
- Add ap-northeast-2 (Seoul) and ap-south-1 (Mumbai) regions.
- Skip setting the modified time for objects > 5GB as it isn't
possible.
- Backblaze B2
- Add --b2-versions flag so old versions can be listed and
retreived.
- Treat 403 errors (eg cap exceeded) as fatal.
- Implement cleanup command for deleting old file versions.
- Make error handling compliant with B2 integrations notes.
- Fix handling of token expiry.
- Implement --b2-test-mode to set X-Bz-Test-Mode header.
- Set cutoff for chunked upload to 200MB as per B2 guidelines.
- Make upload multi-threaded.
- Dropbox
- Don't retry 461 errors.
- v1.30 - 2016-06-18
- New Features
- Directory listing code reworked for more features and better
error reporting (thanks to Klaus Post for help). This enables
- Directory include filtering for efficiency
- --max-depth parameter
- Better error reporting
- More to come
- Retry more errors
- Add --ignore-size flag - for uploading images to onedrive
- Log -v output to stdout by default
- Display the transfer stats in more human readable form
- Make 0 size files specifiable with --max-size 0b
- Add b suffix so we can specify bytes in --bwlimit, --min-size
etc
- Use "password:" instead of "password>" prompt - thanks Klaus
Post and Leigh Klotz
- Bug Fixes
- Fix retry doing one too many retries
- Local
- Fix problems with OS X and UTF-8 characters
- Amazon Drive
- Check a file exists before uploading to help with 408 Conflict
errors
- Reauth on 401 errors - this has been causing a lot of problems
- Work around spurious 403 errors
- Restart directory listings on error
- Google Drive
- Check a file exists before uploading to help with duplicates
- Fix retry of multipart uploads
- Backblaze B2
- Implement large file uploading
- S3
- Add AES256 server-side encryption for - thanks Justin R. Wilson
- Google Cloud Storage
- Make sure we don't use conflicting content types on upload
- Add service account support - thanks Michal Witkowski
- Swift
- Add auth version parameter
- Add domain option for openstack (v3 auth) - thanks Fabian Ruff
- v1.29 - 2016-04-18
- New Features
- Implement -I, --ignore-times for unconditional upload
- Improve dedupecommand
- Now removes identical copies without asking
- Now obeys --dry-run
- Implement --dedupe-mode for non interactive running
- --dedupe-mode interactive - interactive the default.
- --dedupe-mode skip - removes identical files then skips
anything left.
- --dedupe-mode first - removes identical files then keeps the
first one.
- --dedupe-mode newest - removes identical files then keeps
the newest one.
- --dedupe-mode oldest - removes identical files then keeps
the oldest one.
- --dedupe-mode rename - removes identical files then renames
the rest to be different.
- Bug fixes
- Make rclone check obey the --size-only flag.
- Use "application/octet-stream" if discovered mime type is
invalid.
- Fix missing "quit" option when there are no remotes.
- Google Drive
- Increase default chunk size to 8 MB - increases upload speed of
big files
- Speed up directory listings and make more reliable
- Add missing retries for Move and DirMove - increases reliability
- Preserve mime type on file update
- Backblaze B2
- Enable mod time syncing
- This means that B2 will now check modification times
- It will upload new files to update the modification times
- (there isn't an API to just set the mod time.)
- If you want the old behaviour use --size-only.
- Update API to new version
- Fix parsing of mod time when not in metadata
- Swift/Hubic
- Don't return an MD5SUM for static large objects
- S3
- Fix uploading files bigger than 50GB
- v1.28 - 2016-03-01
- New Features
- Configuration file encryption - thanks Klaus Post
- Improve rclone config adding more help and making it easier to
understand
- Implement -u/--update so creation times can be used on all
remotes
- Implement --low-level-retries flag
- Optionally disable gzip compression on downloads with
--no-gzip-encoding
- Bug fixes
- Don't make directories if --dry-run set
- Fix and document the move command
- Fix redirecting stderr on unix-like OSes when using --log-file
- Fix delete command to wait until all finished - fixes missing
deletes.
- Backblaze B2
- Use one upload URL per go routine fixes
more than one upload using auth token
- Add pacing, retries and reauthentication - fixes token expiry
problems
- Upload without using a temporary file from local (and remotes
which support SHA1)
- Fix reading metadata for all files when it shouldn't have been
- Drive
- Fix listing drive documents at root
- Disable copy and move for Google docs
- Swift
- Fix uploading of chunked files with non ASCII characters
- Allow setting of storage_url in the config - thanks Xavier Lucas
- S3
- Allow IAM role and credentials from environment variables -
thanks Brian Stengaard
- Allow low privilege users to use S3 (check if directory exists
during Mkdir) - thanks Jakub Gedeon
- Amazon Drive
- Retry on more things to make directory listings more reliable
- v1.27 - 2016-01-31
- New Features
- Easier headless configuration with rclone authorize
- Add support for multiple hash types - we now check SHA1 as well
as MD5 hashes.
- delete command which does obey the filters (unlike purge)
- dedupe command to deduplicate a remote. Useful with Google
Drive.
- Add --ignore-existing flag to skip all files that exist on
destination.
- Add --delete-before, --delete-during, --delete-after flags.
- Add --memprofile flag to debug memory use.
- Warn the user about files with same name but different case
- Make --include rules add their implict exclude * at the end of
the filter list
- Deprecate compiling with go1.3
- Amazon Drive
- Fix download of files > 10 GB
- Fix directory traversal ("Next token is expired") for large
directory listings
- Remove 409 conflict from error codes we will retry - stops very
long pauses
- Backblaze B2
- SHA1 hashes now checked by rclone core
- Drive
- Add --drive-auth-owner-only to only consider files owned by the
user - thanks Björn Harrtell
- Export Google documents
- Dropbox
- Make file exclusion error controllable with -q
- Swift
- Fix upload from unprivileged user.
- S3
- Fix updating of mod times of files with + in.
- Local
- Add local file system option to disable UNC on Windows.
- v1.26 - 2016-01-02
- New Features
- Yandex storage backend - thank you Dmitry Burdeev ("dibu")
- Implement Backblaze B2 storage backend
- Add --min-age and --max-age flags - thank you Adriano Aurélio
Meirelles
- Make ls/lsl/md5sum/size/check obey includes and excludes
- Fixes
- Fix crash in http logging
- Upload releases to github too
- Swift
- Fix sync for chunked files
- OneDrive
- Re-enable server side copy
- Don't mask HTTP error codes with JSON decode error
- S3
- Fix corrupting Content-Type on mod time update (thanks Joseph
Spurrier)
- v1.25 - 2015-11-14
- New features
- Implement Hubic storage system
- Fixes
- Fix deletion of some excluded files without --delete-excluded
- This could have deleted files unexpectedly on sync
- Always check first with --dry-run!
- Swift
- Stop SetModTime losing metadata (eg X-Object-Manifest)
- This could have caused data loss for files > 5GB in size
- Use ContentType from Object to avoid lookups in listings
- OneDrive
- disable server side copy as it seems to be broken at Microsoft
- v1.24 - 2015-11-07
- New features
- Add support for Microsoft OneDrive
- Add --no-check-certificate option to disable server certificate
verification
- Add async readahead buffer for faster transfer of big files
- Fixes
- Allow spaces in remotes and check remote names for validity at
creation time
- Allow '&' and disallow ':' in Windows filenames.
- Swift
- Ignore directory marker objects where appropriate - allows
working with Hubic
- Don't delete the container if fs wasn't at root
- S3
- Don't delete the bucket if fs wasn't at root
- Google Cloud Storage
- Don't delete the bucket if fs wasn't at root
- v1.23 - 2015-10-03
- New features
- Implement rclone size for measuring remotes
- Fixes
- Fix headless config for drive and gcs
- Tell the user they should try again if the webserver method
failed
- Improve output of --dump-headers
- S3
- Allow anonymous access to public buckets
- Swift
- Stop chunked operations logging "Failed to read info: Object Not
Found"
- Use Content-Length on uploads for extra reliability
- v1.22 - 2015-09-28
- Implement rsync like include and exclude flags
- swift
- Support files > 5GB - thanks Sergey Tolmachev
- v1.21 - 2015-09-22
- New features
- Display individual transfer progress
- Make lsl output times in localtime
- Fixes
- Fix allowing user to override credentials again in Drive, GCS
and ACD
- Amazon Drive
- Implement compliant pacing scheme
- Google Drive
- Make directory reads concurrent for increased speed.
- v1.20 - 2015-09-15
- New features
- Amazon Drive support
- Oauth support redone - fix many bugs and improve usability
- Use "golang.org/x/oauth2" as oauth libary of choice
- Improve oauth usability for smoother initial signup
- drive, googlecloudstorage: optionally use auto config for
the oauth token
- Implement --dump-headers and --dump-bodies debug flags
- Show multiple matched commands if abbreviation too short
- Implement server side move where possible
- local
- Always use UNC paths internally on Windows - fixes a lot of bugs
- dropbox
- force use of our custom transport which makes timeouts work
- Thanks to Klaus Post for lots of help with this release
- v1.19 - 2015-08-28
- New features
- Server side copies for s3/swift/drive/dropbox/gcs
- Move command - uses server side copies if it can
- Implement --retries flag - tries 3 times by default
- Build for plan9/amd64 and solaris/amd64 too
- Fixes
- Make a current version download with a fixed URL for scripting
- Ignore rmdir in limited fs rather than throwing error
- dropbox
- Increase chunk size to improve upload speeds massively
- Issue an error message when trying to upload bad file name
- v1.18 - 2015-08-17
- drive
- Add --drive-use-trash flag so rclone trashes instead of deletes
- Add "Forbidden to download" message for files with no
downloadURL
- dropbox
- Remove datastore
- This was deprecated and it caused a lot of problems
- Modification times and MD5SUMs no longer stored
- Fix uploading files > 2GB
- s3
- use official AWS SDK from github.com/aws/aws-sdk-go
- NB will most likely require you to delete and recreate remote
- enable multipart upload which enables files > 5GB
- tested with Ceph / RadosGW / S3 emulation
- many thanks to Sam Liston and Brian Haymore at the Utah Center
for High Performance Computing for a Ceph test account
- misc
- Show errors when reading the config file
- Do not print stats in quiet mode - thanks Leonid Shalupov
- Add FAQ
- Fix created directories not obeying umask
- Linux installation instructions - thanks Shimon Doodkin
- v1.17 - 2015-06-14
- dropbox: fix case insensitivity issues - thanks Leonid Shalupov
- v1.16 - 2015-06-09
- Fix uploading big files which was causing timeouts or panics
- Don't check md5sum after download with --size-only
- v1.15 - 2015-06-06
- Add --checksum flag to only discard transfers by MD5SUM - thanks
Alex Couper
- Implement --size-only flag to sync on size not checksum &
modtime
- Expand docs and remove duplicated information
- Document rclone's limitations with directories
- dropbox: update docs about case insensitivity
- v1.14 - 2015-05-21
- local: fix encoding of non utf-8 file names - fixes a duplicate
file problem
- drive: docs about rate limiting
- google cloud storage: Fix compile after API change in
"google.golang.org/api/storage/v1"
- v1.13 - 2015-05-10
- Revise documentation (especially sync)
- Implement --timeout and --conntimeout
- s3: ignore etags from multipart uploads which aren't md5sums
- v1.12 - 2015-03-15
- drive: Use chunked upload for files above a certain size
- drive: add --drive-chunk-size and --drive-upload-cutoff
parameters
- drive: switch to insert from update when a failed copy deletes
the upload
- core: Log duplicate files if they are detected
- v1.11 - 2015-03-04
- swift: add region parameter
- drive: fix crash on failed to update remote mtime
- In remote paths, change native directory separators to /
- Add synchronization to ls/lsl/lsd output to stop corruptions
- Ensure all stats/log messages to go stderr
- Add --log-file flag to log everything (including panics) to file
- Make it possible to disable stats printing with --stats=0
- Implement --bwlimit to limit data transfer bandwidth
- v1.10 - 2015-02-12
- s3: list an unlimited number of items
- Fix getting stuck in the configurator
- v1.09 - 2015-02-07
- windows: Stop drive letters (eg C:) getting mixed up with
remotes (eg drive:)
- local: Fix directory separators on Windows
- drive: fix rate limit exceeded errors
- v1.08 - 2015-02-04
- drive: fix subdirectory listing to not list entire drive
- drive: Fix SetModTime
- dropbox: adapt code to recent library changes
- v1.07 - 2014-12-23
- google cloud storage: fix memory leak
- v1.06 - 2014-12-12
- Fix "Couldn't find home directory" on OSX
- swift: Add tenant parameter
- Use new location of Google API packages
- v1.05 - 2014-08-09
- Improved tests and consequently lots of minor fixes
- core: Fix race detected by go race detector
- core: Fixes after running errcheck
- drive: reset root directory on Rmdir and Purge
- fs: Document that Purger returns error on empty directory, test
and fix
- google cloud storage: fix ListDir on subdirectory
- google cloud storage: re-read metadata in SetModTime
- s3: make reading metadata more reliable to work around eventual
consistency problems
- s3: strip trailing / from ListDir()
- swift: return directories without / in ListDir
- v1.04 - 2014-07-21
- google cloud storage: Fix crash on Update
- v1.03 - 2014-07-20
- swift, s3, dropbox: fix updated files being marked as corrupted
- Make compile with go 1.1 again
- v1.02 - 2014-07-19
- Implement Dropbox remote
- Implement Google Cloud Storage remote
- Verify Md5sums and Sizes after copies
- Remove times from "ls" command - lists sizes only
- Add add "lsl" - lists times and sizes
- Add "md5sum" command
- v1.01 - 2014-07-04
- drive: fix transfer of big files using up lots of memory
- v1.00 - 2014-07-03
- drive: fix whole second dates
- v0.99 - 2014-06-26
- Fix --dry-run not working
- Make compatible with go 1.1
- v0.98 - 2014-05-30
- s3: Treat missing Content-Length as 0 for some ceph
installations
- rclonetest: add file with a space in
- v0.97 - 2014-05-05
- Implement copying of single files
- s3 & swift: support paths inside containers/buckets
- v0.96 - 2014-04-24
- drive: Fix multiple files of same name being created
- drive: Use o.Update and fs.Put to optimise transfers
- Add version number, -V and --version
- v0.95 - 2014-03-28
- rclone.org: website, docs and graphics
- drive: fix path parsing
- v0.94 - 2014-03-27
- Change remote format one last time
- GNU style flags
- v0.93 - 2014-03-16
- drive: store token in config file
- cross compile other versions
- set strict permissions on config file
- v0.92 - 2014-03-15
- Config fixes and --config option
- v0.91 - 2014-03-15
- Make config file
- v0.90 - 2013-06-27
- Project named rclone
- v0.00 - 2012-11-18
- Project started
Bugs and Limitations
Empty directories are left behind / not created
With remotes that have a concept of directory, eg Local and Drive, empty
directories may be left behind, or not created when one was expected.
This is because rclone doesn't have a concept of a directory - it only
works on objects. Most of the object storage systems can't actually
store a directory so there is nowhere for rclone to store anything about
directories.
You can work round this to some extent with thepurge command which will
delete everything under the path, INLUDING empty directories.
This may be fixed at some point in Issue #100
Directory timestamps aren't preserved
For the same reason as the above, rclone doesn't have a concept of a
directory - it only works on objects, therefore it can't preserve the
timestamps of directories.
Frequently Asked Questions
Do all cloud storage systems support all rclone commands
Yes they do. All the rclone commands (eg sync, copy etc) will work on
all the remote storage systems.
Can I copy the config from one machine to another
Sure! Rclone stores all of its config in a single file. If you want to
find this file, the simplest way is to run rclone -h and look at the
help for the --config flag which will tell you where it is.
See the remote setup docs for more info.
How do I configure rclone on a remote / headless box with no browser?
This has now been documented in its own remote setup page.
Can rclone sync directly from drive to s3
Rclone can sync between two remote cloud storage systems just fine.
Note that it effectively downloads the file and uploads it again, so the
node running rclone would need to have lots of bandwidth.
The syncs would be incremental (on a file by file basis).
Eg
rclone sync drive:Folder s3:bucket
Using rclone from multiple locations at the same time
You can use rclone from multiple places at the same time if you choose
different subdirectory for the output, eg
Server A> rclone sync /tmp/whatever remote:ServerA
Server B> rclone sync /tmp/whatever remote:ServerB
If you sync to the same directory then you should use rclone copy
otherwise the two rclones may delete each others files, eg
Server A> rclone copy /tmp/whatever remote:Backup
Server B> rclone copy /tmp/whatever remote:Backup
The file names you upload from Server A and Server B should be different
in this case, otherwise some file systems (eg Drive) may make
duplicates.
Why doesn't rclone support partial transfers / binary diffs like rsync?
Rclone stores each file you transfer as a native object on the remote
cloud storage system. This means that you can see the files you upload
as expected using alternative access methods (eg using the Google Drive
web interface). There is a 1:1 mapping between files on your hard disk
and objects created in the cloud storage system.
Cloud storage systems (at least none I've come across yet) don't support
partially uploading an object. You can't take an existing object, and
change some bytes in the middle of it.
It would be possible to make a sync system which stored binary diffs
instead of whole objects like rclone does, but that would break the 1:1
mapping of files on your hard disk to objects in the remote cloud
storage system.
All the cloud storage systems support partial downloads of content, so
it would be possible to make partial downloads work. However to make
this work efficiently this would require storing a significant amount of
metadata, which breaks the desired 1:1 mapping of files to objects.
Can rclone do bi-directional sync?
No, not at present. rclone only does uni-directional sync from A -> B.
It may do in the future though since it has all the primitives - it just
requires writing the algorithm to do it.
Can I use rclone with an HTTP proxy?
Yes. rclone will use the environment variables HTTP_PROXY, HTTPS_PROXY
and NO_PROXY, similar to cURL and other programs.
HTTPS_PROXY takes precedence over HTTP_PROXY for https requests.
The environment values may be either a complete URL or a "host[:port]",
in which case the "http" scheme is assumed.
The NO_PROXY allows you to disable the proxy for specific hosts. Hosts
must be comma separated, and can contain domains or parts. For instance
"foo.com" also matches "bar.foo.com".
Rclone gives x509: failed to load system roots and no roots provided error
This means that rclone can't file the SSL root certificates. Likely you
are running rclone on a NAS with a cut-down Linux OS, or possibly on
Solaris.
Rclone (via the Go runtime) tries to load the root certificates from
these places on Linux.
"/etc/ssl/certs/ca-certificates.crt", // Debian/Ubuntu/Gentoo etc.
"/etc/pki/tls/certs/ca-bundle.crt", // Fedora/RHEL
"/etc/ssl/ca-bundle.pem", // OpenSUSE
"/etc/pki/tls/cacert.pem", // OpenELEC
So doing something like this should fix the problem. It also sets the
time which is important for SSL to work properly.
mkdir -p /etc/ssl/certs/
curl -o /etc/ssl/certs/ca-certificates.crt https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt
ntpclient -s -h pool.ntp.org
The two environment variables SSL_CERT_FILE and SSL_CERT_DIR, mentioned
in the x509 pacakge, provide an additional way to provide the SSL root
certificates.
Note that you may need to add the --insecure option to the curl command
line if it doesn't work without.
curl --insecure -o /etc/ssl/certs/ca-certificates.crt https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt
Rclone gives Failed to load config file: function not implemented error
Likely this means that you are running rclone on Linux version not
supported by the go runtime, ie earlier than version 2.6.23.
See the system requirements section in the go install docs for full
details.
All my uploaded docx/xlsx/pptx files appear as archive/zip
This is caused by uploading these files from a Windows computer which
hasn't got the Microsoft Office suite installed. The easiest way to fix
is to install the Word viewer and the Microsoft Office Compatibility
Pack for Word, Excel, and PowerPoint 2007 and later versions' file
formats
tcp lookup some.domain.com no such host
This happens when rclone cannot resolve a domain. Please check that your
DNS setup is generally working, e.g.
# both should print a long list of possible IP addresses
dig www.googleapis.com # resolve using your default DNS
dig www.googleapis.com @8.8.8.8 # resolve with Google's DNS server
If you are using systemd-resolved (default on Arch Linux), ensure it is
at version 233 or higher. Previous releases contain a bug which causes
not all domains to be resolved properly.
Additionally with the GODEBUG=netdns= environment variable the Go
resolver decision can be influenced. This also allows to resolve certain
issues with DNS resolution. See the name resolution section in the go
docs.
License
This is free software under the terms of MIT the license (check the
COPYING file included with the source code).
Copyright (C) 2012 by Nick Craig-Wood https://www.craig-wood.com/nick/
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
Authors
- Nick Craig-Wood nick@craig-wood.com
Contributors
- Alex Couper amcouper@gmail.com
- Leonid Shalupov leonid@shalupov.com shalupov@diverse.org.ru
- Shimon Doodkin helpmepro1@gmail.com
- Colin Nicholson colin@colinn.com
- Klaus Post klauspost@gmail.com
- Sergey Tolmachev tolsi.ru@gmail.com
- Adriano Aurélio Meirelles adriano@atinge.com
- C. Bess cbess@users.noreply.github.com
- Dmitry Burdeev dibu28@gmail.com
- Joseph Spurrier github@josephspurrier.com
- Björn Harrtell bjorn@wololo.org
- Xavier Lucas xavier.lucas@corp.ovh.com
- Werner Beroux werner@beroux.com
- Brian Stengaard brian@stengaard.eu
- Jakub Gedeon jgedeon@sofi.com
- Jim Tittsler jwt@onjapan.net
- Michal Witkowski michal@improbable.io
- Fabian Ruff fabian.ruff@sap.com
- Leigh Klotz klotz@quixey.com
- Romain Lapray lapray.romain@gmail.com
- Justin R. Wilson jrw972@gmail.com
- Antonio Messina antonio.s.messina@gmail.com
- Stefan G. Weichinger office@oops.co.at
- Per Cederberg cederberg@gmail.com
- Radek Šenfeld rush@logic.cz
- Fredrik Fornwall fredrik@fornwall.net
- Asko Tamm asko@deekit.net
- xor-zz xor@gstocco.com
- Tomasz Mazur tmazur90@gmail.com
- Marco Paganini paganini@paganini.net
- Felix Bünemann buenemann@louis.info
- Durval Menezes jmrclone@durval.com
- Luiz Carlos Rumbelsperger Viana maxd13_luiz_carlos@hotmail.com
- Stefan Breunig stefan-github@yrden.de
- Alishan Ladhani ali-l@users.noreply.github.com
- 0xJAKE 0xJAKE@users.noreply.github.com
- Thibault Molleman thibaultmol@users.noreply.github.com
- Scott McGillivray scott.mcgillivray@gmail.com
- Bjørn Erik Pedersen bjorn.erik.pedersen@gmail.com
- Lukas Loesche lukas@mesosphere.io
- emyarod allllaboutyou@gmail.com
- T.C. Ferguson tcf909@gmail.com
- Brandur brandur@mutelight.org
- Dario Giovannetti dev@dariogiovannetti.net
- Károly Oláh okaresz@aol.com
- Jon Yergatian jon@macfanatic.ca
- Jack Schmidt github@mowsey.org
- Dedsec1 Dedsec1@users.noreply.github.com
- Hisham Zarka hzarka@gmail.com
- Jérôme Vizcaino jerome.vizcaino@gmail.com
- Mike Tesch mjt6129@rit.edu
- Marvin Watson marvwatson@users.noreply.github.com
- Danny Tsai danny8376@gmail.com
- Yoni Jah yonjah+git@gmail.com yonjah+github@gmail.com
- Stephen Harris github@spuddy.org
- Ihor Dvoretskyi ihor.dvoretskyi@gmail.com
- Jon Craton jncraton@gmail.com
- Hraban Luyat hraban@0brg.net
- Michael Ledin mledin89@gmail.com
- Martin Kristensen me@azgul.com
- Too Much IO toomuchio@users.noreply.github.com
- Anisse Astier anisse@astier.eu
- Zahiar Ahmed zahiar@live.com
- Igor Kharin igorkharin@gmail.com
- Bill Zissimopoulos billziss@navimatics.com
- Bob Potter bobby.potter@gmail.com
- Steven Lu tacticalazn@gmail.com
- Sjur Fredriksen sjurtf@ifi.uio.no
- Ruwbin hubus12345@gmail.com
- Fabian Möller fabianm88@gmail.com f.moeller@nynex.de
- Edward Q. Bridges github@eqbridges.com
- Vasiliy Tolstov v.tolstov@selfip.ru
- Harshavardhana harsha@minio.io
- sainaen sainaen@gmail.com
- gdm85 gdm85@users.noreply.github.com
- Yaroslav Halchenko debian@onerussian.com
- John Papandriopoulos jpap@users.noreply.github.com
- Zhiming Wang zmwangx@gmail.com
- Andy Pilate cubox@cubox.me
- Oliver Heyme olihey@googlemail.com olihey@users.noreply.github.com
de8olihe@lego.com
- wuyu wuyu@yunify.com
- Andrei Dragomir adragomi@adobe.com
- Christian Brüggemann mail@cbruegg.com
- Alex McGrath Kraak amkdude@gmail.com
- bpicode bjoern.pirnay@googlemail.com
- Daniel Jagszent daniel@jagszent.de
- Josiah White thegenius2009@gmail.com
- Ishuah Kariuki kariuki@ishuah.com ishuah91@gmail.com
- Jan Varho jan@varho.org
- Girish Ramakrishnan girish@cloudron.io
- LingMan LingMan@users.noreply.github.com
- Jacob McNamee jacobmcnamee@gmail.com
- jersou jertux@gmail.com
- thierry thierry@substantiel.fr
- Simon Leinen simon.leinen@gmail.com ubuntu@s3-test.novalocal
- Dan Dascalescu ddascalescu+github@gmail.com
- Jason Rose jason@jro.io
- Andrew Starr-Bochicchio a.starr.b@gmail.com
- John Leach john@johnleach.co.uk
- Corban Raun craun@instructure.com
- Pierre Carlson mpcarl@us.ibm.com
- Ernest Borowski er.borowski@gmail.com
- Remus Bunduc remus.bunduc@gmail.com
- Iakov Davydov iakov.davydov@unil.ch dav05.gith@myths.ru
- Jakub Tasiemski tasiemski@gmail.com
- David Minor dminor@saymedia.com
- Tim Cooijmans cooijmans.tim@gmail.com
- Laurence liuxy6@gmail.com
- Giovanni Pizzi gio.piz@gmail.com
- Filip Bartodziej filipbartodziej@gmail.com
- Jon Fautley jon@dead.li
- lewapm 32110057+lewapm@users.noreply.github.com
- Yassine Imounachen yassine256@gmail.com
- Chris Redekop chris-redekop@users.noreply.github.com
chris.redekop@gmail.com
- Jon Fautley jon@adenoid.appstal.co.uk
- Will Gunn WillGunn@users.noreply.github.com
- Lucas Bremgartner lucas@bremis.ch
- Jody Frankowski jody.frankowski@gmail.com
- Andreas Roussos arouss1980@gmail.com
- nbuchanan nbuchanan@utah.gov
- Durval Menezes rclone@durval.com
- Victor vb-github@viblo.se
- Mateusz pabian.mateusz@gmail.com
- Daniel Loader spicypixel@gmail.com
- David0rk davidork@gmail.com
- Alexander Neumann alexander@bumpern.de
- Giri Badanahatti gbadanahatti@us.ibm.com@Giris-MacBook-Pro.local
- Leo R. Lundgren leo@finalresort.org
- wolfv wolfv6@users.noreply.github.com
- Dave Pedu dave@davepedu.com
- Stefan Lindblom lindblom@spotify.com
- seuffert oliver@seuffert.biz
- gbadanahatti 37121690+gbadanahatti@users.noreply.github.com
- Keith Goldfarb barkofdelight@gmail.com
- Steve Kriss steve@heptio.com
- Chih-Hsuan Yen yan12125@gmail.com
- Alexander Neumann fd0@users.noreply.github.com
- Matt Holt mholt@users.noreply.github.com
- Eri Bastos bastos.eri@gmail.com
- Michael P. Dubner pywebmail@list.ru
- Antoine GIRARD sapk@users.noreply.github.com
- Mateusz Piotrowski mpp302@gmail.com
- Animosity022 animosity22@users.noreply.github.com
- Peter Baumgartner pete@lincolnloop.com
- Craig Rachel craig@craigrachel.com
- Michael G. Noll miguno@users.noreply.github.com
- hensur me@hensur.de
- Oliver Heyme de8olihe@lego.com
- Richard Yang richard@yenforyang.com
- Piotr Oleszczyk piotr.oleszczyk@gmail.com
- Rodrigo rodarima@gmail.com
- NoLooseEnds NoLooseEnds@users.noreply.github.com
- Jakub Karlicek jakub@karlicek.me
- John Clayton john@codemonkeylabs.com
- Kasper Byrdal Nielsen byrdal76@gmail.com
- Benjamin Joseph Dag bjdag1234@users.noreply.github.com
- themylogin themylogin@gmail.com
CONTACT THE RCLONE PROJECT
Forum
Forum for general discussions and questions:
- https://forum.rclone.org
Gitub project
The project website is at:
- https://github.com/ncw/rclone
There you can file bug reports, ask for help or contribute pull
requests.
Google+
Rclone has a Google+ page which announcements are posted to
- Google+ page for general comments
Twitter
You can also follow me on twitter for rclone announcements
- [@njcw](https://twitter.com/njcw)
Email
Or if all else fails or you want to ask something private or
confidential email Nick Craig-Wood
Reference in New Issue View Git Blame Copy Permalink