shorewall_code/Shorewall/manpages/shorewall-tunnels.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall-tunnels</refentrytitle>

    <manvolnum>5</manvolnum>

    <refmiscinfo>Configuration Files</refmiscinfo>
  </refmeta>

  <refnamediv>
    <refname>tunnels</refname>

    <refpurpose>Shorewall VPN definition file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall[6]/tunnels</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The tunnels file is used to define rules for encapsulated (usually
    encrypted) traffic to pass between the Shorewall system and a remote
    gateway. Traffic flowing through the tunnel is handled using the normal
    zone/policy/rule mechanism. See <ulink
    url="/VPNBasics.html">http://www.shorewall.net/VPNBasics.html</ulink> for
    details.</para>

    <para>The columns in the file are as follows.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">TYPE</emphasis> - {<emphasis
        role="bold">ipsec</emphasis>[<emphasis
        role="bold">:{noah</emphasis>|ah}]|<emphasis
        role="bold">ipsecnat</emphasis>|<emphasis
        role="bold">ipip</emphasis>|<emphasis
        role="bold">gre</emphasis>|l2tp|<emphasis
        role="bold">pptpclient</emphasis>|<emphasis
        role="bold">pptpserver</emphasis>|?COMMENT|{<emphasis
        role="bold">openvpn</emphasis>|<emphasis
        role="bold">openvpnclient</emphasis>|<emphasis
        role="bold">openvpnserver</emphasis>}[:{<emphasis
        role="bold">tcp</emphasis>|<emphasis
        role="bold">udp</emphasis>}]<emphasis
        role="bold">[</emphasis>:<emphasis>port</emphasis>]|<emphasis
        role="bold">generic</emphasis><emphasis
        role="bold">:</emphasis><emphasis>protocol</emphasis>[<emphasis
        role="bold">:</emphasis><emphasis>port</emphasis>]}</term>

        <listitem>
          <para>Types are as follows:</para>

          <programlisting>        <emphasis role="bold">6to4</emphasis> or <emphasis
              role="bold">6in4</emphasis>  - 6to4 or 6in4 tunnel. The <emphasis
              role="bold">6in4</emphasis> synonym was added in 4.4.24.
        <emphasis role="bold">ipsec</emphasis>         - IPv4 IPSEC
        <emphasis role="bold">ipsecnat</emphasis>      - IPv4 IPSEC with NAT Traversal (UDP port 4500 encapsulation)
        <emphasis role="bold">ipip</emphasis>          - IPv4 encapsulated in IPv4 (Protocol 4)
        <emphasis role="bold">gre</emphasis>           - Generalized Routing Encapsulation (Protocol 47)
        <emphasis role="bold">l2tp</emphasis>          - Layer 2 Tunneling Protocol (UDP port 1701)
        <emphasis role="bold">pptpclient</emphasis>    - PPTP Client runs on the firewall
        <emphasis role="bold">pptpserver</emphasis>    - PPTP Server runs on the firewall
        <emphasis role="bold">openvpn</emphasis>       - OpenVPN in point-to-point mode
        <emphasis role="bold">openvpnclient</emphasis> - OpenVPN client runs on the firewall
        <emphasis role="bold">openvpnserver</emphasis> - OpenVPN server runs on the firewall
        <emphasis role="bold">generic</emphasis>       - Other tunnel type
        <emphasis role="bold">tinc</emphasis>          - TINC (added in Shorewall 4.6.6)</programlisting>

          <para>If the type is <emphasis role="bold">ipsec</emphasis>, it may
          be followed by <emphasis role="bold">:ah</emphasis> to indicate that
          the Authentication Headers protocol (51) is used by the tunnel (the
          default is <option>:noah</option> which means that protocol 51 is
          not used). NAT traversal is only supported with ESP (protocol 50) so
          <emphasis role="bold">ipsecnat</emphasis> tunnels don't allow the
          <emphasis role="bold">ah</emphasis> option (<emphasis
          role="bold">ipsecnat:noah</emphasis> may be specified but is
          redundant).</para>

          <para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
          role="bold">openvpnclient</emphasis> or <emphasis
          role="bold">openvpnserver</emphasis> it may optionally be followed
          by ":" and <emphasis role="bold">tcp</emphasis> or <emphasis
          role="bold">udp</emphasis> to specify the protocol to be used. If
          not specified, <emphasis role="bold">udp</emphasis> is
          assumed.</para>

          <para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
          role="bold">openvpnclient</emphasis> or <emphasis
          role="bold">openvpnserver</emphasis> it may optionally be followed
          by ":" and the port number used by the tunnel. if no ":" and port
          number are included, then the default port of 1194 will be used. .
          Where both the protocol and port are specified, the protocol must be
          given first (e.g., openvpn:tcp:4444).</para>

          <para>If type is <emphasis role="bold">generic</emphasis>, it must
          be followed by ":" and a protocol name (from /etc/protocols) or a
          protocol number. If the protocol is <emphasis
          role="bold">tcp</emphasis> or <emphasis role="bold">udp</emphasis>
          (6 or 17), then it may optionally be followed by ":" and a port
          number.</para>

          <para>Comments may be attached to Netfilter rules generated from
          entries in this file through the use of /COMMENT lines. These lines
          begin with ?COMMENT; the remainder of the line is treated as a
          comment which is attached to subsequent rules until another ?COMMENT
          line is found or until the end of the file is reached. To stop
          adding comments to rules, use a line containing only
          ?COMMENT.</para>

          <note>
            <para>Beginning with Shorewall 4.5.11, ?COMMENT is a synonym for
            COMMENT and is preferred.</para>
          </note>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">ZONE</emphasis> -
        <emphasis>zone</emphasis></term>

        <listitem>
          <para>The <emphasis>zone</emphasis> of the physical interface
          through which tunnel traffic passes. This is normally your internet
          zone.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">GATEWAY</emphasis>(S) (gateway or
        gateways) - <emphasis>address-or-range</emphasis> <emphasis
        role="bold">[ , ... ]</emphasis></term>

        <listitem>
          <para>The IP address of the remote tunnel gateway. If the remote
          gateway has no fixed address (Road Warrior) then specify the gateway
          as <emphasis role="bold">0.0.0.0/0</emphasis>. May be specified as a
          network address and if your kernel and iptables include iprange
          match support then IP address ranges are also allowed.</para>

          <para>Beginning with Shorewall 4.5.3, a list of addresses or ranges
          may be given. Exclusion (<ulink
          url="/manpages/shorewall-exclusion.html">shorewall-exclusion</ulink>
          (5) ) is not supported.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">GATEWAY ZONES</emphasis> (gateway_zone or
        gateway_zones) - [<emphasis>zone</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>zone</emphasis>]...]</term>

        <listitem>
          <para>Optional. If the gateway system specified in the third column
          is a standalone host then this column should contain a
          comma-separated list of the names of the zones that the host might
          be in. This column only applies to IPSEC tunnels where it enables
          ISAKMP traffic to flow through the tunnel to the remote
          gateway(s).</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Example</title>

    <variablelist>
      <varlistentry>
        <term>IPv4 Example 1:</term>

        <listitem>
          <para>IPSec tunnel.</para>

          <para>The remote gateway is 4.33.99.124 and the remote subnet is
          192.168.9.0/24. The tunnel does not use the AH protocol</para>

          <programlisting>        #TYPE           ZONE    GATEWAY
        ipsec:noah      net     4.33.99.124</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 2:</term>

        <listitem>
          <para>Road Warrior (LapTop that may connect from anywhere) where the
          "gw" zone is used to represent the remote LapTop</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        ipsec           net     0.0.0.0/0       gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 3:</term>

        <listitem>
          <para>Host 4.33.99.124 is a standalone system connected via an ipsec
          tunnel to the firewall system. The host is in zone gw.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        ipsec           net     4.33.99.124     gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 4:</term>

        <listitem>
          <para>Road Warriors that may belong to zones vpn1, vpn2 or vpn3. The
          FreeS/Wan _updown script will add the host to the appropriate zone
          using the <command>shorewall add</command> command on connect and
          will remove the host from the zone at disconnect time.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        ipsec           net     0.0.0.0/0       vpn1,vpn2,vpn3</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 5:</term>

        <listitem>
          <para>You run the Linux PPTP client on your firewall and connect to
          server 192.0.2.221.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        pptpclient      net     192.0.2.221</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 6:</term>

        <listitem>
          <para>You run a PPTP server on your firewall.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        pptpserver      net     0.0.0.0/0</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>Example 7:</term>

        <listitem>
          <para>OPENVPN tunnel. The remote gateway is 4.33.99.124 and openvpn
          uses port 7777.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY         GATEWAY ZONES
        openvpn:7777    net     4.33.99.124</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 8:</term>

        <listitem>
          <para>You have a tunnel that is not one of the supported types. Your
          tunnel uses UDP port 4444. The other end of the tunnel is
          4.3.99.124.</para>

          <programlisting>        #TYPE            ZONE    GATEWAY         GATEWAY ZONES
        generic:udp:4444 net     4.3.99.124</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv4 Example 9:</term>

        <listitem>
          <para>TINC tunnel where the remote gateways are not specified. If
          you wish to specify a list of gateways, you can do so in the GATEWAY
          column.</para>

          <programlisting>        #TYPE            ZONE    GATEWAY          GATEWAY ZONES
        tinc             net     0.0.0.0/0</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv6 Example 1:</term>

        <listitem>
          <para>IPSec tunnel.</para>

          <para>The remote gateway is 2001:cec792b4:1::44. The tunnel does not
          use the AH protocol</para>

          <programlisting>        #TYPE           ZONE    GATEWAY
        ipsec:noah      net     2002:cec792b4:1::44</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv6 Example 2:</term>

        <listitem>
          <para>Road Warrior (LapTop that may connect from anywhere) where the
          "gw" zone is used to represent the remote LapTop</para>

          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
        ipsec           net     ::/0                    gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv6 Example 3:</term>

        <listitem>
          <para>Host 2001:cec792b4:1::44 is a standalone system connected via
          an ipsec tunnel to the firewall system. The host is in zone
          gw.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
        ipsec           net     2001:cec792b4:1::44     gw</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv6 Example 4:</term>

        <listitem>
          <para>OPENVPN tunnel. The remote gateway is 2001:cec792b4:1::44 and
          openvpn uses port 7777.</para>

          <programlisting>        #TYPE           ZONE    GATEWAY                 GATEWAY ZONES
        openvpn:7777    net     2001:cec792b4:1::44</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv6 Example 8:</term>

        <listitem>
          <para>You have a tunnel that is not one of the supported types. Your
          tunnel uses UDP port 4444. The other end of the tunnel is
          2001:cec792b4:1::44.</para>

          <programlisting>        #TYPE            ZONE    GATEWAY                GATEWAY ZONES
        generic:udp:4444 net     2001:cec792b4:1::44</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>IPv6 Example 9:</term>

        <listitem>
          <para>TINC tunnel where the remote gateways are not specified. If
          you wish to specify a list of gateways, you can do so in the GATEWAY
          column.</para>

          <programlisting>        #TYPE            ZONE    GATEWAY          GATEWAY ZONES
        tinc             net     ::/0</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/tunnels</para>

    <para>/etc/shorewall6/tunnels</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
    shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
    shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
    shorewall-tcdevices(5), shorewall-mangle(5), shorewall-tos(5),
    shorewall-zones(5)</para>
  </refsect1>
</refentry>