shorewall_code/Shorewall-docs2/shorewall_quickstart_guide.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article id="IPIP">
  <!--$Id$-->

  <articleinfo>
    <title>Shorewall QuickStart Guides (HOWTOs)</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate>2004-10-22</pubdate>

    <copyright>
      <year>2001-2004</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <para>With thanks to Richard who reminded me once again that we must all
  first walk before we can run.</para>

  <para>The French Translations of the single-IP guides are courtesy of
  Patrice Vetsel. Updated for Shorewall 2.0 by Fabien Demassieux.</para>

  <para>The French Translation of the Shorewall Setup Guide is courtesy of
  Fabien Demassieux.</para>

  <section id="Guides">
    <title>The Guides</title>

    <para>These guides provide step-by-step instructions for configuring
    Shorewall in common firewall setups.</para>

    <section>
      <title>If you already have a router.</title>

      <para>If you already have a router on your premises and you simply want
      to add a firewall between the router and your local system then you want
      a <ulink url="bridge.html">bridge configuration</ulink>.</para>
    </section>

    <section>
      <title>If you want the firewall system to handle a <emphasis
      role="bold">single public IP address</emphasis></title>

      <para>These guides are designed to get your first firewall up and
      running quickly in the three most common Shorewall configurations. If
      you want to learn more about Shorewall than is explained in these simple
      guides then the <ulink url="shorewall_setup_guide.htm">Shorewall Setup
      Guide</ulink> is for you.<itemizedlist>
          <listitem>
            <para><ulink url="standalone.htm">Standalone</ulink> Linux System
            (<ulink url="standalone_fr.html">Version Française</ulink>)</para>
          </listitem>

          <listitem>
            <para><ulink url="two-interface.htm">Two-interface</ulink> Linux
            System acting as a firewall/router for a small local network
            (<ulink url="two-interface_fr.html">Version
            Française</ulink>)</para>
          </listitem>

          <listitem>
            <para><ulink url="three-interface.htm">Three-interface</ulink>
            Linux System acting as a firewall/router for a small local network
            and a DMZ.. (<ulink url="three-interface_fr.html">Version
            Française</ulink>)</para>
          </listitem>
        </itemizedlist></para>
    </section>

    <section>
      <title>If you want the firewall system to handle more than one public IP
      address</title>

      <para>The <ulink url="shorewall_setup_guide.htm">Shorewall Setup
      Guide</ulink> outlines the steps necessary to set up a firewall where
      there are multiple public IP addresses involved or if you want to learn
      more about Shorewall than is explained in the single-address guides
      above (<ulink url="shorewall_setup_guide_fr.htm">Version
      Française</ulink>)</para>
    </section>

    <section>
      <title>Guides that Others have Written</title>

      <para>Andrew Allen has provided <ulink
      url="http://unofficial-support.com/node/view/46">this guide</ulink> for
      installing Shorewall on standalone webhosting servers.</para>
    </section>
  </section>
</article>