Modularize NAT

git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@4454 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
This commit is contained in:
teastep 2006-08-27 19:42:06 +00:00
parent 6640720954
commit 44b8b78bf1
3 changed files with 558 additions and 784 deletions

View File

@ -641,262 +641,6 @@ disable_critical_hosts()
done
}
#
# Set up ipsec tunnels
#
setup_tunnels() # $1 = name of tunnels file
{
local inchain
local outchain
local source
local dest
setup_one_ipsec() # $1 = Tunnel Kind $2 = gateway zones
{
local kind=$1 noah=
case $kind in
*:*)
noah=${kind#*:}
[ $noah = noah -o $noah = NOAH ] || fatal_error "Invalid IPSEC modifier $noah in tunnel \"$tunnel\""
kind=${kind%:*}
;;
esac
[ $kind = IPSEC ] && kind=ipsec
options="-m state --state NEW -j ACCEPT"
addrule2 $inchain -p 50 $source -j ACCEPT
addrule2 $outchain -p 50 $dest -j ACCEPT
if [ -z "$noah" ]; then
run_iptables -A $inchain -p 51 $source -j ACCEPT
run_iptables -A $outchain -p 51 $dest -j ACCEPT
fi
run_iptables -A $outchain -p udp $dest --dport 500 $options
if [ $kind = ipsec ]; then
run_iptables -A $inchain -p udp $source --dport 500 $options
else
run_iptables -A $inchain -p udp $source --dport 500 $options
run_iptables -A $inchain -p udp $source --dport 4500 $options
fi
for z in $(separate_list $2); do
if validate_zone $z; then
if [ -z "$POLICY_MATCH" ]; then
addrule ${z}2${FW} -p 50 $source -j ACCEPT
addrule ${FW}2${z} -p 50 $dest -j ACCEPT
if [ -z "$noah" ]; then
addrule ${z}2${FW} -p 51 $source -j ACCEPT
addrule ${FW}2${z} -p 51 $dest -j ACCEPT
fi
fi
if [ $kind = ipsec ]; then
addrule ${z}2${FW} -p udp $source --dport 500 $options
addrule ${FW}2${z} -p udp $dest --dport 500 $options
else
addrule ${z}2${FW} -p udp $source --dport 500 $options
addrule ${FW}2${z} -p udp $dest --dport 500 $options
addrule ${z}2${FW} -p udp $source --dport 4500 $options
addrule ${FW}2${z} -p udp $dest --dport 4500 $options
fi
else
fatal_error "Invalid gateway zone ($z) -- Tunnel \"$tunnel\""
fi
done
progress_message_and_save " IPSEC tunnel to $gateway defined."
}
setup_one_other() # $1 = TYPE, $2 = protocol
{
addrule2 $inchain -p $2 $source -j ACCEPT
addrule2 $outchain -p $2 $dest -j ACCEPT
progress_message_and_save " $1 tunnel to $gateway compiled."
}
setup_pptp_client()
{
addrule2 $outchain -p 47 $dest -j ACCEPT
addrule2 $inchain -p 47 $source -j ACCEPT
addrule2 $outchain -p tcp --dport 1723 $dest -j ACCEPT
progress_message_and_save " PPTP tunnel to $gateway defined."
}
setup_pptp_server()
{
addrule2 $inchain -p 47 $source -j ACCEPT
addrule2 $outchain -p 47 $dest -j ACCEPT
addrule2 $inchain -p tcp --dport 1723 $source -j ACCEPT
progress_message_and_save " PPTP server defined."
}
setup_one_openvpn() # $1 = kind[:port]
{
local protocol=udp
local p=1194
case $1 in
*:*:*)
protocol=${1%:*}
protocol=${protocol#*:}
p=${1##*:}
;;
*:tcp|*:udp|*:TCP|*:UDP)
protocol=${1#*:}
;;
*:*)
p=${1#*:}
;;
esac
addrule2 $inchain -p $protocol $source --dport $p -j ACCEPT
addrule2 $outchain -p $protocol $dest --dport $p -j ACCEPT
progress_message_and_save " OPENVPN tunnel to $gateway:$protocol:$p defined."
}
setup_one_openvpn_server() # $1 = kind[:port]
{
local protocol=udp
local p=1194
case $1 in
*:*:*)
protocol=${1%:*}
protocol=${protocol#*:}
p=${1##*:}
;;
*:tcp|*:udp|*:TCP|*:UDP)
protocol=${1#*:}
;;
*:*)
p=${1#*:}
;;
esac
addrule2 $inchain -p $protocol $source --dport $p -j ACCEPT
addrule2 $outchain -p $protocol $dest --sport $p -j ACCEPT
progress_message_and_save " OPENVPN server tunnel from $gateway:$protocol:$p defined."
}
setup_one_openvpn_client() # $1 = kind[:port]
{
local protocol=udp
local p=1194
case $1 in
*:*:*)
protocol=${1%:*}
protocol=${protocol#*:}
p=${1##*:}
;;
*:tcp|*:udp|*:TCP|*:UDP)
protocol=${1#*:}
;;
*:*)
p=${1#*:}
;;
esac
addrule2 $inchain -p $protocol $source --sport $p -j ACCEPT
addrule2 $outchain -p $protocol $dest --dport $p -j ACCEPT
progress_message_and_save " OPENVPN client tunnel to $gateway:$protocol:$p defined."
}
setup_one_generic() # $1 = kind:protocol[:port]
{
local protocol
local p=
case $1 in
*:*:*)
p=${1##*:}
protocol=${1%:*}
protocol=${protocol#*:}
;;
*:*)
protocol=${1#*:}
;;
*)
protocol=udp
p=5000
;;
esac
p=${p:+--dport $p}
addrule2 $inchain -p $protocol $source $p -j ACCEPT
addrule2 $outchain -p $protocol $dest $p -j ACCEPT
progress_message_and_save " GENERIC tunnel to $1:$p defined."
}
strip_file tunnels $1
while read kind z gateway z1; do
expandv kind z gateway z1
tunnel="$(echo $kind $z $gateway $z1)"
if validate_zone $z; then
inchain=${z}2${FW}
outchain=${FW}2${z}
gateway=${gateway:-0.0.0.0/0}
source=$(source_ip_range $gateway)
dest=$(dest_ip_range $gateway)
case $kind in
ipsec|IPSEC|ipsec:*|IPSEC:*)
setup_one_ipsec $kind $z1
;;
ipsecnat|IPSECNAT|ipsecnat:*|IPSECNAT:*)
setup_one_ipsec $kind $z1
;;
ipip|IPIP)
setup_one_other IPIP 4
;;
gre|GRE)
setup_one_other GRE 47
;;
6to4|6TO4)
setup_one_other 6to4 41
;;
pptpclient|PPTPCLIENT)
setup_pptp_client
;;
pptpserver|PPTPSERVER)
setup_pptp_server
;;
openvpn|OPENVPN|openvpn:*|OPENVPN:*)
setup_one_openvpn $kind
;;
openvpnclient|OPENVPNCLIENT|openvpnclient:*|OPENVPNCLIENT:*)
setup_one_openvpn_client $kind
;;
openvpnserver|OPENVPNSERVER|openvpnserver:*|OPENVPNSERVER:*)
setup_one_openvpn_server $kind
;;
generic:*|GENERIC:*)
setup_one_generic $kind
;;
*)
error_message "WARNING: Tunnels of type $kind are not supported:" \
"Tunnel \"$tunnel\" Ignored"
;;
esac
else
error_message "ERROR: Invalid gateway zone ($z)" \
" -- Tunnel \"$tunnel\" Ignored"
fi
done < $TMP_DIR/tunnels
}
#
# Setup Proxy ARP
#
@ -1290,84 +1034,6 @@ __EOF__
}
#
# Setup Static Network Address Translation (NAT)
#
setup_nat() {
local external= interface= internal= allints= localnat= policyin= policyout=
validate_one() #1 = Variable Name, $2 = Column name, $3 = value
{
case $3 in
Yes|yes)
;;
No|no)
eval ${1}=
;;
*)
[ -n "$3" ] && \
fatal_error "Invalid value ($3) for $2 in entry \"$external $interface $internal $allints $localnat\""
;;
esac
}
do_one_nat() {
local add_ip_aliases=$ADD_IP_ALIASES iface=${interface%:*}
if [ -n "$add_ip_aliases" ]; then
case $interface in
*:)
interface=${interface%:}
add_ip_aliases=
;;
*)
[ -n "$RETAIN_ALIASES" ] || save_command del_ip_addr $external $iface
;;
esac
else
interface=${interface%:}
fi
validate_one allints "ALL INTERFACES" $allints
validate_one localnat "LOCAL" $localnat
if [ -n "$allints" ]; then
addnatrule nat_in -d $external $policyin -j DNAT --to-destination $internal
addnatrule nat_out -s $internal $policyout -j SNAT --to-source $external
else
addnatrule $(input_chain $iface) -d $external $policyin -j DNAT --to-destination $internal
addnatrule $(output_chain $iface) -s $internal $policyout -j SNAT --to-source $external
fi
[ -n "$localnat" ] && \
run_iptables2 -t nat -A OUTPUT -d $external $policyout -j DNAT --to-destination $internal
if [ -n "$add_ip_aliases" ]; then
list_search $external $ALIASES_TO_ADD || \
ALIASES_TO_ADD="$ALIASES_TO_ADD $external $interface"
fi
}
#
# At this point, we're just interested in the network translation
#
> $STATEDIR/nat
if [ -n "$POLICY_MATCH" ]; then
policyin="-m policy --pol none --dir in"
policyout="-m policy --pol none --dir out"
fi
[ -n "$RETAIN_ALIASES" ] || save_progress_message "Setting up one-to-one NAT..."
while read external interface internal allints localnat; do
expandv external interface internal allints localnat
do_one_nat
progress_message_and_save " Host $internal NAT $external on $interface"
done < $TMP_DIR/nat
}
#
# Delete existing Static NAT
#
@ -1390,34 +1056,6 @@ fi
__EOF__
}
#
# Setup Network Mapping (NETMAP)
#
setup_netmap() {
while read type net1 interface net2 ; do
expandv type net1 interface net2
list_search $interface $ALL_INTERFACES || \
fatal_error "Unknown interface $interface in entry \"$type $net1 $interface $net2\""
case $type in
DNAT)
addnatrule $(input_chain $interface) -d $net1 -j NETMAP --to $net2
;;
SNAT)
addnatrule $(output_chain $interface) -s $net1 -j NETMAP --to $net2
;;
*)
fatal_error "Invalid type $type in entry \"$type $net1 $interface $net2\""
;;
esac
progress_message_and_save " Network $net1 on $interface mapped to $net2 ($type)"
done < $TMP_DIR/netmap
}
#
# Setup ECN disabling rules
#
@ -4541,420 +4179,6 @@ rules_chain() # $1 = source zone, $2 = destination zone
fi
}
#
# Set up Source NAT (including masquerading)
#
setup_masq()
{
do_ipsec_options() {
local options="$(separate_list $ipsec)" option
policy="-m policy --pol ipsec --dir out"
for option in $options; do
case $option in
[Yy]es) ;;
strict) policy="$policy --strict" ;;
next) policy="$policy --next" ;;
reqid=*) policy="$policy --reqid ${option#*=}" ;;
spi=*) policy="$policy --spi ${option#*=}" ;;
proto=*) policy="$policy --proto ${option#*=}" ;;
mode=*) policy="$policy --mode ${option#*=}" ;;
tunnel-src=*) policy="$policy --tunnel-src ${option#*=}" ;;
tunnel-dst=*) policy="$policy --tunnel-dst ${option#*=}" ;;
reqid!=*) policy="$policy ! --reqid ${option#*=}" ;;
spi!=*) policy="$policy ! --spi ${option#*=}" ;;
proto!=*) policy="$policy ! --proto ${option#*=}" ;;
mode!=*) policy="$policy ! --mode ${option#*=}" ;;
tunnel-src!=*) policy="$policy ! --tunnel-src ${option#*=}" ;;
tunnel-dst!=*) policy="$policy ! --tunnel-dst ${option#*=}" ;;
*) fatal_error "Invalid IPSEC option \"$option\"" ;;
esac
done
}
setup_one() {
local add_snat_aliases=$ADD_SNAT_ALIASES pre_nat= policy= destnets=
[ "x$ipsec" = x- ] && ipsec=
case $ipsec in
Yes|yes)
[ -n "$POLICY_MATCH" ] || \
fatal_error "IPSEC=Yes requires policy match support in your kernel and iptables"
policy="-m policy --pol ipsec --dir out"
;;
No|no)
[ -n "$POLICY_MATCH" ] || \
fatal_error "IPSEC=No requires policy match support in your kernel and iptables"
policy="-m policy --pol none --dir out"
;;
*)
if [ -n "$ipsec" ]; then
do_ipsec_options
elif [ -n "$POLICY_MATCH" ]; then
policy="-m policy --pol none --dir out"
fi
;;
esac
case $fullinterface in
+*)
pre_nat=Yes
fullinterface=${fullinterface#+}
;;
esac
case $fullinterface in
*::*)
add_snat_aliases=
destnets="${fullinterface##*:}"
fullinterface="${fullinterface%:*}"
;;
*:*:*)
# Both alias name and networks
destnets="${fullinterface##*:}"
fullinterface="${fullinterface%:*}"
;;
*:)
add_snat_aliases=
fullinterface=${fullinterface%:}
;;
*:*)
# Alias name OR networks
case ${fullinterface#*:} in
*.*)
# It's a networks
destnets="${fullinterface#*:}"
fullinterface="${fullinterface%:*}"
;;
*)
#it's an alias name
;;
esac
;;
*)
;;
esac
interface=${fullinterface%:*}
if ! list_search $interface $ALL_INTERFACES; then
fatal_error "Unknown interface $interface"
fi
if [ "$networks" = "${networks%!*}" ]; then
nomasq=
else
nomasq="${networks#*!}"
networks="${networks%!*}"
fi
source="${networks:=0.0.0.0/0}"
detectinterface=
case $source in
*.*.*|+*|!+*)
;;
*)
detectinterface=$networks
networks=
;;
esac
[ "x$proto" = x- ] && proto=
[ "x$ports" = x- ] && ports=
if [ -n "$proto" ]; then
displayproto="($proto)"
case $proto in
tcp|TCP|udp|UDP|6|17)
if [ -n "$ports" ]; then
displayproto="($proto $ports)"
listcount=$(list_count $ports)
if [ $listcount -gt 1 ]; then
case $ports in
*:*)
if [ -n "$XMULTIPORT" ]; then
if [ $(($listcount + $(list_count1 $(split $ports) ) )) -le 16 ]; then
ports="-m multiport --dports $ports"
else
fatal_error "More than 15 entries in port list ($ports)"
fi
else
fatal_error "Port Range not allowed in list ($ports)"
fi
;;
*)
if [ -n "$MULTIPORT" ]; then
[ $listcount -le 15 ] || fatal_error "More than 15 entries in port list ($ports)"
ports="-m multiport --dports $ports"
else
fatal_error "Port Ranges require multiport match support in your kernel ($ports)"
fi
;;
esac
else
ports="--dport $ports"
fi
fi
;;
*)
[ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
;;
esac
proto="-p $proto"
else
displayproto="(all)"
[ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
fi
destination=${destnets:=0.0.0.0/0}
[ -z "$pre_nat" ] && chain=$(masq_chain $interface) || chain=$(snat_chain $interface)
ensurenatchain $chain
case $destnets in
!*)
destnets=${destnets#!}
build_exclusion_chain newchain nat "$nomasq" "$destnets"
if [ -n "$networks" ]; then
for s in $networks; do
addnatrule $chain $(source_ip_range $s) $proto $ports $policy -j $newchain
done
networks=
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
run_iptables -t nat -A $chain -s \$network $proto $ports $policy -j $newchain
done
__EOF__
else
addnatrule $chain -j $newchain
fi
chain=$newchain
destnets=0.0.0.0/0
proto=
ports=
policy=
[ -n "$nomasq" ] && source="$source except $nomasq"
;;
*)
if [ -n "$nomasq" ]; then
build_exclusion_chain newchain nat $nomasq
if [ -n "$networks" ]; then
for s in $networks; do
for destnet in $(separate_list $destnets); do
addnatrule $chain $(both_ip_ranges $s $destnet) $proto $ports $policy -j $newchain
done
done
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
__EOF__
for destnet in $(separate_list $destnets); do
indent >&3 << __EOF__
run_iptables -t nat -A $chain -s \$network $(dest_ip_range $destnet) $proto $sports $policy -j $netchain
__EOF__
done
indent >&3 << __EOF__
done
__EOF__
else
for destnet in $(separate_list $destnets); do
addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $newchain
done
fi
chain=$newchain
networks=
destnets=0.0.0.0/0
proto=
ports=
policy=
source="$source except $nomasq"
fi
;;
esac
addrlist=
target=MASQUERADE
[ "x$addresses" = x- ] && addresses=
if [ -n "$addresses" ]; then
case "$addresses" in
SAME:nodst:*)
target="SAME --nodst"
addresses=${addresses#SAME:nodst:}
if [ "$addresses" = detect ]; then
addrlist='$addrlist'
else
for address in $(separate_list $addresses); do
addrlist="$addrlist --to $address";
done
fi
;;
SAME:*)
target="SAME"
addresses=${addresses#SAME:}
if [ "$addresses" = detect ]; then
addrlist='$addrlist'
else
for address in $(separate_list $addresses); do
addrlist="$addrlist --to $address";
done
fi
;;
detect)
target=SNAT
addrlist='$addrlist'
;;
*)
for address in $(separate_list $addresses); do
case $address in
*.*.*.*)
target=SNAT
addrlist="$addrlist --to-source $address"
;;
*)
addrlist="$addrlist --to-ports ${address#:}"
;;
esac
done
;;
esac
if [ "$addrlist" = '$addrlist' ]; then
addresses='$(combine_list $addresses)'
indent >&3 << __EOF__
addrlist=
addressses=\$(find_interface_addresses $interface)
if [ -n "\$addresses" ]; then
for address in \$addresses; do
addrlist="$addrlist --to-source $address"
done
else
fatal_error "Unable to determine the IP address(es) of $interface"
fi
__EOF__
elif [ -n "$add_snat_aliases" ]; then
for address in $(separate_list $addresses); do
address=${address%:)}
if [ -n "$address" ]; then
for addr in $(ip_range_explicit ${address%:*}) ; do
if ! list_search $addr $ALIASES_TO_ADD; then
[ -n "$RETAIN_ALIASES" ] || save_command del_ip_addr $addr $interface
ALIASES_TO_ADD="$ALIASES_TO_ADD $addr $fullinterface"
case $fullinterface in
*:*)
fullinterface=${fullinterface%:*}:$((${fullinterface#*:} + 1 ))
;;
esac
fi
done
fi
done
fi
fi
if [ -n "$networks" ]; then
for network in $networks; do
for destnet in $(separate_list $destnets); do
addnatrule $chain $(both_ip_ranges $network $destnet) $proto $ports $policy -j $target $addrlist
done
if [ -n "$addresses" ]; then
progress_message_and_save " To $destination $displayproto from $network through ${interface} using $addresses"
else
progress_message_and_save " To $destination $displayproto from $network through ${interface}"
fi
done
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
__EOF__
for destnet in $(separate_list $destnets); do
indent >&3 << __EOF__
run_iptables -t nat -A $chain -s \$network $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
__EOF__
done
if [ -n "$addresses" ]; then
message=" To $destination $displayproto from \$network through ${interface} using $addresses"
else
message=" To $destination $displayproto from \$network through ${interface}"
fi
indent >&3 << __EOF__
progress_message "$message"
done
__EOF__
else
for destnet in $(separate_list $destnets); do
addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
done
if [ -n "$addresses" ]; then
progress_message_and_save " To $destination $displayproto from $source through ${interface} using $addresses"
else
progress_message_and_save " To $destination $displayproto from $source through ${interface}"
fi
fi
}
strip_file masq $1
if [ -n "$NAT_ENABLED" ]; then
progress_message2 "$DOING Masquerading/SNAT"
save_progress_message "Setting up Masquerading/SNAT..."
fi
while read fullinterface networks addresses proto ports ipsec; do
expandv fullinterface networks addresses proto ports ipsec
if [ -n "$NAT_ENABLED" ]; then
setup_one
else
error_message "WARNING: NAT disabled; masq rule ignored"
fi
done < $TMP_DIR/masq
}
#
# Add a record to the blacklst chain
#
@ -5220,8 +4444,6 @@ initialize_netfilter () {
strip_file rules
strip_file proxyarp
strip_file maclist
strip_file nat
strip_file netmap
progress_message2 "Pre-processing Actions..."
process_actions1
@ -6841,8 +6063,18 @@ __EOF__
[ -n "$ROUTEMARK_INTERFACES" ] && setup_routes
fi
progress_message2 "$DOING NAT..."; setup_nat
progress_message2 "$DOING NETMAP..."; setup_netmap
if strip_file_and_lib_load nat nat; then
progress_message2 "$DOING NAT..."
setup_nat
else
> $STATEDIR/nat
fi
if strip_file_and_lib_load netmap nat; then
progress_message2 "$DOING NETMAP..."
setup_netmap
fi
progress_message2 "$DOING Common Rules"; add_common_rules
save_progress_message "Setting up SYN Flood Protection..."
@ -6864,8 +6096,8 @@ __EOF__
save_progress_message "Setting up Rules..."
process_rules
if strip_file_and_lib_load tunnels tunnels; then
tunnels=$(find_file tunnels)
if [ -f $tunnels ]; then
progress_message2 "$DOING $tunnels..."
save_progress_message "Setting up Tunnels..."
setup_tunnels $tunnels
@ -6880,8 +6112,8 @@ __EOF__
progress_message2 "$DOING $(find_file policy)..."; apply_policy_rules
if strip_file_and_lib_load masq nat; then
masq=$(find_file masq)
if [ -f $masq ]; then
setup_masq $masq
fi

540
Shorewall/lib.nat Normal file
View File

@ -0,0 +1,540 @@
#!/bin/sh
#
# Shorewall 3.2 -- /usr/share/shorewall/lib.nat
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# (c) 1999,2000,2001,2002,2003,2004,2005,2006 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
# Set up Source NAT (including masquerading)
#
setup_masq()
{
do_ipsec_options() {
local options="$(separate_list $ipsec)" option
policy="-m policy --pol ipsec --dir out"
for option in $options; do
case $option in
[Yy]es) ;;
strict) policy="$policy --strict" ;;
next) policy="$policy --next" ;;
reqid=*) policy="$policy --reqid ${option#*=}" ;;
spi=*) policy="$policy --spi ${option#*=}" ;;
proto=*) policy="$policy --proto ${option#*=}" ;;
mode=*) policy="$policy --mode ${option#*=}" ;;
tunnel-src=*) policy="$policy --tunnel-src ${option#*=}" ;;
tunnel-dst=*) policy="$policy --tunnel-dst ${option#*=}" ;;
reqid!=*) policy="$policy ! --reqid ${option#*=}" ;;
spi!=*) policy="$policy ! --spi ${option#*=}" ;;
proto!=*) policy="$policy ! --proto ${option#*=}" ;;
mode!=*) policy="$policy ! --mode ${option#*=}" ;;
tunnel-src!=*) policy="$policy ! --tunnel-src ${option#*=}" ;;
tunnel-dst!=*) policy="$policy ! --tunnel-dst ${option#*=}" ;;
*) fatal_error "Invalid IPSEC option \"$option\"" ;;
esac
done
}
setup_one() {
local add_snat_aliases=$ADD_SNAT_ALIASES pre_nat= policy= destnets=
[ "x$ipsec" = x- ] && ipsec=
case $ipsec in
Yes|yes)
[ -n "$POLICY_MATCH" ] || \
fatal_error "IPSEC=Yes requires policy match support in your kernel and iptables"
policy="-m policy --pol ipsec --dir out"
;;
No|no)
[ -n "$POLICY_MATCH" ] || \
fatal_error "IPSEC=No requires policy match support in your kernel and iptables"
policy="-m policy --pol none --dir out"
;;
*)
if [ -n "$ipsec" ]; then
do_ipsec_options
elif [ -n "$POLICY_MATCH" ]; then
policy="-m policy --pol none --dir out"
fi
;;
esac
case $fullinterface in
+*)
pre_nat=Yes
fullinterface=${fullinterface#+}
;;
esac
case $fullinterface in
*::*)
add_snat_aliases=
destnets="${fullinterface##*:}"
fullinterface="${fullinterface%:*}"
;;
*:*:*)
# Both alias name and networks
destnets="${fullinterface##*:}"
fullinterface="${fullinterface%:*}"
;;
*:)
add_snat_aliases=
fullinterface=${fullinterface%:}
;;
*:*)
# Alias name OR networks
case ${fullinterface#*:} in
*.*)
# It's a networks
destnets="${fullinterface#*:}"
fullinterface="${fullinterface%:*}"
;;
*)
#it's an alias name
;;
esac
;;
*)
;;
esac
interface=${fullinterface%:*}
if ! list_search $interface $ALL_INTERFACES; then
fatal_error "Unknown interface $interface"
fi
if [ "$networks" = "${networks%!*}" ]; then
nomasq=
else
nomasq="${networks#*!}"
networks="${networks%!*}"
fi
source="${networks:=0.0.0.0/0}"
detectinterface=
case $source in
*.*.*|+*|!+*)
;;
*)
detectinterface=$networks
networks=
;;
esac
[ "x$proto" = x- ] && proto=
[ "x$ports" = x- ] && ports=
if [ -n "$proto" ]; then
displayproto="($proto)"
case $proto in
tcp|TCP|udp|UDP|6|17)
if [ -n "$ports" ]; then
displayproto="($proto $ports)"
listcount=$(list_count $ports)
if [ $listcount -gt 1 ]; then
case $ports in
*:*)
if [ -n "$XMULTIPORT" ]; then
if [ $(($listcount + $(list_count1 $(split $ports) ) )) -le 16 ]; then
ports="-m multiport --dports $ports"
else
fatal_error "More than 15 entries in port list ($ports)"
fi
else
fatal_error "Port Range not allowed in list ($ports)"
fi
;;
*)
if [ -n "$MULTIPORT" ]; then
[ $listcount -le 15 ] || fatal_error "More than 15 entries in port list ($ports)"
ports="-m multiport --dports $ports"
else
fatal_error "Port Ranges require multiport match support in your kernel ($ports)"
fi
;;
esac
else
ports="--dport $ports"
fi
fi
;;
*)
[ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
;;
esac
proto="-p $proto"
else
displayproto="(all)"
[ -n "$ports" ] && fatal_error "Ports only allowed with UDP or TCP ($ports)"
fi
destination=${destnets:=0.0.0.0/0}
[ -z "$pre_nat" ] && chain=$(masq_chain $interface) || chain=$(snat_chain $interface)
ensurenatchain $chain
case $destnets in
!*)
destnets=${destnets#!}
build_exclusion_chain newchain nat "$nomasq" "$destnets"
if [ -n "$networks" ]; then
for s in $networks; do
addnatrule $chain $(source_ip_range $s) $proto $ports $policy -j $newchain
done
networks=
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
run_iptables -t nat -A $chain -s \$network $proto $ports $policy -j $newchain
done
__EOF__
else
addnatrule $chain -j $newchain
fi
chain=$newchain
destnets=0.0.0.0/0
proto=
ports=
policy=
[ -n "$nomasq" ] && source="$source except $nomasq"
;;
*)
if [ -n "$nomasq" ]; then
build_exclusion_chain newchain nat $nomasq
if [ -n "$networks" ]; then
for s in $networks; do
for destnet in $(separate_list $destnets); do
addnatrule $chain $(both_ip_ranges $s $destnet) $proto $ports $policy -j $newchain
done
done
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
__EOF__
for destnet in $(separate_list $destnets); do
indent >&3 << __EOF__
run_iptables -t nat -A $chain -s \$network $(dest_ip_range $destnet) $proto $sports $policy -j $netchain
__EOF__
done
indent >&3 << __EOF__
done
__EOF__
else
for destnet in $(separate_list $destnets); do
addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $newchain
done
fi
chain=$newchain
networks=
destnets=0.0.0.0/0
proto=
ports=
policy=
source="$source except $nomasq"
fi
;;
esac
addrlist=
target=MASQUERADE
[ "x$addresses" = x- ] && addresses=
if [ -n "$addresses" ]; then
case "$addresses" in
SAME:nodst:*)
target="SAME --nodst"
addresses=${addresses#SAME:nodst:}
if [ "$addresses" = detect ]; then
addrlist='$addrlist'
else
for address in $(separate_list $addresses); do
addrlist="$addrlist --to $address";
done
fi
;;
SAME:*)
target="SAME"
addresses=${addresses#SAME:}
if [ "$addresses" = detect ]; then
addrlist='$addrlist'
else
for address in $(separate_list $addresses); do
addrlist="$addrlist --to $address";
done
fi
;;
detect)
target=SNAT
addrlist='$addrlist'
;;
*)
for address in $(separate_list $addresses); do
case $address in
*.*.*.*)
target=SNAT
addrlist="$addrlist --to-source $address"
;;
*)
addrlist="$addrlist --to-ports ${address#:}"
;;
esac
done
;;
esac
if [ "$addrlist" = '$addrlist' ]; then
addresses='$(combine_list $addresses)'
indent >&3 << __EOF__
addrlist=
addressses=\$(find_interface_addresses $interface)
if [ -n "\$addresses" ]; then
for address in \$addresses; do
addrlist="$addrlist --to-source $address"
done
else
fatal_error "Unable to determine the IP address(es) of $interface"
fi
__EOF__
elif [ -n "$add_snat_aliases" ]; then
for address in $(separate_list $addresses); do
address=${address%:)}
if [ -n "$address" ]; then
for addr in $(ip_range_explicit ${address%:*}) ; do
if ! list_search $addr $ALIASES_TO_ADD; then
[ -n "$RETAIN_ALIASES" ] || save_command del_ip_addr $addr $interface
ALIASES_TO_ADD="$ALIASES_TO_ADD $addr $fullinterface"
case $fullinterface in
*:*)
fullinterface=${fullinterface%:*}:$((${fullinterface#*:} + 1 ))
;;
esac
fi
done
fi
done
fi
fi
if [ -n "$networks" ]; then
for network in $networks; do
for destnet in $(separate_list $destnets); do
addnatrule $chain $(both_ip_ranges $network $destnet) $proto $ports $policy -j $target $addrlist
done
if [ -n "$addresses" ]; then
progress_message_and_save " To $destination $displayproto from $network through ${interface} using $addresses"
else
progress_message_and_save " To $destination $displayproto from $network through ${interface}"
fi
done
elif [ -n "$detectinterface" ]; then
indent >&3 << __EOF__
networks="\$(get_routed_networks $detectinterface)"
[ -z "\$networks" ] && fatal_error "Unable to determine the routes through interface \"$detectinterface\""
for network in \$networks; do
__EOF__
for destnet in $(separate_list $destnets); do
indent >&3 << __EOF__
run_iptables -t nat -A $chain -s \$network $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
__EOF__
done
if [ -n "$addresses" ]; then
message=" To $destination $displayproto from \$network through ${interface} using $addresses"
else
message=" To $destination $displayproto from \$network through ${interface}"
fi
indent >&3 << __EOF__
progress_message "$message"
done
__EOF__
else
for destnet in $(separate_list $destnets); do
addnatrule $chain $(dest_ip_range $destnet) $proto $ports $policy -j $target $addrlist
done
if [ -n "$addresses" ]; then
progress_message_and_save " To $destination $displayproto from $source through ${interface} using $addresses"
else
progress_message_and_save " To $destination $displayproto from $source through ${interface}"
fi
fi
}
if [ -n "$NAT_ENABLED" ]; then
progress_message2 "$DOING Masquerading/SNAT"
save_progress_message "Setting up Masquerading/SNAT..."
fi
while read fullinterface networks addresses proto ports ipsec; do
expandv fullinterface networks addresses proto ports ipsec
if [ -n "$NAT_ENABLED" ]; then
setup_one
else
error_message "WARNING: NAT disabled; masq rule ignored"
fi
done < $TMP_DIR/masq
}
#
# Setup Static Network Address Translation (NAT)
#
setup_nat() {
local external= interface= internal= allints= localnat= policyin= policyout=
validate_one() #1 = Variable Name, $2 = Column name, $3 = value
{
case $3 in
Yes|yes)
;;
No|no)
eval ${1}=
;;
*)
[ -n "$3" ] && \
fatal_error "Invalid value ($3) for $2 in entry \"$external $interface $internal $allints $localnat\""
;;
esac
}
do_one_nat() {
local add_ip_aliases=$ADD_IP_ALIASES iface=${interface%:*}
if [ -n "$add_ip_aliases" ]; then
case $interface in
*:)
interface=${interface%:}
add_ip_aliases=
;;
*)
[ -n "$RETAIN_ALIASES" ] || save_command del_ip_addr $external $iface
;;
esac
else
interface=${interface%:}
fi
validate_one allints "ALL INTERFACES" $allints
validate_one localnat "LOCAL" $localnat
if [ -n "$allints" ]; then
addnatrule nat_in -d $external $policyin -j DNAT --to-destination $internal
addnatrule nat_out -s $internal $policyout -j SNAT --to-source $external
else
addnatrule $(input_chain $iface) -d $external $policyin -j DNAT --to-destination $internal
addnatrule $(output_chain $iface) -s $internal $policyout -j SNAT --to-source $external
fi
[ -n "$localnat" ] && \
run_iptables2 -t nat -A OUTPUT -d $external $policyout -j DNAT --to-destination $internal
if [ -n "$add_ip_aliases" ]; then
list_search $external $ALIASES_TO_ADD || \
ALIASES_TO_ADD="$ALIASES_TO_ADD $external $interface"
fi
}
#
# At this point, we're just interested in the network translation
#
> $STATEDIR/nat
if [ -n "$POLICY_MATCH" ]; then
policyin="-m policy --pol none --dir in"
policyout="-m policy --pol none --dir out"
fi
[ -n "$RETAIN_ALIASES" ] || save_progress_message "Setting up one-to-one NAT..."
while read external interface internal allints localnat; do
expandv external interface internal allints localnat
do_one_nat
progress_message_and_save " Host $internal NAT $external on $interface"
done < $TMP_DIR/nat
}
#
# Setup Network Mapping (NETMAP)
#
setup_netmap() {
while read type net1 interface net2 ; do
expandv type net1 interface net2
list_search $interface $ALL_INTERFACES || \
fatal_error "Unknown interface $interface in entry \"$type $net1 $interface $net2\""
case $type in
DNAT)
addnatrule $(input_chain $interface) -d $net1 -j NETMAP --to $net2
;;
SNAT)
addnatrule $(output_chain $interface) -s $net1 -j NETMAP --to $net2
;;
*)
fatal_error "Invalid type $type in entry \"$type $net1 $interface $net2\""
;;
esac
progress_message_and_save " Network $net1 on $interface mapped to $net2 ($type)"
done < $TMP_DIR/netmap
}

View File

@ -116,8 +116,10 @@ fi
%attr(0555,root,root) /usr/share/shorewall/help
%attr(0644,root,root) /usr/share/shorewall/Limit
%attr(0444,root,root) /usr/share/shorewall/lib.dynamiczones
%attr(0444,root,root) /usr/share/shorewall/lib.nat
%attr(0444,root,root) /usr/share/shorewall/lib.tc
%attr(0444,root,root) /usr/share/shorewall/lib.tcrules
%attr(0444,root,root) /usr/share/shorewall/lib.tunnels
%attr(0644,root,root) /usr/share/shorewall/macro.AllowICMPs
%attr(0644,root,root) /usr/share/shorewall/macro.Amanda
%attr(0644,root,root) /usr/share/shorewall/macro.Auth