shorewall_code/Shorewall/manpages/shorewall-notrack.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
  <refmeta>
    <refentrytitle>shorewall6-notrack</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>notrack</refname>

    <refpurpose>shorewall notrack file</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/notrack</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>The original intent of the notrack file was to exempt certain
    traffic from Netfilter connection tracking. Traffic matching entries in
    this file were not to be tracked.</para>

    <para>The role of the file was expanded in Shorewall 4.4.27 to include all
    rules tht can be added in the Netfilter <emphasis
    role="bold">raw</emphasis> table.</para>

    <para>The file supports two different column layouts: FORMAT 1 and FORMAT
    2, FORMAT 1 being the default. The two differ in that FORMAT 2 has an
    additional leading ACTION column. When an entry in the file of this form
    is encountered, the format of the following entries are assumed to be of
    the specified <replaceable>format</replaceable>.</para>

    <simplelist>
      <member><emphasis role="bold">FORMAT</emphasis>
      <replaceable>format</replaceable></member>
    </simplelist>

    <para>where <replaceable>format</replaceable> is either <emphasis
    role="bold">1</emphasis> or <emphasis role="bold">2</emphasis>.</para>

    <para>The columns in the file are as follows (where the column name is
    followed by a different name in parentheses, the different name is used in
    the alternate specification syntax).</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">ACTION</emphasis> - {<emphasis
        role="bold">NOTRACK</emphasis>|<emphasis
        role="bold">CT</emphasis>:<replaceable>option</replaceable>[:<replaceable>arg,...</replaceable>]}</term>

        <listitem>
          <para>This column is only present when FORMAT = 2. Values other than
          NOTRACK require <firstterm>CT Target </firstterm>support in your
          iptables and kernel.</para>

          <para>Possible values for <replaceable>option</replaceable> and
          <replaceable>arg</replaceable>s are:</para>

          <itemizedlist>
            <listitem>
              <para><option>notrack</option> (no
              <replaceable>arg</replaceable>)</para>

              <para>Disables connection tracking for this packet, the same as
              if NOTRACK has been specified in this column.</para>
            </listitem>

            <listitem>
              <para><option>helper</option>:<replaceable>name</replaceable></para>

              <para>Use the helper identified by the name to this connection.
              This is more flexible than loading the conntrack helper with
              preset ports.</para>
            </listitem>

            <listitem>
              <para><option>ctevents</option>:<replaceable>event</replaceable>,...</para>

              <para>Only generate the specified conntrack events for this
              connection. Possible event types are: <emphasis
              role="bold">new</emphasis>, <emphasis
              role="bold">related</emphasis>, <emphasis
              role="bold">destroy</emphasis>, <emphasis
              role="bold">reply</emphasis>, <emphasis
              role="bold">assured</emphasis>, <emphasis
              role="bold">protoinfo</emphasis>, <emphasis
              role="bold">helper</emphasis>, <emphasis
              role="bold">mark</emphasis> (this is connection mark, not packet
              mark), <emphasis role="bold">natseqinfo</emphasis>, and
              <emphasis role="bold">secmark</emphasis>.</para>
            </listitem>

            <listitem>
              <para><option>expevents</option><option>:new</option></para>

              <para>Only generate a new expectation events for this
              connection.</para>
            </listitem>

            <listitem>
              <para><option>zone</option>:<replaceable>id</replaceable></para>

              <para>Assign this packet to zone <replaceable>id</replaceable>
              and only have lookups done in that zone. By default, packets
              have zone 0.</para>
            </listitem>
          </itemizedlist>

          <para>When FORMAT = 1, this column is not present and the rule is
          processed as if NOTRACK had been entered in this column.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>SOURCE ‒
        {<emphasis>zone</emphasis>[:<emphasis>interface</emphasis>][:<emphasis>address-list</emphasis>]|COMMENT}</term>

        <listitem>
          <para>where <replaceable>zone</replaceable> is the name of a zone,
          <replaceable>interface</replaceable> is an interface to that zone,
          and <replaceable>address-list</replaceable> is a comma-separated
          list of addresses (may contain exclusion - see <ulink
          url="shorewall-exclusion.html">shorewall-exclusion</ulink>
          (5)).</para>

          <para>Comments may be attached to Netfilter rules generated from
          entries in this file through the use of COMMENT lines. These lines
          begin with the word COMMENT; the remainder of the line is treated as
          a comment which is attached to subsequent rules until another
          COMMENT line is found or until the end of the file is reached. To
          stop adding comments to rules, use a line with only the word
          COMMENT.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>DEST ‒
        [<replaceable>interface</replaceable>|<replaceable>address-list</replaceable>]</term>

        <listitem>
          <para>where <replaceable>interface</replaceable> is the name of a
          network interface and <replaceable>address-list</replaceable> is a
          comma-separated list of addresses (may contain exclusion - see
          <ulink url="shorewall-exclusion.html">shorewall-exclusion</ulink>
          (5)). If an interface is given:</para>

          <itemizedlist>
            <listitem>
              <para>It must be up and configured with an IPv4 address when
              Shorewall is started or restarted.</para>
            </listitem>

            <listitem>
              <para>All routes out of the interface must be configured when
              Shorewall is started or restarted.</para>
            </listitem>

            <listitem>
              <para>Default routes out of the interface will result in a
              warning message and will be ignored.</para>
            </listitem>
          </itemizedlist>

          <para>These restrictions are because Netfilter doesn't support
          NOTRACK rules that specify a destination interface (these rules are
          applied before packets are routed and hence the destination
          interface is unknown). Shorewall uses the routes out of the
          interface to replace the interface with an address list
          corresponding to the networks routed out of the named
          interface.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>PROTO ‒
        <replaceable>protocol-name-or-number</replaceable></term>

        <listitem>
          <para>A protocol name from <filename>/etc/protocols</filename> or a
          protocol number.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>DEST PORT(S) (dport) - port-number/service-name-list</term>

        <listitem>
          <para>A comma-separated list of port numbers and/or service names
          from <filename>/etc/services</filename>. May also include port
          ranges of the form
          <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
          if your kernel and iptables include port range support.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>SOURCE PORT(S) (sport) - port-number/service-name-list</term>

        <listitem>
          <para>A comma-separated list of port numbers and/or service names
          from <filename>/etc/services</filename>. May also include port
          ranges of the form
          <replaceable>low-port</replaceable>:<replaceable>high-port</replaceable>
          if your kernel and iptables include port range support.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term>USER/GROUP (user) ‒
        [<replaceable>user</replaceable>][:<replaceable>group</replaceable>]</term>

        <listitem>
          <para>May only be specified if the SOURCE
          <replaceable>zone</replaceable> is $FW. Specifies the effective user
          id and or group id of the process sending the traffic.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/notrack</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://shorewall.net/configuration_file_basics.htm#Pairs">http://shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
    shorewall-ipsets(5), shorewall-masq(5), shorewall-nat(5),
    shorewall-netmap(5), shorewall-params(5), shorewall-policy(5),
    shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5),
    shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
    shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
    shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5),
    shorewall-zones(5)</para>
  </refsect1>
</refentry>