shorewall_code/Shorewall/releasenotes.txt

Shorewall 4.3.8

Shorewall 4.3 is the development thread for Shorewall 4.4 which will be
released late in 2009.

----------------------------------------------------------------------------
               R E L E A S E  4 . 3  H I G H L I G H T S
----------------------------------------------------------------------------

1) Support for Shorewall-shell has been discontinued. Shorewall-perl
   has been combined with Shorewall-common to produce a single
   Shorewall package.

2) The interfaces file OPTIONs have been extended to largely remove the
   need for the hosts file.

3) It is now possible to define PREROUTING and OUTPUT marking rules
   that cause new connections to use the same provider as an existing
   connection of the same kind.

4) Dynamic Zone support is once again available for IPv4; ipset support is
   required in your kernel and in iptables.

----------------------------------------------------------------------------
                    M I G R A T I O N   I S S U E S
----------------------------------------------------------------------------

1)  The 'shorewall stop', 'shorewall clear', 'shorewall6 stop' and
    'shorewall6 clear' commands no longer read the 'routestopped'
    file. The 'routestopped' file used is the one that was present at
    the last 'start', 'restart' or 'restore' command.

2)  The old macro parameter syntax (e.g., SSH/ACCEPT) is now deprecated
    in favor of the new syntax (e.g., SSH(ACCEPT)). The 4.3 documentation
    uses the new syntax exclusively, although the old syntax
    continues to be supported.

----------------------------------------------------------------------------
          P R O B L E M S   C O R R E C T E D   I N   4 . 3 . 8
----------------------------------------------------------------------------

1)  Tuomo Soini provided a workaround patch for a problem seen in some
    kernel's (see FAQ 82) that caused 'shorewall start' to fail when
    USE_DEFAULT_RT=Yes .

2)  The swping program was not purging the interface status files when
    it first started.

----------------------------------------------------------------------------
             K N O W N   P R O B L E M S   R E M A I N I N G
----------------------------------------------------------------------------

None.

----------------------------------------------------------------------------
                N E W   F E A T U R E S   I N   4 . 3 . 8
----------------------------------------------------------------------------

1)  The generated program now attempts to detect all dynamic
    information when it first starts. If any of those steps fail, an
    error message is generated and the state of the firewall is not
    changed.

2)  Shorewall will now attempt to detect a dynamic gateway by reading
    the dhclient lease file for the interface
    (/var/run/dhcp/dhclient-<if>.lease).

3)  To improve readability of the configuration files, Shorewall now
    allows leading white space in continuation lines when the continued
    line ends in ":" or ",".

    Example (/etc/shorewall/rules):

    #ACTION	SOURCE		DEST		PROTO		DEST
    #                                                           PORT(S)
    ACCEPT	net:\
    		206.124.146.177,\
		206.124.146.178,\
		206.124.146.180\
				dmz		tcp		873

    The leading white space on the lines that contain just an IP
    address is ignored so the SOURCE column effectively contains
    "net:206.124.146.177,206.124.147.178,206.124.146.180".

4)  The generated script now uses iptables[6]-restore to instantiate
    the Netfilter ruleset during processing of the 'stop' command. As a
    consequence, the 'critical' option in /etc/shorewall/route_stopped
    is no longer needed and will result in a warning.

5)  A new AUTOMAKE option has been added to shorewall.conf and
    shorewall6.conf. When set to 'Yes', this option causes new behavior
    during processing of the 'start' command; if no files in
    /etc/shorewall/ (/etc/shorewall6) have changed since the last
    'start' or 'restart', then the compilation step is skipped and the
    script used during the last 'start' or 'restart' is used to start
    the firewall.

    Note that the 'make' utility must be installed on the firewall
    system in order for AUTOMAKE=Yes to work correctly.

----------------------------------------------------------------------------
                 N E W   F E A T U R E S   IN   4 . 3
----------------------------------------------------------------------------

1)  The Shorewall packaging has been completely revamped in Shorewall
    4.3.

    The new packages are:

    - Shorewall.   Includes the former Shorewall-common and
                   Shorewall-perl packages. Includes everything needed
                   to create an IPv4 firewall.

    - Shorewall6.  Requires Shorewall. Adds the components necessary to
      		   create an IPv6 firewall.

    - Shorewall-lite

		   May be installed on a firewall system to run
		   IPv4 firewall scripts generated by Shorewall.

    - Shorewall6-lite

		   May be installed on a firewall system to run
		   IPv6 firewall scripts generated by Shorewall6.

2)  The interfaces file supports a new 'nets=' option. This option
    allows users to restrict a zone's definition to particular networks
    through an interface without having to use the hosts file.

    Example interfaces file:

    #ZONE	INTERFACE	BROADCAST		OPTIONS
    loc		eth3		detect			dhcp,logmartians=1,routefilter=1,nets=172.20.1.0/24
    dmz     	eth4		detect			logmartians=1,routefilter=1,nets=206.124.146.177
    net		eth0		detect			dhcp,blacklist,tcpflags,optional,routefilter=0,nets=(!172.20.0.0/24,206.124.146.177)
    net		eth2		detect			dhcp,blacklist,tcpflags,optional,upnp,routefilter=0,nets=(!172.20.0.0/24,206.124.146.177)
    loc		tun+		detect			nets=172.20.0.0/24
    #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE

    Note that when more than one network address is listed, the list
    must be enclosed in parentheses. Notice also that exclusion may be
    used.

    The first entry in the above interfaces file is equivalent to the
    following:

    interfaces:

    #ZONE	INTERFACE	BROADCAST		OPTIONS
    -		eth0		detect			dhcp,logmartians=1,routefilter=1

    hosts:

    #ZONE	HOST(S)					OPTIONS
    loc		$INT_IF:192.20.1.0/24			broadcast

    Note that the 'broadcast' option is automatically assumed and need
    not be explicitly specified.

3)  Some websites run applications that require multiple connections
    from a client browser. Where multiple 'balanced' providers are
    configured, this can lead to problems when some of the connections
    are routed through one provider and some through another.

    To work around this issue, the SAME target has been added to
    /etc/shorewall/tcrules. SAME may be used in the PREROUTING and
    OUTPUT chains. When used in PREROUTING, it causes matching
    connections from an individual local system to all use the same
    provider.

    For example:

    	SAME:P	192.168.1.0/24	-	tcp	80,443

    If a host in 192.168.1.0/24 attempts a connection on TCP port 80 or
    443 and it has sent a packet on either of those ports in the last
    five minutes then the new connection will use the same provider as
    the connection over which that last packet was sent.

    When used in the OUTPUT chain, it causes all matching connections
    to an individual remote system to all use the same provider.

    For example:

    	SAME	$FW	-	tcp	80,443

    If the firewall attempts a connection on TCP port 80 or
    443 and it has sent a packet on either of those ports in the last
    five minutes to the same remote system then the new connection will
    use the same provider as the connection over which that last packet
    was sent.

    Important note: SAME only works with providers that have the
    'track' option specified in /etc/shorewall/providers.

4)  The file /var/lib/shorewall/.restore has been renamed to
    /var/lib/shorewall/firewall. A similar change has been made in
    Shorewall6.

    When a successful start or restart is completed, the script that
    executed the command copies itself to to
    /var/lib/shorewall[6]/firewall.

5)  Dynamic zone support is once again available for IPv4. This support 
    is built on top of ipsets so you must have the xtables-addons
    installed on the firewall system.

    Dynamic zones are available when Shorewall-lite is used as well.

    Note that the dynamic zone support built into Shorewall provides no
    additional functionality over what is provided by simply defining a
    zone in terms of an ipset (see
    http://www1.shorewall.net/ipsets.html#Dynamic). 

    You define a zone as having dynamic content in one of two ways:

    - By specifying nets=dynamic in the OPTIONS column of an entry for
      the zone in /etc/shorewall/interfaces; or

    - By specifying <interface>:dynamic in the HOST(S) column of an
      entry for the zone in /etc/shorewall/hosts.

    When there are any dynamic zones present in your configuration, 
    Shorewall (Shorewall-lite) will:

    a) Execute the following commands during 'shorewall start' or
    'shorewall-lite start'.

           ipset -U :all: :all:
	   ipset -U :all: :default:
	   ipset -F
	   ipset -X   
	   ipset -R < ${VARDIR}/ipsets.save

       where $VARDIR normally contains /var/lib/shorewall
       (/var/lib/shorewall-lite) but may be modified by
       /etc/shorewall/vardir (/etc/shorewall-lite/vardir).


    b) During 'start', 'restart' and 'restore' processing, Shorewall
       will then attempt to create an ipset named <zone>_<interface>
       for each zone/interface pair that has been specified as
       dynamic. The type of ipset created is 'iphash' so that only
       individual IPv4 addresses may be added to the set.

    c) Execute the following commands during 'shorewall stop' or
       'shorewall-lite stop':

           if ipset -S > ${VARDIR}/ipsets.tmp; then
              mv -f ${VARDIR}/ipsets.tmp ${VARDIR}/ipsets.save
	   fi

    The 'shorewall add' and 'shorewall delete' commands are supported
    with their original syntax:

           add <interface>[:<host-list>] ... <zone>

           delete <interface>[:<host-list>] ... <zone>

    In addition, the 'show dynamic' command is added that lists the dynamic
    content of a zone.

    	    show dynamic <zone>

    These commands are supported by shorewall-lite as well.