shorewall_code/Shorewall/manpages/shorewall-nesting.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall-nesting</refentrytitle>

    <manvolnum>5</manvolnum>

    <refmiscinfo>Configuration Files</refmiscinfo>
  </refmeta>

  <refnamediv>
    <refname>nesting</refname>

    <refpurpose>Shorewall Nested Zones</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <arg choice="plain"
      rep="norepeat"><replaceable>child-zone</replaceable>[:<replaceable>parent-zone</replaceable>[,<replaceable>parent-zone</replaceable>]...]</arg>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>In <ulink
    url="shorewall-zones.html">shorewall-zones</ulink>(5), a zone
    may be declared to be a sub-zone of one or more other zones using the
    above syntax. The <replaceable>child-zone</replaceable> may be neither the
    firewall zone nor a vserver zone. The firewall zone may not appear as a
    parent zone, although all vserver zones are handled as sub-zones of the
    firewall zone.</para>

    <para>Where zones are nested, the CONTINUE policy in <ulink
    url="shorewall-policy.html">shorewall-policy</ulink>(5) allows
    hosts that are within multiple zones to be managed under the rules of all
    of these zones.</para>
  </refsect1>

  <refsect1>
    <title>Example</title>

    <para><filename>/etc/shorewall/zones</filename>:</para>

    <programlisting>        #ZONE    TYPE        OPTION
        fw       firewall
        net      ipv4
        sam:net  ipv4
        loc      ipv4</programlisting>

    <para><filename>/etc/shorewall/interfaces</filename>:</para>

    <programlisting>        #ZONE     INTERFACE     BROADCAST     OPTIONS
        -         eth0          detect        dhcp,norfc1918
        loc       eth1          detect</programlisting>

    <para><filename>/etc/shorewall/hosts</filename>:</para>

    <programlisting>        #ZONE     HOST(S)                     OPTIONS
        net       eth0:0.0.0.0/0
        sam       eth0:206.191.149.197</programlisting>

    <para><filename>/etc/shorewall/policy</filename>:</para>

    <programlisting>        #SOURCE      DEST        POLICY       LOG LEVEL
        loc          net         ACCEPT
        sam          all         CONTINUE
        net          all         DROP         info
        all          all         REJECT       info</programlisting>

    <para>The second entry above says that when Sam is the client, connection
    requests should first be processed under rules where the source zone is
    sam and if there is no match then the connection request should be treated
    under rules where the source zone is net. It is important that this policy
    be listed BEFORE the next policy (net to all). You can have this policy
    generated for you automatically by using the IMPLICIT_CONTINUE option in
    <ulink
    url="shorewall.conf.html">shorewall.conf</ulink>(5).</para>

    <para>Partial <filename>/etc/shorewall/rules</filename>:</para>

    <programlisting>        #ACTION   SOURCE    DEST            PROTO    DPORT
        ...
        DNAT      sam       loc:192.168.1.3 tcp      ssh
        DNAT      net       loc:192.168.1.5 tcp      www
        ...</programlisting>

    <para>Given these two rules, Sam can connect to the firewall's internet
    interface with ssh and the connection request will be forwarded to
    192.168.1.3. Like all hosts in the net zone, Sam can connect to the
    firewall's internet interface on TCP port 80 and the connection request
    will be forwarded to 192.168.1.5. The order of the rules is not
    significant. Sometimes it is necessary to suppress port forwarding for a
    sub-zone. For example, suppose that all hosts can SSH to the firewall and
    be forwarded to 192.168.1.5 EXCEPT Sam. When Sam connects to the
    firewall's external IP, he should be connected to the firewall itself.
    Because of the way that Netfilter is constructed, this requires two rules
    as follows:</para>

    <programlisting>        #ACTION   SOURCE    DEST            PROTO    DPORT
        ...
        ACCEPT+   sam       $FW             tcp      ssh
        DNAT      net       loc:192.168.1.3 tcp      ssh
        ...</programlisting>

    <para>The first rule allows Sam SSH access to the firewall. The second
    rule says that any clients from the net zone with the exception of those
    in the “sam” zone should have their connection port forwarded to
    192.168.1.3. If you need to exclude more than one zone, simply use
    multiple ACCEPT+ rules. This technique also may be used when the ACTION is
    REDIRECT.</para>

    <para>Care must be taken when nesting occurs as a result of the use of
    wildcard interfaces (interface names ends in '+').</para>

    <para>Here's an example. <filename>/etc/shorewall/zones</filename>:</para>

    <para><filename>/etc/shorewall/interfaces</filename>:<programlisting>        #ZONE    INTERFACE      BROADCAST        OPTIONS
        net      ppp0
        loc      eth1
        loc      ppp+
        dmz      eth2</programlisting></para>

    <para>Because the net zone is declared before the loc zone, net is an
    implicit sub-zone of loc and in the absence of a net-&gt;... CONTINUE
    policy, traffic from the net zone will not be passed through loc-&gt;...
    rules. But DNAT and REDIRECT rules are an exception!</para>

    <itemizedlist>
      <listitem>
        <para>DNAT and REDIRECT rules generate two Netfilter rules: a 'nat'
        table rule that rewrites the destination IP address and/or port
        number, and a 'filter' table rule that ACCEPTs the rewritten
        connection.</para>
      </listitem>

      <listitem>
        <para>Policies only affect the 'filter' table.</para>
      </listitem>
    </itemizedlist>

    <para>As a consequence, the following rules will have unexpected
    behavior:<programlisting>        #ACTION     SOURCE               DEST      PROTO        DPORT
        ACCEPT      net                  dmz       tcp          80
        REDIRECT    loc                  3128      tcp          80</programlisting></para>

    <para>The second rule is intended to redirect local web requests to a
    proxy running on the firewall and listening on TCP port 3128. But the
    'nat' part of that rule will cause all connection requests for TCP port 80
    arriving on interface ppp+ (including ppp0!) to have their destination
    port rewritten to 3128. Hence, the web server running in the DMZ will be
    inaccessible from the web.</para>

    <para>The above problem can be corrected in several ways.</para>

    <para>The preferred way is to use the <option>ifname</option> pppd option
    to change the 'net' interface to something other than ppp0. That way, it
    won't match ppp+.</para>

    <para>If you are running Shorewall version 4.1.4 or later, a second way is
    to simply make the nested zones explicit:<programlisting>        #ZONE    TYPE        OPTION
        fw       firewall
        loc      ipv4
        net:loc  ipv4
        dmz      ipv4</programlisting></para>

    <para>If you take this approach, be sure to set IMPLICIT_CONTINUE=No in
    <filename>shorewall.conf</filename>.</para>

    <para>When using other Shorewall versions, another way is to rewrite the
    DNAT rule (assume that the local zone is entirely within
    192.168.2.0/23):<programlisting>        #ACTION     SOURCE                 DEST      PROTO      DPORT
        ACCEPT      net                    dmz       tcp        80
        REDIRECT    loc:192.168.2.0/23     3128      tcp        80</programlisting></para>

    <para>Another way is to restrict the definition of the loc zone:</para>

    <para><filename>/etc/shorewall/interfaces</filename>:<programlisting>        #ZONE    INTERFACE      BROADCAST        OPTIONS
        net      ppp0
        loc      eth1
        -        ppp+
        dmz      eth2</programlisting></para>

    <para><filename>/etc/shorewall/hosts</filename>:<programlisting>        #ZONE    HOST(S)             OPTIONS
        loc      ppp+:192.168.2.0/23</programlisting></para>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/zones</para>

    <para>/etc/shorewall/interfaces</para>

    <para>/etc/shorewall/hosts</para>

    <para>/etc/shorewall/policy</para>

    <para>/etc/shorewall/rules</para>

    <para>/etc/shorewall6/zones</para>

    <para>/etc/shorewall6/interfaces</para>

    <para>/etc/shorewall6/hosts</para>

    <para>/etc/shorewall6/policy</para>

    <para>/etc/shorewall6/rules</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
    shorewall-tunnels(5), shorewall-zones(5)</para>
  </refsect1>
</refentry>