<?xml version="1.0" encoding="UTF-8"?>
<refentry>
  <refmeta>
    <refentrytitle>shorewall-tcclasses</refentrytitle>

    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>tcclasses</refname>

    <refpurpose>Shorewall file to define HTB classes</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis>
      <command>/etc/shorewall/tcclasses</command>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>A note on the <emphasis>rate</emphasis>/bandwidth definitions used
    in this file:</para>

    <itemizedlist>
      <listitem>
        <para>don't use a space between the integer value and the unit: 30kbit
        is valid while 30 kbit is NOT.</para>
      </listitem>

      <listitem>
        <para>you can use one of the following units:</para>

        <variablelist>
          <varlistentry>
            <term><emphasis role="bold">kpbs</emphasis></term>

            <listitem>
              <para>Kilobytes per second.</para>
            </listitem>
          </varlistentry>

          <varlistentry>
            <term><emphasis role="bold">mbps</emphasis></term>

            <listitem>
              <para>Megabytes per second.</para>
            </listitem>
          </varlistentry>

          <varlistentry>
            <term><emphasis role="bold">kbit</emphasis></term>

            <listitem>
              <para>Kilobits per second.</para>
            </listitem>
          </varlistentry>

          <varlistentry>
            <term><emphasis role="bold">mbit</emphasis></term>

            <listitem>
              <para>Megabits per second.</para>
            </listitem>
          </varlistentry>

          <varlistentry>
            <term><emphasis role="bold">bps</emphasis> or <emphasis
            role="bold">number</emphasis></term>

            <listitem>
              <para>Bytes per second.</para>
            </listitem>
          </varlistentry>
        </variablelist>
      </listitem>

      <listitem>
        <para>if you want the values to be calculated for you depending on the
        output bandwidth setting defined for an interface in tcdevices, you
        can use expressions like the following:</para>

        <variablelist>
          <varlistentry>
            <term>full/3</term>

            <listitem>
              <para>causes the bandwidth to be calculated as 1/3 of the full
              outgoing speed that is defined.</para>
            </listitem>
          </varlistentry>

          <varlistentry>
            <term>full*9/10</term>

            <listitem>
              <para>will set this bandwidth to 9/10 of the full
              bandwidth</para>
            </listitem>
          </varlistentry>
        </variablelist>

        <para>DO NOT add a unit to the rate if it is calculated !</para>
      </listitem>
    </itemizedlist>

    <para>The columns in the file are as follows.</para>

    <variablelist>
      <varlistentry>
        <term><emphasis role="bold">INTERFACE</emphasis> —
        <emphasis>interface</emphasis></term>

        <listitem>
          <para>Name of <emphasis>interface</emphasis>. Each interface may be
          listed only once in this file. You may NOT specify the name of an
          alias (e.g., eth0:0) here; see <ulink
          url="http://www.shorewall.net/FAQ.htm#faq18">http://www.shorewall.net/FAQ.htm#faq18</ulink></para>

          <para>You may NOT specify wildcards here, e.g. if you have multiple
          ppp interfaces, you need to put them all in here!</para>

          <para>Please note that you can only use interface names in here that
          have a bandwidth defined in the <ulink
          url="shorewall-tcdevices.html">shorewall-tcdevices</ulink>(5)
          file</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">MARK</emphasis> —
        <emphasis>value</emphasis></term>

        <listitem>
          <para>The mark <emphasis>value</emphasis> which is an integer in the
          range 1-255. You set mark values in the <ulink
          url="shorewall-tcrules.html">shorewall-tcrules</ulink>(5) file,
          marking the traffic you want to fit in the classes defined in
          here.</para>

          <para>You can use the same marks for different interfaces.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">RATE</emphasis> —
        <emphasis>rate</emphasis></term>

        <listitem>
          <para>The minimum bandwidth this class should get, when the traffic
          load rises. If the sum of the rates in this column exceeds the
          INTERFACE's OUT-BANDWIDTH, then the OUT-BANDWIDTH limit may not be
          honored.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">CEIL</emphasis> —
        <emphasis>rate</emphasis></term>

        <listitem>
          <para>The maximum bandwidth this class is allowed to use when the
          link is idle. Useful if you have traffic which can get full speed
          when more needed services (e.g. ssh) are not used.</para>

          <para>You can use the value <emphasis role="bold">full</emphasis> in
          here for setting the maximum bandwidth to the defined output
          bandwidth of that interface.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">PRIORITY</emphasis> —
        <emphasis>priority</emphasis></term>

        <listitem>
          <para>The <emphasis>priority</emphasis> in which classes will be
          serviced by the packet shaping scheduler and also the priority in
          which bandwidth in excess of the rate will be given to each
          class.</para>

          <para>Higher priority classes will experience less delay since they
          are serviced first. Priority values are serviced in ascending order
          (e.g. 0 is higher priority than 1).</para>

          <para>Classes may be set to the same priority, in which case they
          will be serviced as equals.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><emphasis role="bold">OPTIONS</emphasis> (Optional) —
        [<emphasis>option</emphasis>[<emphasis
        role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>

        <listitem>
          <para>A comma-separated list of options including the
          following:</para>

          <variablelist>
            <varlistentry>
              <term><emphasis role="bold">default</emphasis></term>

              <listitem>
                <para>This is the default class for that interface where all
                traffic should go, that is not classified otherwise.</para>

                <note>
                  <para>You must define <emphasis
                  role="bold">default</emphasis> for exactly one class per
                  interface.</para>
                </note>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">tos=0x</emphasis><emphasis>value</emphasis>[/0x<emphasis>mask</emphasis>]
              (mask defaults to 0xff)</term>

              <listitem>
                <para>This lets you define a classifier for the given
                <emphasis>value</emphasis>/<emphasis>mask</emphasis>
                combination of the IP packet's TOS/Precedence/DiffSrv octet
                (aka the TOS byte). Please note that classifiers override all
                mark settings, so if you define a classifer for a class, all
                traffic having that mark will go in it regardless of any mark
                set on the packet by a firewall/mangle filter.</para>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis
              role="bold">tos-</emphasis><emphasis>tosname</emphasis></term>

              <listitem>
                <para>Aliases for the following TOS octet value and mask
                encodings. TOS encodings of the "TOS byte" have been
                deprecated in favor of diffserve classes, but programs like
                ssh, rlogin, and ftp still use them.</para>

                <programlisting>        <emphasis role="bold">tos-minimize-delay</emphasis>       0x10/0x10
        <emphasis role="bold">tos-maximize-throughput</emphasis>  0x08/0x08
        <emphasis role="bold">tos-maximize-reliability</emphasis> 0x04/0x04
        <emphasis role="bold">tos-minimize-cost</emphasis>        0x02/0x02
        <emphasis role="bold">tos-normal-service</emphasis>       0x00/0x1e</programlisting>

                <note>
                  <para>Each of these options is only valid for ONE class per
                  interface.</para>
                </note>
              </listitem>
            </varlistentry>

            <varlistentry>
              <term><emphasis role="bold">tcp-ack</emphasis></term>

              <listitem>
                <para>If defined, causes a tc filter to be created that puts
                all tcp ack packets on that interface that have a size of
                &lt;=64 Bytes to go in this class. This is useful for speeding
                up downloads. Please note that the size of the ack packets is
                limited to 64 bytes because we want only packets WITHOUT
                payload to match.</para>

                <note>
                  <para>This option is only valid for ONE class per
                  interface.</para>
                </note>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Examples</title>

    <variablelist>
      <varlistentry>
        <term>Example 1:</term>

        <listitem>
          <para>Suppose you are using PPP over Ethernet (DSL) and ppp0 is the
          interface for this. You have 4 classes here, the first you can use
          for voice over IP traffic, the second interactive traffic (e.g.
          ssh/telnet but not scp), the third will be for all unclassified
          traffic, and the forth is for low priority traffic (e.g.
          peer-to-peer).</para>

          <para>The voice traffic in the first class will be guaranteed a
          minimum of 100kbps and always be serviced first (because of the low
          priority number, giving less delay) and will be granted excess
          bandwidth (up to 180kbps, the class ceiling) first, before any other
          traffic. A single VOIP stream, depending upon codecs, after
          encapsulation, can take up to 80kbps on a PPOE/DSL link, so we pad a
          little bit just in case. (TOS byte values 0xb8 and 0x68 are DiffServ
          classes EF and AFF3-1 respectively and are often used by VOIP
          devices).</para>

          <para>Interactive traffic (tos-minimum-delay) and TCP acks (and ICMP
          echo traffic if you use the example in tcrules) and any packet with
          a mark of 2 will be guaranteed 1/4 of the link bandwidth, and may
          extend up to full speed of the link.</para>

          <para>Unclassified traffic and packets marked as 3 will be
          guaranteed 1/4th of the link bandwidth, and may extend to the full
          speed of the link.</para>

          <para>Packets marked with 4 will be treated as low priority packets.
          (The tcrules example marks p2p traffic as such.) If the link is
          congested, they're only guaranteed 1/8th of the speed, and even if
          the link is empty, can only expand to 80% of link bandwidth just as
          a precaution in case there are upstream queues we didn't account
          for. This is the last class to get additional bandwidth and the last
          to get serviced by the scheduler because of the low priority.</para>

          <programlisting>        #INTERFACE  MARK  RATE    CEIL      MARK    OPTIONS
        ppp0        1     100kbit 180kbit   1       tos=0x68/0xfc,tos=0xb8/0xfc
        ppp0        2     full/4  full      2       tcp-ack,tos-minimize-delay
        ppp0        3     full/4  full      3       default
        ppp0        4     full/8  full*8/10 4</programlisting>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>FILES</title>

    <para>/etc/shorewall/tcclasses</para>
  </refsect1>

  <refsect1>
    <title>See ALSO</title>

    <para><ulink
    url="http://shorewall.net/traffic_shaping.htm">http://shorewall.net/traffic_shaping.htm</ulink></para>

    <para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
    shorewall-blacklist(5), shorewall-hosts(5), shorewall-interfaces(5),
    shorewall-ipsec(5), shorewall-maclist(5), shorewall-masq(5),
    shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
    shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
    shorewall-route_rules(5), shorewall-routestopped(5), shorewall-rules(5),
    shorewall.conf(5), shorewall-tcdevices(5), shorewall-tcrules(5),
    shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)</para>
  </refsect1>
</refentry>