shorewall_code/Shorewall6-lite/manpages/shorewall6-lite.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall6-lite</refentrytitle>

    <manvolnum>8</manvolnum>

    <refmiscinfo>Administrative Commands</refmiscinfo>
  </refmeta>

  <refnamediv>
    <refname>shorewall6-lite</refname>

    <refpurpose>Administration tool for Shoreline 6 Firewall Lite (Shorewall6
    Lite)</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg rep="norepeat">-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>add</option></arg>

      <arg choice="plain"
      rep="repeat"><replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]</arg>

      <arg choice="plain"><replaceable>zone</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>allow</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>call</option></arg>

      <arg
      choice="plain"><replaceable>function</replaceable><arg><replaceable>parameter</replaceable>
      ...</arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg
      choice="plain"><option>clear</option><arg><option>-f</option></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>close</option><arg choice="req">
      <replaceable>open-number</replaceable> |
      <replaceable>source</replaceable><replaceable>dest</replaceable><arg><replaceable>protocol</replaceable><arg>
      <replaceable>port</replaceable> </arg></arg></arg><replaceable>
      </replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>close</option><replaceable>
      source</replaceable><replaceable> dest</replaceable><arg>
      <replaceable>protocol</replaceable><arg> <replaceable>port</replaceable>
      </arg> </arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg rep="norepeat">-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>delete</option></arg>

      <arg choice="plain"
      rep="repeat"><replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]</arg>

      <arg choice="plain"><replaceable>zone</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>disable</option></arg>

      <arg choice="plain">{ <replaceable>interface</replaceable> |
      <replaceable>provider</replaceable> }</arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>drop</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>dump</option></arg>

      <arg><option>-x</option></arg>

      <arg><option>-l</option></arg>

      <arg><option>-m</option></arg>

      <arg><option>-c</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>enable</option></arg>

      <arg choice="plain">{ <replaceable>interface</replaceable> |
      <replaceable>provider</replaceable> }</arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>forget</option></arg>

      <arg><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>help</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg
      choice="plain"><option>hits</option><arg><option>-t</option></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>iptrace</option></arg>

      <arg choice="plain"><replaceable>iptables match
      expression</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>logdrop</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>logwatch</option></arg>

      <arg><option>-m</option></arg>

      <arg><replaceable>refresh-interval</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>logreject</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>noiptrace</option></arg>

      <arg choice="plain"><replaceable>iptables match
      expression</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>open</option><replaceable>
      source</replaceable><replaceable> dest</replaceable><arg>
      <replaceable>protocol</replaceable><arg> <replaceable>port</replaceable>
      </arg> </arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>reenable</option></arg>

      <arg choice="plain">{ <replaceable>interface</replaceable> |
      <replaceable>provider</replaceable> }</arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>reject</option></arg>

      <arg choice="plain"><replaceable>address</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>reset</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>restart</option></arg>

      <arg><option>-n</option></arg>

      <arg><option>-p</option></arg>

      <arg><option>-C</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>restore</option></arg>

      <arg><option>-C</option></arg>

      <arg><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>run</option></arg>

      <arg choice="plain">command</arg>

      <arg><replaceable>parameter ...</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>save</option></arg>

      <arg><option>-C</option></arg>

      <arg choice="opt"><replaceable>filename</replaceable></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>savesets</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg><option>-b</option></arg>

      <arg><option>-x</option></arg>

      <arg><option>-l</option></arg>

      <arg><option>-t</option>
      {<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw|rawpost</option>}</arg>

      <arg><arg><option>chain</option></arg><arg choice="plain"
      rep="repeat"><replaceable>chain</replaceable></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg><option>-f</option></arg>

      <arg choice="plain"><option>capabilities</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg><option>-x</option></arg>

      <arg choice="plain"><option>{bl|blacklists}</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg
      choice="req"><option>classifiers|connections|config|events|filters|ip|ipa|zones|policies|marks</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg choice="plain"><option>event</option><arg
      choice="plain"><replaceable>event</replaceable></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg><option>-c</option></arg>

      <arg choice="plain"><option>routing</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg><option>-x</option></arg>

      <arg choice="req"><option>mangle|nat|raw|rawpost</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg choice="plain"><option>tc</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="req"><option>show | list | ls </option></arg>

      <arg><option>-m</option></arg>

      <arg choice="plain"><option>log</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>start</option></arg>

      <arg><option>-n</option></arg>

      <arg><option>-p</option></arg>

      <arg><option>-f</option></arg>

      <arg><option>-C</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg
      choice="opt"><option>trace</option>|<option>debug</option><arg><option>nolock</option></arg></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><option>stop</option></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg choice="plain"><arg
      choice="plain"><option>status</option><arg><option>-i</option></arg></arg></arg>
    </cmdsynopsis>

    <cmdsynopsis>
      <command>shorewall6-lite</command>

      <arg choice="opt"><option>trace</option>|<option>debug</option></arg>

      <arg>-<replaceable>options</replaceable></arg>

      <arg
      choice="plain"><option>version</option><arg><option>-a</option></arg></arg>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The shorewall6-lite utility is used to control the Shoreline
    Firewall Lite (Shorewall Lite).</para>
  </refsect1>

  <refsect1>
    <title>Options</title>

    <para>The <option>trace</option> and <option>debug</option> options are
    used for debugging. See <ulink
    url="http://www.shorewall.net/starting_and_stopping_shorewall.htm#Trace">http://www.shorewall.net/starting_and_stopping_shorewall.htm#Trace</ulink>.</para>

    <para>The <option>nolock</option> option prevents the command from
    attempting to acquire the shorewall6-lite lockfile. It is useful if you
    need to include <command>shorewall</command> commands in the
    <filename>started</filename> <ulink
    url="../shorewall_extension_scripts.html">extension script</ulink>.</para>

    <para>The <emphasis>options</emphasis> control the amount of output that
    the command produces. They consist of a sequence of the letters <emphasis
    role="bold">v</emphasis> and <emphasis role="bold">q</emphasis>. If the
    options are omitted, the amount of output is determined by the setting of
    the VERBOSITY parameter in <ulink
    url="shorewall.conf.html">shorewall6.conf</ulink>(5). Each <emphasis
    role="bold">v</emphasis> adds one to the effective verbosity and each
    <emphasis role="bold">q</emphasis> subtracts one from the effective
    VERBOSITY. Alternately, <emphasis role="bold">v</emphasis> may be followed
    immediately with one of -1,0,1,2 to specify VERBOSITY. There may be no
    white-space between <emphasis role="bold">v</emphasis> and the
    VERBOSITY.</para>

    <para>The <emphasis>options</emphasis> may also include the letter
    <option>t</option> which causes all progress messages to be
    timestamped.</para>
  </refsect1>

  <refsect1>
    <title>Commands</title>

    <para>The available commands are listed below.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">add </emphasis>{
        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
        <replaceable>host-list</replaceable> }</term>

        <listitem>
          <para>Adds a list of hosts or subnets to a dynamic zone usually used
          with VPN's.</para>

          <para>The <replaceable>interface</replaceable> argument names an
          interface defined in the <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
          file. A <replaceable>host-list</replaceable> is comma-separated list
          whose elements are host or network addresses.</para>

          <caution>
            <para>The <command>add</command> command is not very robust. If
            there are errors in the <replaceable>host-list</replaceable>, you
            may see a large number of error messages yet a subsequent
            <command>shorewall6-lite show zones</command> command will
            indicate that all hosts were added. If this happens, replace
            <command>add</command> by <command>delete</command> and run the
            same command again. Then enter the correct command.</para>
          </caution>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">allow
        </emphasis><replaceable>address</replaceable></term>

        <listitem>
          <para>Re-enables receipt of packets from hosts previously
          blacklisted by a <command>drop</command>,
          <command>logdrop</command>, <command>reject</command>, or
          <command>logreject</command> command.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">call <replaceable>function</replaceable> [
        <replaceable>parameter</replaceable> ... ]</emphasis></term>

        <listitem>
          <para>Added in Shorewall 4.6.10. Allows you to call a function in
          one of the Shorewall libraries or in your compiled script. function
          must name the shell function to be called. The listed parameters are
          passed to the function.</para>

          <para>The function is first searched for in
          <filename>lib.base</filename>, <filename>lib.common</filename> and
          <filename>lib.cli</filename>. If it is not found, the call command
          is passed to the generated script to be executed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">clear </emphasis><emphasis role="bold">
        </emphasis>[-<option>f</option>]</term>

        <listitem>
          <para>Clear will remove all rules and chains installed by
          shorewall6-lite. The firewall is then wide open and unprotected.
          Existing connections are untouched. Clear is often used to see if
          the firewall is causing connection problems.</para>

          <para>If <option>-f</option> is given, the command will be processed
          by the compiled script that executed the last successful
          <command>start</command>, <command>reload</command>, <emphasis
          role="bold">restart</emphasis> or <command>refresh</command> command
          if that script exists.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">close</emphasis> {
        <replaceable>open-number</replaceable> |
        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
        ] ] }</term>

        <listitem>
          <para>Added in Shorewall 4.5.8. This command closes a temporary open
          created by the <command>open</command> command. In the first form,
          an <replaceable>open-number</replaceable> specifies the open to be
          closed. Open numbers are displayed in the <emphasis
          role="bold">num</emphasis> column of the output of the
          <command>shorewall6-lite show opens </command>command.</para>

          <para>When the second form of the command is used, the parameters
          must match those given in the earlier <command>open</command>
          command.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">delete </emphasis>{
        <replaceable>interface</replaceable>[:<replaceable>host-list</replaceable>]...
        <replaceable>zone</replaceable> | <replaceable>zone</replaceable>
        <replaceable>host-list</replaceable> }</term>

        <listitem>
          <para>The delete command reverses the effect of an earlier
          <command>add</command> command.</para>

          <para>The <replaceable>interface</replaceable> argument names an
          interface defined in the <ulink
          url="shorewall-interfaces.html">shorewall-interfaces</ulink>(5)
          file. A <replaceable>host-list</replaceable> is comma-separated list
          whose elements are a host or network address.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">disable </emphasis>{
        <replaceable>interface</replaceable> |
        <replaceable>provider</replaceable> }</term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Disables the optional provider
          associated with the specified <replaceable>interface</replaceable>
          or <replaceable>provider</replaceable>. Where more than one provider
          share a single network interface, a
          <replaceable>provider</replaceable> name must be given.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">drop
        </emphasis><replaceable>address</replaceable></term>

        <listitem>
          <para>Causes traffic from the listed
          <replaceable>address</replaceable>es to be silently dropped.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">dump </emphasis>[-<option>x</option>]
        [-<option>l</option>] [-<option>m</option>]
        [-<option>c</option>]</term>

        <listitem>
          <para>Produces a verbose report about the firewall configuration for
          the purpose of problem analysis.</para>

          <para>The <option>-x</option> option causes actual packet and byte
          counts to be displayed. Without that option, these counts are
          abbreviated.</para>

          <para>The <option>-m</option> option causes any MAC addresses
          included in shorewall6-lite log messages to be displayed.</para>

          <para>The <option>-l</option> option causes the rule number for each
          Netfilter rule to be displayed.</para>

          <para>The <option>-c</option> option causes the route cache to be
          dumped in addition to the other routing information.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">enable </emphasis>{
        <replaceable>interface</replaceable> |
        <replaceable>provider</replaceable> }</term>

        <listitem>
          <para>Added in Shorewall 4.4.26. Enables the optional provider
          associated with the specified <replaceable>interface</replaceable>
          or <replaceable>provider</replaceable>. Where more than one provider
          share a single network interface, a
          <replaceable>provider</replaceable> name must be given.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">forget </emphasis>[
        <replaceable>filename</replaceable> ]</term>

        <listitem>
          <para>Deletes
          <filename>/var/lib/shorewall6-lite/<replaceable>filename</replaceable></filename>
          and <filename>/var/lib/shorewall6-lite/save</filename>. If no
          <replaceable>filename</replaceable> is given then the file specified
          by RESTOREFILE in <ulink
          url="shorewall.conf.html">shorewall6.conf</ulink>(5) is
          assumed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">help</emphasis></term>

        <listitem>
          <para>Displays a syntax summary.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">hits</emphasis></term>

        <listitem>
          <para>Generates several reports from shorewall6-lite log messages in
          the current log file. If the <option>-t</option> option is included,
          the reports are restricted to log messages generated today.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">iptrace </emphasis><replaceable>ip6tables
        match expression</replaceable></term>

        <listitem>
          <para>This is a low-level debugging command that causes iptables
          TRACE log records to be created. See iptables(8) for details.</para>

          <para>The <replaceable>iptables match expression</replaceable> must
          be one or more matches that may appear in both the raw table OUTPUT
          and raw table PREROUTING chains.</para>

          <para>The trace records are written to the kernel's log buffer with
          facility = kernel and priority = warning, and they are routed from
          there by your logging daemon (syslogd, rsyslog, syslog-ng, ...) --
          shorewall6-lite has no control over where the messages go; consult
          your logging daemon's documentation.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">list</emphasis></term>

        <listitem>
          <para><command>list</command> is a synonym for
          <command>show</command> -- please see below.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">logdrop
        </emphasis><replaceable>address</replaceable></term>

        <listitem>
          <para>Causes traffic from the listed
          <replaceable>address</replaceable>es to be logged then discarded.
          Logging occurs at the log level specified by the BLACKLIST_LOGLEVEL
          setting in <ulink url="shorewall.conf.html">shorewall6.conf</ulink>
          (5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">logwatch </emphasis>[-<option>m</option>]
        [<replaceable>refresh-interval</replaceable>]</term>

        <listitem>
          <para>Monitors the log file specified by the LOGFILE option in
          <ulink url="shorewall.conf.html">shorewall6.conf</ulink>(5) and
          produces an audible alarm when new shorewall6-lite messages are
          logged.</para>

          <para>The <option>-m</option> option causes the MAC address of each
          packet source to be displayed if that information is
          available.</para>

          <para>The <replaceable>refresh-interval</replaceable> specifies the
          time in seconds between screen refreshes. You can enter a negative
          number by preceding the number with "--" (e.g.,
          <command>shorewall6-lite logwatch -- -30</command>). In this case,
          when a packet count changes, you will be prompted to hit any key to
          resume screen refreshes.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">logreject
        </emphasis><replaceable>address</replaceable></term>

        <listitem>
          <para>Causes traffic from the listed
          <replaceable>address</replaceable>es to be logged then rejected.
          Logging occurs at the log level specified by the BLACKLIST_LOGLEVEL
          setting in <ulink url="shorewall.conf.html">shorewall6.conf</ulink>
          (5).</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ls</emphasis></term>

        <listitem>
          <para><command>ls</command> is a synonym for <command>show</command>
          -- please see below.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">noiptrace
        </emphasis><replaceable>ip6tables match
        expression</replaceable></term>

        <listitem>
          <para>This is a low-level debugging command that cancels a trace
          started by a preceding <command>iptrace</command> command.</para>

          <para>The <replaceable>ip6tables match expression</replaceable> must
          be one given in the <command>iptrace</command> command being
          canceled.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">open</emphasis>
        <replaceable>source</replaceable> <replaceable>dest</replaceable> [
        <replaceable>protocol</replaceable> [ <replaceable>port</replaceable>
        ] ]</term>

        <listitem>
          <para>Added in Shorewall 4.6.8. This command requires that the
          firewall be in the started state and that DYNAMIC_BLACKLIST=Yes in
          <ulink url="/manpages6/shorewall6.conf.html">shorewall6.conf
          (5)</ulink>. The effect of the command is to temporarily open the
          firewall for connections matching the parameters.</para>

          <para>The <replaceable>source</replaceable> and
          <replaceable>dest</replaceable> parameters may each be specified as
          <emphasis role="bold">all</emphasis> if you don't wish to restrict
          the connection source or destination respectively. Otherwise, each
          must contain a host or network address or a valid DNS name.</para>

          <para>The <replaceable>protocol</replaceable> may be specified
          either as a number or as a name listed in /etc/protocols. The
          <replaceable>port</replaceable> may be specified numerically or as a
          name listed in /etc/services.</para>

          <para>To reverse the effect of a successful <command>open</command>
          command, use the <command>close</command> command with the same
          parameters or simply restart the firewall.</para>

          <para>Example: To open the firewall for SSH connections to address
          2001:470:b:227::1, the command would be:</para>

          <programlisting>    shorewall6-lite open all 2001:470:b:227::1 tcp 22</programlisting>

          <para>To reverse that command, use:</para>

          <programlisting>    shorewall6-lite close all 2001:470:b:227::1 tcp 22</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">reenable</emphasis>{
        <replaceable>interface</replaceable> |
        <replaceable>provider</replaceable> }</term>

        <listitem>
          <para>Added in Shorewall 4.6.9. This is equivalent to a
          <command>disable</command> command followed by an
          <command>enable</command> command on the specified
          <replaceable>interface</replaceable> or
          <replaceable>provider</replaceable>.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">reject</emphasis><replaceable>
        address</replaceable></term>

        <listitem>
          <para>Causes traffic from the listed <emphasis>address</emphasis>es
          to be silently rejected.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">reload </emphasis>[-n] [-p]
        [-<option>C</option>]</term>

        <listitem>
          <para>Added in Shorewall 5.0.0, <emphasis
          role="bold">reload</emphasis> is similar to <command>shorewall6-lite
          start</command> except that it assumes that the firewall is already
          started. Existing connections are maintained.</para>

          <para>The <option>-n</option> option causes shorewall6-lite to avoid
          updating the routing table(s).</para>

          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>

          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
          If the specified (or implicit) firewall script is the one that
          generated the current running configuration, then the running
          netfilter configuration will be reloaded as is so as to preserve the
          iptables packet and byte counters.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">reset [<replaceable>chain</replaceable>,
        ...]</emphasis><acronym/></term>

        <listitem>
          <para>Resets the packet and byte counters in the specified
          <replaceable>chain</replaceable>(s). If no
          <replaceable>chain</replaceable> is specified, all the packet and
          byte counters in the firewall are reset.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">restart </emphasis>[-n] [-p]
        [-<option>C</option>]</term>

        <listitem>
          <para>Beginning with Shorewall 5.0.0, this command performs a true
          restart. The firewall is completely stopped as if a
          <command>stop</command> command had been issued then it is started
          again.</para>

          <para>The <option>-n</option> option causes shorewall6-lite to avoid
          updating the routing table(s).</para>

          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>

          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
          If the specified (or implicit) firewall script is the one that
          generated the current running configuration, then the running
          netfilter configuration will be reloaded as is so as to preserve the
          iptables packet and byte counters.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">restore </emphasis>[-<option>n</option>]
        [-<option>p</option>] [-<option>C</option>] [
        <replaceable>filename</replaceable> ]</term>

        <listitem>
          <para>Restore shorewall6-lite to a state saved using the
          <command>shorewall6-lite save</command> command. Existing
          connections are maintained. The <replaceable>filename</replaceable>
          names a restore file in <filename
          class="directory">/var/lib/shorewall6-lite</filename> created using
          <command>shorewall6-lite save</command>; if no
          <replaceable>filename</replaceable> is given then shorewall6-lite
          will be restored from the file specified by the RESTOREFILE option
          in <ulink
          url="shorewall.conf.html">shorewall6.conf</ulink>(5).</para>

          <caution>
            <para>If your ip6tables ruleset depends on variables that are
            detected at run-time, either in your params file or by
            Shorewall-generated code, <command>restore</command> will use the
            values that were current when the ruleset was saved, which may be
            different from the current values.</para>
          </caution>

          <para>The <option>-C</option> option was added in Shorewall 4.6.5.
          If the <option>-C</option> option was specified during
          <command>shorewall7-lite save</command>, then the counters saved by
          that operation will be restored.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">run
        </emphasis><replaceable>command</replaceable> [
        <replaceable>parameter</replaceable> ... ]</term>

        <listitem>
          <para>Added in Shorewall 4.6.3. Executes
          <replaceable>command</replaceable> in the context of the generated
          script passing the supplied <replaceable>parameter</replaceable>s.
          Normally, the <replaceable>command</replaceable> will be a function
          declared in <filename>lib.private</filename>.</para>

          <para>Before executing the command, the script will detect the
          configuration, setting all SW_* variables and will run your
          <filename>init</filename> extension script with $COMMAND =
          'run'.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">save </emphasis>[-<option>C</option>] [
        <replaceable>filename</replaceable> ]</term>

        <listitem>
          <para>The dynamic blacklist is stored in
          <filename>/var/lib/shorewall6-lite/save</filename>. The state of the
          firewall is stored in
          <filename>/var/lib/shorewall6-lite/<replaceable>filename</replaceable></filename>
          for use by the <command>shorewall6-lite restore</command> command.
          If <replaceable>filename</replaceable> is not given then the state
          is saved in the file specified by the RESTOREFILE option in <ulink
          url="shorewall.conf.html">shorewall6.conf</ulink>(5).</para>

          <para>The <option>-C</option> option, added in Shorewall 4.6.5,
          causes the ip6tables packet and byte counters to be saved along with
          the chains and rules.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">savesets</emphasis></term>

        <listitem>
          <para>Added in shorewall 4.6.8. Performs the same action as the
          <command>stop</command> command with respect to saving ipsets (see
          the SAVE_IPSETS option in <ulink
          url="/manpages6/shorewall6.conf.html">shorewall6.conf</ulink> (5)).
          This command may be used to proactively save your ipset contents in
          the event that a system failure occurs prior to issuing a
          <command>stop</command> command.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">show</emphasis></term>

        <listitem>
          <para>The show command can have a number of different
          arguments:</para>

          <variablelist>
            <varlistentry>
              <term>[-<option>x</option>] <emphasis
              role="bold">bl|blacklists</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.6.2. Displays the dynamic chain
                along with any chains produced by entries in
                shorewall6-blrules(5).The <option>-x</option> option is passed
                directly through to ip6tables and causes actual packet and
                byte counts to be displayed. Without this option, those counts
                are abbreviated.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>f</option>] <emphasis
              role="bold">capabilities</emphasis></term>

              <listitem>
                <para>Displays your kernel/iptables capabilities. The
                <option>-f</option> option causes the display to be formatted
                as a capabilities file for use with <command>compile
                -e</command>.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>b</option>] [-<option>x</option>]
              [-<option>l</option>] [-<option>t</option>
              {<option>filter</option>|<option>mangle</option>|<option>nat</option>|<option>raw</option>|<option>rawpost</option>}][
              <emphasis>chain</emphasis>... ]</term>

              <listitem>
                <para>The rules in each <emphasis>chain</emphasis> are
                displayed using the <emphasis role="bold">iptables
                -L</emphasis> <emphasis>chain</emphasis> <emphasis
                role="bold">-n -v</emphasis> command. If no
                <emphasis>chain</emphasis> is given, all of the chains in the
                filter table are displayed.</para>

                <para>The <option>-x</option> option is passed directly
                through to iptables and causes actual packet and byte counts
                to be displayed. Without this option, those counts are
                abbreviated.</para>

                <para>The <option>-t</option> option specifies the Netfilter
                table to display. The default is <emphasis
                role="bold">filter</emphasis>.</para>

                <para>The <option>-b</option> ('brief') option causes rules
                which have not been used (i.e. which have zero packet and byte
                counts) to be omitted from the output. Chains with no rules
                displayed are also omitted from the output.</para>

                <para>The <option>-l</option> option causes the rule number
                for each Netfilter rule to be displayed.</para>

                <para>If the <option>-t</option> option and the
                <option>chain</option> keyword are both omitted and any of the
                listed <replaceable>chain</replaceable>s do not exist, a usage
                message is displayed.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">classifiers|filters</emphasis></term>

              <listitem>
                <para>Displays information about the packet classifiers
                defined on the system as a result of traffic shaping
                configuration.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">config</emphasis></term>

              <listitem>
                <para>Displays distribution-specific defaults.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">connections
              [<replaceable>filter_parameter</replaceable>
              ...]</emphasis></term>

              <listitem>
                <para>Displays the IP connections currently being tracked by
                the firewall.</para>

                <para>If the <command>conntrack</command> utility is
                installed, beginning with Shorewall 4.6.11 the set of
                connections displayed can be limited by including conntrack
                filter parameters (-p , -s, --dport, etc). See conntrack(8)
                for details.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">event</emphasis><replaceable>
              event</replaceable></term>

              <listitem>
                <para>Added in Shorewall 4.5.19. Displays the named
                event.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">events</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.5.19. Displays all events.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">ip</emphasis></term>

              <listitem>
                <para>Displays the system's IPv4 configuration.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">ipa</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.4.17. Displays the per-IP
                accounting counters (<ulink
                url="manpages/shorewall-accounting.html">shorewall-accounting</ulink>
                (5)).</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>m</option>] <emphasis
              role="bold">log</emphasis></term>

              <listitem>
                <para>Displays the last 20 shorewall6-lite messages from the
                log file specified by the LOGFILE option in <ulink
                url="shorewall.conf.html">shorewall6.conf</ulink>(5).</para>

                <para>The <option>-m</option> option causes the MAC address of
                each packet source to be displayed if that information is
                available.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>x</option>] <emphasis
              role="bold">mangle</emphasis></term>

              <listitem>
                <para>Displays the Netfilter mangle table using the command
                <command>ip6tables -t mangle -L -n -v</command>.The
                <option>-x</option> option is passed directly through to
                ip6tables and causes actual packet and byte counts to be
                displayed. Without this option, those counts are
                abbreviated.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">marks</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.4.26. Displays the various fields
                in packet marks giving the min and max value (in both decimal
                and hex) and the applicable mask (in hex).</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">opens</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.5.8. Displays the iptables rules in
                the 'dynamic' chain created through use of the <command>open
                </command>command..</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>x</option>] <emphasis
              role="bold">nat</emphasis></term>

              <listitem>
                <para>Displays the Netfilter nat table using the command
                <command>ip6tables -t nat -L -n -v</command>.The
                <option>-x</option> option is passed directly through to
                iptables and causes actual packet and byte counts to be
                displayed. Without this option, those counts are
                abbreviated.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">policies</emphasis></term>

              <listitem>
                <para>Added in Shorewall 4.4.4. Displays the applicable policy
                between each pair of zones. Note that implicit intrazone
                ACCEPT policies are not displayed for zones associated with a
                single network where that network doesn't specify
                <option>routeback</option>.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>x</option>] <emphasis
              role="bold">raw</emphasis></term>

              <listitem>
                <para>Displays the Netfilter raw table using the command
                <command>iptables -t raw -L -n -v</command>.The
                <option>-x</option> option is passed directly through to
                iptables and causes actual packet and byte counts to be
                displayed. Without this option, those counts are
                abbreviated.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term>[-<option>c</option>]<emphasis role="bold">
              </emphasis><emphasis role="bold">routing</emphasis></term>

              <listitem>
                <para>Displays the system's IPv4 routing configuration. The -c
                option causes the route cache to be displayed in addition to
                the other routing information.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">tc</emphasis></term>

              <listitem>
                <para>Displays information about queuing disciplines, classes
                and filters.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">zones</emphasis></term>

              <listitem>
                <para>Displays the current composition of the Shorewall zones
                on the system.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">start </emphasis>[-<option>p</option>]
        [-<option>n</option>] [<option>-f</option>]
        [-<option>C</option>]</term>

        <listitem>
          <para>Start Shorewall6 Lite. Existing connections through
          shorewall6-lite managed interfaces are untouched. New connections
          will be allowed only if they are allowed by the firewall rules or
          policies.</para>

          <para>The <option>-p</option> option causes the connection tracking
          table to be flushed; the <command>conntrack</command> utility must
          be installed to use this option.</para>

          <para>The <option>-n</option> option prevents the firewall script
          from modifying the current routing configuration.</para>

          <para>The <option>-f</option> option was added in Shorewall 4.6.5.
          If the RESTOREFILE named in <ulink
          url="shorewall.conf.html">shorewall.conf</ulink>(5) exists, is
          executable and is not older than the current filewall script, then
          that saved configuration is restored.</para>

          <para>The <option>-C</option> option was added in Shorewall 4.6.5
          and is only meaningful when the <option>-f</option> option is also
          specified. If the previously-saved configuration is restored, and if
          the <option>-C</option> option was also specified in the
          <command>save</command> command, then the packet and byte counters
          will be restored.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">stop </emphasis><emphasis role="bold">
        </emphasis>[-<option>f</option>]</term>

        <listitem>
          <para>Stops the firewall. All existing connections, except those
          listed in <ulink
          url="shorewall-routestopped.html">shorewall-routestopped</ulink>(5)
          or permitted by the ADMINISABSENTMINDED option in <ulink
          url="shorewall.conf.html">shorewall6.conf</ulink>(5), are taken
          down. The only new traffic permitted through the firewall is from
          systems listed in <ulink
          url="shorewall-routestopped.html">shorewall-routestopped</ulink>(5)
          or by ADMINISABSENTMINDED.</para>

          <para>If <option>-f</option> is given, the command will be processed
          by the compiled script that executed the last successful
          <command>start</command>, <command>restart</command> or
          <command>refresh</command> command if that script exists.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">status</emphasis></term>

        <listitem>
          <para>Produces a short report about the state of the
          Shorewall-configured firewall.</para>

          <para>The <option>-i</option> option was added in Shorewall 4.6.2
          and causes the status of each optional or provider interface to be
          displayed.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">version
        </emphasis>[-<option>a</option>]</term>

        <listitem>
          <para>Displays Shorewall's version. The <option>-a</option> option
          is included for compatibility with earlier Shorewall releases and is
          ignored.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>EXIT STATUS</title>

    <para>In general, when a command succeeds, status 0 is returned; when the
    command fails, a non-zero status is returned.</para>

    <para>The <command>status</command> command returns exit status as
    follows:</para>

    <para>0 - Firewall is started.</para>

    <para>3 - Firewall is stopped or cleared</para>

    <para>4 - Unknown state; usually means that the firewall has never been
    started.</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://www.shorewall.net/starting_and_stopping_shorewall.htm">http://www.shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>

    <para>shorewall6-accounting(5), shorewall6-actions(5),
    shorewall6-blacklist(5), shorewall6-hosts(5), shorewall_interfaces(5),
    shorewall6-ipsets(5), shorewall6-maclist(5), shorewall6-masq(5),
    shorewall6-netmap(5), shorewall6-params(5), shorewall6-policy(5),
    shorewall6-providers(5), shorewall6-proxyarp(5), shorewall6-rtrules(5),
    shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5),
    shorewall6-secmarks(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5),
    shorewall6-tcrules(5), shorewall6-tos(5), shorewall6-tunnels(5),
    shorewall6-zones(5)</para>
  </refsect1>
</refentry>