shorewall_code/Shorewall-common/lib.cli

#!/bin/sh
#
# Shorewall 4.2 -- /usr/share/shorewall/lib.cli.
#
#     This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
#     (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007 - Tom Eastep (teastep@shorewall.net)
#
#	Complete documentation is available at http://shorewall.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# This library contains the command processing code common to /sbin/shorewall and
# /sbin/shorewall-lite.
#

#
# Fatal Error
#
fatal_error() # $@ = Message
{
    echo "   $@" >&2
    exit 2
}

# Display a chain if it exists
#

showfirstchain() # $1 = name of chain
{
    awk \
    'BEGIN	 {prnt=0; rslt=1; }; \
    /^$/	 { next; };\
    /^Chain/	 {if ( prnt == 1 ) { rslt=0; exit 0; }; };\
    /Chain '$1'/ { prnt=1; }; \
		 { if (prnt == 1)  print; };\
    END		 { exit rslt; }' $TMPFILE
}

showchain() # $1 = name of chain
{
    if [ "$firstchain" = "Yes" ]; then
	if showfirstchain $1; then
	    firstchain=
	fi
    else
	awk \
	'BEGIN	     {prnt=0;};\
	/^$|^ pkts/  { next; };\
	/^Chain/     {if ( prnt == 1 ) exit; };\
	/Chain '$1'/ { prnt=1; };\
		     { if (prnt == 1)  print; }' $TMPFILE
    fi
}

#
# The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules).
#

iptablesbug()
{
    if qt mywhich awk ; then
	awk 'BEGIN           { sline=""; };\
             /^-j/           { print sline $0; next };\
             /-m policy.*-j/ { print $0; next };\
             /-m policy/     { sline=$0; next };\
             /--mask ff/     { sub( /--mask ff/, "--mask 0xff" ) };\
                             { print ; sline="" }'
    else
	echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
	cat
    fi
}

#
# Validate the value of RESTOREFILE
#
validate_restorefile() # $* = label
{
    case $RESTOREFILE in
	*/*)
	    error_message "ERROR: $@ must specify a simple file name: $RESTOREFILE"
	    exit 2
	    ;;
	.safe|.try)
	    ;;
	.*|NONE)
	    error_message "ERROR: Reserved File Name: $RESTOREFILE"
	    exit 2
	    ;;
    esac
}

#
# Clear descriptor 1 if it is a terminal
#
clear_term() {
    [ -t 1 ] && clear
}

#
# Delay $timeout seconds -- if we're running on a recent bash2 then allow
# <enter> to terminate the delay
#
timed_read ()
{
    read -t $timeout foo 2> /dev/null

    test $? -eq 2 && sleep $timeout
}

#
# Determine if 'syslog -C' is running
#
syslog_circular_buffer() {
    local pid
    local tty
    local flags
    local cputime
    local path
    local args
    local arg

    ps ax 2> /dev/null | while read pid tty flags cputime path args; do
	case $path in
	    syslogd|*/syslogd)
		for arg in $args; do
		    if [ x$arg = x-C ]; then
			echo Yes
			return
		    fi
		done
		;;
	esac
    done
}

#
# Display the last $1 packets logged
#
packet_log() # $1 = number of messages
{
    local options

    if [ -n "$SHOWMACS" -o $VERBOSE -gt 2 ]; then
	$LOGREAD | grep 'IN=.* OUT=' | head -n$1 | tac | sed 's/ kernel://; s/\[.*\] //' | sed s/" $host $LOGFORMAT"/" "/
    else
	$LOGREAD | grep 'IN=.* OUT=' |  head -n$1 | tac | sed 's/ kernel://; s/MAC=.* SRC=/SRC=/; s/\[.*\] '// | sed s/" $host $LOGFORMAT"/" "/
    fi
}

#
# Show traffic control information
#
show_tc() {

    show_one_tc() {
	local device
	device=${1%@*}
	qdisc=$(tc qdisc list dev $device)

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s -d qdisc show dev $device
	    echo
	    tc -s -d class show dev $device
	    echo
	fi
    }

    ip -o link list | while read inx interface details; do
	show_one_tc ${interface%:}
    done

}

#
# Show classifier information
#
show_classifiers() {

    show_one_classifier() {
	local device
	device=${1%@*}
	qdisc=$(tc qdisc list dev $device)

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s filter ls dev $device
	    echo
	fi
    }

    ip -o link list | while read inx interface details; do
	show_one_classifier ${interface%:}
    done

}

#
# Watch the Firewall Log
#
logwatch() # $1 = timeout -- if negative, prompt each time that
	   #		     an 'interesting' packet count changes
{

    host=$(echo $HOSTNAME | sed 's/\..*$//')
    oldrejects=$($IPTABLES -L -v -n | grep 'LOG')

    if [ $1 -lt 0 ]; then
	timeout=$((- $1))
	pause="Yes"
    else
	pause="No"
	timeout=$1
    fi

    qt mywhich awk && haveawk=Yes || haveawk=

    while true; do
	clear_term
	echo "$banner $(date)"
	echo

	echo "Dropped/Rejected Packet Log ($LOGFILE)"
	echo

	show_reset

	rejects=$($IPTABLES -L -v -n | grep 'LOG')

	if [ "$rejects" != "$oldrejects" ]; then
	    oldrejects="$rejects"

	    $RING_BELL

	    packet_log 40

	    if [ "$pause" = "Yes" ]; then
		echo
		echo $ECHO_N 'Enter any character to continue: '
		read foo
	    else
		timed_read
	    fi
	else
	    echo
	    packet_log 40
	    timed_read
	fi
    done
}

#
# Save currently running configuration
#
save_config() {

    local result
    result=1
    
    iptables_save=${IPTABLES}-save

    [ -x $iptables_save ] || echo "$iptables-save does not exist or is not executable" >&2

    if shorewall_is_started ; then
	[ -d ${VARDIR} ] || mkdir -p ${VARDIR}

	if [ -f $RESTOREPATH -a ! -x $RESTOREPATH ]; then
	    echo "   ERROR: $RESTOREPATH exists and is not a saved $PRODUCT configuration" >&2
	else
	    case $RESTOREFILE in
		capabilities|chains|default_route|firewall|firewall.conf|nat|proxyarp|restarted|rt_tables|save|state|undo_routing|zones)
		    echo "   ERROR: Reserved file name: $RESTOREFILE" >&2
		    ;;
		*)
		    validate_restorefile RESTOREFILE

		    if $IPTABLES -L dynamic -n > ${VARDIR}/save; then
			echo "   Dynamic Rules Saved"
			if [ -f ${VARDIR}/.restore ]; then
			    if $iptables_save | iptablesbug > ${VARDIR}/restore-$$; then
				cp -f ${VARDIR}/.restore $RESTOREPATH
				mv -f ${VARDIR}/restore-$$ ${RESTOREPATH}-iptables
				chmod +x $RESTOREPATH
				echo "   Currently-running Configuration Saved to $RESTOREPATH"

				rm -f ${RESTOREPATH}-ipsets

				case ${SAVE_IPSETS:-No} in
				    [Yy][Ee][Ss])
					RESTOREPATH=${RESTOREPATH}-ipsets

					f=${VARDIR}/restore-$$

					echo "#!/bin/sh" > $f
					echo "#This ipset restore file generated $(date) by Shorewall $version" >> $f
					echo  >> $f
					echo ". ${SHAREDIR}/lib.base" >> $f
					echo  >> $f
					cat ${VARDIR}/.modulesdir >> $f
					echo  >> $f
					echo "reload_kernel_modules << __EOF__" >> $f
					grep 'loadmodule ip_set' ${VARDIR}/.modules >> $f
					echo "__EOF__" >> $f
					echo  >> $f
					echo "ipset -U :all: :all:" >> $f
					echo "ipset -U :all: :default:" >> $f
					echo "ipset -F" >> $f
					echo "ipset -X" >> $f
					echo "ipset -R << __EOF__" >> $f
					ipset -S >> $f
					echo "__EOF__" >> $f
					mv -f $f $RESTOREPATH
					chmod +x $RESTOREPATH
					echo "   Current Ipset Contents Saved to $RESTOREPATH"
					result=0
					;;
				    [Nn][Oo])
					;;
				    *)
					echo "   WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS. Ipset contents not saved" >&2
					;;
				esac

				run_user_exit save
			    else
			        rm -f ${VARDIR}/restore-$$
				echo "   ERROR: Currently-running Configuration Not Saved" >&2
			    fi
			else
			    echo "   ERROR: ${VARDIR}/.restore does not exist" >&2
			fi
		    else
		        echo "Error Saving the Dynamic Rules" >&2
		    fi
		    ;;
	    esac
	fi
    else
	echo "Shorewall isn't started" >&2
    fi

    return 0

}

#
# Show routing configuration
#
show_routing() {
    if [ -n "$(ip rule list)" ]; then
	heading "Routing Rules"
	ip rule list
	ip rule list | while read rule; do
	    echo ${rule##* }
	done | sort -u | while read table; do
	    heading "Table $table:"
	    ip route list table $table
	done
    else
	heading "Routing Table"
	ip route list
    fi
}

#
# Show Command Executor
#
show_command() {
    local finished
    finished=0
    local table
    table=filter
    local table_given
    table_given=

    show_macro() {
	foo=`grep 'This macro' $macro | sed 's/This macro //'`
	if [ -n "$foo" ]; then
	    macro=${macro#*.}
	    foo=${foo%.*}
	    if [ ${#macro} -gt 10 ]; then
		echo "   $macro  ${foo#\#}"
	    else
		$ECHO_E "   $macro  \t${foo#\#}"
	    fi
	fi
    }

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			x*)
			    IPT_OPTIONS="-xnv"
			    option=${option#x}
			    ;;
			m*)
			    SHOWMACS=Yes
			    option=${option#m}
			    ;;
			f*)
			    FILEMODE=Yes
			    option=${option#f}
			    ;;
			t)
			    [ $# -eq 1 ] && usage 1

			    case $2 in
				mangle|nat|filter|raw)
				    table=$2
				    table_given=Yes
				    ;;
				*)
				    fatal_error "Invalid table name ($s)"
				    ;;
			    esac
			    
			    option=
			    shift
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ -n "$debugging" ] && set -x
    case "$1" in
	connections)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version Connections at $HOSTNAME - $(date)"
	    echo
	    [ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || cat /proc/net/nf_conntrack
	    ;;
	nat)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version NAT Table at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    $IPTABLES -t nat -L $IPT_OPTIONS
	    ;;
	tos|mangle)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version Mangle Table at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    $IPTABLES -t mangle -L $IPT_OPTIONS
	    ;;
	log)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version Log ($LOGFILE) at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    host=$(echo $HOSTNAME | sed 's/\..*$//')
	    packet_log 20
	    ;;
	tc)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version Traffic Control at $HOSTNAME - $(date)"
	    echo
	    show_tc
	    ;;
	classifiers|filters)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version Classifiers at $HOSTNAME - $(date)"
	    echo
	    show_classifiers
	    ;;
	zones)
	    [ $# -gt 1 ] && usage 1
	    if [ -f ${VARDIR}/zones ]; then
		echo "$PRODUCT $version Zones at $HOSTNAME - $(date)"
		echo
		while read zone type hosts; do
		    echo "$zone ($type)"
		    for host in $hosts; do
			case $host in
			    exclude)
				echo "  exclude:"
				;;
			    *)
				echo "   $host"
				;;
			esac
		    done
		done < ${VARDIR}/zones
		echo
	    else
		echo "   ERROR: ${VARDIR}/zones does not exist" >&2
		exit 1
	    fi
	    ;;
	capabilities)
	    [ $# -gt 1 ] && usage 1
	    determine_capabilities
	    VERBOSE=2
	    if [ -n "$FILEMODE" ]; then
		report_capabilities1
	    else
		report_capabilities
	    fi
	    ;;
	ip)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version IP at $HOSTNAME - $(date)"
	    echo
	    ip -4 addr list
	    ;;
	routing)
	    [ $# -gt 1 ] && usage 1
	    echo "$PRODUCT $version Routing at $HOSTNAME - $(date)"
	    echo
	    show_routing
	    ;;
	config)
	    . ${SHAREDIR}/configpath
	    echo "Default CONFIG_PATH is $CONFIG_PATH"
	    [ -n "$LITEDIR" ] && echo "LITEDIR is $LITEDIR"
	    ;;
	chain)
	    shift
	    echo "$PRODUCT $version $([ $# -gt 1 ] && echo "Chains " || [ $# -gt 0 ] && echo "Chain " || echo $table Table)$* at $HOSTNAME - $(date)"
	    echo
	    show_reset
	    if [ $# -gt 0 ]; then
		for chain in $*; do
		    $IPTABLES -t $table -L $chain $IPT_OPTIONS
		done
	    else
		$IPTABLES -t $table -L $IPT_OPTIONS
	    fi
	    ;;
	vardir)
	    echo $VARDIR;
	    ;;
	*)
	    if [ "$PRODUCT" = Shorewall ]; then
		case $1 in
		    actions)
			[ $# -gt 1 ] && usage 1
			echo "allowBcast          # Silently Allow Broadcast/multicast"
			echo "allowInvalid        # Accept packets that are in the INVALID conntrack state."
			echo "allowinUPnP         # Allow UPnP inbound (to firewall) traffic"
			echo "allowoutUPnP        # Allow traffic from local command 'upnpd' (does not work with kernels after 2.6.13)"
			echo "dropBcast           # Silently Drop Broadcast/multicast"
			echo "dropInvalid         # Silently Drop packets that are in the INVALID conntrack state"
			echo "dropNotSyn          # Silently Drop Non-syn TCP packets"
			echo "drop1918src         # Drop packets with an RFC 1918 source address (Shorewall-perl only)"
			echo "drop1918dst         # Drop packets with an RFC 1918 original dest address (Shorewall-perl only)"
			echo "forwardUPnP         # Allow traffic that upnpd has redirected from"
			echo "rejNotSyn           # Silently Reject Non-syn TCP packets"
			echo "rej1918src          # Reject packets with an RFC 1918 source address (Shorewall-perl only)"
			echo "rej1918dst          # Reject packets with an RFC 1918 original dest address (Shorewall-perl only)"

			if [ -f ${CONFDIR}/actions ]; then
			    cat ${SHAREDIR}/actions.std ${CONFDIR}/actions | grep -Ev '^\#|^$'
			else
			    grep -Ev '^\#|^$' ${SHAREDIR}/actions.std
			fi

			return
			;;
		    macros)
			[ $# -gt 1 ] && usage 1

			for directory in $(split $CONFIG_PATH); do
			    temp=
			    for macro in ${directory}/macro.*; do
				case $macro in
				    *\*)
                                        ;;
				    *)
				        if [ -z "$temp" ]; then
					    echo
					    echo "Macros in $directory:"
					    echo
					    temp=Yes
					fi
					show_macro
					;;
				esac
			    done
			done
			return
			;;
		esac
	    fi

	    if [ $# -gt 0 ]; then
		[ -n "$table_given" ] || for chain in $*; do
		    if ! qt $IPTABLES -t $table -L $chain $IPT_OPTIONS; then
			echo "usage $(basename $0) show [ -x ] [ -m ] [-f] [ -t {filter|mangle|nat} ] [ {chain [<chain> [ <chain> ... ]|actions|capabilities|classifiers|config|connections|filters|ip|log|macros|mangle|nat|routing|tc|zones} ] " >&2
			exit 1
		    fi
		done
		
		echo "$PRODUCT $version $([ $# -gt 1 ] && echo "Chains " || echo "Chain ")$* at $HOSTNAME - $(date)"
		echo
		show_reset
		for chain in $*; do
		    $IPTABLES -t $table -L $chain $IPT_OPTIONS
		done
	    else
		echo "$PRODUCT $version $table Table at $HOSTNAME - $(date)"
		echo
		show_reset
		$IPTABLES -t $table -L $IPT_OPTIONS
	    fi
	    ;;
    esac
}

#
# Dump Command Executor
#
dump_command() {
    local finished
    finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			x*)
			    IPT_OPTIONS="-xnv"
			    option=${option#x}
			    ;;
			m*)
			    SHOWMACS=Yes
			    option=${option#m}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ $VERBOSE -lt 2 ] && VERBOSE=2

    [ -n "$debugging" ] && set -x
    [ $# -eq 0 ] || usage 1
    clear_term
    echo "$PRODUCT $version Dump at $HOSTNAME - $(date)"
    echo
    if [ -f /usr/share/shorewall-shell/version ]; then
	echo "   Shorewall-shell $(cat /usr/share/shorewall-shell/version)"
	if [ -f /usr/share/shorewall-perl/version ]; then
	    echo "   Shorewall-perl  $(cat /usr/share/shorewall-perl/version)"
	fi
	echo 
    elif [ -f /usr/share/shorewall-perl/version ]; then
	echo "   Shorewall-perl $(cat /usr/share/shorewall-perl/version)"
	echo
    fi
    
    show_reset
    host=$(echo $HOSTNAME | sed 's/\..*$//')
    $IPTABLES -L $IPT_OPTIONS

    heading "Log ($LOGFILE)"
    packet_log 20

    heading "NAT Table"
    $IPTABLES -t nat -L $IPT_OPTIONS

    heading "Mangle Table"
    $IPTABLES -t mangle -L $IPT_OPTIONS

    heading "Conntrack Table"
    [ -f /proc/net/ip_conntrack ] && cat /proc/net/ip_conntrack || cat /proc/net/nf_conntrack

    heading "IP Configuration"
    ip -4 addr list

    heading "IP Stats"
    ip -stat link list

    if qt mywhich brctl; then
	heading "Bridges"
	brctl show
    fi

    if qt mywhich setkey; then
	heading "PFKEY SPD"
	setkey -DP
	heading "PFKEY SAD"
	setkey -D | grep -Ev '^[[:space:]](A:|E:)'  # Don't divulge the keys 
    fi

    heading "/proc"
    show_proc /proc/version
    show_proc /proc/sys/net/ipv4/ip_forward
    show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all

    for directory in /proc/sys/net/ipv4/conf/*; do
	for file in proxy_arp arp_filter arp_ignore rp_filter log_martians; do
	    show_proc $directory/$file
	done
    done

    show_routing

    heading "ARP"
    arp -na

    if qt mywhich lsmod; then
	heading "Modules"
	lsmod | grep -E '^(ip_|ipt_|iptable_|nf_|xt_)' | sort
    fi

    determine_capabilities
    echo
    report_capabilities

    if [ -n "$TC_ENABLED" ]; then
	heading "Traffic Control"
	show_tc
	heading "TC Filters"
	show_classifiers
	fi
}

#
# Restore Comand Executor
#
restore_command() {
    local finished
    finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
    0)
	;;
    1)
	RESTOREFILE="$1"
	validate_restorefile '<restore file>'
	;;
    *)
	usage 1
	;;
    esac

    if [ -z "$STARTUP_ENABLED" ]; then
	error_message "ERROR: Startup is disabled"
	exit 2
    fi

    RESTOREPATH=${VARDIR}/$RESTOREFILE

    export NOROUTES

    [ -n "$nolock" ] || mutex_on

    if [ -x $RESTOREPATH ]; then
	if [ -x ${RESTOREPATH}-ipsets ] ; then
	    echo Restoring Ipsets...
	    iptables -F
	    iptables -X
	    $SHOREWALL_SHELL ${RESTOREPATH}-ipsets
	fi

	progress_message3 "Restoring Shorewall..."

	$SHOREWALL_SHELL $RESTOREPATH restore && progress_message3 "$PRODUCT restored from ${VARDIR}/$RESTOREFILE"

	[ -n "$nolock" ] || mutex_off
    else
	echo "File $RESTOREPATH: file not found"
	[ -n "$nolock" ] || mutex_off
	exit 2
    fi
}

#
# Display the time that the counters were last reset
#
show_reset() {
    [ -f ${VARDIR}/restarted ] && \
	echo "Counters reset $(cat ${VARDIR}/restarted)" && \
	echo
}

#
# Display's the passed file name followed by "=" and the file's contents.
#
show_proc() # $1 = name of a file
{
    [ -f $1 ] && echo "   $1 = $(cat $1)"
}

read_yesno_with_timeout() {
    read -t 60 yn 2> /dev/null
    if [ $? -eq 2 ]
    then
	# read doesn't support timeout
	test -x /bin/bash || return 2 # bash is not installed so the feature is not available
	/bin/bash -c 'read -t 60 yn ; if [ "$yn" == "y" ] ; then exit 0 ; else exit 1 ; fi' # invoke bash and use its version of read
	return $?
    else
	# read supports timeout
	case "$yn" in
	    y|Y)
		return 0
		;;
	    *)
		return 1
		;;
	esac
    fi
}

#
# Print a heading with leading and trailing black lines
#
heading() {
    echo
    echo "$@"
    echo
}

#
# Create the appropriate -q option to pass onward
#
make_verbose() {
    local v
    v=$VERBOSE_OFFSET
    local option
    option=-

    if [ -n "$USE_VERBOSITY" ]; then
	echo "-v$USE_VERBOSITY"
    elif [ $VERBOSE_OFFSET -gt 0 ]; then
	while [ $v -gt 0 ]; do
	    option="${option}v"
	    v=$(($v - 1))
	done

	echo $option
    elif [ $VERBOSE_OFFSET -lt 0 ]; then
	while [ $v -lt 0 ]; do
	    option="${option}q"
	    v=$(($v + 1))
	done

	echo $option
    fi
}

#
# Executor for drop,reject,... commands
#
block() # $1 = command, $2 = Finished, $3 - $n addresses
{
    local chain
    chain=$1
    local finished
    finished=$2

    shift 3

    while [ $# -gt 0 ]; do
	case $1 in
	    *-*)
		qt $IPTABLES -D dynamic -m iprange --src-range $1 -j reject
		qt $IPTABLES -D dynamic -m iprange --src-range  $1 -j DROP
		qt $IPTABLES -D dynamic -m iprange --src-range $1 -j logreject
		qt $IPTABLES -D dynamic -m iprange --src-range $1 -j logdrop
		$IPTABLES -A dynamic -m iprange --src-range $1 -j $chain || break 1
		;;
	    *)
		qt $IPTABLES -D dynamic -s $1 -j reject
		qt $IPTABLES -D dynamic -s $1 -j DROP
		qt $IPTABLES -D dynamic -s $1 -j logreject
		qt $IPTABLES -D dynamic -s $1 -j logdrop
		$IPTABLES -A dynamic -s $1 -j $chain || break 1
		;;
	esac

	echo "$1 $finished"
	shift
    done
}

#
# 'hits' commmand executor
#
hits_command() {
    local finished
    finished=0
    local today
    today=

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			t*)
			    today=$(date +'^%b %_d.*')
			    option=${option#t}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ $# -eq 0 ] || usage 1

    clear_term
    echo "$PRODUCT $version Hits at $HOSTNAME - $(date)"
    echo

    timeout=30

    if $LOGREAD | grep -q "${today}IN=.* OUT=" ; then
	echo "   HITS IP	        DATE"
	echo "   ---- --------------- ------"
	$LOGREAD | grep "${today}IN=.* OUT=" | sed 's/\(.\{6\}\)\(.*SRC=\)\(.*\)\( DST=.*\)/\3	\1/' | sort | uniq -c | sort -rn | while read count address month day; do
	    printf '%7d %-15s %3s %2d\n' $count $address $month $day
	done

	echo ""

	echo "   HITS IP	        PORT"
	echo "   ---- --------------- -----"
	$LOGREAD | grep  "${today}IN=.* OUT=" | sed 's/\(.*SRC=\)\(.*\)\( DST=.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2	\4/
						t
						s/\(.*SRC=\)\(.*\)\( DST=.*\)/\2/' | sort | uniq -c | sort -rn | while read count address port; do
	    printf '%7d %-15s %d\n' $count $address $port
	done

	echo ""

	echo "   HITS DATE"
	echo "   ---- ------"
	$LOGREAD | grep  "${today}IN=.* OUT=" | sed 's/\(.\{6\}\)\(.*\)/\1/' | sort | uniq -c | sort -rn | while read count month day; do
	    printf '%7d %3s %2d\n' $count $month $day
	done

	echo ""

	echo "   HITS  PORT SERVICE(S)"
	echo "   ---- ----- ----------"
	$LOGREAD | grep "${today}IN=.* OUT=.*DPT" | sed 's/\(.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2/' | sort | uniq -c | sort -rn | while read count port ; do
	    # List all services defined for the given port
	    srv=$(grep "^[^#].*\\b$port/" /etc/services | cut -f 1 | cut -f 1 -d' ' | sort -u)
	    srv=$(echo $srv | sed 's/ /,/g')

	    if [ -n "$srv" ] ; then
		printf '%7d %5d %s\n' $count $port $srv
	    else
		printf '%7d %5d\n' $count $port
	    fi
	done
    fi
}

#
# 'allow' command executor
#
allow_command() {
    [ -n "$debugging" ] && set -x
    [ $# -eq 1 ] && usage 1
    if shorewall_is_started ; then
	[ -n "$nolock" ] || mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    case $1 in
		*-*)
		    if  qt $IPTABLES -D dynamic -m iprange --src-range $1 -j reject    ||\
			qt $IPTABLES -D dynamic -m iprange --src-range $1 -j DROP      ||\
			qt $IPTABLES -D dynamic -m iprange --src-range $1 -j logdrop   ||\
			qt $IPTABLES -D dynamic -m iprange --src-range $1 -j logreject
			then
			echo "$1 Allowed"
		    else
			echo "$1 Not Dropped or Rejected"
		    fi
		    ;;
		*)
		    if  qt $IPTABLES -D dynamic -s $1 -j reject    ||\
			qt $IPTABLES -D dynamic -s $1 -j DROP      ||\
			qt $IPTABLES -D dynamic -s $1 -j logdrop   ||\
			qt $IPTABLES -D dynamic -s $1 -j logreject
			then
			echo "$1 Allowed"
		    else
			echo "$1 Not Dropped or Rejected"
		    fi
		    ;;
	    esac
	done
	[ -n "$nolock" ] || mutex_off
    else
	error_message "ERROR: $PRODUCT is not started"
	exit 2
    fi
}

#
# 'logwatch' command executor
#
logwatch_command() {
    shift

    finished=0

    while [ $finished -eq 0 -a $# -ne 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}
		
		[ -z "$option" ] && usage 1
		
		while [ -n "$option" ]; do
		    case $option in
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE - 1 ))
			    option=${option#q}
			    ;;
			m*)
			    SHOWMACS=Yes
			    option=${option#m}
			    ;;
			-)
			    finished=1
			    option=
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done
    
    [ -n "$debugging" ] && set -x

    if [ $# -eq 1 ]; then
	logwatch $1
    elif [ $# -eq 0 ]; then
	logwatch 30
    else
	usage 1
    fi
}