mirror of
https://github.com/rclone/rclone.git
synced 2024-11-29 20:04:52 +01:00
68f0998699
Before this change, when a file was new/changed on both paths (relative to the prior sync), and the versions on each side were not identical, bisync would keep both versions, renaming them with ..path1 and ..path2 suffixes, respectively. Many users have requested more control over how bisync handles such conflicts -- including an option to automatically select one version as the "winner" and rename or delete the "loser". This change introduces support for such options. --conflict-resolve CHOICE In bisync, a "conflict" is a file that is *new* or *changed* on *both sides* (relative to the prior run) AND is *not currently identical* on both sides. `--conflict-resolve` controls how bisync handles such a scenario. The currently supported options are: - `none` - (the default) - do not attempt to pick a winner, keep and rename both files according to `--conflict-loser` and `--conflict-suffix` settings. For example, with the default settings, `file.txt` on Path1 is renamed `file.txt.conflict1` and `file.txt` on Path2 is renamed `file.txt.conflict2`. Both are copied to the opposite path during the run, so both sides end up with a copy of both files. (As `none` is the default, it is not necessary to specify `--conflict-resolve none` -- you can just omit the flag.) - `newer` - the newer file (by `modtime`) is considered the winner and is copied without renaming. The older file (the "loser") is handled according to `--conflict-loser` and `--conflict-suffix` settings (either renamed or deleted.) For example, if `file.txt` on Path1 is newer than `file.txt` on Path2, the result on both sides (with other default settings) will be `file.txt` (winner from Path1) and `file.txt.conflict1` (loser from Path2). - `older` - same as `newer`, except the older file is considered the winner, and the newer file is considered the loser. - `larger` - the larger file (by `size`) is considered the winner (regardless of `modtime`, if any). - `smaller` - the smaller file (by `size`) is considered the winner (regardless of `modtime`, if any). - `path1` - the version from Path1 is unconditionally considered the winner (regardless of `modtime` and `size`, if any). This can be useful if one side is usually more trusted or up-to-date than the other. - `path2` - same as `path1`, except the path2 version is considered the winner. For all of the above options, note the following: - If either of the underlying remotes lacks support for the chosen method, it will be ignored and fall back to `none`. (For example, if `--conflict-resolve newer` is set, but one of the paths uses a remote that doesn't support `modtime`.) - If a winner can't be determined because the chosen method's attribute is missing or equal, it will be ignored and fall back to `none`. (For example, if `--conflict-resolve newer` is set, but the Path1 and Path2 modtimes are identical, even if the sizes may differ.) - If the file's content is currently identical on both sides, it is not considered a "conflict", even if new or changed on both sides since the prior sync. (For example, if you made a change on one side and then synced it to the other side by other means.) Therefore, none of the conflict resolution flags apply in this scenario. - The conflict resolution flags do not apply during a `--resync`, as there is no "prior run" to speak of (but see `--resync-mode` for similar options.) --conflict-loser CHOICE `--conflict-loser` determines what happens to the "loser" of a sync conflict (when `--conflict-resolve` determines a winner) or to both files (when there is no winner.) The currently supported options are: - `num` - (the default) - auto-number the conflicts by automatically appending the next available number to the `--conflict-suffix`, in chronological order. For example, with the default settings, the first conflict for `file.txt` will be renamed `file.txt.conflict1`. If `file.txt.conflict1` already exists, `file.txt.conflict2` will be used instead (etc., up to a maximum of 9223372036854775807 conflicts.) - `pathname` - rename the conflicts according to which side they came from, which was the default behavior prior to `v1.66`. For example, with `--conflict-suffix path`, `file.txt` from Path1 will be renamed `file.txt.path1`, and `file.txt` from Path2 will be renamed `file.txt.path2`. If two non-identical suffixes are provided (ex. `--conflict-suffix cloud,local`), the trailing digit is omitted. Importantly, note that with `pathname`, there is no auto-numbering beyond `2`, so if `file.txt.path2` somehow already exists, it will be overwritten. Using a dynamic date variable in your `--conflict-suffix` (see below) is one possible way to avoid this. Note also that conflicts-of-conflicts are possible, if the original conflict is not manually resolved -- for example, if for some reason you edited `file.txt.path1` on both sides, and those edits were different, the result would be `file.txt.path1.path1` and `file.txt.path1.path2` (in addition to `file.txt.path2`.) - `delete` - keep the winner only and delete the loser, instead of renaming it. If a winner cannot be determined (see `--conflict-resolve` for details on how this could happen), `delete` is ignored and the default `num` is used instead (i.e. both versions are kept and renamed, and neither is deleted.) `delete` is inherently the most destructive option, so use it only with care. For all of the above options, note that if a winner cannot be determined (see `--conflict-resolve` for details on how this could happen), or if `--conflict-resolve` is not in use, *both* files will be renamed. --conflict-suffix STRING[,STRING] `--conflict-suffix` controls the suffix that is appended when bisync renames a `--conflict-loser` (default: `conflict`). `--conflict-suffix` will accept either one string or two comma-separated strings to assign different suffixes to Path1 vs. Path2. This may be helpful later in identifying the source of the conflict. (For example, `--conflict-suffix dropboxconflict,laptopconflict`) With `--conflict-loser num`, a number is always appended to the suffix. With `--conflict-loser pathname`, a number is appended only when one suffix is specified (or when two identical suffixes are specified.) i.e. with `--conflict-loser pathname`, all of the following would produce exactly the same result: ``` --conflict-suffix path --conflict-suffix path,path --conflict-suffix path1,path2 ``` Suffixes may be as short as 1 character. By default, the suffix is appended after any other extensions (ex. `file.jpg.conflict1`), however, this can be changed with the `--suffix-keep-extension` flag (i.e. to instead result in `file.conflict1.jpg`). `--conflict-suffix` supports several *dynamic date variables* when enclosed in curly braces as globs. This can be helpful to track the date and/or time that each conflict was handled by bisync. For example: ``` --conflict-suffix {DateOnly}-conflict // result: myfile.txt.2006-01-02-conflict1 ``` All of the formats described [here](https://pkg.go.dev/time#pkg-constants) and [here](https://pkg.go.dev/time#example-Time.Format) are supported, but take care to ensure that your chosen format does not use any characters that are illegal on your remotes (for example, macOS does not allow colons in filenames, and slashes are also best avoided as they are often interpreted as directory separators.) To address this particular issue, an additional `{MacFriendlyTime}` (or just `{mac}`) option is supported, which results in `2006-01-02 0304PM`. Note that `--conflict-suffix` is entirely separate from rclone's main `--sufix` flag. This is intentional, as users may wish to use both flags simultaneously, if also using `--backup-dir`. Finally, note that the default in bisync prior to `v1.66` was to rename conflicts with `..path1` and `..path2` (with two periods, and `path` instead of `conflict`.) Bisync now defaults to a single dot instead of a double dot, but additional dots can be added by including them in the specified suffix string. For example, for behavior equivalent to the previous default, use: ``` [--conflict-resolve none] --conflict-loser pathname --conflict-suffix .path ```
166 lines
4.2 KiB
Go
166 lines
4.2 KiB
Go
package bilib
|
|
|
|
import (
|
|
"bytes"
|
|
"os"
|
|
"sort"
|
|
"strconv"
|
|
"strings"
|
|
"time"
|
|
)
|
|
|
|
// Names comprises a set of file names
|
|
type Names map[string]interface{}
|
|
|
|
// ToNames converts string slice to a set of names
|
|
func ToNames(list []string) Names {
|
|
ns := Names{}
|
|
for _, f := range list {
|
|
ns.Add(f)
|
|
}
|
|
return ns
|
|
}
|
|
|
|
// Add adds new file name to the set
|
|
func (ns Names) Add(name string) {
|
|
ns[name] = nil
|
|
}
|
|
|
|
// Has checks whether given name is present in the set
|
|
func (ns Names) Has(name string) bool {
|
|
_, ok := ns[name]
|
|
return ok
|
|
}
|
|
|
|
// NotEmpty checks whether set is not empty
|
|
func (ns Names) NotEmpty() bool {
|
|
return len(ns) > 0
|
|
}
|
|
|
|
// ToList converts name set to string slice
|
|
func (ns Names) ToList() []string {
|
|
list := []string{}
|
|
for file := range ns {
|
|
list = append(list, file)
|
|
}
|
|
sort.Strings(list)
|
|
return list
|
|
}
|
|
|
|
// Save saves name set in a text file
|
|
func (ns Names) Save(path string) error {
|
|
return SaveList(ns.ToList(), path)
|
|
}
|
|
|
|
// SaveList saves file name list in a text file
|
|
func SaveList(list []string, path string) error {
|
|
buf := &bytes.Buffer{}
|
|
for _, s := range list {
|
|
_, _ = buf.WriteString(strconv.Quote(s))
|
|
_ = buf.WriteByte('\n')
|
|
}
|
|
return os.WriteFile(path, buf.Bytes(), PermSecure)
|
|
}
|
|
|
|
// AliasMap comprises a pair of names that are not equal but treated as equal for comparison purposes
|
|
// For example, when normalizing unicode and casing
|
|
// This helps reduce repeated normalization functions, which really slow things down
|
|
type AliasMap map[string]string
|
|
|
|
// Add adds new pair to the set, in both directions
|
|
func (am AliasMap) Add(name1, name2 string) {
|
|
if name1 != name2 {
|
|
am[name1] = name2
|
|
am[name2] = name1
|
|
}
|
|
}
|
|
|
|
// Alias returns the alternate version, if any, else the original.
|
|
func (am AliasMap) Alias(name1 string) string {
|
|
// note: we don't need to check normalization settings, because we already did it in March.
|
|
// the AliasMap will only exist if March paired up two unequal filenames.
|
|
name2, ok := am[name1]
|
|
if ok {
|
|
return name2
|
|
}
|
|
return name1
|
|
}
|
|
|
|
// ParseGlobs determines whether a string contains {brackets}
|
|
// and returns the substring (including both brackets) for replacing
|
|
// substring is first opening bracket to last closing bracket --
|
|
// good for {{this}} but not {this}{this}
|
|
func ParseGlobs(s string) (hasGlobs bool, substring string) {
|
|
open := strings.Index(s, "{")
|
|
close := strings.LastIndex(s, "}")
|
|
if open >= 0 && close > open {
|
|
return true, s[open : close+1]
|
|
}
|
|
return false, ""
|
|
}
|
|
|
|
// TrimBrackets converts {{this}} to this
|
|
func TrimBrackets(s string) string {
|
|
return strings.Trim(s, "{}")
|
|
}
|
|
|
|
// TimeFormat converts a user-supplied string to a Go time constant, if possible
|
|
func TimeFormat(timeFormat string) string {
|
|
switch timeFormat {
|
|
case "Layout":
|
|
timeFormat = time.Layout
|
|
case "ANSIC":
|
|
timeFormat = time.ANSIC
|
|
case "UnixDate":
|
|
timeFormat = time.UnixDate
|
|
case "RubyDate":
|
|
timeFormat = time.RubyDate
|
|
case "RFC822":
|
|
timeFormat = time.RFC822
|
|
case "RFC822Z":
|
|
timeFormat = time.RFC822Z
|
|
case "RFC850":
|
|
timeFormat = time.RFC850
|
|
case "RFC1123":
|
|
timeFormat = time.RFC1123
|
|
case "RFC1123Z":
|
|
timeFormat = time.RFC1123Z
|
|
case "RFC3339":
|
|
timeFormat = time.RFC3339
|
|
case "RFC3339Nano":
|
|
timeFormat = time.RFC3339Nano
|
|
case "Kitchen":
|
|
timeFormat = time.Kitchen
|
|
case "Stamp":
|
|
timeFormat = time.Stamp
|
|
case "StampMilli":
|
|
timeFormat = time.StampMilli
|
|
case "StampMicro":
|
|
timeFormat = time.StampMicro
|
|
case "StampNano":
|
|
timeFormat = time.StampNano
|
|
case "DateTime":
|
|
// timeFormat = time.DateTime // missing in go1.19
|
|
timeFormat = "2006-01-02 15:04:05"
|
|
case "DateOnly":
|
|
// timeFormat = time.DateOnly // missing in go1.19
|
|
timeFormat = "2006-01-02"
|
|
case "TimeOnly":
|
|
// timeFormat = time.TimeOnly // missing in go1.19
|
|
timeFormat = "15:04:05"
|
|
case "MacFriendlyTime", "macfriendlytime", "mac":
|
|
timeFormat = "2006-01-02 0304PM" // not actually a Go constant -- but useful as macOS filenames can't have colons
|
|
}
|
|
return timeFormat
|
|
}
|
|
|
|
// AppyTimeGlobs converts "myfile-{DateOnly}.txt" to "myfile-2006-01-02.txt"
|
|
func AppyTimeGlobs(s string, t time.Time) string {
|
|
hasGlobs, substring := ParseGlobs(s)
|
|
if !hasGlobs {
|
|
return s
|
|
}
|
|
timeString := t.Local().Format(TimeFormat(TrimBrackets(substring)))
|
|
return strings.ReplaceAll(s, substring, timeString)
|
|
}
|