shorewall_code/Shorewall/Perl/lib.runtime

1396 lines
30 KiB
Plaintext
Raw Normal View History

# (c) 1999-2016 - Tom Eastep (teastep@shorewall.net)
#
2015-05-05 19:40:17 +02:00
# This program is part of Shorewall.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by the
2015-05-05 19:40:17 +02:00
# Free Software Foundation, either version 2 of the license or, at your
# option, any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# Options are:
#
2015-05-05 19:40:17 +02:00
# -n Do not alter Routing
# -v and -q Standard Shorewall Verbosity control
# -t Timestamp progress messages
# -p Purge conntrack table
# -r Recover from failed start/reload
2015-05-05 19:40:17 +02:00
# -V <verbosity> Set verbosity level explicitly
# -R <restore> Overrides RESTOREFILE setting
#
# Commands are:
#
2015-05-05 19:40:17 +02:00
# clear Removes all firewall rules
# disable Disable an optional interface
# down Stop an optional interface
# enable Enable an optional interface
# help Show command syntax
# reenable Disable then nable an optional
# interface
# refresh Refresh the firewall
# reload Reload the firewall
# restart Restarts the firewall
# restore Restore a saved configuration
# reset Reset byte and packet counters
# run Call a function in this program
# savesets Save the ipset contents
# status Displays firewall status
# start Starts the firewall
# stop Stops the firewall
# up Start an optional interface
# version Displays the version of Shorewall that
# generated this program
#
################################################################################
# Functions imported from /usr/share/shorewall/lib.runtime
################################################################################
2015-05-05 19:40:17 +02:00
# Address family-neutral Functions
################################################################################
#
# Conditionally produce message
#
progress_message() # $* = Message
{
local timestamp
timestamp=
if [ $VERBOSITY -gt 1 ]; then
[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
echo "${timestamp}$@"
fi
if [ $LOG_VERBOSITY -gt 1 ]; then
timestamp="$(date +'%b %e %T') "
echo "${timestamp}$@" >> $STARTUP_LOG
fi
}
progress_message2() # $* = Message
{
local timestamp
timestamp=
if [ $VERBOSITY -gt 0 ]; then
[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
echo "${timestamp}$@"
fi
if [ $LOG_VERBOSITY -gt 0 ]; then
timestamp="$(date +'%b %e %T') "
echo "${timestamp}$@" >> $STARTUP_LOG
fi
}
progress_message3() # $* = Message
{
local timestamp
timestamp=
if [ $VERBOSITY -ge 0 ]; then
[ -n "$g_timestamp" ] && timestamp="$(date +%H:%M:%S) "
echo "${timestamp}$@"
fi
if [ $LOG_VERBOSITY -ge 0 ]; then
timestamp="$(date +'%b %e %T') "
echo "${timestamp}$@" >> $STARTUP_LOG
fi
}
#
# Set a standard chain's policy
#
setpolicy() # $1 = name of chain, $2 = policy
{
run_iptables -P $1 $2
}
#
# Generate a list of all network interfaces on the system
#
find_all_interfaces() {
${IP:-ip} link list | egrep '^[[:digit:]]+:' | cut -d ' ' -f2 | sed -r 's/(@.*)?:$//'
}
#
# Generate a list of all network interfaces on the system that have an ipvX address
#
find_all_interfaces1() {
${IP:-ip} -$g_family addr list | egrep '^[[:digit:]]+:' | cut -d ' ' -f2 | sed -r 's/(@.*)?:$//'
}
#
# Find the value 'dev' in the passed arguments then echo the next value
#
find_device() {
while [ $# -gt 1 ]; do
[ "x$1" = xdev ] && echo $2 && return
shift
done
}
#
# Find the value 'via' in the passed arguments then echo the next value
#
find_gateway() {
while [ $# -gt 1 ]; do
[ "x$1" = xvia ] && echo $2 && return
shift
done
}
#
# Find the value 'mtu' in the passed arguments then echo the next value
#
find_mtu() {
while [ $# -gt 1 ]; do
[ "x$1" = xmtu ] && echo $2 && return
shift
done
}
#
# Find the value 'peer' in the passed arguments then echo the next value up to
# "/"
#
find_peer() {
while [ $# -gt 1 ]; do
[ "x$1" = xpeer ] && echo ${2%/*} && return
shift
done
}
#
# Try to find the gateway through an interface looking for 'nexthop'
find_nexthop() # $1 = interface
{
echo $(find_gateway `$IP -$g_family route list | grep "[[:space:]]nexthop.* $1"`)
}
#
# Find the default route's interface
#
find_default_interface() {
$IP -$g_family route list | while read first rest; do
[ "$first" = default ] && echo $(find_device $rest) && return
done
}
#
# Determine if Interface is up
#
interface_is_up() {
[ -n "$($IP -$g_family link list dev $1 2> /dev/null | grep -e '[<,]UP[,>]')" ]
}
#
# echo the list of networks routed out of a given interface
#
get_routed_networks() # $1 = interface name, $2-n = Fatal error message
{
local address
local rest
local mask
[ $g_family -eq 4 ] && mask=32 || mask=128
$IP -$g_family route show dev $1 2> /dev/null |
while read address rest; do
case "$address" in
default)
if [ $# -gt 1 ]; then
shift
fatal_error "$@"
else
echo "WARNING: default route ignored on interface $1" >&2
fi
;;
multicast|broadcast|prohibit|nat|throw|nexthop)
;;
[2-3]*)
[ "$address" = "${address%/*}" ] && address="${address}/${mask}"
echo $address
;;
*)
if [ $g_family -eq 4 ]; then
[ "$address" = "${address%/*}" ] && address="${address}/${mask}"
echo $address
fi
;;
esac
done
}
#
# Clear the current traffic shaping configuration
#
delete_tc1()
{
clear_one_tc() {
$TC qdisc del dev ${1%@*} root 2> /dev/null
$TC qdisc del dev ${1%@*} ingress 2> /dev/null
}
run_tcclear_exit
run_ip link list | \
while read inx interface details; do
case $inx in
[0-9]*)
clear_one_tc ${interface%:}
;;
*)
;;
esac
done
}
#
# Detect a device's MTU -- echos the passed device's MTU
#
get_device_mtu() # $1 = device
{
local output
output="$($IP link list dev $1 2> /dev/null)" # quotes required for /bin/ash
if [ -n "$output" ]; then
echo $(find_mtu $output)
else
echo 1500
fi
}
#
# Version of the above that doesn't generate any output for MTU 1500.
# Generates 'mtu <mtu+>' otherwise, where <mtu+> is the device's MTU + 100
#
get_device_mtu1() # $1 = device
{
local output
output="$($IP link list dev $1 2> /dev/null)" # quotes required for /bin/ash
local mtu
if [ -n "$output" ]; then
mtu=$(find_mtu $output)
if [ -n "$mtu" ]; then
[ $mtu = 1500 ] || echo mtu $(($mtu + 100))
fi
fi
}
#
# Undo changes to routing
#
undo_routing() {
local undofiles
local f
if [ -z "$g_noroutes" ]; then
#
# Restore rt_tables database
#
if [ -f ${VARDIR}/rt_tables ]; then
[ -w /etc/iproute2/rt_table -a -z "$KEEP_RT_TABLES" ] && cp -f ${VARDIR}/rt_tables /etc/iproute2/ && progress_message "/etc/iproute2/rt_tables database restored"
rm -f ${VARDIR}/rt_tables
fi
#
# Restore the rest of the routing table
#
undofiles="$(ls ${VARDIR}/undo_*routing 2> /dev/null)"
if [ -n "$undofiles" ]; then
for f in $undofiles; do
. $f
done
rm -f $undofiles
progress_message "Shorewall-generated routing tables and routing rules removed"
fi
fi
}
#
# Save the default route
#
save_default_route() {
awk \
'BEGIN {defroute=0;};
/^default / {defroute=1; print; next};
/nexthop/ {if (defroute == 1 ) {print ; next} };
{ defroute=0; };'
}
#
# Restore the default route that was in place before the initial 'shorewall start'
#
replace_default_route() # $1 = USE_DEFAULT_RT
{
#
# default_route and result are inherited from the caller
#
if [ -n "$default_route" ]; then
case "$default_route" in
*metric*)
#
# Don't restore a default route with a metric unless USE_DEFAULT_RT=Yes. Otherwise, we only replace the one with metric 0
#
[ -n "$1" ] && qt $IP -$g_family route replace $default_route && progress_message "Default Route (${default_route# }) restored"
default_route=
;;
*)
qt $IP -$g_family route replace $default_route && progress_message "Default Route (${default_route# }) restored"
result=0
default_route=
;;
esac
fi
}
#
# Delete default routes with metric 0 from the passed routing table
#
delete_default_routes() # $1 = table number
{
$IP -$g_family route ls table $1 | grep -F default | grep -vF metric | while read route; do
qt $IP -$g_family route del $route
done
}
restore_default_route() # $1 = USE_DEFAULT_RT
{
local result
result=1
if [ -z "$g_noroutes" -a -f ${VARDIR}/default_route ]; then
local default_route
default_route=
local route
while read route ; do
case $route in
default*)
replace_default_route $1
default_route="$default_route $route"
;;
*)
default_route="$default_route $route"
;;
esac
done < ${VARDIR}/default_route
replace_default_route $1
if [ $result = 1 ]; then
#
# We didn't restore a default route with metric 0
#
if $IP -$g_family -o route list 2> /dev/null | grep -F default | grep -qvF metric; then
#
# But we added a default route with metric 0
#
qt $IP -$g_family route del default metric 0 && progress_message "Default route with metric 0 deleted"
fi
fi
rm -f ${VARDIR}/default_route
fi
return $result
}
#
# Flush the conntrack table if $g_purge is non-empty
#
conditionally_flush_conntrack() {
if [ -n "$g_purge" ]; then
if [ -n $(mywhich conntrack) ]; then
conntrack -F
else
error_message "WARNING: The '-p' option requires the conntrack utility which does not appear to be installed on this system"
fi
fi
}
#
# Issue a message and stop/restore the firewall.
#
fatal_error()
{
echo " ERROR: $@" >&2
if [ $LOG_VERBOSITY -ge 0 ]; then
timestamp="$(date +'%b %e %T') "
echo "${timestamp} ERROR: $@" >> $STARTUP_LOG
fi
stop_firewall
[ -n "$TEMPFILE" ] && rm -f $TEMPFILE
mutex_off
exit 2
}
#
# Run iptables/ip6tables and if an error occurs, stop/restore the firewall
#
run_iptables()
{
local status
while [ 1 ]; do
eval $g_tool $@
status=$?
[ $status -ne 4 ] && break
done
if [ $status -ne 0 ]; then
error_message "ERROR: Command \"$g_tool $@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run iptables/ip6tables retrying exit status 4
#
do_iptables()
{
local status
while [ 1 ]; do
$g_tool $@
status=$?
[ $status -ne 4 ] && return $status;
done
}
#
# Run ip and if an error occurs, stop/restore the firewall
#
run_ip()
{
if ! $IP -$g_family $@; then
error_message "ERROR: Command \"$IP -$g_family $@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run tc and if an error occurs, stop/restore the firewall
#
run_tc() {
if ! $TC $@ ; then
error_message "ERROR: Command \"$TC $@\" Failed"
stop_firewall
exit 2
fi
}
#
# Run the .iptables_restore_input as a set of discrete iptables commands
#
debug_restore_input() {
local first second rest table chain
#
# Clear the ruleset
#
qt1 $g_tool -t mangle -F
qt1 $g_tool -t mangle -X
for chain in PREROUTING INPUT FORWARD POSTROUTING; do
qt1 $g_tool -t mangle -P $chain ACCEPT
done
qt1 $g_tool -t raw -F
qt1 $g_tool -t raw -X
for chain in PREROUTING OUTPUT; do
qt1 $g_tool -t raw -P $chain ACCEPT
done
qt1 $g_tool -t rawpost -F
qt1 $g_tool -t rawpost -X
for chain in POSTROUTING; do
qt1 $g_tool -t rawpost -P $chain ACCEPT
done
qt1 $g_tool -t nat -F
qt1 $g_tool -t nat -X
for chain in PREROUTING POSTROUTING; do
qt1 $g_tool -t nat -P $chain ACCEPT
done
qt1 $g_tool -t filter -F
qt1 $g_tool -t filter -X
for chain in INPUT FORWARD OUTPUT; do
qt1 $g_tool -t filter -P $chain -P ACCEPT
done
while read first second rest; do
case $first in
-*)
#
# We can't call run_iptables() here because the rules may contain quoted strings
#
eval $g_tool -t $table $first $second $rest
if [ $? -ne 0 ]; then
error_message "ERROR: Command \"$g_tool -t $table $first $second $rest\" Failed"
stop_firewall
exit 2
fi
;;
:*)
chain=${first#:}
if [ "x$second" = x- ]; then
do_iptables -t $table -N $chain
else
do_iptables -t $table -P $chain $second
fi
if [ $? -ne 0 ]; then
error_message "ERROR: Command \"$g_tool $first $second $rest\" Failed"
stop_firewall
exit 2
fi
;;
#
# This grotesque hack with the table names works around a bug/feature with ash
#
'*'raw)
table=raw
;;
'*'rawpost)
table=rawpost
;;
'*'mangle)
table=mangle
;;
'*'nat)
table=nat
;;
'*'filter)
table=filter
;;
esac
done
}
interface_enabled() {
status=0
if [ -f ${VARDIR}/${1}_disabled ]; then
status=1
elif [ -f ${VARDIR}/${1}.status ]; then
status=$(cat ${VARDIR}/${1}.status)
fi
return $status
}
distribute_load() {
local interface
local currentload # Total load of enabled interfaces
local load # Specified load of an enabled interface
local mark # Mark of an enabled interface
local totalload # Total load of all interfaces - usually 1.000000
local nload # Normalized load of an enabled interface
local var # Interface name to embed in a variable name
totalload=$1
shift
currentload=0
for interface in $@; do
if interface_enabled $interface; then
var=$(echo $interface | sed 's/[.-]/_/g')
load=$(cat ${VARDIR}/${interface}_load)
eval ${var}_load=$load
mark=$(cat ${VARDIR}/${interface}_mark)
eval ${var}_mark=$mark
currentload=$( bc <<EOF
scale=8
$currentload + $load
EOF
)
fi
done
if [ $currentload ]; then
for interface in $@; do
qt $g_tool -t mangle -F ~$interface
var=$(echo $interface | sed 's/[.-]/_/g')
eval load=\$${var}_load
eval mark=\$${var}_mark
if [ -n "$load" ]; then
nload=$(bc <<EOF
scale=8
( $load / $currentload ) * $totalload
EOF
)
currentload=$(bc <<EOF
scale=8
$currentload - $load
EOF
)
case $nload in
.*|0.*)
run_iptables -t mangle -A ~$interface -m statistic --mode random --probability $nload -j MARK --set-mark $mark
;;
*)
run_iptables -t mangle -A ~$interface -j MARK --set-mark $mark
;;
esac
fi
done
fi
}
?if __IPV4
#################################################################################
# IPv4-specific Functions
#################################################################################
#
# Determine if interface is usable from a Netfilter perspective
#
interface_is_usable() # $1 = interface
{
local status;
status=0
if ! loopback_interface $1; then
if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != 0.0.0.0 ]; then
if [ "$COMMAND" != enable ]; then
[ ! -f ${VARDIR}/${1}_disabled ] && run_isusable_exit $1
status=$?
fi
else
status=1
fi
fi
return $status
}
#
# Find interface addresses--returns the set of addresses assigned to the passed device
#
find_interface_addresses() # $1 = interface
{
$IP -f inet addr show $1 2> /dev/null | grep inet\ | sed 's/\s*inet //;s/\/.*//;s/ peer.*//'
}
#
# Find the value 'weight' in the passed arguments then echo the next value
#
find_weight() {
while [ $# -gt 1 ]; do
[ "x$1" = xweight ] && echo $2 && return
shift
done
}
#
# Find the interfaces that have a route to the passed address - the default
# route is not used.
#
find_rt_interface() {
$IP -4 route list | while read addr rest; do
case $addr in
*/*)
in_network ${1%/*} $addr && echo $(find_device $rest)
;;
default)
;;
*)
if [ "$addr" = "$1" -o "$addr/32" = "$1" ]; then
echo $(find_device $rest)
fi
;;
esac
done
}
#
# Echo the name of the interface(s) that will be used to send to the
# passed address
#
find_interface_by_address() {
local dev
dev="$(find_rt_interface $1)"
local first
local rest
[ -z "$dev" ] && dev=$(find_default_interface)
[ -n "$dev" ] && echo $dev
}
#
# echo the list of networks routed out of a given interface
#
get_routed_networks() # $1 = interface name, $2-n = Fatal error message
{
local address
local rest
$IP -4 route show dev $1 2> /dev/null |
while read address rest; do
case "$address" in
default)
if [ $# -gt 1 ]; then
shift
fatal_error "$@"
else
echo "WARNING: default route ignored on interface $1" >&2
fi
;;
multicast|broadcast|prohibit|nat|throw|nexthop)
;;
*)
[ "$address" = "${address%/*}" ] && address="${address}/32"
echo $address
;;
esac
done
}
#
# Get the broadcast addresses associated with an interface
#
get_interface_bcasts() # $1 = interface
{
local addresses
addresses=
$IP -f inet addr show dev $1 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
}
#
# Delete IP address
#
del_ip_addr() # $1 = address, $2 = interface
{
[ $(find_first_interface_address_if_any $2) = $1 ] || qtnoin $IP addr del $1 dev $2
}
# Add IP Aliases
#
add_ip_aliases() # $* = List of addresses
{
local local
local addresses
local external
local interface
local inet
local cidr
local rest
local val
local arping
arping=$(mywhich arping)
address_details()
{
#
# Folks feel uneasy if they don't see all of the same
# decoration on these IP addresses that they see when their
# distro's net config tool adds them. In an attempt to reduce
# the anxiety level, we have the following code which sets
# the VLSM and BRD from an existing address in the same network
#
# Get all of the lines that contain inet addresses with broadcast
#
$IP -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | while read inet cidr rest ; do
case $cidr in
*/*)
if in_network $external $cidr; then
echo "/${cidr#*/} brd $(broadcastaddress $cidr)"
break
fi
;;
esac
done
}
do_one()
{
val=$(address_details)
$IP addr add ${external}${val} dev $interface $label
[ -n "$arping" ] && qt $arping -U -c 2 -I $interface $external
echo "$external $interface" >> $VARDIR/nat
[ -n "$label" ] && label="with $label"
progress_message " IP Address $external added to interface $interface $label"
}
progress_message "Adding IP Addresses..."
while [ $# -gt 0 ]; do
external=$1
interface=$2
label=
if [ "$interface" != "${interface%:*}" ]; then
label="${interface#*:}"
interface="${interface%:*}"
label="label $interface:$label"
fi
shift 2
list_search $external $(find_interface_addresses $interface) || do_one
done
}
#
# Detect the gateway through a PPP or DHCP-configured interface
#
detect_dynamic_gateway() { # $1 = interface
local interface
interface=$1
local GATEWAYS
GATEWAYS=
local gateway
local file
gateway=$(run_findgw_exit $1);
if [ -z "$gateway" ]; then
gateway=$( find_peer $($IP addr list $interface ) )
fi
file="${VARLIB}/dhcpcd/dhcpcd-${1}.info"
if [ -z "$gateway" -a -f "${file}" ]; then
eval $(grep ^GATEWAYS= "${file}" 2> /dev/null)
[ -n "$GATEWAYS" ] && GATEWAYS=${GATEWAYS%,*} && gateway=$GATEWAYS
fi
for file in \
"${VARLIB}/dhcp/dhclient-${1}.lease" \
"${VARLIB}/dhcp/dhclient.${1}.leases"
do
[ -n "$gateway" ] && break
if [ -f "${file}" ]; then
gateway=$(grep 'option routers' "${file}" | tail -n 1 | while read j1 j2 gateway; do echo "${gateway%\;}" ; return 0; done)
fi
done
[ -n "$gateway" ] && echo $gateway
}
#
# Detect the gateway through an interface
#
detect_gateway() # $1 = interface
{
local interface
interface=$1
local gateway
#
# First assume that this is some sort of dynamic interface
#
gateway=$( detect_dynamic_gateway $interface )
#
# Maybe there's a default route through this gateway already
#
[ -n "$gateway" ] || gateway=$(find_gateway $($IP -4 route list dev $interface | grep ^default))
#
# Last hope -- is there a load-balancing route through the interface?
#
[ -n "$gateway" ] || gateway=$(find_nexthop $interface)
#
# Be sure we found one
#
[ -n "$gateway" ] && echo $gateway
}
#
# Disable IPV6
#
disable_ipv6() {
local temp
temp="$($IP -f inet6 addr list 2> /dev/null)"
if [ -n "$temp" ]; then
if [ -x "$IP6TABLES" ]; then
$IP6TABLES -P FORWARD DROP
$IP6TABLES -P INPUT DROP
$IP6TABLES -P OUTPUT DROP
$IP6TABLES -F
$IP6TABLES -X
for temp in $(find_loopback_interfaces); do
$IP6TABLES -A OUTPUT -o $temp -j ACCEPT
$IP6TABLES -A INPUT -i $temp -j ACCEPT
done
else
error_message "WARNING: DISABLE_IPV6=Yes in shorewall.conf but this system does not appear to have ip6tables"
fi
fi
}
#
# Add an additional gateway to the default route
#
add_gateway() # $1 = Delta $2 = Table Number
{
local route
local weight
local delta
local dev
route=`$IP -4 -o route ls table $2 | grep ^default | sed 's/default //; s/[\]//g'`
if [ -z "$route" ]; then
run_ip route add default scope global table $2 $1
else
delta=$1
if ! echo $route | grep -qF ' nexthop '; then
if echo $route | grep -qF via; then
route=`echo $route | sed 's/via/nexthop via/'`
else
route="nexthop $route"
fi
dev=$(find_device $route)
if [ -f ${VARDIR}/${dev}_weight ]; then
weight=`cat ${VARDIR}/${dev}_weight`
route="$route weight $weight"
fi
fi
run_ip route replace default scope global table $2 $route $delta
fi
}
#
# Remove a gateway from the default route
#
delete_gateway() # $! = Description of the Gateway $2 = table number $3 = device
{
local route
local gateway
local dev
route=`$IP -4 -o route ls table $2 | grep ^default | sed 's/[\]//g'`
gateway=$1
if [ -n "$route" ]; then
if echo $route | grep -qF ' nexthop '; then
if interface_is_up $3; then
gateway="nexthop $gateway"
else
gateway="nexthop $gateway dead"
fi
if eval echo $route \| fgrep -q \'$gateway\'; then
eval route=\`echo $route \| sed \'s/$gateway/ /\'\`
run_ip route replace table $2 $route
fi
else
dev=$(find_device $route)
[ "$dev" = "$3" ] && run_ip route delete default table $2
fi
fi
}
#
# Determine the MAC address of the passed IP through the passed interface
#
find_mac() # $1 = IP address, $2 = interface
{
if interface_is_usable $2 ; then
qt ping -nc 1 -t 2 -I $2 $1
local result
result=$($IP neigh list | awk "/^$1 / {print \$5}")
case $result in
\<*\>)
;;
*)
[ -n "$result" ] && echo $result
;;
esac
fi
}
#
# Clear Proxy Arp
#
delete_proxyarp() {
if [ -f ${VARDIR}/proxyarp ]; then
while read address interface external haveroute; do
qtnoin $IP -4 neigh del proxy $address dev $external
[ -z "${haveroute}${g_noroutes}" ] && qtnoin $IP -4 route del $address/32 dev $interface
f=/proc/sys/net/ipv4/conf/$interface/proxy_arp
[ -f $f ] && echo 0 > $f
done < ${VARDIR}/proxyarp
rm -f ${VARDIR}/proxyarp
fi
}
#
# Remove all Shorewall-added rules
#
clear_firewall() {
stop_firewall
setpolicy INPUT ACCEPT
setpolicy FORWARD ACCEPT
setpolicy OUTPUT ACCEPT
run_iptables -F
qt $IPTABLES -t raw -F
echo 1 > /proc/sys/net/ipv4/ip_forward
if [ -n "$DISABLE_IPV6" ]; then
if [ -x $IP6TABLES ]; then
$IP6TABLES -P INPUT ACCEPT 2> /dev/null
$IP6TABLES -P OUTPUT ACCEPT 2> /dev/null
$IP6TABLES -P FORWARD ACCEPT 2> /dev/null
fi
fi
run_clear_exit
set_state "Cleared"
logger -p kern.info "$g_product Cleared"
}
#
# Get a list of all configured broadcast addresses on the system
#
get_all_bcasts()
{
$IP -f inet addr show 2> /dev/null | grep 'inet.*brd' | grep -v '/32 ' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
}
?else
#################################################################################
# IPv6-specific Functions
#################################################################################
#
# Determine if interface is usable from a Netfilter perspective
#
interface_is_usable() # $1 = interface
{
local status;
status=0
if [ "$1" != lo ]; then
if interface_is_up $1 && [ "$(find_first_interface_address_if_any $1)" != :: ]; then
if [ "$COMMAND" != enable ]; then
[ ! -f ${VARDIR}/${1}_disabled ] && run_isusable_exit $1
status=$?
fi
else
status=1
fi
fi
return $status
}
#
# Find interface addresses--returns the set of addresses assigned to the passed device
#
find_interface_addresses() # $1 = interface
{
$IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 2' | sed 's/\s*inet6 //;s/\/.*//;s/ peer [0-9a-f:]*//'
}
#
# Get all interface addresses with VLSMs
#
find_interface_full_addresses() # $1 = interface
{
$IP -f inet6 addr show $1 2> /dev/null | grep 'inet6 ' | sed 's/\s*inet6 //;s/ scope.*//;s/ peer [0-9a-f:]*//'
}
#
# Normalize an IPv6 Address by compressing out consecutive zero elements
#
normalize_address() # $1 = valid IPv6 Address
{
local address
address=$1
local j
while true; do
case $address in
::*)
address=0$address
;;
*::*)
list_count $(split $address)
j=$?
if [ $j -eq 7 ]; then
address=${address%::*}:0:${address#*::}
elif [ $j -eq 8 ]; then
$address=${address%::*}:${address#*::}
break 2
else
address=${address%::*}:0::${address#*::}
fi
;;
*)
echo $address
break 2
;;
esac
done
}
#
# Reads correctly-formed and fully-qualified host and subnet addresses from STDIN. For each
# that defines a /120 or larger network, it sends to STDOUT:
#
# The corresponding subnet-router anycast address (all host address bits are zero)
# The corresponding anycast addresses defined by RFC 2526 (the last 128 addresses in the subnet)
#
convert_to_anycast() {
local address
local badress
local vlsm
local host
local o
local m
m=
local z
z=65535
local l
while read address; do
case $address in
2*|3*)
vlsm=${address#*/}
vlsm=${vlsm:=128}
if [ $vlsm -le 120 ]; then
#
# Defines a viable subnet -- first get the subnet-router anycast address
#
host=$((128 - $vlsm))
address=$(normalize_address ${address%/*})
while [ $host -ge 16 ]; do
address=${address%:*}
host=$(($host - 16))
done
if [ $host -gt 0 ]; then
#
# VLSM is not a multiple of 16
#
host=$((16 - $host))
o=$((0x${address##*:}))
m=0
while [ $host -gt 0 ]; do
m=$((($m >> 1) | 0x8000))
z=$(($z >> 1))
host=$(($host - 1))
done
o=$(($o & $m))
badress=${address%:*}
address=$badress:$(printf %04x $o)
z=$(($o | $z))
if [ $vlsm -gt 112 ]; then
z=$(($z & 0xff80))
fi
badress=$badress:$(printf %04x $z)
else
badress=$address
fi
#
# Note: at this point $address and $badress are the same except possibly for
# the contents of the last half-word
#
list_count $(split $address)
l=$?
#
# Now generate the anycast addresses defined by RFC 2526
#
if [ $l -lt 8 ]; then
#
# The subnet-router address
#
echo $address::
while [ $l -lt 8 ]; do
badress=$badress:ffff
l=$(($l + 1 ))
done
else
#
# The subnet-router address
#
echo $address
fi
#
# And the RFC 2526 addresses
#
echo $badress/121
fi
;;
esac
done
}
#
# Generate a list of anycast addresses for a given interface
#
get_interface_acasts() # $1 = interface
{
local addresses
addresses=
find_interface_full_addresses $1 | convert_to_anycast | sort -u
}
#
# Get a list of all configured anycast addresses on the system
#
get_all_acasts()
{
find_interface_full_addresses | convert_to_anycast | sort -u
}
#
# Detect the gateway through an interface
#
detect_gateway() # $1 = interface
{
local interface
interface=$1
#
# First assume that this is some sort of point-to-point interface
#
gateway=$( find_peer $($IP -6 addr list $interface ) )
#
# Maybe there's a default route through this gateway already
#
[ -n "$gateway" ] || gateway=$(find_gateway $($IP -6 route list dev $interface | grep '^default'))
#
# Last hope -- is there a load-balancing route through the interface?
#
[ -n "$gateway" ] || gateway=$(find_nexthop $interface)
#
# Be sure we found one
#
[ -n "$gateway" ] && echo $gateway
}
#
# Add an additional gateway to the default route
#
add_gateway() # $1 = Delta $2 = Table Number
{
local route
local weight
local delta
local dev
run_ip route add default scope global table $2 $1
}
#
# Remove a gateway from the default route
#
delete_gateway() # $! = Description of the Gateway $2 = table number $3 = device
{
local route
local gateway
local dev
route=`$IP -6 -o route ls table $2 | grep ^default | sed 's/[\]//g'`
gateway=$1
dev=$(find_device $route)
[ "$dev" = "$3" ] && run_ip route delete default table $2
}
#
# Clear Proxy NDP
#
delete_proxyndp() {
if [ -f ${VARDIR}/proxyndp ]; then
while read address interface external haveroute; do
qt $IP -6 neigh del proxy $address dev $external
[ -z "${haveroute}${g_noroutes}" ] && qt $IP -6 route del $address/128 dev $interface
f=/proc/sys/net/ipv6/conf/$interface/proxy_ndp
[ -f $f ] && echo 0 > $f
done < ${VARDIR}/proxyndp
rm -f ${VARDIR}/proxyndp
fi
}
#
# Remove all Shorewall-added rules
#
clear_firewall() {
stop_firewall
setpolicy INPUT ACCEPT
setpolicy FORWARD ACCEPT
setpolicy OUTPUT ACCEPT
run_iptables -F
qt $IP6TABLES -t raw -F
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
run_clear_exit
set_state "Cleared"
logger -p kern.info "$g_product Cleared"
}
?endif # IPv6-specific functions.