extern/shorewall_code
1
0
Fork 1
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-15 19:01:19 +01:00
Code Issues Packages Projects Releases Wiki Activity

Remove superfluous test; switch release docs to 3.3.4

Browse Source 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@4720 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
This commit is contained in:
teastep 2006-10-20 17:41:13 +00:00
parent 867a707d83
commit 796362b3ba
3 changed files with 116 additions and 147 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Shorewall/changelog.txt
View File

@ -1,3 +1,7 @@
Changes in 3.3.4
1) Make exclusion work with "show zones"
Changes in 3.3.3
1) Fix excluding in SUBNET column.

7
Shorewall/compiler
View File

@ -4387,13 +4387,6 @@ activate_rules()
# If the zone has a single interface then what matters is how many ports it has
#
[ $num_ifaces -eq 1 -a -n "$ports" ] && num_ifaces=$(list_count1 $ports)
#
# If we don't need to route back and if we have only one interface or one port to
# the zone then assume that hosts in the zone can communicate directly.
#
if [ $num_ifaces -lt 2 -a -z "$routeback" -a -z "$exclusions" ] ; then
continue
fi
else
routeback=
num_ifaces=0

252
Shorewall/releasenotes.txt
View File

@ -1,4 +1,4 @@
Shorewall 3.3.3
Shorewall 3.3.4
Note to users upgrading from Shorewall 3.0 or 3.3
@ -31,149 +31,14 @@ Shorewall 3.3.3
Please see the "Migration Considerations" below for additional upgrade
information.
Problems Corrected in 3.3.3
Problems Corrected in 3.3.4
1) Previously, the 'provider' portion of the packet mark was not being
cleared after routing for traffic that originates on the firewall
itself.
None.
Other changes in 3.3.3
Other Changes in 3.3.4.
1) For users whose kernel and iptables have Extended MARK Target
support, it is now possible to logically AND or OR a value into the
current packet mark by preceding the mark value (and optional mask)
with an ampersand ("&") or vertical bar ("|") respectively.
None.
Example: To logically OR the value 4 into the mark value for
packets from 192.168.1.1:
#MARK SOURCE
|4 192.168.1.1
2) Previously, zone names were restricted to five characters in
length. That length derives from the --log-prefix in Netfilter log
messages which must be 29 bytes or less in length. With the
standard Shorewall LOGFORMAT, 11 characters are left for the
chain name; since many chain names are of the form
<zone1>2<zone2>, we have a maximum zone name length of 5.
Beginning with this release, the maximum length of a zone name is
dependent on the LOGFORMAT (the maximum length may never be less
than 5 but it may be greater than 5). For example, setting
LOGFORMAT="FW:%s:%s:" will allow zone names of up to 8 characters.
As part of this change, /sbin/shorewall[-lite] no longer uses the
LOGFORMAT to select Shorewall messages from log files. Instead, it
uses the regular expression /IN=.* OUT=/ which will match any
netfilter-generated log message.
3) Netfilter provides support for attaching comments to Netfilter
rules. Comments can be up to 255 bytes in length and are
visible using the "shorewall show <chain>", "shorewall show nat",
"shorewall show mangle" and "shorewall dump" commands. Comments are
delimited by '/* ... */" in the output.
Beginning with Shorewall 3.3.3, you may place COMMENT lines in the
/etc/shorewall/rules, /etc/shorewall/tcrules, /etc/shorewall/nat
and /etc/shorewall/masq files and in action files. The remainder of
the line is treated as a comment and it will be attached as a
Netfilter comment to the rule(s) generated by the following entries
in the file.
Note: Do not prefix the comment with "#". Shorewall's two-pass
compiler strips off "#" comments in the first pass and processes
COMMENT lines in the second pass. So by the time that COMMENT is
processed, the "#" and everything after it has been removed (see
example below).
To stop the current comment from being attached to further
rules, simply include COMMENT on a line by itself (so that the
following rules will have no comment) or specify a new COMMENT.
If you do not have Comment support in your iptables/kernel (see the
output of "shorewall[-lite] show capabilities") then COMMENTS are
ignored with this warning:
COMMENT ignored -- requires comment support in iptables/Netfilter
Example from my rules file:
#SOURCE SOURCE DEST PROTO DEST PORT(S)
COMMENT Stop Microsoft Noise
REJECT loc net tcp 137,445
REJECT loc net udp 137:139
COMMENT # Stop comment from being attached to rules below
The output of "shorewall show loc2net" includes (folded):
0 0 reject tcp -- * * 0.0.0.0/0
0.0.0.0/0 multiport dports 137,445 /* Stop Microsoft Noise */
0 0 reject udp -- * * 0.0.0.0/0
0.0.0.0/0 udp dpts:137:139 /* Stop Microsoft Noise */
4) A new macro (macro.RDP) has been added for Microsoft Remote
Desktop. This macro was contributed by Tuomo Soini.
5) A new 'maclog' extension file has been added. This file is
processed just before logging based on the setting of
MACLIST_LOG_LEVEL is done. When invoked, the CHAIN variable will
contain the name of the chain where rules should be inserted.
Remember that if you have specified MACLIST_TABLE=mangle, then your
run_iptables commands should include "-t mangle".
6) The SUBNET column in /etc/shorewall/masq has been renamed SOURCE to
more accurately describe the contents of the column.
7) Previously, it was not possible to use exclusion in
/etc/shorewall/hosts. Beginning with this release, you may now use
exclusion lists in entries in this file. Exclusion lists are
discussed at:
http://www.shorewall.net/configuration_file_basics.htm#Exclusion.
Example:
loc eth0:192.168.1.0/24!192.168.1.4,192.168.1.16/28
In that example, the 'loc' zone is defined to be the subnet
192.168.1.0/24 interfacing via eth0 *except* for host 192.168.1.4
and hosts in the sub-network 192.168.1.16/28.
8) In prior Shorewall versions, multiple jumps to a '2all' chain could
be generated in succession.
Example from an earlier shorewall version:
gateway:~ # shorewall-lite show eth2_fwd
Shorewall Lite 3.3.2 Chains eth2_fwd at gateway - Thu Oct 19 08:54:37 PDT 2006
Counters reset Thu Oct 19 08:34:47 PDT 2006
Chain eth2_fwd (1 references)
pkts bytes target prot opt in out source destination
0 0 dynamic all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW
0 0 wifi2all all -- * eth0 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
0 0 wifi2all all -- * br0 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
0 0 wifi2all all -- * eth3 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
0 0 wifi2all all -- * tun+ 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
gateway:~ #
This redundancy has been eliminated:
gateway:~ # shorewall-lite show eth2_fwd
Shorewall Lite 3.3.3 Chains eth2_fwd at gateway - Thu Oct 19 09:15:24 PDT 2006
Counters reset Thu Oct 19 09:15:19 PDT 2006
Chain eth2_fwd (1 references)
pkts bytes target prot opt in out source destination
0 0 dynamic all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW
0 0 wifi2all all -- * * 0.0.0.0/0 0.0.0.0/0
gateway:~ #
Migration Considerations:
1) Shorewall supports the notion of "default actions". A default
@ -378,3 +243,110 @@ New Features:
than 5 but it may be greater than 5). For example, setting
LOGFORMAT="FW:%s:%s:" will allow zone names of up to 8 characters.
6) Netfilter provides support for attaching comments to Netfilter
rules. Comments can be up to 255 bytes in length and are
visible using the "shorewall show <chain>", "shorewall show nat",
"shorewall show mangle" and "shorewall dump" commands. Comments are
delimited by '/* ... */" in the output.
Beginning with Shorewall 3.3.3, you may place COMMENT lines in the
/etc/shorewall/rules, /etc/shorewall/tcrules, /etc/shorewall/nat
and /etc/shorewall/masq files and in action files. The remainder of
the line is treated as a comment and it will be attached as a
Netfilter comment to the rule(s) generated by the following entries
in the file.
Note: Do not prefix the comment with "#". Shorewall's two-pass
compiler strips off "#" comments in the first pass and processes
COMMENT lines in the second pass. So by the time that COMMENT is
processed, the "#" and everything after it has been removed (see
example below).
To stop the current comment from being attached to further
rules, simply include COMMENT on a line by itself (so that the
following rules will have no comment) or specify a new COMMENT.
If you do not have Comment support in your iptables/kernel (see the
output of "shorewall[-lite] show capabilities") then COMMENTS are
ignored with this warning:
COMMENT ignored -- requires comment support in iptables/Netfilter
Example from my rules file:
#SOURCE SOURCE DEST PROTO DEST PORT(S)
COMMENT Stop Microsoft Noise
REJECT loc net tcp 137,445
REJECT loc net udp 137:139
COMMENT # Stop comment from being attached to rules below
The output of "shorewall show loc2net" includes (folded):
0 0 reject tcp -- * * 0.0.0.0/0
0.0.0.0/0 multiport dports 137,445 /* Stop Microsoft Noise */
0 0 reject udp -- * * 0.0.0.0/0
0.0.0.0/0 udp dpts:137:139 /* Stop Microsoft Noise */
7) A new macro (macro.RDP) has been added for Microsoft Remote
Desktop. This macro was contributed by Tuomo Soini.
8) A new 'maclog' extension file has been added. This file is
processed just before logging based on the setting of
MACLIST_LOG_LEVEL is done. When invoked, the CHAIN variable will
contain the name of the chain where rules should be inserted.
Remember that if you have specified MACLIST_TABLE=mangle, then your
run_iptables commands should include "-t mangle".
9) The SUBNET column in /etc/shorewall/masq has been renamed SOURCE to
more accurately describe the contents of the column.
10) Previously, it was not possible to use exclusion in
/etc/shorewall/hosts. Beginning with this release, you may now use
exclusion lists in entries in this file. Exclusion lists are
discussed at:
http://www.shorewall.net/configuration_file_basics.htm#Exclusion.
Example:
loc eth0:192.168.1.0/24!192.168.1.4,192.168.1.16/28
In that example, the 'loc' zone is defined to be the subnet
192.168.1.0/24 interfacing via eth0 *except* for host 192.168.1.4
and hosts in the sub-network 192.168.1.16/28.
11) In prior Shorewall versions, multiple jumps to a '2all' chain could
be generated in succession.
Example from an earlier shorewall version:
gateway:~ # shorewall-lite show eth2_fwd
Shorewall Lite 3.3.2 Chains eth2_fwd at gateway - Thu Oct 19 08:54:37 PDT 2006
Counters reset Thu Oct 19 08:34:47 PDT 2006
Chain eth2_fwd (1 references)
pkts bytes target prot opt in out source destination
0 0 dynamic all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW
0 0 wifi2all all -- * eth0 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
0 0 wifi2all all -- * br0 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
0 0 wifi2all all -- * eth3 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
0 0 wifi2all all -- * tun+ 0.0.0.0/0 0.0.0.0/0 policy match dir out pol none
gateway:~ #
This redundancy has been eliminated:
gateway:~ # shorewall-lite show eth2_fwd
Shorewall Lite 3.3.3 Chains eth2_fwd at gateway - Thu Oct 19 09:15:24 PDT 2006
Counters reset Thu Oct 19 09:15:19 PDT 2006
Chain eth2_fwd (1 references)
pkts bytes target prot opt in out source destination
0 0 dynamic all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID,NEW
0 0 wifi2all all -- * * 0.0.0.0/0 0.0.0.0/0
gateway:~ #