shorewall_code/Shorewall-docs/blacklisting_support.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Shorewall Blacklisting Support</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate>2004-01-05</pubdate>

    <copyright>
      <year>2002-2004</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <section>
    <title>Introduction</title>

    <para>Shorewall supports two different forms of blacklisting; static and
    dynamic. Beginning with Shorewall version 1.4.8, the BLACKLISTNEWONLY
    option in /etc/shorewall/shorewall.conf controls the degree of blacklist
    filtering:</para>

    <orderedlist>
      <listitem>
        <para>BLACKLISTNEWONLY=No --&#x00A0; All incoming packets are checked
        against the blacklist. New blacklist entries can be used to terminate
        existing connections. Versions of Shorewall prior to 1.4.8 behave in
        this manner.</para>
      </listitem>

      <listitem>
        <para>BLACKLISTNEWONLY=Yes -- The blacklists are only consulted for
        new connection requests. Blacklists may not be used to terminate
        existing connections. Only the source address is checked against the
        blacklists.</para>
      </listitem>
    </orderedlist>

    <para>Only the source address is checked against the blacklists.</para>
  </section>

  <section>
    <title>Static Blacklisting</title>

    <para>Shorewall static blacklisting support has the following
    configuration parameters:</para>

    <itemizedlist>
      <listitem>
        <para>You specify whether you want packets from blacklisted hosts
        dropped or rejected using the BLACKLIST_DISPOSITION setting in <ulink
        url="Documentation.htm#Config"><filename>/etc/shorewall/shorewall.conf</filename>.</ulink></para>
      </listitem>

      <listitem>
        <para>You specify whether you want packets from blacklisted hosts
        logged and at what syslog level using the BLACKLIST_LOGLEVEL setting
        in <ulink url="Documentation.htm#Config"><filename>/etc/shorewall/shorewall.conf</filename></ulink>.</para>
      </listitem>

      <listitem>
        <para>You list the IP addresses/subnets that you wish to blacklist in
        <ulink url="Documentation.htm#Blacklist"><filename>/etc/shorewall/blacklist</filename></ulink>.
        Beginning with Shorewall version 1.3.8, you may also specify PROTOCOL
        and Port numbers/Service names in the blacklist file.</para>
      </listitem>

      <listitem>
        <para>You specify the interfaces whose incoming packets you want
        checked against the blacklist using the <quote>blacklist</quote>
        option in <ulink url="Documentation.htm#Interfaces"><filename>/etc/shorewall/interfaces</filename></ulink>.</para>
      </listitem>

      <listitem>
        <para>The black list is refreshed from <filename>/etc/shorewall/blacklist</filename>
        by the <quote><ulink url="starting_and_stopping_shorewall.htm"><command>shorewall
        refresh</command></ulink></quote> command.</para>
      </listitem>
    </itemizedlist>
  </section>

  <section>
    <title>Dynamic Blacklisting</title>

    <para>Dynamic blacklisting support was added in version 1.3.2. Dynamic
    blacklisting doesn&#39;t use any configuration parameters but is rather
    controlled using /sbin/shorewall commands:</para>

    <itemizedlist>
      <listitem>
        <para>drop <emphasis>&#60;ip address list&#62;</emphasis> - causes
        packets from the listed IP addresses to be silently dropped by the
        firewall.</para>
      </listitem>

      <listitem>
        <para>reject <emphasis>&#60;ip address list&#62;</emphasis> - causes
        packets from the listed IP addresses to be rejected by the firewall.</para>
      </listitem>

      <listitem>
        <para>allow <emphasis>&#60;ip address list&#62;</emphasis> -
        re-enables receipt of packets from hosts previously blacklisted by a
        <emphasis>drop</emphasis> or <emphasis>reject</emphasis> command.</para>
      </listitem>

      <listitem>
        <para>save - save the dynamic blacklisting configuration so that it
        will be automatically restored the next time that the firewall is
        restarted.</para>
      </listitem>

      <listitem>
        <para>show dynamic - displays the dynamic blacklisting configuration.</para>
      </listitem>
    </itemizedlist>

    <para>Dynamic blacklisting is not dependent on the <quote>blacklist</quote>
    option in <filename>/etc/shorewall/interfaces</filename>.</para>

    <example>
      <title>Ingore packets from a pair of systems</title>

      <programlisting>    <command>shorewall drop 192.0.2.124 192.0.2.125</command></programlisting>

      <para>Drops packets from hosts 192.0.2.124 and 192.0.2.125</para>
    </example>

    <example>
      <title>Re-enable packetes from a system</title>

      <programlisting>    <command>shorewall allow 192.0.2.125</command></programlisting>

      <para>Re-enables traffic from 192.0.2.125.</para>
    </example>
  </section>
</article>