shorewall_code/docs/Universal.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Universal Configuration</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate><?dbtimestamp format="Y/m/d"?></pubdate>

    <copyright>
      <year>2010</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <section>
    <title>Configuring Shorewall</title>

    <para>Once you have installed the Shorewall software, you must configure
    it. The easiest way to do that is to use one of Shorewall's
    <firstterm>Sample Configurations</firstterm>. The Universal Configuration
    is one of those samples.</para>
  </section>

  <section>
    <title>What the Universal Configuration does</title>

    <para>The Universal Shorewall configuration requires that you simply copy
    the configuration to <filename class="directory">/etc/shorewall</filename>
    and start Shorewall. This sample configuation:</para>

    <itemizedlist>
      <listitem>
        <para>Allows all outgoing traffic.</para>
      </listitem>

      <listitem>
        <para>Blocks all incoming connections except:</para>

        <itemizedlist>
          <listitem>
            <para>Secure Shell</para>
          </listitem>

          <listitem>
            <para>Ping</para>
          </listitem>
        </itemizedlist>
      </listitem>

      <listitem>
        <para>Allows forwarding of traffic, provided that the system has more
        than one interface or is set up to route between networks on a single
        interface.</para>
      </listitem>
    </itemizedlist>
  </section>

  <section>
    <title>How to Install it</title>

    <para>The location of the sample configuration files is dependent on your
    distribution and <ulink url="Install.htm">how you installed
    Shorewall</ulink>.</para>

    <orderedlist>
      <listitem>
        <para>If you installed using an <acronym>RPM</acronym>, the samples
        will be in the <filename
        class="directory">Samples/Universal</filename> subdirectory of the
        Shorewall documentation directory. If you don't know where the
        Shorewall documentation directory is, you can find the samples using
        this command:</para>

        <programlisting>~# rpm -ql shorewall-common | fgrep Universal
/usr/share/doc/packages/shorewall/Samples/Universal
/usr/share/doc/packages/shorewall/Samples/Universal/interfaces
/usr/share/doc/packages/shorewall/Samples/Universal/policy
/usr/share/doc/packages/shorewall/Samples/Universal/rules
/usr/share/doc/packages/shorewall/Samples/Universal/zones
~#</programlisting>
      </listitem>

      <listitem>
        <para>If you installed using the tarball, the samples are in the
        <filename class="directory">Samples/Universal</filename> directory in
        the tarball.</para>
      </listitem>

      <listitem>
        <para>If you installed using a Shorewall 4.x .deb, the samples are in
        <filename
        class="directory">/usr/share/doc/shorewall-common/examples/Universal</filename>..
        You do not need the shorewall-doc package to have access to the
        samples.</para>
      </listitem>
    </orderedlist>

    <para>Simple copy the files from the Universal directory to
    /etc/shorewall.</para>
  </section>

  <section>
    <title>How to Start the firewall</title>

    <para>Before starting Shorewall for the first time, it's a good idea to
    stop your existing firewall. On Redhat/CentOS/Fedora, at a root prompt
    type:</para>

    <blockquote>
      <para><command>service iptables stop</command></para>
    </blockquote>

    <para>If you are running SuSE, use Yast or Yast2 to stop
    SuSEFirewall.</para>

    <para>Once you have Shorewall running to your satisfaction, you should
    totally disable your existing firewall. On /Redhat/CentOS/Fedora:</para>

    <blockquote>
      <para><command>chkconfig --del iptables</command></para>
    </blockquote>

    <para>At a root prompt, type:</para>

    <blockquote>
      <para><command>/sbin/shorewall start</command></para>
    </blockquote>

    <para>That's it. Shorewall will automatically start again when you
    reboot.</para>
  </section>

  <section>
    <title>Now that it is running, ...</title>

    <section>
      <title>How do I stop the firewall?</title>

      <para>At a root prompt, type:</para>

      <blockquote>
        <para><command>/sbin/shorewall clear</command></para>
      </blockquote>

      <para>The system is now 'wide open'.</para>
    </section>

    <section>
      <title>How do I prevent it from responding to ping?</title>

      <para>Edit <filename>/etc/shorewall/rules</filename> and remove the line
      that reads:</para>

      <blockquote>
        <para>Ping(ACCEPT) net $FW</para>
      </blockquote>

      <para>and at a root prompt, type:</para>

      <blockquote>
        <para><command>/sbin/shorewall restart</command></para>
      </blockquote>
    </section>

    <section>
      <title>How do I allow other kinds of incoming connections?</title>

      <para>Shorewall includes a collection of <firstterm>macros</firstterm>
      that can be used to quickly allow or deny services. You can find a list
      of the macros included in your version of Shorewall using the command
      <command>ls <filename>/usr/share/shorewall/macro.*</filename></command>
      or at a shell prompt type:</para>

      <blockquote>
        <para><command>/sbin/shorewall show macros</command></para>
      </blockquote>

      <para>If you wish to enable connections from the Internet to your
      firewall and you find an appropriate macro in
      <filename>/etc/shorewall/macro.*</filename>, the general format of a
      rule in <filename>/etc/shorewall/rules</filename> is:</para>

      <programlisting>#ACTION         SOURCE    DESTINATION     PROTO       DPORT
&lt;<emphasis>macro</emphasis>&gt;(ACCEPT) net       $FW</programlisting>

      <important>
        <para>Be sure to add your rules after the line that reads <emphasis
        role="bold">SECTION NEW.</emphasis></para>
      </important>

      <example id="Example1">
        <title>You want to run a Web Server and a IMAP Server on your firewall
        system:</title>

        <programlisting>#ACTION     SOURCE    DESTINATION     PROTO       DPORT
Web(ACCEPT) net       $FW
IMAP(ACCEPT)net       $FW</programlisting>
      </example>

      <para>You may also choose to code your rules directly without using the
      pre-defined macros. This will be necessary in the event that there is
      not a pre-defined macro that meets your requirements. In that case the
      general format of a rule in <filename>/etc/shorewall/rules</filename>
      is:</para>

      <programlisting>#ACTION   SOURCE    DESTINATION     PROTO       DPORT
ACCEPT    net       $FW             <emphasis>&lt;protocol&gt;</emphasis>  <emphasis>&lt;port&gt;</emphasis></programlisting>

      <example id="Example2">
        <title>You want to run a Web Server and a IMAP Server on your firewall
        system:</title>

        <para><programlisting>#ACTION   SOURCE    DESTINATION     PROTO       DPORT
ACCEPT    net       $FW             tcp          80
ACCEPT    net       $FW             tcp          143</programlisting></para>
      </example>

      <para>If you don't know what port and protocol a particular application
      uses, see <ulink url="ports.htm">here</ulink>.</para>
    </section>

    <section>
      <title>How do I make the firewall log a message when it disallows an
      incoming connection?</title>

      <para>Shorewall does not maintain a log itself but rather relies on your
      <ulink url="shorewall_logging.html">system's logging
      configuration</ulink>. The following <ulink
      url="manpages/shorewall.html">commands</ulink> rely on knowing where
      Netfilter messages are logged:</para>

      <itemizedlist>
        <listitem>
          <para><command>shorewall show log</command> (Displays the last 20
          Netfilter log messages)</para>
        </listitem>

        <listitem>
          <para><command>shorewall logwatch</command> (Polls the log at a
          settable interval</para>
        </listitem>

        <listitem>
          <para><command>shorewall dump</command> (Produces an extensive
          report for inclusion in Shorewall problem reports)</para>
        </listitem>
      </itemizedlist>

      <para>It is important that these commands work properly because when you
      encounter connection problems when Shorewall is running, the first thing
      that you should do is to look at the Netfilter log; with the help of
      <ulink url="FAQ.htm#faq17">Shorewall FAQ 17</ulink>, you can usually
      resolve the problem quickly.</para>

      <para>The Netfilter log location is distribution-dependent:</para>

      <itemizedlist>
        <listitem>
          <para>Debian and its derivatives log Netfilter messages to
          <filename>/var/log/kern.log</filename>.</para>
        </listitem>

        <listitem>
          <para>Recent <trademark>SuSE/OpenSuSE</trademark> releases come
          preconfigured with syslog-ng and log netfilter messages to
          <filename>/var/log/firewall</filename>.</para>
        </listitem>

        <listitem>
          <para>For other distributions, Netfilter messages are most commonly
          logged to <filename>/var/log/messages</filename>.</para>
        </listitem>
      </itemizedlist>

      <para>Modify the LOGFILE setting in
      <filename>/etc/shorewall/shorewall.conf</filename> to specify the name
      of your log.</para>

      <important>
        <para>The LOGFILE setting does not control where the Netfilter log is
        maintained -- it simply tells the /sbin/<filename>shorewall</filename>
        utility where to find the log.</para>
      </important>

      <para>Now, edit <filename>/etc/shorewall/policy</filename> and modify
      the line that reads:</para>

      <blockquote>
        <para>net all DROP</para>
      </blockquote>

      <para>to</para>

      <blockquote>
        <para>net all DROP <emphasis role="bold">info</emphasis></para>
      </blockquote>

      <para>Then at a root prompt, type:</para>

      <blockquote>
        <para><command>/sbin/shorewall reload</command></para>
      </blockquote>
    </section>

    <section>
      <title>How do I prevent the firewall from forwarding connection
      requests?</title>

      <para>Edit /etc/shorewall/interfaces, and remove the routeback option
      from the interface. e.g., change the line that reads:</para>

      <blockquote>
        <para>net all - dhcp,physical=+<emphasis
        role="bold">,routeback</emphasis>,optional</para>
      </blockquote>

      <para>to</para>

      <blockquote>
        <para>net all - dhcp,physical=+,optional</para>
      </blockquote>

      <para>Then at a root prompt, type:</para>

      <blockquote>
        <para><command>/sbin/shorewall reload</command></para>
      </blockquote>
    </section>
  </section>
</article>