extern/shorewall_code
1
0
Fork 1
mirror of https://gitlab.com/shorewall/code.git synced 2024-11-23 08:03:11 +01:00
Code Issues Packages Projects Releases Wiki Activity

Updated Comments For 1.4.6 Shorewall Distrubution Changes

Browse Source 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@669 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
This commit is contained in:
frannie 2003-07-21 18:01:35 +00:00
parent 50252c7b7e
commit a8c7dd101d
11 changed files with 114 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Samples/one-interface/interfaces
View File

@ -19,6 +19,10 @@
# once in this file. You may NOT specify the name of
# an alias (e.g., eth0:0) here; see
# http://www.shorewall.net/FAQ.htm#faq18
#
# You may specify wildcards here. For example, if you
# want to make a entry that applies to all PPP
# interfaces, use 'ppp+'
#
# DO NOT DEFINE THE LOOPBACK INTERFACE (lo) IN THIS FILE.
#
@ -94,6 +98,14 @@
# intended soley for use with Proxy ARP
# sub-networking as described at:
# http://www.tldp.org/HOWTO/mini/Proxy-ARP-Subnet
# newnotsyn
# TCP packets that don't have the SYN flag set and
# which are not part of an established connection
# will be accepted from this interface, even if
# NEWNOTSYN=No has been specified in
# /etc/shorewall/shorewall.conf.
#
# This option has no effect if NEWNOTSYN=Yes
#
# The order in which you list the options is not
# significant but the list should have no embedded white

26
Samples/one-interface/rules
View File

@ -16,7 +16,7 @@
#
#
# ACTION ACCEPT, DROP, REJECT, DNAT, DNAT-, REDIRECT,
# CONTINUE or LOG.
# REDIRECT-, CONTINUE or LOG.
#
# ACCEPT
# Allow the connection request
@ -121,6 +121,12 @@
# 3. You may not specify both an interface and
# an address
#
# Unlike in the SOURCE column, you may specify a range of
# up to 256 IP addresses using the syntax
# <first ip>-<last ip>. When the ACTION is DNAT or DNAT-,
# the connections will be assigned to addresses in the
# range in a round-robin fashion.
#
# The port that the server is listening on may be
# included and separated from the server's IP address by
# ":". If omitted, the firewall will not modifiy the
@ -136,7 +142,7 @@
# contain the port number on the firewall that the
# request should be redirected to.
#
# PROTO Protocol - Must be "tcp", "udp", "icmp", a number,
# PROTO Protocol - Must be "tcp", "udp", "icmp", a number or
# "all".
#
# DEST PORT(S) Destination Ports. A comma-separated list of Port
@ -147,11 +153,11 @@
# A port range is expressed as <low port>:<high port>.
#
# This column is ignored if PROTOCOL = all but must be
# entered if any of the following ields are supplied.
# entered if any of the following fields are supplied.
# In that case, it is suggested that this field contain
# "-"
#
# If MULTIPORT=Yes in /etc/shorewall/shorewall.conf, then
# If your kernel contains multi-port match support, then
# only a single Netfilter rule will be generated if in
# this list and the CLIENT PORT(S) list below:
# 1. There are 15 or less ports listed.
@ -168,7 +174,7 @@
# specify an ADDRESS in the next column, then place "-"
# in this column.
#
# If MULTIPORT=Yes in /etc/shorewall/shorewall.conf, then
# If your kernel contains multiport match support, then
# only a single Netfilter rule will be generated if in
# this list and the DEST PORT(S) list above:
# 1. There are 15 or less ports listed.
@ -183,6 +189,16 @@
# that address will be forwarded to the IP and port
# specified in the DEST column.
#
# A comma-separated list of addresses may also be used.
# This is usually most useful with the REDIRECT target
# where you want to redirect traffic destined for
# a particular set of hosts.
#
# Finally, if the list of addresses begins with "!" then
# the rule will be followed only if the original
# destination address in the connection request does not
# match any of the addresses listed.
#
# The address may optionally be followed by
# a colon (":") and a second IP address. This causes
# Shorewall to use the second IP address as the source

2
Samples/one-interface/zones
View File

@ -4,7 +4,7 @@
#
# This file determines your network zones. Columns are:
#
# ZONE Short name of the zone
# ZONE Short name of the zone (5 Characters or less in length).
# DISPLAY Display name of the zone
# COMMENTS Comments about the zone
#

8
Samples/three-interfaces/interfaces
View File

@ -98,6 +98,14 @@
# intended soley for use with Proxy ARP
# sub-networking as described at:
# http://www.tldp.org/HOWTO/mini/Proxy-ARP-Subnet
# netnotsyn
# TCP packets that don't have the SYN flag set and
# which are not part of an established connection
# will be accepted from this interface, even if
# NEWNOTSYN=No has been specified in
# /etc/shorewall/shorewall.conf.
#
# This option has no effect if NEWNOTSYN=Yes.
#
# The order in which you list the options is not
# significant but the list should have no embedded white

12
Samples/three-interfaces/masq
View File

@ -45,12 +45,14 @@
# will automatically add this address to the
# INTERFACE named in the first column.
#
# WARNING: Do NOT specify ADD_SNAT_ALIASES=Yes if
# the address given in this column is the primary
# IP address for the interface in the INTERFACE
# column.
# You may also specify a range of up to 256 IP addresses
# if you want the SNAT address to be assigned from that
# range in a round-robin range by connection. The range is
# specified by <first ip in range>-<last ip in range>.
#
# This column may not contain a DNS Name.
# Example: 206.124.146.177-206.124.146.180
#
# This column may not contain a DNS Names.
#
# Example 1:
#

26
Samples/three-interfaces/rules
View File

@ -16,7 +16,7 @@
#
#
# ACTION ACCEPT, DROP, REJECT, DNAT, DNAT-, REDIRECT,
# CONTINUE or LOG.
# REDIRECT-, CONTINUE or LOG.
#
# ACCEPT
# Allow the connection request
@ -121,6 +121,12 @@
# 3. You may not specify both an interface and
# an address.
#
# Unlike in the SOURCE column, you may specify a range of
# up to 256 IP addresses using the syntax
# <first ip>-<last ip>. When the ACTION is DNAT or DNAT-,
# the connections will be assigned to addresses in the
# range in a round-robin fashion.
#
# The port that the server is listening on may be
# included and separated from the server's IP address by
# ":". If omitted, the firewall will not modifiy the
@ -147,11 +153,11 @@
# A port range is expressed as <low port>:<high port>.
#
# This column is ignored if PROTOCOL = all but must be
# entered if any of the following ields are supplied.
# entered if any of the following fields are supplied.
# In that case, it is suggested that this field contain
# "-"
#
# If MULTIPORT=Yes in /etc/shorewall/shorewall.conf, then
# If your kernel contains multi-port match support, then
# only a single Netfilter rule will be generated if in
# this list and the CLIENT PORT(S) list below:
# 1. There are 15 or less ports listed.
@ -168,7 +174,7 @@
# specify an ADDRESS in the next column, then place "-"
# in this column.
#
# If MULTIPORT=Yes in /etc/shorewall/shorewall.conf, then
# If your kernel contains multi-port match support, then
# only a single Netfilter rule will be generated if in
# this list and the DEST PORT(S) list above:
# 1. There are 15 or less ports listed.
@ -183,6 +189,16 @@
# that address will be forwarded to the IP and port
# specified in the DEST column.
#
# A comma separated list of addresses may also be used.
# This is usually most useful with the REDIRECT target
# where you want to redirect traffic destined for
# a particular set of hosts.
#
# Finally, if the list of addresses begines with "!" then
# the rule will be followed only if the original
# destination address in the connection request does not
# match any of the addresses listed.
#
# The address may optionally be followed by
# a colon (":") and a second IP address. This causes
# Shorewall to use the second IP address as the source
@ -247,7 +263,7 @@ ACCEPT loc dmz tcp 22
ACCEPT dmz net tcp 53
ACCEPT dmz net udp 53
#
# Make ping work bi-directionally between the dmz, net, Firewall and local zone
# Make ping work bi-directionally between the dmz, net, Firewall and local zone
# (assumes that the loc-> net policy is ACCEPT).
#
ACCEPT net fw icmp 8

2
Samples/three-interfaces/zones
View File

@ -4,7 +4,7 @@
#
# This file determines your network zones. Columns are:
#
# ZONE Short name of the zone
# ZONE Short name of the zone (5 Characters or less in length).
# DISPLAY Display name of the zone
# COMMENTS Comments about the zone
#

12
Samples/two-interfaces/interfaces
View File

@ -22,6 +22,10 @@
# an alias (e.g., eth0:0) here; see
# http://www.shorewall.net/FAQ.htm#faq18
#
# You may specify wildcards here. For example, if you
# want to make a entry that applies to all PPP
# interfaces, use 'ppp+'.
#
# DO NOT DEFINE THE LOOPBACK INTERFACE (lo) IN THIS FILE.
#
# BROADCAST
@ -98,6 +102,14 @@
# intended soley for use with Proxy ARP
# sub-networking as described at:
# http://www.tldp.org/HOWTO/mini/Proxy-ARP-Subnet
# newnotsyn
# TCP packets that don't have the SYN flag set and
# which are not part of an established connection
# will be accepted from this interface, even if
# NEWNOTSYN=No has been specified in
# /etc/shorewall/shorewall.conf.
#
# This option has no effect if NEWNOTSYN=Yes.
#
# The order in which you list the options is not
# significant but the list should have no embedded white

15
Samples/two-interfaces/masq
View File

@ -44,13 +44,16 @@
# /etc/shorewall/shorewall.conf then Shorewall
# will automatically add this address to the
# INTERFACE named in the first column.
#
# You may also specify a range of up to 256 IP
# addresses if you want the SNAT address to be
# assigned from that range in a round robin range
# by connection. The range is specified by
# <first ip in range>-<last ip in range>.
#
# Example: 206.124.146.177-206.124.146.180
#
# WARNING: Do NOT specify ADD_SNAT_ALIASES=Yes if
# the address given in this column is the primary
# IP address for the interface in the INTERFACE
# column.
#
# This column may not contain a DNS Name.
# This column may not contain DNS names.
#
# Example 1:
#

26
Samples/two-interfaces/rules
View File

@ -16,7 +16,7 @@
#
#
# ACTION ACCEPT, DROP, REJECT, DNAT, DNAT-, REDIRECT,
# CONTINUE or LOG.
# REDIRECT-, CONTINUE or LOG.
#
# ACCEPT
# Allow the connection request
@ -121,6 +121,12 @@
# 3 You may not specify both an interface and
# an address.
#
# Unlike in the SOURCE column, you may specify a range of
# up to 256 IP addresses using the syntax
# <first ip>-<last ip>. When the ACTION is DNAT or DNAT-,
# the connections will be assigned to the addresses in the
# range in a round-robin fashion.
#
# The port that the server is listening on may be
# included and separated from the server's IP address by
# ":". If omitted, the firewall will not modifiy the
@ -136,7 +142,7 @@
# contain the port number on the firewall that the
# request should be redirected to.
#
# PROTO Protocol - Must be "tcp", "udp", "icmp", a number,
# PROTO Protocol - Must be "tcp", "udp", "icmp", a number or
# "all".
#
# DEST PORT(S) Destination Ports. A comma-separated list of Port
@ -147,11 +153,11 @@
# A port range is expressed as <low port>:<high port>.
#
# This column is ignored if PROTOCOL = all but must be
# entered if any of the following ields are supplied.
# entered if any of the following fields are supplied.
# In that case, it is suggested that this field contain
# "-"
#
# If MULTIPORT=Yes in /etc/shorewall/shorewall.conf, then
# If your kernel contains multi-port match support, then
# only a single Netfilter rule will be generated if in
# this list and the CLIENT PORT(S) list below:
# 1. There are 15 or less ports listed.
@ -168,7 +174,7 @@
# specify an ADDRESS in the next column, then place "-"
# in this column.
#
# If MULTIPORT=Yes in /etc/shorewall/shorewall.conf, then
# If your kernel contains multi-port match support, then
# only a single Netfilter rule will be generated if in
# this list and the DEST PORT(S) list above:
# 1. There are 15 or less ports listed.
@ -183,6 +189,16 @@
# that address will be forwarded to the IP and port
# specified in the DEST column.
#
# A comma-separated list of addresses may also be used.
# This is usually most useful with the REDIRECT target
# where you want to redirect traffic destined for
# a particular set of hosts.
#
# Finally, if the list of addresses begins with "!" then
# the rule will be followed only if the original
# destination address in the connection request does not
# match any of the addresses listed.
#
# The address may optionally be followed by
# a colon (":") and a second IP address. This causes
# Shorewall to use the second IP address as the source

2
Samples/two-interfaces/zones
View File

@ -4,7 +4,7 @@
#
# This file determines your network zones. Columns are:
#
# ZONE Short name of the zone
# ZONE Short name of the zone (5 Characters or less in length).
# DISPLAY Display name of the zone
# COMMENTS Comments about the zone
#