mirror of
https://gitlab.com/shorewall/code.git
synced 2024-12-29 09:38:51 +01:00
81 lines
2.7 KiB
Plaintext
81 lines
2.7 KiB
Plaintext
|
#
|
||
|
|
# Shorewall 1.2 -- Interfaces File
|
||
|
|
#
|
||
|
|
# /etc/shorewall/interfaces
|
||
|
|
#
|
||
|
|
# Columns are:
|
||
|
|
#
|
||
|
|
# ZONE Zone for this interface. Much match the short name
|
||
|
|
# of a zone defined in /etc/shorewall/zones.
|
||
|
|
#
|
||
|
|
# $<variable-name> is not allowed in this column.
|
||
|
|
#
|
||
|
|
# INTERFACE Name of interface
|
||
|
|
#
|
||
|
|
# BROADCAST The broadcast address for the subnetwork to which the
|
||
|
|
# interface belongs. For P-T-P interfaces, this
|
||
|
|
# column is left black.
|
||
|
|
#
|
||
|
|
# If you use the special value "detect", the firewall
|
||
|
|
# will detect the broadcast address for you. If you
|
||
|
|
# select this option, the interface must be up before
|
||
|
|
# the firewall is started and you must have iproute
|
||
|
|
# installed.
|
||
|
|
#
|
||
|
|
# If you don't want to give a value for this column but
|
||
|
|
# you want to enter a value in the OPTIONS column, enter
|
||
|
|
# "-" in this column.
|
||
|
|
#
|
||
|
|
# OPTIONS A comma-separated list of options including the
|
||
|
|
# following:
|
||
|
|
#
|
||
|
|
# dhcp - interface is managed by DHCP
|
||
|
|
# noping - icmp echo-request (ping) packets should
|
||
|
|
# be ignored on this interface
|
||
|
|
# routestopped - When the firewall is stopped, allow
|
||
|
|
# and route traffic to and from this
|
||
|
|
# interface.
|
||
|
|
# norfc1918 - This interface should not receive
|
||
|
|
# any packets whose source is in one
|
||
|
|
# of the ranges reserved by RFC 1918
|
||
|
|
# (i.e., private or "non-routable"
|
||
|
|
# addresses.
|
||
|
|
# multi - This interface has multiple IP
|
||
|
|
# addresses and you want to be able to
|
||
|
|
# route between them.
|
||
|
|
# routefilter - turn on kernel route filtering for this
|
||
|
|
# interface (anti-spoofing measure).
|
||
|
|
#
|
||
|
|
# Example 1: Suppose you have eth0 connected to a DSL modem and
|
||
|
|
# eth1 connected to your local network and that your
|
||
|
|
# local subnet is 192.168.1.0/24. The interface gets
|
||
|
|
# it's IP address via DHCP from subnet
|
||
|
|
# 206.191.149.192/27 and you want pings from the internet
|
||
|
|
# to be ignored. You interface a DMZ with subnet
|
||
|
|
# 192.168.2.0/24 using eth2. You want to be able to
|
||
|
|
# access the firewall from the local network when the
|
||
|
|
# firewall is stopped.
|
||
|
|
#
|
||
|
|
# Your entries for this setup would look like:
|
||
|
|
#
|
||
|
|
# net eth0 206.191.149.223 noping,dhcp
|
||
|
|
# local eth1 192.168.1.255 routestopped
|
||
|
|
# dmz eth2 192.168.2.255
|
||
|
|
#
|
||
|
|
# Example 2: The same configuration without specifying broadcast
|
||
|
|
# addresses is:
|
||
|
|
#
|
||
|
|
# net eth0 detect noping,dhcp
|
||
|
|
# local eth1 detect routestopped
|
||
|
|
# dmz eth2 detect
|
||
|
|
#
|
||
|
|
# Example 3: You have a simple dial-in system with no ethernet
|
||
|
|
# connections and you want to ignore ping requests.
|
||
|
|
#
|
||
|
|
# net ppp0 - noping
|
||
|
|
##############################################################################
|
||
|
|
#ZONE INTERFACE BROADCAST OPTIONS
|
||
|
|
net eth0 detect dhcp,routefilter,norfc1918
|
||
|
|
loc eth1 detect routestopped
|
||
|
|
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
|