1
0
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-30 01:58:52 +01:00
shorewall_code/Shorewall/manpages/shorewall-rules.xml

1861 lines
79 KiB
XML
Raw Normal View History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall-rules</refentrytitle>
<manvolnum>5</manvolnum>
<refmiscinfo>Configuration Files</refmiscinfo>
</refmeta>
<refnamediv>
<refname>rules</refname>
<refpurpose>Shorewall rules file</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall/rules</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>Entries in this file govern connection establishment by defining
2013-05-03 18:19:45 +02:00
exceptions to the policies laid out in <ulink
url="/manpages/shorewall-policy.html">shorewall-policy</ulink>(5). By
default, subsequent requests and responses are automatically allowed using
connection tracking. For any particular (source,dest) pair of zones, the
rules are evaluated in the order in which they appear in this file and the
first terminating match is the one that determines the disposition of the
request. All rules are terminating except LOG and COUNT rules.</para>
<warning>
<para>If you masquerade or use SNAT from a local system to the internet,
you cannot use an ACCEPT rule to allow traffic from the internet to that
system. You <emphasis role="bold">must</emphasis> use a DNAT rule
instead.</para>
</warning>
<para>The rules file is divided into sections. Each section is introduced
by a "Section Header" which is a line beginning with [?]SECTION and
followed by the section name.</para>
<para>The optional "?" was added in Shorewalll 4.6.0 and is preferred.
Existing configurations may be converted to use this form using the
<command>shorewall update</command> command.</para>
<para>Sections are as follows and must appear in the order listed:</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">ALL</emphasis></term>
<listitem>
<para>This section was added in Shorewall 4.4.23. Rules in this
section are applied, regardless of the connection tracking state of
the packet.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ESTABLISHED</emphasis></term>
<listitem>
<para>Packets in the ESTABLISHED state are processed by rules in
this section.</para>
<para>The only ACTIONs allowed in this section are ACCEPT, DROP,
REJECT, LOG and QUEUE</para>
<para>There is an implicit ACCEPT rule inserted at the end of this
section.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">RELATED</emphasis></term>
<listitem>
<para>Packets in the RELATED state are processed by rules in this
section.</para>
<para>The only ACTIONs allowed in this section are ACCEPT, DROP,
REJECT, LOG and QUEUE</para>
<para>There is an implicit rule added at the end of this section
that invokes the RELATED_DISPOSITION (<ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">INVALID</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.13. Packets in the INVALID state are
processed by rules in this section.</para>
<para>The only Actions allowed in this section are ACCEPT, DROP,
REJECT, LOG and QUEUE.</para>
<para>There is an implicit rule added at the end of this section
that invokes the INVALID_DISPOSITION (<ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">UNTRACKED</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.13. Packets in the UNTRACKED state are
processed by rules in this section.</para>
<para>The only Actions allowed in this section are ACCEPT, DROP,
REJECT, LOG and QUEUE.</para>
<para>There is an implicit rule added at the end of this section
that invokes the UNTRACKED_DISPOSITION (<ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">NEW</emphasis></term>
<listitem>
<para>Packets in the NEW, INVALID and UNTRACKED states are processed
by rules in this section.</para>
</listitem>
</varlistentry>
</variablelist>
<note>
<para>If you are not familiar with Netfilter to the point where you are
comfortable with the differences between the various connection tracking
states, then it is suggested that you omit the <emphasis
role="bold">ESTABLISHED</emphasis> and <emphasis
role="bold">RELATED</emphasis> sections and place all of your
non-blacklisting rules in the NEW section (That's after the line that
reads SECTION NEW').</para>
</note>
<warning>
<para>If you specify FASTACCEPT=Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5) then the
<emphasis role="bold">ALL, ESTABLISHED</emphasis> and <emphasis
role="bold">RELATED</emphasis> sections must be empty.</para>
<para>An except is made if you are running Shorewall 4.4.27 or later and
2013-05-03 18:19:45 +02:00
you have specified a non-default value for RELATED_DISPOSITION or
RELATED_LOG_LEVEL. In that case, you may have rules in the RELATED
section of this file.</para>
</warning>
<para>You may omit any section that you don't need. If no Section Headers
appear in the file then all rules are assumed to be in the NEW
section.</para>
<para>When defining rules that rewrite the destination IP address and/or
port number (namely DNAT and REDIRECT rules), it is important to keep
straight which columns in the file specify the packet before rewriting and
which specify how the packet will look after rewriting.</para>
<itemizedlist>
<listitem>
<para>The DEST column specifies the final destination for the packet
after rewriting and can include the final IP address and/or port
number.</para>
</listitem>
<listitem>
<para>The remaining columns specify characteristics of the packet
before rewriting. In particular, the ORIGINAL DEST column gives the
original destination IP address of the packet and the DEST PORT(S)
column give the original destination port(s).</para>
</listitem>
</itemizedlist>
<para>The columns in the file are as follows (where the column name is
followed by a different name in parentheses, the different name is used in
the alternate specification syntax).</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">ACTION</emphasis> - <emphasis
role="bold"><replaceable>target</replaceable>[:</emphasis>{<emphasis>log-level</emphasis>|<emphasis
role="bold">none</emphasis>}[<emphasis role="bold"><emphasis
role="bold">!</emphasis></emphasis>][<emphasis
role="bold">:</emphasis><emphasis>tag</emphasis>]]</term>
<listitem>
<para>Specifies the action to be taken if the connection request
matches the rule. <replaceable>target</replaceable> must be one of
the following.</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">ACCEPT</emphasis></term>
<listitem>
<para>Allow the connection request.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ACCEPT+</emphasis></term>
<listitem>
<para>like ACCEPT but also excludes the connection from any
subsequent matching <emphasis
role="bold">DNAT</emphasis>[<emphasis
role="bold">-</emphasis>] or <emphasis
role="bold">REDIRECT</emphasis>[<emphasis
role="bold">-</emphasis>] rules.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ACCEPT!</emphasis></term>
<listitem>
<para>like ACCEPT but exempts the rule from being suppressed
by OPTIMIZE=1 in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis>action</emphasis></term>
<listitem>
<para>The name of an <emphasis>action</emphasis> declared in
<ulink
url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5)
or in /usr/share/shorewall/actions.std.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">ADD(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.12. Causes addresses and/or port
numbers to be added to the named
<replaceable>ipset</replaceable>. The
2013-05-03 18:19:45 +02:00
<replaceable>flags</replaceable> specify the address or tuple
to be added to the set and must match the type of ipset
involved. For example, for an iphash ipset, either the SOURCE
or DESTINATION address can be added using
<replaceable>flags</replaceable> <emphasis
role="bold">src</emphasis> or <emphasis
role="bold">dst</emphasis> respectively (see the -A command in
ipset (8)).</para>
<para>ADD is non-terminating. Even if a packet matches the
rule, it is passed on to the next rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>AUDIT[(accept|drop|reject)]</term>
<listitem>
<para>Added in Shorewall 4.5.10. Audits the packet with the
specified type; if the type is omitted, then
<option>drop</option> is assumed. Require AUDIT_TARGET support
in the kernel and iptables.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>A_ACCEPT, A_ACCEPT+ and A_ACCEPT!</term>
<listitem>
<para>Added in Shorewall 4.4.20. Audited versions of ACCEPT,
ACCEPT+ and ACCEPT! respectively. Require AUDIT_TARGET support
in the kernel and iptables.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>A_DROP and A_DROP!</term>
<listitem>
<para>Added in Shorewall 4.4.20. Audited versions of DROP and
DROP! respectively. Require AUDIT_TARGET support in the kernel
and iptables.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>A_REJECT AND A_REJECT!</term>
<listitem>
<para>Added in Shorewall 4.4.20. Audited versions of REJECT
and REJECT! respectively. Require AUDIT_TARGET support in the
kernel and iptables.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">[?]COMMENT</emphasis></term>
<listitem>
<para>the rest of the line will be attached as a comment to
the Netfilter rule(s) generated by the following entries. The
comment will appear delimited by "/* ... */" in the output of
"shorewall show &lt;chain&gt;". To stop the comment from being
attached to further rules, simply include COMMENT on a line by
itself.</para>
<note>
<para>Beginning with Shorewall 4.5.11, ?COMMENT is a synonym
for COMMENT and is preferred.</para>
</note>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">CONTINUE</emphasis></term>
<listitem>
<para>For experts only.</para>
<para>Do not process any of the following rules for this
(source zone,destination zone). If the source and/or
destination IP address falls into a zone defined later in
<ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5)
or in a parent zone of the source or destination zones, then
this connection request will be passed to the rules defined
for that (those) zone(s). See <ulink
url="/manpages/shorewall-nesting.html">shorewall-nesting</ulink>(5)
for additional information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">CONTINUE!</emphasis></term>
<listitem>
<para>like CONTINUE but exempts the rule from being suppressed
by OPTIMIZE=1 in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">COUNT</emphasis></term>
<listitem>
<para>Simply increment the rule's packet and byte count and
pass the packet to the next rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">DEL(<replaceable>ipset</replaceable>:<replaceable>flags</replaceable>)</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.12. Causes an entry to be deleted
from the named <replaceable>ipset</replaceable>. The
2013-05-03 18:19:45 +02:00
<replaceable>flags</replaceable> specify the address or tuple
to be deleted from the set and must match the type of ipset
involved. For example, for an iphash ipset, either the SOURCE
2013-05-03 18:19:45 +02:00
or DESTINATION address can be deleted using
<replaceable>flags</replaceable> <emphasis
role="bold">src</emphasis> or <emphasis
role="bold">dst</emphasis> respectively (see the -D command in
ipset (8)).</para>
<para>DEL is non-terminating. Even if a packet matches the
rule, it is passed on to the next rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DNAT</emphasis></term>
<listitem>
<para>Forward the request to another system (and optionally
another port).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DNAT-</emphasis></term>
<listitem>
<para>Advanced users only.</para>
<para>Like <emphasis role="bold">DNAT</emphasis> but only
generates the <emphasis role="bold">DNAT</emphasis> iptables
rule and not the companion <emphasis
role="bold">ACCEPT</emphasis> rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DROP</emphasis></term>
<listitem>
<para>Ignore the request.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DROP!</emphasis></term>
<listitem>
<para>like DROP but exempts the rule from being suppressed by
OPTIMIZE=1 in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>HELPER</term>
<listitem>
<para>Added in Shorewall 4.5.7. This action requires that the
HELPER column contains the name of the Netfilter helper to be
associated with connections matching this connection. May only
be specified in the NEW section and is useful for being able
to specify a helper when the applicable policy is ACCEPT. No
destination zone should be specified in HELPER rules.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">INLINE</emphasis>[(<replaceable>action</replaceable>)]</term>
<listitem>
<para>Added in Shorewall 4.5.16. This action allows you to
construct most of the rule yourself using iptables syntax. The
part that you specify must follow a semicolon (';') and is
completely free-form. If the target of the rule (the part
following 'j') is something that Shorewall supports in the
ACTION column, then you may enclose it in parentheses (e.g.,
INLINE(ACCEPT)). Otherwise, you can include it after the
semicolon. In this case, you must declare the target as a
builtin action in <ulink
url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5).</para>
<para>Some considerations when using INLINE:</para>
<itemizedlist>
<listitem>
<para>The <option>p</option>, <option>s</option>,
<option>d</option>, <option>i</option>,
<option>o</option>, <option>policy</option>, and state
match (<option>state</option> or <option>conntrack
--ctstate</option>) matches will always appear in the
front of the rule in that order.</para>
</listitem>
<listitem>
<para>When multiple matches are specified, the compiler
will keep them in the order in which they appear
(excluding the above listed ones), but they will not
necessarily be at the end of the generated rule. For
example, if addresses are specified in the SOURCE and/or
DEST columns, their generated matches will appear after
those specified using ';'.</para>
</listitem>
</itemizedlist>
</listitem>
</varlistentry>
<varlistentry>
<term>IPTABLES({<replaceable>target</replaceable>
[<replaceable>option</replaceable> ...])</term>
<listitem>
<para>This action allows you to specify an iptables target
with options (e.g., 'IPTABLES(MARK --set-xmark 0x01/0xff)'. If
the target is not one recognized by Shorewall, the following
error message will be issued:</para>
<simplelist>
<member>ERROR: Unknown target
(<replaceable>target</replaceable>)</member>
</simplelist>
<para>This error message may be eliminated by adding the
<replaceable>target</replaceable> as a builtin action in
<ulink
url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">LOG:<replaceable>level</replaceable></emphasis></term>
<listitem>
<para>Simply log the packet and continue with the next
rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis>macro</emphasis><emphasis
role="bold">[(<replaceable>macrotarget</replaceable>)]</emphasis></term>
<listitem>
<para>The name of a macro defined in a file named
macro.<emphasis>macro</emphasis>. If the macro accepts an
action parameter (Look at the macro source to see if it has
PARAM in the TARGET column) then the
<emphasis>macro</emphasis> name is followed by the
parenthesized <emphasis>macrotarget</emphasis> (<emphasis
role="bold">ACCEPT</emphasis>, <emphasis
role="bold">DROP</emphasis>, <emphasis
role="bold">REJECT</emphasis>, ...) to be substituted for the
parameter.</para>
<para>Example: FTP(ACCEPT).</para>
<para>The older syntax where the macro name and the target are
separated by a slash (e.g. FTP/ACCEPT) is still allowed but is
deprecated.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)]</term>
<listitem>
<para>Added in Shorewall 4.5.9.3. Queues matching packets to a
2013-05-03 18:19:45 +02:00
back end logging daemon via a netlink socket then continues to
the next rule. See <ulink
url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
<para>Similar to<emphasis role="bold">
LOG:NFLOG</emphasis>[(<replaceable>nflog-parameters</replaceable>)],
except that the log level is not changed when this ACTION is
used in an action or macro body and the invocation of that
action or macro specifies a log level.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">NFQUEUE</emphasis>[(<replaceable>queuenumber</replaceable>)]</term>
<listitem>
<para>Queues the packet to a user-space application using the
nfnetlink_queue mechanism. If a
<replaceable>queuenumber</replaceable> is not specified, queue
zero (0) is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">NFQUEUE![(<replaceable>queuenumber</replaceable>)]</emphasis></term>
<listitem>
<para>like NFQUEUE but exempts the rule from being suppressed
by OPTIMIZE=1 in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">NONAT</emphasis></term>
<listitem>
<para>Excludes the connection from any subsequent <emphasis
role="bold">DNAT</emphasis>[-] or <emphasis
role="bold">REDIRECT</emphasis>[-] rules but doesn't generate
a rule to accept the traffic.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">QUEUE</emphasis></term>
<listitem>
<para>Queue the packet to a user-space application such as
ftwall (http://p2pwall.sf.net). The application may reinsert
the packet for further processing.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">QUEUE!</emphasis></term>
<listitem>
<para>like QUEUE but exempts the rule from being suppressed by
OPTIMIZE=1 in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">REJECT</emphasis></term>
<listitem>
<para>disallow the request and return an icmp-unreachable or
an RST packet.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">REJECT!</emphasis></term>
<listitem>
<para>like REJECT but exempts the rule from being suppressed
by OPTIMIZE=1 in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">REDIRECT</emphasis></term>
<listitem>
<para>Redirect the request to a server running on the
firewall.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">REDIRECT-</emphasis></term>
<listitem>
<para>Advanced users only.</para>
<para>Like <emphasis role="bold">REDIRECT</emphasis> but only
generates the <emphasis role="bold">REDIRECT</emphasis>
iptables rule and not the companion <emphasis
role="bold">ACCEPT</emphasis> rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">ULOG</emphasis>[(<replaceable>ulog-parameters</replaceable>)]</term>
<listitem>
<para>Added in Shorewall 4.5.10. Queues matching packets to a
2013-05-03 18:19:45 +02:00
back end logging daemon via a netlink socket then continues to
the next rule. See <ulink
url="/shorewall.logging.html">http://www.shorewall.net/shorewall_logging.html</ulink>.</para>
<para>Similar to<emphasis role="bold">
LOG:ULOG</emphasis>[(<replaceable>ulog-parameters</replaceable>)],
except that the log level is not changed when this ACTION is
used in an action or macro body and the invocation of that
action or macro specifies a log level.</para>
</listitem>
</varlistentry>
</variablelist>
<para>The <replaceable>target</replaceable> may optionally be
followed by ":" and a syslog log level (e.g, REJECT:info or
Web(ACCEPT):debug). This causes the packet to be logged at the
specified level. Note that if the <emphasis
role="bold">ACTION</emphasis> involves destination network address
translation (DNAT, REDIRECT, etc.) then the packet is logged
<emphasis role="bold">before</emphasis> the destination address is
rewritten.</para>
<para>If the <emphasis role="bold">ACTION</emphasis> names an
<emphasis>action</emphasis> declared in <ulink
url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5)
or in /usr/share/shorewall/actions.std then:</para>
<itemizedlist>
<listitem>
<para>If the log level is followed by "!' then all rules in the
action are logged at the log level.</para>
</listitem>
<listitem>
<para>If the log level is not followed by "!" then only those
rules in the action that do not specify logging are logged at
the specified level.</para>
</listitem>
<listitem>
<para>The special log level <emphasis
role="bold">none!</emphasis> suppresses logging by the
action.</para>
</listitem>
</itemizedlist>
<para>You may also specify <emphasis role="bold">ULOG</emphasis> or
<emphasis role="bold">NFLOG</emphasis> (must be in upper case) as a
log level.This will log to the ULOG or NFLOG target for routing to a
separate log through use of ulogd (<ulink
url="http://www.netfilter.org/projects/ulogd/index.html">http://www.netfilter.org/projects/ulogd/index.html</ulink>).</para>
<para>Actions specifying logging may be followed by a log tag (a
string of alphanumeric characters) which is appended to the string
generated by the LOGPREFIX (in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5)).</para>
<para>Example: ACCEPT:info:ftp would include 'ftp ' at the end of
the log prefix generated by the LOGPREFIX setting.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">SOURCE</emphasis> -
{<emphasis>zone</emphasis>|<emphasis>zone-list</emphasis>[+]|{<emphasis
role="bold">all</emphasis>|<emphasis
role="bold">any</emphasis>}[<emphasis
role="bold">+</emphasis>][<emphasis
role="bold">-</emphasis>]}<emphasis
role="bold">[:</emphasis><emphasis>interface</emphasis>][<emphasis
role="bold">:</emphasis>{<emphasis>address-or-range</emphasis>[,<emphasis>address-or-range</emphasis>]...[<emphasis>exclusion</emphasis>]|<emphasis>exclusion</emphasis>|<emphasis
role="bold">+</emphasis><emphasis>ipset</emphasis>|<replaceable>^countrycode-list</replaceable>}</term>
<listitem>
<para>Source hosts to which the rule applies. May be a
<replaceable>zone</replaceable> declared in /etc/shorewall/zones,
<emphasis role="bold">$FW</emphasis> to indicate the firewall
itself, <emphasis role="bold">all</emphasis>, <emphasis
role="bold">all+</emphasis>, <emphasis role="bold">all-</emphasis>,
<emphasis role="bold">all+-</emphasis> or <emphasis
role="bold">none</emphasis>.</para>
<para>Beginning with Shorewall 4.4.13, you may use a
<replaceable>zone-list </replaceable>which consists of a
comma-separated list of zones declared in <ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink> (5).
This <replaceable>zone-list</replaceable> may be optionally followed
by "+" to indicate that the rule is to apply to intra-zone traffic
as well as inter-zone traffic.</para>
<para>When <emphasis role="bold">none</emphasis> is used either in
the <emphasis role="bold">SOURCE</emphasis> or <emphasis
role="bold">DEST</emphasis> column, the rule is ignored.</para>
<para><emphasis role="bold">all</emphasis> means "All Zones",
including the firewall itself. <emphasis role="bold">all-</emphasis>
means "All Zones, except the firewall itself". When <emphasis
role="bold">all</emphasis>[<emphasis role="bold">-</emphasis>] is
used either in the <emphasis role="bold">SOURCE</emphasis> or
<emphasis role="bold">DEST</emphasis> column intra-zone traffic is
not affected. When <emphasis role="bold">all+</emphasis>[<emphasis
role="bold">-</emphasis>] is "used, intra-zone traffic is affected.
Beginning with Shorewall 4.4.13, exclusion is supported -- see see
<ulink
url="/manpages/shorewall-exclusion.html">shorewall-exclusion</ulink>(5).</para>
<para>Except when <emphasis role="bold">all</emphasis>[<emphasis
role="bold">+</emphasis>][<emphasis role="bold">-</emphasis>] or
<emphasis role="bold">any</emphasis>[<emphasis
role="bold">+</emphasis>][<emphasis role="bold">-</emphasis>] is
specified, clients may be further restricted to a list of networks
and/or hosts by appending ":" and a comma-separated list of network
and/or host addresses. Hosts may be specified by IP or MAC address;
mac addresses must begin with "~" and must use "-" as a
separator.</para>
<para>The above restriction on <emphasis
role="bold">all</emphasis>[<emphasis
role="bold">+</emphasis>][<emphasis role="bold">-</emphasis>] and
<emphasis role="bold">any</emphasis>[<emphasis
role="bold">+</emphasis>][<emphasis role="bold">-</emphasis>] is
removed in Shorewall-4.4.13.</para>
<para><emphasis role="bold">any</emphasis> is equivalent to
<emphasis role="bold">all</emphasis> when there are no nested zones.
When there are nested zones, <emphasis role="bold">any</emphasis>
only refers to top-level zones (those with no parent zones). Note
that <emphasis role="bold">any</emphasis> excludes all vserver
zones, since those zones are nested within the firewall zone.</para>
<para>Hosts may also be specified as an IP address range using the
syntax
<emphasis>lowaddress</emphasis>-<emphasis>highaddress</emphasis>.
This requires that your kernel and iptables contain iprange match
support. If your kernel and iptables have ipset match support then
you may give the name of an ipset prefaced by "+". The ipset name
may be optionally followed by a number from 1 to 6 enclosed in
square brackets ([]) to indicate the number of levels of source
bindings to be matched.</para>
<para>Beginning with Shorewall 4.4.17, the primary IP address of a
2013-05-03 18:19:45 +02:00
firewall interface can be specified by an ampersand ('&amp;')
followed by the logical name of the interface as found in the
INTERFACE column of <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>
(5).</para>
<para>Beginning with Shorewall 4.5.4, A
<replaceable>countrycode-list</replaceable> may be specified. A
countrycode-list is a comma-separated list of up to 15 two-character
ISO-3661 country codes enclosed in square brackets ('[...]') and
preceded by a caret ('^'). When a single country code is given, the
square brackets may be omitted. A list of country codes supported by
Shorewall may be found at <ulink
url="/ISO-3661.html">http://www.shorewall.net/ISO-3661.html</ulink>.
Specifying a <replaceable>countrycode-list</replaceable> requires
<firstterm>GeoIP Match</firstterm> support in your iptables and
Kernel.</para>
<para>You may exclude certain hosts from the set already defined
through use of an <emphasis>exclusion</emphasis> (see <ulink
url="/manpages/shorewall-exclusion.html">shorewall-exclusion</ulink>(5)).</para>
<para>Examples:</para>
<variablelist>
<varlistentry>
<term>dmz:192.168.2.2</term>
<listitem>
<para>Host 192.168.2.2 in the DMZ</para>
</listitem>
</varlistentry>
<varlistentry>
<term>net:155.186.235.0/24</term>
<listitem>
<para>Subnet 155.186.235.0/24 on the Internet</para>
</listitem>
</varlistentry>
<varlistentry>
<term>loc:192.168.1.1,192.168.1.2</term>
<listitem>
<para>Hosts 192.168.1.1 and 192.168.1.2 in the local
zone.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>loc:~00-A0-C9-15-39-78</term>
<listitem>
<para>Host in the local zone with MAC address
00:A0:C9:15:39:78.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>net:192.0.2.11-192.0.2.17</term>
<listitem>
<para>Hosts 192.0.2.11-192.0.2.17 in the net zone.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>net:!192.0.2.11-192.0.2.17</term>
<listitem>
<para>All hosts in the net zone except for
192.0.2.11-192.0.2.17.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>net:155.186.235.0/24!155.186.235.16/28</term>
<listitem>
<para>Subnet 155.186.235.0/24 on the Internet except for
155.186.235.16/28</para>
</listitem>
</varlistentry>
<varlistentry>
<term>$FW:&amp;eth0</term>
<listitem>
<para>The primary IP address of eth0 in the firewall zone
(Shorewall 4.4.17 and later).</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term></term>
<listitem>
<para></para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DEST</emphasis> -
{<emphasis>zone</emphasis>|<emphasis>zone-list</emphasis>[+]|{<emphasis
role="bold">all</emphasis>|<emphasis
role="bold">any</emphasis>}[<emphasis
role="bold">+</emphasis>][<emphasis
role="bold">-</emphasis>]}<emphasis
role="bold">[:{</emphasis><emphasis>interface</emphasis>|<emphasis>address-or-range</emphasis>[,<emphasis>address-or-range</emphasis>]...[<emphasis>exclusion</emphasis>]|<emphasis>exclusion</emphasis>|<emphasis
role="bold">+</emphasis><emphasis>ipset</emphasis>|<emphasis>^countrycode-list</emphasis>}][<option>:</option><replaceable>port</replaceable>[:<emphasis
role="bold">random</emphasis>]]</term>
<listitem>
<para>Location of Server. May be a zone declared in <ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5),
$<emphasis role="bold">FW</emphasis> to indicate the firewall
itself, <emphasis role="bold">all</emphasis>. <emphasis
role="bold">all+</emphasis> or <emphasis
role="bold">none</emphasis>.</para>
<para>Beginning with Shorewall 4.4.13, you may use a
<replaceable>zone-list </replaceable>which consists of a
comma-separated list of zones declared in <ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink> (5).
This <replaceable>zone-list</replaceable> may be optionally followed
by "+" to indicate that the rule is to apply to intra-zone traffic
as well as inter-zone traffic.</para>
<para>Beginning with Shorewall 4.5.4, A
<replaceable>countrycode-list</replaceable> may be specified. A
countrycode-list is a comma-separated list of up to 15 two-character
ISO-3661 country codes enclosed in square brackets ('[...]') and
preceded by a caret ('^'). When a single country code is given, the
square brackets may be omitted. A list of country codes supported by
Shorewall may be found at <ulink
url="/ISO-3661.html">http://www.shorewall.net/ISO-3661.html</ulink>.
Specifying a <replaceable>countrycode-list</replaceable> requires
<firstterm>GeoIP Match</firstterm> support in your iptables and
Kernel.</para>
<para>When <emphasis role="bold">none</emphasis> is used either in
the <emphasis role="bold">SOURCE</emphasis> or <emphasis
role="bold">DEST</emphasis> column, the rule is ignored.</para>
<para>When <emphasis role="bold">all</emphasis> is used either in
the <emphasis role="bold">SOURCE</emphasis> or <emphasis
role="bold">DEST</emphasis> column intra-zone traffic is not
affected. When <emphasis role="bold">all+</emphasis> is used,
intra-zone traffic is affected. Beginning with Shorewall 4.4.13,
exclusion is supported -- see see <ulink
url="/manpages/shorewall-exclusion.html">shorewall-exclusion</ulink>(5).</para>
<para><emphasis role="bold">any</emphasis> is equivalent to
<emphasis role="bold">all</emphasis> when there are no nested zones.
When there are nested zones, <emphasis role="bold">any</emphasis>
only refers to top-level zones (those with no parent zones).</para>
<para>The <replaceable>zone</replaceable> should be omitted in
DNAT-, REDIRECT- and NONAT rules.</para>
<para>If the DEST <replaceable>zone</replaceable> is a bport zone,
then either:<orderedlist numeration="loweralpha">
<listitem>
<para>the SOURCE must be <option>all[+][-]</option>, or</para>
</listitem>
<listitem>
<para>the SOURCE <replaceable>zone</replaceable> must be
another bport zone associated with the same bridge, or</para>
</listitem>
<listitem>
<para>the SOURCE <replaceable>zone</replaceable> must be an
ipv4 zone that is associated with only the same bridge.</para>
</listitem>
</orderedlist></para>
<para>Except when <emphasis role="bold">all</emphasis>[<emphasis
role="bold">+]|[-</emphasis>] is specified, the server may be
further restricted to a particular network, host or interface by
appending ":" and the network, host or interface. See <emphasis
role="bold">SOURCE</emphasis> above.</para>
<para>You may exclude certain hosts from the set already defined
through use of an <emphasis>exclusion</emphasis> (see <ulink
url="/manpages/shorewall-exclusion.html">shorewall-exclusion</ulink>(5)).</para>
<para>Restriction: MAC addresses are not allowed (this is a
Netfilter restriction).</para>
<para>Like in the <emphasis role="bold">SOURCE</emphasis> column,
you may specify a range of IP addresses using the syntax
<emphasis>lowaddress</emphasis>-<emphasis>highaddress</emphasis>.
When the <emphasis role="bold">ACTION</emphasis> is <emphasis
role="bold">DNAT</emphasis> or <emphasis
role="bold">DNAT-</emphasis>, the connections will be assigned to
addresses in the range in a round-robin fashion.</para>
<para>If you kernel and iptables have ipset match support then you
may give the name of an ipset prefaced by "+". The ipset name may be
optionally followed by a number from 1 to 6 enclosed in square
brackets ([]) to indicate the number of levels of destination
bindings to be matched. Only one of the <emphasis
role="bold">SOURCE</emphasis> and <emphasis
role="bold">DEST</emphasis> columns may specify an ipset
name.</para>
<para>Beginning with Shorewall 4.4.17, the primary IP address of a
2013-05-03 18:19:45 +02:00
firewall interface can be specified by an ampersand ('&amp;')
followed by the logical name of the interface as found in the
INTERFACE column of <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>
(5).</para>
<para>The <replaceable>port</replaceable> that the server is
listening on may be included and separated from the server's IP
2013-05-03 18:19:45 +02:00
address by ":". If omitted, the firewall will not modify the
destination port. A destination port may only be included if the
<emphasis role="bold">ACTION</emphasis> is <emphasis
role="bold">DNAT</emphasis> or <emphasis
role="bold">REDIRECT</emphasis>.</para>
<variablelist>
<varlistentry>
<term>Example:</term>
<listitem>
<para><emphasis role="bold">loc:192.168.1.3:3128</emphasis>
specifies a local server at IP address 192.168.1.3 and
listening on port 3128.</para>
</listitem>
</varlistentry>
</variablelist>
<para>The <emphasis>port</emphasis> may be specified as a service
name. You may specify a port range in the form
<emphasis>lowport-highport</emphasis> to cause connections to be
assigned to ports in the range in round-robin fashion. When a port
range is specified, <emphasis>lowport</emphasis> and
<emphasis>highport</emphasis> must be given as integers; service
names are not permitted. Additionally, the port range may be
optionally followed by <emphasis role="bold">:random</emphasis>
which causes assignment to ports in the list to be random.</para>
<para>If the <emphasis role="bold">ACTION</emphasis> is <emphasis
role="bold">REDIRECT</emphasis> or <emphasis
role="bold">REDIRECT-</emphasis>, this column needs only to contain
the port number on the firewall that the request should be
redirected to. That is equivalent to specifying
<option>$FW</option>::<replaceable>port</replaceable>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">PROTO</emphasis>- {<emphasis
role="bold">-</emphasis>|<emphasis
role="bold">tcp:syn</emphasis>|<emphasis
role="bold">ipp2p</emphasis>|<emphasis
role="bold">ipp2p:udp</emphasis>|<emphasis
role="bold">ipp2p:all</emphasis>|<emphasis>protocol-number</emphasis>|<emphasis>protocol-name</emphasis>|<emphasis
role="bold">all}</emphasis></term>
<listitem>
<para>Optional Protocol - <emphasis role="bold">ipp2p</emphasis>*
requires ipp2p match support in your kernel and iptables. <emphasis
role="bold">tcp:syn</emphasis> implies <emphasis
role="bold">tcp</emphasis> plus the SYN flag must be set and the
RST,ACK and FIN flags must be reset.</para>
2011-04-03 18:56:30 +02:00
<para>Beginning with Shorewall 4.4.19, this column can contain a
comma-separated list of protocol-numbers and/or protocol
names.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DEST PORT(S) (dport)</emphasis> -
{<emphasis
role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
<listitem>
<para>Optional destination Ports. A comma-separated list of Port
names (from services(5)), port numbers or port ranges; if the
protocol is <emphasis role="bold">icmp</emphasis>, this column is
interpreted as the destination icmp-type(s). ICMP types may be
2013-05-03 18:19:45 +02:00
specified as a numeric type, a numeric type and code separated by a
slash (e.g., 3/4), or a typename. See <ulink
url="/configuration_file_basics.htm#ICMP">http://www.shorewall.net/configuration_file_basics.htm#ICMP</ulink>.
2011-04-03 18:56:30 +02:00
Note that prior to Shorewall 4.4.19, only a single ICMP type may be
2013-05-03 18:19:45 +02:00
listed.</para>
<para>If the protocol is <emphasis role="bold">ipp2p</emphasis>,
this column is interpreted as an ipp2p option without the leading
"--" (example <emphasis role="bold">bit</emphasis> for bit-torrent).
If no port is given, <emphasis role="bold">ipp2p</emphasis> is
assumed.</para>
<para>A port range is expressed as
<emphasis>lowport</emphasis>:<emphasis>highport</emphasis>.</para>
<para>This column is ignored if <emphasis
role="bold">PROTO</emphasis> = <emphasis role="bold">all</emphasis>
but must be entered if any of the following columns are supplied. In
that case, it is suggested that this field contain a dash (<emphasis
role="bold">-</emphasis>).</para>
<para>If your kernel contains multi-port match support, then only a
single Netfilter rule will be generated if in this list and the
<emphasis role="bold">CLIENT PORT(S)</emphasis> list below:</para>
<para>1. There are 15 or less ports listed.</para>
<para>2. No port ranges are included or your kernel and iptables
2013-05-03 18:19:45 +02:00
contain extended multi-port match support.</para>
<para>Beginning with Shorewall 4.6.0, an
<replaceable>ipset</replaceable> name can be specified in this
column. This is intended to be used with
<firstterm>bitmap:port</firstterm> ipsets.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">SOURCE PORT(S)</emphasis> (sport) -
{<emphasis
role="bold">-</emphasis>|<emphasis>port-name-number-or-range</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>port-name-number-or-range</emphasis>]...|+<replaceable>ipset</replaceable>}</term>
<listitem>
<para>Optional port(s) used by the client. If omitted, any source
port is acceptable. Specified as a comma- separated list of port
names, port numbers or port ranges.</para>
<para>Beginning with Shorewall 4.5.15, you may place '=' in this
column, provided that the DEST PORT(S) column is non-empty. This
causes the rule to match when either the source port or the
destination port in a packet matches one of the ports specified in
2013-05-03 18:19:45 +02:00
DEST PORTS(S). Use of '=' requires multi-port match in your iptables
and kernel.</para>
<warning>
<para>Unless you really understand IP, you should leave this
column empty or place a dash (<emphasis role="bold">-</emphasis>)
in the column. Most people who try to use this column get it
wrong.</para>
</warning>
<para>If you don't want to restrict client ports but need to specify
an <emphasis role="bold">ORIGINAL DEST</emphasis> in the next
column, then place "-" in this column.</para>
<para>If your kernel contains multi-port match support, then only a
single Netfilter rule will be generated if in this list and the
<emphasis role="bold">DEST PORT(S)</emphasis> list above:</para>
<para>1. There are 15 or less ports listed.</para>
<para>2. No port ranges are included or your kernel and iptables
2013-05-03 18:19:45 +02:00
contain extended multi-port match support.</para>
<para>Beginning with Shorewall 4.6.0, an
<replaceable>ipset</replaceable> name can be specified in this
column. This is intended to be used with
<firstterm>bitmap:port</firstterm> ipsets.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ORIGINAL DEST</emphasis> (origdest) -
[<emphasis
role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...[<emphasis>exclusion</emphasis>]|<emphasis>exclusion</emphasis>]</term>
<listitem>
<para>Optional. If ACTION is <emphasis
role="bold">DNAT</emphasis>[<emphasis role="bold">-</emphasis>] or
<emphasis role="bold">REDIRECT</emphasis>[<emphasis
role="bold">-</emphasis>] then if this column is included and is
different from the IP address given in the <emphasis
role="bold">DEST</emphasis> column, then connections destined for
that address will be forwarded to the IP and port specified in the
<emphasis role="bold">DEST</emphasis> column.</para>
<para>A comma-separated list of addresses may also be used. This is
most useful with the <emphasis role="bold">REDIRECT</emphasis>
target where you want to redirect traffic destined for particular
set of hosts. Finally, if the list of addresses begins with "!"
(<emphasis>exclusion</emphasis>) then the rule will be followed only
if the original destination address in the connection request does
not match any of the addresses listed.</para>
<para>Beginning with Shorewall 4.4.17, the primary IP address of a
2013-05-03 18:19:45 +02:00
firewall interface can be specified by an ampersand ('&amp;')
followed by the logical name of the interface as found in the
INTERFACE column of <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>
(5).</para>
<para>For other actions, this column may be included and may contain
one or more addresses (host or network) separated by commas. Address
ranges are not allowed. When this column is supplied, rules are
generated that require that the original destination address matches
one of the listed addresses. This feature is most useful when you
want to generate a filter rule that corresponds to a <emphasis
role="bold">DNAT-</emphasis> or <emphasis
role="bold">REDIRECT-</emphasis> rule. In this usage, the list of
addresses should not begin with "!".</para>
<para>It is also possible to specify a set of addresses then exclude
part of those addresses. For example, <emphasis
role="bold">192.168.1.0/24!192.168.1.16/28</emphasis> specifies the
addresses 192.168.1.0-182.168.1.15 and 192.168.1.32-192.168.1.255.
See <ulink
url="/manpages/shorewall-exclusion.html">shorewall-exclusion</ulink>(5).</para>
<para>See <ulink
url="/PortKnocking.html">http://www.shorewall.net/PortKnocking.html</ulink>
for an example of using an entry in this column with a user-defined
action rule.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">RATE LIMIT</emphasis> (rate) - [<emphasis
role="bold">-</emphasis>|[{<emphasis>s</emphasis>|<emphasis
role="bold">d</emphasis>}:[[<replaceable>name</replaceable>]:]]]<emphasis>rate</emphasis><emphasis
role="bold">/</emphasis>{<emphasis
role="bold">sec</emphasis>|<emphasis
2010-07-25 21:42:39 +02:00
role="bold">min</emphasis>|<emphasis
role="bold">hour</emphasis>|<emphasis
role="bold">day</emphasis>}[:<emphasis>burst</emphasis>]</term>
<listitem>
<para>You may optionally rate-limit the rule by placing a value in
this column:</para>
<para><emphasis>rate</emphasis> is the number of connections per
interval (<emphasis role="bold">sec</emphasis> or <emphasis
role="bold">min</emphasis>) and <emphasis>burst</emphasis> is the
largest burst permitted. If no <emphasis>burst</emphasis> is given,
2013-05-03 18:19:45 +02:00
a value of 5 is assumed. There may be no no white-space embedded in
the specification.</para>
<para>Example: <emphasis role="bold">10/sec:20</emphasis></para>
<para>When <option>s:</option> or <option>d:</option> is specified,
the rate applies per source IP address or per destination IP address
respectively. The <replaceable>name</replaceable> may be chosen by
the user and specifies a hash table to be used to count matching
2010-07-13 16:37:14 +02:00
connections. If not given, the name <emphasis
role="bold">shorewallN</emphasis> (where N is a unique integer) is
assumed. Where more than one rule specifies the same name, the
connections counts for the rules are aggregated and the individual
rates apply to the aggregated count.</para>
<para>Example: <emphasis role="bold">s:ssh:3/min:5</emphasis></para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">USER/GROUP</emphasis> (user) - [<emphasis
role="bold">!</emphasis>][<emphasis>user-name-or-number</emphasis>][<emphasis
role="bold">:</emphasis><emphasis>group-name-or-number</emphasis>][,...]</term>
<listitem>
<para>This optional column may only be non-empty if the SOURCE is
the firewall itself.</para>
<para>When this column is non-empty, the rule applies only if the
program generating the output is running under the effective
<emphasis>user</emphasis> and/or <emphasis>group</emphasis>
specified (or is NOT running under that id if "!" is given).</para>
<para>Beginning with Shorewall 4.5.8, multiple user or group
names/ids separated by commas may be specified.</para>
<para>Examples:</para>
<variablelist>
<varlistentry>
<term>joe</term>
<listitem>
<para>program must be run by joe</para>
</listitem>
</varlistentry>
<varlistentry>
<term>:kids</term>
<listitem>
<para>program must be run by a member of the 'kids'
group</para>
</listitem>
</varlistentry>
<varlistentry>
<term>!:kids</term>
<listitem>
<para>program must not be run by a member of the 'kids'
group</para>
</listitem>
</varlistentry>
<varlistentry>
<term>2001-2099</term>
<listitem>
<para>UIDs 2001 through 2099 (Shorewall 4.5.6 and
later)</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">MARK</emphasis> - [<emphasis
role="bold">!</emphasis>]<emphasis>value</emphasis>[/<emphasis>mask</emphasis>][<emphasis
role="bold">:C</emphasis>]</term>
<listitem>
<para>Defines a test on the existing packet or connection mark. The
rule will match only if the test returns true.</para>
<para>If you don't want to define a test but need to specify
anything in the following columns, place a "-" in this field.</para>
<variablelist>
<varlistentry>
<term>!</term>
<listitem>
<para>Inverts the test (not equal)</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis>value</emphasis></term>
<listitem>
<para>Value of the packet or connection mark.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis>mask</emphasis></term>
<listitem>
<para>A mask to be applied to the mark before testing.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">:C</emphasis></term>
<listitem>
<para>Designates a connection mark. If omitted, the packet
mark's value is tested.</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">CONNLIMIT</emphasis> - [<emphasis
role="bold">!</emphasis>]<emphasis>limit</emphasis>[:<emphasis>mask</emphasis>]</term>
<listitem>
<para>May be used to limit the number of simultaneous connections
from each individual host to <replaceable>limit</replaceable>
connections. Requires connlimit match in your kernel and iptables.
While the limit is only checked on rules specifying CONNLIMIT, the
number of current connections is calculated over all current
connections from the SOURCE host. By default, the limit is applied
to each host but can be made to apply to networks of hosts by
specifying a <replaceable>mask</replaceable>. The
<replaceable>mask</replaceable> specifies the width of a VLSM mask
to be applied to the source address; the number of current
connections is then taken over all hosts in the subnet
<replaceable>source-address</replaceable>/<replaceable>mask</replaceable>.
When<option> !</option> is specified, the rule matches when the
number of connection exceeds the
<replaceable>limit</replaceable>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">TIME</emphasis> -
2013-05-03 18:19:45 +02:00
<emphasis>timeelement</emphasis>[&amp;<emphasis>timeelement</emphasis>...]</term>
<listitem>
<para>May be used to limit the rule to a particular time period each
day, to particular days of the week or month, or to a range defined
by dates and times. Requires time match support in your kernel and
iptables.</para>
<para><replaceable>timeelement</replaceable> may be:</para>
<variablelist>
<varlistentry>
<term>timestart=<replaceable>hh</replaceable>:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]</term>
<listitem>
<para>Defines the starting time of day.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>timestop=<replaceable>hh</replaceable>:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]</term>
<listitem>
<para>Defines the ending time of day.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>utc</term>
<listitem>
<para>Times are expressed in Greenwich Mean Time.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>localtz</term>
<listitem>
<para>Deprecated by the Netfilter team in favor of <emphasis
role="bold">kerneltz</emphasis>. Times are expressed in Local
Civil Time (default).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>kerneltz</term>
<listitem>
<para>Added in Shorewall 4.5.2. Times are expressed in Local
Kernel Time (requires iptables 1.4.12 or later).</para>
</listitem>
</varlistentry>
<varlistentry>
<term>weekdays=ddd[,ddd]...</term>
<listitem>
<para>where <replaceable>ddd</replaceable> is one of
<option>Mon</option>, <option>Tue</option>,
<option>Wed</option>, <option>Thu</option>,
<option>Fri</option>, <option>Sat</option> or
<option>Sun</option></para>
</listitem>
</varlistentry>
<varlistentry>
<term>monthdays=dd[,dd],...</term>
<listitem>
<para>where <replaceable>dd</replaceable> is an ordinal day of
the month</para>
</listitem>
</varlistentry>
<varlistentry>
<term>datestart=<replaceable>yyyy</replaceable>[-<replaceable>mm</replaceable>[-<replaceable>dd</replaceable>[<option>T</option><replaceable>hh</replaceable>[:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]]]]]</term>
<listitem>
<para>Defines the starting date and time.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>datestop=<replaceable>yyyy</replaceable>[-<replaceable>mm</replaceable>[-<replaceable>dd</replaceable>[<option>T</option><replaceable>hh</replaceable>[:<replaceable>mm</replaceable>[:<replaceable>ss</replaceable>]]]]]</term>
<listitem>
<para>Defines the ending date and time.</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">HEADERS</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.15. Not used in IPv4 configurations. If
you with to supply a value for one of the later columns, enter '-'
in this column.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">SWITCH -
[!]<replaceable>switch-name</replaceable>[={0|1}]</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.24 and allows enabling and disabling
the rule without requiring <command>shorewall
restart</command>.</para>
<para>The rule is enabled if the value stored in
<filename>/proc/net/nf_condition/<replaceable>switch-name</replaceable></filename>
is 1. The rule is disabled if that file contains 0 (the default). If
'!' is supplied, the test is inverted such that the rule is enabled
if the file contains 0.</para>
<para>Within the <replaceable>switch-name</replaceable>, '@0' and
'@{0}' are replaced by the name of the chain to which the rule is a
added. The <replaceable>switch-name</replaceable> (after '@...'
expansion) must begin with a letter and be composed of letters,
decimal digits, underscores or hyphens. Switch names must be 30
characters or less in length.</para>
<para>Switches are normally <emphasis role="bold">off</emphasis>. To
turn a switch <emphasis role="bold">on</emphasis>:</para>
<simplelist>
<member><command>echo 1 &gt;
/proc/net/nf_condition/<replaceable>switch-name</replaceable></command></member>
</simplelist>
<para>To turn it <emphasis role="bold">off</emphasis> again:</para>
<simplelist>
<member><command>echo 0 &gt;
/proc/net/nf_condition/<replaceable>switch-name</replaceable></command></member>
</simplelist>
<para>Switch settings are retained over <command>shorewall
restart</command>.</para>
2013-05-03 18:19:45 +02:00
<para>Beginning with Shorewall 4.5.10, when the
<replaceable>switch-name</replaceable> is followed by
<option>=0</option> or <option>=1</option>, then the switch is
initialized to off or on respectively by the
<command>start</command> command. Other commands do not affect the
switch setting.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">HELPER</emphasis> - [helper]</term>
<listitem>
<para>Added in Shorewall 4.5.7.</para>
<para>In the NEW section, causes the named conntrack
<replaceable>helper</replaceable> to be associated with this
connection; the contents of this column are ignored unless ACTION is
ACCEPT*, DNAT* or REDIRECT*.</para>
<para>In the RELATED section, will only match if the related
connection has the named <replaceable>helper</replaceable>
associated with it.</para>
<para>The <replaceable>helper</replaceable> may be one of:</para>
<simplelist>
<member><option>amanda</option></member>
<member><option>ftp</option></member>
<member><option>irc</option></member>
<member><option>netbios-ns</option></member>
<member><option>pptp</option></member>
<member><option>Q.931</option></member>
<member><option>RAS</option></member>
<member><option>sane</option></member>
<member><option>sip</option></member>
<member><option>snmp</option></member>
<member><option>tftp</option></member>
</simplelist>
<para>If the HELPERS option is specified in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>(5), then
any module specified in this column must be listed in the HELPERS
setting.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Examples</title>
<variablelist>
<varlistentry>
<term>Example 1:</term>
<listitem>
<para>Accept SMTP requests from the DMZ to the internet</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
ACCEPT dmz net tcp smtp</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 2:</term>
<listitem>
<para>Forward all ssh and http connection requests from the internet
to local system 192.168.1.3</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
DNAT net loc:192.168.1.3 tcp ssh,http</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 3:</term>
<listitem>
<para>Forward all http connection requests from the internet to
local system 192.168.1.3 with a limit of 3 per second and a maximum
burst of 10<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE
# PORT PORT(S) DEST LIMIT
DNAT net loc:192.168.1.3 tcp http - - 3/sec:10</programlisting></para>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 4:</term>
<listitem>
<para>Redirect all locally-originating www connection requests to
port 3128 on the firewall (Squid running on the firewall system)
except when the destination address is 192.168.2.2</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
REDIRECT loc 3128 tcp www - !192.168.2.2</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 5:</term>
<listitem>
<para>All http requests from the internet to address 130.252.100.69
are to be forwarded to 192.168.1.3</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
DNAT net loc:192.168.1.3 tcp 80 - 130.252.100.69</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 6:</term>
<listitem>
<para>You want to accept SSH connections to your firewall only from
internet IP addresses 130.252.100.69 and 130.252.100.70</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
ACCEPT net:130.252.100.69,130.252.100.70 $FW \
tcp 22</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 7:</term>
<listitem>
<para>You wish to accept connections from the internet to your
firewall on port 2222 and you want to forward them to local system
192.168.1.3, port 22</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
DNAT net loc:192.168.1.3:22 tcp 2222</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 8:</term>
<listitem>
<para>You want to redirect connection requests to port 80 randomly
to the port range 81-90.</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL
# PORT PORT(S) DEST
REDIRECT net $FW::81-90:random tcp www</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 9:</term>
<listitem>
<para>Shorewall does not impose as much structure on the Netfilter
rules in the 'nat' table as it does on those in the filter table. As
a consequence, when using Shorewall versions before 4.1.4, care must
be exercised when using DNAT and REDIRECT rules with zones defined
with wildcard interfaces (those ending with '+'. Here is an
example:</para>
<para><ulink
url="/manpages/shorewall-zones.html">shorewall-zones</ulink>(5):<programlisting> #ZONE TYPE OPTIONS
fw firewall
net ipv4
dmz ipv4
loc ipv4</programlisting></para>
<para><ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces</ulink>(5):<programlisting> #ZONE INTERFACE BROADCAST OPTIONS
net ppp0
loc eth1 detect
dmz eth2 detect
- ppp+ # Addresses are assigned from 192.168.3.0/24</programlisting></para>
<para><ulink
url="/manpages/shorewall-hosts.html">shorewall-host</ulink>(5):<programlisting> #ZONE HOST(S) OPTIONS
loc ppp+:192.168.3.0/24</programlisting></para>
<para>rules:</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST
# PORT(S)
REDIRECT loc 3128 tcp 80 </programlisting>
<simpara>Note that it would have been tempting to simply define the
loc zone entirely in shorewall-interfaces(8):</simpara>
<para><programlisting> #******************* INCORRECT *****************
#ZONE INTERFACE BROADCAST OPTIONS
net ppp0
loc eth1 detect
loc ppp+
dmz eth2</programlisting></para>
<para>This would have made it impossible to run a
internet-accessible web server in the DMZ because all traffic
entering ppp+ interfaces would have been redirected to port 3128 on
the firewall and there would have been no net-&gt;fw ACCEPT rule for
that traffic.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 10:</term>
<listitem>
2013-05-03 18:19:45 +02:00
<para>Add the tuple (source IP, dest port, dest IP) of an incoming
SSH connection to the ipset S:</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST
# PORT(S)
ADD(+S:dst,src,dst) net fw tcp 22</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 11:</term>
<listitem>
2011-02-03 22:28:50 +01:00
<para>You wish to limit SSH connections from remote systems to 1/min
with a burst of three (to allow for limited retry):</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE
# PORT(S) PORT(S) DEST LIMIT
SSH(ACCEPT) net all - - - - s:1/min:3</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 12:</term>
<listitem>
<para>Forward port 80 to dmz host $BACKUP if switch 'primary_down'
is on.</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ MARK CONNLIMIT TIME HEADERS SWITCH
# PORT(S) PORT(S) DEST LIMIT GROUP
DNAT net dmz:$BACKUP tcp 80 - - - - - - - - primary_down</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 13:</term>
<listitem>
<para>Drop all email from the <emphasis>Anonymous Proxy</emphasis>
and <emphasis>Satellite Provider</emphasis> address ranges:</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST
# PORT(S)
DROP net:^A1,A2 fw tcp 25</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 14:</term>
<listitem>
<para>You want to generate your own rule involving iptables targets
and matches not supported by Shorewall.</para>
<programlisting> #ACTION SOURCE DEST PROTO DEST
# PORT(S)
INLINE $FW net ; -p 6 -m mickey-mouse --name test -m set --match-set set1 src -m mickey-mouse --name test2 -j SECCTX --name test3</programlisting>
<para>The above will generate the following iptables-restore
input:</para>
<programlisting> -A fw2net -p 6 -m mickey-mouse --name test -m set --match-set set1 src -m mickey-mouse --name test2 -j SECCTX --name test3</programlisting>
<para>Note that SECCTX must be defined as a builtin action in <ulink
url="/manpages/shorewall-actions.html">shorewall-actions</ulink>(5):</para>
<programlisting> #ACTION OPTIONS
SECCTX builtin</programlisting>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall/rules</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="/ipsets.html">http://www.shorewall.net/ipsets.html</ulink></para>
<para><ulink
url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
<para><ulink
url="/shorewall_logging.html">http://www.shorewall.net/shorewall_logging.html</ulink></para>
<para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
2013-05-03 18:19:45 +02:00
shorewall-blacklist(5), shorewall-blrules(5), shorewall-hosts(5),
shorewall_interfaces(5), shorewall-ipsets(5), shorewall-maclist(5),
shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5),
shorewall-params(5), shorewall-policy(5), shorewall-providers(5),
shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
shorewall-tunnels(5), shorewall-zones(5)</para>
</refsect1>
</refentry>