shorewall_code/Shorewall2/firewall

#!/bin/sh
#
#     The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V2.3
#
#     This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
#     (c) 1999,2000,2001,2002,2003,2004,2005 - Tom Eastep (teastep@shorewall.net)
#
#	Complete documentation is available at http://shorewall.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
#	If an error occurs while starting or restarting the firewall, the
#	firewall is automatically stopped.
#
#	Commands are:
#
#	   shorewall start			  Starts the firewall
#	   shorewall restart			  Restarts the firewall
#	   shorewall stop			  Stops the firewall
#	   shorewall status			  Displays firewall status
#	   shorewall reset			  Resets iptables packet and
#						  byte counts
#	   shorewall clear			  Remove all Shorewall chains
#						  and rules/policies.
#	   shorewall refresh	.		  Rebuild the common chain
#          shorewall check                        Verify the more heavily-used
#                                                 configuration files.
#
# Mutual exclusion -- These functions are jackets for the mutual exclusion
#		      routines in $FUNCTIONS. They invoke
#		      the corresponding function in that file if the user did
#		      not specify "nolock" on the runline.
#
my_mutex_on() {
    [ -n "$nolock" ] || { mutex_on; have_mutex=Yes; }
}

my_mutex_off() {
    [ -n "$have_mutex" ] && { mutex_off; have_mutex=; }
}

#
# Message to stderr
#
error_message() # $* = Error Message
{
   echo "   $@" >&2
}

#
# Fatal error -- stops the firewall after issuing the error message
#
fatal_error() # $* = Error Message
{
    echo "   Error: $@" >&2
    if [ $COMMAND = check ]; then
	[ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
    else
	stop_firewall
    fi
    exit 2
}

#
# Fatal error during startup -- generate an error message and abend without
#				altering the state of the firewall
#
startup_error() # $* = Error Message
{
    echo "   Error: $@" >&2
    my_mutex_off
    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
    [ -n "$RESTOREBASE" ] && rm -f $RESTOREBASE
    kill $$
    exit 2
}

#
# Send a message to STDOUT and the System Log
#
report () { # $* = message
    echo "$@"
    logger "$@"
}

#
# Write the passed args to $RESTOREBASE
#
save_command() 
{
    echo "$@" >> $RESTOREBASE
}

#
# Write a progress_message command to $RESTOREBASE
#
save_progress_message() 
{
    
    echo                           >> $RESTOREBASE
    echo "progress_message \"$@\"" >> $RESTOREBASE
    echo                           >> $RESTOREBASE
}

#
# Save the passed command in the restore script then run it -- returns the status of the command
# If the command involves file redirection then it must be enclosed in quotes as in:
#
#     run_and_save_command "echo 1 > /proc/sys/net/ipv4/ip_forward"
#
run_and_save_command() 
{
    echo "$@" >> $RESTOREBASE
    eval $*
}

#
# Run the passed command and if it succeeds, save it in the restore script. If it fails, stop the firewall and die
#
ensure_and_save_command() 
{
    if eval $* ; then
	echo "$@" >> $RESTOREBASE
    else
	[ -z "$stopping" ] && { stop_firewall; exit 2; }
    fi
}
    
#
# Append a file in $STATEDIR to $RESTOREBASE
#
append_file() # $1 = File Name
{
    save_command "cat > $STATEDIR/$1 << __EOF__"
    cat $STATEDIR/$1 >> $RESTOREBASE
    save_command __EOF__
}

#
# Run iptables and if an error occurs, stop the firewall and quit
#
run_iptables() {

    [ -n "$BRIDGING" ]      && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
    [ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange

    if ! $IPTABLES $@ ; then
	if [ -z "$stopping" ]; then
	    error_message "ERROR: Command \"$IPTABLES $@\" Failed"
	    stop_firewall
	    exit 2
	fi
    fi
}

#
# Version of 'run_iptables' that inserts white space after "!" in the arg list
#
run_iptables2() {

    case "$@" in
	*!*)
	    run_iptables $(fix_bang $@)
	    ;;
	*)
	    run_iptables $@
	    ;;
    esac

}

#
# Quietly run iptables
#
qt_iptables() {

    [ -n "$BRIDGING" ]      && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
    [ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange

    qt $IPTABLES $@
}

#
# Run ip and if an error occurs, stop the firewall and quit
#
run_ip() {
    if ! ip $@ ; then
	if [ -z "$stopping" ]; then
	    error_message "ERROR: Command \"ip $@\" Failed"
	    stop_firewall
	    exit 2
	fi
    fi
}

#
# Run tc and if an error occurs, stop the firewall and quit
#
run_tc() {
    if ! tc $@ ; then
	if [ -z "$stopping" ]; then
	    error_message "ERROR: Command \"tc $@\" Failed"
	    stop_firewall
	    exit 2
	fi
    fi
}

#
# Run ipset and if an error occurs, stop the firewall and quit
#
run_ipset() {
    if ! ipset $@ ; then
	if [ -z "$stopping" ]; then
	    error_message "ERROR: Command \"ipset $@\" Failed"
	    stop_firewall
	    exit 2
	fi
    fi
}

#
# Create a filter chain
#
# If the chain isn't one of the common chains then add a rule to the chain
# allowing packets that are part of an established connection. Create a
# variable exists_${1} and set its value to Yes to indicate that the chain now
# exists.
#
createchain() # $1 = chain name, $2 = If "yes", create default rules
{
    local c=$(chain_base $1)

    run_iptables -N $1

    if [ $2 = yes ]; then
	run_iptables -A $1 -m state --state ESTABLISHED,RELATED -j ACCEPT
	[ -z "$NEWNOTSYN" ] && \
	    run_iptables -A $1 -m state --state NEW -p tcp ! --syn -j newnotsyn
    fi

    eval exists_${c}=Yes
}

createchain2() # $1 = chain name, $2 = If "yes", create default rules
{
    local c=$(chain_base $1)

    if $IPTABLES -N $1; then

	if [ $2 = yes ]; then
	    run_iptables -A $1 -m state --state ESTABLISHED,RELATED -j ACCEPT
	    [ -z "$NEWNOTSYN" ] && \
		run_iptables -A $1 -m state --state NEW -p tcp ! --syn -j newnotsyn
	fi
	
	eval exists_${c}=Yes
    fi
}

#
# Determine if a chain exists
#
# When we create a chain "chain", we create a variable named exists_chain and
# set its value to Yes. This function tests for the "exists_" variable
# corresponding to the passed chain having the value of "Yes".
#
havechain() # $1 = name of chain
{
    local c=$(chain_base $1)

    eval test \"\$exists_${c}\" = Yes
}

#
# Query NetFilter about the existence of a filter chain
#
chain_exists() # $1 = chain name
{
    qt $IPTABLES -L $1 -n
}

#
# Query NetFilter about the existence of a mangle chain
#
mangle_chain_exists() # $1 = chain name
{
    qt $IPTABLES -t mangle -L $1 -n
}

#
# Ensure that a chain exists (create it if it doesn't)
#
ensurechain() # $1 = chain name
{
    havechain $1 || createchain $1 yes
}

ensurechain1() # $1 = chain name
{
    havechain $1 || createchain $1 no
}

#
# Add a rule to a chain creating the chain if necessary
#
addrule() # $1 = chain name, remainder of arguments specify the rule
{
    ensurechain $1
    run_iptables -A $@
}

addrule2() # $1 = chain name, remainder of arguments specify the rule
{
    ensurechain $1
    run_iptables2 -A $@
}

#
# Create a nat chain
#
# Create a variable exists_nat_${1} and set its value to Yes to indicate that
# the chain now exists.
#
createnatchain() # $1 = chain name
{
    run_iptables -t nat -N $1

    eval exists_nat_${1}=Yes
}

#
# Determine if a nat chain exists
#
# When we create a chain "chain", we create a variable named exists_nat_chain
# and set its value to Yes. This function tests for the "exists_" variable
# corresponding to the passed chain having the value of "Yes".
#
havenatchain() # $1 = name of chain
{
    eval test \"\$exists_nat_${1}\" = Yes
}

#
# Ensure that a nat chain exists (create it if it doesn't)
#
ensurenatchain() # $1 = chain name
{
    havenatchain $1 || createnatchain $1
}

#
# Add a rule to a nat chain creating the chain if necessary
#
addnatrule() # $1 = chain name, remainder of arguments specify the rule
{
    ensurenatchain $1
    run_iptables2 -t nat -A $@
}

#
# Delete a chain if it exists
#
deletechain() # $1 = name of chain
{
    qt $IPTABLES -L $1 -n && qt $IPTABLES -F $1 && qt $IPTABLES -X $1
}

#
# Determine if a chain is a policy chain
#
is_policy_chain() # $1 = name of chain
{
    eval test \"\$${1}_is_policy\" = Yes
}

#
# Set a standard chain's policy
#
setpolicy() # $1 = name of chain, $2 = policy
{
    run_iptables -P $1 $2
}

#
# Set a standard chain to enable established and related connections
#
setcontinue() # $1 = name of chain
{
    run_iptables -A $1 -m state --state ESTABLISHED,RELATED -j ACCEPT
}

#
# Flush one of the NAT table chains
#
flushnat() # $1 = name of chain
{
    run_iptables -t nat -F $1
}

#
# Flush one of the Mangle table chains
#
flushmangle() # $1 = name of chain
{
    run_iptables -t mangle -F $1
}

#
# Find interfaces to a given zone
#
# Search the variables representing the contents of the interfaces file and
# for each record matching the passed ZONE, echo the expanded contents of
# the "INTERFACE" column
#
find_interfaces() # $1 = interface zone
{
    local zne=$1
    local z
    local interface

    for interface in $ALL_INTERFACES; do
	eval z=\$$(chain_base $interface)_zone
	[ "x${z}" = x${zne} ] && echo $interface
    done
}

#
# Forward Chain for an interface
#
forward_chain() # $1 = interface
{
   echo $(chain_base $1)_fwd
}

#
# Input Chain for an interface
#
input_chain() # $1 = interface
{
   echo $(chain_base $1)_in
}

#
# Output Chain for an interface
#
output_chain() # $1 = interface
{
   echo $(chain_base $1)_out
}

#
# Masquerade Chain for an interface
#
masq_chain() # $1 = interface
{
   echo $(chain_base $1)_masq
}

#
# MAC Verification Chain for an interface
#
mac_chain() # $1 = interface
{
   echo $(chain_base $1)_mac
}

macrecent_target() # $1 - interface
{
    [ -n "$MACLIST_TTL" ] && echo $(chain_base $1)_rec || echo RETURN
}

#
# Functions for creating dynamic zone rules
#
dynamic_fwd() # $1 = interface
{
   echo $(chain_base $1)_dynf
}

dynamic_in() # $1 = interface
{
   echo $(chain_base $1)_dyni
}

dynamic_out() # $1 = interface
{
   echo $(chain_base $1)_dyno
}

dynamic_chains() #$1 = interface
{
   local c=$(chain_base $1)

   echo ${c}_dyni ${c}_dynf ${c}_dyno
}

#
# DNAT Chain from a zone
#
dnat_chain() # $1 = zone
{
   echo ${1}_dnat
}

#
# SNAT Chain to a zone or from an interface
#
snat_chain() # $1 = zone or interface
{
   echo $(chain_base $1)_snat
}

#
# ECN Chain to an interface
#
ecn_chain() # $1 = interface
{
   echo $(chain_base $1)_ecn
}

#
# First chains for an interface
#
first_chains() #$1 = interface
{
   local c=$(chain_base $1)

   echo ${c}_fwd ${c}_in
}

#
# Horrible hack to work around an iptables limitation
#
iprange_echo() 
{
    if [ -f $TMP_DIR/iprange ]; then
	echo $@
    else
	echo "-m iprange $@"
	> $TMP_DIR/iprange
    fi
}

#
# Get set flags (ipsets).
#
get_set_flags() # $1 = set name and optional [levels], $2 = src or dst
{
    local temp setname options=$2

    case $1 in
	*\[[1-6]\])
            temp=${1#*\[}
	    temp=${temp%\]}
	    setname=${1%\[*}
	    while [ $temp -gt 1 ]; do
	       options="$options,$2"
	       temp=$(($temp - 1))
	    done	
	    echo "--set ${setname#+} $options"
	    ;;
	*\[*\])
            temp=${1#*\[}
	    temp=${temp%\]}
	    setname=${1%\[*}
	    echo "--set ${setname#+} $temp"
	    ;;
	*)
	    echo "--set ${1#+} $2"
	    ;;
    esac
}	               

#
# Source IP range
#
source_ip_range() # $1 = Address or Address Range
{
    case $1 in
	*.*.*.*-*.*.*.*)
	    case $1 in
		!*)
		    iprange_echo "! --src-range ${1#!}"
		    ;;
		*)
		    iprange_echo "--src-range $1"
		    ;;
	    esac
	    ;;
	!+*)
	    echo "-m set ! $(get_set_flags ${1#!} src)"
	    ;;
	+*)
	    echo "-m set $(get_set_flags $1 src)"
	    ;;
	*)
	    echo "-s $1"
	    ;;
    esac
}

#
# Destination IP range
#
dest_ip_range() # $1 = Address or Address Range
{
    case $1 in
	*.*.*.*-*.*.*.*)
	    case $1 in
		!*)
		    iprange_echo "! --dst-range ${1#!}"
		    ;;
		*)
		    iprange_echo "--dst-range $1"
		    ;;
	    esac
	    ;;
	!+*)
	    echo "-m set ! $(get_set_flags ${1#!} dst)"
	    ;;
	+*)
	    echo "-m set $(get_set_flags $1 dst)"
	    ;;
	*)
	    echo "-d $1"
	    ;;
    esac
}

both_ip_ranges() # $1 = Source address or range, $2 = dest address or range
{
    local rangeprefix= setprefix= rangematch= setmatch=

    case $1 in 
	*.*.*.*-*.*.*.*)
	    rangeprefix="-m iprange"
	    rangematch="--src-range $1"
	    ;;
	!+*)
	    setprefix="-m set"
	    setmatch="! $(get_set_flags ${1#!} src)"
	    ;;
	+*)
	    setprefix="-m set"
	    setmatch="$(get_set_flags $1 src)"
	    ;;
	*)
	    rangematch="-s $1"
	    ;;
    esac

    case $2 in 
	*.*.*.*-*.*.*.*)
	    rangeprefix="-m iprange"
	    rangematch="$rangematch --dst-range $2"
	    ;;
	!+*)
	    setprefix="-m set"
	    match="$setmatch ! $(get_set_flags ${2#!} dst)"
	    ;;
	+*)
	    setprefix="-m set"
	    setmatch="$setmatch $(get_set_flags $2 dst)"
	    ;;
	*)
	    rangematch="$rangematch -d $2"
	    ;;
    esac

    echo "$rangeprefix $rangematch $setprefix $setmatch"
}    

#
# Horrible hack to work around an iptables limitation
#
physdev_echo() 
{
    if [ -f $TMP_DIR/physdev ]; then
	echo $@
    else
	echo -m physdev $@
	> $TMP_DIR/physdev
    fi
}

#
# We allow hosts to be specified by IP address or by physdev. These two functions
# are used to produce the proper match in a netfilter rule.
#
match_source_hosts()
{
    if [ -n "$BRIDGING" ]; then
	case $1 in
	    *:*)
		physdev_echo "--physdev-in ${1%:*} $(source_ip_range ${1#*:})"
		;;
	    *.*.*.*|+*|!+*)
		echo $(source_ip_range $1)
		;;
	    *)
		physdev_echo "--physdev-in $1"
		;;
	esac
    else
	echo $(source_ip_range $1)
    fi
}

match_dest_hosts()
{
    if [ -n "$BRIDGING" ]; then
	case $1 in
	    *:*)
		physdev_echo "--physdev-out ${1%:*} $(dest_ip_range ${1#*:})"
		;;
	    *.*.*.*|+*|!+*)
		echo $(dest_ip_range $1)
		;;
	    *)
		physdev_echo "--physdev-out $1"
		;;
	esac
    else
	echo $(dest_ip_range $1)
    fi
}

#
# Similarly, the source or destination in a rule can be qualified by a device name. If 
# the device is defined in /etc/shorewall/interfaces then a normal interface match is
# generated (-i or -o); otherwise, a physdev match is generated.
#-------------------------------------------------------------------------------------
#
# loosely match the passed interface with those in /etc/shorewall/interfaces.
#
known_interface() # $1 = interface name
{
    local iface

    for iface in $ALL_INTERFACES ; do
	if if_match $iface $1 ; then
	    return 0
	fi
    done

    return 1
}

match_source_dev()
{
    if [ -n "$BRIDGING" ]; then
	list_search $1 $all_ports && physdev_echo "--physdev-in $1" || echo -i $1
    else
	echo -i $1
    fi
}

match_dest_dev()
{
    if [ -n "$BRIDGING" ]; then
	list_search $1 $all_ports && physdev_echo "--physdev-out $1" || echo -o $1
    else
	echo -o $1
    fi
}

verify_interface()
{
    known_interface $1 || { [ -n "$BRIDGING" ] && list_search $1 $all_ports ; }
}

#
# Determine if communication to/from a host is encrypted using IPSEC
#
is_ipsec_host() # $1 = zone, $2 = host
{
    eval local is_ipsec=\$${1}_is_ipsec
    eval local hosts=\"\$${1}_ipsec_hosts\"

    test -n "$is_ipsec" || list_search $2 $hosts
}

#
# Generate a match for decrypted packets
#
match_ipsec_in() # $1 = zone, $2 = host
{
    if is_ipsec_host $1 $2 ; then
	eval local options=\"\$${1}_ipsec_options \$${1}_ipsec_in_options\"
	echo "-m policy --pol ipsec --dir in $options"
    elif [ -n "$POLICY_MATCH" ]; then
	echo "-m policy --pol none --dir in"
    fi
}

#
# Generate a match for packets that will be encrypted
#
match_ipsec_out() # $1 = zone, $2 = host
{
    if is_ipsec_host $1 $2 ; then
	eval local options=\"\$${1}_ipsec_options \$${1}_ipsec_out_options\"
	echo "-m policy --pol ipsec --dir out $options"
    elif [ -n "$POLICY_MATCH" ]; then
	echo "-m policy --pol none --dir out"
    fi
}

#
# Jacket for ip_range() that takes care of iprange match
#

firewall_ip_range() # $1 = IP address or range
{
    [ -n "$IPRANGE_MATCH" ] && echo $1 || ip_range $1
}

#
#
# Find hosts in a given zone
#
# Read hosts file and for each record matching the passed ZONE,
# echo the expanded contents of the "HOST(S)" column
#
find_hosts() # $1 = host zone
{
    local hosts interface address addresses

    while read z hosts options; do
	if [ "x$(expand $z)" = "x$1" ]; then
	    expandv hosts
	    interface=${hosts%%:*}
	    addresses=${hosts#*:}
	    for address in $(separate_list $addresses); do 
		echo $interface:$address
	    done
	fi
    done < $TMP_DIR/hosts
}

#
# Check for duplicate zone definitions
#
check_duplicate_zones() {
    local localzones=

    for zone in $zones; do
	list_search $zone $localzones && startup_error "Zone $zone is defined more than once"
	localzones="$localzones $zone"
    done
}
#
# Determine the interfaces on the firewall
#
# For each zone, create a variable called ${zone}_interfaces. This
# variable contains a space-separated list of interfaces to the zone
#
determine_interfaces() {
    for zone in $zones; do
	interfaces=$(find_interfaces $zone)
	interfaces=$(echo $interfaces) # Remove extra trash
	eval ${zone}_interfaces=\"\$interfaces\"
    done
}

#
# Determine if an interface has a given option
#
interface_has_option() # $1 = interface, #2 = option
{
    local options

    eval options=\$$(chain_base $1)_options

    list_search $2 $options
}

#
# Determine the defined hosts in each zone and generate report
#
determine_hosts() {

    for zone in $zones; do
	hosts=$(find_hosts $zone)
	hosts=$(echo $hosts) # Remove extra trash

	eval interfaces=\$${zone}_interfaces

	for interface in $interfaces; do
	    if interface_has_option $interface detectnets; then
		networks=$(get_routed_networks $interface)
	    else
		networks=0.0.0.0/0
	    fi

	    for networks in $networks; do
		if [ -z "$hosts" ]; then
		    hosts=$interface:$networks
		else
		    hosts="$hosts $interface:$networks"
		fi

		if interface_has_option $interface routeback; then
		    eval ${zone}_routeback=\"$interface:$networks \$${zone}_routeback\"
		fi
	    done
	done

	interfaces=

	for host in $hosts; do
	    interface=${host%:*}
	    if list_search $interface $interfaces; then
		list_search $interface:0.0.0.0/0 $hosts && \
		    startup_error "Invalid zone definition for zone $zone"
		list_search $interface:0/0 $hosts && \
		    startup_error "Invalid zone definition for zone $zone"
		eval ${zone}_is_complex=Yes
	    else
		if [ -z "$interfaces" ]; then
		    interfaces=$interface
		else
		    interfaces="$interfaces $interface"
		fi
	    fi
	done

	eval ${zone}_interfaces="\$interfaces"
	eval ${zone}_hosts="\$hosts"

	if [ -n "$hosts" ]; then
	    eval display=\$${zone}_display
	    display_list "$display Zone:" $hosts
	else
	    error_message "Warning: Zone $zone is empty"
	fi
    done
}

#
# Ensure that the passed zone is defined in the zones file or is the firewall
#
validate_zone() # $1 = zone
{
    list_search $1 $zones $FW
}
#
# Ensure that the passed zone is defined in the zones file.
#
validate_zone1() # $1 = zone
{
    list_search $1 $zones
}

#
# Validate the zone names and options in the interfaces file
#
validate_interfaces_file() {
    local wildcard
    local found_obsolete_option=
    local z interface networks options r iface option

    while read z interface networks options; do
	expandv z interface networks options
	r="$z $interface $networks $options"

	[ "x$z" = "x-" ] && z=

	if [ -n "$z" ]; then
	    validate_zone $z || startup_error "Invalid zone ($z) in record \"$r\""
	fi

	list_search $interface $ALL_INTERFACES && \
	    startup_error "Duplicate Interface $interface"

	wildcard=

	case $interface in
	    *:*|+)
		startup_error "Invalid Interface Name: $interface"
		;;
	    *+)
		wildcard=Yes
		;;
	esac

	ALL_INTERFACES="$ALL_INTERFACES $interface"
	options=$(separate_list $options)
	iface=$(chain_base $interface)

	eval ${iface}_broadcast="$networks"
	eval ${iface}_zone="$z"
	eval ${iface}_options=\"$options\"

	for option in $options; do
	    case $option in
		dhcp|norfc1918|nobogons|tcpflags|newnotsyn|arp_filter|routefilter|logmartians|sourceroute|blacklist|proxyarp|maclist|nosmurfs|upnp|-)
		    ;;
		detectnets)
		    [ -n "$wildcard" ] && \
			startup_error "The \"detectnets\" option may not be used with a wild-card interface"
		    ;;
		routeback)
		    [ -n "$z" ] || startup_error "The routeback option may not be specified on a multi-zone interface"
		    ;;
		*)
		    error_message "Warning: Invalid option ($option) in record \"$r\""
		    ;;
	    esac
	done

	[ -z "$ALL_INTERFACES" ] && startup_error "No Interfaces Defined"

    done < $TMP_DIR/interfaces
}

#
# Validate the zone names and options in the hosts file
#
validate_hosts_file() {
   local z hosts options r interface host option port ports

   check_bridge_port() 
   {
       list_search $1 $ports || ports="$ports $1"
       list_search ${interface}:${1} $zports || zports="$zports ${interface}:${1}"
       list_search $1 $all_ports || all_ports="$all_ports $1"
   }

   while read z hosts options; do
       expandv z hosts options
       r="$z $hosts $options"
       validate_zone1 $z || startup_error "Invalid zone ($z) in record \"$r\""

       case $hosts in
	   *:*)

	       interface=${hosts%%:*}
	       iface=$(chain_base $interface)

	       list_search  $interface $ALL_INTERFACES || \
		   startup_error "Unknown interface ($interface) in record \"$r\""

	       hosts=${hosts#*:}
	       ;;
	   *)
	       fatal_error "Invalid HOST(S) column contents: $hosts"
	       ;;
       esac

       eval ports=\$${iface}_ports
       eval zports=\$${z}_ports
		
       for host in $(separate_list $hosts); do
	   if [ -n "$BRIDGING" ]; then
	       case $host in
		   *:*)
		       known_interface ${host%:*} && \
			   startup_error "Bridged interfaces may not be defined in /etc/shorewall/interfaces: $host"
		       check_bridge_port ${host%%:*}
		       ;;
		   *.*.*.*|+*)
		       ;;
		   *)
		       known_interface $host && \
			   startup_error "Bridged interfaces may not be defined in /etc/shorewall/interfaces: $host"
		       check_bridge_port $host
		       ;;
	       esac
	   fi

	   for option in $(separate_list $options) ; do
	       case $option in
		   maclist|norfc1918|nobogons|blacklist|tcpflags|nosmurfs|newnotsyn|-)
		       ;;
		   ipsec)
		       [ -n "$POLICY_MATCH" ] || \
			   startup_error "Your kernel and/or iptables does not support policy match: ipsec"
		       eval ${z}_ipsec_hosts=\"\$${z}_ipsec_hosts $interface:$host\"
		       eval ${z}_is_complex=Yes
		       ;;
		   routeback)
		       [ -z "$ports" ] && \
			   eval ${z}_routeback=\"$interface:$host \$${z}_routeback\"
		       ;;
		   *)
		       error_message "Warning: Invalid option ($option) in record \"$r\""
		       ;;
	       esac
	   done
       done

       if [ -n "$ports" ]; then
	   eval ${iface}_ports=\"$ports\"
	   eval ${z}_ports=\"$zports\"
       fi
       
   done < $TMP_DIR/hosts

   [ -n "$all_ports" ] && echo "   Bridge ports are: $all_ports"
}

#
# Format a match by the passed MAC address
# The passed address begins with "~" and uses "-" as a separator between bytes
# Example: ~01-02-03-04-05-06
#
mac_match() # $1 = MAC address formated as described above
{
    echo "--match mac --mac-source $(echo $1 | sed 's/~//;s/-/:/g')"
}

#
# validate the policy file
#
validate_policy()
{
    local clientwild
    local serverwild
    local zone
    local zone1
    local pc
    local chain
    local policy
    local loglevel
    local synparams

    print_policy() # $1 = source zone, $2 = destination zone
    {
	[ $COMMAND != check ] || \
	    [ $1 = $2 ]  || \
	    [ $1 = all ] || \
	    [ $2 = all ] || \
	    progress_message "   Policy for $1 to $2 is $policy using chain $chain"
    }

    all_policy_chains=

    strip_file policy

    while read client server policy loglevel synparams; do
	expandv client server policy loglevel synparams

	clientwild=
	serverwild=

	case "$client" in
	all|ALL)
	    clientwild=Yes
	    ;;
	*)
	    if ! validate_zone $client; then
		startup_error "Undefined zone $client"
	    fi
	esac

	case "$server" in
	all|ALL)
	    serverwild=Yes
	    ;;
	*)
	    if ! validate_zone $server; then
		startup_error "Undefined zone $server"
	    fi
	esac

	case $policy in
	ACCEPT|REJECT|DROP|CONTINUE|QUEUE)
	    ;;
	NONE)
	    [ "$client" = "$FW" -o "$server" = "$FW" ] && \
		startup_error " $client $server $policy $loglevel $synparams: NONE policy not allowed to/from the $FW zone"

	    [ -n "$clientwild" -o -n "$serverwild" ] && \
		startup_error " $client $server $policy $loglevel $synparams: NONE policy not allowed with \"all\""
	    ;;
	*)
	    startup_error "Invalid policy $policy"
	    ;;
	esac

	chain=${client}2${server}

	if is_policy_chain $chain ; then
	    startup_error "Duplicate policy $policy"
	fi

	[ "x$loglevel" = "x-" ] && loglevel=

	[ $policy = NONE ] || all_policy_chains="$all_policy_chains $chain"

	eval ${chain}_is_policy=Yes
	eval ${chain}_policy=$policy
	eval ${chain}_loglevel=$loglevel
	eval ${chain}_synparams=$synparams

	if [ -n "${clientwild}" ]; then
	    if [ -n "${serverwild}" ]; then
		for zone in $zones $FW all; do
		    for zone1 in $zones $FW all; do
			eval pc=\$${zone}2${zone1}_policychain

			if [ -z "$pc" ]; then
			    eval ${zone}2${zone1}_policychain=$chain
			    eval ${zone}2${zone1}_policy=$policy
			    print_policy $zone $zone1
			fi
		    done
		done
	    else
		for zone in $zones $FW all; do
		    eval pc=\$${zone}2${server}_policychain

		    if [ -z "$pc" ]; then
			eval ${zone}2${server}_policychain=$chain
			eval ${zone}2${server}_policy=$policy
			print_policy $zone $server
		    fi
		done
	    fi
	elif [ -n "$serverwild" ]; then
	    for zone in $zones $FW all; do
		eval pc=\$${client}2${zone}_policychain

		    if [ -z "$pc" ]; then
			eval ${client}2${zone}_policychain=$chain
			eval ${client}2${zone}_policy=$policy
			print_policy $client $zone
		    fi
	    done
	else
	    eval ${chain}_policychain=${chain}
	    print_policy $client $server
	fi

    done < $TMP_DIR/policy
}

#
# Find broadcast addresses
#
find_broadcasts() {
    for interface in $ALL_INTERFACES; do
	eval bcast=\$$(chain_base $interface)_broadcast
	if [ "x$bcast" = "xdetect" ]; then
	    ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
	elif [ "x${bcast}" != "x-" ]; then
	    echo $(separate_list $bcast)
	fi
    done
}

#
# Find interface address--returns the first IP address assigned to the passed
# device
#
find_first_interface_address() # $1 = interface
{
    #
    # get the line of output containing the first IP address
    #
    addr=$(ip -f inet addr show $1 2> /dev/null | grep inet | head -n1)
    #
    # If there wasn't one, bail out now
    #
    [ -n "$addr" ] || fatal_error "Can't determine the IP address of $1"
    #
    # Strip off the trailing VLSM mask (or the peer IP in case of a P-t-P link)
    # along with everything else on the line
    #
    echo $addr | sed 's/inet //;s/\/.*//;s/ peer.*//'
}

#
# Find interfaces that have the passed option specified
#
find_interfaces_by_option() # $1 = option
{
    for interface in $ALL_INTERFACES; do
	eval options=\$$(chain_base $interface)_options
	list_search $1 $options && echo $interface
    done
}

#
# Find hosts with the passed option
#
find_hosts_by_option() # $1 = option
{
    local ignore hosts interface address addresses options ipsec= list

    while read ignore hosts options; do
	expandv options
	list=$(separate_list $options)
	if list_search $1 $list; then
	    list_search ipsec $list && ipsec=ipsec || ipsec=none
	    expandv hosts
	    interface=${hosts%%:*}
	    addresses=${hosts#*:}
	    for address in $(separate_list $addresses); do 
		echo ${ipsec}^$interface:$address
	    done
	fi
    done < $TMP_DIR/hosts

    for interface in $ALL_INTERFACES; do
	interface_has_option $interface $1 && \
	    echo none^${interface}:0.0.0.0/0
    done
}

#
# Flush and delete all user-defined chains in the filter table
#
deleteallchains() {
    run_iptables -F
    run_iptables -X
}

#
# Source a user exit file if it exists
#
run_user_exit() # $1 = file name
{
    local user_exit=$(find_file $1)

    if [ -f $user_exit ]; then
	progress_message "Processing $user_exit ..."
	. $user_exit
    fi
}

#
# Add a logging rule.
#
log_rule_limit() # $1 = log level, $2 = chain, $3 = display Chain $4 = disposition , $5 = rate limit $6=log tag $7=command $... = predicates for the rule
{
    local level=$1
    local chain=$2
    local displayChain=$3
    local disposition=$4
    local rulenum=
    local limit="${5:-$LOGLIMIT}"
    local tag=${6:+$6 }
    local command=${7:--A}
    local prefix
    local base=$(chain_base $displayChain)

    shift;shift;shift;shift;shift;shift;shift

    if [ -n "$tag" -a -n "$LOGTAGONLY" ]; then
	displayChain=$tag
	tag=
    fi

    if [ -n "$LOGRULENUMBERS" ]; then
	eval rulenum=\$${base}_logrules

	rulenum=${rulenum:-1}

	prefix="$(printf "$LOGFORMAT" $displayChain $rulenum $disposition)${tag}"

	rulenum=$(($rulenum + 1))
	eval ${base}_logrules=$rulenum
    else
	prefix="$(printf "$LOGFORMAT" $displayChain $disposition)${tag}"
    fi

    if [ ${#prefix} -gt 29 ]; then
	prefix="$(echo $prefix | truncate 29)"
	error_message "Warning: Log Prefix shortened to \"$prefix\""
    fi

    case $level in
	ULOG)
	    if ! $IPTABLES $command $chain $@ $limit -j ULOG $LOGPARMS --ulog-prefix "$prefix" ; then
		if [ -z "$stopping" ]; then
		    error_message "ERROR: Command \"$IPTABLES $command $chain $@ $limit -j ULOG $LOGPARMS --ulog-prefix \"$prefix\"\" Failed"
		    stop_firewall
		    exit 2
		fi
	    fi
	    ;;
	*)
	    if ! $IPTABLES $command $chain $@ $limit -j LOG $LOGPARMS --log-level $level --log-prefix "$prefix"; then
		if [ -z "$stopping" ]; then
		    error_message "ERROR: Command \"$IPTABLES $command $chain $@ $limit -j  LOG $LOGPARMS --log-level $level --log-prefix \"$prefix\"\" Failed"
		    stop_firewall
		    exit 2
		fi
	    fi
	    ;;
    esac
	
    if [ $? -ne 0 ] ; then
	[ -z "$stopping" ] && { stop_firewall; exit 2; }
    fi
}

log_rule() # $1 = log level, $2 = chain, $3 = disposition , $... = predicates for the rule
{
    local level=$1
    local chain=$2
    local disposition=$3

    shift;shift;shift

    log_rule_limit $level $chain $chain $disposition "$LOGLIMIT" "" -A $@
}

#
# Set /proc/sys/net/ipv4/ip_forward based on $IP_FORWARDING
#
setup_forwarding() {

    save_progress_message "Restoring IP Forwarding..."

    case "$IP_FORWARDING" in
    [Oo][Nn])
	run_and_save_command "echo 1 > /proc/sys/net/ipv4/ip_forward"
	echo "IP Forwarding Enabled"
	;;
    [Oo][Ff][Ff])
	run_and_save_command "echo 0 > /proc/sys/net/ipv4/ip_forward"
	echo "IP Forwarding Disabled!"
	;;
    esac
}

#
# Disable IPV6
#
disable_ipv6() {
    local foo="$(ip -f inet6 addr ls 2> /dev/null)"

    if [ -n "$foo" ]; then
	if qt which ip6tables; then
	    save_progress_message "Disabling IPV6..."
	    ip6tables -P FORWARD DROP && save_command ip6tables -P FORWARD DROP
	    ip6tables -P INPUT DROP   && save_command ip6tables -P INPUT DROP
	    ip6tables -P OUTPUT DROP  && save_command ip6tables -P OUTPUT DROP
	else
	    error_message "WARNING: DISABLE_IPV6=Yes in shorewall.conf but this system does not appear to have ip6tables"
	fi
    fi
}

disable_ipv6_1() {
    local foo="$(ip -f inet6 addr ls 2> /dev/null)"

    if [ -n "$foo" ]; then
	if qt which ip6tables; then
	    progress_message "Disabling IPV6..."
	    ip6tables -P FORWARD DROP
	    ip6tables -P INPUT DROP
	    ip6tables -P OUTPUT DROP
	else
	    error_message "WARNING: DISABLE_IPV6=Yes in shorewall.conf but this system does not appear to have ip6tables"
	fi
    fi
}

#
# Process the routestopped file either adding or deleting rules
#

process_routestopped() # $1 = command
{
    local hosts= interface host host1 options networks

    while read interface host options; do
	expandv interface host options
	[ "x$host" = "x-" -o -z "$host" ] && host=0.0.0.0/0
	for h in $(separate_list $host); do
	    hosts="$hosts $interface:$h"
	done

	routeback=

	if [ -n "$options" ]; then
	    for option in $(separate_list $options); do
		case $option in
		    routeback)
			if [ -n "$routeback" ]; then
			    error_message "Warning: Duplicate routestopped option ignored: routeback"
			else
			    routeback=Yes
			    for h in $(separate_list $host); do
				run_iptables $1 FORWARD -i $interface -o $interface $(both_ip_ranges $h $h) -j ACCEPT
			    done
			fi
			;;
		    *)
			error_message "Warning: Unknown routestopped option ignored: $option"
			;;
		esac
	    done
	fi
		    
    done < $TMP_DIR/routestopped

    for host in $hosts; do
	interface=${host%:*}
	networks=${host#*:}
	$IPTABLES $1 INPUT  -i $interface $(source_ip_range $networks) -j ACCEPT
	[ -z "$ADMINISABSENTMINDED" ] && \
	    run_iptables $1 OUTPUT -o $interface $(dest_ip_range $networks) -j ACCEPT

	for host1 in $hosts; do
	    [ "$host" != "$host1" ] && run_iptables $1 FORWARD -i $interface -o ${host1%:*} $(both_ip_ranges $networks ${host1#*:}) -j ACCEPT
	done
    done
}

#
# Stop the Firewall
#
stop_firewall() {
    #
    # Turn off trace unless we were tracing "stop" or "clear"
    #

    [ -n "$RESTOREBASE" ] && rm -f $RESTOREBASE

    case $COMMAND in
	stop|clear)
	    ;;
	check)
	    kill $$
	    exit 2
	    ;;
	*)
	    set +x

	    [ -z "$RESTOREFILE" ] && RESTOREFILE=restore

	    RESTOREPATH=/var/lib/shorewall/$RESTOREFILE
	    
	    if [ -x $RESTOREPATH ]; then

		if [ -x ${RESTOREPATH}-ipsets ]; then
		    echo Restoring Ipsets...
		    #
		    # We must purge iptables to be sure that there are no
		    # references to ipsets
		    #
		    iptables -F
		    iptables -X
		    ${RESTOREPATH}-ipsets
		fi

		echo Restoring Shorewall...
		$RESTOREPATH
		echo "Shorewall restored from $RESTOREPATH"
		my_mutex_off
		kill $$
		exit 2
	    fi
	    ;;
    esac

    stopping="Yes"

    terminator=

    deletechain shorewall

    run_user_exit stop

    [ -n "$MANGLE_ENABLED" ] && \
	run_iptables -t mangle -F && \
	run_iptables -t mangle -X

    [ -n "$NAT_ENABLED" ] && delete_nat
    delete_proxy_arp
    [ -n "$CLEAR_TC" ] && delete_tc1

    [ -n "$DISABLE_IPV6" ] && disable_ipv6_1

    if [ -z "$ADMINISABSENTMINDED" ]; then
	for chain in INPUT OUTPUT FORWARD; do
	    setpolicy $chain DROP
	done

	deleteallchains
    else
	for chain in INPUT FORWARD; do
	    setpolicy $chain DROP
	done

	setpolicy OUTPUT ACCEPT

	deleteallchains

	for chain in INPUT FORWARD; do
	    setcontinue $chain
	done
    fi

    hosts=

    [ -f $TMP_DIR/routestopped ] || strip_file routestopped

    process_routestopped -A

    $IPTABLES -A INPUT  -i lo -j ACCEPT
    [ -z "$ADMINISABSENTMINDED" ] && \
	$IPTABLES -A OUTPUT -o lo -j ACCEPT

    for interface in $(find_interfaces_by_option dhcp); do
	$IPTABLES -A INPUT  -p udp -i $interface --dport 67:68 -j ACCEPT
	[ -z "$ADMINISABSENTMINDED" ] && \
	    $IPTABLES -A OUTPUT -p udp -o $interface --dport 67:68 -j ACCEPT
	#
	# This might be a bridge
	#
	$IPTABLES -A FORWARD -p udp -i $interface -o $interface --dport 67:68 -j ACCEPT
    done

    case "$IP_FORWARDING" in
    [Oo][Nn])
	echo 1 > /proc/sys/net/ipv4/ip_forward
	echo "IP Forwarding Enabled"
	;;
    [Oo][Ff][Ff])
	echo 0 > /proc/sys/net/ipv4/ip_forward
	echo "IP Forwarding Disabled!"
	;;
    esac

    run_user_exit stopped

    logger "Shorewall Stopped"

    rm -rf $TMP_DIR

    case $COMMAND in
    stop|clear)
	;;
    *)
	#
	# The firewall is being stopped when we were trying to do something
	# else. Remove the lock file and Kill the shell in case we're in a
	# subshell
	#
	my_mutex_off
	kill $$
	;;
    esac
}

#
# Remove all rules and remove all user-defined chains
#
clear_firewall() {
    stop_firewall

    run_iptables -F

    echo 1 > /proc/sys/net/ipv4/ip_forward

    setpolicy INPUT ACCEPT
    setpolicy FORWARD ACCEPT
    setpolicy OUTPUT ACCEPT

    if qt which ip6tables; then
	ip6tables -P INPUT   ACCEPT 2> /dev/null
	ip6tables -P OUTPUT  ACCEPT 2> /dev/null
	ip6tables -P FORWARD ACCEPT 2> /dev/null
    fi

    run_user_exit clear

    logger "Shorewall Cleared"
}

#
# Set up ipsec tunnels
#
setup_tunnels() # $1 = name of tunnels file
{
    local inchain
    local outchain


    setup_one_ipsec() # $1 = gateway $2 = Tunnel Kind $3 = gateway zones
    {
    	local kind=$2 noah=

	case $kind in
	    *:*)
	    	noah=${kind#*:}
		[ $noah = noah -o $noah = NOAH ] || fatal_error "Invalid IPSEC modifier $noah in tunnel \"$tunnel\""
		kind=${kind%:*}
		;;
	esac

	[ $kind = IPSEC ] && kind=ipsec

	options="-m state --state NEW -j ACCEPT"
	addrule2 $inchain	  -p 50	 $(source_ip_range $1) -j ACCEPT
	addrule2 $outchain	  -p 50	 $(dest_ip_range $1)   -j ACCEPT

	if [ -z "$noah" ]; then
	    run_iptables -A $inchain  -p 51 $(source_ip_range $1) -j ACCEPT
	    run_iptables -A $outchain -p 51 $(dest_ip_range $1)   -j ACCEPT
	fi

	run_iptables -A $outchain -p udp $(dest_ip_range $1) --dport 500 $options

	if [ $kind = ipsec ]; then
	    run_iptables -A $inchain  -p udp $(source_ip_range $1) --dport 500 $options
	else
	    run_iptables -A $inchain  -p udp $(source_ip_range $1) --dport 500 $options
	    run_iptables -A $inchain  -p udp $(source_ip_range $1) --dport 4500 $options
	fi

	for z in $(separate_list $3); do
	    if validate_zone $z; then
		addrule ${FW}2${z} -p udp --dport 500 $options
		if [ $kind = ipsec ]; then
		    addrule ${z}2${FW} -p udp --dport 500 $options
		else
		    addrule ${z}2${FW} -p udp --dport 500 $options
		    addrule ${z}2${FW} -p udp --dport 4500 $options
		fi
	    else
		fatal_error "Invalid gateway zone ($z) -- Tunnel \"$tunnel\""
	    fi
	done

	progress_message "   IPSEC tunnel to $gateway defined."
    }

    setup_one_other() # $1 = TYPE, $2 = gateway, $3 = protocol
    {
	addrule2 $inchain  -p $3 $(source_ip_range $2) -j ACCEPT
	addrule2 $outchain -p $3 $(dest_ip_range $2) -j ACCEPT

	progress_message "   $1 tunnel to $2 defined."
    }

    setup_pptp_client() # $1 = gateway
    {
	addrule2 $outchain -p 47               $(dest_ip_range $1)   -j ACCEPT
	addrule2 $inchain  -p 47               $(source_ip_range $1) -j ACCEPT
	addrule2 $outchain -p tcp --dport 1723 $(dest_ip_range $1)   -j ACCEPT

	progress_message "   PPTP tunnel to $1 defined."
    }

    setup_pptp_server() # $1 = gateway
    {
	addrule2 $inchain  -p 47               $(source_ip_range $1) -j ACCEPT
	addrule2 $outchain -p 47               $(dest_ip_range $1)   -j ACCEPT
	addrule2 $inchain  -p tcp --dport 1723 $(source_ip_range $1) -j ACCEPT

	progress_message "   PPTP server defined."
    }

    setup_one_openvpn() # $1 = gateway, $2 = kind[:port]
    {
	local protocol=udp
	local p=1194

	case $2 in
	    *:*:*)
		protocol=${2%:*}
		protocol=${protocol#*:}
		p=${2##*:}
		;;
	    *:*)
		p=${2#*:}
		;;
	esac

	addrule2 $inchain  -p $protocol $(source_ip_range $1) --dport $p -j ACCEPT
	addrule2 $outchain -p $protocol $(dest_ip_range $1)   --dport $p -j ACCEPT

	progress_message "   OPENVPN tunnel to $1:$protocol:$p defined."
    }

    setup_one_generic() # $1 = gateway, $2 = kind:protocol[:port], $3 = Gateway Zone
    {
	local protocol
	local p=

	case $2 in
	    *:*:*)
		p=${2##*:}
		protocol=${2%:*}
		protocol=${protocol#*:}
		;;
	    *:*)
		protocol=${2#*:}
		;;
	    *)
		protocol=udp
		p=5000
		;;
	esac

	p=${p:+--dport $p}

	addrule2 $inchain  -p $protocol $(source_ip_range $1) $p -j ACCEPT
	addrule2 $outchain -p $protocol $(dest_ip_range $1)   $p -j ACCEPT

	for z in $(separate_list $3); do
	    if validate_zone $z; then
		addrule ${FW}2${z} -p $protocol $p -j ACCEPT
		addrule ${z}2${FW} -p $protocol $p -j ACCEPT
	    else
		error_message "Warning: Invalid gateway zone ($z)" \
		" -- Tunnel \"$tunnel\" may encounter problems"
	    fi
	done

	progress_message "   GENERIC tunnel to $1:$p defined."
    }

    strip_file tunnels $1

    while read kind z gateway z1; do
	expandv kind z gateway z1
	tunnel="$(echo $kind $z $gateway $z1)"
	if validate_zone $z; then
	    inchain=${z}2${FW}
	    outchain=${FW}2${z}
	    gateway=${gateway:-0.0.0.0/0}
	    case $kind in
		ipsec|IPSEC|ipsec:*|IPSEC:*)
		    setup_one_ipsec $gateway $kind $z1
		    ;;
		ipsecnat|IPSECNAT|ipsecnat:*|IPSECNAT:*)
		    setup_one_ipsec $gateway $kind $z1
		    ;;
		ipip|IPIP)
		    setup_one_other IPIP $gateway 4
		    ;;
		gre|GRE)
		    setup_one_other GRE $gateway 47
		    ;;
		6to4|6TO4)
		    setup_one_other 6to4 $gateway 41
		    ;;
		pptpclient|PPTPCLIENT)
		    setup_pptp_client $gateway
		    ;;
		pptpserver|PPTPSERVER) 
		    setup_pptp_server $gateway
		    ;;
		openvpn|OPENVPN|openvpn:*|OPENVPN:*)
		    setup_one_openvpn $gateway $kind
		    ;;
		generic:*|GENERIC:*)
		    setup_one_generic $gateway $kind $z1
		    ;;
		*)
		    error_message "Tunnels of type $kind are not supported:" \
			"Tunnel \"$tunnel\" Ignored"
		    ;;
	    esac
	else
	    error_message "Invalid gateway zone ($z)" \
		" -- Tunnel \"$tunnel\" Ignored"
	fi
    done < $TMP_DIR/tunnels
}

#
# Process the ipsec file
#
setup_ipsec() {
    local zone
    #
    # Add a --set-mss rule to the passed chain
    #
    set_mss1() # $1 = chain, $2 = MSS
    {
	eval local policy=\$${1}_policy

	if [ "$policy" != NONE ]; then
	    case $COMMAND in
		start|restart)
		    ensurechain $1
		    run_iptables -I $1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --set-mss $2
		;;
	    esac
	fi
    }
    #
    # Set up rules to set MSS to and/or from zone "$zone"
    #
    set_mss() # $1 = MSS value, $2 = _in, _out or ""
    {
	if [ $COMMAND != check ]; then
	    for z in $zones; do
		case $2 in
		    _in)
			set_mss1 ${zone}2${z} $1
			;;
		    _out)			
			set_mss1 ${z}2${zone} $1
			;;
		    *)
			set_mss1 ${z}2${zone} $1
			set_mss1 ${zone}2${z} $1
			;;
		esac
	    done
	fi
    }

    do_options() # $1 = _in, _out or "" - $2 = option list
    {
	local option opts newoptions= val

	[ x${2} = x- ] && return

	opts=$(separate_list $2)

	for option in $opts; do
	    val=${option#*=}

	    case $option in
		mss=[0-9]*)    set_mss $val $1 ;;					   
		strict)        newoptions="$newoptions --strict" ;;
		next)          newoptions="$newoptions --next" ;;
		reqid=*)       newoptions="$newoptions --reqid $val" ;;
		spi=*)         newoptions="$newoptions --spi $val" ;;
		proto=*)       newoptions="$newoptions --proto $val" ;;
		mode=*)        newoptions="$newoptions --mode $val" ;;
		tunnel-src=*)  newoptions="$newoptions --tunnel-src $val" ;;
		tunnel-dst=*)  newoptions="$newoptions --tunnel-dst $val" ;;
		reqid!=*)      newoptions="$newoptions ! --reqid $val" ;;
		spi!=*)        newoptions="$newoptions ! --spi $val" ;;
		proto!=*)      newoptions="$newoptions ! --proto $val" ;;
		mode!=*)       newoptions="$newoptions ! --mode $val" ;;
		tunnel-src!=*) newoptions="$newoptions ! --tunnel-src $val" ;;
		tunnel-dst!=*) newoptions="$newoptions ! --tunnel-dst $val" ;;
		*)             fatal_error "Invalid option \"$option\" for zone $zone" ;;
	    esac
	done

	if [ -n "$newoptions" ]; then
	    eval ${zone}_is_complex=Yes
	    eval ${zone}_ipsec${1}_options=\"${newoptions# }\"
	fi
    }

    strip_file ipsec $1
    
    while read zone ipsec options in_options out_options mss; do
	expandv zone ipsec options in_options out_options mss

	[ -n "$POLICY_MATCH" ] || fatal_error "Your kernel and/or iptables does not support policy match"

	validate_zone1 $zone || fatal_error "Unknown zone: $zone"

	case $ipsec in
	    -|No|no)
		;;
	    Yes|yes)
		eval ${zone}_is_ipsec=Yes
		eval ${zone}_is_complex=Yes
		;;
	    *)
		fatal_error "Invalid IPSEC column value: $ipsec"
		;;
	esac

	do_options ""     $options
	do_options "_in"  $in_options
	do_options "_out" $out_options
	    
    done < $TMP_DIR/ipsec
}	

#
# Setup Proxy ARP
#
setup_proxy_arp() {

    local setlist= resetlist=

    print_error() {
	error_message "Invalid value for HAVEROUTE - ($haveroute)"
	error_message "Entry \"$address $interface $external $haveroute\" ignored"
    }

    print_error1() {
	error_message "Invalid value for PERSISTENT - ($persistent)"
	error_message "Entry \"$address $interface $external $haveroute $persistent\" ignored"
    }

    print_warning() {
	error_message "PERSISTENT setting ignored - ($persistent)"
	error_message "Entry \"$address $interface $external $haveroute $persistent\""
    }

    setup_one_proxy_arp() {

	case $haveroute in
	[Nn][Oo])
	    haveroute=
	    ;;
	[Yy][Ee][Ss])
	    ;;
	*)
	    if [ -n "$haveroute" ]; then
		print_error
		return
	    fi
	    ;;
	esac

	case $persistent in
	[Nn][Oo])
	    persistent=
	    ;;
	[Yy][Ee][Ss])
	    [ -z "$haveroute" ] || print_warning
	    ;;
	*)
	    if [ -n "$persistent" ]; then
		print_error1
		return
	    fi
	    ;;
	esac

	if [ -z "$haveroute" ]; then
	    ensure_and_save_command ip route replace $address dev $interface
	    [ -n "$persistent" ] && haveroute=yes
	fi

	ensure_and_save_command arp -i $external -Ds $address $external pub

	echo $address $interface $external $haveroute >> ${STATEDIR}/proxyarp

	progress_message "   Host $address connected to $interface added to ARP on $external"
    }

    > ${STATEDIR}/proxyarp

    save_progress_message "Restoring Proxy ARP..."

    while read address interface external haveroute persistent; do
	expandv address interface external haveroute persistent
	list_search $interface $setlist   || setlist="$setlist $interface"
	list_search $external  $resetlist || list_search $external $setlist || resetlist="$resetlist $external"
	setup_one_proxy_arp
    done < $TMP_DIR/proxyarp

    for interface in $resetlist; do
	list_search $interface $setlist || \
	    run_and_save_command "echo 0 > /proc/sys/net/ipv4/conf/$interface/proxy_arp"
    done

    for interface in $setlist; do
	run_and_save_command "echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp"
    done

    interfaces=$(find_interfaces_by_option proxyarp)

    for interface in $interfaces; do
	if echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp 2> /dev/null; then
	    progress_message "   Enabled proxy ARP on $interface"
	    save_command "echo 1 > /proc/sys/net/ipv4/conf/$interface/proxy_arp"
        else
	    error_message "Warning: Unable to enable proxy ARP on $interface"
        fi
    done
}

#
# Set up MAC Verification
#
setup_mac_lists() {
    local interface
    local mac
    local addresses
    local address
    local chain
    local chain1
    local macpart
    local blob
    local hosts
    local ipsec
    local policy=
    #
    # Generate the list of interfaces having MAC verification
    #
    maclist_interfaces=

    for hosts in $maclist_hosts; do
	hosts=${hosts#*^}
	interface=${hosts%%:*}
	if ! list_search $interface $maclist_interfaces; then\
	    if [ -z "$maclist_interfaces" ]; then
		maclist_interfaces=$interface
	    else
		maclist_interfaces="$maclist_interfaces $interface"
	    fi
	fi
    done

    progress_message "Setting up MAC Verification on $maclist_interfaces..."
    #
    # Create chains.
    #
    for interface in $maclist_interfaces; do
	chain=$(mac_chain $interface)
	createchain $chain no
	
	if [ -n "$MACLIST_TTL" ]; then
	    chain1=$(macrecent_target $interface)
	    createchain $chain1 no
	    run_iptables -A $chain  -m recent --rcheck --seconds $MACLIST_TTL --name $chain -j $chain1
	    run_iptables -A $chain1 -m recent --update                        --name $chain -j ACCEPT
	    run_iptables -A $chain1 -m recent --set                           --name $chain -j ACCEPT
	fi
    done
    #
    # Process the maclist file producing the verification rules
    #
    while read interface mac addresses; do
	expandv interface mac addresses

	physdev_part=

	if [ -n "$BRIDGING" ]; then
	    case $interface in
		*:*)
		    physdev_part="-m physdev --physdev-in ${interface#*:}"
		    interface=${interface%:*}
		    ;;
	    esac
	fi

	chain=$(mac_chain $interface)
	chain1=$(macrecent_target $interface)

	if ! havechain $chain ; then
	    fatal_error "No hosts on $interface have the maclist option specified"
	fi

	macpart=$(mac_match $mac)

	if [ -z "$addresses" ]; then
	    run_iptables -A $chain $macpart $physdev_part -j $chain1
	else
	    for address in $(separate_list $addresses) ; do
		run_iptables2 -A $chain $macpart -s $address $physdev_part -j $chain1
	    done
	fi
    done < $TMP_DIR/maclist
    #
    # Must take care of our own broadcasts and multicasts then terminate the verification
    # chains
    #
    for interface in $maclist_interfaces; do
	chain=$(mac_chain $interface)
	chain1=$(macrecent_target $interface)

	blob=$(ip link show $interface 2> /dev/null)

	[ -z "$blob" ] && \
	    fatal_error "Interface $interface must be up before Shorewall can start"

	ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | sed 's/inet //; s/brd //; s/scope.*//;' | while read address broadcast; do
	    if [ -n "$broadcast" ]; then
		run_iptables -A $chain -s ${address%/*} -d $broadcast -j $chain1
	    fi

	    run_iptables -A $chain -s $address -d 255.255.255.255 -j $chain1
	    run_iptables -A $chain -s $address -d 224.0.0.0/4     -j $chain1
	done

	if [ -n "$MACLIST_LOG_LEVEL" ]; then
	    log_rule $MACLIST_LOG_LEVEL $chain $MACLIST_DISPOSITION 
	fi

	run_iptables -A $chain -j $maclist_target
    done
    #
    # Generate jumps from the input and forward chains
    #
    for hosts in $maclist_hosts; do
	ipsec=${hosts%^*}
	hosts=${hosts#*^}
	[ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	interface=${hosts%%:*}
	hosts=${hosts#*:}
	for chain in $(first_chains $interface) ; do
	    run_iptables -A $chain $(match_source_hosts $hosts) -m state --state NEW \
		$policy -j $(mac_chain $interface)
	done
    done
}

#
# Set up SYN flood protection
#
setup_syn_flood_chain ()
	# $1 = policy chain
	# $2 = synparams
        # $3 = loglevel
{
    local chain=@$1
    local limit=$2
    local limit_burst=

    case $limit in
	*:*)
	    limit_burst="--limit-burst ${limit#*:}"
	    limit=${limit%:*}
	    ;;
    esac

    run_iptables -N $chain
    run_iptables -A $chain -m limit --limit $limit $limit_burst -j RETURN
    [ -n "$3" ] && \
	log_rule_limit $3 $chain $chain DROP "-m limit --limit 5/min --limit-burst 5" "" ""
    run_iptables -A $chain -j DROP
}

#
# Enable SYN flood protection on a chain
#
# Insert a jump rule to the protection chain from the first chain. Inserted
# as the second rule and restrict the jump to SYN packets
#
enable_syn_flood_protection() # $1 = chain, $2 = protection chain
{
    run_iptables -I $1 2 -p tcp --syn -j @$2
    progress_message "      Enabled SYN flood protection"
}

#
# Delete existing Proxy ARP
#
delete_proxy_arp() {
    if [ -f ${STATEDIR}/proxyarp ]; then
	while read address interface external haveroute; do
	    qt arp -i $external -d $address pub
	    [ -z "$haveroute" ] && qt ip route del $address dev $interface
	done < ${STATEDIR}/proxyarp

	rm -f ${STATEDIR}/proxyarp
    fi

    [ -d ${STATEDIR} ] && touch ${STATEDIR}/proxyarp

    for f in /proc/sys/net/ipv4/conf/*; do
	[ -f $f/proxy_arp ] && echo 0 > $f/proxy_arp
    done
}

#
# Setup Static Network Address Translation (NAT)
#
setup_nat() {
    local external= interface= internal= allints= localnat= policyin= policyout=

    validate_one() #1 = Variable Name, $2 = Column name, $3 = value 
    {
	case $3 in
	    Yes|yes)
                ;;
	    No|no)
		eval ${1}=
		;;
	    *)
		[ -n "$3" ] && \
		    fatal_error "Invalid value ($3) for $2 in entry \"$external $interface $internal $allints $localnat\""
		;;
	esac
    }

    do_one_nat() {
	local add_ip_aliases=$ADD_IP_ALIASES iface=${interface%:*}
	
	if [ -n "$add_ip_aliases" ]; then
	    case $interface in
		*:)
		    interface=${interface%:}
		    add_ip_aliases=
		    ;;
		*)
		    [ -n "$RETAIN_ALIASES" ] || run_and_save_command qt ip addr del $external dev $iface
		    ;;
	    esac
	else
	    interface=${interface%:}
	fi

	validate_one allints  "ALL INTERFACES" $allints
	validate_one localnat "LOCAL"          $localnat
	
	if [ -n "$allints" ]; then
	    addnatrule nat_in  -d $external $policyin  -j DNAT --to-destination $internal
	    addnatrule nat_out -s $internal $policyout -j SNAT --to-source $external
	else
	    addnatrule $(input_chain $iface)  -d $external $policyin  -j DNAT --to-destination $internal
	    addnatrule $(output_chain $iface) -s $internal $policyout -j SNAT --to-source $external
	fi
	
	[ -n "$localnat" ] && \
	    run_iptables2 -t nat -A OUTPUT -d $external $policyout -j DNAT --to-destination $internal

	if [ -n "$add_ip_aliases" ]; then
	    list_search $external $aliases_to_add || \
		aliases_to_add="$aliases_to_add $external $interface"
	fi
    }
    #
    # At this point, we're just interested in the network translation
    #
    > ${STATEDIR}/nat

    if [ -n "$POLICY_MATCH" ]; then
	policyin="-m policy --pol none --dir in"
	policyout="-m policy --pol none --dir out"
    fi

    [ -n "$RETAIN_ALIASES" ] || save_progress_message "Restoring one-to-one NAT..."

    while read external interface internal allints localnat; do
	expandv external interface internal allints localnat
	
	do_one_nat

	progress_message "   Host $internal NAT $external on $interface"
    done < $TMP_DIR/nat
}

#
# Delete existing Static NAT
#
delete_nat() {
    run_iptables -t nat -F
    run_iptables -t nat -X

    if [ -f ${STATEDIR}/nat ]; then
	while read external interface; do
	    qt ip addr del $external dev $interface
	done < ${STATEDIR}/nat

	rm -f {$STATEDIR}/nat
    fi

    [ -d ${STATEDIR} ] && touch ${STATEDIR}/nat
}

#
# Setup Network Mapping (NETMAP)
#
setup_netmap() {
    
    while read type net1 interface net2 ; do
	expandv type net1 interface net2

	list_search $interface $ALL_INTERFACES || \
	    fatal_error "Unknown interface $interface in entry \"$type $net1 $interface $net2\""

	case $type in
	    DNAT)
		addnatrule $(input_chain $interface)  -d $net1 -j NETMAP --to $net2
		;;
	    SNAT)
		addnatrule $(output_chain $interface) -s $net1 -j NETMAP --to $net2
		;;
	    *)
		fatal_error "Invalid type $type in entry \"$type $net1 $interface $net2\""
		;;
	esac

	progress_message "   Network $net1 on $interface mapped to $net2 ($type)"

    done < $TMP_DIR/netmap
}

#
# Setup ECN disabling rules
#
setup_ecn() # $1 = file name
{
    local interfaces=""
    local hosts=
    local h

    strip_file ecn $1

    echo "Processing $1..."

    while read interface host; do
	expandv interface host
	list_search  $interface $ALL_INTERFACES || \
	    startup_error "Unknown interface $interface"
	list_search $interface $interfaces || \
	    interfaces="$interfaces $interface"
	[ "x$host" = "x-" ] && host=
	for h in $(separate_list ${host:-0.0.0.0/0}); do
	    hosts="$hosts $interface:$h"
	done
    done < $TMP_DIR/ecn

    if [ -n "$interfaces" ]; then
	progress_message "Setting up ECN control on${interfaces}..."

	for interface in $interfaces; do
	    chain=$(ecn_chain $interface)
	    if mangle_chain_exists $chain; then
		flushmangle $chain
	    else
		run_iptables -t mangle -N $chain
		run_iptables -t mangle -A POSTROUTING -p tcp -o $interface -j $chain
		run_iptables -t mangle -A OUTPUT      -p tcp -o $interface -j $chain
	    fi
	done

	for host in $hosts; do
	    interface=${host%:*}
	    h=${host#*:}
	    run_iptables -t mangle -A $(ecn_chain $interface) -p tcp $(dest_ip_range $h) -j ECN --ecn-tcp-remove
	    progress_message "   ECN Disabled to $h through $interface"
	done
    fi
}

#
# Process a TC Rule - $MARKING_CHAIN is assumed to contain the name of the
#                     default marking chain
#
process_tc_rule()
{
    chain=$MARKING_CHAIN target="MARK --set-mark" marktest=

    verify_designator() {
	[ "$chain" = tcout ] && \
	    fatal_error "Chain designator not allowed when source is \$FW; rule \"$rule\""
	chain=$1
	mark="${mark%:*}"
    }

    add_a_tc_rule() {
	r=

	if [ "x$source" != "x-"	 ]; then
	    case $source in
		*.*.*|+*|!+*)
		    r="$(source_ip_range $source) "
		    ;;
		~*)
		    r="$(mac_match $source) "
		    ;;
		$FW:*)
		    chain=tcout
		    r="$(source_ip_range ${source%:*}) " 
		    ;;
		$FW)
		    chain=tcout
		    ;;
		*)		    
		    verify_interface $source || fatal_error "Unknown interface $source in rule \"$rule\""
		    r="$(match_source_dev) $source "
		    ;;
	    esac
	fi

	if [ "x${user:--}" != "x-" ]; then

	    [ "$chain" != tcout ] && \
		fatal_error "Invalid use of a user/group: rule \"$rule\""

	    r="$r-m owner"
	    
	    case "$user" in
		*+*)
		    r="$r --cmd-owner ${user#*+} "
		    user=${user%+*}
		    ;;
	    esac

	    case "$user" in
		*:*)
		    temp="${user%:*}"
		    [ -n "$temp" ] && r="$r --uid-owner $temp " 
		    temp="${user#*:}"
		    [ -n "$temp" ] && r="$r --gid-owner $temp "
		    ;;
		*)
		    [ -n "$user" ] && r="$r --uid-owner $user "
		    ;;
	    esac
	fi

	[ -n "$marktest" ] && r="${r}-m ${marktest}--mark $testval "

	if [ "x$dest" != "x-"  ]; then
	    case $dest in
		*.*.*|+*|!+*)
		    r="${r}$(dest_ip_range $dest) "
		    ;;
		*)
		    verify_interface $dest || fatal_error "Unknown interface $dest in rule \"$rule\""
		    r="${r}$(match_dest_dev $dest) "
		    ;;
	    esac
	fi

	if [ "x$proto" = xipp2p ]; then
	    [ "x$port" = "x-" ] && port="ipp2p"
	    r="${r}-p tcp -m ipp2p --${port} "
	else
	    [ "x$proto"  = "x-"  ] && proto=all
	    [ "x$proto"  = "x"   ] && proto=all
	    [ "$proto"   = "all" ] || r="${r}-p $proto "
	    [ "x$port"   = "x-"  ] || r="${r}--dport $port "
	fi

	[ "x$sport"  = "x-"  ] || r="${r}--sport $sport "

	case $chain in
	    tcpost)
		run_iptables2 -t mangle -A tcpost $r -j CLASSIFY --set-class $mark
		;;
	    *)
		run_iptables2 -t mangle -A $chain $r -j $target $mark
		;;
	esac

    }

    if [ "$mark" != "${mark%:*}" ]; then
	case "${mark#*:}" in
	    p|P)
		verify_designator tcpre
		;;
	    cp|CP)
		verify_designator tcpre
		target="CONNMARK --set-mark"
		;;
	    f|F)
		verify_designator tcfor
		;;
	    cf|CF)
		verify_designator tcfor
		target="CONNMARK --set-mark"
		;;
	    c|C)
		target="CONNMARK --set-mark"
		mark=${mark%:*}
		;;
	    *)
		chain=tcpost
		;;
	esac
    fi

    case $mark in
	SAVE)
	    target="CONNMARK --save-mark"
	    mark=
	    ;;
	SAVE/*)
	    target="CONNMARK --save-mark --mask"
	    mark=${mark#*/}
	    ;;
	RESTORE)
	    target="CONNMARK --restore-mark"
	    mark=
	    ;;
	RESTORE/*)
	    target="CONNMARK --restore-mark --mask"
	    mark=${mark#*/}
	    ;;
	CONTINUE)
	    target=RETURN
	    mark=
	    ;;
    esac

    case $testval in
	-)
	    ;;
	!*:C)
	    marktest="connmark ! "
	    testval=${testval%:*}
	    testval=${testval#!}
	    ;;
	*:C)
	    marktest="connmark "
	    testval=${testval%:*}
	    ;;
	!*)
	    marktest="mark ! "
	    testval=${testval#!}
	    ;;
	*)
	    [ -n "$testval" ] && marktest="mark "
	    ;;
    esac

    for source in $(separate_list ${sources:=-}); do
	for dest in $(separate_list ${dests:=-}); do
	    for port in $(separate_list ${ports:=-}); do
		for sport in $(separate_list ${sports:=-}); do
		    add_a_tc_rule
		done
	    done
	done
    done

    progress_message "   TC Rule \"$rule\" added"
}

#
# Setup queuing and classes
#
setup_tc1() {
    #
    # Create the TC mangle chains
    #

    run_iptables -t mangle -N tcpre
    run_iptables -t mangle -N tcfor
    run_iptables -t mangle -N tcout
    run_iptables -t mangle -N tcpost
    #
    # Process the TC Rules File
    #
    strip_file tcrules

    while read mark sources dests proto ports sports user testval; do
	expandv mark sources dests proto ports sports user testval
	rule=$(echo "$mark $sources $dests $proto $ports $sports $user $testval")
	process_tc_rule
    done < $TMP_DIR/tcrules
    #
    # Link to the TC mangle chains from the main chains
    #

    run_iptables -t mangle -A FORWARD     -j tcfor
    run_iptables -t mangle -A PREROUTING  -j tcpre
    run_iptables -t mangle -A OUTPUT      -j tcout
    run_iptables -t mangle -A POSTROUTING -j tcpost

    f=$(find_file tcstart)

    if [ -f $f ]; then

	run_user_exit tcstart

	save_progress_message "Restoring Traffic Control..."
	save_command . $(find_file tcstart)
    fi
}

setup_tc() {

    echo "Setting up Traffic Control Rules..."

    setup_tc1
}

#
# Clear Traffic Shaping
#
delete_tc()
{

    clear_one_tc() {
	run_and_save_command "tc qdisc del dev $1 root 2> /dev/null"
	run_and_save_command "tc qdisc del dev $1 ingress 2> /dev/null" 

    }

    save_progress_message "Clearing Traffic Control/QOS"

    run_user_exit tcclear

    run_ip link list | \
    while read inx interface details; do
	case $inx in
	    [0-9]*)
		clear_one_tc ${interface%:}
		;;
	    *)
		;;
	esac
    done
}

delete_tc1()
{

    clear_one_tc() {
	tc qdisc del dev $1 root 2> /dev/null
	tc qdisc del dev $1 ingress 2> /dev/null

    }

    run_user_exit tcclear

    run_ip link list | \
    while read inx interface details; do
	case $inx in
	    [0-9]*)
		clear_one_tc ${interface%:}
		;;
	    *)
		;;
	esac
    done
}

#
# Process a record from the accounting file
#
process_accounting_rule() {
    rule=
    rule2=
    jumpchain=
    user1=
	
    accounting_error() {
	error_message "Warning: Invalid Accounting rule" $action $chain $source $dest $proto $port $sport $user
    }

    accounting_interface_error() {
	error_message "Warning: Unknown interface $1 in " $action $chain $source $dest $proto $port $sport $user
    }

    accounting_interface_verify() {
	verify_interface $1 || accounting_interface_error $1
    }

    jump_to_chain() {
	if ! havechain $jumpchain; then
	    if ! createchain2 $jumpchain No; then
		accounting_error
		return 2
	    fi
	fi
	
	rule="$rule -j $jumpchain"
    }


    case $source in
	*:*)
	    accounting_interface_verify ${source%:*}
	    rule="$(source_ip_range ${source#*:}) $(match_source_dev ${source%:*})"
	    ;;
	*.*.*.*|+*|!+*)
	    rule="$(source_ip_range $source)"
	    ;;
	-|all|any)
	    ;;
	*)
	    if [ -n "$source" ]; then
		accounting_interface_verify $source
		rule="$(match_source_dev $source)"
	    fi
	    ;;
    esac

    [ -n "$dest" ] && case $dest in
	*:*)
	    accounting_interface_verify ${dest%:*}
	    rule="$rule $(dest_ip_range ${dest#*:}) $(match_dest_dev ${dest%:*})"
	    ;;
	*.*.*.*|+*|!*)
	    rule="$rule $(dest_ip_range $dest)"
	    ;;
	-|all|any)
	    ;;
	*)
	    accounting_interface_verify $dest
	    rule="$rule $(match_dest_dev $dest)"
	    ;;
    esac

    [ -n "$proto" ] && case $proto in
	-|any|all)
	    ;;
	ipp2p)
	    rule="$rule -p tcp -m ipp2p --${port:-ipp2p}"
	    port=
	    ;;
	*)
	    rule="$rule -p $proto"
	    ;;
    esac

    [ -n "$port" ] && case $port in
	-|any|all)
	    ;;
	*)
	    rule="$rule --dport $port"
	    ;;
    esac

    [ -n "$sport" ] && case $sport in
	-|any|all)
	    ;;
	*)
	    rule="$rule --sport $sport"
	    ;;
    esac

    [ -n "$user" ] && case $user in
	-|any|all)
	    ;;
	*)
	    [ "$chain" != OUTPUT ] && \
		fatal_error "Invalid use of a user/group: chain is not OUTPUT but $chain"
	    rule="$rule -m owner"
	    user1="$user"

	    case "$user" in
		!*+*)
		    if [ -n "${user#*+}" ]; then
			rule="$rule ! --cmd-owner ${user#*+} "
		    fi
		    user1=${user%+*}
		    ;;		
		*+*)
		    if [ -n "${user#*+}" ]; then
			rule="$rule --cmd-owner ${user#*+} "
		    fi
		    user1=${user%+*}
		    ;;
	    esac

	    case "$user1" in
		!*:*)
		    if [ "$user1" != "!:" ]; then
			temp="${user1#!}"
			temp="${temp%:*}"
			[ -n "$temp" ] && rule="$rule ! --uid-owner $temp " 
			temp="${user1#*:}"
			[ -n "$temp" ] && rule="$rule ! --gid-owner $temp "
		    fi
		    ;;
		*:*)
		    if [ "$user1" != ":" ]; then
			temp="${user1%:*}"
			[ -n "$temp" ] && rule="$rule --uid-owner $temp " 
			temp="${user1#*:}"
			[ -n "$temp" ] && rule="$rule --gid-owner $temp "
		    fi
		    ;;
		!*)
		    [ "$user1" != "!" ] && rule="$rule ! --uid-owner ${user1#!} "
		    ;;
		*)
		    [ -n "$user1" ] && rule="$rule --uid-owner $user1 "
		    ;;
	    esac
	    ;;
    esac

    case $action in
	COUNT)
	    ;;
	DONE)
	    rule="$rule -j RETURN"
	    ;;
	*:COUNT)
	    rule2="$rule"
	    jumpchain=${action%:*}
	    jump_to_chain || return
	    ;;
	JUMP:*)
	    jumpchain=${action#*:}
	    jump_to_chain || return
	    ;;
	*)
	    jumpchain=$action
	    jump_to_chain || return
	    ;;
    esac

    [ "x$chain" = "x-" ] && chain=accounting
    [ -z "$chain" ] && chain=accounting
		
    ensurechain1 $chain

    if $IPTABLES -A $chain $(fix_bang $rule) ; then
	[ -n "$rule2" ] && run_iptables2 -A $jumpchain $rule2
	progress_message "   Accounting rule" $action $chain $source $dest $proto $port $sport $user Added
    else
	accounting_error
    fi
}

#
# Set up Accounting
#
setup_accounting() # $1 = Name of accounting file
{
    
    echo "Setting up Accounting..."

    strip_file accounting $1

    while read action chain source dest proto port sport user ; do
	expandv action chain source dest proto port sport user
	process_accounting_rule
    done < $TMP_DIR/accounting

    if havechain accounting; then
	for chain in INPUT FORWARD OUTPUT; do
	    run_iptables -A $chain -j accounting
	done
    fi

}

#      
# Check the configuration
#
check_config() {

    disclaimer() {
	echo
	echo "Notice:  The 'check' command is provided to catch"
	echo "         obvious errors in a Shorewall configuration."
	echo "         It is not designed to catch all possible errors"
	echo "         so please don't submit problem reports about"
	echo "         error conditions that 'check' doesn't find"
	echo
    }


    report_capabilities

    echo "Verifying Configuration..."

    verify_os_version

    if [ -n "$BRIDGING" ]; then
	[ -n "$PHYSDEV_MATCH" ] || startup_error "BRIDGING=Yes requires Physdev Match support in your Kernel and iptables"
    fi

    [ "$MACLIST_TTL" = "0" ] && MACLIST_TTL=

    if [ -n "$MACLIST_TTL" -a -z "$RECENT_MATCH" ]; then
	startup_error "MACLIST_TTL requires the Recent Match capability which is not present in your Kernel and/or iptables"
    fi

    echo "Determining Zones..."

    determine_zones
    check_duplicate_zones

    [ -z "$zones" ] && startup_error "ERROR: No Zones Defined"

    display_list "Zones:" $zones

    ipsecfile=$(find_file ipsec)

    [ -f $ipsecfile ] && \
	echo "Validating ipsec file..." && \
	setup_ipsec $ipsecfile

    echo "Validating interfaces file..."

    validate_interfaces_file

    echo "Validating hosts file..."

    validate_hosts_file

    echo "Determining Hosts in Zones..."

    determine_interfaces
    determine_hosts

    echo "Validating policy file..."

    validate_policy

    validate_blacklist

    echo "Pre-validating Actions..."

    process_actions1

    echo "Validating rules file..."

    rules=$(find_file rules)
    strip_file rules $rules
    process_rules

    echo "Validating Actions..."

    process_actions2
    process_actions3

    rm -rf $TMP_DIR
    [ -n "$RESTOREBASE" ] && rm -f $RESTOREBASE

    echo "Configuration Validated"

    disclaimer

}

#
# Refresh queuing and classes
#
refresh_tc() {

    echo "Refreshing Traffic Control Rules..."

    [ -n "$CLEAR_TC" ] && delete_tc1

    [ -n "$MARK_IN_FORWARD_CHAIN" ] && chain=tcfor || chain=tcpre

    if mangle_chain_exists $chain; then
        #
        # Flush the TC mangle chains
        #
	run_iptables -t mangle -F $chain

        run_iptables -t mangle -F tcout
        #
        # Process the TC Rules File
        #
        strip_file tcrules

        while read mark sources dests proto ports sports; do
	    expandv mark sources dests proto ports sports
	    rule=$(echo "$mark $sources $dests $proto $ports $sports")
	    process_tc_rule
        done < $TMP_DIR/tcrules

	run_user_exit tcstart
    else
	setup_tc1
    fi

}

#
# Add one Filter Rule from an action -- Helper function for the action file processor
#
# The caller has established the following variables:
#    COMMAND      = current command. If 'check', we're executing a 'check'
#                   which only goes through the motions.
#    client	  = SOURCE IP or MAC
#    server	  = DESTINATION IP or interface
#    protocol	  = Protocol
#    address	  = Original Destination Address
#    port	  = Destination Port
#    cport	  = Source Port
#    multioption  = String to invoke multiport match if appropriate
#    action	  = The chain for this rule
#    ratelimit    = Optional rate limiting clause
#    userandgroup = owner match clause
#    logtag       = Log tag
#
add_an_action()
{
    do_ports() {
	if [ -n "$port" ]; then
	    dports="--dport"
	    if [ -n "$multioption" -a "$port" != "${port%,*}" ]; then
		multiport="$multioption"
		dports="--dports"
	    fi
	    dports="$dports $port"
	fi
	
	if [ -n "$cport" ]; then
	    sports="--sport"
	    if [ -n "$multioption" -a "$cport" != "${cport%,*}" ]; then
		multiport="$multioption"
		sports="--sports"
	    fi
	    sports="$sports $cport"
	fi
    }

    interface_error()
    {
	fatal_error "Unknown interface $1 in rule: \"$rule\""
    }

    action_interface_verify()
    {
	verify_interface $1 || interface_error $1
    }

    # Set source variables. The 'cli' variable will hold the client match predicate(s).

    cli=

    case "$client" in
    -)
	;;
    *:*)
	action_interface_verify ${client%:*}
	cli="$(match_source_dev ${client%:*}) $(source_ip_range ${client#*:})"
	;;
    *.*.*|+*|!+*)
	cli="$(source_ip_range $client)"
	;;
    ~*)
	cli=$(mac_match $client)
	;;
    *)
	if [ -n "$client" ]; then
	    action_interface_verify $client
	    cli="$(match_source_dev $client)"
	fi
	;;
    esac

    # Set destination variables - 'serv' and 'dest_interface' hold the server match predicate(s).

    dest_interface=
    serv=

    case "$server" in
    -)
	;;
    *.*.*|+*|!+*)
	serv=$server
	;;
    ~*)
	fatal_error "Rule \"$rule\" - Destination may not be specified by MAC Address"
	;;
    *)
	if [ -n "$server" ]; then
	    action_interface_verify $server
	    dest_interface="$(match_dest_dev $server)"
	fi
	;;
    esac

    # Setup protocol and port variables

    sports=
    dports=
    proto=$protocol
    servport=$serverport
    multiport=

    [ x$port  = x- ] && port=
    [ x$cport = x- ] && cport=

    case $proto in
	tcp|TCP|6)
	    do_ports
	    [ "$target" = QUEUE ] && proto="$proto --syn"
	    ;;
	udp|UDP|17)
	    do_ports
	    ;;
	icmp|ICMP|1)
	    [ -n "$port" ]  && 	dports="--icmp-type $port"
	    ;;
	*)
	    [ -n "$port" ] && \
		fatal_error "Port number not allowed with protocol \"$proto\"; rule: \"$rule\""
	    ;;
    esac

    proto="${proto:+-p $proto}"

    # Some misc. setup

    case "$logtarget" in
	LOG)
	    [ -z "$loglevel" ] && fatal_error "LOG requires log level"
	    ;;
    esac

    if [ $COMMAND != check ]; then
       if [ -n "${serv}" ]; then
	    for serv1 in $(separate_list $serv); do
		for srv in $(firewall_ip_range $serv1); do
		    if [ -n "$loglevel" ]; then
			log_rule_limit $loglevel $chain $action $logtarget "$ratelimit" "$logtag" -A $userandgroup \
			    $(fix_bang $proto $sports $multiport $cli $(dest_ip_range $srv) $dports)
		    fi
		    
		    run_iptables2 -A $chain $proto $multiport $cli $sports \
			$(dest_ip_range $srv) $dports $ratelimit $userandgroup -j $target
		done
	    done
	else
	    if [ -n "$loglevel" ]; then
		log_rule_limit $loglevel $chain $action $logtarget "$ratelimit" "$logtag" -A $userandgroup \
		    $(fix_bang $proto $sports $multiport $cli $dest_interface $dports)
	    fi
		    
	    run_iptables2 -A $chain $proto $multiport $cli $dest_interface $sports \
		$dports $ratelimit $userandgroup -j $target
	fi
    fi
}

#
# Process a record from an action file for the 'start', 'restart' or 'check' commands
#
process_action() # $1 = chain    (Chain to add the rules to)
                 # $2 = action   (The action name for logging purposes)
                 # $3 = target   (The (possibly modified) contents of the TARGET column)
                 # $4 = clients
                 # $5 = servers
                 # $6 = protocol
                 # $7 = ports
                 # $8 = cports
                 # $9 = ratelimit
                 # $10 = userspec
{
    local chain="$1"
    local action="$2"
    local target="$3"
    local clients="$4"
    local servers="$5"
    local protocol="$6"
    local ports="$7"
    local cports="$8"
    local ratelimit="$9"
    local userspec="${10}"
    local userandgroup=
    local logtag=

    if [ -n "$ratelimit" ]; then
	case $ratelimit in
	    -)
		ratelimit=
		;;
	    *:*)
		ratelimit="-m limit --limit ${ratelimit%:*} --limit-burst ${ratelimit#*:}"
		;;
	    *)
		ratelimit="-m limit --limit $ratelimit"
		;;
	esac
    fi

    [ "x$userspec" = "x-" ] && userspec=

    if [ -n "$userspec" ]; then
	userandgroup="-m owner"
	
	case "$userspec" in
	    !*+*)
		if [ -n "${userspec#*+}" ]; then
		    userandgroup="$userandgroup ! --cmd-owner ${userspec#*+}"
		fi
		userspec=${userspec%+*}
		;;		
	    *+*)
		if [ -n "${userspec#*+}" ]; then
		    userandgroup="$userandgroup --cmd-owner ${userspec#*+}"
		fi
		userspec=${userspec%+*}
		;;
	esac

	case "$userspec" in
	    !*:*)
		if [ "$userspec" != "!:" ]; then
		    temp="${userspec#!}"
		    temp="${temp%:*}"
		    [ -n "$temp" ] && userandgroup="$userandgroup ! --uid-owner $temp" 
		    temp="${userspec#*:}"
		    [ -n "$temp" ] && userandgroup="$userandgroup ! --gid-owner $temp"
		fi
		;;
	    *:*)
		if [ "$userspec" != ":" ]; then
		    temp="${userspec%:*}"
		    [ -n "$temp" ] && userandgroup="$userandgroup --uid-owner $temp" 
		    temp="${userspec#*:}"
		    [ -n "$temp" ] && userandgroup="$userandgroup --gid-owner $temp"
		fi 
		;;
	    !*)
		[ "$userspec" != "!" ] && userandgroup="$userandgroup ! --uid-owner ${userspec#!}"
		;;
	    *)
		[ -n "$userspec" ] && userandgroup="$userandgroup --uid-owner $userspec"
		;;
	esac

	[ "$userandgroup" = "-m owner" ] && userandgroup=
    fi

    # Isolate log level

    if [ "$target" = "${target%:*}" ]; then
	loglevel=
    else
	loglevel="${target#*:}"
	target="${target%%:*}"
	expandv loglevel
	if [ "$loglevel" != "${loglevel%:*}" ]; then
	    logtag="${loglevel#*:}"
	    loglevel="${loglevel%:*}"
	    expandv logtag
	fi

	case $loglevel in
	    none*)
		loglevel=
		logtag=
		[ $target = LOG ] && return
		;;
	esac

	loglevel=${loglevel%\!}
    fi

    logtarget="$target"

    case $target in
	REJECT)
	    target=reject
	    ;;
	CONTINUE)
	    target=RETURN
	    ;;
	*)
	    ;;
	esac

    # Generate Netfilter rule(s)

    [ "x$protocol" = "x-" ] && protocol=all || protocol=${protocol:=all}

    if [ -n "$XMULTIPORT" ] && \
	! list_search $protocol "icmp" "ICMP" "1" && \
	[ $(( $(list_count $ports)  + $(list_count1 $(split $ports ) ) ))  -le 16 -a \
	  $(( $(list_count $cports) + $(list_count1 $(split $cports ) ) )) -le 16 ] 
	then
	#
	# Extended MULTIPORT is enabled, and less than
	# 16 ports are listed (port ranges count as two ports) - use multiport match.
	#
	multioption="-m multiport"
	for client in $(separate_list ${clients:=-}); do
	    for server in $(separate_list ${servers:=-}); do
		#
		# add_an_action() modifies these so we must set their values each time
		#
		port=${ports:=-}
		cport=${cports:=-}
		add_an_action
	    done
	done
    elif [ -n "$MULTIPORT" ] && \
	! list_search $protocol "icmp" "ICMP" "1" && \
	[ "$ports" = "${ports%:*}" -a \
	"$cports" = "${cports%:*}" -a \
	$(list_count $ports) -le 15 -a \
	$(list_count $cports) -le 15 ]
	then
	#
	# MULTIPORT is enabled, there are no port ranges in the rule and less than
	# 16 ports are listed - use multiport match.
	#
	multioption="-m multiport"
	for client in $(separate_list ${clients:=-}); do
	    for server in $(separate_list ${servers:=-}); do
		#
		# add_an_action() modifies these so we must set their values each time
		#
		port=${ports:=-}
		cport=${cports:=-}
		add_an_action
	    done
	done
    else
	#
	# MULTIPORT is disabled or the rule isn't compatible with multiport match
	#
	multioption=
	for client in $(separate_list ${clients:=-}); do
	    for server in $(separate_list ${servers:=-}); do
		for port in $(separate_list ${ports:=-}); do
		    for cport in $(separate_list ${cports:=-}); do
			add_an_action
		    done
		done
	    done
	done
    fi
    #
    # Report Result
    #
    if [ $COMMAND = check ]; then
	progress_message "   Rule \"$rule\" checked."
    else
	progress_message "   Rule \"$rule\" added."
    fi
}

#
# Create and record a log action chain -- Log action chains have names
# that are formed from the action name by prepending a "%" and appending
# a 1- or 2-digit sequence number. In the functions that follow, 
# the CHAIN, LEVEL and TAG variable serves as arguments to the user's
# exit. We call the exit corresponding to the name of the action but we
# set CHAIN to the name of the iptables chain where rules are to be added.
# Similarly, LEVEL and TAG contain the log level and log tag respectively.
#
# For each <action>, we maintain two variables:
#
#    <action>_actchain - The action chain number.
#    <action>_chains   - List of ( level[:tag] , chainname ) pairs 
#
# The maximum length of a chain name is 30 characters -- since the log 
# action chain name is 2-3 characters longer than the base chain name, 
# this function truncates the original chain name where necessary before 
# it adds the leading "%" and trailing sequence number.

createlogactionchain() # $1 = Action Name, $2 = Log Level [: Log Tag ]
{
    local actchain= action=$1 level=$2 

    eval actchain=\${${action}_actchain}

    case ${#action} in
	29|30)
	    CHAIN=$(echo $action | truncate 28) # %...n makes 30
	    ;;
	*)
	    CHAIN=${action}
	    ;;
    esac
    
    [ "$COMMAND" != check ] && \
	while havechain %${CHAIN}${actchain}; do
	    actchain=$(($actchain + 1))
	    [ $actchain -eq 10 -a ${#CHAIN} -eq 28 ] && CHAIN=$(echo $CHAIN | truncate 27) # %...nn makes 30
        done

    CHAIN=%${CHAIN}${actchain}

    eval ${action}_actchain=$(($actchain + 1))

    if [ $COMMAND != check ]; then
	createchain $CHAIN No
	LEVEL=${level%:*}
	if [ "$LEVEL" != "$level" ]; then
	    TAG=${level#*:}
	else
	    TAG=
	fi
	run_user_exit $1
    fi

    eval ${action}_chains=\"\$${action}_chains $level $CHAIN\"

}

#
# Create an action chain and run it's associated user exit
#

createactionchain() # $1 = Action, including log level and tag if any
{
    case $1 in
	*:*:*)
	    set -- $(split $1)
	    createlogactionchain $1 $2:$3
	    ;;
	*:*)
	    set -- $(split $1)
	    createlogactionchain $1 $2
	    ;;
	*)
	    CHAIN=$1
	    if [ $COMMAND != check ]; then
		LEVEL=
		TAG=
		createchain $CHAIN no
		run_user_exit $CHAIN
	    fi
	    ;;
    esac
}

#
# Find the chain that handles the passed action. If the chain cannot be found,
# a fatal error is generated and the function does not return.
#
find_logactionchain() # $1 = Action, including log level and tag if any
{
    local fullaction=$1 action=${1%%:*} level= chains=

    case $fullaction in
	*:*)
	    level=${fullaction#*:}
	    ;;
	*)
	    if [ $COMMAND != check ]; then
		havechain $action ||  fatal_error "Fatal error in find_logactionchain"
	    fi

	    echo $action
	    return
	    ;;
    esac

    eval chains="\$${action}_chains"

    set -- $chains

    while [ $# -gt 0 ]; do
	[ "$1" = "$level" ] && { echo $2 ; return ; }
	shift;shift
    done

    fatal_error "Fatal error in find_logactionchain"

}

#
# This function determines the logging for a subordinate action or a rule within a subordinate action
# 
merge_levels() # $1=level at which superior action is called, $2=level at which the subordinate rule is called
{
    local superior=$1 subordinate=$2
    
    set -- $(split $1)
    
    case $superior in
	*:*:*)
	    case $2 in
		'none!')
		    echo ${subordinate%%:*}:'none!'
		    return
		    ;;
		*'!')
                    echo ${subordinate%%:*}:$2:$3
		    return
		    ;;
		*)
		    case $subordinate in
			*:*)
			    echo $subordinate
			    return
			    ;;
			*)
			    echo ${subordinate%%:*}:$2:$3
			    return
			    ;;
		    esac
		    ;;
	    esac
	    ;;
	*:*)
	    case $2 in
		'none!')
		    echo ${subordinate%%:*}:'none!'
		    return
		    ;;
		*'!')
                    echo ${subordinate%%:*}:$2
		    return
		    ;;
		*)
		    case $subordinate in
			*:*)
			    echo $subordinate
			    return
			    ;;
			*)
			    echo ${subordinate%%:*}:$2
			    return
			    ;;
		    esac
		    ;;
	    esac
	    ;;
	*)
	    echo $subordinate
	    ;;
    esac
}

#
# The next three functions implement the three phases of action processing.
#
# The first phase (process_actions1) occurs before the rules file is processed. /usr/share/shorewall/actions.std
# and /etc/shorewall/actions are scanned (in that order) and for each action:
#
#      a) The related action definition file is located and scanned.
#      b) Forward and unresolved action references are trapped as errors.
#      c) A dependency graph is created. For each <action>, the variable 'requiredby_<action>' lists the 
#         action[:level[:tag]] of each action invoked by <action>.
#      d) All actions are listed in the global variable ACTIONS.	    
#      e) Common actions are recorded (in variables of the name <policy>_common) and are added to the global
#         USEDACTIONS
#
# As the rules file is scanned, each action[:level[:tag]] is merged onto the USEDACTIONS list. When an <action> 
# is merged onto this list, its action chain is created. Where logging is specified, a chain with the name
# %<action>n is used where the <action> name is truncated on the right where necessary to ensure that the total
# length of the chain name does not exceed 30 characters.
#
# The second phase (process_actions2) occurs after the rules file is scanned. The transitive closure of 
# USEDACTIONS is generated; again, as new actions are merged onto this list, their action chains are created.
#
# The final phase (process_actions3) is to traverse the USEDACTIONS list populating each chain appropriately
# by reading the action definition files and creating rules. Note that a given action definition file is
# processed once for each unique [:level[:tag]] applied to an invocation of the action.
#
process_actions1() {
	
    ACTIONS="dropBcast allowBcast dropNonSyn dropNotSyn rejNotSyn dropInvalid allowInvalid allowinUPnP allowoutUPnP forwardUPnP"
    
    USEDACTIONS=

    strip_file actions

    strip_file actions.std /usr/share/shorewall/actions.std

    for inputfile in actions.std actions; do
	while read xaction rest; do
	    [ "x$rest" = x ] || fatal_error "Invalid Action: $xaction $rest"

	    case $xaction in
		*:*)
		    temp=${xaction#*:}
		    [ ${#temp} -le 30 ] || fatal_error "Action Name Longer than 30 Characters: $temp"
		    xaction=${xaction%:*}
		    case $temp in
			ACCEPT|REJECT|DROP|QUEUE)
			    eval ${temp}_common=$xaction
			    if [ -n "$xaction" ] && ! list_search $xaction $USEDACTIONS; then
				USEDACTIONS="$USEDACTIONS $xaction"
			    fi
			    ;;
			*)
			    startup_error "Common Actions are only allowed for ACCEPT, DROP, REJECT and QUEUE"
			    ;;
		    esac
	    esac

	    [ -z "$xaction" ] && continue
	    
	    [ "$xaction" = "$(chain_base $xaction)" ] || startup_error "Invalid Action Name: $xaction"

	    if ! list_search $xaction $ACTIONS; then
		f=action.$xaction
		fn=$(find_file $f)
	    
		eval requiredby_${action}=
		
		if [ -f $fn ]; then
		    echo "   Pre-processing $fn..."
		    strip_file $f $fn
		    while read xtarget xclients xservers xprotocol xports xcports xratelimit $xuserspec; do
			expandv xtarget
			temp="${xtarget%%:*}"
			case "$temp" in
			    ACCEPT|DROP|REJECT|LOG|QUEUE|CONTINUE)
				;;
			    *)
				if list_search $temp $ACTIONS; then
				    eval requiredby_${xaction}=\"\$requiredby_${xaction} $xtarget\"
				else
				    rule="$(echo $xtarget $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec)"
				    startup_error "Invalid TARGET in rule \"$rule\""
				fi
				;;
			    
			esac
		    done < $TMP_DIR/$f
		else
		    startup_error "Missing Action File: $f"
		fi
		
		ACTIONS="$ACTIONS $xaction"
	    fi
	done < $TMP_DIR/$inputfile
    done
}

process_actions2() {

    local interfaces="$(find_interfaces_by_option upnp)"

    if [ -n "$interfaces" ]; then
	if ! list_search forwardUPnP $USEDACTIONS; then
	    error_message "Warning:Missing forwardUPnP rule (required by 'upnp' interface option on $interfaces)"
	    USEDACTIONS="$USEDACTIONS forwardUPnP"
	fi
    fi

    progress_message "   Generating Transitive Closure of Used-action List..."

    changed=Yes

    while [ -n "$changed" ]; do
	changed=
	for xaction in $USEDACTIONS; do
	    
	    eval required=\"\$requiredby_${xaction%%:*}\"
	    
	    for xaction1 in $required; do
		#
		# Generate the action that will be passed to process_action by merging the
		# logging specified when the action was invoked with the logging in the
		# invocation of the subordinate action (usually no logging)
		#
		xaction2=$(merge_levels $xaction $xaction1)

		if ! list_search $xaction2 $USEDACTIONS; then
		    #
		    # We haven't seen this one before -- create and record a chain to handle it
		    #
		    USEDACTIONS="$USEDACTIONS $xaction2"
		    createactionchain $xaction2
		    changed=Yes
		fi
	    done
	done
    done
}

process_actions3() {
    
    for xaction in $USEDACTIONS; do
	#
	# Find the chain associated with this action:level:tag
	#
	xchain=$(find_logactionchain $xaction)
	#
	# Split the action:level:tag
	#
        set -- $(split $xaction)

	xaction1=$1
	xlevel=$2
	xtag=$3
	#
	# Handle Builtin actions
	#
	case $xaction1 in
	    dropBcast)
		if [ "$COMMAND" != check ]; then
		    if [ -n "$PKTTYPE" ]; then
			case $xlevel in
			    none'!')
	                        ;;
			    *)
			        if [ -n "$xlevel" ]; then
				    log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -m pkttype --pkt-type broadcast
				    log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -m pkttype --pkt-type multicast
				fi
				;;
			esac
			
			run_iptables -A dropBcast -m pkttype --pkt-type broadcast -j DROP
			run_iptables -A dropBcast -m pkttype --pkt-type multicast -j DROP
		    else
			for address in $(find_broadcasts) 255.255.255.255 224.0.0.0/4 ; do
			    case $xlevel in
				none*)
				    ;;
				*)
				    [ -n "$xlevel" ] && \
					log_rule_limit ${xlevel%\!} $xchain dropBcast DROP "" "$xtag" -A -d $address
				    ;;
			    esac
			    
			    run_iptables -A $xchain -d $address -j DROP
			done
		    fi
		fi
		;;
	    allowBcast)
		if [ "$COMMAND" != check ]; then
		    if [ -n "$PKTTYPE" ]; then
			case $xlevel in
			    none'!')
	                        ;;
			    *)
			        if [ -n "$xlevel" ]; then
				    log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -m pkttype --pkt-type broadcast
				    log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -m pkttype --pkt-type multicast
				fi
				;;
			esac
			
			run_iptables -A allowBcast -m pkttype --pkt-type broadcast -j ACCEPT
			run_iptables -A allowBcast -m pkttype --pkt-type multicast -j ACCEPT
		    else
			for address in $(find_broadcasts) 255.255.255.255 224.0.0.0/4 ; do
			    case $xlevel in
				none*)
				    ;;
				*)
				    [ -n "$xlevel" ] && \
					log_rule_limit ${xlevel%\!} $xchain allowBcast ACCEPT "" "$xtag" -A -d $address
				    ;;
			    esac
			    
			    run_iptables -A $xchain -d $address -j ACCEPT
			done
		    fi
		fi
		;;
	    dropNonSyn)
		error_message "WARNING: \"dropNonSyn\" has been replaced by \"dropNotSyn\""
		
		if [ "$COMMAND" != check ]; then
		    [ -n "$xlevel" ] && \
			log_rule_limit ${xlevel%\!} $xchain dropNonSyn DROP "" "$xtag" -A -p tcp ! --syn
		    run_iptables -A $xchain -p tcp ! --syn -j DROP
		fi
		;;
	    dropNotSyn)
		if [ "$COMMAND" != check ]; then
		    [ -n "$xlevel" ] && \
			log_rule_limit ${xlevel%\!} $xchain dropNotSyn DROP "" "$xtag" -A -p tcp ! --syn
		    run_iptables -A $xchain -p tcp ! --syn -j DROP
		fi
		;;
	    rejNotSyn)
		if [ "$COMMAND" != check ]; then
		    [ -n "$xlevel" ] && \
			log_rule_limit ${xlevel%\!} $xchain rejNotSyn REJECT "" "$xtag" -A -p tcp ! --syn
		    run_iptables -A $xchain -p tcp ! --syn -j REJECT --reject-with tcp-reset
		fi
		;;
	    dropInvalid)
		if [ "$COMMAND" != check ]; then
		    [ -n "$xlevel" ] && \
			log_rule_limit ${xlevel%\!} $xchain dropInvalid DROP "" "$xtag" -A -m state --state INVALID
		    run_iptables -A $xchain -m state --state INVALID -j DROP
		fi
		;;
	    allowInvalid)
		if [ "$COMMAND" != check ]; then
		    [ -n "$xlevel" ] && \
			log_rule_limit ${xlevel%\!} $xchain allowInvalid ACCEPT "" "$xtag" -A -m state --state INVALID
		    run_iptables -A $xchain -m state --state INVALID -j ACCEPT
		fi
		;;
	    forwardUPnP)
		;;
	    allowinUPnP)
		if [ "$COMMAND" != check ]; then
		    if [ -n "$xlevel" ]; then
			log_rule_limit ${xlevel%\!} $xchain allowinUPnP ACCEPT "" "$xtag" -A -p udp --dport 1900
			log_rule_limit ${xlevel%\!} $xchain allowinUPnP ACCEPT "" "$xtag" -A -p tcp --dport 49152
		    fi

		    run_iptables -A $xchain -p udp --dport 1900  -j ACCEPT
		    run_iptables -A $xchain -p tcp --dport 49152 -j ACCEPT
		fi
		;;
	    allowoutUPnP)
		if [ "$COMMAND" != check ]; then
		    [ -n "$xlevel" ] && \
			log_rule_limit ${xlevel%\!} $xchain allowoutUPnP ACCEPT "" "$xtag" -A -m owner --owner-cmd upnpd
		    run_iptables -A $xchain -m owner --cmd-owner upnpd -j ACCEPT
		fi
		;;
	    *)
		#
		# Not a builtin
		#
		f=action.$xaction1
				
		echo "Processing $(find_file $f) for Chain $xchain..."
		
		while read xtarget xclients xservers xprotocol xports xcports xratelimit xuserspec; do
		    expandv xtarget
		    #
		    # Generate the target:level:tag to pass to process_action()
		    #
		    xaction2=$(merge_levels $xaction $xtarget)

		    case ${xaction2%%:*} in 
			ACCEPT|DROP|REJECT|LOG|QUEUE|CONTINUE)
			    #
			    # Builtin target -- Nothing to do
			    #
			    ;;
			*)
			    #
			    # Not a builtin target -- Replace the target from the file
			    #                      -- with the one generated above
			    xtarget=$xaction2
			    #
			    # And locate the chain for that action:level:tag
			    #
			    xaction2=$(find_logactionchain $xtarget)
			    ;;
		    esac

		    expandv xclients xservers xprotocol xports xcports xratelimit xuserspec

		    rule="$(echo $xtarget $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec)"
		    process_action $xchain $xaction1 $xaction2 $xclients $xservers $xprotocol $xports $xcports $xratelimit $xuserspec

		done < $TMP_DIR/$f
		;;
	esac
    done
}
	
#
# Add a NAT rule - Helper function for the rules file processor
#
# The caller has established the following variables:
#    COMMAND        = The current command -- if 'check', we just go through
#                     the motions.
#    cli	    = Source IP, interface or MAC Specification
#    serv	    = Destination IP Specification
#    servport	    = Port the server is listening on
#    dest_interface = Destination Interface Specification
#    proto	    = Protocol Specification
#    addr	    = Original Destination Address
#    dports	    = Destination Port Specification. 'dports' may be changed
#		      by this function
#    cport	    = Source Port Specification
#    multiport	    = String to invoke multiport match if appropriate
#    ratelimit      = Optional rate limiting clause
#    userandgroup   = -m owner match to limit the rule to a particular user and/or group
#    logtag         = Log tag
#
add_nat_rule() {
    local chain
    local excludedests=

    # Be sure we can NAT

    if [ -z "$NAT_ENABLED" ]; then
	fatal_error "Rule \"$rule\" requires NAT which is disabled"
    fi

    # Parse SNAT address if any

    if [ "$addr" != "${addr%:*}" ]; then
	fatal_error "SNAT may no longer be specified in a DNAT rule; use /etc/shorewall/masq instead"
    fi

    # Set original destination address

    case $addr in
	all)
	    addr=
	    ;;
	detect)
	    addr=
	    if [ -n "$DETECT_DNAT_IPADDRS" -a "$source" != "$FW" ]; then
		eval interfaces=\$${source}_interfaces
		for interface in $interfaces; do
		    addr=${addr:+$addr,}$(find_first_interface_address $interface)
		done
	    fi
	    ;;
	!*)
	    if [ $(list_count $addr) -gt 1 ]; then
		excludedests="$(separate_list ${addr#\!})"
		addr=
	    fi
	    ;;
    esac

    addr=${addr:-0.0.0.0/0}

    # Select target

    if [ "$logtarget" = SAME ]; then
	[ -n "$servport" ] && fatal_error "Port mapping not allowed in SAME rules"
	serv1=
	for srv in $(separate_list $serv); do
	    serv1="$serv1 --to ${srv}"
	done
	target1="SAME $serv1"
    elif [ -n "$serv" ]; then
	servport="${servport:+:$servport}"
	serv1=
	for srv in $(separate_list $serv); do
	    serv1="$serv1 --to-destination ${srv}${servport}"
	done
	target1="DNAT $serv1"
    else
	target1="REDIRECT --to-port $servport"
    fi

    if [ $source = $FW ]; then
	[ -n "$excludezones" ] && fatal_error "Invalid Source in rule \"$rule\""
    fi

    # Generate nat table rules

    if [ $COMMAND != check ]; then
	if [ "$source" = "$FW" ]; then
	    if [ -n "$excludedests" ]; then
		chain=nonat${nonat_seq}
		nonat_seq=$(($nonat_seq + 1))
		createnatchain $chain

		for adr in $(separate_list $addr); do
		    run_iptables2 -t nat -A OUTPUT $cli $proto $userandgroup $multiport $sports $dports $(dest_ip_range $adr) -j $chain
		done

		for adr in $excludedests; do
		    addnatrule $chain $(dest_ip_range $adr) -j RETURN
		done

		if [ -n "$loglevel" ]; then
		    log_rule $loglevel $chain $logtarget -t nat
		fi

		addnatrule $chain $ratelimit $proto -j $target1 # Protocol is necessary for port redirection
	    else
		for adr in $(separate_list $addr); do
		    if [ -n "$loglevel" ]; then
			log_rule_limit $loglevel OUTPUT OUTPUT $logtarget "$ratelimit" "$logtag" -A -t nat \
			    $(fix_bang $proto $cli $sports $userandgroup $(dest_ip_range $adr) $multiport $dports)
		    fi

		    run_iptables2 -t nat -A OUTPUT $ratelimit $proto $sports $userandgroup $(dest_ip_range $adr) $multiport $dports -j $target1
		done
	    fi
	else
	    chain=$(dnat_chain $source)

	    if [ -n "${excludezones}${excludedests}" ]; then
		chain=nonat${nonat_seq}
		nonat_seq=$(($nonat_seq + 1))
		createnatchain $chain

		for adr in $(separate_list $addr); do
		    addnatrule $(dnat_chain $source) $cli $proto $multiport $sports $dports $(dest_ip_range $adr) -j $chain
		done

		for z in $(separate_list $excludezones); do
		    eval hosts=\$${z}_hosts
		    for host in $hosts; do
			addnatrule $chain $(match_source_hosts ${host#*:}) -j RETURN
		    done
		done

		for adr in $excludedests; do
		    addnatrule $chain $(dest_ip_range $adr) -j RETURN
		done

		if [ -n "$loglevel" ]; then
		    log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A -t nat
		fi

		addnatrule $chain $ratelimit $proto -j $target1 # Protocol is necessary for port redirection
	    else
		for adr in $(separate_list $addr); do
		    if [ -n "$loglevel" ]; then
			ensurenatchain $chain
			log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A -t nat \
			    $(fix_bang $proto $cli $sports $(dest_ip_range $adr) $multiport $dports)
		    fi
		    
		    addnatrule $chain $proto $ratelimit $cli $sports \
			-d $adr $multiport $dports -j $target1
		done
	    fi
	fi
    fi

    # Replace destination port by the new destination port

    if [ -n "$servport" ]; then
	if [ -z "$multiport" ]; then
	    dports="--dport ${servport#*:}"
	else
	    dports="--dports ${servport#*:}"
	fi
    fi

    [ "x$addr" = "x0.0.0.0/0" ] && addr=
    ratelimit=
}

#
# Add one Filter Rule -- Helper function for the rules file processor
#
# The caller has established the following variables:
#    COMMAND     = current command. If 'check', we're executing a 'check'
#                  which only goes through the motions.
#    client	 = SOURCE IP or MAC
#    server	 = DESTINATION IP or interface
#    protocol	 = Protocol
#    address	 = Original Destination Address
#    port	 = Destination Port
#    cport	 = Source Port
#    multioption = String to invoke multiport match if appropriate
#    servport	 = Port the server listens on
#    chain	 = The canonical chain for this rule
#    ratelimit   = Optional rate limiting clause
#    userandgroup= -m owner clause
#    userspec    = User name
#    logtag      = Log tag
#
add_a_rule()
{
    local natrule=

    do_ports() {
	if [ -n "$port" ]; then
	    dports="--dport"
	    if [ -n "$multioption" -a "$port" != "${port%,*}" ]; then
		multiport="$multioption"
		dports="--dports"
	    fi
	    dports="$dports $port"
	fi
	
	if [ -n "$cport" ]; then
	    sports="--sport"
	    if [ -n "$multioption" -a "$cport" != "${cport%,*}" ]; then
		multiport="$multioption"
		sports="--sports"
	    fi
	    sports="$sports $cport"
	fi
    }

    interface_error()
    {
	fatal_error "Unknown interface $1 in rule: \"$rule\""
    }

    rule_interface_verify()
    {
	verify_interface $1 || interface_error $1
    }

    # Set source variables. The 'cli' variable will hold the client match predicate(s).

    cli=

    case "$client" in
    -)
	;;
    *:*)
	rule_interface_verify ${client%:*}
	cli="$(match_source_dev ${client%:*}) $(source_ip_range ${client#*:})"
	;;
    *.*.*|+*)
	cli="$(source_ip_range $client)"
	;;
    ~*)
	cli=$(mac_match $client)
	;;
    *)
	if [ -n "$client" ]; then
	    rule_interface_verify $client
	    cli="$(match_source_dev $client)"
	fi
	;;
    esac

    # Set destination variables - 'serv' and 'dest_interface' hold the server match predicate(s).

    dest_interface=
    serv=

    case "$server" in
    -)
	;;
    *.*.*|+*)
	serv=$server
	;;
    ~*)
	fatal_error "Rule \"$rule\" - Destination may not be specified by MAC Address"
	;;
    *)
	if [ -n "$server" ]; then
	    [ -n "$nonat" ] && fatal_error "Destination interface not allowed with $logtarget"
	    rule_interface_verify $server
	    dest_interface="$(match_dest_dev $server)"
	fi
	;;
    esac

    # Setup protocol and port variables

    sports=
    dports=
    proto=$protocol
    addr=$address
    servport=$serverport
    multiport=

    [ x$port  = x- ] && port=
    [ x$cport = x- ] && cport=

    case $proto in
	tcp|TCP|6)
	    do_ports
	    [ "$target" = QUEUE ] && proto="$proto --syn"
	    ;;
	udp|UDP|17)
	    do_ports
	    ;;
	icmp|ICMP|1)
	    [ -n "$port" ]  && 	dports="--icmp-type $port"
	    ;;
	all|ALL)
	    [ -n "$port" ] && \
		fatal_error "Port number not allowed with protocol \"all\"; rule: \"$rule\""
	    proto=
	    ;;
	ipp2p)
	    dports="-m ipp2p --${port:-ipp2p}"
	    port=
	    proto=tcp
	    do_ports
	    ;;
	*)
	    [ -n "$port" ] && \
		fatal_error "Port number not allowed with protocol \"$proto\"; rule: \"$rule\""
	    ;;
    esac

    proto="${proto:+-p $proto}"

    # Some misc. setup

    case "$logtarget" in
	ACCEPT|DROP|REJECT|CONTINUE)	
	    if [ -z "$proto" -a -z "$cli" -a -z "$serv" -a -z "$servport" -a -z "$userandgroup" ] ; then
		error_message "Warning -- Rule \"$rule\" is a POLICY"
		error_message "	       -- and should be moved to the policy file"
	    fi
	    ;;
	REDIRECT)
	    [ -n "$serv" ] && \
		fatal_error "REDIRECT rules cannot  specify a server IP; rule: \"$rule\""
	    servport=${servport:=$port}
	    natrule=Yes
	    ;;
	DNAT|SAME)
	    [ -n "$serv" ] || \
		fatal_error "$logtarget rules require a server address; rule: \"$rule\""
	    natrule=Yes
	    ;;
	LOG)
	    [ -z "$loglevel" ] && \
		fatal_error "LOG requires log level"
	    ;;
    esac

    if [ -n "${serv}${servport}" ]; then
	if [ $COMMAND != check ]; then

	    # A specific server or server port given

	    if [ -n "$natrule" ]; then
		add_nat_rule
	    elif [ -n "$addr" -a "$addr" != "$serv" ] || [ -n "$servport" -a "$servport" != "$port" ]; then
		fatal_error "Only DNAT, SAME and REDIRECT rules may specify destination mapping; rule \"$rule\""
	    fi

	    if [ -z "$dnat_only" ]; then
		if [ -n "$serv" ]; then
		    for serv1 in $(separate_list $serv); do
			for srv in $(firewall_ip_range $serv1); do
			    if [ -n "$addr" -a -n "$CONNTRACK_MATCH" ]; then
				for adr in $(separate_list $addr); do
				    if [ -n "$loglevel" -a -z "$natrule" ]; then
					log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A -m conntrack --ctorigdst $adr \
					    $userandgroup $(fix_bang $proto $sports $multiport $cli $(dest_ip_range $srv) $dports)
				    fi

				    run_iptables2 -A $chain $proto $ratelimit $multiport $cli $sports \
					$(dest_ip_range $srv) $dports -m conntrack --ctorigdst $adr $userandgroup -j $target
				done
			    else
				if [ -n "$loglevel" -a -z "$natrule" ]; then
				    log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A $userandgroup \
					$(fix_bang $proto $sports $multiport $cli $(dest_ip_range $srv) $dports)
				fi
				
				[ -n "$nonat" ] && \
				    addnatrule $(dnat_chain $source) $proto $multiport \
				        $cli $sports $(dest_ip_range $srv) $dports $ratelimit $userandgroup -j RETURN

				[ "$logtarget" != NONAT ] && \
				    run_iptables2 -A $chain $proto $multiport $cli $sports \
					$(dest_ip_range $srv) $dports $ratelimit $userandgroup -j $target
			    fi
			done
		    done
		else
		    if [ -n "$loglevel" -a -z "$natrule" ]; then
		        log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A $userandgroup \
			    $(fix_bang $proto $sports $multiport $cli $dports)
		    fi

		    [ -n "$nonat" ] && \
			addnatrule $(dnat_chain $source) $proto $multiport \
			    $cli $sports $dports $ratelimit $userandgroup -j RETURN

		    [ "$logtarget" != NONAT ] && \
			run_iptables2 -A $chain $proto $multiport $cli $sports \
			    $dports $ratelimit $userandgroup -j $target
		fi
	    fi
	fi
    else

	# Destination is a simple zone

	[ -n "$addr" ] && fatal_error \
	    "An ORIGINAL DESTINATION ($addr) is only allowed in" \
	    " a DNAT, SAME or REDIRECT: \"$rule\""

	if [ $COMMAND != check ]; then
	    if [ -n "$loglevel" ]; then
		log_rule_limit $loglevel $chain $chain $logtarget "$ratelimit" "$logtag" -A $userandgroup \
		    $(fix_bang $proto $multiport $cli $dest_interface $sports $dports)
	    fi

	    if [ "$logtarget" != LOG ]; then
		[ -n "$nonat" ] && \
		    addnatrule $(dnat_chain $source) $proto $multiport \
		       $cli $sports $dports $ratelimit $userandgroup -j RETURN

		[ "$logtarget" != NONAT ] && \
		    run_iptables2 -A $chain $proto $multiport $cli $dest_interface \
			$sports $dports $ratelimit $userandgroup -j $target
	    fi
	fi
    fi
}

#
# Process a record from the rules file for the 'start', 'restart' or 'check' commands
#
process_rule() # $1 = target
               # $2 = clients
               # $3 = servers
               # $4 = protocol
               # $5 = ports
               # $6 = cports
               # $7 = address
               # $8 = ratelimit
               # $9 = userspec
{
    local target="$1"
    local clients="$2"
    local servers="$3"
    local protocol="$4"
    local ports="$5"
    local cports="$6"
    local address="$7"
    local ratelimit="$8"
    local userspec="$9"
    local userandgroup=
    local logtag=
    local nonat=

    # Function Body - isolate rate limit

    [ "x$ratelimit" = "x-" ] && ratelimit=

    if [ -n "$ratelimit" ]; then
	case $ratelimit in
	    *:*)
		ratelimit="-m limit --limit ${ratelimit%:*} --limit-burst ${ratelimit#*:}"
		;;
	    *)
		ratelimit="-m limit --limit $ratelimit"
		;;
	esac
    fi

    # Isolate log level

    if [ "$target" = "${target%:*}" ]; then
	loglevel=
    else
	loglevel="${target#*:}"
	target="${target%%:*}"
	expandv loglevel
	if [ "$loglevel" != "${loglevel%:*}" ]; then
	    logtag="${loglevel#*:}"
	    loglevel="${loglevel%:*}"
	    expandv logtag
	fi

	if [ "$loglevel" = none ]; then
	    [ "$target" = LOG ] && return
	    loglevel=
	    logtag=
	fi

	loglevel=${loglevel%\!}	
    fi
    #
    # Save the original target in 'logtarget' for logging rules
    #
    logtarget=${target%-}
    #
    # Targets ending in "-" only apply to the nat table
    #
    [ $target = $logtarget ] && dnat_only= || dnat_only=Yes

    # Tranform the rule:
    #
    # - parse the user specification
    # - set 'target' to the filter table target.
    # - make $FW the destination for REDIRECT
    # - remove '-' suffix from logtargets while setting 'dnat_only'
    # - clear 'address' if it has been set to '-'

    [ "x$userspec" = x- ]   && userspec=
    [ "x$address" = "x-" ] && address=

    if [ -n "$userspec" ]; then

	userandgroup="-m owner"
	
	case "$userspec" in
	    !*+*)
		if [ -n "${userspec#*+}" ]; then
		    userandgroup="$userandgroup ! --cmd-owner ${userspec#*+}"
		fi
		userspec=${userspec%+*}
		;;		
	    *+*)
		if [ -n "${userspec#*+}" ]; then
		    userandgroup="$userandgroup --cmd-owner ${userspec#*+}"
		fi
		userspec=${userspec%+*}
		;;
	esac

	case "$userspec" in
	    !*:*)
		if [ "$userspec" != "!:" ]; then
		    temp="${userspec#!}"
		    temp="${temp%:*}"
		    [ -n "$temp" ] && userandgroup="$userandgroup ! --uid-owner $temp" 
		    temp="${userspec#*:}"
		    [ -n "$temp" ] && userandgroup="$userandgroup ! --gid-owner $temp"
		fi
		;;
	    *:*)
		if [ "$userspec" != ":" ]; then
		    temp="${userspec%:*}"
		    [ -n "$temp" ] && userandgroup="$userandgroup --uid-owner $temp" 
		    temp="${userspec#*:}"
		    [ -n "$temp" ] && userandgroup="$userandgroup --gid-owner $temp"
		fi 
		;;
	    !*)
		[ "$userspec" != "!" ] && userandgroup="$userandgroup ! --uid-owner ${userspec#!}"
		;;
	    *)
		[ -n "$userspec" ] && userandgroup="$userandgroup --uid-owner $userspec"
		;;
	esac

	[ "$userandgroup" = "-m owner" ] && userandgroup=
    fi

    case $target in
	ACCEPT+|NONAT)
	    nonat=Yes
	    target=ACCEPT
	    ;;
	ACCEPT|LOG)
	    ;;
	DROP)
	    [ -n "$ratelimit" ] && fatal_error "Rate Limiting not available with DROP"
	    ;;
	REJECT)
	    target=reject
	    ;;
	CONTINUE)
	    target=RETURN
	    ;;
	DNAT*|SAME*)
	    target=ACCEPT
	    address=${address:=detect}
	    ;;
	REDIRECT*)
	    target=ACCEPT
	    address=${address:=all}
	    if [ "x-" = "x$servers" ]; then
		servers=$FW
	    else
		servers="$FW::$servers"
	    fi
	    ;;
    esac

    # Parse and validate source

    if [ "$clients" = "${clients%:*}" ]; then
	clientzone="$clients"
	clients=
    else
	clientzone="${clients%%:*}"
	clients="${clients#*:}"
	[ -z "$clientzone" -o -z "$clients" ] && \
	   fatal_error "Empty source zone or qualifier: rule \"$rule\""
    fi

    if [ "$clientzone" = "${clientzone%!*}" ]; then
	excludezones=
    else
	excludezones="${clientzone#*!}"
	clientzone="${clientzone%!*}"

	case $logtarget in
	    DNAT|REDIRECT|SAME)
		;;
	    *)
		fatal_error "Exclude list only allowed with DNAT, SAME or REDIRECT"
		;;
	esac
    fi

    validate_zone $clientzone || fatal_error "Undefined Client Zone in rule \"$rule\""

    # Parse and validate destination

    source=$clientzone

    if [ $source = $FW ]; then
	source_hosts=
    elif [ -n "$userspec" ]; then
	fatal_error "Invalid use of a user-qualification: rule \"$rule\""
    else
	eval source_hosts=\"\$${source}_hosts\"
    fi

    if [ "$servers" = "${servers%:*}" ] ; then
	serverzone="$servers"
	servers=
	serverport=
    else
	serverzone="${servers%%:*}"
	servers="${servers#*:}"
	if [ "$servers" != "${servers%:*}" ] ; then
	    serverport="${servers#*:}"
	    servers="${servers%:*}"
	    [ -z "$serverzone" -o -z "$serverport" ] && \
	        fatal_error "Empty destination zone or server port: rule \"$rule\""
	else
	    serverport=
	    [ -z "$serverzone" -o -z "$servers" ] && \
	        fatal_error "Empty destination zone or qualifier: rule \"$rule\""
	fi
    fi

    if ! validate_zone $serverzone; then
	fatal_error "Undefined Server Zone in rule \"$rule\""
    fi

    dest=$serverzone

    # Ensure that this rule doesn't apply to a NONE policy pair of zones

    chain=${source}2${dest}

    eval policy=\$${chain}_policy

    [ -z "$policy" ] && \
	fatal_error "No policy defined from zone $source to zone $dest"

    [ $policy = NONE ] && \
	fatal_error "Rules may not override a NONE policy: rule \"$rule\""

    # Create the canonical chain if it doesn't already exist
    
    [ $COMMAND = check ] || ensurechain $chain

    # Generate Netfilter rule(s)

    protocol=${protocol:=all}

    case $logtarget in
	DNAT*|SAME)
	    if [ -n "$XMULTIPORT" ] && \
	       ! list_search $protocol "icmp" "ICMP" "1" && \
	       [ $(( $(list_count $ports)  + $(list_count1 $(split $ports ) ) ))  -le 16 -a \
		 $(( $(list_count $cports) + $(list_count1 $(split $cports ) ) )) -le 16 ]
		then
	        #
	        # Extended MULTIPORT is enabled, and less than
	        # 16 ports are listed (port ranges count as two ports) - use multiport match.
	        #
		multioption="-m multiport"
		for client in $(separate_list ${clients:=-}); do
		    #
		    # add_a_rule() modifies these so we must set their values each time
		    #
		    server=${servers:=-}
		    port=${ports:=-}
		    cport=${cports:=-}
		    add_a_rule
		done
	    elif [ -n "$MULTIPORT" ] && \
	       ! list_search $protocol "icmp" "ICMP" "1" && \
	       [ "$ports" = "${ports%:*}" -a \
		"$cports" = "${cports%:*}" -a \
		$(list_count $ports) -le 15 -a \
		$(list_count $cports) -le 15 ]
		then
	        #
	        # MULTIPORT is enabled, there are no port ranges in the rule and less than
	        # 16 ports are listed - use multiport match.
	        #
		multioption="-m multiport"
		for client in $(separate_list ${clients:=-}); do
		    #
		    # add_a_rule() modifies these so we must set their values each time
		    #
		    server=${servers:=-}
		    port=${ports:=-}
		    cport=${cports:=-}
		    add_a_rule
		done
	    else
	        #
	        # MULTIPORT is disabled or the rule isn't compatible with multiport match
	        #
		multioption=
		for client in $(separate_list ${clients:=-}); do
		    for port in $(separate_list ${ports:=-}); do
			for cport in $(separate_list ${cports:=-}); do
			    server=${servers:=-}
			    add_a_rule
			done
		    done
		done
	    fi
	    ;;
	*)

	    if [ -n "$XMULTIPORT" ] && \
	       ! list_search $protocol "icmp" "ICMP" "1" && \
	       [ $(( $(list_count $ports)  + $(list_count1 $(split $ports ) ) ))  -le 16 -a \
		 $(( $(list_count $cports) + $(list_count1 $(split $cports ) ) )) -le 16  ]
		then
	        #
	        # Extended MULTIPORT is enabled, and less than
	        # 16 ports are listed (port ranges count as two ports) - use multiport match.
	        #
		multioption="-m multiport"
		for client in $(separate_list ${clients:=-}); do
		    for server in $(separate_list ${servers:=-}); do
		        #
		        # add_a_rule() modifies these so we must set their values each time
		        #
			port=${ports:=-}
			cport=${cports:=-}
			add_a_rule
		    done
		done
	    elif [ -n "$MULTIPORT" ] && \
	       ! list_search $protocol "icmp" "ICMP" "1" && \
	       [ "$ports" = "${ports%:*}" -a \
		"$cports" = "${cports%:*}" -a \
		$(list_count $ports) -le 15 -a \
		$(list_count $cports) -le 15 ]
		then
	        #
	        # MULTIPORT is enabled, there are no port ranges in the rule and less than
	        # 16 ports are listed - use multiport match.
	        #
		multioption="-m multiport"
		for client in $(separate_list ${clients:=-}); do
		    for server in $(separate_list ${servers:=-}); do
		        #
		        # add_a_rule() modifies these so we must set their values each time
		        #
			port=${ports:=-}
			cport=${cports:=-}
			add_a_rule
		    done
		done
	    else
	        #
	        # MULTIPORT is disabled or the rule isn't compatible with multiport match
	        #
		multioption=
		for client in $(separate_list ${clients:=-}); do
		    for server in $(separate_list ${servers:=-}); do
			for port in $(separate_list ${ports:=-}); do
			    for cport in $(separate_list ${cports:=-}); do
				add_a_rule
			    done
			done
		    done
		done
	    fi
	    ;;
    esac
    #
    # Report Result
    #
    if [ $COMMAND = check ]; then
	progress_message "   Rule \"$rule\" checked."
    else
	progress_message "   Rule \"$rule\" added."
    fi
}

#
# Process the rules file for the 'start', 'restart' or 'check' command.
#
process_rules()
{
    #
    # Process a rule where the source or destination is "all"
    #
    process_wildcard_rule() {
	local yclients yservers ysourcezone ydestzone ypolicy
	
	for yclients in $xclients; do
	    for yservers in $xservers; do
		ysourcezone=${yclients%%:*}
		ydestzone=${yservers%%:*}
		if [ "${ysourcezone}" != "${ydestzone}" ] ; then
		    eval ypolicy=\$${ysourcezone}2${ydestzone}_policy
		    if [ "$ypolicy" != NONE ] ; then
			rule="$(echo $xtarget $yclients $yservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec)"
			process_rule $xtarget $yclients $yservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec
		    fi
		fi
	    done
	done
    }

    do_it() {
	expandv xprotocol xports xcports xaddress xratelimit xuserspec

	if [ "x$xclients" = xall ]; then
	    xclients="$zones $FW"
	    if [ "x$xservers" = xall ]; then
		xservers="$zones $FW"
	    fi
	    process_wildcard_rule
	    return
	fi

	if [ "x$xservers" = xall ]; then
	    xservers="$zones $FW"
	    process_wildcard_rule
	    return
	fi
	
	rule="$(echo $xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec)"
	process_rule $xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec
    }

    while read xtarget xclients xservers xprotocol xports xcports xaddress xratelimit xuserspec; do
	expandv xtarget xclients xservers

	if [ "x$xclients" = xnone -o "x$servers" = xnone ]; then
	    rule="$(echo $xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec)"
	    progress_message "   Rule \"$rule\" ignored."
	    continue
	fi

	case "${xtarget%%:*}" in
	    ACCEPT|ACCEPT+|NONAT|DROP|REJECT|DNAT|DNAT-|REDIRECT|REDIRECT-|LOG|CONTINUE|QUEUE|SAME|SAME-)
		do_it
		;;
	    *)
		if list_search ${xtarget%%:*} $ACTIONS; then
		    if ! list_search $xtarget $USEDACTIONS; then
			createactionchain $xtarget
			USEDACTIONS="$USEDACTIONS $xtarget"
		    fi

		    xtarget=$(find_logactionchain $xtarget)
		    do_it    
		else
		    rule="$(echo $xtarget $xclients $xservers $xprotocol $xports $xcports $xaddress $xratelimit $xuserspec)"
		    fatal_error "Invalid Action in rule \"$rule\""
		fi
		;;

	esac
    done < $TMP_DIR/rules
}

#
# Process a record from the tos file
#
# The caller has loaded the column contents from the record into the following
# variables:
#
#    src dst protocol sport dport tos
#
# and has loaded a space-separated list of their values in "rule".
#
process_tos_rule() {
    #
    # Parse the contents of the 'src' variable
    #
    if [ "$src" = "${src%:*}" ]; then
	srczone="$src"
	src=
    else
	srczone="${src%:*}"
	src="${src#*:}"
    fi

    source=
    #
    # Validate the source zone
    #
    if validate_zone $srczone; then
	source=$srczone
    elif [ "$srczone" = "all" ]; then
	source="all"
    else
	error_message "Warning: Undefined Source Zone - rule \"$rule\" ignored"
	return
    fi

    [ -n "$src" ] && case "$src" in
	*.*.*|+*|!+*)
	    #
	    # IP Address or networks
	    #
	    src="$(source_ip_range $src)"
	    ;;
	~*)
	    src=$(mac_match $src)
	    ;;
	*)
	    #
	    # Assume that this is a device name
	    #
	    if ! verify_interface $src ; then
		error_message "Warning: Unknown Interface in rule \"$rule\" ignored"
		return
	    fi

	    src="$(match_source_dev $src)"
	    ;;
    esac

    #
    # Parse the contents of the 'dst' variable
    #
    if [ "$dst" = "${dst%:*}" ]; then
	dstzone="$dst"
	dst=
    else
	dstzone="${dst%:*}"
	dst="${dst#*:}"
    fi

    dest=
    #
    # Validate the destination zone
    #
    if validate_zone $dstzone; then
	dest=$dstzone
    elif [ "$dstzone" = "all" ]; then
	dest="all"
    else
	error_message \
	 "Warning: Undefined Destination Zone - rule \"$rule\" ignored"
	return
    fi

    [ -n "$dst" ] && case "$dst" in
	*.*.*|+*|!+*)
	    #
	    # IP Address or networks
	    #
	    ;;
	*)
	    #
	    # Assume that this is a device name
	    #
	    error_message \
	     "Warning: Invalid Destination - rule \"$rule\" ignored"
	    return
	    ;;
    esac

    #
    # Setup PROTOCOL and PORT variables
    #
    sports=""
    dports=""

    case $protocol in
	tcp|udp|TCP|UDP|6|17)
	    [ -n "$sport" ] && [ "x${sport}" != "x-" ] && \
		sports="--sport $sport"
	    [ -n "$dport" ] && [ "x${dport}" != "x-" ] && \
		dports="--dport $dport"
	    ;;
	icmp|ICMP|0)
	    [ -n "$dport" ] && [ "x${dport}" != "x-" ] && \
		dports="--icmp-type $dport"
	    ;;
	all|ALL)
	    protocol=
	    ;;
	*)
	    ;;
    esac

    protocol="${protocol:+-p $protocol}"

    tos="-j TOS --set-tos $tos"

    case "$dstzone" in
    all|ALL)
	dst=0.0.0.0/0
	;;
    *)
	[ -z "$dst" ] && eval dst=\$${dstzone}_hosts
	;;
    esac

    for dest in $dst; do
	dest="$(dest_ip_range $dest)"

	case $srczone in
	$FW)
	    run_iptables2 -t mangle -A outtos \
		$protocol $dest $dports $sports $tos
	    ;;
	all|ALL)
	    run_iptables2 -t mangle -A outtos \
		$protocol $dest $dports $sports $tos
	    run_iptables2 -t mangle -A pretos \
		$protocol $dest $dports $sports $tos
	    ;;
	*)
	    if [ -n "$src" ]; then
		run_iptables2 -t mangle -A pretos $src \
		    $protocol $dest $dports $sports $tos
	    else
		eval interfaces=\$${srczone}_interfaces

		for interface in $interfaces; do
		    run_iptables2 -t mangle -A pretos -i $interface \
			$protocol $dest $dports $sports $tos
		done
	    fi
	    ;;
	esac
    done

    progress_message "   Rule \"$rule\" added."
}

#
# Process the tos file
#
process_tos() # $1 = name of tos file
{
    echo "Processing $1..."

    run_iptables -t mangle -N pretos
    run_iptables -t mangle -N outtos

    strip_file tos $1

    while read src dst protocol sport dport tos; do
	expandv src dst protocol sport dport tos
	rule="$(echo $src $dst $protocol $sport $dport $tos)"
	process_tos_rule
    done < $TMP_DIR/tos

    run_iptables -t mangle -A PREROUTING -j pretos
    run_iptables -t mangle -A OUTPUT	 -j outtos
}

#
# Display elements of a list with leading white space
#
display_list() # $1 = List Title, rest of $* = list to display
{
    [ $# -gt 1 ] && echo "   $*"
}

#
# Add policy rule ( and possibly logging rule) to the passed chain
#
policy_rules() # $1 = chain to add rules to
	       # $2 = policy
	       # $3 = loglevel
{
    local target="$2"

    case "$target" in
	ACCEPT)
	    [ -n "$ACCEPT_common" ] && run_iptables -A $1 -j $ACCEPT_common
	    ;;
	DROP)
	    [ -n "$DROP_common" ] && run_iptables -A $1 -j $DROP_common
	    ;;
	REJECT)
	    [ -n "$REJECT_common" ] && run_iptables -A $1 -j $REJECT_common    
	    target=reject
	    ;;
	QUEUE)
	    [ -n "$QUEUE_common" ] && run_iptables -A $1 -j $QUEUE_common    
	    ;;
	CONTINUE)
	    target=
	    ;;
	*)
	    fatal_error "Invalid policy ($policy) for $1"
	    ;;
    esac

    if [ $# -eq 3 -a "x${3}" != "x-" ]; then
	log_rule $3 $1 $2 
    fi

    [ -n "$target" ] && run_iptables -A $1 -j $target
}

#
# Generate default policy & log level rules for the passed client & server
# zones
#
# This function is only called when the canonical chain for this client/server
# pair is known to exist. If the default policy for this pair specifies the
# same chain then we add the policy (and logging) rule to the canonical chain;
# otherwise add a rule to the canonical chain to jump to the appropriate
# policy chain.
#
default_policy() # $1 = client $2 = server
{
    local chain="${1}2${2}"
    local policy=
    local loglevel=
    local chain1

    jump_to_policy_chain() {
	#
	# Add a jump to from the canonical chain to the policy chain. On return,
	# $chain is set to the name of the policy chain
	#
	run_iptables -A $chain -j $chain1
	chain=$chain1
    }

    apply_default()
    {
	#
	# Generate policy file column values from the policy chain
	#
	eval policy=\$${chain1}_policy
	eval loglevel=\$${chain1}_loglevel
	eval synparams=\$${chain1}_synparams
	#
	# Add the appropriate rules to the canonical chain ($chain) to enforce
	# the specified policy

	if [ "$chain" = "$chain1" ]; then
	    #
	    # The policy chain is the canonical chain; add policy rule to it
	    # The syn flood jump has already been added if required.
	    #
	    policy_rules $chain $policy $loglevel
	else
	    #
	    # The policy chain is different from the canonical chain -- approach
	    # depends on the policy
	    #
	    case $policy in
	    ACCEPT|QUEUE)
		if [ -n "$synparams" ]; then
		    #
		    # To avoid double-counting SYN packets, enforce the policy
		    # in this chain.
		    #
		    enable_syn_flood_protection $chain $chain1
		    policy_rules $chain $policy $loglevel
		else
		    #
		    # No problem with double-counting so just jump to the
		    # policy chain.
		    #
		    jump_to_policy_chain
		fi
		;;
	    CONTINUE)
		#
		# Silly to jump to the policy chain -- add any logging
		# rules and enable SYN flood protection if requested
		#
		[ -n "$synparams" ] && \
		    enable_syn_flood_protection $chain $chain1
		policy_rules $chain $policy $loglevel
		;;
	    *)
		#
		# DROP or REJECT policy -- enforce in the policy chain and
		# enable SYN flood protection if requested.
		#
		[ -n "$synparams" ] && \
		    enable_syn_flood_protection $chain $chain1
		jump_to_policy_chain
		;;
	    esac
	fi

	progress_message "   Policy $policy for $1 to $2 using chain $chain"
    }

    eval chain1=\$${1}2${2}_policychain

    if [ -n "$chain1" ]; then
	apply_default $1 $2
    else
	fatal_error "No default policy for zone $1 to zone $2"
    fi
}

#
# Complete a standard chain
#
#	- run any supplied user exit
#	- search the policy file for an applicable policy and add rules as
#	  appropriate
#	- If no applicable policy is found, add rules for an assummed
#	  policy of DROP INFO
#
complete_standard_chain() # $1 = chain, $2 = source zone, $3 = destination zone
{
    local policy=
    local loglevel=
    local policychain=

    run_user_exit $1

    eval policychain=\$${2}2${3}_policychain

    if [ -n "$policychain" ]; then
	eval policy=\$${policychain}_policy
	eval loglevel=\$${policychain}_loglevel

	policy_rules $1 $policy $loglevel
    else
	policy_rules $1 DROP INFO
    fi
}

#
# Find the appropriate chain to pass packets from a source zone to a
# destination zone
#
# If the canonical chain for this zone pair exists, echo it's name; otherwise
# locate and echo the name of the appropriate policy chain
#
rules_chain() # $1 = source zone, $2 = destination zone
{
    local chain=${1}2${2}

    havechain $chain && { echo $chain; return; }

    [ "$1" = "$2" ] && { echo ACCEPT; return; }

    eval chain=\$${chain}_policychain

    [ -n "$chain" ] && { echo $chain; return; }

    fatal_error "No policy defined for zone $1 to zone $2"
}

#
#  echo the list of networks routed out of a given interface
#
get_routed_networks() # $1 = interface name
{
    local address
    local rest

    ip route show dev $1 2> /dev/null |
	while read address rest; do
	    if [ "x$address" = xdefault ]; then
		error_message "Warning: default route ignored on interface $1"
	    else
		[ "$address" = "${address%/*}" ] && address="${address}/32"
		echo $address
	    fi
        done
}

#
# Set up Source NAT (including masquerading)
#
setup_masq()
{
    do_ipsec_options() {
	local options="$(separate_list $ipsec)" option 
	policy="-m policy --pol ipsec --dir out"

	for option in $options; do
	    case $option in
		[Yy]es)         ;;
		strict)         policy="$policy --strict" ;;
		next)           policy="$policy --next" ;;
		reqid=*)        policy="$policy --reqid ${option#*=}" ;;
		spi=*)          policy="$policy --spi ${option#*=}" ;;
		proto=*)        policy="$policy --proto ${option#*=}" ;;
		mode=*)         policy="$policy --mode ${option#*=}" ;;
		tunnel-src=*)   policy="$policy --tunnel-src ${option#*=}" ;;
		tunnel-dst=*)   policy="$policy --tunnel-dst ${option#*=}" ;;
		reqid!=*)       policy="$policy ! --reqid ${option#*=}" ;;
		spi!=*)         policy="$policy ! --spi ${option#*=}" ;;
		proto!=*)       policy="$policy ! --proto ${option#*=}" ;;
		mode!=*)        policy="$policy ! --mode ${option#*=}" ;;
		tunnel-src!=*)  policy="$policy ! --tunnel-src ${option#*=}" ;;
		tunnel-dst!=*)  policy="$policy ! --tunnel-dst ${option#*=}" ;;
		*)              fatal_error "Invalid IPSEC option \"$option\"" ;;
	    esac
	done
    }

    setup_one() {
	local add_snat_aliases=$ADD_SNAT_ALIASES pre_nat= policy= destnets=

	[ "x$ipsec" = x- ] && ipsec=

	case $ipsec in
	    Yes|yes)
		[ -n "$POLICY_MATCH" ] || \
		    fatal_error "IPSEC=Yes requires policy match support in your kernel and iptables"
		policy="-m policy --pol ipsec --dir out"
		;;
	    No|no)
		[ -n "$POLICY_MATCH" ] || \
		    fatal_error "IPSEC=No requires policy match support in your kernel and iptables"
		policy="-m policy --pol none --dir out"
		;;
	    *)
		if [ -n "$ipsec" ]; then
		    do_ipsec_options
		elif [ -n "$POLICY_MATCH" ]; then
		    policy="-m policy --pol none --dir out"
		fi
		;;
	esac

	case $fullinterface in
	    +*)
		pre_nat=Yes
		fullinterface=${fullinterface#+}
		;;
	esac

	case $fullinterface in
	    *::*)
		add_snat_aliases=
		destnets="${fullinterface##*:}"
		fullinterface="${fullinterface%:*}"
		;;		
	    *:*:*)
		# Both alias name and networks
		destnets="${fullinterface##*:}"
		fullinterface="${fullinterface%:*}"
		;;
	    *:)
		add_snat_aliases=
	        fullinterface=${fullinterface%:}
		;;
	    *:*)
		# Alias name OR networks
		case ${fullinterface#*:} in
		    *.*)
			# It's a networks
			destnets="${fullinterface#*:}"
			fullinterface="${fullinterface%:*}"
			;;
		    *)
			#it's an alias name
			;;
		esac
		;;
	    *)
		;;
	esac

	interface=${fullinterface%:*}

	if ! list_search $interface $ALL_INTERFACES; then
	    fatal_error "Unknown interface $interface"
	fi

	if [ "$networks" = "${networks%!*}" ]; then
	    nomasq=
	else
	    nomasq="${networks#*!}"
	    networks="${networks%!*}"
	fi


	source="$networks"

	case $source in
	*.*.*|+*|!+*)
	    ;;
	*)
	    networks=$(get_routed_networks $networks)
	    [ -z "$networks" ] && fatal_error "Unable to determine the routes through interface \"$source\""
	    networks="$networks"
	    ;;
	esac

	[ "x$addresses" = x- ] && addresses=	

	if [ -n "$addresses" -a -n "$add_snat_aliases" ]; then
	    for address in $(separate_list $addresses); do
		address=${address%:)}
		if [ -n "$address" ]; then
		    for addr in $(ip_range_explicit ${address%:*}) ; do
			if ! list_search $addr $aliases_to_add; then
			    [ -n "$RETAIN_ALIASES" ] || save_command qt ip addr del $addr dev $interface 
			    aliases_to_add="$aliases_to_add $addr $fullinterface"
			    case $fullinterface in
				*:*)
				    fullinterface=${fullinterface%:*}:$((${fullinterface#*:} + 1 ))
				    ;;
			    esac
			fi
		    done
		fi
	    done
	fi

	[ "x$proto" = x- ] && proto=
	[ "x$ports" = x- ] && ports=

	if [ -n "$proto" ]; then

	    displayproto="($proto)"

	    case $proto in
		tcp|TCP|udp|UDP|6|17)
		    if [ -n "$ports" ]; then
			displayproto="($proto $ports)"

			listcount=$(list_count $ports)

			if [ $listcount -gt 1 ]; then
			    case $ports in
				*:*)
				    if [ -n "$XMULTIPORT" ]; then
					if [ $(($listcount + $(list_count1 $(split $ports) ) )) -le 16 ]; then
					    ports="-m multiport --dports $ports"
					else
					    fatal_error "More than 15 entries in port list ($ports)"
					fi
				    else
					fatal_error "Port Range not allowed in list ($ports)"
				    fi
				    ;;
				*)
				    if [ -n "$MULTIPORT" ]; then
					[ $listcount -le 15 ] || fatal_error "More than 15 entries in port list ($ports)"
					ports="-m multiport --dports $ports"
				    else
					fatal_error "Port Ranges require multiport match support in your kernel ($ports)"
				    fi
				    ;;
			    esac
			else
			    ports="--dport $ports"
			fi
		    fi
		    ;;
		*)
		    [ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
		    ;;
	    esac
	    
	    proto="-p $proto"
	else
	    displayproto="(all)"
	    [ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
	fi	

	destination=${destnets:=0.0.0.0/0}

	[ -z "$pre_nat" ] && chain=$(masq_chain $interface) || chain=$(snat_chain $interface)

	case $destnets in
	    !*)
		newchain=masq${masq_seq}
		createnatchain $newchain
		destnets=${destnets#!}

		for destnet in $(separate_list $destnets); do
		    addnatrule $newchain $(dest_ip_range $destnet) -j RETURN
		done

		if [ -n "$networks" ]; then
		    for s in $networks; do
			addnatrule $chain $(source_ip_range $s) $proto $ports $policy -j $newchain
		    done
		    networks=
		else
		    addnatrule $chain -j $newchain
		fi

		masq_seq=$(($masq_seq + 1))
		chain=$newchain
		destnets=0.0.0.0/0
		proto=
		ports=
		policy=

		if [ -n "$nomasq" ]; then
		    for addr in $(separate_list $nomasq); do
			addnatrule $chain $(source_ip_range $addr) -j RETURN
		    done
		    source="$source except $nomasq"
		fi
		;;
	    *)
		if [ -n "$nomasq" ]; then
		    newchain=masq${masq_seq}
		    createnatchain $newchain

		    if [ -n "$networks" ]; then
			for s in $networks; do
			    for destnet in $(separate_list $destnets); do
				addnatrule $chain $(both_ip_ranges $s $destnet) $proto $ports -j $newchain
			    done
			done
		    else
			for destnet in $(separate_list $destnets); do
			    addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $newchain
			done
		    fi

		    masq_seq=$(($masq_seq + 1))
		    chain=$newchain
		    networks=
		    destnets=0.0.0.0/0
		    proto=
		    ports=
		    policy=

		    for addr in $(separate_list $nomasq); do
			addnatrule $chain $(source_ip_range $addr) -j RETURN
		    done

		    source="$source except $nomasq"
		fi
		;;
	esac

	addrlist=
	target=MASQUERADE

	if [ -n "$addresses" ]; then
	    case "$addresses" in
		SAME:nodst:*)
		    target="SAME --nodst"
		    addresses=${addresses#SAME:nodst:}
		    for address in $(separate_list $addresses); do
			addrlist="$addrlist --to $address";
		    done
		    ;;
		SAME:*)
		    target="SAME"
		    addresses=${addresses#SAME:}
		    for address in $(separate_list $addresses); do
			addrlist="$addrlist --to $address";
		    done
		    ;;
		*)
		    for address in $(separate_list $addresses); do
			case $address in
			    *.*.*.*)
				target=SNAT
				addrlist="$addrlist --to-source $address"
				;;
			    *)
				addrlist="$addrlist --to-ports ${address#:}"
				;;
			esac
		    done
		    ;;
	    esac
	fi

	if [ -n "$networks" ]; then
	    for network in $networks; do
		for destnet in $(separate_list $destnets); do
		    addnatrule $chain $(both_ip_ranges $network $destnet) $proto $ports $policy -j $target $addrlist
		done

		if [ -n "$addresses" ]; then
		    progress_message "   To $destination $displayproto from $network through ${interface} using $addresses"
		else
		    progress_message "   To $destination $displayproto from $network through ${interface}"
		fi
	    done
	else
	    for destnet in $(separate_list $destnets); do
		addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
	    done
	    
	    if [ -n "$addresses" ]; then
		progress_message "   To $destination $displayproto from $source through ${interface} using $addresses"
	    else
		progress_message "   To $destination $displayproto from $source through ${interface}"
	    fi
	fi

    }

    strip_file masq $1

    if [ -n "$NAT_ENABLED" ]; then
	echo "Masqueraded Networks and Hosts:"
	[ -n "$RETAIN_ALIASES" ] || save_progress_message "Restoring Masquerading/SNAT..."
    fi

    while read fullinterface networks addresses proto ports ipsec; do
	expandv fullinterface networks addresses proto ports ipsec
	[ -n "$NAT_ENABLED" ] && setup_one || \
	    error_message "Warning: NAT disabled; masq rule ignored"
    done < $TMP_DIR/masq
}

#
# Add a record to the blacklst chain
#
#   $source      = address match
#   $proto       = protocol selector
#   $dport       = destination port selector
#
add_blacklist_rule() {
    if [ "$COMMAND" != check ]; then
	if [ -n "$BLACKLIST_LOGLEVEL" ]; then
	    log_rule $BLACKLIST_LOGLEVEL blacklst $BLACKLIST_DISPOSITION  $(fix_bang $source $proto $dport)
	fi
	
	run_iptables2 -A blacklst $source $proto $dport -j $disposition
    fi
}

#
# Process a record from the blacklist file
#
#   $networks	 = address/networks
#   $protocol    = Protocol Number/Name
#   $port        = Port Number/Name
#
process_blacklist_rec() {
    local source
    local addr
    local proto
    local dport
    local temp
    local setname

    for addr in $(separate_list $networks); do
	case $addr in
	    ~*)
		addr=$(echo $addr | sed 's/~//;s/-/:/g')
		source="--match mac --mac-source $addr"
		;;
	    *)
		source="$(source_ip_range $addr)"
		;;
	esac

	if [ -n "$protocol" ]; then
	    proto=" -p $protocol "

	    case $protocol in
		tcp|TCP|6|udp|UDP|17)
		    if [ -n "$ports" ]; then
			if [ -n "$MULTIPORT" -a \
			    "$ports" != "${ports%,*}" -a \
			    "$ports" = "${ports%:*}" -a \
			    $(list_count $ports) -le 15 ]
			then
			    dport="-m multiport --dports $ports"
			    add_blacklist_rule
			else
			    for dport in $(separate_list $ports); do
				dport="--dport $dport"
				add_blacklist_rule
			    done
			fi
		    else
			add_blacklist_rule
		    fi
		    ;;
		icmp|ICMP|0)
		    if [ -n "$ports" ]; then
			for dport in $(separate_list $ports); do
			    dport="--icmp-type $dport"
			    add_blacklist_rule
			done
		    else
			add_blacklist_rule
		    fi
		    ;;
		*)
		    add_blacklist_rule
		    ;;
	    esac
	else
	    add_blacklist_rule
	fi

	if [ -n "$ports" ]; then
	    addr="$addr $protocol $ports"
	elif [ -n "$protocol" ]; then
	    addr="$addr $protocol"
	fi

	if [ "$COMMAND" = check ]; then
	    progress_message "   $addr" Verified
	else
	    progress_message "   $addr added to Black List"
	fi
    done
}

#
# Setup the Black List
#
setup_blacklist() {
    local hosts="$(find_hosts_by_option blacklist)"
    local f=$(find_file blacklist)
    local disposition=$BLACKLIST_DISPOSITION
    local ipsec policy

    if [ -n "$hosts" -a -f $f ]; then
	echo "Setting up Blacklisting..."

	strip_file blacklist $f

	createchain blacklst no

	[ -n "$BLACKLISTNEWONLY" ] && state="-m state --state NEW,INVALID" || state=
	
	for host in $hosts; do
	    ipsec=${host%^*}
	    host=${host#*^}
	    [ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	    interface=${host%%:*}
	    network=${host#*:}

	    for chain in $(first_chains $interface); do
		run_iptables -A $chain $state $(match_source_hosts $network) $policy -j blacklst
	    done
	    
	    [ $network = 0/0.0.0.0 ] && network= || network=":$network"

	    progress_message "   Blacklisting enabled on ${interface}${network}"
	done

	[ "$disposition" = REJECT ] && disposition=reject

	if [ -z "$DELAYBLACKLISTLOAD" ]; then
	    while read networks protocol ports; do
		expandv networks protocol ports
		process_blacklist_rec
	    done < $TMP_DIR/blacklist
	fi
    fi
}

#
# Refresh the Black List
#
refresh_blacklist() {
    local f=$(find_file blacklist)
    local disposition=$BLACKLIST_DISPOSITION

    if qt $IPTABLES -L blacklst -n ; then
	echo "Loading Black List..."

	strip_file blacklist $f

	[ "$disposition" = REJECT ] && disposition=reject

	run_iptables -F blacklst

	while read networks protocol ports; do
	    expandv networks protocol ports
	    process_blacklist_rec
	done < $TMP_DIR/blacklist
    fi
}

#
# Verify the Black List
#
validate_blacklist() {
    local f=$(find_file blacklist)
    local disposition=$BLACKLIST_DISPOSITION

    echo "Checking Black List..."

    strip_file blacklist $f

    [ "$disposition" = REJECT ] && disposition=reject

    while read networks protocol ports; do
	expandv networks protocol ports
	process_blacklist_rec
    done < $TMP_DIR/blacklist
}

#
# Verify that kernel has netfilter support
#
verify_os_version() {

    osversion=$(uname -r)

    case $osversion in
    2.4.*|2.5.*|2.6.*)
	;;
    *)
	startup_error "Shorewall version $version does not work with kernel version $osversion"
	;;
    esac

    [ $COMMAND = start -a -n "$(lsmod 2> /dev/null | grep '^ipchains')" ] && \
	startup_error "Shorewall can't start with the ipchains kernel module loaded - see FAQ #8"
}

#
# Add IP Aliases
#
add_ip_aliases()
{
    local addresses external interface inet cidr rest val

    address_details() 
    {
	#
	# Folks feel uneasy if they don't see all of the same
	# decoration on these IP addresses that they see when their
	# distro's net config tool adds them. In an attempt to reduce
	# the anxiety level, we have the following code which sets
	# the VLSM and BRD from an existing address in the same networks
	#
	# Get all of the lines that contain inet addresses with broadcast 
	#
	ip -f inet addr show $interface 2> /dev/null | grep 'inet.*brd' | while read inet cidr rest ; do
	    case $cidr in
		*/*)
		    if in_network $external $cidr; then
			echo "/${cidr#*/} brd $(broadcastaddress $cidr)"
			break
		    fi
		    ;;
	    esac
	done
    }

    do_one()
    {
	val=$(address_details)

	if [ -n "$RETAIN_ALIASES" ]; then
	    run_ip addr add ${external}${val} dev $interface $label
	    save_command qt ip addr add ${external}${val} dev $interface $label
	else
	    ensure_and_save_command ip addr add ${external}${val} dev $interface $label
	fi

	echo "$external $interface" >> ${STATEDIR}/nat
	[ -n "$label" ] && label="with $label"
	progress_message "   IP Address $external added to interface $interface $label"
    }

    set -- $aliases_to_add

    save_progress_message "Restoring IP Addresses..."

    while [ $# -gt 0 ]; do
	external=$1
	interface=$2
	label=

	if [ "$interface" != "${interface%:*}" ]; then
	    label="${interface#*:}"
	    interface="${interface%:*}"
	    label="label $interface:$label"
	fi

	shift;shift

	list_search $external $(find_interface_addresses $interface) || do_one
    done
}

#
# Load kernel modules required for Shorewall
#
load_kernel_modules()
{
    save_modules_dir=$MODULESDIR

    [ -z "$MODULESDIR" ] && \
	MODULESDIR=/lib/modules/$(uname -r)/kernel/net/ipv4/netfilter

    modules=$(find_file modules)

    if [ -f $modules -a -d $MODULESDIR ]; then
 	progress_message "Loading Modules..."
	. $modules
    fi

    MODULESDIR=$save_modules_dir
}

save_load_kernel_modules()
{

    modules=$(find_file modules)

    save_progress_message "Loading kernel modules..."
    save_command "reload_kernel_modules <<__EOF__"

    while read command; do
	case "$command" in
	    loadmodule*)
		save_command $command
		;;
	esac
    done < $modules
    
    save_command __EOF__
    save_command ""

}

# Verify that the 'ip' program is installed

verify_ip() {
    qt ip link ls ||\
	startup_error "Shorewall $version requires the iproute package ('ip' utility)"
}

# 
# Determine which optional facilities are supported by iptables/netfilter
#
determine_capabilities() {
    qt $IPTABLES -t nat    -L -n && NAT_ENABLED=Yes    || NAT_ENABLED=
    qt $IPTABLES -t mangle -L -n && MANGLE_ENABLED=Yes || MANGLE_ENABLED=

    CONNTRACK_MATCH=
    MULTIPORT=
    XMULTIPORT=
    POLICY_MATCH=
    PHYSDEV_MATCH=
    IPRANGE_MATCH=
    RECENT_MATCH=
    OWNER_MATCH=

    qt $IPTABLES -N fooX1234
    qt $IPTABLES -A fooX1234 -m conntrack --ctorigdst 192.168.1.1 -j ACCEPT             && CONNTRACK_MATCH=Yes
    qt $IPTABLES -A fooX1234 -p tcp -m multiport --dports 21,22 -j ACCEPT               && MULTIPORT=Yes
    qt $IPTABLES -A fooX1234 -p tcp -m multiport --dports 21:22 -j ACCEPT               && XMULTIPORT=Yes
    qt $IPTABLES -A fooX1234 -m policy --pol ipsec --dir in -j ACCEPT                   && POLICY_MATCH=Yes
    qt $IPTABLES -A fooX1234 -m physdev --physdev-in eth0 -j ACCEPT                     && PHYSDEV_MATCH=Yes
    qt $IPTABLES -A fooX1234 -m iprange --src-range 192.168.1.5-192.168.1.124 -j ACCEPT && IPRANGE_MATCH=Yes
    qt $IPTABLES -A fooX1234 -m recent --update -j ACCEPT                               && RECENT_MATCH=Yes
    qt $IPTABLES -A fooX1234 -m owner --cmd-owner foo -j ACCEPT                         && OWNER_MATCH=Yes

    if [ -n "$PKTTYPE" ]; then
	qt $IPTABLES -A fooX1234 -m pkttype --pkt-type broadcast -j ACCEPT || PKTTYPE=
    fi
    
    qt $IPTABLES -F fooX1234
    qt $IPTABLES -X fooX1234
}

report_capability() # $1 = Capability Description , $2 Capability Setting (if any)
{
    local setting=

    [ "x$2" = "xYes" ] && setting="Available" || setting="Not available"

    echo "  " $1: $setting
}

report_capabilities() {
    echo "Shorewall has detected the following iptables/netfilter capabilities:"
    report_capability "NAT" $NAT_ENABLED
    report_capability "Packet Mangling" $MANGLE_ENABLED
    report_capability "Multi-port Match" $MULTIPORT
    [ -n "$MULTIPORT" ] && report_capability "Extended Multi-port Match" $XMULTIPORT
    report_capability "Connection Tracking Match" $CONNTRACK_MATCH
    report_capability "Packet Type Match" $PKTTYPE
    report_capability "Policy Match" $POLICY_MATCH
    report_capability "Physdev Match" $PHYSDEV_MATCH
    report_capability "IP range Match" $IPRANGE_MATCH
    report_capability "Recent Match" $RECENT_MATCH
    report_capability "Owner Match" $OWNER_MATCH
}

#
# Perform Initialization
#	- Delete all old rules
#	- Delete all user chains
#	- Set the POLICY on all standard chains and add a rule to allow packets
#	  that are part of established connections
#	- Determine the zones
#
initialize_netfilter () {

    report_capabilities

    if [ -n "$BRIDGING" ]; then
	[ -n "$PHYSDEV_MATCH" ] || startup_error "BRIDGING=Yes requires Physdev Match support in your Kernel and iptables"
    fi

    [ "$MACLIST_TTL" = "0" ] && MACLIST_TTL=

    if [ -n "$MACLIST_TTL" -a -z "$RECENT_MATCH" ]; then
	startup_error "MACLIST_TTL requires the Recent Match capability which is not present in your Kernel and/or iptables"
    fi

    [ -n "$RFC1918_STRICT" -a -z "$CONNTRACK_MATCH" ] && \
	startup_error "RFC1918_STRICT=Yes requires Connection Tracking match"

    echo "Determining Zones..."

    determine_zones
    check_duplicate_zones

    [ -z "$zones" ] && startup_error "No Zones Defined"

    display_list "Zones:" $zones

    echo "Validating interfaces file..."

    validate_interfaces_file

    echo "Validating hosts file..."

    validate_hosts_file

    echo "Validating Policy file..."

    validate_policy

    echo "Determining Hosts in Zones..."

    determine_interfaces
    determine_hosts

    run_user_exit init

    #
    # Some files might be large so strip them while the firewall is still running
    # (restart command). This reduces the length of time that the firewall isn't
    # accepting new connections.
    #

    strip_file rules
    strip_file proxyarp
    strip_file maclist
    strip_file nat
    strip_file netmap

    echo "Pre-processing Actions..."
    process_actions1

    terminator=fatal_error

    deletechain shorewall

    [ -n "$NAT_ENABLED" ] && delete_nat

    delete_proxy_arp

    [ -n "$MANGLE_ENABLED" ] && \
	run_iptables -t mangle -F && \
	run_iptables -t mangle -X

    [ -n "$CLEAR_TC" ] && delete_tc

    echo "Deleting user chains..."

    exists_INPUT=Yes
    exists_OUTPUT=Yes
    exists_FORWARD=Yes
    setpolicy INPUT DROP
    setpolicy OUTPUT DROP
    setpolicy FORWARD DROP

    deleteallchains

    setcontinue FORWARD
    setcontinue INPUT
    setcontinue OUTPUT

    f=$(find_file ipsets)

    if [ -f $f ]; then
	echo "Processing $f ..."
	ipset -U :all: :all:
	run_ipset -F
	run_ipset -X
	run_ipset -R < $f
    fi

    run_user_exit continue

    f=$(find_file routestopped)

    echo "Processing $f ..."

    strip_file routestopped $f

    process_routestopped -A

    [ -n "$DISABLE_IPV6" ] && disable_ipv6

    #
    # Enable the Loopback interface for now
    #
    run_iptables -A INPUT  -i lo -j ACCEPT
    run_iptables -A OUTPUT -o lo -j ACCEPT

    #
    # Allow DNS lookups during startup for FQDNs
    #

    for chain in INPUT OUTPUT FORWARD; do
	run_iptables -A $chain -p udp --dport 53 -j ACCEPT
	[ -n "$DROPINVALID" ] && \
	    run_iptables -A $chain -p ! icmp -m state --state INVALID -j DROP
    done

    if [ -n "$CLAMPMSS" ]; then
	case $CLAMPMSS in
	    Yes)
		option="--clamp-mss-to-pmtu"
		;;
	    *)
		option="--set-mss $CLAMPMSS"
		;;
	esac

	run_iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS $option
    fi

    accounting_file=$(find_file accounting)

    [ -f $accounting_file ] && setup_accounting $accounting_file

    if [ -z "$NEWNOTSYN" ]; then
	createchain newnotsyn no

	for host in $(find_hosts_by_option newnotsyn); do
	    ipsec=${host%^*}
	    host=${host#*^}
	    [ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	    interface=${host%%:*}
	    network=${host#*:}
	    run_iptables -A newnotsyn -i $interface $(match_source_hosts $network) $policy -p tcp --tcp-flags ACK ACK -j ACCEPT
	    run_iptables -A newnotsyn -i $interface $(match_source_hosts $network) $policy -p tcp --tcp-flags RST RST -j ACCEPT
	    run_iptables -A newnotsyn -i $interface $(match_source_hosts $network) $policy -p tcp --tcp-flags FIN FIN -j ACCEPT
	    run_iptables -A newnotsyn -i $interface $(match_source_hosts $network) $policy -j RETURN
	done

	run_user_exit newnotsyn

	if [ -n "$LOGNEWNOTSYN" ]; then
	    log_rule $LOGNEWNOTSYN newnotsyn DROP
	fi

	run_iptables -A newnotsyn -j DROP
    fi

    createchain icmpdef no
    createchain reject	no
    createchain dynamic no
    createchain smurfs no

    if [ -f /var/lib/shorewall/save ]; then
	echo "Restoring dynamic rules..."
	
	if [ -f /var/lib/shorewall/save ]; then
	    while read target ignore1 ignore2 address rest; do
		case $target in
		    DROP|reject)
			run_iptables -A dynamic -s $address -j $target
			;;
		    *)
			;;
		esac
	    done < /var/lib/shorewall/save
	fi
    fi

    [ -n "$BLACKLISTNEWONLY" ] && state="-m state --state NEW,INVALID" || state=

    echo "Creating Interface Chains..."

    for interface in $ALL_INTERFACES; do
	createchain $(forward_chain $interface) no
	run_iptables -A $(forward_chain $interface) $state -j dynamic
	createchain $(input_chain $interface)   no
	run_iptables -A $(input_chain $interface) $state -j dynamic
    done
}

#
# Construct zone-independent rules
#
add_common_rules() {
    local savelogparms="$LOGPARMS"
    local broadcasts="$(find_broadcasts) 255.255.255.255 224.0.0.0/4"

    drop_broadcasts() {
	for address in $broadcasts ; do
	    run_iptables -A reject -d $address -j DROP
	done
    }

    #
    # Populate the smurf chain
    #
    for address in $broadcasts ; do
	[ -n "$SMURF_LOG_LEVEL" ] && log_rule $SMURF_LOG_LEVEL smurfs DROP -s $address
	run_iptables -A smurfs $(source_ip_range $address) -j DROP
    done
    #
    # Reject Rules -- Don't respond to broadcasts with an ICMP
    #
    if [ -n "$PKTTYPE" ]; then
	qt $IPTABLES -A reject -m pkttype --pkt-type broadcast -j DROP
	if ! qt $IPTABLES -A reject -m pkttype --pkt-type multicast -j DROP; then
            #
	    # No pkttype support -- do it the hard way
	    #
	    drop_broadcasts
	fi
    else
	drop_broadcasts
    fi
    #
    # Don't feed the smurfs
    #
    for address in $broadcasts ; do
	run_iptables -A reject -s $address -j DROP
    done    

    run_iptables -A reject -p tcp  -j REJECT --reject-with tcp-reset
    run_iptables -A reject -p udp  -j REJECT
    #
    # Not all versions of iptables support these so don't complain if they don't work
    #
    qt $IPTABLES  -A reject -p icmp -j REJECT --reject-with icmp-host-unreachable
    if ! qt $IPTABLES -A reject -j REJECT --reject-with icmp-host-prohibited; then
	#
	# In case the above doesn't work
	#
	run_iptables -A reject -j REJECT
    fi

    #
    # Create common action chains
    #
    for action in $USEDACTIONS; do
	createactionchain $action
    done

    run_user_exit initdone

    #
    # Process Black List
    #
    setup_blacklist

    #
    # SMURFS
    #
    hosts=$(find_hosts_by_option nosmurfs)

    if [ -n "$hosts" ]; then
	
	echo "Adding Anti-smurf Rules"

	for host in $hosts; do
	    ipsec=${host%^*}
	    host=${host#*^}
	    [ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	    interface=${host%%:*}
	    network=${host#*:}

	    for chain in $(first_chains $interface); do
		run_iptables -A $chain  -m state --state NEW,INVALID $(match_source_hosts $network) $policy -j smurfs
	    done
	done
    fi
    #
    # DHCP
    #
    interfaces=$(find_interfaces_by_option dhcp)

    if [ -n "$interfaces" ]; then

	echo "Adding rules for DHCP"

	for interface in $interfaces; do
	    if [ -n "$BRIDGING" ]; then
		eval is_bridge=\$$(chain_base $interface)_ports
		[ -n "$is_bridge" ] && \
		    $IPTABLES -A $(forward_chain $interface) -p udp -o $interface --dport 67:68 -j ACCEPT
            fi
	    run_iptables -A $(input_chain $interface) -p udp --dport 67:68 -j ACCEPT
	    run_iptables -A OUTPUT -o $interface      -p udp --dport 67:68 -j ACCEPT
	done
    fi
    #
    # RFC 1918
    #
    hosts="$(find_hosts_by_option norfc1918)"

    if [ -n "$hosts" ]; then
	echo "Enabling RFC1918 Filtering"

	strip_file rfc1918

	createchain norfc1918 no

	createchain rfc1918 no
	
	log_rule $RFC1918_LOG_LEVEL rfc1918 DROP
	
	run_iptables -A rfc1918 -j DROP

	chain=norfc1918

	if [ -n "$RFC1918_STRICT" ]; then
	    #
	    # We'll generate two chains - one for source and one for destination
	    #
	    chain=rfc1918d
	    createchain $chain no	    
	elif [ -n "$MANGLE_ENABLED" -a -z "$CONNTRACK_MATCH" ]; then
	    #
	    # Mangling is enabled but conntrack match isn't available -- 
	    # create a chain in the mangle table to filter RFC1918 destination
            # addresses. This must be done in the mangle table before we apply
	    # any DNAT rules in the nat table
	    #
	    # Also add a chain to log and drop any RFC1918 packets that we find
	    #
	    run_iptables -t mangle -N man1918
	    run_iptables -t mangle -N rfc1918
	    log_rule $RFC1918_LOG_LEVEL rfc1918 DROP -t mangle
	    run_iptables -t mangle -A rfc1918 -j DROP
	fi

	while read networks target; do
	    case $target in
		logdrop)
		    target=rfc1918
		    s_target=rfc1918
		    ;;
		DROP)
		    s_target=DROP
		    ;;
		RETURN)
		    [ -n "$RFC1918_STRICT" ] && s_target=rfc1918d || s_target=RETURN
		    ;;
		*)
		    fatal_error "Invalid target ($target) for $networks"
		    ;;
	    esac

	    for network in $(separate_list $networks); do
		run_iptables2 -A norfc1918 $(source_ip_range $network) -j $s_target
	
		if [ -n "$CONNTRACK_MATCH" ]; then
		    #
		    # We have connection tracking match -- match on the original destination
		    #
		    run_iptables2 -A $chain -m conntrack --ctorigdst $network -j $target
		elif [ -n "$MANGLE_ENABLED" ]; then
		    #
		    # No connection tracking match but we have mangling -- add a rule to
		    # the mangle table
		    #
		    run_iptables2 -t mangle -A man1918 $(dest_ip_range $network) -j $target
		fi
	    done
	done < $TMP_DIR/rfc1918

	[ -n "$RFC1918_STRICT" ] && run_iptables -A norfc1918 -j rfc1918d
 
	for host in $hosts; do
	    ipsec=${host%^*}
	    host=${host#*^}
	    [ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	    interface=${host%%:*}
	    networks=${host#*:}

	    for chain in $(first_chains $interface); do
		run_iptables -A $chain -m state --state NEW $(match_source_hosts $networks) $policy -j norfc1918
	    done

	    [ -n "$MANGLE_ENABLED" -a -z "$CONNTRACK_MATCH" ] && \
		run_iptables -t mangle -A PREROUTING -m state --state NEW -i $interface $(match_source_hosts $networks) -j man1918
	done
    fi
    #
    # Bogons
    #
    hosts="$(find_hosts_by_option nobogons)"
    
    if [ -n "$hosts" ]; then
	echo "Enabling Bogon Filtering"

	strip_file bogons

	createchain nobogons no

	createchain bogons no
	
	log_rule $BOGON_LOG_LEVEL bogons DROP
	
	run_iptables -A bogons -j DROP

	while read networks target; do
	    case $target in
		logdrop)
		    target=bogons
		    ;;
		DROP|RETURN)
		    ;;
		*)
		    fatal_error "Invalid target ($target) for $networks"
		    ;;
	    esac

	    run_iptables2 -A nobogons $(source_ip_range $networks) -j $target

	done < $TMP_DIR/bogons

	for host in $hosts; do
	    ipsec=${host%^*}
	    host=${host#*^}
	    [ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	    interface=${host%%:*}
	    network=${host#*:}

	    for chain in $(first_chains $interface); do
		run_iptables -A $chain -m state --state NEW $(match_source_hosts $network) -j nobogons
	    done
	done

    fi

    hosts=$(find_hosts_by_option tcpflags)

    if [ -n "$hosts" ]; then
	echo "Setting up TCP Flags checking..."

	createchain tcpflags no

	if [ -n "$TCP_FLAGS_LOG_LEVEL" ]; then
	    createchain logflags no

	    savelogparms="$LOGPARMS"

	    LOGPARMS="$LOGPARMS --log-ip-options"

	    log_rule $TCP_FLAGS_LOG_LEVEL logflags $TCP_FLAGS_DISPOSITION 

	    LOGPARMS="$savelogparms"
	    
	    case $TCP_FLAGS_DISPOSITION in
		REJECT)
		    run_iptables -A logflags -j REJECT --reject-with tcp-reset
		    ;;
		*)
		    run_iptables -A logflags -j $TCP_FLAGS_DISPOSITION
		    ;;
	    esac

	    disposition="-j logflags"
	else
	    disposition="-j $TCP_FLAGS_DISPOSITION"
	fi

	run_iptables -A tcpflags -p tcp --tcp-flags ALL FIN,URG,PSH $disposition
	run_iptables -A tcpflags -p tcp --tcp-flags ALL NONE        $disposition
	run_iptables -A tcpflags -p tcp --tcp-flags SYN,RST SYN,RST $disposition
	run_iptables -A tcpflags -p tcp --tcp-flags SYN,FIN SYN,FIN $disposition
	#
	# There are a lot of probes to ports 80, 3128 and 8080 that use a source
	# port of 0. This catches them even if they are directed at an IP that
	# hosts a web server.
	#
	run_iptables -A tcpflags -p tcp --syn --sport 0             $disposition

	for host in $hosts; do
	    ipsec=${host%^*}
	    host=${host#*^}
	    [ -n "$POLICY_MATCH" ] && policy="-m policy --pol $ipsec --dir in" || policy=
	    interface=${host%%:*}
	    network=${host#*:}

	    for chain in $(first_chains $interface); do
		run_iptables -A $chain -p tcp $(match_source_hosts $network) $policy -j tcpflags
	    done
	done
    fi
    #
    # ARP Filtering
    #
    save_progress_message "Restoring ARP filtering..."

    for f in /proc/sys/net/ipv4/conf/*; do
	run_and_save_command "[ -f $f/arp_filter ] && echo 0 > $f/arp_filter"
    done

    interfaces=$(find_interfaces_by_option arp_filter)

    if [ -n "$interfaces" ]; then
	echo "Setting up ARP Filtering..."
	
	for interface in $interfaces; do
	    file=/proc/sys/net/ipv4/conf/$interface/arp_filter
	    if [ -f $file ]; then
		run_and_save_command "echo 1 > $file"
	    else
		error_message \
		    "Warning: Cannot set ARP filtering on $interface"
	    fi
	done
    fi
    #
    # Route Filtering
    #
    interfaces="$(find_interfaces_by_option routefilter)"

    if [ -n "$interfaces" -o -n "$ROUTE_FILTER" ]; then
	echo "Setting up Kernel Route Filtering..."

	save_progress_message "Restoring Route Filtering..."

	for f in /proc/sys/net/ipv4/conf/*; do
	    run_and_save_command "[ -f $f/rp_filter ]    && echo 0 > $f/rp_filter"
	done

	for interface in $interfaces; do
	    file=/proc/sys/net/ipv4/conf/$interface/rp_filter
	    if [ -f $file ]; then
		run_and_save_command "echo 1 > $file"
	    else
		error_message \
		    "Warning: Cannot set route filtering on $interface"
	    fi
	done
	
	run_and_save_command "echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter"

	if [ -n "$ROUTE_FILTER" ]; then
	    run_and_save_command "echo 1 > /proc/sys/net/ipv4/conf/default/rp_filter"
	    run_and_save_command "echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter"
	fi

	run_and_save_command ip route flush cache
    fi

    #
    # Martian Logging
    #
    interfaces="$(find_interfaces_by_option logmartians)"

    if [ -n "$interfaces" -o -n "$LOG_MARTIANS" ]; then
	echo "Setting up Martian Logging..."

	save_progress_message "Restoring Martian Logging..."

	for f in /proc/sys/net/ipv4/conf/*; do
	    run_and_save_command "[ -f $f/log_martians ]    && echo 0 > $f/log_martians"
	done

	for interface in $interfaces; do
	    file=/proc/sys/net/ipv4/conf/$interface/log_martians
	    if [ -f $file ]; then
		run_and_save_command "echo 1 > $file"
	    else
		error_message \
		    "Warning: Cannot set Martian logging on $interface"
	    fi
	done

	if [ -n "$LOG_MARTIANS" ]; then
	    run_and_save_command "echo 1 > /proc/sys/net/ipv4/conf/default/log_martians"
	    run_and_save_command "echo 1 > /proc/sys/net/ipv4/conf/all/log_martians"
	fi

    fi

    #
    # Source Routing
    #
    save_progress_message "Restoring Accept Source Routing..."

    for f in /proc/sys/net/ipv4/conf/*; do
	run_and_save_command "[ -f $f/accept_source_route ] && echo 0 > $f/accept_source_route"
    done

    interfaces=$(find_interfaces_by_option sourceroute)

    if [ -n "$interfaces" ]; then
	echo "Setting up Accept Source Routing..."
	
	for interface in $interfaces; do
	    file=/proc/sys/net/ipv4/conf/$interface/accept_source_route
	    if [ -f $file ]; then
		run_and_save_command "echo 1 > $file"
	    else
		error_message \
		    "Warning: Cannot set Accept Source Routing on $interface"
	    fi
	done
    fi

    if [ -n "$DYNAMIC_ZONES" ]; then
	echo "Setting up Dynamic Zone Chains..."

	for interface in $ALL_INTERFACES; do
	    for chain in $(dynamic_chains $interface); do
		createchain $chain no
	    done

	    chain=$(dynamic_in $interface)
	    createnatchain $chain

	    run_iptables -A $(input_chain $interface)   -j $chain
	    run_iptables -A $(forward_chain $interface) -j $(dynamic_fwd $interface)
	    run_iptables -A OUTPUT -o $interface        -j $(dynamic_out $interface)
	done
    fi
    #
    # UPnP
    #
    interfaces=$(find_interfaces_by_option upnp)

    if [ -n "$interfaces" ]; then
	echo "Setting up UPnP..."

	createnatchain UPnP
	
	for interface in $interfaces; do
	    run_iptables -t nat -A PREROUTING -i $interface -j UPnP
	done
    fi

    setup_forwarding
}

#
# Scan the policy file defining the necessary chains
# Add the appropriate policy rule(s) to the end of each canonical chain
#
apply_policy_rules() {
    #
    # Create policy chains
    #
    for chain in $all_policy_chains; do
	eval policy=\$${chain}_policy
	eval loglevel=\$${chain}_loglevel
	eval synparams=\$${chain}_synparams

	[ -n "$synparams" ] && setup_syn_flood_chain $chain $synparams $loglevel

	if havechain $chain; then
	    [ -n "$synparams" ] && \
		run_iptables -I $chain 2 -p tcp --syn -j @$chain
	else
	    #
	    # The chain doesn't exist. Create the chain and add policy
	    # rules
	    #
	    # We must include the ESTABLISHED and RELATED state
	    # rule here to account for replys and reverse
	    # related sessions associated with sessions going
	    # in the other direction
	    #
	    createchain $chain yes

	    #
	    # If either client or server is 'all' then this MUST be
	    # a policy chain and we must apply the appropriate policy rules
	    #
	    # Otherwise, this is a canonical chain which will be handled in
	    # the for loop below
	    #
	    case $chain in
		all2*|*2all)
		    policy_rules $chain $policy $loglevel
		    ;;
	    esac

	    [ -n "$synparams" ] && \
		[ $policy = ACCEPT -o $policy = CONTINUE ] && \
		run_iptables -I $chain 2 -p tcp --syn -j @$chain
	fi

    done

    #
    # Add policy rules to canonical chains
    #
    for zone in $FW $zones; do
	for zone1 in $FW $zones; do
	    chain=${zone}2${zone1}
	    if havechain $chain; then
		run_user_exit $chain
		default_policy $zone $zone1
	    fi
	done
    done
}

#
# Activate the rules
#
activate_rules()
{
    local PREROUTING_rule=1
    local POSTROUTING_rule=1
    #
    # Jump to a NAT chain from one of the builtin nat chains
    #
    addnatjump() # $1 = BUILTIN chain, $2 = user chain, $3 - * other arguments
    {
	local sourcechain=$1 destchain=$2
	shift
	shift

	if havenatchain $destchain ; then
	    run_iptables2 -t nat -A $sourcechain $@ -j $destchain
	else
	    [ -n "$BRIDGING" -a -f $TMP_DIR/physdev ]      && -rm -f $TMP_DIR/physdev
	    [ -n "$IPRANGE_MATCH" -a -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
	fi
    }

    #
    # Jump to a RULES chain from one of the builtin nat chains. These jumps are
    # are inserted before jumps to one-to-one NAT chains.
    #
    addrulejump() # $1 = BUILTIN chain, $2 = user chain, $3 - * other arguments
    {
	local sourcechain=$1 destchain=$2
	shift
	shift

	if havenatchain $destchain; then
	    eval run_iptables2 -t nat -I $sourcechain \
		\$${sourcechain}_rule $@ -j $destchain
	    eval ${sourcechain}_rule=\$\(\(\$${sourcechain}_rule + 1\)\)
	else 
	    [ -n "$BRIDGING" -a -f $TMP_DIR/physdev ]      && rm -f $TMP_DIR/physdev
	    [ -n "$IPRANGE_MATCH" -a -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange

	fi
    }    

    #
    # Add jumps to early SNAT chains
    #
    for interface in $ALL_INTERFACES; do
	addnatjump POSTROUTING $(snat_chain $interface) -o $interface
    done
    #
    # Add jumps for dynamic nat chains
    #
    [ -n "$DYNAMIC_ZONES" ] && for interface in $ALL_INTERFACES ; do
	addrulejump PREROUTING $(dynamic_in $interface) -i $interface
    done
    #
    # Add jumps from the builtin chains to the nat chains
    #
    addnatjump PREROUTING  nat_in
    addnatjump POSTROUTING nat_out

    for interface in $ALL_INTERFACES; do
	addnatjump PREROUTING  $(input_chain $interface)  -i $interface
	addnatjump POSTROUTING $(output_chain $interface) -o $interface
    done

    > ${STATEDIR}/chains
    > ${STATEDIR}/zones
    #
    # Create forwarding chains for complex zones and generate jumps for IPSEC source hosts to that chain.
    #
    for zone in $zones; do
	if eval test -n \"\$${zone}_is_complex\" ; then
	    frwd_chain=${zone}_frwd
	    createchain $frwd_chain No

	    if [ -n "$POLICY_MATCH" ]; then
	        eval is_ipsec=\$${zone}_is_ipsec

		if [ -n "$is_ipsec" ]; then
		    eval source_hosts=\$${zone}_hosts
		    if [ -n "$DYNAMIC_ZONES" ]; then
			createchain ${zone}_dyn No
			run_iptables -A $frwd_chain -j ${zone}_dyn
		    fi
		else
		    eval source_hosts=\$${zone}_ipsec_hosts
		fi

		for host in $source_hosts; do
		    interface=${host%%:*}
		    networks=${host#*:}
		    
		    run_iptables2 -A $(forward_chain $interface) $(match_source_hosts $networks) $(match_ipsec_in $zone $host) -j $frwd_chain
		done
	    fi
	fi
    done

    for zone in $zones; do
	eval source_hosts=\$${zone}_hosts

	chain1=$(rules_chain $FW $zone)
	chain2=$(rules_chain $zone $FW)

	eval complex=\$${zone}_is_complex

	[ -n "$complex" ] && frwd_chain=${zone}_frwd

	echo $zone $source_hosts >> ${STATEDIR}/zones
	
	if [ -n "$DYNAMIC_ZONES" ]; then
	    echo "$FW $zone $chain1" >> ${STATEDIR}/chains
	    echo "$zone $FW $chain2" >> ${STATEDIR}/chains
	fi

	need_broadcast=

	for host in $source_hosts; do
	    interface=${host%%:*}
	    networks=${host#*:}

	    run_iptables2 -A OUTPUT -o $interface $(match_dest_hosts $networks) $(match_ipsec_out $zone $host) -j $chain1

	    #
	    # Add jumps from the builtin chains for DNAT and SNAT rules
	    #
	    addrulejump PREROUTING  $(dnat_chain $zone) -i $interface $(match_source_hosts $networks) $(match_ipsec_in $zone $host)
	    addrulejump POSTROUTING $(snat_chain $zone) -o $interface $(match_dest_hosts $networks) $(match_ipsec_out $zone $host)

	    run_iptables2 -A $(input_chain $interface) $(match_source_hosts $networks) $(match_ipsec_in $zone $host) -j $chain2

	    if [ -n "$complex" ] && ! is_ipsec_host $zone $host ; then
                run_iptables2 -A $(forward_chain $interface) $(match_source_hosts $networks) $(match_ipsec_in $zone $host) -j $frwd_chain
	    fi

	    case $networks in
		*.*.*.*)
		    if [ "$networks" != 0.0.0.0/0 ]; then
			if ! list_search $interface $need_broadcast ; then
			    interface_has_option $interface detectnets && need_broadcast="$need_broadcast $interface"
			fi
		    fi
		    ;;
	    esac
	done

	for interface in $need_broadcast ; do
	    run_iptables -A OUTPUT -o $interface -d 255.255.255.255 -j $chain1
	    run_iptables -A OUTPUT -o $interface -d 224.0.0.0/4     -j $chain1
	done
   
	for zone1 in $zones; do

	    eval policy=\$${zone}2${zone1}_policy

	    [ "$policy" = NONE ] && continue

	    eval dest_hosts=\$${zone1}_hosts

	    chain="$(rules_chain $zone $zone1)"

	    [ -n "$DYNAMIC_ZONES" ] && echo "$zone $zone1 $chain" >> ${STATEDIR}/chains

	    if [ $zone = $zone1 ]; then
		#
		# Try not to generate superfluous intra-zone rules
		#
		eval routeback=\"\$${zone}_routeback\"
		eval interfaces=\"\$${zone}_interfaces\"
		eval ports="\$${zone}_ports"

		num_ifaces=$(list_count1 $interfaces)
		#
		# If the zone has a single interface then what matters is how many ports it has
		#
		[ $num_ifaces -eq 1 -a -n "$ports" ] && num_ifaces=$(list_count1 $ports)
		#
		# If we don't need to route back and if we have only one interface or one port to
		# the zone then assume that hosts in the zone can communicate directly.
		#
		if [ $num_ifaces -lt 2 -a -z "$routeback" ] ; then
		    continue
		fi
	    else
		routeback=
		num_ifaces=0
	    fi
	    
	    if [ -n "$complex" ]; then
		for host1 in $dest_hosts; do
		    interface1=${host1%%:*}
		    networks1=${host1#*:}
		    #
		    # Only generate an intrazone rule if the zone has more than one interface (port) or if
		    # routeback was specified for this host group
		    #
		    if [ $zone != $zone1 -o $num_ifaces -gt 1 ] || list_search $host1 $routeback ; then
			run_iptables2 -A $frwd_chain -o $interface1 $(match_dest_hosts $networks1) $(match_ipsec_out $zone1 $host1) -j $chain			
		    fi
		done
	    else
		for host in $source_hosts; do
		    interface=${host%%:*}
		    networks=${host#*:}
		    
		    chain1=$(forward_chain $interface)
		  
		    for host1 in $dest_hosts; do
			interface1=${host1%%:*}
			networks1=${host1#*:}

			if [ "$host" != "$host1" ] || list_search $host $routeback; then
			    run_iptables2 -A $chain1 $(match_source_hosts $networks) -o $interface1 $(match_dest_hosts $networks1) $(match_ipsec_out $zone1 $host1) -j $chain
			fi
		    done
		done
	    fi
	done
    done
    
    for interface in $ALL_INTERFACES ; do
	run_iptables -A FORWARD -i $interface -j $(forward_chain $interface)
	run_iptables -A INPUT   -i $interface -j $(input_chain $interface)
	addnatjump POSTROUTING $(masq_chain $interface) -o $interface
	#
        # Bridges under the 2.4 kernel have the wierd property that REJECTS have the physdev-in and physdev-out set to the input physdev.
        # To accomodate this feature/bug, we effectively set 'routeback' on bridge ports.
	#
	eval ports=\$$(chain_base $interface)_ports
	for port in $ports; do
	    run_iptables -A $(forward_chain $interface) -o $interface -m physdev --physdev-in $port --physdev-out $port -j ACCEPT
	done
    done

    chain=${FW}2${FW}

    if havechain $chain; then
	#
	# There is a fw->fw chain. Send loopback output through that chain
	#
	run_ip link ls | grep LOOPBACK | while read ordinal interface rest ; do
	    run_iptables -A OUTPUT -o ${interface%:*} -j $chain
	done
	#
	# And delete the unconditional ACCEPT rule
	#
	run_iptables -D OUTPUT -o lo -j ACCEPT
    fi

    complete_standard_chain INPUT all $FW
    complete_standard_chain OUTPUT $FW all
    complete_standard_chain FORWARD all all
    #
    # Remove rules added to keep the firewall alive during [re]start"
    #
    for chain in INPUT OUTPUT FORWARD; do
	run_iptables -D $chain -m state --state ESTABLISHED,RELATED -j ACCEPT
	run_iptables -D $chain -p udp --dport 53 -j ACCEPT
    done
 
    process_routestopped -D

    if [ -n "$LOGALLNEW" ]; then
	for table in mangle nat filter; do
	    case $table in
		mangle)
		    chains="PREROUTING INPUT FORWARD POSTROUTING"
		    ;;
		nat)
		    chains="PREROUTING POSTROUTING OUTPUT"
		    ;;
		*)
		    chains="INPUT FORWARD OUTPUT"
		    ;;
	    esac

	    for chain in $chains; do
		log_rule_limit $LOGALLNEW $chain $table $chain "" "" -I -m state --state NEW -t $table
	    done
	done
    fi
}

#
# Check for disabled startup
#
check_disabled_startup() {
    if [ -z "$STARTUP_ENABLED" ]; then
	echo "   Shorewall Startup is disabled -- to enable startup"
	echo "   after you have completed Shorewall configuration,"
	echo "   change the setting of STARTUP_ENABLED to Yes in"
        echo "   /etc/shorewall/shorewall.conf"

	[ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
	my_mutex_off
	exit 2
    fi
}

#
# Start/Restart the Firewall
#
define_firewall() # $1 = Command (Start or Restart)
{
    check_disabled_startup

    echo "${1}ing Shorewall..."

    verify_os_version
    verify_ip

    [ -d /var/lib/shorewall ] || { mkdir -p /var/lib/shorewall ; chmod 700 /var/lib/shorewall; }

    RESTOREBASE=$(mktempfile /var/lib/shorewall)

    [ -n "$RESTOREBASE" ] || startup_error "Cannot create temporary file in /var/lib/shorewall"

    echo '#bin/sh' >> $RESTOREBASE
    save_command "#"
    save_command "# Restore base file generated by Shorewall $version - $(date)"
    save_command "#"
    save_command ". /usr/share/shorewall/functions"

    f=$(find_file params)

    [ -f $f ] && \
	save_command ". $f"

    save_command "#"
    save_command "MODULESDIR=\"$MODULESDIR\""
    save_command "MODULE_SUFFIX=\"$MODULE_SUFFIX\""

    save_load_kernel_modules

    echo "Initializing...";                    initialize_netfilter
    echo "Configuring Proxy ARP";              setup_proxy_arp
    echo "Setting up NAT...";                  setup_nat
    echo "Setting up NETMAP...";               setup_netmap
    echo "Adding Common Rules";                add_common_rules

    tunnels=$(find_file tunnels)
    [ -f $tunnels ] && \
	echo "Processing $tunnels..." &&       setup_tunnels $tunnels

    ipsecfile=$(find_file ipsec)
    [ -f $ipsecfile ] && \
	echo "Processing $ipsecfile..." &&     setup_ipsec $ipsecfile

    maclist_hosts=$(find_hosts_by_option maclist)
    [ -n "$maclist_hosts" ] &&                 setup_mac_lists

    echo "Processing $(find_file rules)...";   process_rules
    echo "Processing Actions...";              process_actions2
                                               process_actions3
    echo "Processing $(find_file policy)...";  apply_policy_rules

    masq=$(find_file masq)
    [ -f $masq ] &&                            setup_masq $masq

    tos=$(find_file tos)
    [ -f $tos ] && [ -n "$MANGLE_ENABLED" ] && process_tos $tos

    ecn=$(find_file ecn)
    [ -f $ecn ] && [ -n "$MANGLE_ENABLED" ] && setup_ecn $ecn

    [ -n "$TC_ENABLED" ] &&                    setup_tc

    echo "Activating Rules...";                activate_rules

    [ -n "$aliases_to_add" ] && \
	echo "Adding IP Addresses..." &&       add_ip_aliases

    for file in chains nat proxyarp zones; do
	append_file $file
    done

    save_progress_message "Restoring Netfilter Configuration..."

    save_command 'iptables-restore << __EOF__'

    # 'shorewall save' appends the iptables-save output and '__EOF__'

    mv -f $RESTOREBASE /var/lib/shorewall/restore-base-$$

    > $RESTOREBASE

    save_command "#"
    save_command "# Restore tail file generated by Shorewall $version - $(date)"
    save_command "#"
    save_command "date > $STATEDIR/restarted"

    run_user_exit start

    [ -n "$DELAYBLACKLISTLOAD" ] && refresh_blacklist

    createchain shorewall no

    date > $STATEDIR/restarted

    report "Shorewall ${1}ed"

    rm -rf $TMP_DIR

    mv -f /var/lib/shorewall/restore-base-$$ /var/lib/shorewall/restore-base
    mv -f $RESTOREBASE /var/lib/shorewall/restore-tail    

    run_user_exit started
}

#
# Refresh the firewall
#
refresh_firewall()
{
    echo "Refreshing Shorewall..."

    echo "Determining Zones and Interfaces..."

    determine_zones

    validate_interfaces_file

    [ -z "$zones" ] && startup_error "No Zones Defined"

    determine_interfaces

    run_user_exit refresh

    #
    # Blacklist
    #
    refresh_blacklist

    ecn=$(find_file ecn)

    [ -f $ecn ] && [ -n "$MANGLE_ENABLED" ] && setup_ecn $ecn
    #
    # Refresh Traffic Control
    #
    [ -n "$TC_ENABLED" ] && refresh_tc

    report "Shorewall Refreshed"

    rm -rf $TMP_DIR
}

#
# Add a host or networks to a zone
#
add_to_zone() # $1...${n-1} = <interface>[:<hosts>] $n = zone
{
    local interface host zone z h z1 z2 chain
    local dhcp_interfaces blacklist_interfaces maclist_interfaces tcpflags_interfaces
    local rulenum source_chain dest_hosts iface hosts hostlist=

    nat_chain_exists() # $1 = chain name
    {
	qt $IPTABLES -t nat -L $1 -n
    }

    do_iptables() # $@ = command
    {
	[ -n "$BRIDGING" ]      && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
	[ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange

	if ! $IPTABLES $@ ; then
	    error_message "Can't add $newhost to zone $zone"
	fi
    }

    #
    # Load $zones
    #
    determine_zones
    #
    # Validate Interfaces File
    #
    validate_interfaces_file
    #
    # Validate Hosts File
    #
    validate_hosts_file
    #
    # Validate IPSec File
    #
    f=$(find_file ipsec)

    [ -f $f ] && setup_ipsec $f
    #
    # Normalize host list
    #
    while [ $# -gt 1 ]; do
	interface=${1%%:*}
	host=${1#*:}
        #
        # Be sure that the interface was dynamic at last [re]start
        #
	if ! chain_exists $(input_chain $interface) ; then
	    startup_error "Unknown interface $interface"
	fi

	if ! chain_exists $(dynamic_in $interface) ; then
	    startup_error "At last Shorewall [re]start, DYNAMIC_ZONES=No in shorewall.conf"
	fi

	if [ -z "$host" ]; then
	    hostlist="$hostlist $interface:0.0.0.0/0"
	else
	    for h in $(separate_list $host); do
		hostlist="$hostlist $interface:$h"
	    done
	fi

	shift
    done
    #
    # Validate Zone
    #
    zone=$1

    validate_zone $zone || startup_error "Unknown zone: $zone"

    [ "$zone" = $FW ] && startup_error "Can't add $1 to firewall zone"

    #
    # Be sure that Shorewall has been restarted using a DZ-aware version of the code
    #
    [ -f ${STATEDIR}/chains ] || startup_error "${STATEDIR}/chains -- file not found"
    [ -f ${STATEDIR}/zones ]  || startup_error "${STATEDIR}/zones -- file not found"
    #
    # Check for duplicates and create a new zone state file
    #
    > ${STATEDIR}/zones_$$

    while read z hosts; do
	if [ "$z" = "$zone" ]; then
	    for h in $hosts; do
		for host in $hostlist; do
		    if [ "$h" = "$host" ]; then
			rm -f ${STATEDIR}/zones_$$
			startup_error "$host already in zone $zone"
		    fi
		done
	    done
	    
	    [ -z "$hosts" ] && hosts=$hostlist || hosts="$hosts $hostlist"
	fi

	eval ${z}_hosts=\"$hosts\"
	
	echo "$z $hosts" >> ${STATEDIR}/zones_$$
    done < ${STATEDIR}/zones

    mv -f ${STATEDIR}/zones_$$ ${STATEDIR}/zones

    terminator=fatal_error
    #
    # Create a new Zone state file
    #
    for newhost in $hostlist; do
        #
        # Isolate interface and host parts
        #
	interface=${newhost%%:*}
	host=${newhost#*:}
        #
        # If the zone passed in the command has a dnat chain then insert a rule in
        # the nat table PREROUTING chain to jump to that chain when the source
        # matches the new host(s)#
        #
	chain=${zone}_dnat

	if nat_chain_exists $chain; then
	    do_iptables -t nat -A $(dynamic_in $interface) $(source_ip_range $host) $(match_ipsec_in $zone $newhost) -j $chain
	fi
        #
        # Insert new rules into the filter table for the passed interface
        #
	while read z1 z2 chain; do
	    if [ "$z1" = "$zone" ]; then
		if [ "$z2" = "$FW" ]; then
		    do_iptables -A $(dynamic_in $interface) $(match_source_hosts $host) $(match_ipsec_in $z1 $newhost) -j $chain
		else
		    source_chain=$(dynamic_fwd $interface)
		    if is_ipsec_host $z1 $newhost ; then
			do_iptables -A $source_chain $(match_source_hosts $host) $(match_ipsec_in $z1 $newhost) -j ${z1}_frwd
		    else
			eval dest_hosts=\"\$${z2}_hosts\"

			for h in $dest_hosts; do
			    iface=${h%%:*}
			    hosts=${h#*:}
			    
			    if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
				do_iptables -A $source_chain $(match_source_hosts $host) -o $iface $(match_dest_hosts $hosts) $(match_ipsec_out $z2 $h) -j $chain
			    fi
			done
		    fi
		fi
	    elif [ "$z2" = "$zone" ]; then
		if [ "$z1" = "$FW" ]; then
		    #
		    # Add a rule to the dynamic out chain for the interface
		    #
		    do_iptables -A $(dynamic_out $interface) $(match_dest_hosts $host) $(match_ipsec_out $z2 $newhost) -j $chain
		else
		    eval source_hosts=\"\$${z1}_hosts\"

		    for h in $source_hosts; do
			iface=${h%%:*}
			hosts=${h#*:}

			if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
			    if is_ipsec_host $z1 $h; then
				do_iptables -A ${z1}_dyn -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $newhost) -j $chain
			    else
				do_iptables -A $(dynamic_fwd $iface) $(match_source_hosts $hosts) -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $newhost) -j $chain
			    fi
			fi
		    done
		fi
	    fi
	done < ${STATEDIR}/chains
    
	progress_message "$newhost added to zone $zone"
    
    done

    rm -rf $TMP_DIR
}

#
# Delete a host or networks from a zone
#
delete_from_zone() # $1 = <interface>[:<hosts>] $2 = zone
{
    local interface host zone z h z1 z2 chain delhost
    local dhcp_interfaces blacklist_interfaces maclist_interfaces tcpflags_interfaces
    local rulenum source_chain dest_hosts iface hosts hostlist=
    
    #
    # Load $zones
    #
    determine_zones
    #
    # Validate Interfaces File
    #
    validate_interfaces_file
    #
    # Validate Hosts File
    #
    validate_hosts_file
    #
    # Validate IPSec File
    #
    f=$(find_file ipsec)
   
    [ -f $f ] && setup_ipsec $f

    #
    # Normalize host list
    #
    while [ $# -gt 1 ]; do
	interface=${1%%:*}
	host=${1#*:}
        #
        # Be sure that the interface was dynamic at last [re]start
        #
	if ! chain_exists $(input_chain $interface) ; then
	    startup_error "Unknown interface $interface"
	fi

	if ! chain_exists $(dynamic_in $interface) ; then
	    startup_error "At last Shorewall [re]start, DYNAMIC_ZONES=No in shorewall.conf"
	fi

	if [ -z "$host" ]; then
	    hostlist="$hostlist $interface:0.0.0.0/0"
	else
	    for h in $(separate_list $host); do
		hostlist="$hostlist $interface:$h"
	    done
	fi

	shift
    done
    #
    # Validate Zone
    #
    zone=$1

    validate_zone $zone || startup_error "Unknown zone: $zone"

    [ "$zone" = $FW ] && startup_error "Can't delete from the firewall zone"

    #
    # Be sure that Shorewall has been restarted using a DZ-aware version of the code
    #
    [ -f ${STATEDIR}/chains ] || startup_error "${STATEDIR}/chains -- file not found"
    [ -f ${STATEDIR}/zones ]  || startup_error "${STATEDIR}/zones -- file not found"
    #
    # Delete the passed hosts from the zone state file
    #
    > ${STATEDIR}/zones_$$

    while read z hosts; do
	if [ "$z" = "$zone" ]; then
	    temp=$hosts
	    hosts=
	    
	    for host in $hostlist; do
		found=
		for h in $temp; do
		    if [ "$h" = "$host" ]; then
			found=Yes
			break
		    fi
		done

		[ -n "$found" ] || error_message "Warning: $1 does not appear to be in zone $2"
	    done

	    for h in $temp; do
		found=
		for host in $hostlist; do
		    if [ "$h" = "$host" ]; then
			found=Yes
			break
		    fi
		done
		
		[ -n "$found" ] || hosts="$hosts $h"
	    done
	fi

	eval ${z}_hosts=\"$hosts\"

	echo "$z $hosts" >> ${STATEDIR}/zones_$$
    done < ${STATEDIR}/zones

    mv -f ${STATEDIR}/zones_$$ ${STATEDIR}/zones

    terminator=fatal_error

    for delhost in $hostlist; do
	interface=${delhost%%:*}
	host=${delhost#*:}
        #
        # Delete any nat table entries for the host(s)
        #
	qt_iptables -t nat -D $(dynamic_in $interface) $(match_source_hosts $host) $(match_ipsec_in $zone $delhost) -j ${zone}_dnat
        #
        # Delete rules rules the input chains for the passed interface
        #
	while read z1 z2 chain; do
	    if [ "$z1" = "$zone" ]; then
		if [ "$z2" = "$FW" ]; then
		    qt_iptables -D $(dynamic_in $interface) $(match_source_hosts $host) $(match_ipsec_in $z1 $delhost) -j $chain
		else
		    source_chain=$(dynamic_fwd $interface)
		    if is_ipsec_host $z1 $delhost ; then
			qt_iptables -D $source_chain $(match_source_hosts $host) $(match_ipsec_in $z1 $newhost) -j ${z1}_frwd
		    else
			eval dest_hosts=\"\$${z2}_hosts\"

			[ "$z2" = "$zone" ] && dest_hosts="$dest_hosts $hostlist"
		    
			for h in $dest_hosts; do
			    iface=${h%%:*}
			    hosts=${h#*:}
			    
			    if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
				qt_iptables -D $source_chain $(match_source_hosts $host) -o $iface $(match_dest_hosts $hosts) $(match_ipsec_out $z2 $h) -j $chain
			    fi
			done
		    fi
		fi
	    elif [ "$z2" = "$zone" ]; then
		if [ "$z1" = "$FW" ]; then
		    qt_iptables -D $(dynamic_out $interface) $(match_dest_hosts $host) $(match_ipsec_out $z2 $delhost) -j $chain
		else
		    eval source_hosts=\"\$${z1}_hosts\"
		    
		    for h in $source_hosts; do
			iface=${h%%:*}
			hosts=${h#*:}
			
			if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
				if is_ipsec_host $z1 $h; then
				    qt_iptables -D ${z1}_dyn -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $delhost) -j $chain
				else
				    qt_iptables -D $(dynamic_fwd $iface) $(match_source_hosts $hosts) -o $interface $(match_dest_hosts $host)  $(match_ipsec_out $z2 $delhost) -j $chain
				fi
			fi
		    done
		fi
	    fi
	done < ${STATEDIR}/chains

	progress_message "$delhost removed from zone $zone"

    done
    
    rm -rf $TMP_DIR
}

#
# Determine the value for a parameter that defaults to Yes
#
added_param_value_yes() # $1 = Parameter Name, $2 = Parameter value
{
    local val="$2"

    if [ -z "$val" ]; then
	echo "Yes"
    else case $val in
	[Yy][Ee][Ss])
	    echo "Yes"
	    ;;
	[Nn][Oo])
	    echo ""
	    ;;
	*)
	    startup_error "Invalid value ($val) for $1"
	    ;;
	esac
    fi
}

#
# Determine the value for a parameter that defaults to No
#
added_param_value_no() # $1 = Parameter Name, $2 = Parameter value
{
    local val="$2"

    if [ -z "$val" ]; then
	echo ""
    else case $val in
	[Yy][Ee][Ss])
	    echo "Yes"
	    ;;
	[Nn][Oo])
	    echo ""
	    ;;
	*)
	    startup_error "Invalid value ($val) for $1"
	    ;;
	esac
    fi
}

#
# Initialize this program
#
do_initialize() {
    
    # Run all utility programs using the C locale
    #
    # Thanks to Vincent Planchenault for this tip #

    export LC_ALL=C

    # Make sure umask is sane
    umask 177

    PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
    #
    # Establish termination function
    #
    terminator=startup_error
    #
    # Clear all configuration variables
    #
    version=
    IPTABLES=
    FW=
    SUBSYSLOCK=
    STATEDIR=
    ALLOWRELATED=Yes
    LOGRATE=
    LOGBURST=
    LOGPARMS=
    LOGLIMIT=
    ADD_IP_ALIASES=
    ADD_SNAT_ALIASES=
    TC_ENABLED=
    BLACKLIST_DISPOSITION=
    BLACKLIST_LOGLEVEL=
    CLAMPMSS=
    ROUTE_FILTER=
    LOG_MARTIANS=
    DETECT_DNAT_IPADDRS=
    MUTEX_TIMEOUT=
    NEWNOTSYN=
    LOGNEWNOTSYN=
    FORWARDPING=
    MACLIST_DISPOSITION=
    MACLIST_LOG_LEVEL=
    TCP_FLAGS_DISPOSITION=
    TCP_FLAGS_LOG_LEVEL=
    RFC1918_LOG_LEVEL=
    BOGON_LOG_LEVEL=
    MARK_IN_FORWARD_CHAIN=
    SHARED_DIR=/usr/share/shorewall
    FUNCTIONS=
    VERSION_FILE=
    LOGFORMAT=
    LOGRULENUMBERS=
    ADMINISABSENTMINDED=
    BLACKLISTNEWONLY=
    MODULE_SUFFIX=
    ACTIONS=
    USEDACTIONS=
    SMURF_LOG_LEVEL=
    DISABLE_IPV6=
    BRIDGING=
    DYNAMIC_ZONES=
    PKTTYPE=
    RETAIN_ALIASES=
    DELAYBLACKLISTLOAD=
    LOGTAGONLY=
    LOGALLNEW=
    DROPINVALID=
    RFC1918_STRICT=
    MACLIST_TTL=
    SAVE_IPSETS=
    RESTOREFILE=

    RESTOREBASE=
    TMP_DIR=
    ALL_INTERFACES=

    stopping=
    have_mutex=
    masq_seq=1
    nonat_seq=1
    aliases_to_add=

    FUNCTIONS=$SHARED_DIR/functions

    if [ -f $FUNCTIONS ]; then
	[ -n "$QUIET" ] || echo "Loading $FUNCTIONS..."
	. $FUNCTIONS
    else
	startup_error "$FUNCTIONS does not exist!"
    fi

    TMP_DIR=$(mktempdir)

    [ -n "$TMP_DIR" ] && chmod 700 $TMP_DIR || \
       startup_error "Can't create a temporary directory"

    trap "rm -rf $TMP_DIR; my_mutex_off; exit 2" 1 2 3 4 5 6 9

    ensure_config_path

    VERSION_FILE=$SHARED_DIR/version

    [ -f $VERSION_FILE ] && version=$(cat $VERSION_FILE)

    run_user_exit params

    config=$(find_file shorewall.conf)

    if [ -f $config ]; then
	if [ -r $config ]; then
	    [ -n "$QUIET" ] || echo "Processing $config..."
	    . $config
	else
	    echo "   ERROR: Cannot read $config (Hint: Are you root?)"
	    exit 2
	fi
    else
	echo "$config does not exist!" >&2
	exit 2
    fi
    #
    # Restore CONFIG_PATH if the shorewall.conf file cleared it
    #
    ensure_config_path
    #
    # Determine the capabilities of the installed iptables/netfilter
    # We load the kernel modules here to accurately determine 
    # capabilities when module autoloading isn't enabled.
    #

    [ -n "$MODULE_SUFFIX" ] || MODULE_SUFFIX="o gz ko o.gz ko.gz"
    load_kernel_modules

    if [ -z "$IPTABLES" ]; then
	IPTABLES=$(which iptables 2> /dev/null)

	[ -z "$IPTABLES" ] && startup_error "Can't find iptables executable"
    else
	[ -e "$IPTABLES" ] || startup_error "\$IPTABLES=$IPTABLES does not exist or is not executable"
    fi

    determine_capabilities

    [ -z "${STATEDIR}" ] && STATEDIR=/var/state/shorewall
   
    [ -d $STATEDIR ] || mkdir -p $STATEDIR

    [ -z "$FW" ] && FW=fw

    ALLOWRELATED="$(added_param_value_yes ALLOWRELATED $ALLOWRELATED)"
    [ -n "$ALLOWRELATED" ] || \
	startup_error "ALLOWRELATED=No is not supported"
    ADD_IP_ALIASES="$(added_param_value_yes ADD_IP_ALIASES $ADD_IP_ALIASES)"
    TC_ENABLED="$(added_param_value_yes TC_ENABLED $TC_ENABLED)"

    if [ -n "${LOGRATE}${LOGBURST}" ]; then
	LOGLIMIT="--match limit"
	[ -n "$LOGRATE" ]  && LOGLIMIT="$LOGLIMIT --limit $LOGRATE"
	[ -n "$LOGBURST" ] && LOGLIMIT="$LOGLIMIT --limit-burst $LOGBURST"
    fi

    if [ -n "$IP_FORWARDING" ]; then
	case "$IP_FORWARDING" in
	[Oo][Nn]|[Oo][Ff][Ff]|[Kk][Ee][Ee][Pp])
	    ;;
	*)
	    startup_error "Invalid value ($IP_FORWARDING) for IP_FORWARDING"
	    ;;
	esac
    else
	IP_FORWARDING=On
    fi

    if [ -n "$TC_ENABLED" -a -z "$MANGLE_ENABLED" ]; then
	startup_error "Traffic Control requires Mangle"
    fi

    [ -z "$BLACKLIST_DISPOSITION" ] && BLACKLIST_DISPOSITION=DROP
    
    case "$CLAMPMSS" in
	[0-9]*)
	    ;;
	*)
	    CLAMPMSS=$(added_param_value_no CLAMPMSS $CLAMPMSS)
	    ;;
    esac
    
    ADD_SNAT_ALIASES=$(added_param_value_no ADD_SNAT_ALIASES $ADD_SNAT_ALIASES)
    ROUTE_FILTER=$(added_param_value_no ROUTE_FILTER $ROUTE_FILTER)
    LOG_MARTIANS=$(added_param_value_no LOG_MARTIANS $LOG_MARTIANS)
    DETECT_DNAT_IPADDRS=$(added_param_value_no DETECT_DNAT_IPADDRS $DETECT_DNAT_IPADDRS)
    FORWARDPING=$(added_param_value_no FORWARDPING $FORWARDPING)
    [ -n "$FORWARDPING" ] && \
	startup_error "FORWARDPING=Yes is no longer supported"

    NEWNOTSYN=$(added_param_value_yes NEWNOTSYN $NEWNOTSYN)

    maclist_target=reject

    if [ -n "$MACLIST_DISPOSITION" ] ; then
	case $MACLIST_DISPOSITION in
	    REJECT)
		;;
	    ACCEPT|DROP)
		maclist_target=$MACLIST_DISPOSITION
		;;
	    *)
		startup_error "Invalid value ($MACLIST_DISPOSITION) for MACLIST_DISPOSITION"
		;;
	esac
    else
	MACLIST_DISPOSITION=REJECT
    fi

    if [ -n "$TCP_FLAGS_DISPOSITION" ] ; then
	case $TCP_FLAGS_DISPOSITION in
	    REJECT|ACCEPT|DROP)
		;;
	    *)
		startup_error "Invalid value ($TCP_FLAGS_DISPOSITION) for TCP_FLAGS_DISPOSITION"
		;;
	esac
    else
	TCP_FLAGS_DISPOSITION=DROP
    fi

    [ -z "$RFC1918_LOG_LEVEL" ] && RFC1918_LOG_LEVEL=info
    [ -z "$BOGON_LOG_LEVEL" ]   && BOGON_LOG_LEVEL=info

    MARK_IN_FORWARD_CHAIN=$(added_param_value_no MARK_IN_FORWARD_CHAIN $MARK_IN_FORWARD_CHAIN)
    [ -n "$MARK_IN_FORWARD_CHAIN" ] && MARKING_CHAIN=tcfor || MARKING_CHAIN=tcpre
    if [ -n "$TC_ENABLED" ]; then
	CLEAR_TC=$(added_param_value_yes CLEAR_TC $CLEAR_TC)
    else
	CLEAR_TC=
    fi
    
    if [ -n "$LOGFORMAT" ]; then
	if [ -n "$(echo $LOGFORMAT | grep '%d')" ]; then
	    LOGRULENUMBERS=Yes
	    temp=$(printf "$LOGFORMAT" fooxx 1 barxx 2> /dev/null)
	    if [ $? -ne 0 ]; then
		startup_error "Invalid LOGFORMAT string: \"$LOGFORMAT\""
	    fi
	else
	    temp=$(printf "$LOGFORMAT" fooxx barxx 2> /dev/null)
	    if [ $? -ne 0 ]; then
		startup_error "Invalid LOGFORMAT string: \"$LOGFORMAT\""
	    fi
	fi

	[ ${#temp} -le 29 ] || startup_error "LOGFORMAT string is longer than 29 characters: \"$LOGFORMAT\""
    else
	LOGFORMAT="Shorewall:%s:%s:"
    fi
    ADMINISABSENTMINDED=$(added_param_value_no ADMINISABSENTMINDED $ADMINISABSENTMINDED)
    BLACKLISTNEWONLY=$(added_param_value_no BLACKLISTNEWONLY $BLACKLISTNEWONLY)
    DISABLE_IPV6=$(added_param_value_no DISABLE_IPV6 $DISABLE_IPV6)
    BRIDGING=$(added_param_value_no BRIDGING $BRIDGING)
    DYNAMIC_ZONES=$(added_param_value_no DYNAMIC_ZONES $DYNAMIC_ZONES)
    PKTTYPE=$(added_param_value_no PKTTYPE $PKTTYPE)
    STARTUP_ENABLED=$(added_param_value_yes STARTUP_ENABLED $STARTUP_ENABLED)
    RETAIN_ALIASES=$(added_param_value_no RETAIN_ALIASES $RETAIN_ALIASES)
    DELAYBLACKLISTLOAD=$(added_param_value_no DELAYBLACKLISTLOAD $DELAYBLACKLISTLOAD)
    LOGTAGONLY=$(added_param_value_no LOGTAGONLY $LOGTAGONLY)
    DROPINVALID=$(added_param_value_yes DROPINVALID $DROPINVALID)
    RFC1918_STRICT=$(added_param_value_no RFC1918_STRICT $RFC1918_STRICT)
    SAVE_IPSETS=$(added_param_value_no SAVE_IPSETS $SAVE_IPSETS) 
    #
    # Strip the files that we use often
    #
    strip_file interfaces
    strip_file hosts
    #
    # Check out the user's shell
    #
    [ -n "$SHOREWALL_SHELL" ] || SHOREWALL_SHELL=/bin/sh

    temp=$(decodeaddr 192.168.1.1) 
    if [ $(encodeaddr $temp) != 192.168.1.1 ]; then
	startup_error "Shell $SHOREWALL_SHELL is broken and may not be used with Shorewall"
    fi

    rm -f $TMP_DIR/physdev
    rm -f $TMP_DIR/iprange
}

#
# Give Usage Information
#
usage() {
    echo "Usage: $0 [debug] {start|stop|reset|restart|status|refresh|clear|{add|delete} <interface>[:hosts] zone}}"
    exit 1
}

#
# E X E C U T I O N    B E G I N S   H E R E
#
#
# Start trace if first arg is "debug"
#
[ $# -gt 1 ] && [ "$1" = "debug" ] && { set -x ; shift ; }

nolock=

[ $# -gt 1 ] && [ "$1" = "nolock" ] && { nolock=Yes; shift ; }

trap "my_mutex_off; exit 2" 1 2 3 4 5 6 9

COMMAND="$1"

case "$COMMAND" in
    stop)
	[ $# -ne 1 ] && usage
	do_initialize
	my_mutex_on
	#
	# Don't want to do a 'stop' when startup is disabled
	#
	check_disabled_startup 
	echo -n "Stopping Shorewall..."
	stop_firewall
	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
	echo "done."
	my_mutex_off
	;;

    start)
	[ $# -ne 1 ] && usage
	do_initialize
	my_mutex_on
	if qt $IPTABLES -L shorewall -n ; then
	    [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	    echo "Shorewall Already Started"
	    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
	    my_mutex_off
	    exit 0;
	fi
	define_firewall "Start" && [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	my_mutex_off
	;;

    restart)
	[ $# -ne 1 ] && usage
	do_initialize
	my_mutex_on
	if qt $IPTABLES -L shorewall -n ; then
	    define_firewall "Restart"
	else
	    echo "Shorewall Not Currently Running"
	    define_firewall "Start"
	fi

	[ $? -eq 0 ] && [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	my_mutex_off
	;;

    status)
	[ $# -ne 1 ] && usage
	echo "Shorewall-$version Status at $HOSTNAME - $(date)"
	echo
	$IPTABLES -L -n -v
	;;

    reset)
	[ $# -ne 1 ] && usage
	do_initialize
	my_mutex_on
	if ! qt $IPTABLES -L shorewall -n ; then
	    echo "Shorewall Not Started"
	    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
	    my_mutex_off
	    exit 2;
	fi
	$IPTABLES -Z
	$IPTABLES -t nat -Z
	$IPTABLES -t mangle -Z
	report "Shorewall Counters Reset"
	date > $STATEDIR/restarted
	my_mutex_off
	;;

    refresh)
	[ $# -ne 1 ] && usage
	do_initialize
	my_mutex_on
	if ! qt $IPTABLES -L shorewall -n ; then
	    echo "Shorewall Not Started"
	    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
	    my_mutex_off
	    exit 2;
	fi
	refresh_firewall;
	my_mutex_off
	;;

    clear)
	[ $# -ne 1 ] && usage
	do_initialize
	my_mutex_on
	echo -n "Clearing Shorewall..."
	clear_firewall
	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
	echo "done."
	my_mutex_off
	;;

    check)
	[ $# -ne 1 ] && usage
	do_initialize
	check_config
	;;

    add)
	[ $# -lt 3 ] && usage
	do_initialize
	my_mutex_on
	if ! qt $IPTABLES -L shorewall -n ; then
	    echo "Shorewall Not Started"
	    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
	    my_mutex_off
	    exit 2;
	fi
	shift
	add_to_zone $@
	my_mutex_off
	;;

    delete)
	[ $# -lt 3 ] && usage
	do_initialize
	my_mutex_on
	if ! qt $IPTABLES -L shorewall -n ; then
	    echo "Shorewall Not Started"
	    [ -n "$TMP_DIR" ] && rm -rf $TMP_DIR
	    my_mutex_off
	    exit 2;
	fi
	shift
	delete_from_zone $@
	my_mutex_off
	;;

    call)
	#
	# Undocumented way to call functions in /usr/share/shorewall/firewall directly
	#
	shift;
	do_initialize
	EMPTY=
	$@
	;;
    capabilities)
	do_initialize
	report_capabilities
	;;
    *)
	usage
	;;

esac