shorewall_code/docs/Shorewall_Squid_Usage.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article id="Shorewall_Squid_Usage">
  <!--$Id$-->

  <articleinfo>
    <title>Using Shorewall with Squid</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate><?dbtimestamp format="Y/m/d"?></pubdate>

    <copyright>
      <year>2003-2008</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled <quote>
      <ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink>
      </quote>.</para>
    </legalnotice>
  </articleinfo>

  <para>This page covers Shorewall configuration to use with <ulink
  url="http://www.squid-cache.org">Squid</ulink> running as a Transparent
  Proxy or as a Manual Proxy.</para>

  <caution>
    <para><emphasis role="bold">This article applies to Shorewall 4.0 and
    later. If you are running a version of Shorewall earlier than Shorewall
    4.0.0 then please see the documentation for that
    release.</emphasis></para>
  </caution>

  <section id="Transparent">
    <title>Squid as a Transparent (Interception) Proxy</title>

    <important>
      <para>This section gives instructions for transparent proxying of HTTP.
      HTTPS (normally TCP port 443) <emphasis role="bold">cannot</emphasis> be
      proxied transparently (stop and think about it for a minute; if HTTPS
      could be transparently proxied, then how secure would it be?).</para>
    </important>

    <caution>
      <para>Please observe the following general requirements:</para>

      <itemizedlist>
        <listitem>
          <para>In all cases, Squid should be configured to run as a
          transparent proxy as described at <ulink
          url="http://wiki.squid-cache.org/SquidFaq/InterceptionProxy">http://wiki.squid-cache.org/SquidFaq/InterceptionProxy</ulink>.</para>

          <para>The bottom line of that article is that if you are running
          <emphasis role="bold">Squid 2.6 or later</emphasis>, then you simply
          need to add the word <firstterm>transparent</firstterm> to your
          http_port specification:</para>

          <programlisting>http_port 3128 transparent</programlisting>

          <para>In <emphasis role="bold">earlier Squid versions</emphasis>,
          you need to set several options:</para>

          <programlisting>http_port 3128
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy  on
httpd_accel_uses_host_header on</programlisting>
        </listitem>

        <listitem>
          <para>Depending on your distribution, other Squid configuration
          changes may be required. These changes typically consist of:</para>

          <orderedlist>
            <listitem>
              <para>Adding an ACL that represents the clients on your local
              network.</para>

              <para>Example:</para>

              <programlisting>ACL my_networks src 192.168.1.0/24 192.168.2.0/24</programlisting>
            </listitem>

            <listitem>
              <para>Allowing HTTP access to that ACL.</para>

              <para>Example:</para>

              <programlisting>http_access allow my_networks</programlisting>
            </listitem>
          </orderedlist>

          <para>See your distribution's Squid documentation and <ulink
          url="http://www.squid-cache.org/">http://www.squid-cache.org/</ulink>
          for details.</para>

          <para>It is a good idea to get Squid working as a <link
          linkend="Manual">manual proxy</link> first before you try
          transparent proxying.</para>
        </listitem>

        <listitem>
          <para>The following instructions mention the file
          /etc/shorewall/start - if you don't have that file, simply create
          it.</para>
        </listitem>

        <listitem>
          <para>When the Squid server is in the local zone, that zone must be
          defined ONLY by its interface -- no /etc/shorewall/hosts file
          entries. That is because the packets being routed to the Squid
          server still have their original destination IP addresses.</para>
        </listitem>

        <listitem>
          <para>You must have iptables installed on your Squid server.</para>
        </listitem>
      </itemizedlist>
    </caution>

    <caution>
      <para>In the instructions below, only TCP Port 80 is opened from the
      system running Squid to the Internet. If your users require browsing
      sites that use a port other than 80 (e.g.,
      http://www.domain.tld:<emphasis role="bold">8080</emphasis>) then you
      must open those ports as well.</para>
    </caution>

    <section id="Configurations">
      <title>Configurations</title>

      <para>Three different configurations are covered:</para>

      <simplelist>
        <member>Squid (transparent) Running on the Firewall</member>

        <member>Squid (transparent) Running in the local Network</member>

        <member>Squid (transparent) Running in a DMZ</member>
      </simplelist>

      <section id="Firewall">
        <title>Squid (transparent) Running on the Firewall</title>

        <para>You want to redirect all local www connection requests EXCEPT
        those to your own http server (206.124.146.177) to a Squid transparent
        proxy running on the firewall and listening on port 3128. Squid will
        of course require access to remote web servers.</para>

        <para>In <filename>/etc/shorewall/rules</filename>:</para>

        <programlisting>#ACTION   SOURCE     DEST     PROTO    DPORT            SPORT      ORIGDEST
ACCEPT    $FW        net      tcp      www
REDIRECT  loc        3128     tcp      www              -          !206.124.146.177
</programlisting>

        <para>There may be a requirement to exclude additional destination
        hosts or networks from being redirected. For example, you might also
        want requests destined for 130.252.100.0/24 to not be routed to
        Squid.</para>

        <para>If needed, you may just add the additional hosts/networks to the
        ORIGDEST column in your REDIRECT rule.</para>

        <para><filename>/etc/shorewall/rules</filename>:<programlisting>#ACTION   SOURCE     DEST     PROTO    DPORT            SPORT      ORIGDEST
REDIRECT  loc        3128     tcp      www              -          !206.124.146.177,130.252.100.0/24</programlisting></para>

        <para>People frequently ask <emphasis>How can I exclude certain
        internal systems from using the proxy? I want to allow those systems
        to go directly to the net</emphasis>.</para>

        <para>Suppose that you want to exclude 192.168.1.5 and 192.168.1.33
        from the proxy. Your rules would then be:</para>

        <programlisting>#ACTION   SOURCE     DEST     PROTO    DPORT            SPORT      ORIGDEST
ACCEPT    $FW        net      tcp      www
REDIRECT  loc:!192.168.1.5,192.168.1.33\
                     3128     tcp      www              -          !206.124.146.177,130.252.100.0/24
ACCEPT    loc        net      tcp      www</programlisting>

        <para>The last rule may be omitted if your loc-&gt;net policy is
        ACCEPT.</para>

        <para>In some cases (when running an LTSP server on the Shorewall
        system), you might want to transparently proxy web connections that
        originate on the firewall itself. This requires care to ensure that
        Squid's own web connections are not proxied.</para>

        <para>First, determine the user id that Squid is running under:</para>

        <programlisting>gateway:/etc/shorewall# <emphasis role="bold">ps aux | fgrep -i squid | fgrep -v fgrep</emphasis>
root     10085  0.0  0.0  23864   700 ?        Ss   Apr22   0:00 /usr/sbin/squid -D -YC
<emphasis role="bold">proxy</emphasis>    10088  0.0  0.9  40512 19192 ?        S    Apr22  10:58 <emphasis
            role="bold">(squid)</emphasis> -D -YC
gateway:/etc/shorewall# </programlisting>

        <para>In this case, the proxy process <emphasis
        role="bold">(squid)</emphasis> is running under the <emphasis
        role="bold">proxy</emphasis> user Id. We add these rules:</para>

        <programlisting>#ACTION   SOURCE     DEST     PROTO    DPORT            SPORT      ORIGDEST          RATE       USER
ACCEPT    $FW        net      tcp      www
REDIRECT  $FW        3128     tcp      www              -          -                 -         <emphasis
            role="bold"> !proxy</emphasis></programlisting>
      </section>

      <section id="Local">
        <title>Squid (transparent) Running in the local network</title>

        <para>You want to redirect all local www connection requests to a
        Squid transparent proxy running in your local zone at 192.168.1.3 and
        listening on port 3128. Your local interface is eth1. There may also
        be a web server running on 192.168.1.3. It is assumed that web access
        is already enabled from the local zone to the Internet.</para>

        <orderedlist>
          <listitem>
            <para>Add this entry to your /etc/shorewall/providers file.</para>

            <programlisting>#NAME   NUMBER  MARK    DUPLICATE       INTERFACE       GATEWAY         OPTIONS
Squid   1       202     -               eth1            192.168.1.3     loose,notrack</programlisting>
          </listitem>

          <listitem>
            <para>In <filename>/etc/shorewall/mangle</filename> add:</para>

            <programlisting>#ACTION        SOURCE              DEST        PROTO    DPORT            SPORT      ORIGDEST
MARK(202):P    eth1:!192.168.1.3   0.0.0.0/0   tcp      80</programlisting>

            <para>If you are still using a tcrules file, you should consider
            switching to using a mangle file (<command>shorewall update
            -t</command> (<command>shorewall update</command> on Shorewall 5.0
            and later) will do that for you). Corresponding
            /etc/shorewall/tcrules entries are:</para>

            <programlisting>#MARK    SOURCE              DEST        PROTO    DPORT
202:P    eth1:!192.168.1.3   0.0.0.0/0   tcp      80</programlisting>
          </listitem>

          <listitem>
            <para>In <filename> <filename>/etc/shorewall/interfaces</filename>
            </filename>:</para>

            <programlisting>#ZONE   INTERFACE    OPTIONS
loc     eth1         <emphasis role="bold">routeback,routefilter=0,logmartians=0</emphasis>        </programlisting>
          </listitem>

          <listitem>
            <para>On 192.168.1.3, arrange for the following command to be
            executed after networking has come up</para>

            <programlisting><command>iptables -t nat -A PREROUTING -i eth0 ! -d 192.168.1.3 -p tcp --dport 80 -j REDIRECT --to-ports 3128</command>          </programlisting>

            <para>If you are running RedHat on the server, you can simply
            execute the following commands after you have typed the iptables
            command above:</para>

            <programlisting><command>iptables-save &gt; /etc/sysconfig/iptables
 chkconfig --level 35 iptables on</command>         </programlisting>
          </listitem>
        </orderedlist>
      </section>

      <section id="DMZ">
        <title>Squid (transparent) Running in the DMZ</title>

        <para>You have a single system in your DMZ with IP address
        192.0.2.177. You want to run both a web server and Squid on that
        system.</para>
      </section>

      <section>
        <title>Simple Configuration</title>

        <para>In <filename>/etc/shorewall/rules</filename>:</para>

        <programlisting>#ACTION  SOURCE   DEST                 PROTO    DPORT           SPORT      ORIGDEST
DNAT     loc      dmz:192.0.2.177:3128 tcp      80              -          !192.0.2.177</programlisting>
      </section>

      <section>
        <title>More Complex configuration</title>

        <para>Assume that the dmz is connected through eth2 and that your
        local lan interfaces through eth1</para>

        <orderedlist>
          <listitem>
            <para>Add this entry to your /etc/shorewall/providers file.</para>

            <programlisting>#NAME   NUMBER  MARK    DUPLICATE       INTERFACE       GATEWAY         OPTIONS
Squid   1       202     -               eth2            192.0.2.177     loose,notrack</programlisting>
          </listitem>

          <listitem>
            <para>In <filename>/etc/shorewall/mangle</filename> add:</para>

            <programlisting>#ACTION        SOURCE              DEST        PROTO    DPORT
MARK(202):P    eth1                0.0.0.0/0   tcp      80</programlisting>

            <para>Corresponding /etc/shorewall/tcrules entries are:</para>

            <programlisting>#MARK    SOURCE              DEST        PROTO    DPORT
202:P    eth1                0.0.0.0/0   tcp      80</programlisting>
          </listitem>

          <listitem>
            <para>In <filename> <filename>/etc/shorewall/interfaces</filename>
            </filename>:</para>

            <programlisting>#ZONE   INTERFACE    OPTIONS
loc     eth2         <emphasis role="bold">routefilter=0,logmartians=0</emphasis>        </programlisting>
          </listitem>

          <listitem>
            <para>On 172.0.2.177, arrange for the following command to be
            executed after networking has come up</para>

            <programlisting><command>iptables -t nat -A PREROUTING -i eth0 ! -d 192.0.2.177 -p tcp --dport 80 -j REDIRECT --to-ports 3128</command>          </programlisting>

            <para>If you are running RedHat on the server, you can simply
            execute the following commands after you have typed the iptables
            command above:</para>

            <programlisting><command>iptables-save &gt; /etc/sysconfig/iptables
 chkconfig --level 35 iptables on</command>         </programlisting>
          </listitem>
        </orderedlist>
      </section>
    </section>
  </section>

  <section id="Manual">
    <title>Squid as a Manual Proxy</title>

    <para>Assume that Squid is running in zone SZ and listening on port SP;
    all web sites that are to be accessed through Squid are in the
    <quote>net</quote> zone. Then for each zone Z that needs access to the
    Squid server.</para>

    <para><filename>/etc/shorewall/rules</filename>:</para>

    <programlisting>#ACTION   SOURCE   DEST   PROTO   DPORT
ACCEPT    Z        SZ     tcp     SP
ACCEPT    SZ       net    tcp     80,443</programlisting>

    <example id="Example1">
      <title>Squid on the firewall listening on port 8080 with access from the
      <quote>loc</quote> zone:</title>

      <para><filename>/etc/shorewall/rules:</filename> <programlisting>#ACTION   SOURCE   DEST   PROTO    DPORT
ACCEPT    loc      $FW    tcp      8080
ACCEPT    $FW      net    tcp      80,443</programlisting></para>
    </example>
  </section>

  <section id="TPROXY">
    <title>Squid3 as a Transparent Proxy with TPROXY</title>

    <para>Shorewall 4.5.4 contains support for TPROXY. TPROXY differs from
    REDIRECT in that it does not modify the IP header and requires Squid 3 or
    later. Because the IP header stays intact, TPROXY requires policy routing
    to direct the packets to the proxy server running on the firewall. This
    approach requires TPROXY support in your kernel and iptables and Squid 3.
    See <ulink
    url="http://wiki.squid-cache.org/Features/Tproxy4">http://wiki.squid-cache.org/Features/Tproxy4</ulink>.</para>

    <note>
      <para>Support for the TPROXY action in shorewall-tcrules(5) and the
      <option>local</option> option in shorewall-providers(5) has been
      available since Shoreall 4.4.7. That support required additional rules
      to be added in the 'start' extention script to make it work reliably.
      Beginning with Shorewall 4.6.0, TPROXY in <ulink
      url="manpages/shorewall-tcrules.html">shorewall-tcrules</ulink>(5) and
      in <ulink
      url="manpages/shorewall-mangle.html">shorewall-mangle</ulink>(5) work as
      described here.</para>
    </note>

    <para>The following configuration works with Squid running on the firewall
    itself (assume that Squid is listening on port 3129 for TPROXY
    connections).</para>

    <para><filename>/etc/shorewall/interfaces:</filename></para>

    <programlisting>#ZONE        INTERFACE        OPTIONS
-            lo               -</programlisting>

    <para><filename>/etc/shorewall/providers</filename>:</para>

    <programlisting>#NAME   NUMBER   MARK    DUPLICATE  INTERFACE  GATEWAY         OPTIONS               COPY
Tproxy    1        -        -           lo        -            tproxy</programlisting>

    <note>
      <para>Notice that the MARK, DUPLICATE and GATEWAY columns are empty and
      that the only option is <option>tproxy</option>.</para>
    </note>

    <para><filename>/etc/shorewall/mangle</filename> (assume loc interface is
    eth1 and net interface is eth0):</para>

    <programlisting>#ACTION         SOURCE      DEST        PROTO      DPORT       SPORT
DIVERT          eth0        0.0.0.0/0   tcp        -           80
TPROXY(3129)    eth1        0.0.0.0/0   tcp        80</programlisting>

    <para>Corresponding <filename>/etc/shorewall/mangle</filename> are:</para>

    <programlisting>#MARK           SOURCE      DEST        PROTO      DPORT       SPORT
DIVERT          eth0        0.0.0.0/0   tcp        -           80
TPROXY(3129)    eth1        0.0.0.0/0   tcp        80</programlisting>

    <para>The DIVERT rules are used to avoid unnecessary invocation of TPROXY
    for request packets after the connection is established and to direct
    response packets back to Squid3.</para>

    <note>
      <para>If you run a web server on the Shorewall system that also listens
      on port 80, then you need to exclude it from TPROXY. Suppose that your
      web server listens on 192.0.2.144; then:</para>

      <programlisting>#MARK           SOURCE              DEST           PROTO      DPORT       SPORT
DIVERT          eth0                0.0.0.0/0      tcp        -           80
TPROXY(3129)    eth1                !192.0.2.144   tcp        80          -</programlisting>
    </note>

    <para>/etc/shorewall/rules:</para>

    <programlisting>#ACTION   SOURCE   DEST   PROTO   DPORT
ACCEPT    loc      $FW    tcp     80
ACCEPT    $FW      net    tcp     80</programlisting>

    <para><filename>/etc/squid3/squid.conf</filename>:</para>

    <programlisting>...
http_port 3129 tproxy
...</programlisting>

    <important>
      <para>If you use TPROXY with both IPv4 and IPv6, then both your local
      hosts and the gateway must have the same DNS view. If a client resolves
      a website URL to an IPv6 address and the server can only resolve to an
      IPv4 address, then Squid will attempt to connect to the IPv4 address
      using the local client's IPv6 address. That clearly doesn't work.</para>
    </important>
  </section>
</article>