diff --git a/Shorewall-lite/fallback.sh b/Shorewall-lite/fallback.sh
index 1348c66bc..f679469e7 100755
--- a/Shorewall-lite/fallback.sh
+++ b/Shorewall-lite/fallback.sh
@@ -28,7 +28,7 @@
 #       shown below. Simply run this script to revert to your prior version of
 #       Shoreline Firewall.
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall-lite/install.sh b/Shorewall-lite/install.sh
index 2d96e541c..de2d35456 100755
--- a/Shorewall-lite/install.sh
+++ b/Shorewall-lite/install.sh
@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall-lite/shorewall-lite.spec b/Shorewall-lite/shorewall-lite.spec
index 00b7653c0..5e7144f07 100644
--- a/Shorewall-lite/shorewall-lite.spec
+++ b/Shorewall-lite/shorewall-lite.spec
@@ -1,5 +1,5 @@
 %define name shorewall-lite
-%define version 4.4.2
+%define version 4.4.3
 %define release 0base
 
 Summary: Shoreline Firewall Lite is an iptables-based firewall for Linux systems.
@@ -98,6 +98,8 @@ fi
 %doc COPYING changelog.txt releasenotes.txt
 
 %changelog
+* Fri Oct 02 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
 * Sun Sep 06 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.2-0base
 * Fri Sep 04 2009 Tom Eastep tom@shorewall.net
diff --git a/Shorewall-lite/uninstall.sh b/Shorewall-lite/uninstall.sh
index 1fff5a888..500833ab9 100755
--- a/Shorewall-lite/uninstall.sh
+++ b/Shorewall-lite/uninstall.sh
@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall/Perl/Shorewall/Config.pm b/Shorewall/Perl/Shorewall/Config.pm
index 2a8ccd174..a0b5a9990 100644
--- a/Shorewall/Perl/Shorewall/Config.pm
+++ b/Shorewall/Perl/Shorewall/Config.pm
@@ -328,7 +328,7 @@ sub initialize( $ ) {
 		    TC_SCRIPT => '',
 		    EXPORT => 0,
 		    UNTRACKED => 0,
-		    VERSION => "4.4.2",
+		    VERSION => "4.4.3",
 		    CAPVERSION => 40402 ,
 		  );
 
diff --git a/Shorewall/changelog.txt b/Shorewall/changelog.txt
index 528b66cb0..7605f3e76 100644
--- a/Shorewall/changelog.txt
+++ b/Shorewall/changelog.txt
@@ -1,3 +1,7 @@
+Changes in Shorewall 4.4.3
+
+None.
+
 Changes in Shorewall 4.4.2
 
 1)  BUGFIX: Correct detection of Persistent SNAT support
diff --git a/Shorewall/install.sh b/Shorewall/install.sh
index e88319be3..e6e50f67b 100755
--- a/Shorewall/install.sh
+++ b/Shorewall/install.sh
@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall/known_problems.txt b/Shorewall/known_problems.txt
index b64d608ba..697586326 100644
--- a/Shorewall/known_problems.txt
+++ b/Shorewall/known_problems.txt
@@ -1 +1 @@
-There are no known problems in Shorewall version 4.4.2
+There are no known problems in Shorewall version 4.4.3
diff --git a/Shorewall/releasenotes.txt b/Shorewall/releasenotes.txt
index b7960bfa1..f4eb8ce62 100644
--- a/Shorewall/releasenotes.txt
+++ b/Shorewall/releasenotes.txt
@@ -1,4 +1,4 @@
-Shorewall 4.4.2
+Shorewall 4.4.3
 
 ----------------------------------------------------------------------------
                R E L E A S E  4 . 4  H I G H L I G H T S
@@ -170,58 +170,10 @@ Shorewall 4.4.2
     then it may have no additional members in /etc/shorewall/hosts.
 
 ----------------------------------------------------------------------------
-          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 2
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 3
 ----------------------------------------------------------------------------
 
-1)  Detection of Persistent SNAT was broken in the rules compiler. 
-
-2)  Initialization of the compiler's chain table was occurring before 
-    shorewall.conf had been read and before the capabilities had been
-    determined. This could lead to incorrect rules and Perl runtime
-    errors.
-
-3)  The 'shorewall check' command previously did not detect errors in
-    /etc/shorewall/routestopped.
-
-4)  In earlier versions, if a file with the same name as a built-in
-    action were present in the CONFIG_PATH, then the compiler would
-    process that file like it was an extension script.
-
-    The compiler now ignores the presence of such files.
-
-5)  Several configuration issues which previously produced an error or
-    warning are now handled differently.
-
-    a)  MAPOLDACTIONS=Yes and MAPOLDACTIOSN= in shorewall.conf are now
-        handled as they were by the old shell-based compiler. That is,
-        they cause pre-3.0 built-in actions to be mapped automatically
-        to the corresponding macro invocation.
-
-    b)  SAVE_IPSETS=Yes no longer produces a fatal error -- it is now a
-        warning.
-
-    c)  DYNAMIC_ZONES=Yes no longer produces a fatal error -- it is now
-        a warning.
-
-    d)  RFC1918_STRICT=Yes no loger produces a fatal error -- it is now
-        a warning.
-
-6)  Previously, it was not possible to specify an IP address range in
-    ADDRESS column of /etc/shorewall/masq. Thanks go to Jessee Shrieve
-    for the patch.
-
-7)  The 'wait4ifup' script included for Debian compatibility now runs
-    correctly with no PATH.
-
-8)  The new per-IP LIMIT feature now works with ancient iptables
-    releases (e.g., 1.3.5 as found on RHEL 5). This change required
-    testing for an additional capability which means that those who use
-    a capabilities file should regenerate that file after installing
-    4.4.2.
-
-9)  One unintended difference between Shorewall-shell and
-    Shorewall-perl was that Shorewall-perl did not support the MARK
-    column in action bodies. This has been corrected.
+None.
 
 ----------------------------------------------------------------------------
              K N O W N   P R O B L E M S   R E M A I N I N G
@@ -230,38 +182,10 @@ Shorewall 4.4.2
 None.
 
 ----------------------------------------------------------------------------
-                N E W   F E A T U R E S   I N   4 . 4 . 2
+                N E W   F E A T U R E S   I N   4 . 4 . 3
 ----------------------------------------------------------------------------
 
-1)  Prior to this release, line continuation has taken precedence over 
-    #-style comments. This prevented us from doing the following:
-
-    	    ACCEPT    net:206.124.146.176,\   #Gateway
-	    	          206.124.146.177,\   #Mail
-			  206.124.146.178\    #Server
-			  		      ...
-    
-    Now, unless a line ends with '\', any trailing comment is stripped
-    off (including any white-space preceding the '#'). Then if the line
-    ends with '\', it is treated as a continuation line as normal.
-
-2)  Three new columns have been added to FORMAT-2 macro bodies.
-
-    	  MARK
-	  CONNLIMIT
-	  TIME
-
-    These three columns correspond to the similar columns in
-    /etc/shorewall/rules and must be empty in macros invoked from an
-    action.
-
-3)  Accounting chains may now have extension scripts. Simply place your
-    Perl script in the file /etc/shorewall/<chain> and when the
-    accounting chain named <chain> is created, your script will be
-    invoked.
-
-    As usual, the variable $chainref will contain a reference to the
-    chain's table entry.
+None.
 
 ----------------------------------------------------------------------------
                 N E W   F E A T U R E S   I N   4 . 4 . 0
@@ -1005,3 +929,91 @@ None.
 5)  A flaw in the parsing logic for the zones file allowed most zone
     types containing the character string 'ip' to be accepted as a
     synonym for 'ipv4' (or ipv6 if compiling an IPv6 configuration).
+
+----------------------------------------------------------------------------
+          P R O B L E M S   C O R R E C T E D   I N   4 . 4 . 2
+----------------------------------------------------------------------------
+
+1)  Detection of Persistent SNAT was broken in the rules compiler. 
+
+2)  Initialization of the compiler's chain table was occurring before 
+    shorewall.conf had been read and before the capabilities had been
+    determined. This could lead to incorrect rules and Perl runtime
+    errors.
+
+3)  The 'shorewall check' command previously did not detect errors in
+    /etc/shorewall/routestopped.
+
+4)  In earlier versions, if a file with the same name as a built-in
+    action were present in the CONFIG_PATH, then the compiler would
+    process that file like it was an extension script.
+
+    The compiler now ignores the presence of such files.
+
+5)  Several configuration issues which previously produced an error or
+    warning are now handled differently.
+
+    a)  MAPOLDACTIONS=Yes and MAPOLDACTIOSN= in shorewall.conf are now
+        handled as they were by the old shell-based compiler. That is,
+        they cause pre-3.0 built-in actions to be mapped automatically
+        to the corresponding macro invocation.
+
+    b)  SAVE_IPSETS=Yes no longer produces a fatal error -- it is now a
+        warning.
+
+    c)  DYNAMIC_ZONES=Yes no longer produces a fatal error -- it is now
+        a warning.
+
+    d)  RFC1918_STRICT=Yes no loger produces a fatal error -- it is now
+        a warning.
+
+6)  Previously, it was not possible to specify an IP address range in
+    ADDRESS column of /etc/shorewall/masq. Thanks go to Jessee Shrieve
+    for the patch.
+
+7)  The 'wait4ifup' script included for Debian compatibility now runs
+    correctly with no PATH.
+
+8)  The new per-IP LIMIT feature now works with ancient iptables
+    releases (e.g., 1.3.5 as found on RHEL 5). This change required
+    testing for an additional capability which means that those who use
+    a capabilities file should regenerate that file after installing
+    4.4.2.
+
+9)  One unintended difference between Shorewall-shell and
+    Shorewall-perl was that Shorewall-perl did not support the MARK
+    column in action bodies. This has been corrected.
+
+----------------------------------------------------------------------------
+                N E W   F E A T U R E S   I N   4 . 4 . 2
+----------------------------------------------------------------------------
+
+1)  Prior to this release, line continuation has taken precedence over 
+    #-style comments. This prevented us from doing the following:
+
+    	    ACCEPT    net:206.124.146.176,\   #Gateway
+	    	          206.124.146.177,\   #Mail
+			  206.124.146.178\    #Server
+			  		      ...
+    
+    Now, unless a line ends with '\', any trailing comment is stripped
+    off (including any white-space preceding the '#'). Then if the line
+    ends with '\', it is treated as a continuation line as normal.
+
+2)  Three new columns have been added to FORMAT-2 macro bodies.
+
+    	  MARK
+	  CONNLIMIT
+	  TIME
+
+    These three columns correspond to the similar columns in
+    /etc/shorewall/rules and must be empty in macros invoked from an
+    action.
+
+3)  Accounting chains may now have extension scripts. Simply place your
+    Perl script in the file /etc/shorewall/<chain> and when the
+    accounting chain named <chain> is created, your script will be
+    invoked.
+
+    As usual, the variable $chainref will contain a reference to the
+    chain's table entry.
diff --git a/Shorewall/shorewall.spec b/Shorewall/shorewall.spec
index c9a46115b..08ecbf8ea 100644
--- a/Shorewall/shorewall.spec
+++ b/Shorewall/shorewall.spec
@@ -1,5 +1,5 @@
 %define name shorewall
-%define version 4.4.2
+%define version 4.4.3
 %define release 0base
 
 Summary: Shoreline Firewall is an iptables-based firewall for Linux systems.
@@ -104,6 +104,8 @@ fi
 %doc COPYING INSTALL changelog.txt releasenotes.txt Contrib/* Samples 
 
 %changelog
+* Fri Oct 02 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
 * Sun Sep 06 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.2-0base
 * Fri Sep 04 2009 Tom Eastep tom@shorewall.net
diff --git a/Shorewall/uninstall.sh b/Shorewall/uninstall.sh
index 272ad011d..000c101ce 100755
--- a/Shorewall/uninstall.sh
+++ b/Shorewall/uninstall.sh
@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall6-lite/fallback.sh b/Shorewall6-lite/fallback.sh
index 1348c66bc..f679469e7 100755
--- a/Shorewall6-lite/fallback.sh
+++ b/Shorewall6-lite/fallback.sh
@@ -28,7 +28,7 @@
 #       shown below. Simply run this script to revert to your prior version of
 #       Shoreline Firewall.
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall6-lite/install.sh b/Shorewall6-lite/install.sh
index e4f5bbe09..d77c98625 100755
--- a/Shorewall6-lite/install.sh
+++ b/Shorewall6-lite/install.sh
@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall6-lite/shorewall6-lite.spec b/Shorewall6-lite/shorewall6-lite.spec
index 7ddded100..c7ab214e1 100644
--- a/Shorewall6-lite/shorewall6-lite.spec
+++ b/Shorewall6-lite/shorewall6-lite.spec
@@ -1,5 +1,5 @@
 %define name shorewall6-lite
-%define version 4.4.2
+%define version 4.4.3
 %define release 0base
 
 Summary: Shoreline Firewall 6 Lite is an ip6tables-based firewall for Linux systems.
@@ -89,6 +89,8 @@ fi
 %doc COPYING changelog.txt releasenotes.txt
 
 %changelog
+* Fri Oct 02 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
 * Sun Sep 06 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.2-0base
 * Fri Sep 04 2009 Tom Eastep tom@shorewall.net
diff --git a/Shorewall6-lite/uninstall.sh b/Shorewall6-lite/uninstall.sh
index c42795847..9aa500275 100755
--- a/Shorewall6-lite/uninstall.sh
+++ b/Shorewall6-lite/uninstall.sh
@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall6/fallback.sh b/Shorewall6/fallback.sh
index 862165eed..227014b7a 100755
--- a/Shorewall6/fallback.sh
+++ b/Shorewall6/fallback.sh
@@ -28,7 +28,7 @@
 #       shown below. Simply run this script to revert to your prior version of
 #       Shoreline Firewall.
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall6/install.sh b/Shorewall6/install.sh
index 1bf97edcc..2833e9efd 100755
--- a/Shorewall6/install.sh
+++ b/Shorewall6/install.sh
@@ -22,7 +22,7 @@
 #       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {
diff --git a/Shorewall6/shorewall6.spec b/Shorewall6/shorewall6.spec
index e157c1c83..53f65518f 100644
--- a/Shorewall6/shorewall6.spec
+++ b/Shorewall6/shorewall6.spec
@@ -1,5 +1,5 @@
 %define name shorewall6
-%define version 4.4.2
+%define version 4.4.3
 %define release 0base
 
 Summary: Shoreline Firewall 6 is an ip6tables-based firewall for Linux systems.
@@ -93,6 +93,8 @@ fi
 %doc COPYING INSTALL changelog.txt releasenotes.txt tunnel ipsecvpn ipv6 Samples6
 
 %changelog
+* Fri Oct 02 2009 Tom Eastep tom@shorewall.net
+- Updated to 4.4.3-0base
 * Sun Sep 06 2009 Tom Eastep tom@shorewall.net
 - Updated to 4.4.2-0base
 * Fri Sep 04 2009 Tom Eastep tom@shorewall.net
diff --git a/Shorewall6/uninstall.sh b/Shorewall6/uninstall.sh
index ac9ec2acb..84323346f 100755
--- a/Shorewall6/uninstall.sh
+++ b/Shorewall6/uninstall.sh
@@ -26,7 +26,7 @@
 #       You may only use this script to uninstall the version
 #       shown below. Simply run this script to remove Shorewall Firewall
 
-VERSION=4.4.2
+VERSION=4.4.3
 
 usage() # $1 = exit status
 {