fixed quotes, add CVS Id

git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@991 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb

Shorewall-docs/User_defined_Actions.xml

@@ -2,7 +2,7 @@
 <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
 <article>
-  <!---->
+  <!--$Id$-->
 
   <articleinfo>
     <title>User-defined Actions</title>
@@ -56,8 +56,8 @@
     <listitem>
       <para>Once you have defined your new action name (ActionName), then copy
       /etc/shorewall/action.template to /etc/shorewall/action.ActionName (for
-      example, if your new action name is &#34;Foo&#34; then copy
+      example, if your new action name is <quote>Foo</quote> then copy
-      /etc/shorewall/action.template to /etc/shorewall/action.foo). </para>
+      /etc/shorewall/action.template to /etc/shorewall/action.foo).</para>
     </listitem>
 
     <listitem>
@@ -71,24 +71,24 @@
     <listitem>
       <para>TARGET - Must be ACCEPT, DROP, REJECT, LOG, QUEUE or
       &#60;action&#62; where &#60;action&#62; is a previously-defined action.
-      The TARGET may optionally be followed by a colon (&#34;:&#34;) and a
+      The TARGET may optionally be followed by a colon (<quote>:</quote>) and
-      syslog log level (e.g, REJECT:info or ACCEPT:debugging). This causes the
+      a syslog log level (e.g, REJECT:info or ACCEPT:debugging). This causes
-      packet to be logged at the specified level. You may also specify ULOG
+      the packet to be logged at the specified level. You may also specify
-      (must be in upper case) as a log level.This will log to the ULOG target
+      ULOG (must be in upper case) as a log level.This will log to the ULOG
-      for routing to a separate log through use of ulogd
+      target for routing to a separate log through use of ulogd
       (http://www.gnumonks.org/projects/ulogd).</para>
     </listitem>
 
     <listitem>
       <para>SOURCE - Source hosts to which the rule applies. A comma-separated
       list of subnets and/or hosts. Hosts may be specified by IP or MAC
-      address; mac addresses must begin with &#34;~&#34; and must use
+      address; mac addresses must begin with <quote>~</quote> and must use
-      &#34;-&#34; as a separator.</para>
+      <quote>-</quote> as a separator.</para>
 
       <para>Alternatively, clients may be specified by interface name. For
       example, eth1 specifies a client that communicates with the firewall
-      system through eth1. This may be optionally followed by another colon
+      system through eth1. This may be optionally followed by another colon (<quote>:</quote>)
-      (&#34;:&#34;) and an IP/MAC/subnet address as described above (e.g.,
+      and an IP/MAC/subnet address as described above (e.g.,
       eth1:192.168.1.5).</para>
     </listitem>
 
@@ -97,19 +97,18 @@
       MAC addresses are not allowed.</para>
 
       <para>Unlike in the SOURCE column, you may specify a range of up to 256
-      IP addresses using the syntax &#60;first ip&#62;-&#60;last ip&#62;.
+      IP addresses using the syntax &#60;first ip&#62;-&#60;last ip&#62;.</para>
-      </para>
     </listitem>
 
     <listitem>
-      <para>PROTO - Protocol - Must be &#34;tcp&#34;, &#34;udp&#34;,
+      <para>PROTO - Protocol - Must be <quote>tcp</quote>, <quote>udp</quote>,
-      &#34;icmp&#34;, a number, or &#34;all&#34;.</para>
+      <quote>icmp</quote>, a number, or <quote>all</quote>.</para>
     </listitem>
 
     <listitem>
       <para>DEST PORT(S) - Destination Ports. A comma-separated list of Port
       names (from /etc/services), port numbers or port ranges; if the protocol
-      is &#34;icmp&#34;, this column is interpreted as the destination
+      is <quote>icmp</quote>, this column is interpreted as the destination
       icmp-type(s).</para>
 
       <para>A port range is expressed as &#60;low port&#62;:&#60;high
@@ -117,7 +116,7 @@
 
       <para>This column is ignored if PROTOCOL = all but must be entered if
       any of the following ields are supplied. In that case, it is suggested
-      that this field contain &#34;-&#34;.</para>
+      that this field contain <quote>-</quote>.</para>
 
       <para>If your kernel contains multi-port match support, then only a
       single Netfilter rule will be generated if in this list and the CLIENT
@@ -141,10 +140,10 @@
       this column:</para>
 
       <para><programlisting>     &#60;rate&#62;/&#60;interval&#62;[:&#60;burst&#62;]</programlisting>where
-      &#60;rate&#62; is the number of connections per &#60;interval&#62;
+      &#60;rate&#62; is the number of connections per &#60;interval&#62; (<quote>sec</quote>
-      (&#34;sec&#34; or &#34;min&#34;) and &#60;burst&#62; is the largest
+      or <quote>min</quote>) and &#60;burst&#62; is the largest burst
-      burst permitted. If no &#60;burst&#62; is given, a value of 5 is
+      permitted. If no &#60;burst&#62; is given, a value of 5 is assumed.
-      assumed. There may be no whitespace embedded in the specification.</para>
+      There may be no whitespace embedded in the specification.</para>
 
       <para><programlisting>     Example: 10/sec:20</programlisting></para>
     </listitem>
@@ -157,6 +156,4 @@
   <para><programlisting>     LogAndAccept</programlisting><emphasis
   role="bold">/etc/shorewall/action.LogAndAccept</emphasis><programlisting>     LOG:info
      ACCEPT</programlisting></para>
-
-  <para> </para>
 </article>