shorewall_code/manpages6-lite/shorewall6-lite.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall6-lite</refentrytitle>

    <manvolnum>8</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>shorewall6-lite</refname>

    <refpurpose>Administration tool for Shoreline Firewall 6 Lite
    (Shorewall6-lite)</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>allow</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>clear</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>disable</option></arg>

      <arg choice="plain">{ <replaceable>interface</replaceable> |
      <replaceable>provider</replaceable> }</arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>drop</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>dump</option></arg>

      <arg><option>-x</option></arg>

      <arg><option>-m</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>enable</option></arg>

      <arg choice="plain">{ <replaceable>interface</replaceable> |
      <replaceable>provider</replaceable> }</arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>forget</option></arg>

      <arg><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>help</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>hits</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>logdrop</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>logwatch</option></arg>

      <arg><option>-m</option></arg>

      <arg><replaceable>refresh-interval</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>logreject</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>reject</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg
      choice="plain"><option>restart</option><arg><option>-n</option></arg><arg><option>-p</option></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>restore</option></arg>

      <arg><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>save</option></arg>

      <arg choice="opt"><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>show</option></arg>

      <arg><option>-x</option></arg>

      <arg><option>-t</option>
      {<option>filter</option>|<option>mangle</option>|<option>raw</option>}</arg>

      <arg><arg><option>chain</option></arg><arg choice="plain"
      rep="repeat"><replaceable>chain</replaceable></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>show</option></arg>

      <arg><option>-f</option></arg>

      <arg choice="plain"><option>capabilities</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>show</option></arg>

      <arg
      choice="req"><option>actions|classifiers|connections|config|zones</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>show</option></arg>

      <arg><option>-x</option></arg>

      <arg choice="plain"><option>mangle</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>show</option></arg>

      <arg choice="plain"><option>tc</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>show</option></arg>

      <arg><option>-m</option></arg>

      <arg choice="plain"><option>log</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg
      choice="plain"><option>start</option><arg>-<option>n</option></arg><arg>-<option>p</option></arg><arg>-<option>f</option></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>stop</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>status</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>version</option></arg>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The shorewall6-lite utility is used to control the Shoreline
    Firewall 6 (Shorewall6) Lite.</para>
  </refsect1>

  <refsect1>
    <title>Options</title>

    <para>The <option>trace</option> and <option>debug</option> options are
    used for debugging. See <ulink
    url="http://www.shorewall.net/starting_and_stopping.htm#Trace">http://www.shorewall.net/starting_and_stopping.htm#Trace</ulink>.</para>

    <para>The nolock <option>option</option> prevents the command from
    attempting to acquire the Shorewall6 Lite lockfile. It is useful if you
    need to include <command>shorewall6-lite</command> commands in the
    <filename>started</filename> extension script.</para>

    <para>The <emphasis>options</emphasis> control the amount of output that
    the command produces. They consist of a sequence of the letters <emphasis
    role="bold">v</emphasis> and <emphasis role="bold">q</emphasis>. If the
    options are omitted, the amount of output is determined by the setting of
    the VERBOSITY parameter in <ulink
    url="shorewall6.conf.html">shorewall6.conf</ulink>(5). Each <emphasis
    role="bold">v</emphasis> adds one to the effective verbosity and each
    <emphasis role="bold">q</emphasis> subtracts one from the effective
    VERBOSITY. Anternately, <emphasis role="bold">v</emphasis> may be followed
    immediately with one of -1,0,1,2 to specify a specify VERBOSITY. There may
    be no white space between <emphasis role="bold">v</emphasis> and the
    VERBOSITY.</para>

    <para>The <emphasis>options</emphasis> may also include the letter
    <option>t</option> which causes all progress messages to be
    timestamped.</para>
  </refsect1>

  <refsect1>
    <title>Commands</title>

    <para>The available commands are listed below.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">allow</emphasis></term>

        <listitem>
          <para>Re-enables receipt of packets from hosts previously
          blacklisted by a <emphasis role="bold">drop</emphasis>, <emphasis
          role="bold">logdrop</emphasis>, <emphasis
          role="bold">reject</emphasis>, or <emphasis
          role="bold">logreject</emphasis> command.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">clear</emphasis></term>

        <listitem>
          <para>Clear will remove all rules and chains installed by Shorewall6
          Lite. The firewall is then wide open and unprotected. Existing
          connections are untouched. Clear is often used to see if the
          firewall is causing connection problems.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">disable</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Disables the optional provider
          associated with the specified <replaceable>interface</replaceable>
          or <replaceable>provider</replaceable>. Where more than one provider
          share a single network interface, a
          <replaceable>provider</replaceable> name must be given.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">drop</emphasis></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
          to be silently dropped.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">dump</emphasis></term>

        <listitem>
          <para>Produces a verbose report about the firewall configuration for
          the purpose of problem analysis.</para>

          <para>The <emphasis role="bold">-x</emphasis> option causes actual
          packet and byte counts to be displayed. Without that option, these
          counts are abbreviated. The <emphasis role="bold">-m</emphasis>
          option causes any MAC addresses included in Shorewall6 Lite log
          messages to be displayed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">enable</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Enables the optional provider
          associated with the specified <replaceable>interface</replaceable>
          or <replaceable>provider</replaceable>. Where more than one provider
          share a single network interface, a
          <replaceable>provider</replaceable> name must be given.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">forget</emphasis></term>

        <listitem>
          <para>Deletes /var/lib/shorewall6-lite/<emphasis>filenam</emphasis>e
          and /var/lib/shorewall6-lite/save. If no
          <emphasis>filename</emphasis> is given then the file specified by
          RESTOREFILE in <ulink
          url="shorewall6-lite.conf.html">shorewall6-lite.conf</ulink>(5) is
          assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">help</emphasis></term>

        <listitem>
          <para>Displays a syntax summary.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">hits</emphasis></term>

        <listitem>
          <para>Generates several reports from Shorewall6 Lite log messages in
          the current log file.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">logdrop</emphasis></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
          to be logged then discarded.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">logwatch</emphasis></term>

        <listitem>
          <para>Monitors the log file specified by theLOGFILE option in <ulink
          url="shorewall6-lite.conf.html">shorewall6-lite.conf</ulink>(5) and
          produces an audible alarm when new Shorewall6 Lite messages are
          logged. The <emphasis role="bold">-m</emphasis> option causes the
          MAC address of each packet source to be displayed if that
          information is available. The
          <replaceable>refresh-interval</replaceable> specifies the time in
          seconds between screen refreshes. You can enter a negative number by
          preceding the number with "--" (e.g., <command>shorewall6-lite
          logwatch -- -30</command>). In this case, when a packet count
          changes, you will be prompted to hit any key to resume screen
          refreshes.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">logreject</emphasis></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
          to be logged then rejected.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">reset</emphasis></term>

        <listitem>
          <para>All the packet and byte counters in the firewall are
          reset.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">restart</emphasis></term>

        <listitem>
          <para>Restart is similar to <emphasis role="bold">shorewall6-lite
          stop</emphasis> followed by <emphasis role="bold">shorewall6-lite
          start</emphasis>. Existing connections are maintained.</para>

          <para>The <option>-n</option> option causes Shorewall6 to avoid
          updating the routing table(s).</para>

          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">restore</emphasis></term>

        <listitem>
          <para>Restore Shorewall6 Lite to a state saved using the <emphasis
          role="bold">shorewall6-lite save</emphasis> command. Existing
          connections are maintained. The <emphasis>filename</emphasis> names
          a restore file in /var/lib/shorewall6-lite created using <emphasis
          role="bold">shorewall6-lite save</emphasis>; if no
          <emphasis>filename</emphasis> is given then Shorewall6 Lite will be
          restored from the file specified by the RESTOREFILE option in <ulink
          url="shorewall6-lite.conf.html">shorewall6-lite.conf</ulink>(5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">save</emphasis></term>

        <listitem>
          <para>The dynamic blacklist is stored in
          /var/lib/shorewall6-lite/save. The state of the firewall is stored
          in /var/lib/shorewall6-lite/<emphasis>filename</emphasis> for use by
          the <emphasis role="bold">shorewall6-lite restore</emphasis> and
          <emphasis role="bold">shorewall6-lite -f start</emphasis> commands.
          If <emphasis>filename</emphasis> is not given then the state is
          saved in the file specified by the RESTOREFILE option in <ulink
          url="shorewall6-lite.conf.html">shorewall6-lite.conf</ulink>(5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">show</emphasis></term>

        <listitem>
          <para>The show command can have a number of different
          arguments:</para>

          <variablelist>
            <varlistentry>
              <term><emphasis role="bold">actions</emphasis></term>

              <listitem>
                <para>Produces a report about the available actions (built-in,
                standard and user-defined).</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">capabilities</emphasis></term>

              <listitem>
                <para>Displays your kernel/iptables capabilities. The
                <emphasis role="bold">-f</emphasis> option causes the display
                to be formatted as a capabilities file for use with <emphasis
                role="bold">compile -e</emphasis>.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[ [ <option>chain</option> ] <emphasis>chain</emphasis>
              ... ]</term>

              <listitem>
                <para>The rules in each <emphasis>chain</emphasis> are
                displayed using the <emphasis role="bold">ip6tables
                -L</emphasis> <emphasis>chain</emphasis> <emphasis
                role="bold">-n -v</emphasis> command. If no
                <emphasis>chain</emphasis> is given, all of the chains in the
                filter table are displayed. The <emphasis
                role="bold">-x</emphasis> option is passed directly through to
                iptables and causes actual packet and byte counts to be
                displayed. Without this option, those counts are abbreviated.
                The <emphasis role="bold">-t</emphasis> option specifies the
                Netfilter table to display. The default is <emphasis
                role="bold">filter</emphasis>.</para>

                <para>If the <emphasis role="bold">t</emphasis> option and the
                <option>chain</option> keyword are both omitted and any of the
                listed <replaceable>chain</replaceable>s do not exist, a usage
                message will be displayed.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">classifiers</emphasis></term>

              <listitem>
                <para>Displays information about the packet classifiers
                defined on the system as a result of traffic shaping
                configuration.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">config</emphasis></term>

              <listitem>
                <para>Dispays distribution-specific defaults.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">connections</emphasis></term>

              <listitem>
                <para>Displays the IPv6 connections currently being tracked by
                the firewall.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">mangle</emphasis></term>

              <listitem>
                <para>Displays the Netfilter mangle table using the command
                <emphasis role="bold">ip6tables -t mangle -L -n
                -v</emphasis>.The <emphasis role="bold">-x</emphasis> option
                is passed directly through to iptables and causes actual
                packet and byte counts to be displayed. Without this option,
                those counts are abbreviated.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">tc</emphasis></term>

              <listitem>
                <para>Displays information about queuing disciplines, classes
                and filters.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">zones</emphasis></term>

              <listitem>
                <para>Displays the current composition of the Shorewall6 Lite
                zones on the system.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">start</emphasis></term>

        <listitem>
          <para>Start shorewall6 Lite. Existing connections through
          shorewall6-lite managed interfaces are untouched. New connections
          will be allowed only if they are allowed by the firewall rules or
          policies. If <emphasis role="bold">-f</emphasis> is specified, the
          saved configuration specified by the RESTOREFILE option in <ulink
          url="shorewall6-lite.conf.html">shorewall6-lite.conf</ulink>(5) will
          be restored if that saved configuration exists and has been modified
          more recently than the files in /etc/shorewall6.</para>

          <para>The <option>-n</option> option causes Shorewall6 to avoid
          updating the routing table(s).</para>

          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">stop</emphasis></term>

        <listitem>
          <para>Stops the firewall. All existing connections, except those
          listed in <ulink
          url="shorewall6-routestopped.html">shorewall6-routestopped</ulink>(5)
          or permitted by the ADMINISABSENTMINDED option in
          shorewall6.conf(5), are taken down. The only new traffic permitted
          through the firewall is from systems listed in <ulink
          url="shorewall6-routestopped.html">shorewall6-routestopped</ulink>(5)
          or by ADMINISABSENTMINDED.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">status</emphasis></term>

        <listitem>
          <para>Produces a short report about the state of the
          Shorewall6-configured firewall.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">version</emphasis></term>

        <listitem>
          <para>Displays Shorewall6-lite's version.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall6-lite/</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://www.shorewall.net/starting_and_stopping_shorewall6.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>

    <para>shorewall6-accounting(5), shorewall6-actions(5),
    shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5),
    shorewall6-maclist(5), shorewall6-params(5), shorewall6-policy(5),
    shorewall6-providers(5), shorewall6-route_rules(5),
    shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5),
    shorewall6-tcclasses(5), shorewall6-tcdevices(5), shorewall6-tcrules(5),
    shorewall6-tos(5), shorewall6-tunnels(5), shorewall6-zones(5)</para>
  </refsect1>
</refentry>