shorewall_code/Shorewall/Perl/prog.footer

###############################################################################
# Code imported from /usr/share/shorewall/prog.footer
###############################################################################
#
# Clear Proxy Arp
#
delete_proxyarp() {
    if [ -f ${VARDIR}/proxyarp ]; then
	while read address interface external haveroute; do
	    qt arp -i $external -d $address pub
	    [ -z "${haveroute}${NOROUTES}" ] && qt $IP -4 route del $address dev $interface
	    f=/proc/sys/net/ipv4/conf/$interface/proxy_arp
	    [ -f $f ] && echo 0 > $f
	done < ${VARDIR}/proxyarp
    fi

    rm -f ${VARDIR}/proxyarp
}

#
# Remove all Shorewall-added rules
#
clear_firewall() {
    stop_firewall

    setpolicy INPUT ACCEPT
    setpolicy FORWARD ACCEPT
    setpolicy OUTPUT ACCEPT

    run_iptables -F

    echo 1 > /proc/sys/net/ipv4/ip_forward

    if [ -n "$DISABLE_IPV6" ]; then
	if [ -x $IPTABLES ]; then
    	    $IP6TABLES -P INPUT   ACCEPT 2> /dev/null
	    $IP6TABLES -P OUTPUT  ACCEPT 2> /dev/null
	    $IP6TABLES -P FORWARD ACCEPT 2> /dev/null
	fi
    fi

    run_clear_exit

    set_state "Cleared"

    logger -p kern.info "$PRODUCT Cleared"
}

#
# Issue a message and stop/restore the firewall
#
fatal_error()
{
    echo "   ERROR: $@" >&2

    if [ $LOG_VERBOSE -gt 1 ]; then
        timestamp="$(date +'%_b %d %T') "
        echo "${timestamp}  ERROR: $@" >> $STARTUP_LOG
    fi

    stop_firewall
    [ -n "$TEMPFILE" ] && rm -f $TEMPFILE
    exit 2
}

#
# Issue a message and stop
#
startup_error() # $* = Error Message
{
    echo "   ERROR: $@: Firewall state not changed" >&2
    case $COMMAND in
        start)
	    logger -p kern.err "ERROR:$PRODUCT start failed:Firewall state not changed"
	    ;;
	restart)
	    logger -p kern.err "ERROR:$PRODUCT restart failed:Firewall state not changed"
	    ;;
	restore)
	    logger -p kern.err "ERROR:$PRODUCT restore failed:Firewall state not changed"
	    ;;
    esac

    if [ $LOG_VERBOSE -gt 1 ]; then
        timestamp="$(date +'%_b %d %T') "

	case $COMMAND in
	    start)
		echo "${timestamp}  ERROR:$PRODUCT start failed:Firewall state not changed" >> $STARTUP_LOG
		;;
	    restart)
		echo "${timestamp}  ERROR:$PRODUCT restart failed:Firewall state not changed" >> $STARTUP_LOG
		;;
	    restore)
		echo "${timestamp}  ERROR:$PRODUCT restore failed:Firewall state not changed" >> $STARTUP_LOG
		;;
	esac
    fi

    kill $$
    exit 2
}

#
# Run iptables and if an error occurs, stop/restore the firewall
#
run_iptables()
{
    local status

    while [ 1 ]; do
	$IPTABLES $@
	status=$?
	[ $status -ne 4 ] && break
    done

    if [ $status -ne 0 ]; then
        error_message "ERROR: Command \"$IPTABLES $@\" Failed"
	stop_firewall
        exit 2
    fi
}

#
# Run iptables retrying exit status 4
#
do_iptables()
{
    local status

    while [ 1 ]; do
	$IPTABLES $@
	status=$?
	[ $status -ne 4 ] && return $status;
    done
}

#
# Run iptables and if an error occurs, stop/restore the firewall
#
run_ip()
{
    if ! $IP -4 $@; then
	error_message "ERROR: Command \"$IP -4 $@\" Failed"
	stop_firewall
	exit 2
    fi
}

#
# Run tc and if an error occurs, stop/restore the firewall
#
run_tc() {
    if ! $TC $@ ; then
	error_message "ERROR: Command \"$TC $@\" Failed"
	stop_firewall
	exit 2
    fi
}

#
# Restore the rules generated by 'drop','reject','logdrop', etc.
#
restore_dynamic_rules() {
    if [ -f ${VARDIR}/save ]; then
	progress_message2 "Setting up dynamic rules..."
	rangematch='source IP range'
	while read target ignore1 ignore2 address ignore3 rest; do
	    case $target in
		DROP|reject|logdrop|logreject)
		    case $rest in
			$rangematch*)
			    run_iptables -A dynamic -m iprange --src-range ${rest#source IP range} -j $target
			    ;;
			*)
			    if [ -z "$rest" ]; then
				run_iptables -A dynamic -s $address -j $target
			    else
				error_message "WARNING: Unable to restore dynamic rule \"$target $ignore1 $ignore2 $address $ignore3 $rest\""
			    fi
			    ;;
		    esac
		    ;;
	    esac
	done < ${VARDIR}/save
    fi
}

#
# Get a list of all configured broadcast addresses on the system
#
get_all_bcasts()
{
    $IP -f inet addr show 2> /dev/null | grep 'inet.*brd' | grep -v '/32 ' | sed 's/inet.*brd //; s/scope.*//;' | sort -u
}

#
# Run the .iptables_restore_input as a set of discrete iptables commands
#
debug_restore_input() {
    local first second rest table chain
    #
    # Clear the ruleset 
    #
    qt1 $IPTABLES -t mangle -F
    qt1 $IPTABLES -t mangle -X

    for chain in PREROUTING INPUT FORWARD POSTROUTING; do
	qt1 $IPTABLES -t mangle -P $chain ACCEPT
    done

    qt1 $IPTABLES -t raw    -F
    qt1 $IPTABLES -t raw    -X

    for chain in PREROUTING OUTPUT; do
	qt1 $IPTABLES -t raw -P $chain ACCEPT
    done

    run_iptables -t nat -F
    run_iptables -t nat -X

    for chain in PREROUTING POSTROUTING OUTPUT; do
	qt1 $IPTABLES -t nat -P $chain ACCEPT
    done

    qt1 $IPTABLES -t filter -F
    qt1 $IPTABLES -t filter -X

    for chain in INPUT FORWARD OUTPUT; do
	qt1 $IPTABLES -t filter -P $chain -P ACCEPT
    done

    while read first second rest; do
	case $first in
	    -*)
		#
		# We can't call run_iptables() here because the rules may contain quoted strings
		#
		eval $IPTABLES -t $table $first $second $rest

		if [ $? -ne 0 ]; then
		    error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
		    stop_firewall
		    exit 2
		fi
		;;
	    :*)
		chain=${first#:}

		if [ "x$second" = x- ]; then
		    do_iptables -t $table -N $chain
		else
		    do_iptables -t $table -P $chain $second
		fi

		if [ $? -ne 0 ]; then
		    error_message "ERROR: Command \"$IPTABLES $first $second $rest\" Failed"
		    stop_firewall
		    exit 2
		fi
		;;
	    #
	    # This grotesque hack with the table names works around a bug/feature with ash
	    #
	    '*'raw)
		table=raw
		;;
	    '*'mangle)
		table=mangle
		;;
	    '*'nat)
		table=nat
		;;
	    '*'filter)
		table=filter
		;;
	esac
    done
}

#
# Give Usage Information
#
usage() {
    echo "Usage: $0 [ -q ] [ -v ] [ -n ] [ start|stop|clear|reset|refresh|restart|status|version ]"
    exit $1
}
################################################################################
# E X E C U T I O N    B E G I N S   H E R E				       #
################################################################################
#
# Start trace if first arg is "debug" or "trace"
#
if [ $# -gt 1 ]; then 
    if [ "x$1" = "xtrace" ]; then
	set -x
	shift
    elif [ "x$1" = "xdebug" ]; then
	DEBUG=Yes
	shift
    fi
fi

initialize

if [ -n "$STARTUP_LOG" ]; then
    if [ ${SHOREWALL_INIT_SCRIPT:-0} -eq 1 ]; then
	#
	# We're being run by a startup script that isn't redirecting STDOUT
	# Redirect it to the log
	#
	exec 2>>$STARTUP_LOG
    fi
fi

finished=0

while [ $finished -eq 0 -a $# -gt 0 ]; do
    option=$1
    case $option in
	-*)
	    option=${option#-}

	    [ -z "$option" ] && usage 1

	    while [ -n "$option" ]; do
		case $option in
		    v*)
			VERBOSE=$(($VERBOSE + 1 ))
			option=${option#v}
			;;
		    q*)
			VERBOSE=$(($VERBOSE - 1 ))
			option=${option#q}
			;;
		    n*)
			NOROUTES=Yes
			option=${option#n}
			;;
		    *)
			usage 1
			;;
		esac
	    done
	    shift
	    ;;
	*)
	    finished=1
            ;;
    esac
done

COMMAND="$1"

[ -n "${PRODUCT:=Shorewall}" ]

case "$COMMAND" in
    start)
	[ $# -ne 1 ] && usage 2
	if shorewall_is_started; then
	    error_message "$PRODUCT is already Running"
	    status=0
	else
	    progress_message3 "Starting $PRODUCT...."
	    define_firewall
	    status=$?
	    [ -n "$SUBSYSLOCK" -a $status -eq 0 ] && touch $SUBSYSLOCK
	    progress_message3 "done."
	fi
	;;
    stop)
	[ $# -ne 1 ] && usage 2
	progress_message3 "Stopping $PRODUCT...."
	stop_firewall
	status=0
	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
	progress_message3 "done."
	;;
    reset)
	if ! shorewall_is_started ; then
	    error_message "$PRODUCT is not running"
	    status=2
	elif [ $# -eq 1 ]; then
	    $IPTABLES -Z
	    $IPTABLES -t nat -Z
	    $IPTABLES -t mangle -Z
	    date > ${VARDIR}/restarted
	    status=0
	    progress_message3 "$PRODUCT Counters Reset"
	else
	    shift
	    status=0
	    for chain in $@; do
		if chain_exists $chain; then
		    if qt $IPTABLES -Z $chain; then
			progress_message3 "Filter $chain Counters Reset"
		    else
			error_message "ERROR: Reset of chain $chain failed"
			status=2
			break
		    fi
		else
		    error_message "WARNING: Filter Chain $chain does not exist"
		fi
	    done
	fi
	;;
    restart)
	[ $# -ne 1 ] && usage 2
	if shorewall_is_started; then
	    progress_message3 "Restarting $PRODUCT...."
	else
	    error_message "$PRODUCT is not running"
	    progress_message3 "Starting $PRODUCT...."
	fi

	define_firewall
	status=$?
	if [ -n "$SUBSYSLOCK" ]; then
 	    [ $status -eq 0 ] && touch $SUBSYSLOCK || rm -f $SUBSYSLOCK
        fi
	progress_message3 "done."
	;;
    refresh)
	[ $# -ne 1 ] && usage 2
	if shorewall_is_started; then
	    progress_message3 "Refreshing $PRODUCT...."
	    define_firewall
	    status=$?
	    progress_message3 "done."
	else
	    echo "$PRODUCT is not running" >&2
	    status=2
	fi
	;;
    restore)
	[ $# -ne 1 ] && usage 2
	define_firewall
	status=$?
	if [ -n "$SUBSYSLOCK" ]; then
 	    [ $status -eq 0 ] && touch $SUBSYSLOCK || rm -f $SUBSYSLOCK
        fi
	;;
    clear)
	[ $# -ne 1 ] && usage 2
	progress_message3 "Clearing $PRODUCT...."
	clear_firewall
	status=0
	[ -n "$SUBSYSLOCK" ] && rm -f $SUBSYSLOCK
	progress_message3 "done."
	;;
    status)
	[ $# -ne 1 ] && usage 2
	echo "$PRODUCT-$VERSION Status at $HOSTNAME - $(date)"
	echo
	if shorewall_is_started; then
	    echo "$PRODUCT is running"
	    status=0
	else
	    echo "$PRODUCT is stopped"
	    status=4
	fi

	if [ -f ${VARDIR}/state ]; then
	    state="$(cat ${VARDIR}/state)"
	    case $state in
		Stopped*|Clear*)
		    status=3
		    ;;
	    esac
	else
	    state=Unknown
	fi
	echo "State:$state"
	echo
	;;
    version)
	[ $# -ne 1 ] && usage 2
	echo $VERSION
	status=0
	;;
    help)
	[ $# -ne 1 ] && usage 2
	usage 0
	;;
    *)
	usage 2
	;;
esac

exit $status