shorewall_code/Shorewall-docs2/Install.xml

371 lines
13 KiB
XML
Raw Normal View History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article id="Install">
<!--$Id$-->
<articleinfo>
<title>Shorewall Installation and Upgrade</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate>2003-04-08</pubdate>
<copyright>
<year>2001</year>
<year>2002</year>
<year>2003</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
</legalnotice>
</articleinfo>
<important>
<para>Before upgrading, be sure to review the <ulink
url="upgrade_issues.htm">Upgrade Issues</ulink>.</para>
</important>
<important>
<para>Before attempting installation, I strongly urge you to read and
print a copy of the <ulink url="shorewall_quickstart_guide.htm">Shorewall
QuickStart</ulink> Guide for the configuration that most closely matches
your own.</para>
</important>
<section id="Install_RPM">
<title>Install using RPM</title>
<para>To install Shorewall using the RPM:</para>
<warning>
<para>If you have RedHat 7.2 and are running iptables version 1.2.3 (at
a shell prompt, type <quote>/sbin/iptables --version</quote>), you must
upgrade to version 1.2.4 either from the <ulink
url="http://www.redhat.com/support/errata/RHSA-2001-144.html">RedHat
update site</ulink> or from the <ulink url="errata.htm">Shorewall Errata
page</ulink> before attempting to start Shorewall.</para>
</warning>
<orderedlist>
<listitem>
<para>Install the RPM</para>
<programlisting>rpm -ivh &#60;shorewall rpm&#62;</programlisting>
<note>
<para>Some SuSE users have encountered a problem whereby rpm reports
a conflict with kernel &#60;= 2.2 even though a 2.4 kernel is
installed. If this happens, simply use the --nodeps option to rpm.</para>
<programlisting>rpm -ivh --nodeps &#60;shorewall rpm&#62;</programlisting>
</note>
<note>
<para>Beginning with Shorewall 1.4.0, Shorewall is dependent on the
iproute package. Unfortunately, some distributions call this package
iproute2 which will cause the installation of Shorewall to fail with
the diagnostic:</para>
<programlisting>error: failed dependencies:iproute is needed by shorewall-1.4.x-1</programlisting>
<para>This may be worked around by using the --nodeps option of rpm.</para>
<programlisting>rpm -ivh --nodeps &#60;shorewall rpm&#62;</programlisting>
</note>
</listitem>
<listitem>
<para>Edit the <link linkend="Config_Files">configuration files</link>
to match your configuration.</para>
<warning>
<para>YOU CAN <emphasis role="bold">NOT</emphasis> SIMPLY INSTALL
THE RPM AND ISSUE A <quote>shorewall start</quote> COMMAND. SOME
CONFIGURATION IS REQUIRED BEFORE THE FIREWALL WILL START. IF YOU
ISSUE A <quote>start</quote> COMMAND AND THE FIREWALL FAILS TO
START, YOUR SYSTEM WILL NO LONGER ACCEPT ANY NETWORK TRAFFIC. IF
THIS HAPPENS, ISSUE A <quote>shorewall clear</quote> COMMAND TO
RESTORE NETWORK CONNECTIVITY.</para>
</warning>
</listitem>
<listitem>
<para>Start the firewall by typing</para>
<programlisting>shorewall start</programlisting>
</listitem>
</orderedlist>
</section>
<section id="Install_Tarball">
<title>Install using tarball</title>
<para>To install Shorewall using the tarball and install script:</para>
<orderedlist>
<listitem>
<para>unpack the tarball (tar -zxf shorewall-x.y.z.tgz).</para>
</listitem>
<listitem>
<para>cd to the shorewall directory (the version is encoded in the
directory name as in <quote>shorewall-1.1.10</quote>).</para>
</listitem>
<listitem>
<para>If you are using <ulink
url="http://www.caldera.com/openstore/openlinux/">Caldera</ulink>,
<ulink url="http://www.redhat.com">RedHat</ulink>, <ulink
url="http://www.linux-mandrake.com">Mandrake</ulink>, <ulink
url="http://www.corel.com">Corel</ulink>, <ulink
url="http://www.slackware.com/">Slackware</ulink> or <ulink
url="http://www.debian.org">Debian</ulink> then type</para>
<programlisting>./install.sh</programlisting>
<orderedlist numeration="loweralpha">
<listitem>
<para>If you are using <ulink url="http://www.suse.com">SuSe</ulink>
then type</para>
<programlisting>./install.sh /etc/init.d</programlisting>
</listitem>
<listitem>
<para>If your distribution has directory /etc/rc.d/init.d or
/etc/init.d then type</para>
<programlisting>./install.sh</programlisting>
</listitem>
<listitem>
<para>For other distributions, determine where your distribution
installs init scripts and type</para>
<programlisting>./install.sh &#60;init script directory&#62;</programlisting>
</listitem>
</orderedlist>
</listitem>
<listitem>
<para>Edit the <link linkend="Config_Files">configuration files</link>
to match your configuration.</para>
</listitem>
<listitem>
<para>Start the firewall by typing</para>
<programlisting>shorewall start</programlisting>
</listitem>
<listitem>
<para>If the install script was unable to configure Shorewall to be
started automatically at boot, see <ulink
url="starting_and_stopping_shorewall.htm">these instructions</ulink>.</para>
</listitem>
</orderedlist>
</section>
<section id="LRP">
<title>Install the .lrp</title>
<para>To install my version of Shorewall on a fresh Bering disk, simply
replace the <quote>shorwall.lrp</quote> file on the image with the file
that you downloaded. See the <ulink url="two-interface.htm">two-interface
QuickStart Guide</ulink> for information about further steps required.</para>
</section>
<section id="Upgrade_RPM">
<title>Upgrade using RPM</title>
<para>If you already have the Shorewall RPM installed and are upgrading to
a new version:</para>
<important>
<para>If you are upgrading from a 1.2 version of Shorewall to a 1.4
version or and you have entries in the /etc/shorewall/hosts file then
please check your /etc/shorewall/interfaces file to be sure that it
contains an entry for each interface mentioned in the hosts file. Also,
there are certain 1.2 rule forms that are no longer supported under 1.4
(you must use the new 1.4 syntax). See <ulink url="errata.htm#Upgrade">the
upgrade issues</ulink> for details.</para>
</important>
<orderedlist>
<listitem>
<para>Upgrade the RPM</para>
<programlisting>rpm -Uvh &#60;shorewall rpm file&#62;</programlisting>
<note>
<para>If you are installing version 1.2.0 and have one of the 1.2.0
Beta RPMs installed, you must use the <quote>--oldpackage</quote>
option to rpm.</para>
<informalexample>
<programlisting>rpm -Uvh --oldpackage shorewall-1.2-0.noarch.rpm</programlisting>
</informalexample>
</note>
<note>
<para>Some SuSE users have encountered a problem whereby rpm reports
a conflict with kernel &#60;= 2.2 even though a 2.4 kernel is
installed. If this happens, simply use the --nodeps option to rpm.</para>
<programlisting>rpm -Uvh --nodeps &#60;shorewall rpm&#62;</programlisting>
</note>
<note>
<para>Beginning with Shorewall 1.4.0, Shorewall is dependent on the
iproute package. Unfortunately, some distributions call this package
iproute2 which will cause the upgrade of Shorewall to fail with the
diagnostic:</para>
<programlisting>error: failed dependencies:iproute is needed by shorewall-1.4.0-1</programlisting>
<para>This may be worked around by using the --nodeps option of rpm.</para>
<programlisting>rpm -Uvh --nodeps &#60;shorewall rpm&#62;</programlisting>
</note>
</listitem>
<listitem>
<para>See if there are any incompatibilities between your
configuration and the new Shorewall version and correct as necessary.</para>
<programlisting>shorewall check</programlisting>
</listitem>
<listitem>
<para>Restart the firewall.</para>
<programlisting>shorewall restart</programlisting>
</listitem>
</orderedlist>
</section>
<section id="Upgrade_Tarball">
<title>Upgrade using tarball</title>
<para>If you already have Shorewall installed and are upgrading to a new
version using the tarball:</para>
<important>
<para>If you are upgrading from a 1.2 version of Shorewall to a 1.4
version and you have entries in the /etc/shorewall/hosts file then
please check your /etc/shorewall/interfaces file to be sure that it
contains an entry for each interface mentioned in the hosts file. Also,
there are certain 1.2 rule forms that are no longer supported under 1.4
(you must use the new 1.4 syntax). See <ulink url="errata.htm#Upgrade">the
upgrade issues</ulink> for details.</para>
</important>
<orderedlist>
<listitem>
<para>unpack the tarball.</para>
<programlisting>tar -zxf shorewall-x.y.z.tgz</programlisting>
</listitem>
<listitem>
<para>cd to the shorewall directory (the version is encoded in the
directory name as in <quote>shorewall-3.0.1</quote>).</para>
</listitem>
<listitem>
<para>If you are using <ulink
url="http://www.caldera.com/openstore/openlinux/">Caldera</ulink>,
<ulink url="http://www.redhat.com">RedHat</ulink>, <ulink
url="http://www.linux-mandrake.com">Mandrake</ulink>, <ulink
url="http://www.corel.com">Corel</ulink>, <ulink
url="http://www.slackware.com/">Slackware</ulink> or <ulink
url="http://www.debian.org">Debian</ulink> then type</para>
<programlisting>./install.sh</programlisting>
<orderedlist numeration="loweralpha">
<listitem>
<para>If you are using <ulink url="http://www.suse.com">SuSe</ulink>
then type</para>
<programlisting>./install.sh /etc/init.d</programlisting>
</listitem>
<listitem>
<para>If your distribution has directory /etc/rc.d/init.d or
/etc/init.d then type</para>
<programlisting>./install.sh</programlisting>
</listitem>
<listitem>
<para>For other distributions, determine where your distribution
installs init scripts and type</para>
<programlisting>./install.sh &#60;init script directory&#62;</programlisting>
</listitem>
</orderedlist>
</listitem>
<listitem>
<para>See if there are any incompatibilities between your
configuration and the new Shorewall version and correct as necessary.</para>
<programlisting>shorewall check</programlisting>
</listitem>
<listitem>
<para>Start the firewall by typing</para>
<programlisting>shorewall start</programlisting>
</listitem>
<listitem>
<para>If the install script was unable to configure Shorewall to be
started automatically at boot, see <ulink
url="starting_and_stopping_shorewall.htm">these instructions</ulink>.</para>
</listitem>
</orderedlist>
</section>
<section id="LRP_Upgrade">
<title>Upgrade the .lrp</title>
<para>If you already have a running Bering installation and wish to
upgrade to a later version of Shorewall:</para>
<remark>UNDER CONSTRUCTION...</remark>
</section>
<section id="Config_Files">
<title>Configuring Shorewall</title>
<para>You will need to edit some or all of the configuration files to
match your setup. In most cases, the <ulink
url="shorewall_quickstart_guide.htm">Shorewall QuickStart Guides</ulink>
contain all of the information you need.</para>
</section>
<section>
<title>Uninstall/Fallback</title>
<para>See <quote><ulink url="fallback.htm">Fallback and Uninstall</ulink></quote>.</para>
</section>
</article>