shorewall_code/Shorewall-docsN/CorpNetwork.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Corporate Network</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>

      <author>
        <firstname>Graeme</firstname>

        <surname>Boyle</surname>
      </author>
    </authorgroup>

    <pubdate>2003-11-13</pubdate>

    <copyright>
      <year>2003 Thomas M. Eastep and Graeme Boyle</year>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <section>
    <title>The Network</title>

    <note>
      <itemizedlist>
        <listitem>
          <para>This configuration is used on a corporate network that has a
          Linux (RedHat 8.0) server with three interfaces, running Shorewall
          1.4.5 release,</para>
        </listitem>

        <listitem>
          <para>Make sure you know what public IP addresses are currently
          being used and verify these <emphasis>before</emphasis> starting.</para>
        </listitem>

        <listitem>
          <para>Verify your DNS settings <emphasis>before</emphasis> starting
          any Shorewall configuration especially if you have split DNS.</para>
        </listitem>

        <listitem>
          <para>System names and Internet IP addresses have been changed to
          protect the innocent.</para>
        </listitem>
      </itemizedlist>
    </note>

    <warning>
      <para>This configuration uses a combination of One-to-one NAT and Proxy
      ARP. This is generally not relevant to a simple configuration with a
      single public IP address. If you have just a single public IP address,
      most of what you see here won&#39;t apply to your setup so beware of
      copying parts of this configuration and expecting them to work for you.
      What you copy may or may not work in your configuration.</para>
    </warning>

    <para>I have a T1 with 64 static IP addresses (192.0.18.65-127/26). The
    internet is connected to eth0. The local network is connected via eth1
    (10.10.0.0/22) and the DMZ is connected to eth2 (192.168.21.0/24). I have
    an IPSec tunnel connecting our offices in Germany to our offices in the
    US. I host two Microsoft Exchange servers for two different companies
    behind the firewall hence, the two Exchange servers in the diagram below.</para>

    <section>
      <title>Summary</title>

      <itemizedlist>
        <listitem>
          <para>SNAT for all systems connected to the LAN - Internal addresses
          10.10.x.x to external address 192.0.18.127.</para>
        </listitem>

        <listitem>
          <para>One-to-one NAT for <emphasis>Polaris</emphasis> (Exchange
          Server #2). Internal address 10.10.1.8 and external address
          192.0.18.70.</para>
        </listitem>

        <listitem>
          <para>One-to-one NAT for <emphasis>Sims</emphasis> (Inventory
          Management server). Internal address 10.10.1.56 and external address
          192.0.18.75.</para>
        </listitem>

        <listitem>
          <para>One-to-one NAT for <emphasis>Project</emphasis> (Project Web
          Server). Internal address 10.10.1.55 and external address
          192.0.18.84.</para>
        </listitem>

        <listitem>
          <para>One-to-one NAT for <emphasis>Fortress</emphasis> (Exchange
          Server). Internal address 10.10.1.252 and external address
          192.0.18.93.</para>
        </listitem>

        <listitem>
          <para>One-to-one NAT for <emphasis>BBSRV</emphasis> (Blackberry
          Server). Internal address 10.10.1.230 and external address
          192.0.18.97.</para>
        </listitem>

        <listitem>
          <para>One-to-one NAT for <emphasis>Intweb</emphasis> (Intranet Web
          Server). Internal address 10.10.1.60 and external address
          192.0.18.115.</para>
        </listitem>
      </itemizedlist>

      <para>The firewall runs on a 2Gb, Dual PIV/2.8GHz, Intel motherboard
      with RH8.0.</para>

      <para>The Firewall is also a proxy server running Privoxy 3.0.</para>

      <para>The single system in the DMZ (address 192.0.18.80) runs sendmail,
      imap, pop3, DNS, a Web server (Apache) and an FTP server (vsFTPd 1.1.0).
      That server is managed through Proxy ARP.</para>

      <para>All administration and publishing is done using ssh/scp. I have X
      installed on the firewall and the system in the DMZ. X applications
      tunnel through SSH to Hummingbird Exceed running on a PC located in the
      LAN. Access to the firewall using SSH is restricted to systems in the
      LAN, DMZ or the system Kaos which is on the Internet and managed by me.</para>

      <graphic fileref="images/CorpNetwork.gif" />

      <para>The Ethernet 0 interface in the Server is configured with IP
      address 192.0.18.68, netmask 255.255.255.192. The server&#39;s default
      gateway is 192.0.18.65, the Router connected to my network and the ISP.
      This is the same default gateway used by the firewall itself. On the
      firewall, Shorewall automatically adds a host route to 192.0.18.80
      through Ethernet 2 (192.168.21.1) because of the entry in
      /etc/shorewall/proxyarp (see below). I modified the start, stop and init
      scripts to include the fixes suggested when having an IPSec tunnel.</para>
    </section>

    <section>
      <title>Some Mistakes I Made</title>

      <para>Yes, believe it or not, I made some really basic mistakes when
      building this firewall. Firstly, I had the new firewall setup in
      parallel with the old firewall so that there was no interruption of
      service to my users. During my out-bound testing, I set up systems on
      the LAN to utilize the firewall which worked fine. When testing my NAT
      connections, from the outside, these would fail and I could not
      understand why. Eventually, I changed the default route on the internal
      system I was trying to access, to point to the new firewall and
      <quote>bingo</quote>, everything worked as expected. This oversight
      delayed my deployment by a couple of days not to mention level of
      frustration it produced.</para>

      <para>Another problem that I encountered was in setting up the Proxyarp
      system in the DMZ. Initially I forgot to remove the entry for the eth2
      from the /etc/shorewall/masq file. Once my file settings were correct, I
      started verifying that the ARP caches on the firewall, as well as the
      outside system <quote>kaos</quote>, were showing the correct Ethernet
      MAC address. However, in testing remote access, I could access the
      system in the DMZ only from the firewall and LAN but not from the
      Internet. The message I received was <quote>connection denied</quote> on
      all protocols. What I did not realize was that a <quote>helpful</quote>
      administrator that had turned on an old system and assigned the same
      address as the one I was using for Proxyarp without notifying me. How
      did I work this out. I shutdown the system in the DMZ, rebooted the
      router and flushed the ARP cache on the firewall and kaos. Then, from
      kaos, I started pinging that IP address and checked the updated ARP
      cache and lo-and-behold a different MAC address showed up. High levels
      of frustration etc., etc. The administrator will not be doing that
      again! :-)</para>
    </section>

    <section>
      <title>Lessons Learned</title>

      <itemizedlist>
        <listitem>
          <para>Read the documentation.</para>
        </listitem>

        <listitem>
          <para>Draw your network topology before starting.</para>
        </listitem>

        <listitem>
          <para>Understand what services you are going to allow in and out of
          the firewall, whether they are TCP or UDP packets and make a note of
          these port numbers.</para>
        </listitem>

        <listitem>
          <para>Try to get quiet time to build the firewall - you need to
          focus on the job at hand.</para>
        </listitem>

        <listitem>
          <para>When asking for assistance, be honest and include as much
          detail as requested. Don&#39;t try and hide IP addresses etc., you
          will probably screw up the logs and make receiving assistance
          harder.</para>
        </listitem>

        <listitem>
          <para>Read the documentation.</para>
        </listitem>
      </itemizedlist>
    </section>

    <section>
      <title>Futures</title>

      <para>This is by no means the final configuration. In the near future, I
      will be moving more systems from the LAN to the DMZ. I will also be
      watching the logs for port scan programs etc. but, this should be
      standard security maintenance.</para>
    </section>
  </section>

  <section>
    <title>Configuation Files</title>

    <para>Here are copies of my files. I have removed most of the internal
    documentation for the purpose of this space however, my system still has
    the original files with all the comments and I highly recommend you do the
    same.</para>

    <section>
      <title>Shorewall.conf</title>

      <programlisting>##############################################################################
# /etc/shorewall/shorewall.conf V1.4 - Change the following variables to
# match your setup
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# This file should be placed in /etc/shorewall
#
# (c) 1999,2000,2001,2002,2003 - Tom Eastep (teastep@shorewall.net)
##############################################################################
# L O G G I N G
##############################################################################
LOGFILE=/var/log/messages
LOGFORMAT=<quote>Shorewall:%s:%s:</quote>
LOGRATE=
LOGBURST=
LOGUNCLEAN=info
BLACKLIST_LOGLEVEL=
LOGNEWNOTSYN=
MACLIST_LOG_LEVEL=info
TCP_FLAGS_LOG_LEVEL=debug
RFC1918_LOG_LEVEL=debug
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
SUBSYSLOCK=/var/lock/subsys/shorewall
STATEDIR=/var/lib/shorewall
MODULESDIR=
FW=fw
NAT_ENABLED=Yes
MANGLE_ENABLED=Yes
IP_FORWARDING=On
ADD_IP_ALIASES=Yes
ADD_SNAT_ALIASES=Yes
TC_ENABLED=Yes
CLEAR_TC=No
MARK_IN_FORWARD_CHAIN=No
CLAMPMSS=No
ROUTE_FILTER=Yes
NAT_BEFORE_RULES=No
MULTIPORT=Yes
DETECT_DNAT_IPADDRS=Yes
MUTEX_TIMEOUT=60
NEWNOTSYN=Yes
BLACKLIST_DISPOSITION=DROP
MACLIST_DISPOSITION=REJECT
TCP_FLAGS_DISPOSITION=DROP
#LAST LINE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Zones File</title>

      <programlisting>#
# Shorewall 1.4 -- Sample Zone File For Two Interfaces
# /etc/shorewall/zones
#
# This file determines your network zones. Columns are:
#
# ZONE Short name of the zone
# DISPLAY Display name of the zone
# COMMENTS Comments about the zone
#
#ZONE DISPLAY COMMENTS
net Net Internet
loc Local Local Networks
dmz DMZ Demilitarized Zone
vpn1 VPN1 VPN to Germany
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Interfaces File</title>

      <programlisting>##############################################################################
#ZONE INTERFACE BROADCAST OPTIONS
net eth0 62.123.106.127 routefilter,norfc1918,blacklist,tcpflags
loc eth1 detect dhcp,routefilter
dmz eth2 detect
vpn1 ipsec0
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
</programlisting>
    </section>

    <section>
      <title>Routestopped File</title>

      <programlisting>#INTERFACE HOST(S)
eth1 -
eth2 -
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Policy File</title>

      <programlisting>###############################################################################
#SOURCE DEST POLICY LOG LEVEL LIMIT:BURST
loc net ACCEPT
loc fw ACCEPT
loc dmz ACCEPT
# If you want open access to the Internet from your Firewall 
# remove the comment from the following line.
fw net ACCEPT
fw loc ACCEPT
fw dmz ACCEPT
dmz fw ACCEPT
dmz loc ACCEPT
dmz net ACCEPT
# 
# Adding VPN Access
loc vpn1 ACCEPT
dmz vpn1 ACCEPT
fw vpn1 ACCEPT
vpn1 loc ACCEPT
vpn1 dmz ACCEPT
vpn1 fw ACCEPT
#
net all DROP info
all all REJECT info
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Masq File</title>

      <programlisting>#INTERFACE SUBNET ADDRESS
eth0 eth1 1192.0.18.126
#
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>NAT File</title>

      <programlisting>#EXTERNAL INTERFACE INTERNAL ALL INTERFACES LOCAL
#
# Intranet Web Server
192.0.18.115 eth0:0 10.10.1.60 No No
#
# Project Web Server
192.0.18.84 eth0:1 10.10.1.55 No No
#
# Blackberry Server
192.0.18.97 eth0:2 10.10.1.55 No No
#
# Corporate Mail Server
192.0.18.93 eth0:3 10.10.1.252 No No
#
# Second Corp Mail Server
192.0.18.70 eth0:4 10.10.1.8 No No
#
# Sims Server
192.0.18.75 eth0:5 10.10.1.56 No No
#
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Proxy ARP File</title>

      <programlisting>#ADDRESS INTERFACE EXTERNAL HAVEROUTE
#
# The Corporate email server in the DMZ
192.0.18.80 eth2 eth0 No
#
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Tunnels File</title>

      <programlisting># TYPE ZONE GATEWAY GATEWAY ZONE PORT
ipsec net 134.147.129.82
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Rules File (The shell variables are set in /etc/shorewall/params)</title>

      <programlisting>##############################################################################
#ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
#
# Accept DNS connections from the firewall to the network
#
ACCEPT fw net tcp 53
ACCEPT fw net udp 53
#
# Accept SSH from internet interface from kaos only
#
ACCEPT net:192.0.18.98 fw tcp 22
#
# Accept connections from the local network for administration 
#
ACCEPT loc fw tcp 20:22
ACCEPT loc net tcp 22
ACCEPT loc fw tcp 53
ACCEPT loc fw udp 53
ACCEPT loc net tcp 53
ACCEPT loc net udp 53
#
# Allow Ping To And From Firewall
#
ACCEPT loc fw icmp 8
ACCEPT loc dmz icmp 8
ACCEPT loc net icmp 8
ACCEPT dmz fw icmp 8
ACCEPT dmz loc icmp 8
ACCEPT dmz net icmp 8
DROP net fw icmp 8
DROP net loc icmp 8
DROP net dmz icmp 8
ACCEPT fw loc icmp 8
ACCEPT fw dmz icmp 8
DROP fw net icmp 8
#
# Accept proxy web connections from the inside
#
ACCEPT loc fw tcp 8118
#
# Forward PcAnywhere, Oracle and Web traffic from outside to the Demo systems
# From a specific IP Address on the Internet.
# 
# ACCEPT net:207.65.110.10 loc:10.10.3.151 tcp 1521,http
# ACCEPT net:207.65.110.10 loc:10.10.2.32 tcp 5631:5632
#
# Intranet web server
ACCEPT net loc:10.10.1.60 tcp 443
ACCEPT dmz loc:10.10.1.60 tcp 443
#
# Projects web server
ACCEPT net loc:10.10.1.55 tcp 80
ACCEPT dmz loc:10.10.1.55 tcp 80
# 
# Blackberry Server
ACCEPT net loc:10.10.1.230 tcp 3101
#
# Corporate Email Server
ACCEPT net loc:10.10.1.252 tcp 25,53,110,143,443
#
# Corporate #2 Email Server
ACCEPT net loc:10.10.1.8 tcp 25,80,110,443
#
# Sims Server
ACCEPT net loc:10.10.1.56 tcp 80,443
ACCEPT net loc:10.10.1.56 tcp 7001:7002
ACCEPT net:63.83.198.0/24 loc:10.10.1.56 tcp 5631:5632
#
# Access to DMZ
ACCEPT loc dmz udp 53,177
ACCEPT loc dmz tcp 80,25,53,22,143,443,993,20,110 -
ACCEPT net dmz udp 53
ACCEPT net dmz tcp 25,53,22,21,123
ACCEPT dmz net tcp 25,53,80,123,443,21,22
ACCEPT dmz net udp 53
#
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
    </section>

    <section>
      <title>Start File</title>

      <programlisting>############################################################################
# Shorewall 1.4 -- /etc/shorewall/start
#
# Add commands below that you want to be executed after shorewall has
# been started or restarted.
#
qt service ipsec start</programlisting>
    </section>

    <section>
      <title>Stop File</title>

      <programlisting>############################################################################
# Shorewall 1.4 -- /etc/shorewall/stop
#
# Add commands below that you want to be executed at the beginning of a
# <quote>shorewall stop</quote> command.
#
qt service ipsec stop</programlisting>
    </section>

    <section>
      <title>Init File</title>

      <programlisting>############################################################################
# Shorewall 1.4 -- /etc/shorewall/init
#
# Add commands below that you want to be executed at the beginning of
# a <quote>shorewall start</quote> or <quote>shorewall restart</quote> command.
#
qt service ipsec stop</programlisting>
    </section>
  </section>
</article>