rclone/cmd/bisync/testdata/test_check_access/golden/test.log
nielash b4216648e4 bisync: full support for comparing checksum, size, modtime - fixes #5679 fixes #5683 fixes #5684 fixes #5675
Before this change, bisync could only detect changes based on modtime, and
would refuse to run if either path lacked modtime support. This made bisync
unavailable for many of rclone's backends. Additionally, bisync did not account
for the Fs's precision when comparing modtimes, meaning that they could only be
reliably compared within the same side -- not against the opposite side. Size
and checksum (even when available) were ignored completely for deltas.

After this change, bisync now fully supports comparing based on any combination
of size, modtime, and checksum, lifting the prior restriction on backends
without modtime support. The comparison logic considers the backend's
precision, hash types, and other features as appropriate.

The comparison features optionally use a new --compare flag (which takes any
combination of size,modtime,checksum) and even supports some combinations not
otherwise supported in `sync` (like comparing all three at the same time.) By
default (without the --compare flag), bisync inherits the same comparison
options as `sync` (that is: size and modtime by default, unless modified with
flags such as --checksum or --size-only.) If the --compare flag is set, it will
override these defaults.

If --compare includes checksum and both remotes support checksums but have no
hash types in common with each other, checksums will be considered only for
comparisons within the same side (to determine what has changed since the prior
sync), but not for comparisons against the opposite side. If one side supports
checksums and the other does not, checksums will only be considered on the side
that supports them. When comparing with checksum and/or size without modtime,
bisync cannot determine whether a file is newer or older -- only whether it is
changed or unchanged. (If it is changed on both sides, bisync still does the
standard equality-check to avoid declaring a sync conflict unless it absolutely
has to.)

Also included are some new flags to customize the checksum comparison behavior
on backends where hashes are slow or unavailable. --no-slow-hash and
--slow-hash-sync-only allow selectively ignoring checksums on backends such as
local where they are slow. --download-hash allows computing them by downloading
when (and only when) they're otherwise not available. Of course, this option
probably won't be practical with large files, but may be a good option for
syncing small-but-important files with maximum accuracy (for example, a source
code repo on a crypt remote.) An additional advantage over methods like
cryptcheck is that the original file is not required for comparison (for
example, --download-hash can be used to bisync two different crypt remotes with
different passwords.)

Additionally, all of the above are now considered during the final --check-sync
for much-improved accuracy (before this change, it only compared filenames!)

Many other details are explained in the included docs.
2024-01-20 16:08:06 -05:00

8.1 KiB

(01) : test check-access
 
 
(02) : test initial bisync
(03) : bisync resync
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Copying unique Path2 files to Path1
INFO : - Path2 Resync is copying UNIQUE files to - Path1
INFO : - Path1 Resync is copying UNIQUE OR DIFFERING files to - Path2
INFO : Resync updating listings
INFO : Bisync successful
 
(04) : test 1. see that check-access passes with the initial setup
(05) : bisync check-access
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : Path2 checking for diffs
INFO : Checking access health
INFO : Found 2 matching "RCLONE_TEST" files on both paths
INFO : No changes found
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful
 
(06) : test 2. delete the path2 subdir RCLONE_TEST and run sync. should fail critical.
(07) : delete-file {path2/}subdir/RCLONE_TEST
(08) : bisync check-access
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : Path2 checking for diffs
INFO : - Path2 File was deleted - subdir/RCLONE_TEST
INFO : Path2: 1 changes: 0 new, 0 modified, 1 deleted
INFO : Checking access health
ERROR : Access test failed: Path1 count 2, Path2 count 1 - RCLONE_TEST
ERROR : - Access test failed: Path1 file not found in Path2 - subdir/RCLONE_TEST
ERROR : Bisync critical error: check file check failed
ERROR : Bisync aborted. Must run --resync to recover.
Bisync error: bisync aborted
(09) : copy-listings path2-missing
 
(10) : test 3. put the path2 subdir RCLONE_TEST back, resync.
(11) : copy-file {path1/}subdir/RCLONE_TEST {path2/}
(12) : bisync resync
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Copying unique Path2 files to Path1
INFO : - Path2 Resync is copying UNIQUE files to - Path1
INFO : - Path1 Resync is copying UNIQUE OR DIFFERING files to - Path2
INFO : Resync updating listings
INFO : Bisync successful
 
(13) : test 4. run sync with check-access. should pass.
(14) : bisync check-access
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : Path2 checking for diffs
INFO : Checking access health
INFO : Found 2 matching "RCLONE_TEST" files on both paths
INFO : No changes found
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful
 
(15) : test 5. delete path1 top level RCLONE_TEST, run sync. should fail critical.
(16) : delete-file {path1/}RCLONE_TEST
(17) : bisync check-access
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : - Path1 File was deleted - RCLONE_TEST
INFO : Path1: 1 changes: 0 new, 0 modified, 1 deleted
INFO : Path2 checking for diffs
INFO : Checking access health
ERROR : Access test failed: Path1 count 1, Path2 count 2 - RCLONE_TEST
ERROR : - Access test failed: Path2 file not found in Path1 - RCLONE_TEST
ERROR : Bisync critical error: check file check failed
ERROR : Bisync aborted. Must run --resync to recover.
Bisync error: bisync aborted
(18) : copy-listings path1-missing
 
(19) : test 6. run again. should fail critical due to missing listings.
(20) : bisync check-access
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
ERROR : Bisync critical error: cannot find prior Path1 or Path2 listings, likely due to critical error on prior run
Tip: here are the filenames we were looking for. Do they exist?
Path1: {workdir/}{session}.path1.lst
Path2: {workdir/}{session}.path2.lst
Try running this command to inspect the work dir:
rclone lsl "{workdir}"
ERROR : Bisync aborted. Must run --resync to recover.
Bisync error: bisync aborted
(21) : move-listings missing-listings
 
(22) : test 7. run resync, which will copy the path2 top level back to path1.
(23) : bisync resync
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Copying unique Path2 files to Path1
INFO : - Path2 Resync is copying UNIQUE files to - Path1
INFO : - Path1 Resync is copying UNIQUE OR DIFFERING files to - Path2
INFO : Resync updating listings
INFO : Bisync successful
 
(24) : test 8. run sync with --check-access. should pass.
(25) : bisync check-access
INFO : Setting --ignore-listing-checksum as neither --checksum nor --compare checksum are set.
INFO : Bisyncing with Comparison Settings:
{
"Modtime": true,
"Size": true,
"Checksum": false,
"NoSlowHash": false,
"SlowHashSyncOnly": false,
"DownloadHash": false
}
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : Path2 checking for diffs
INFO : Checking access health
INFO : Found 2 matching "RCLONE_TEST" files on both paths
INFO : No changes found
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful