shorewall_code/docs/CompiledPrograms.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
  <!--$Id$-->

  <articleinfo>
    <title>Compiled Firewall Programs and Shorewall Lite</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate>2006-06-14</pubdate>

    <copyright>
      <year>2006</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>
  </articleinfo>

  <section>
    <title>Overview</title>

    <para>Beginning with Shorewall version 3.1, Shorewall has the capability
    to compile a Shorewall configuration and produce a runnable firewall
    program script. The script is a complete program which can be placed on a
    system with <emphasis>Shorewall Lite</emphasis> installed and can serve as
    the firewall creation script for that system.</para>

    <section>
      <title>Restrictions</title>

      <para>While compiled Shorewall programs are useful in many cases, there
      are some important restrictions that you should be aware of before
      attempting to use them.</para>

      <orderedlist>
        <listitem>
          <para>The <emphasis role="bold">detectnets</emphasis> interface
          option is not supported.</para>
        </listitem>

        <listitem>
          <para>DYNAMIC_ZONES=Yes in <filename>shorewall.conf</filename> is
          not supported.</para>
        </listitem>

        <listitem>
          <para>All extension scripts used are copied into the program. The
          ramifications of this are:</para>

          <itemizedlist>
            <listitem>
              <para>If you update an extension script, the compiled program
              will not use the updated script.</para>
            </listitem>

            <listitem>
              <para>The <filename>/etc/shorewall/params</filename> extension
              script is executed at compile time as well as at run
              time.</para>

              <para>Running the script at compile time allows variable
              expansion (expanding $variable to it's defined value) of
              variables used in Shorewall configuration files to occur at
              compile time. Running it at run-time allows your extension
              scripts to use the variables that it creates. BUT -- for any
              given variable, the value at compile time may be different from
              the value at run-time unless you only assign constant
              values.</para>

              <para>For example, if you have:</para>

              <programlisting>EXT_IP=$(fiind_first_interface_address eth0)</programlisting>

              <para>in <filename>/etc/shorewall/params</filename> then all
              occurrences of $EXT_IP in Shorewall configuration files will be
              replaced with eth0's IP address when the program is being
              compiled. On the other hand, if you use $EXT_IP in your
              /etc/shorewall/start script, the value will be the IP address of
              eth0 when the program is run.</para>

              <para>Bottom line: You probably want to use only constant values
              for variables set in
              <filename>/etc/shorewall/params</filename>.</para>
            </listitem>
          </itemizedlist>
        </listitem>

        <listitem>
          <para>You must install Shorewall Lite on the system where you want
          to run the script. You then install the compiled program in
          /usr/share/shorewall/firewall and use the /sbin/shorewall program
          included with Shorewall Lite to control the firewall just as if the
          full Shorewall distribution was installed.</para>
        </listitem>
      </orderedlist>
    </section>
  </section>

  <section>
    <title>The "shorewall compile" command</title>

    <para>A compiled script is produced using the <command>compile</command>
    command:</para>

    <blockquote>
      <para><command>shorewall compile [ -e ] [ &lt;directory name&gt; ]
      &lt;path name&gt;</command></para>
    </blockquote>

    <para>where</para>

    <blockquote>
      <variablelist>
        <varlistentry>
          <term>-e</term>

          <listitem>
            <para>Indicates that the program is to be "exported" to another
            system. When this flag is set, the "detectnets" interface is not
            allowed but the created program may be run on a system that has
            only Shorewall Lite installed</para>

            <para>When this flag is given, Shorewall does not probe the
            current system to determine the kernel/iptables features that it
            supports. It rather reads those capabilities from
            <filename>/etc/shorewall/capabilities</filename>. See below for
            details.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>&lt;directory name&gt;</term>

          <listitem>
            <para>specifies a directory to be searched for configuration files
            before those directories listed in the CONFIG_PATH variable in
            <filename>shorewall.conf</filename>.</para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>&lt;path name&gt;</term>

          <listitem>
            <para>specifies the name of the script to be created.</para>
          </listitem>
        </varlistentry>
      </variablelist>
    </blockquote>
  </section>

  <section id="Lite">
    <title>Shorewall Lite (Added in version 3.2.0 RC 1)</title>

    <para>Shorewall Lite is a companion product to Shorewall and is designed
    to allow you to maintain all Shorewall configuration information on a
    single system within your network.</para>

    <orderedlist numeration="loweralpha">
      <listitem>
        <para>You install the full Shorewall release on one system within your
        network. You need not configure Shorewall there and you may totally
        disable startup of Shorewall in your init scripts. For ease of
        reference, we call this system the 'administrative system'.</para>
      </listitem>

      <listitem>
        <para>On each system where you wish to run a Shorewall-generated
        firewall, you install Shorewall Lite. For ease of reference, we will
        call these systems the 'firewall systems'.</para>

        <note>
          <para>The firewall systems do <emphasis role="bold">NOT</emphasis>
          need to have the full Shorewall product installed but rather only
          the Shorewall Lite product. Shorewall and Shorewall LIte may be
          installed on the same system but that isn't encouraged.</para>
        </note>
      </listitem>

      <listitem>
        <para>On the administrative system you create a separete
        'configuration directory' for each firewall system. You copy the
        contents of /usr/share/shorewall/configfiles into each configuration
        directory.</para>
      </listitem>

      <listitem>
        <para>On each firewall system, you run:</para>

        <programlisting><command>/usr/share/shorewall-lite/shorecap &gt; capabilities</command>
<command>scp capabilities &lt;admin system&gt;:&lt;this system's config dir&gt;</command></programlisting>
      </listitem>

      <listitem>
        <para>On the administrative system, for each firewall system you do
        the following (this may be done by a non-root user):</para>

        <orderedlist>
          <listitem>
            <para>modify the files in the corresponding configuration
            directory appropriately. It's a good idea to include the IP
            address of the administrative system in the
            <filename>routestopped</filename> file.</para>

            <para>It is important to understand that with Shorewall Lite, the
            firewall's configuration directory on the administrative system
            acts as <filename class="directory">/etc/shorewall</filename> for
            that firewall. So when the Shorewall documentation gives
            instructions for placing entries in files in the firewall's
            <filename class="directory">/etc/shorewall</filename>, when using
            Shorewall Lite you make those changes in the firewall's
            configuration directory on the administrative system.</para>
          </listitem>

          <listitem>
            <programlisting><command>cd &lt;configuration directory&gt;</command>
<command>/sbin/shorewall compile -e . firewall</command>
<command>scp firewall root@&lt;firewall system&gt;:/usr/share/shorewall-lite/</command></programlisting>
          </listitem>
        </orderedlist>
      </listitem>

      <listitem>
        <para>On each firewall system:</para>

        <para>Modify <filename>/etc/shorewall-lite/shorewall.conf</filename>
        as needed.</para>

        <para>If you are running Debian or one of its derivatives like Ubuntu
        then edit /etc/default/shorewall-lite and set startup=1.</para>

        <programlisting><command>shorewall-lite start</command></programlisting>
      </listitem>
    </orderedlist>

    <para>Shorewall Lite includes a very limited version of
    <filename>shorewall.conf
    </filename>(<filename>/etc/shorewall-lite/shorewall.conf</filename>). It
    includes the following options which have the same meaning as in a full
    Shorewall installation except as noted below:</para>

    <blockquote>
      <simplelist>
        <member>VERBOSITY</member>

        <member>LOGFILE</member>

        <member>LOGFORMAT — used by <filename>/sbin/shorewall</filename> for
        finding 'Shorewall' log messages. If LOGFORMAT was specified in the
        shorewall.conf file used at compile time on the administrative system,
        then the format of the messages themselves is defined by that value.
        If LOGFORMAT was not specified at compile time then the firewall
        script will use the value from
        <filename>/etc/shorewall-lite/shorewall.conf</filename> on the
        firewall system.</member>

        <member>IPTABLES — determines the iptables binary to be used by
        <filename>/sbin/shorewall</filename>. The compiled firewall script
        will use the IPTABLES specified in <filename>shorewall.conf</filename>
        at compile time on the administrative system, if any; if IPTABLES was
        not specified at compile time then the IPTABLES value from
        <filename>/etc/shorewall-lite/shorewall.conf</filename> on the
        firewall system will be used by the firewall script.</member>

        <member>PATH</member>

        <member>SHOREWALL_SHELL</member>

        <member>SUBSYSLOCK</member>

        <member>RESTOREFILE</member>
      </simplelist>
    </blockquote>

    <para>The <filename>/sbin/shorewall-lite</filename> program included with
    Shorewall Lite supports the same set of commands as the
    <filename>/sbin/shorewall</filename> program in a full Shorewall
    installation with the following exceptions:</para>

    <blockquote>
      <simplelist>
        <member>add</member>

        <member>compile</member>

        <member>delete</member>

        <member>refresh</member>

        <member>try</member>

        <member>safe-start</member>

        <member>safe-restart</member>

        <member>show actions</member>

        <member>show macros</member>
      </simplelist>
    </blockquote>

    <para>On systems with only Shorewall Lite installed, I recommend that you
    create a symbolic link <filename>/sbin/shorewall</filename> and point it
    at <filename>/sbin/shorewall-lite</filename>. That way, you can use
    <command>shorewall</command> as the command regardless of which product is
    installed.</para>

    <blockquote>
      <programlisting><command>ln -sf shorewall-lite /sbin/shorewall</command></programlisting>
    </blockquote>

    <section>
      <title>Converting a system from Shorewall to Shorewall Lite</title>

      <para>Converting a firewall system that is currently running Shorewall
      to run Shorewall Lite instead is straight-forward.</para>

      <orderedlist>
        <listitem>
          <para>On the administrative system, create a configuration directory
          for the firewall system.</para>
        </listitem>

        <listitem>
          <para>Copy the contents of <filename
          class="directory">/etc/shorewall/</filename> from the firewall
          system to the configuration directory on the administrative
          system.</para>
        </listitem>

        <listitem>
          <para>On the firewall system:</para>

          <para>Be sure that the IP address of the administrative system is
          included in <filename>/etc/shorewall/routestopped</filename>.</para>

          <programlisting><command>shorewall stop</command></programlisting>

          <para><emphasis role="bold">We recommend that you uninstall
          Shorewall at this point.</emphasis></para>
        </listitem>

        <listitem>
          <para>Install Shorewall Lite on the firewall system.</para>
        </listitem>

        <listitem>
          <para>On the firewall system:</para>

          <programlisting><command>/usr/share/shorewall-lite/shorecap &gt; capabilities</command>
<command>scp capabilities &lt;admin system&gt;:&lt;this system's config dir&gt;</command></programlisting>
        </listitem>

        <listitem>
          <para>On the administrative system:</para>

          <para>It's a good idea to include the IP address of the
          administrative system in the firewall system's
          <filename>routestopped</filename> file.</para>

          <programlisting><command>cd &lt;configuration directory&gt;</command>
<command>/sbin/shorewall compile -e . firewall</command>
<command>scp firewall root@&lt;firewall system&gt;:/usr/share/shorewall-lite/</command></programlisting>
        </listitem>

        <listitem>
          <para>On the firewall system:</para>

          <para>Modify <filename>/etc/shorewall-lite/shorewall.conf</filename>
          as needed.</para>

          <para>If you are running Debian or one of its derivatives like
          Ubuntu then edit /etc/default/shorewall-lite and set
          startup=1.</para>

          <programlisting><command>shorewall-lite start</command></programlisting>
        </listitem>
      </orderedlist>
    </section>

    <section>
      <title>A simple shell program for remote firewall replacement</title>

      <para>I use the following <ulink
      url="ftp://ftp1.shorewall.net/pub/shorewall/contrib/compile">simple
      shell program</ulink> for compiling firewall scripts and installing them
      on firewall systems:</para>

      <blockquote>
        <programlisting>#/bin/bash

[ $# -eq 1 ] || { echo "Usage: $(basename $0) &lt;system&gt;" &gt;&amp;2; exit 2; }

/sbin/shorewall compile -e . firewall &amp;&amp; scp firewall root@${1}:/usr/share/shorewall-lite/ &amp;&amp; ssh root@${1} 'shorewall-lite restart'</programlisting>
      </blockquote>

      <para>I install this program in
      <filename>/usr/local/bin/compile</filename> and I have my configuration
      directories in ~/Config. So, for example, to recompile the firewall
      script for the 'gateway' system and install the script on gateway, I do
      the following:</para>

      <blockquote>
        <programlisting>teastep@wookie:~$ <command>cd Configs/gateway</command>
teastep@wookie:~/Configs/gateway$ <command>compile gateway</command>
Compiling...
Shorewall configuration compiled to firewall
firewall                                                                                                                  100%   29KB  29.3KB/s   00:00
Restarting Shorewall Lite....
done.
teastep@wookie:~/Configs/gateway$</programlisting>
      </blockquote>

      <para>I use RSA keys and ssh-agent so I don't need to enter a password
      to run scp or ssh.</para>
    </section>
  </section>

  <section>
    <title>The /etc/shorewall/capabilities file and the shorecap
    program</title>

    <para>As mentioned above, the /etc/shorewall/capabilities file specifies
    that kernel/iptables capabilities of the target system. Here is a sample
    file:</para>

    <blockquote>
      <programlisting>NAT_ENABLED=Yes                 # NAT
MANGLE_ENABLED=Yes              # Packet Mangling
MULTIPORT=Yes                   # Multi-port Match
XMULTIPORT=Yes                  # Extended Multi-port Match
CONNTRACK_MATCH=Yes             # Connection Tracking Match
USEPKTTYPE=                     # Packet Type Match
POLICY_MATCH=Yes                # Policy Match
PHYSDEV_MATCH=Yes               # Physdev Match
LENGTH_MATCH=Yes                # Packet Length Match
IPRANGE_MATCH=Yes               # IP range Match
RECENT_MATCH=Yes                # Recent Match
OWNER_MATCH=Yes                 # Owner match
IPSET_MATCH=                    # Ipset Match
CONNMARK=Yes                    # CONNMARK Target
XCONNMARK=Yes                   # Extended CONNMARK Target
CONNMARK_MATCH=Yes              # Connmark Match
XCONNMARK_MATCH=Yes             # Extended Connmark Match
RAW_TABLE=Yes                   # Raw Table
IPP2P_MATCH=                    # IPP2P Match
CLASSIFY_TARGET=Yes             # CLASSIFY Target
ENHANCED_REJECT=Yes             # Extended REJECT
KLUDGEFREE=                     # iptables accepts multiple "-m iprange" or "-m physdev" in a single command
MARK=Yes                        # MARK Target Support
XMARK=YES                       # Extended MARK Target Support
MANGLE_FORWARD                  # Mangle table has FORWARD chain</programlisting>
    </blockquote>

    <para>As you can see, the file contains a simple list of shell variable
    assignments -- the variables correspond to the capabilities listed by the
    <command>shorewall show capabilities</command> command and they appear in
    the same order as the output of that command.</para>

    <para>To aid in creating this file, Shorewall Lite includes a
    <command>shorecap</command> program. The program is installed in the
    <filename>/usr/share/shorewall-lite/</filename> directory and may be run
    as follows:</para>

    <blockquote>
      <para><command>[ IPTABLES=&lt;iptables binary&gt; ] [
      MODULESDIR=&lt;kernel modules directory&gt; ]
      /usr/share/shorewall-lite/shorecap &gt; capabilities</command></para>
    </blockquote>

    <para>The IPTABLES and MODULESDIR options have their <ulink
    url="Documentation.htm#Conf">usual Shorewall default
    values</ulink>.</para>

    <para>The <filename>capabilities</filename> file may then be copied to a
    system with Shorewall installed and used when compiling firewall programs
    to run on the remote system.</para>
  </section>

  <section>
    <title>Running compiled programs directly</title>

    <para>Compiled firewall programs are complete programs that support the
    following run-line commands:</para>

    <blockquote>
      <simplelist>
        <member><command>&lt;program&gt; [ -q ] [ -v ] [ -n ]
        start</command></member>

        <member><command>&lt;program&gt; [ -q ] [ -v ] [ -n ]
        stop</command></member>

        <member><command>&lt;program&gt; [ -q ] [ -v ] [ -n ]
        clear</command></member>

        <member><command>&lt;program&gt; [ -q ] [ -v ] [ -n ]
        restart</command></member>

        <member><command>&lt;program&gt; [ -q ] [ -v ] [ -n ]
        status</command></member>

        <member><command>&lt;program&gt; [ -q ] [ -v ] [ -n ]
        version</command></member>
      </simplelist>
    </blockquote>

    <para>The options have their same meaning is when they are passed to
    <filename>/sbin/shorewall</filename> itself. The default VERBOSITY level
    is the level specified in the shorewall.conf file used when then program
    was compiled.</para>
  </section>
</article>