shorewall_code/Shorewall/shorewall

#!/bin/sh
#
#     Shorewall Packet Filtering Firewall Control Program - V3.2
#
#     This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
#     (c) 1999,2000,2001,2002,2003,2004,2005,2006 - Tom Eastep (teastep@shorewall.net)
#
#	This file should be placed in /sbin/shorewall.
#
#	Shorewall documentation is available at http://shorewall.sourceforge.net
#
#	This program is free software; you can redistribute it and/or modify
#	it under the terms of Version 2 of the GNU General Public License
#	as published by the Free Software Foundation.
#
#	This program is distributed in the hope that it will be useful,
#	but WITHOUT ANY WARRANTY; without even the implied warranty of
#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#	GNU General Public License for more details.
#
#	You should have received a copy of the GNU General Public License
#	along with this program; if not, write to the Free Software
#	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
#	If an error occurs while starting or restarting the firewall, the
#	firewall is automatically stopped.
#
#	The firewall uses configuration files in /etc/shorewall/ - skeleton
#	files is included with the firewall.
#
#	Commands are:
#
#          shorewall add <iface>[:<host>] zone     Adds a host or subnet to a zone
#          shorewall delete <iface>[:<host>] zone  Deletes a host or subnet from a zone
#          shorewall dump                          Dumps all Shorewall-related information
#                                                  for problem analysis
#	   shorewall start 			   Starts the firewall
#	   shorewall restart			   Restarts the firewall
#	   shorewall stop			   Stops the firewall
#	   shorewall status			   Displays firewall status
#	   shorewall reset			   Resets iptables packet and
#						   byte counts
#	   shorewall clear			   Open the floodgates by
#						   removing all iptables rules
#						   and setting the three permanent
#						   chain policies to ACCEPT
#	   shorewall refresh			   Rebuild the common chain to
#						   compensate for a change of
#						   broadcast address on any "detect"
#						   interface.
#	   shorewall show <chain> [ <chain> ... ]  Display the rules in each <chain> listed
#          shorewall show actions                  Displays the available actions
#	   shorewall show log			   Print the last 20 log messages
#	   shorewall show connections		   Show the kernel's connection
#						   tracking table
#	   shorewall show nat			   Display the rules in the nat table
#	   shorewall show {mangle|tos}		   Display the rules in the mangle table
#	   shorewall show tc			   Display traffic control info
#	   shorewall show classifiers		   Display classifiers
#          shorewall show capabilities             Display iptables/kernel capabilities
#	   shorewall version			   Display the installed version id
#	   shorewall check			   Verify the more heavily-used
#						   configuration files.
#	   shorewall try <directory> [ <timeout> ] Try a new configuration and if
#						   it doesn't work, revert to the
#						   standard one. If a timeout is supplied
#						   the command reverts back to the
#						   standard configuration after that many
#						   seconds have elapsed after successfully
#						   starting the new configuration.
#	   shorewall logwatch [ refresh-interval ] Monitor the local log for Shorewall
#						   messages.
#	   shorewall drop <address> ...		   Temporarily drop all packets from the
#						   listed address(es)
#	   shorewall reject <address> ...	   Temporarily reject all packets from the
#						   listed address(es)
#	   shorewall allow <address> ...	   Reenable address(es) previously
#						   disabled with "drop" or "reject"
#	   shorewall save [ <file> ]		   Save the list of "rejected" and
#						   "dropped" addresses so that it will
#						   be automatically reinstated the
#						   next time that Shorewall starts.
#                                                  Save the current state so that 'shorewall
#                                                  restore' can be used.
#
#          shorewall forget [ <file> ]             Discard the data saved by 'shorewall save'
#
#          shorewall restore [ <file> ]            Restore the state of the firewall from
#                                                  previously saved information.
#
#          shorewall ipaddr { <address>/<cidr> | <address> <netmask> }
#
#                                                  Displays information about the network
#                                                  defined by the argument[s]
#
#          shorewall iprange <address>-<address>   Decomposes a range of IP addresses into
#                                                  a list of network/host addresses.
#
#          shorewall ipdecimal { <address> | <integer> }
#
#                                                  Displays the decimal equivalent of an IP
#                                                  address and vice versa.
#
#          shorewall safe-start                    Starts the firewall and promtp for a c
#                                                  confirmation to accept or reject the new
#                                                  configuration
#
#          shorewall safe-restart                  Restarts the firewall and prompt for a
#                                                  confirmation to accept or reject the new
#                                                  configuration
#
#          shorewall {generate|compile} [ <directory> ] ]<filename>
#                                                  Compile a pseudo restore file.
#
#          shorewall reload [ <directory name> ]   Safe reload
#
# Fatal Error
#
fatal_error() # $@ = Message
{
    echo "   $@" >&2
    exit 2
}

# Display a chain if it exists
#

showfirstchain() # $1 = name of chain
{
    awk \
    'BEGIN	 {prnt=0; rslt=1; }; \
    /^$/	 { next; };\
    /^Chain/	 {if ( prnt == 1 ) { rslt=0; exit 0; }; };\
    /Chain '$1'/ { prnt=1; }; \
		 { if (prnt == 1)  print; };\
    END		 { exit rslt; }' $TMPFILE
}

showchain() # $1 = name of chain
{
    if [ "$firstchain" = "Yes" ]; then
	if showfirstchain $1; then
	    firstchain=
	fi
    else
	awk \
	'BEGIN	     {prnt=0;};\
	/^$|^ pkts/  { next; };\
	/^Chain/     {if ( prnt == 1 ) exit; };\
	/Chain '$1'/ { prnt=1; };\
		     { if (prnt == 1)  print; }' $TMPFILE
    fi
}

#
# The 'awk' hack that compensates for bugs in iptables-save (or rather in the extension modules).
#

iptablesbug()
{
    if qt mywhich awk ; then
	awk 'BEGIN           {sline=""; };\
             /^-j/           { print sline $0; next };\
             /-m policy.*-j/ { print $0; next };\
             /-m policy/     { sline=$0; next };\
             /--mask ff/     { sub( /--mask ff/, "--mask 0xff" ) };\
                             {print ; sline="" }'
    else
	echo "   WARNING: You don't have 'awk' on this system so the output of the save command may be unusable" >&2
	cat
    fi
}

#
# Validate the value of RESTOREFILE
#
validate_restorefile() # $* = label
{
    case $RESTOREFILE in
	*/*)
	    echo "   ERROR: $@ must specify a simple file name: $RESTOREFILE" >&2
	    exit 2
	    ;;
    esac
}

#
# Set the configuration variables from shorewall.conf
#
get_config() {

    [ -z "$LOGFILE" ] && LOGFILE=/var/log/messages

    if [ ! -f $LOGFILE ]; then
	echo "LOGFILE ($LOGFILE) does not exist!" >&2
	exit 2
    fi
    #
    # See if we have a real version of "tail" -- use separate redirection so
    # that ash (aka /bin/sh on LRP) doesn't crap
    #
    if ( tail -n5 $LOGFILE > /dev/null 2> /dev/null ) ; then
	realtail="Yes"
    else
	realtail=""
    fi

    [ -n "$FW" ] || FW=fw

    [ -n "LOGFORMAT" ] && LOGFORMAT="${LOGFORMAT%%%*}"

    [ -n "$LOGFORMAT" ] || LOGFORMAT="Shorewall:"

    if [ -n "$IPTABLES" ]; then
	if [ ! -e "$IPTABLES" ]; then
	    echo "   ERROR: The program specified in IPTABLES does not exist or is not executable" >&2
	    exit 2
	fi
    else
	IPTABLES=$(mywhich iptables 2> /dev/null)
	if [ -z "$IPTABLES" ] ; then
	    echo "   ERROR: Can't find iptables executable" >&2
	    exit 2
	fi
    fi

    if [ -n "$SHOREWALL_SHELL" ]; then
	if [ ! -e "$SHOREWALL_SHELL" ]; then
	    echo "   ERROR: The program specified in SHOREWALL_SHELL does not exist or is not executable" >&2
	    exit 2
	fi
    fi

    [ -n "$RESTOREFILE" ] || RESTOREFILE=restore

    validate_restorefile RESTOREFILE

    export RESTOREFILE

    case $STARTUP_ENABLED in
	[Nn][Oo])
            echo "   WARNING: Shorewall startup is disabled. To enable startup, set STARTUP_ENABLED=Yes in /etc/shorewall/shorewall.conf" >&2
	    ;;
    esac

    case ${TC_ENABLED:=Internal} in
	[Nn][Oo])
	    TC_ENABLED=
	    ;;
    esac

}

#
# Clear descriptor 1 if it is a terminal
#
clear_term() {
    [ -t 1 ] && clear
}

#
# Delay $timeout seconds -- if we're running on a recent bash2 then allow
# <enter> to terminate the delay
#
timed_read ()
{
    read -t $timeout foo 2> /dev/null

    test $? -eq 2 && sleep $timeout
}

#
# Display the last $1 packets logged
#
packet_log() # $1 = number of messages
{
    local options

    [ -n "$realtail" ] && options="-n$1"

    if [ $VERBOSE -gt 1 ]; then
	grep "${LOGFORMAT}" $LOGFILE | \
	    sed s/" kernel:"// | \
	    sed s/" $host $LOGFORMAT"/" "/ | \
	    tail $options
    else
	grep "${LOGFORMAT}" $LOGFILE | \
	    sed s/" kernel:"// | \
	    sed s/" $host $LOGFORMAT"/" "/ | \
	    sed 's/MAC=.* SRC=/SRC=/' | \
	    tail $options
    fi
}

#
# Show traffic control information
#
show_tc() {

    show_one_tc() {
	local device=${1%@*}
	qdisc=$(tc qdisc list dev $device)

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s -d qdisc show dev $device
	    tc -s -d class show dev $device
	    echo
	fi
    }

    ip link list | \
    while read inx interface details; do
	case $inx in
	[0-9]*)
	    show_one_tc ${interface%:}
	    ;;
	*)
	    ;;
	esac
    done

}

#
# Show classifier information
#
show_classifiers() {

    show_one_classifier() {
	local device=${1%@*}
	qdisc=$(tc qdisc list dev $device)

	if [ -n "$qdisc" ]; then
	    echo Device $device:
	    tc -s filter ls dev $device
	    echo
	fi
    }

    ip link list | \
    while read inx interface details; do
	case $inx in
	[0-9]*)
	    show_one_classifier ${interface%:}
	    ;;
	*)
	    ;;
	esac
    done

}

#
# Watch the Firewall Log
#
logwatch() # $1 = timeout -- if negative, prompt each time that
	   #		     an 'interesting' packet count changes
{

    host=$(echo $HOSTNAME | sed 's/\..*$//')
    oldrejects=$($IPTABLES -L -v -n | grep 'LOG')

    if [ $1 -lt 0 ]; then
	timeout=$((- $1))
	pause="Yes"
    else
	pause="No"
	timeout=$1
    fi

    qt mywhich awk && haveawk=Yes || haveawk=

    while true; do
	clear_term
	echo "$banner $(date)"
	echo

	echo "Dropped/Rejected Packet Log"
	echo

	show_reset

	rejects=$($IPTABLES -L -v -n | grep 'LOG')

	if [ "$rejects" != "$oldrejects" ]; then
	    oldrejects="$rejects"

	    $RING_BELL

	    packet_log 40

	    if [ "$pause" = "Yes" ]; then
		echo
		echo $ECHO_N 'Enter any character to continue: '
		read foo
	    else
		timed_read
	    fi
	else
	    echo
	    packet_log 40
	    timed_read
	fi
    done
}

#
# Save currently running configuration
#
save_config() {
    [ "$nolock" ] || mutex_on

    if shorewall_is_started ; then
	[ -d /var/lib/shorewall ] || mkdir -p /var/lib/shorewall

	if [ -f $RESTOREPATH -a ! -x $RESTOREPATH ]; then
	    echo "   ERROR: $RESTOREPATH exists and is not a saved Shorewall configuration"
	else
	    case $RESTOREFILE in
		save|restore-base)
		    echo "   ERROR: Reserved file name: $RESTOREFILE"
		    ;;
		*)
		    if $IPTABLES -L dynamic -n > /var/lib/shorewall/save; then
			echo "   Dynamic Rules Saved"
			if [ -f /var/lib/shorewall/restore-base ]; then
			    cp -f /var/lib/shorewall/restore-base /var/lib/shorewall/restore-$$
			    if iptables-save | iptablesbug >> /var/lib/shorewall/restore-$$ ; then
				echo __EOF__ >> /var/lib/shorewall/restore-$$
				[ -f /var/lib/shorewall/restore-tail ] && \
				    cat /var/lib/shorewall/restore-tail >> /var/lib/shorewall/restore-$$
				mv -f /var/lib/shorewall/restore-$$ $RESTOREPATH
				chmod +x $RESTOREPATH
				echo "   Currently-running Configuration Saved to $RESTOREPATH"

				rm -f ${RESTOREPATH}-ipsets

				case ${SAVE_IPSETS:-No} in
				    [Yy][Ee][Ss])
                                        RESTOREPATH=${RESTOREPATH}-ipsets

					f=/var/lib/shorewall/restore-$$

					echo "#!/bin/sh" > $f
					echo "#This ipset restore file generated $(date) by Shorewall $version" >> $f
					echo  >> $f
					echo ". /usr/share/shorewall/functions" >> $f
					echo  >> $f
					grep '^MODULE' /var/lib/shorewall/restore-base >>  $f
					echo "reload_kernel_modules << __EOF__" >> $f
					grep 'loadmodule ip_set' /var/lib/shorewall/restore-base >>  $f
                                        echo "__EOF__" >> $f
					echo  >> $f
					echo "ipset -U :all: :all:" >> $f
					echo "ipset -F" >> $f
					echo "ipset -X" >> $f
					echo "ipset -R << __EOF__" >> $f
					ipset -S >> $f
					echo "__EOF__" >> $f
					mv -f $f $RESTOREPATH
					chmod +x $RESTOREPATH
					echo "   Current Ipset Contents Saved to $RESTOREPATH"
					;;
				    [Nn][Oo])
				        ;;
				    *)
				        echo "   WARNING: Invalid value ($SAVE_IPSETS) for SAVE_IPSETS. Ipset contents not saved"
					;;
				esac
			    else
			        rm -f /var/lib/shorewall/restore-$$
				echo "   ERROR: Currently-running Configuration Not Saved"
			    fi
			else
			    echo "   ERROR: /var/lib/shorewall/restore-base does not exist"
			fi
		    else
		        echo "Error Saving the Dynamic Rules"
		    fi
		    ;;
	    esac
	fi
    else
	echo "Shorewall isn't started"
    fi

    [ "$nolock" ] || mutex_off
}
#
# Start Command Executor
#
start_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE - 1 ))
			    option=${option#q}
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			f*)
			    FAST=Yes
			    option=${option#f}
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
	0)
	    ;;
	1)
	    [ -n "$SHOREWALL_DIR" -o -n "$FAST" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$
	    export SHOREWALL_DIR
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export NOROUTES

    if [ -n "$FAST" ]; then
	if qt mywhich make; then
	    make -qf /etc/shorewall/Makefile || FAST=
	fi

	if [ -n "$FAST" ]; then

	    RESTOREPATH=/var/lib/shorewall/$RESTOREFILE

	    if [ -x $RESTOREPATH ]; then
		if [ -x ${RESTOREPATH}-ipsets ]; then
		    echo Restoring Ipsets...
		    #
		    # We must purge iptables to be sure that there are no
		    # references to ipsets
		    #
		    iptables -F
		    iptables -X
		    ${RESTOREPATH}-ipsets
		fi

		echo Restoring Shorewall...
		$RESTOREPATH
		date > /var/lib/shorewall/restarted
		echo Shorewall restored from $RESTOREPATH
	    else
		exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock start
	    fi
	else
	    exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock start
	fi
    else
	exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock start
    fi
}
#
# Compile Command Executor
#
compile_command() {
    local finished=0

    while [ $finished -eq 0 ]; do
	[ $# -eq 0 ] && usage 1
	option=$1
	case $option in
	    -*)
		option=${option#-}

		[ -z "$option" ] && usage 1

		while [ -n "$option" ]; do
		    case $option in
			e*)
			    EXPORT=Yes
			    option=${option#e}
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE - 1 ))
			    option=${option#q}
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			p*)
			    export PROGRAM=Yes
			    option=${option#p}
			    ;;
			-)
			    finished=1
			    option=
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    file=

    case $# in
	1)
	    file=$1
	    ;;
	2)
	    [ -n "$SHOREWALL_DIR" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$1
	    export SHOREWALL_DIR
	    file=$2
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export EXPORT

    exec $SHOREWALL_SHELL /usr/share/shorewall/compiler $debugging generate $file
}
#
# Restart Command Executor
#
restart_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE - 1 ))
			    option=${option#q}
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
	0)
	    ;;
	1)
	    [ -n "$SHOREWALL_DIR" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$1
	    export SHOREWALL_DIR
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export NOROUTES

    exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock restart
}
#
# Check Command Executor
#
check_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE - 1 ))
			    option=${option#q}
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
	0)
	    ;;
	1)
	    [ -n "$SHOREWALL_DIR" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$1
	    export SHOREWALL_DIR
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export NOROUTES

    exec $SHOREWALL_SHELL /usr/share/shorewall/compiler $debugging $nolock check
}
#
# Reload Command Executor
#
reload_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE - 1 ))
			    option=${option#q}
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
	0)
	    ;;
	1)
	    [ -n "$SHOREWALL_DIR" ] && usage 2

	    if [ ! -d $1 ]; then
		if [ -e $1 ]; then
		    echo "$1 is not a directory" >&2 && exit 2
		else
		    echo "Directory $1 does not exist" >&2 && exit 2
		fi
	    fi

	    SHOREWALL_DIR=$1
	    export SHOREWALL_DIR
	    ;;
	*)
	    usage 1
	    ;;
    esac

    export NOROUTES

    [ -n "$nolock" ] || mutex_on

    if $SHOREWALL_SHELL /usr/share/shorewall/compiler $debugging $nolock compile /var/lib/shorewall/.reload; then
	$0 nolock $(make_verbose) restore .reload
    fi

    [ -n "$nolock" ] || mutex_off
}
#
# Show Command Executor
#
show_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#q}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ -n "$debugging" ] && set -x
    case "$1" in
    connections)
	[ $# -gt 1 ] && usage 1
	echo "Shorewall-$version Connections at $HOSTNAME - $(date)"
	echo
	cat /proc/net/ip_conntrack
	;;
    nat)
	[ $# -gt 1 ] && usage 1
	echo "Shorewall-$version NAT Table at $HOSTNAME - $(date)"
	echo
	show_reset
	$IPTABLES -t nat -L $IPT_OPTIONS
	;;
    tos|mangle)
	[ $# -gt 1 ] && usage 1
	echo "Shorewall-$version Mangle Table at $HOSTNAME - $(date)"
	echo
	show_reset
	$IPTABLES -t mangle -L $IPT_OPTIONS
	;;
    log)
	[ $# -gt 1 ] && usage 1
	echo "Shorewall-$version Log at $HOSTNAME - $(date)"
	echo
	show_reset
	host=$(echo $HOSTNAME | sed 's/\..*$//')
	packet_log 20
	;;
    tc)
	[ $# -gt 1 ] && usage 1
	echo "Shorewall-$version Traffic Control at $HOSTNAME - $(date)"
	echo
	show_tc
	;;
    classifiers)
	[ $# -gt 1 ] && usage 1
	echo "Shorewall-$version Clasifiers at $HOSTNAME - $(date)"
	echo
	show_classifiers
	;;
    zones)
	[ $# -gt 1 ] && usage 1
	if [ -f /var/lib/shorewall/zones ]; then
	    echo "Shorewall-$version Zones at $HOSTNAME - $(date)"
	    echo
	    while read zone type hosts; do
		echo "$zone ($type)"
		for host in $hosts; do
		    echo "   $host"
		done
	    done < /var/lib/shorewall/zones
	    echo
	else
	    echo "   ERROR: /var/lib/shorewall/zones does not exist" >&2
	    exit 1
	fi
	;;
    capabilities)
	[ $# -gt 1 ] && usage 1
	determine_capabilities
	report_capabilities
	;;
    actions)
	[ $# -gt 1 ] && usage 1
	echo "allowBcast          # Silently Allow Broadcast/multicast"
	echo "dropBcast           # Silently Drop Broadcast/multicast"
	echo "dropNotSyn          # Silently Drop Non-syn TCP packets"
	echo "rejNotSyn           # Silently Reject Non-syn TCP packets"
	echo "dropInvalid         # Silently Drop packets that are in the INVALID conntrack state"
	echo "allowInvalid        # Accept packets that are in the INVALID conntrack state."
	echo "allowoutUPnP        # Allow traffic from local command 'upnpd'"
	echo "allowinUPnP         # Allow UPnP inbound (to firewall) traffic"
	echo "forwardUPnP         # Allow traffic that upnpd has redirected from"
	cat /usr/share/shorewall/actions.std /etc/shorewall/actions | grep -Ev '^\#|^$'
	;;
    macros)
	[ $# -gt 1 ] && usage 1
	for macro in /usr/share/shorewall/macro.*; do
	    foo=`grep 'This macro' $macro | head -n 1`
	    if [ -n "$foo" ]; then
		macro=${macro#*.}
		foo=${foo%.*}
		echo "   $macro  ${foo#\#}" | sed 's/This macro //'
	    fi
	done
	;;
    *)
	echo "Shorewall-$version $([ $# -gt 0 ] && echo Chains || echo Chain) $* at $HOSTNAME - $(date)"
	echo
	show_reset
	if [ $# -gt 0 ]; then
	    for chain in $*; do
		$IPTABLES -L $chain $IPT_OPTIONS
	    done
	else
	    $IPTABLES -L $IPT_OPTIONS
	fi
	;;
    esac
}
#
# Dump Command Executor
#
dump_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#q}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    [ -n "$debugging" ] && set -x
    [ $# -eq 0 ] || usage 1
    clear_term
    echo "Shorewall-$version Dump at $HOSTNAME - $(date)"
    echo
    show_reset
    host=$(echo $HOSTNAME | sed 's/\..*$//')
    $IPTABLES -L $IPT_OPTIONS
    echo
    packet_log 20

    heading "NAT Table"
    $IPTABLES -t nat -L $IPT_OPTIONS

    heading "Mangle Table"
    $IPTABLES -t mangle -L $IPT_OPTIONS
    echo
    cat /proc/net/ip_conntrack

    heading "IP Configuration"
    ip addr ls

    heading "IP Stats"
    ip -stat link ls

    if qt mywhich brctl; then
	heading "Bridges"
	brctl show
    fi

    heading "/proc"
    show_proc /proc/version
    show_proc /proc/sys/net/ipv4/ip_forward
    show_proc /proc/sys/net/ipv4/icmp_echo_ignore_all

    for directory in /proc/sys/net/ipv4/conf/*; do
	for file in proxy_arp arp_filter arp_ignore rp_filter log_martians; do
	    show_proc $directory/$file
	done
    done

    if [ -n "$(ip rule ls)" ]; then
	heading "Routing Rules"
	ip rule ls
	ip rule ls | while read rule; do
	    echo ${rule##* }
	done | sort -u | while read table; do
	    heading "Table $table:"
	    ip route ls table $table
	done
    else
	heading "Routing Table"
	ip route ls
    fi

    heading "ARP"
    arp -na

    if qt mywhich lsmod; then
	heading "Modules"
	lsmod | grep -E '^ip_|^ipt_|^iptable_'
    fi

    determine_capabilities
    echo
    report_capabilities

    if [ -n "$TC_ENABLED" ]; then
	echo
	echo "Traffic Control"
	echo
	show_tc
	echo "Traffic Filters"
	echo
	show_classifiers
	fi
}
#
# Restore Comand Executor
#
restore_command() {
    local finished=0

    while [ $finished -eq 0 -a $# -gt 0 ]; do
	option=$1
	case $option in
	    -*)
		option=${option#-}

		while [ -n "$option" ]; do
		    case $option in
			-)
			    finished=1
			    option=
			    ;;
			q*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#q}
			    ;;
			v*)
			    VERBOSE=$(($VERBOSE + 1 ))
			    option=${option#v}
			    ;;
			n*)
			    NOROUTES=Yes
			    option=${option#n}
			    ;;
			*)
			    usage 1
			    ;;
		    esac
		done
		shift
		;;
	    *)
		finished=1
		;;
	esac
    done

    case $# in
    0)
	;;
    1)
	RESTOREFILE="$1"
	validate_restorefile '<restore file>'
	;;
    *)
	usage 1
	;;
    esac

    RESTOREPATH=/var/lib/shorewall/$RESTOREFILE

    export NOROUTES

    [ -n "$nolock" ] || mutex_on

    if [ -x $RESTOREPATH ]; then
	if [ -x ${RESTOREPATH}-ipsets ] ; then
	    echo Restoring Ipsets...
	    iptables -F
	    iptables -X
	    ${RESTOREPATH}-ipsets
	fi

	echo Restoring Shorewall...
	$RESTOREPATH && echo "Shorewall restored from /var/lib/shorewall/$RESTOREFILE"
	[ -n "$nolock" ] || mutex_off
    else
	echo "File /var/lib/shorewall/$RESTOREFILE: file not found"
	[ -n "$nolock" ] || mutex_off
	exit 2
    fi
}
#
# Help information
#
help()
{
    [ -x $HELP ] && { export version; exec $HELP $*; }
    echo "Help subsystem is not installed at $HELP"
}

#
# Give Usage Information
#
usage() # $1 = exit status
{
    echo "Usage: $(basename $0) [debug|trace] [nolock] [ -x ] [ -q ] [ -v ] [ -n ] <command>"
    echo "where <command> is one of:"
    echo "   add <interface>[:<host-list>] ... <zone>"
    echo "   allow <address> ..."
    echo "   check [ -q ] [ <directory> ]"
    echo "   clear"
    echo "   compile  [ -e ] [ -p ] [ <directory name> ] <path name>"
    echo "   delete <interface>[:<host-list>] ... <zone>"
    echo "   drop <address> ..."
    echo "   dump [ -q ] [ -v ]"
    echo "   forget [ <file name> ]"
    echo "   generate  [ -e ] [-p ] [ <directory name> ] <path name>"
    echo "   help [ <command > | host | address ]"
    echo "   hits"
    echo "   ipcalc { <address>/<vlsm> | <address> <netmask> }"
    echo "   ipdecimal { <address> | <integer> }"
    echo "   iprange <address>-<address>"
    echo "   logwatch [ -v ] [<refresh interval>]"
    echo "   refresh"
    echo "   reject <address> ..."
    echo "   reset"
    echo "   reload [ -n ] [ -q ] [ <directory> ]"
    echo "   restart [ -n ] [ -q ] [ <directory> ]"
    echo "   restore [ -n ] [ -q ] [ <file name> ]"
    echo "   save [ <file name> ]"
    echo "   show [ -v ] [<chain> [ <chain> ... ]|actions|capabilities|classifiers|connections|log|macros|mangle|nat|tc|zones]"
    echo "   start [ -f ] [ -n ] [ -q ] [ <directory> ]"
    echo "   stop"
    echo "   status"
    echo "   try <directory> [ <timeout> ]"
    echo "   version"
    echo "   safe-start"
    echo "   safe-restart"
    echo
    exit $1
}

#
# Display the time that the counters were last reset
#
show_reset() {
    [ -f /var/lib/shorewall/restarted ] && \
	echo "Counters reset $(cat /var/lib/shorewall/restarted)" && \
	echo
}

#
# Display's the passed file name followed by "=" and the file's contents.
#
show_proc() # $1 = name of a file
{
    [ -f $1 ] && echo "   $1 = $(cat $1)"
}

read_yesno_with_timeout() {
    read -t 60 yn 2> /dev/null
    if [ $? -eq 2 ]
    then
	# read doesn't support timeout
	test -x /bin/bash || return 2 # bash is not installed so the feature is not available
	/bin/bash -c 'read -t 60 yn ; if [ "$yn" == "y" ] ; then exit 0 ; else exit 1 ; fi' # invoke bash and use its version of read
	return $?
    else
	# read supports timeout
	case "$yn" in
	    y|Y)
		return 0
		;;
	    *)
		return 1
		;;
	esac
    fi
}

#
# Print a heading with leading and trailing black lines
#
heading() {
    echo
    echo "$@"
    echo
}

#
# Create the appropriate -q option to pass oneward
#
make_verbose() {
    local v=$VERBOSE

    if [ $VERBOSE -gt 0 ]; then
	local option=-

	while [ $v -gt 0 ]; do
	    option="${option}v"
	    v=$(($v - 1))
	done

	echo $option
    fi
}

#
# Execution begins here
#
debugging=

if [ $# -gt 0 ] && [ "$1" = "debug" -o "$1" = "trace" ]; then
    debugging=debug
    shift
fi

nolock=

if [ $# -gt 0 ] && [ "$1" = "nolock" ]; then
    nolock=nolock
    shift
fi

[ -n "${VERBOSE:=2}" ]

SHOREWALL_DIR=
IPT_OPTIONS="-nv"
FAST=
export VERBOSE
NOROUTES=
EXPORT=
noroutes=

finished=0

while [ $finished -eq 0 ]; do
    [ $# -eq 0 ] && usage 1
    option=$1
    case $option in
	-)
	    finished=1
	    ;;
	-*)
	    option=${option#-}

	    [ -z "$option" ] && usage 1

	    while [ -n "$option" ]; do
		case $option in
		    c)
			[ $# -eq 1 ] && usage 1

			if [ ! -d $2 ]; then
			    if [ -e $2 ]; then
				echo "$2 is not a directory" >&2 && exit 2
			    else
				echo "Directory $2 does not exist" >&2 && exit 2
			    fi
			fi

			SHOREWALL_DIR=$2
			option=
			shift
			;;
		    e*)
			EXPORT=Yes
			option=${option#e}
			;;
		    x*)
			IPT_OPTIONS="-xnv"
			option=${option#x}
			;;
		    q*)
			VERBOSE=$(($VERBOSE - 1 ))
			option=${option#q}
			;;
		    f*)
			FAST=Yes
			option=${option#f}
			;;
		    v*)
			VERBOSE=$(($VERBOSE + 1 ))
			option=${option#q}
			;;
		    n*)
			NOROUTES=Yes
			option=${option#n}
			;;
		    -)
			finished=1
			option=
			;;
		    *)
			usage 1
			;;
		esac
	    done
	    shift
	    ;;
	*)
	    finished=1
            ;;
    esac
done

if [ $# -eq 0 ]; then
    usage 1
fi

[ -n "$SHOREWALL_DIR" ] && export SHOREWALL_DIR
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
MUTEX_TIMEOUT=

SHARED_DIR=/usr/share/shorewall
FIREWALL=$SHARED_DIR/firewall
FUNCTIONS=$SHARED_DIR/functions
VERSION_FILE=$SHARED_DIR/version
HELP=$SHARED_DIR/help

if [ -f $FUNCTIONS ]; then
    . $FUNCTIONS
else
    echo "$FUNCTIONS does not exist!" >&2
    exit 2
fi

ensure_config_path

config=$(find_file shorewall.conf)

if [ -f $config ]; then
    if [ -r $config ]; then
	. $config
    else
	echo "Cannot read $config! (Hint: Are you root?)" >&2
	exit 1
    fi
else
    echo "$config does not exist!" >&2
    exit 2
fi

ensure_config_path

export CONFIG_PATH

get_config

if [ ! -f $FIREWALL ]; then
    echo "ERROR: Shorewall is not properly installed"
    if [ -L $FIREWALL ]; then
	echo "	     $FIREWALL is a symbolic link to a"
	echo "	     non-existant file"
    else
	echo "	     The file $FIREWALL  does not exist"
    fi

    exit 2
fi

if [ -f $VERSION_FILE ]; then
    version=$(cat $VERSION_FILE)
else
    echo "ERROR: Shorewall is not properly installed"
    echo "	 The file $VERSION_FILE does not exist"
    exit 1
fi

banner="Shorewall-$version Status at $HOSTNAME -"

case $(echo -e) in
    -e*)
	RING_BELL="echo \a"
	;;
    *)
	RING_BELL="echo -e \a"
	;;
esac

case $(echo -n "Testing") in
    -n*)
	ECHO_N=
	;;
    *)
	ECHO_N=-n
	;;
esac

COMMAND=$1

case "$COMMAND" in
    start)
	shift

	start_command $@

	;;
    stop|reset|clear|refresh)
	[ $# -ne 1 ] && usage 1
	export NOROUTES
	exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $COMMAND
	;;
    compile|generate)
	shift

	compile_command $@

	;;
    restart)
	shift

	restart_command $@

	;;
    check)
	shift

	check_command $@

	;;
    reload)
	shift

	reload_command $@

	;;
    add|delete)
	[ $# -lt 3 ] && usage 1
	exec $SHOREWALL_SHELL $FIREWALL $debugging $nolock $@
	;;
    show|list)
    	shift

    	show_command $@

	;;
    status)
	[ $# -eq 1 ] || usage 1
	echo "Shorewall-$version Status at $HOSTNAME - $(date)"
	echo
	if shorewall_is_started ; then
	    echo "Shorewall is running"
	    status=0
	else
	    echo "Shorewall is stopped"
	    status=4
	fi

	if [ -f /var/lib/shorewall/state ]; then
	    state="$(cat /var/lib/shorewall/state)"
	    case $state in
		Stopped*|Clear*)
		    status=3
		    ;;
	    esac
	else
	    state=Unknown
	fi
	echo "State:$state"
	echo
	exit $status
	;;
    dump)
    	shift

    	dump_command $@

	;;
    hits)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] || usage 1
	clear_term
	echo "Shorewall-$version Hits at $HOSTNAME - $(date)"
	echo

	timeout=30

	if [ $(grep -c "$LOGFORMAT" $LOGFILE ) -gt 0 ] ; then
	    echo "   HITS IP		  DATE"
	    echo "   ---- --------------- ------"
	    grep "$LOGFORMAT" $LOGFILE | sed 's/\(.\{6\}\)\(.*SRC=\)\(.*\)\( DST=.*\)/\3	\1/' | sort | uniq -c | sort -rn
	    echo ""

	    echo "   HITS IP		  PORT"
	    echo "   ---- --------------- -----"
	    grep "$LOGFORMAT" $LOGFILE | sed 's/\(.*SRC=\)\(.*\)\( DST=.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2	\4/
						t
						s/\(.*SRC=\)\(.*\)\( DST=.*\)/\2/' | sort | uniq -c | sort -rn
	    echo ""

	    echo "   HITS DATE"
	    echo "   ---- ------"
	    grep "$LOGFORMAT" $LOGFILE | sed 's/\(.\{6\}\)\(.*\)/\1/' | sort | uniq -c | sort -rn
	    echo ""

	    echo "   HITS  PORT SERVICE(S)"
	    echo "   ---- ----- ----------"
	    grep "$LOGFORMAT.*DPT" $LOGFILE | sed 's/\(.*DPT=\)\([0-9]\{1,5\}\)\(.*\)/\2/' | sort | uniq -c | sort -rn | \
	    while read count port ; do
		# List all services defined for the given port
		srv=$(grep "^[^#].*\\b$port/" /etc/services | cut -f 1 | sort -u)
		srv=$(echo $srv | sed 's/ /,/g')

		if [ -n "$srv" ] ; then
		    printf '%7d %5d %s\n' $count $port $srv
		else
		    printf '%7d %5d\n' $count $port
		fi
	    done
	fi
	;;
    version)
	echo $version
	;;
    try)
	[ -n "$SHOREWALL_DIR" ] && startup_error "ERROR: -c option may not be used with \"try\""
	[ $# -lt 2 -o $# -gt 3 ] && usage 1
	[ $VERBOSE -gt 0 ] && VERBOSE=$(make_verbose)
	[ -n "$NOROUTES" ] && NOROUTES=-n
	if ! $0 $debugging $VERBOSE -c $2 restart; then
	    if ! $IPTABLES -L shorewall > /dev/null 2> /dev/null; then
		$0 $VERBOSE $NOROUTES start
	    fi
	elif ! $IPTABLES -L shorewall > /dev/null 2> /dev/null; then
	    $0 $VERBOSE $NOROUTES start
	elif [ $# -eq 3 ]; then
	    sleep $3
	    $0 $VERBOSE $NOROUTES restart
	fi
	;;
    logwatch)
	shift

	finished=0

	while [ $finished -eq 0 ]; do
	    [ $# -eq 0 ] && usage 1
	    option=$1
	    case $option in
		-*)
		    option=${option#-}

		    [ -z "$option" ] && usage 1

		    while [ -n "$option" ]; do
			case $option in
			    v*)
				VERBOSE=$(($VERBOSE + 1 ))
				option=${option#q}
				;;
			    -)
				finished=1
				option=
				;;
			    *)
				usage 1
				;;
			esac
		    done
		    shift
		    ;;
		*)
		    finished=1
		    ;;
	    esac
	done

	[ -n "$debugging" ] && set -x

	if [ $# -eq 1 ]; then
	    logwatch $1
	elif [ $# -eq 0 ]; then
	    logwatch 30
	else
	    usage 1
	fi
	;;
    drop)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    qt $IPTABLES -D dynamic -s $1 -j reject
	    qt $IPTABLES -D dynamic -s $1 -j DROP
	    $IPTABLES -A dynamic -s $1 -j DROP || break 1
	    echo "$1 Dropped"
	done
	mutex_off
	;;
    reject)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    qt $IPTABLES -D dynamic -s $1 -j reject
	    qt $IPTABLES -D dynamic -s $1 -j DROP
	    $IPTABLES -A dynamic -s $1 -j reject || break 1
	    echo "$1 Rejected"
	done
	mutex_off
	;;
    allow)
	[ -n "$debugging" ] && set -x
	[ $# -eq 1 ] && usage 1
	mutex_on
	while [ $# -gt 1 ]; do
	    shift
	    if	qt $IPTABLES -D dynamic -s $1 -j reject || qt $IPTABLES -D dynamic -s $1 -j DROP; then
		echo "$1 Allowed"
	    else
		echo "$1 Not Dropped or Rejected"
	    fi
	done
	mutex_off
	;;
    save)
	[ -n "$debugging" ] && set -x

	case $# in
	1)
	    ;;
	2)
	    RESTOREFILE="$2"
	    validate_restorefile '<restore file>'
	    ;;
	*)
	    usage 1
	    ;;
	esac

	RESTOREPATH=/var/lib/shorewall/$RESTOREFILE

	save_config

	;;
    forget)
	case $# in
	1)
	    ;;
	2)
	    RESTOREFILE="$2"
	    validate_restorefile '<restore file>'
	    ;;
	*)
	    usage 1
	    ;;
	esac


	RESTOREPATH=/var/lib/shorewall/$RESTOREFILE

	if [ -x $RESTOREPATH ]; then

	    if [ -x ${RESTOREPATH}-ipsets ]; then
		rm -f ${RESTOREPATH}-ipsets
		echo "    ${RESTOREPATH}-ipsets removed"
	    fi

	    rm -f $RESTOREPATH
	    echo "    $RESTOREPATH removed"
	elif [ -f $RESTOREPATH ]; then
	    echo "   $RESTOREPATH exists and is not a saved Shorewall configuration"
	fi
	rm -f /var/lib/shorewall/save
	;;
    ipcalc)
    	[ -n "$debugging" ] && set -x
	if [ $# -eq 2 ]; then
	    address=${2%/*}
	    vlsm=${2#*/}
	elif [ $# -eq 3 ]; then
	    address=$2
	    vlsm=$(ip_vlsm $3)
	else
	    usage 1
	fi

	[ -z "$vlsm" ] && exit 2
	[ "x$address" = "x$vlsm" ] && usage 2
	[ $vlsm -gt 32 ] && echo "Invalid VLSM: /$vlsm" >&2 && exit 2

	address=$address/$vlsm

	                                   echo "   CIDR=$address"
	temp=$(ip_netmask $address);       echo "   NETMASK=$(encodeaddr $temp)"
	temp=$(ip_network $address);       echo "   NETWORK=$temp"
	temp=$(broadcastaddress $address); echo "   BROADCAST=$temp"
	;;

    iprange)
	[ -n "$debugging" ] && set -x
	case $2 in
	    *.*.*.*-*.*.*.*)
		ip_range $2
		;;
	    *)
		usage 1
		;;
	esac
	;;
    ipdecimal)
	[ -n "$debugging" ] && set -x
	case $2 in
	    *.*.*.*)
		echo "   $(decodeaddr $2)"
		;;
	    *)
		echo "   $(encodeaddr $2)"
		;;
	esac
	;;
    restore)
	shift

	restore_command $@

        ;;
    call)
	[ -n "$debugging" ] && set -x
	#
	# Undocumented way to call functions in /usr/share/shorewall/functions directly
	#
	shift
	$@
	;;
    help)
	shift
	[ $# -ne 1 ] && usage 1
	help $@
	;;
    safe-restart|safe-start)
	# test is the shell supports timed read
	read -t 0 junk 2> /dev/null
	if [ $? -eq 2 -a ! -x /bin/bash ]
	then
	    echo "Your shell does not support a feature required to execute this command".
	    exit 2
	fi

	[ $VERBOSE -gt 0 ] && VERBOSE=$(make_verbose)

	mutex_on

	if shorewall_is_started
	then
	    running=0
	else
	    running=1
	fi

	if [ "$1" = "safe-start" -a  $running -eq 0 ]
	then
	    # the command is safe-start but the firewall is already running
	    $0 $debugging nolock $VERBOSE start
	    ret=$?
	    mutex_off
	    exit 0
	fi

	if [ "$1" = "safe-start" -o  $running -ne 0 ]
	then
	    # the command is safe-start or shorewall is not started yet
	    command="start"
	else
	    # the command is safe-restart and the firewall is already running
	    command="restart"
	fi

	if [ "$command" = "restart" ]
	then
	    # save previous configuration
	    $0 $debugging nolock save "safe-start-restart"
	fi

	$0 $debugging nolock $VERBOSE $command

	echo -n "Do you want to accept the new firewall configuration? [y/n] "
	read_yesno_with_timeout
	if [ $? -eq 0 ]
	then
	    echo "New configuration has been accepted"
	    if [ "$command" = "restart" ]
	    then
		# removed previous configuration
		rm /var/lib/shorewall/safe-start-restart
	    fi
	else
	    if [ "$command" = "restart" ]
	    then
		$0 $debugging nolock restore "safe-start-restart"
		rm /var/lib/shorewall/safe-start-restart
	    else
		$0 $debugging nolock clear
	    fi

	    mutex_off
	    echo "New configuration has been rejected and the old one restored"
	    exit 2
	fi

	mutex_off
	[ $? -eq 0 ] && [ -n "$SUBSYSLOCK" ] && touch $SUBSYSLOCK
	;;
    *)
	usage 1
	;;

esac