fixed quotes, add CVS Id

git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@972 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb

Shorewall-docs/Shorewall_and_Aliased_Interfaces.xml

@@ -2,6 +2,8 @@
 <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
 <article id="Shorewall_and_Aliased_Interfaces">
+  <!--$Id$-->
+
   <articleinfo>
     <title>Shorewall and Aliased Interfaces</title>
 
@@ -30,8 +32,8 @@
       document under the terms of the GNU Free Documentation License, Version
       1.2 or any later version published by the Free Software Foundation; with
       no Invariant Sections, with no Front-Cover, and with no Back-Cover
-      Texts. A copy of the license is included in the section entitled &#34;<ulink
+      Texts. A copy of the license is included in the section entitled
-      url="GnuCopyright.htm">GNU Free Documentation License</ulink>&#34;.</para>
+      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
     </legalnotice>
   </articleinfo>
 
@@ -75,15 +77,15 @@ eth0:0    Link encap:Ethernet  HWaddr 02:00:08:3:FA:55
 [root@gateway root]# </programlisting>
 
       <para><note><para>One <emphasis role="bold">cannot</emphasis> type
-      &#34;ip addr show dev eth0:0&#34; because &#34;eth0:0&#34; is a label
+      <quote>ip addr show dev eth0:0</quote> because <quote>eth0:0</quote> is
-      for a particular address rather than a device name.</para><programlisting>[root@gateway root]# ip addr show dev eth0:0
+      a label for a particular address rather than a device name.</para><programlisting>[root@gateway root]# ip addr show dev eth0:0
 Device &#34;eth0:0&#34; does not exist.
 [root@gateway root]#</programlisting></note></para>
     </example>
 
     <para>The iptables program doesn&#39;t support virtual interfaces in
-    either it&#39;s &#34;-i&#34; or &#34;-o&#34; command options; as a
+    either it&#39;s <quote>-i</quote> or <quote>-o</quote> command options; as
-    consequence, Shorewall does not allow them to be used in the
+    a consequence, Shorewall does not allow them to be used in the
     /etc/shorewall/interfaces file or anywhere else except as described in the
     discussion below.</para>
   </section>
@@ -230,7 +232,7 @@ esac</programlisting>
 
       <para>Shorewall can create the alias (additional address) for you if you
       set ADD_SNAT_ALIASES=Yes in /etc/shorewall/shorewall.conf. Beginning
-      with Shorewall 1.3.14, Shorewall can actually create the &#34;label&#34;
+      with Shorewall 1.3.14, Shorewall can actually create the <quote>label</quote>
       (virtual interface) so that you can see the created address using
       ifconfig. In addition to setting ADD_SNAT_ALIASES=Yes, you specify the
       virtual interface name in the INTERFACE column as follows:</para>
@@ -311,7 +313,7 @@ eth0:2 = 206.124.146.180</programlisting>
 
       <para>Shorewall can create the alias (additional address) for you if you
       set ADD_IP_ALIASES=Yes in /etc/shorewall/shorewall.conf. Beginning with
-      Shorewall 1.3.14, Shorewall can actually create the &#34;label&#34;
+      Shorewall 1.3.14, Shorewall can actually create the <quote>label</quote>
       (virtual interface) so that you can see the created address using
       ifconfig. In addition to setting ADD_IP_ALIASES=Yes, you specify the
       virtual interface name in the INTERFACE column as follows:</para>
@@ -564,8 +566,8 @@ eth0:2 = 206.124.146.180</programlisting>
         align="center">INTERFACE</entry><entry align="center">BROADCAST</entry><entry
         align="center">OPTIONS</entry></row></thead><tbody><row><entry>-</entry><entry>eth1</entry><entry>192.168.1.255,192.168.20.255</entry><entry><xref
         linkend="multiple_subnets-ex2-n1" /></entry></row></tbody></tgroup></table><note
-        id="multiple_subnets-ex2-n1"><para> If you are running Shorewall
+        id="multiple_subnets-ex2-n1"><para>If you are running Shorewall 1.3.10
-        1.3.10 or earlier then you must specify the <emphasis role="bold">multi</emphasis>
+        or earlier then you must specify the <emphasis role="bold">multi</emphasis>
         option.</para></note></para>
 
         <para>In /etc/shorewall/hosts:<table><title>/etc/shorewall/hosts</title><tgroup

Shorewall-docs/Shorewall_and_Kazaa.xml

@@ -2,6 +2,8 @@
 <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
 <article id="Shorewall_and_Kazaa">
+  <!--$Id$-->
+
   <articleinfo>
     <title>Kazaa Filtering</title>
 
@@ -26,22 +28,22 @@
       document under the terms of the GNU Free Documentation License, Version
       1.2 or any later version published by the Free Software Foundation; with
       no Invariant Sections, with no Front-Cover, and with no Back-Cover
-      Texts. A copy of the license is included in the section entitled &#34;<ulink
+      Texts. A copy of the license is included in the section entitled
-      url="GnuCopyright.htm">GNU Free Documentation License</ulink>&#34;.</para>
+      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
     </legalnotice>
   </articleinfo>
 
   <para>Beginning with Shorewall version 1.4.8, Shorewall can interface to
   ftwall. <emphasis role="bold">ftwall</emphasis> is part of the <ulink
   url="http://p2pwall.sourceforge.net">p2pwall project</ulink> and is a
-  user-space filter for applications based on the &#34;Fast Track&#34; peer to
+  user-space filter for applications based on the <quote>Fast Track</quote>
-  peer protocol. Applications using this protocol include Kazaa, KazaaLite,
+  peer to peer protocol. Applications using this protocol include Kazaa,
-  iMash and Grokster.</para>
+  KazaaLite, iMash and Grokster.</para>
 
-  <para>To filter traffic from your &#39;loc&#39; zone with ftwall, you insert
+  <para>To filter traffic from your <quote>loc</quote> zone with ftwall, you
-  the following rules <emphasis role="bold">near the top</emphasis> of your
+  insert the following rules <emphasis role="bold">near the top</emphasis> of
-  /etc/shorewall/rules file (before and ACCEPT rules whose source is the
+  your /etc/shorewall/rules file (before and ACCEPT rules whose source is the
-  &#39;loc&#39; zone).</para>
+  <quote>loc</quote> zone).</para>
 
   <programlisting>        QUEUE   loc        net        tcp
         QUEUE   loc        net        udp

Shorewall-docs/UserSets.xml

@@ -2,6 +2,8 @@
 <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
 <article id="UserSets">
+  <!--$Id$-->
+
   <articleinfo>
     <title>Controlling Output Traffic by UID/GID</title>
 
@@ -26,8 +28,8 @@
       document under the terms of the GNU Free Documentation License, Version
       1.2 or any later version published by the Free Software Foundation; with
       no Invariant Sections, with no Front-Cover, and with no Back-Cover
-      Texts. A copy of the license is included in the section entitled &#34;<ulink
+      Texts. A copy of the license is included in the section entitled
-      url="GnuCopyright.htm">GNU Free Documentation License</ulink>&#34;.</para>
+      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
     </legalnotice>
   </articleinfo>
 
@@ -42,9 +44,9 @@
 
     <itemizedlist>
       <listitem>
-        <para>Shorewall allows you to define collections of users called &#34;<link
+        <para>Shorewall allows you to define collections of users called
-        linkend="UserSet">User Sets</link>&#34; and then to restrict certain
+        <quote><link linkend="UserSet">User Sets</link></quote> and then to
-        rules in /etc/shorewall/rules to a given User Set.</para>
+        restrict certain rules in /etc/shorewall/rules to a given User Set.</para>
       </listitem>
 
       <listitem>
@@ -105,7 +107,7 @@
 
     <para>In the REJECT and ACCEPT columns, if you don&#39;t want to specify a
     value in the column but you want to specify a value in a following column,
-    you may enter &#34;-&#34;.</para>
+    you may enter <quote>-</quote>.</para>
 
     <para>Users and/or groups are added to User Sets using the
     /etc/shorewall/users file. Columns in that file are:</para>
@@ -137,7 +139,7 @@
     </variablelist>
 
     <para>Only one of the USER and GROUP column needs to be non-empty. If you
-    wish to specify a GROUP but not a USER, enter &#34;-&#34; in the user
+    wish to specify a GROUP but not a USER, enter <quote>-</quote> in the user
     column.</para>
 
     <para>If both USER and GROUP are specified then only programs running
@@ -155,10 +157,10 @@
     </important>
 
     <example>
-      <title>You want members of the &#39;admin&#39; group and &#39;root&#39;
+      <title>You want members of the <quote>admin</quote> group and
-      to be able to use ssh on the firewall to connect to local systems. You
+      <quote>root</quote> to be able to use ssh on the firewall to connect to
-      want to log all connections accepted for these users using syslog at the
+      local systems. You want to log all connections accepted for these users
-      &#39;info&#39; level.</title>
+      using syslog at the <quote>info</quote> level.</title>
 
       <para>/etc/shorewall/usersets</para>
 
@@ -195,8 +197,8 @@ ACCEPT  $FW     loc             tcp     22      -       -               -
       <title>You want user <emphasis role="bold">mail</emphasis> to be able to
       send email from the firewall to the local net zone</title>
 
-      <para>/etc/shorewall/rules (be sure to note the &#34;:&#34; in the USER
+      <para>/etc/shorewall/rules (be sure to note the <quote>:</quote> in the
-      SET column entry).</para>
+      USER SET column entry).</para>
 
       <programlisting>#ACTION SOURCE  DESTINATION     PROTO   PORT    SOURCE  ORIGINAL        RATE    USER
 #                                               PORT(S) DESTINATION             SET

Shorewall-docs/VPN.xml

@@ -2,6 +2,8 @@
 <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
 <article id="VPN">
+  <!--$Id$-->
+
   <articleinfo>
     <title>VPN</title>
 
@@ -49,7 +51,7 @@
     <para>If PPTP is being used, there are no firewall requirements beyond the
     default loc-&#62;net ACCEPT policy. There is one restriction however: Only
     one local system at a time can be connected to a single remote gateway
-    unless you patch your kernel from the &#39;Patch-o-matic&#39; patches
+    unless you patch your kernel from the <quote>Patch-o-matic</quote> patches
     available at <ulink url="http://www.netfilter.org">http://www.netfilter.org</ulink>.</para>
 
     <para>If IPSEC is being used then only one system may connect to the