shorewall_code/manpages/shorewall-interfaces.xml

<?xml version="1.0" encoding="UTF-8"?>
<refentry>
  <refmeta>
    <refentrytitle>shorewall-interfaces</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>interfaces</refname>

    <refpurpose>Shorewall interfaces file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/interfaces</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The interfaces file serves to define the firewall's network
    interfaces to Shorewall.</para>

    <para>The columns in the file are as follows.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">ZONE</emphasis> —
        <emphasis>zone-name</emphasis></term>

        <listitem>
          <para>Zone for this interface. Must match the name of a zone
          declared in /etc/shorewall/zones. You may not list the firewall zone
          in this column.</para>

          <para>If the interface serves multiple zones that will be defined in
          the <ulink url="shorewall-hosts.html">shorewall-hosts</ulink>(5)
          file, you should place "-" in this column.</para>

          <para>If there are multiple interfaces to the same zone, you must
          list them in separate entries.</para>

          <para>Example:</para>

          <blockquote>
            <programlisting>#ZONE   INTERFACE       BROADCAST
loc     eth1            -
loc     eth2            -</programlisting>
          </blockquote>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">INTERFACE</emphasis> —
        <emphasis>interface</emphasis></term>

        <listitem>
          <para>Name of interface. Each interface may be listed only once in
          this file. You may NOT specify the name of a "virtual" interface
          (e.g., eth0:0) here; see <ulink
          url="http://www.shorewall.net/FAQ.htm#faq18">http://www.shorewall.net/FAQ.htm#faq18</ulink></para>

          <para>You may use wildcards here by specifying a prefix followed by
          the plus sign ("+"). For example, if you want to make an entry that
          applies to all PPP interfaces, use 'ppp+'; that would match ppp1,
          ppp2, …</para>

          <para>There is no need to define the loopback interface (lo) in this
          file.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">BROADCAST</emphasis> (Optional) —
        {<emphasis role="bold">-</emphasis>|<emphasis
        role="bold">detect</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...}</term>

        <listitem>
          <para>The broadcast address(es) for the network(s) to which the
          interface belongs. For P-T-P interfaces, this column is left
          blank.If the interface has multiple addresses on multiple subnets
          then list the broadcast addresses as a comma-separated list.</para>

          <para>If you use the special value <emphasis
          role="bold">detect</emphasis>, Shorewall will detect the broadcast
          address(es) for you. If you select this option, the interface must
          be up before the firewall is started.</para>

          <para>If you don't want to give a value for this column but you want
          to enter a value in the OPTIONS column, enter <emphasis
          role="bold">-</emphasis> in this column.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">OPTIONS</emphasis> (Optional) —
        [<emphasis>option</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>

        <listitem>
          <para>A comma-separated list of options from the following list. The
          order in which you list the options is not significant but the list
          should have no embedded white space.</para>

          <variablelist>
            <varlistentry>
              <term><emphasis role="bold">dhcp</emphasis></term>

              <listitem>
                <para>Specify this option when any of the following are
                true:</para>

                <orderedlist spacing="compact">
                  <listitem>
                    <para>the interface gets its IP address via DHCP</para>
                  </listitem>

                  <listitem>
                    <para>the interface is used by a DHCP server running on
                    the firewall</para>
                  </listitem>

                  <listitem>
                    <para>you have a static IP but are on a LAN segment with
                    lots of DHCP clients.</para>
                  </listitem>

                  <listitem>
                    <para>the interface is a bridge with a DHCP server on one
                    port and DHCP clients on another port.</para>
                  </listitem>
                </orderedlist>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">norfc1918</emphasis></term>

              <listitem>
                <para>This interface should not receive any packets whose
                source is in one of the ranges reserved by RFC 1918 (i.e.,
                private or "non-routable" addresses). If packet mangling or
                connection-tracking match is enabled in your kernel, packets
                whose destination addresses are reserved by RFC 1918 are also
                rejected.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">routefilter</emphasis></term>

              <listitem>
                <para>Turn on kernel route filtering for this interface
                (anti-spoofing measure). This option can also be enabled
                globally in the <ulink
                url="shorewall.conf.html">shorewall.conf</ulink>(5)
                file.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">logmartians</emphasis></term>

              <listitem>
                <para>Turn on kernel martian logging (logging of packets with
                impossible source addresses. It is suggested that if you set
                <emphasis role="bold">routefilter</emphasis> on an interface
                that you also set <emphasis
                role="bold">logmartians</emphasis>. This option may also be
                enabled globally in the <ulink
                url="shorewall.conf.html">shorewall.conf</ulink>(5)
                file.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">blacklist</emphasis></term>

              <listitem>
                <para>Check packets arriving on this interface against the
                <ulink
                url="shorewall-blacklist.html">shorewall-blacklist</ulink>(5)
                file.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">maclist</emphasis></term>

              <listitem>
                <para>Connection requests from this interface are compared
                against the contents of <ulink
                url="shorewall-maclist.html">shorewall-maclist</ulink>(5). If
                this option is specified, the interface must be an ethernet
                NIC and must be up before Shorewall is started.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">tcpflags</emphasis></term>

              <listitem>
                <para>Packets arriving on this interface are checked for
                certain illegal combinations of TCP flags. Packets found to
                have such a combination of flags are handled according to the
                setting of TCP_FLAGS_DISPOSITION after having been logged
                according to the setting of TCP_FLAGS_LOG_LEVEL.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">proxyarp</emphasis></term>

              <listitem>
                <para>Sets
                /proc/sys/net/ipv4/conf/<emphasis>interface</emphasis>/proxy_arp.
                Do NOT use this option if you are employing Proxy ARP through
                entries in <ulink
                url="shorewall-proxyarp.html">shorewall-proxyarp</ulink>(5).
                This option is intended solely for use with Proxy ARP
                sub-networking as described at: <ulink
                url="http://tldp.org/HOWTO/Proxy-ARP-Subnet/index.html">http://tldp.org/HOWTO/Proxy-ARP-Subnet/index.html</ulink></para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">routeback</emphasis></term>

              <listitem>
                <para>If specified, indicates that Shorewall should include
                rules that allow filtering traffic arriving on this interface
                back out that same interface. This option is also required
                when you have used a wildcard in the INTERFACE column if you
                want to allow traffic between the interfaces that match the
                wildcard.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">arp_filter</emphasis></term>

              <listitem>
                <para>If specified, this interface will only respond to ARP
                who-has requests for IP addresses configured on the interface.
                If not specified, the interface can respond to ARP who-has
                requests for IP addresses on any of the firewall's interface.
                The interface must be up when Shorewall is started.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">arp_ignore</emphasis>[=<emphasis>number</emphasis>]</term>

              <listitem>
                <para>If specified, this interface will respond to arp
                requests based on the value of <emphasis>number</emphasis>
                (defaults to 1).</para>

                <para>1 - reply only if the target IP address is local address
                configured on the incoming interface</para>

                <para>2 - reply only if the target IP address is local address
                configured on the incoming interface and the sender's IP
                address is part from same subnet on this interface</para>

                <para>3 - do not reply for local addresses configured with
                scope host, only resolutions for global and link</para>

                <para>4-7 - reserved</para>

                <para>8 - do not reply for all local addresses</para>

                <warning>
                  <para>Do not specify <emphasis
                  role="bold">arp_ignore</emphasis> for any interface involved
                  in <ulink url="../ProxyARP.htm">Proxy ARP</ulink>.</para>
                </warning>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">nosmurfs</emphasis></term>

              <listitem>
                <para>Filter packets for smurfs (packets with a broadcast
                address as the source).</para>

                <para>Smurfs will be optionally logged based on the setting of
                SMURF_LOG_LEVEL in <ulink
                url="shorewall.conf.html">shorewall.conf</ulink>(5). After
                logging, the packets are dropped.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">detectnets</emphasis></term>

              <listitem>
                <para>Automatically taylors the zone named in the ZONE column
                to include only those hosts routed through the
                interface.</para>

                <warning>
                  <para>Do not set the <emphasis
                  role="bold">detectnets</emphasis> option on your internet
                  interface.</para>
                </warning>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">sourceroute</emphasis></term>

              <listitem>
                <para>If this option is not specified for an interface, then
                source-routed packets will not be accepted from that interface
                (sets
                /proc/sys/net/ipv4/conf/<emphasis>interface</emphasis>/accept_source_route
                to 1). Only set this option if you know what you are doing.
                This might represent a security risk and is not usually
                needed.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">upnp</emphasis></term>

              <listitem>
                <para>Incoming requests from this interface may be remapped
                via UPNP (upnpd). See <ulink
                url="../UPnP.html">http://www.shorewall.net/UPnP.html</ulink>.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Example</title>

    <variablelist>
      <varlistentry>
        <term>Example 1:</term>

        <listitem>
          <para>Suppose you have eth0 connected to a DSL modem and eth1
          connected to your local network and that your local subnet is
          192.168.1.0/24. The interface gets it's IP address via DHCP from
          subnet 206.191.149.192/27. You have a DMZ with subnet 192.168.2.0/24
          using eth2.</para>

          <para>Your entries for this setup would look like:</para>

          <programlisting>#ZONE   INTERFACE BROADCAST        OPTIONS
net     eth0      206.191.149.223  dhcp
loc     eth1      192.168.1.255
dmz     eth2      192.168.2.255</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 2:</term>

        <listitem>
          <para>The same configuration without specifying broadcast addresses
          is:</para>

          <programlisting>#ZONE   INTERFACE BROADCAST        OPTIONS
net     eth0      detect           dhcp
loc     eth1      detect
dmz     eth2      detect</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 3:</term>

        <listitem>
          <para>You have a simple dial-in system with no ethernet
          connections.</para>

          <programlisting>#ZONE   INTERFACE BROADCAST        OPTIONS
net     ppp0      -</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/interfaces</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://www.shorewall.net/Documentation.htm#Interfaces">http://www.shorewall.net/Documentation.htm#Interfaces</ulink></para>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall-ipsec(5),
    shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5),
    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
    shorewall-providers(5), shorewall-proxyarp(5), shorewall-route_routes(5),
    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
    shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5),
    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
  </refsect1>
</refentry>