mirror of
https://github.com/rclone/rclone.git
synced 2024-11-25 18:04:55 +01:00
fd8faeb0e6
Before this change, the VFS layer did not properly handle unicode normalization, which caused problems particularly for users of macOS. While attempts were made to handle it with various `-o modules=iconv` combinations, this was an imperfect solution, as no one combination allowed both NFC and NFD content to simultaneously be both visible and editable via Finder. After this change, the VFS supports `--no-unicode-normalization` (default `false`) via the existing `--vfs-case-insensitive` logic, which is extended to apply to both case insensitivity and unicode normalization form. This change also adds an additional flag, `--vfs-block-norm-dupes`, to address a probably rare but potentially possible scenario where a directory contains multiple duplicate filenames after applying case and unicode normalization settings. In such a scenario, this flag (disabled by default) hides the duplicates. This comes with a performance tradeoff, as rclone will have to scan the entire directory for duplicates when listing a directory. For this reason, it is recommended to leave this disabled if not needed. However, macOS users may wish to consider using it, as otherwise, if a remote directory contains both NFC and NFD versions of the same filename, an odd situation will occur: both versions of the file will be visible in the mount, and both will appear to be editable, however, editing either version will actually result in only the NFD version getting edited under the hood. `--vfs-block-norm-dupes` prevents this confusion by detecting this scenario, hiding the duplicates, and logging an error, similar to how this is handled in `rclone sync`.
48 lines
4.0 KiB
Go
48 lines
4.0 KiB
Go
// Package vfsflags implements command line flags to set up a vfs
|
|
package vfsflags
|
|
|
|
import (
|
|
"github.com/rclone/rclone/fs/config/flags"
|
|
"github.com/rclone/rclone/fs/rc"
|
|
"github.com/rclone/rclone/vfs/vfscommon"
|
|
"github.com/spf13/pflag"
|
|
)
|
|
|
|
// Options set by command line flags
|
|
var (
|
|
Opt = vfscommon.DefaultOpt
|
|
DirPerms = &FileMode{Mode: &Opt.DirPerms}
|
|
FilePerms = &FileMode{Mode: &Opt.FilePerms}
|
|
)
|
|
|
|
// AddFlags adds the non filing system specific flags to the command
|
|
func AddFlags(flagSet *pflag.FlagSet) {
|
|
rc.AddOption("vfs", &Opt)
|
|
flags.BoolVarP(flagSet, &Opt.NoModTime, "no-modtime", "", Opt.NoModTime, "Don't read/write the modification time (can speed things up)", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.NoChecksum, "no-checksum", "", Opt.NoChecksum, "Don't compare checksums on up/download", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.NoSeek, "no-seek", "", Opt.NoSeek, "Don't allow seeking in files", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.DirCacheTime, "dir-cache-time", "", Opt.DirCacheTime, "Time to cache directory entries for", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.Refresh, "vfs-refresh", "", Opt.Refresh, "Refreshes the directory cache recursively in the background on start", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.PollInterval, "poll-interval", "", Opt.PollInterval, "Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable)", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.ReadOnly, "read-only", "", Opt.ReadOnly, "Only allow read-only access", "VFS")
|
|
flags.FVarP(flagSet, &Opt.CacheMode, "vfs-cache-mode", "", "Cache mode off|minimal|writes|full", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.CachePollInterval, "vfs-cache-poll-interval", "", Opt.CachePollInterval, "Interval to poll the cache for stale objects", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.CacheMaxAge, "vfs-cache-max-age", "", Opt.CacheMaxAge, "Max time since last access of objects in the cache", "VFS")
|
|
flags.FVarP(flagSet, &Opt.CacheMaxSize, "vfs-cache-max-size", "", "Max total size of objects in the cache", "VFS")
|
|
flags.FVarP(flagSet, &Opt.CacheMinFreeSpace, "vfs-cache-min-free-space", "", "Target minimum free space on the disk containing the cache", "VFS")
|
|
flags.FVarP(flagSet, &Opt.ChunkSize, "vfs-read-chunk-size", "", "Read the source objects in chunks", "VFS")
|
|
flags.FVarP(flagSet, &Opt.ChunkSizeLimit, "vfs-read-chunk-size-limit", "", "If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited)", "VFS")
|
|
flags.FVarP(flagSet, DirPerms, "dir-perms", "", "Directory permissions", "VFS")
|
|
flags.FVarP(flagSet, FilePerms, "file-perms", "", "File permissions", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.CaseInsensitive, "vfs-case-insensitive", "", Opt.CaseInsensitive, "If a file name not found, find a case insensitive match", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.BlockNormDupes, "vfs-block-norm-dupes", "", Opt.BlockNormDupes, "If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.WriteWait, "vfs-write-wait", "", Opt.WriteWait, "Time to wait for in-sequence write before giving error", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.ReadWait, "vfs-read-wait", "", Opt.ReadWait, "Time to wait for in-sequence read before seeking", "VFS")
|
|
flags.DurationVarP(flagSet, &Opt.WriteBack, "vfs-write-back", "", Opt.WriteBack, "Time to writeback files after last use when using cache", "VFS")
|
|
flags.FVarP(flagSet, &Opt.ReadAhead, "vfs-read-ahead", "", "Extra read ahead over --buffer-size when using cache-mode full", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.UsedIsSize, "vfs-used-is-size", "", Opt.UsedIsSize, "Use the `rclone size` algorithm for Used size", "VFS")
|
|
flags.BoolVarP(flagSet, &Opt.FastFingerprint, "vfs-fast-fingerprint", "", Opt.FastFingerprint, "Use fast (less accurate) fingerprints for change detection", "VFS")
|
|
flags.FVarP(flagSet, &Opt.DiskSpaceTotalSize, "vfs-disk-space-total-size", "", "Specify the total space of disk", "VFS")
|
|
platformFlags(flagSet)
|
|
}
|